apenetration tester is testing a network's vulnerability. one of the tests the penetration tester is checking is the ability to inject packets. which of the following tools allow for packet injection? (select all that apply.)

Answers

Answer 1

Answer:

- hping

- tcpreplay

Explanation:


Related Questions

A data analyst writes the code summary(penguins) in order to show a summary of the penguins dataset. Where in RStudio can the analyst execute the code? Select all that apply. R console pane
Source editor pane Environment pane
Files tab

Answers

Code execution in Rstudio is analyzed in the R console panel and the Source editor panel.

Rstudio

R is a programming language for statistical computing and graphics, and RStudio is an integrated development environment. RStudio Server runs on a remote server and allows online browser access to RStudio, while RStudio Desktop is a regular desktop application. It has graphing, history, debugging, and workspace management features, as well as a console-based syntax highlighting editor that supports direct code execution.

An excellent environment for statistical computing and design is provided by RStudio, which provides numerous statistical-related libraries. An advantage of using R for this project is R's ability to easily reproduce and share your analysis.

Learn more about RStudio: brainly.com/question/29342132

#SPJ4

2.40 write the decimal equivalents for these ieee floating point numbers. a. 0 10000000 00000000000000000000000 b. 1 10000011 00010000000000000000000 c. 0 11111111 00000000000000000000000 d. 1 10000000 10010000000000000000000

Answers

Answer:

A. 2

B. -17

C. Infinity

D. -3.125

Explanation:

c. a new shopping mall has obtained an ipv4 network address, 205.72.16.0 /24. management of the shopping mall would like to create 6 subnets with each subnet serving 32 hosts. could it be done? demonstrate the reason with numbers. (10 points)

Answers

The solution is 256-248 = 8, 16, and 24. The broadcast address of the 16 subnet, where this host is located, is 23, and the range of acceptable hosts is 17–22.

This equals 254 after subtracting the 2 reserved addresses. You will therefore receive 254 valid hosts with the chosen subnet mask. The ability to assign 62 hosts an IP Address via a /24 subnet would be possible regardless of whether the IP Address is private or public. /16 would produce 65,534 hosts (or 124.125.0.1 - 124.125.1) as a result. This indicates that a "/16" leaves the final 16 bits (or final two integers) available for usage in specified addresses and a "/8" leaves the final 24 bits available for use.

Learn more about address here-

https://brainly.com/question/16011753

#SPJ4

assuming a is the starting vertex for dfs and b is at the top of the stack after the first iteration of the while loop, which vertices are in the stack after the second iteration of the while loop?

Answers

The vertices that are in the stack after the second iteration of the while loop are ACD. The correct option is A.

What is a while loop?

A “WhileLoop is used to iterate over a certain block of code until a condition is met. The while statement, also known as the while loop, executes the sequence of statements between the do and end while keywords for as long as the specified condition holds true.

The condition expression is only tested at the beginning of each loop iteration. Because the number of iterations is unknown to the user ahead of time, this loop is also known as a pre-tested loop.

Therefore, the correct option is A, ACD.

To learn more about the while loop, refer to the link:

https://brainly.com/question/13148070

#SPJ1

The question is incomplete. Your most probably complete question is given below, the image is added below:

a user has opened a web browser and accessed a website where they are creating an account. the registration page is asking the user for their username (email address) and a password. the user looks at the url and the protocol being used is http. which of the following describes how the data will be transmitted from the webpage to the webserver?

Answers

Packets of the message are separated out. The recipient's equipment can still put the packets back together even if they are received out of sequence.

The computer sends a "GET" request to the server that hosts the web address once the user fills in the address. The GET request, which is made via HTTP, informs the TechTarget server that the user is trying to find the HTML (Hypertext Markup Language) code that defines the structure and appearance of the login page. Up until they arrive there, packets will move from machine to machine. The computer receiving the data puts together the packets like a puzzle as they come in to recreate the message. This idea underlies every data transfer over the Internet.

Learn more about machine here-

https://brainly.com/question/14417960

#SPJ4

consider the following constructor, which is intended to assign the parameter x to an instance variable also named x. what changes can be made for the code to work as intended?

Answers

The instance variable population could be returned instead of p, which is local to the constructor.

What is a constructor?

A constructor, in object-oriented programming, is a special method of a class or structure that initializes a newly created object of that type. A constructor call is made automatically each time an object is created.

Similar to an instance method, a constructor can be used to set an object's members to default or user-defined values. It typically has the same name as the class.

Since a constructor lacks a return type, despite looking similar, it is not a valid method. The constructor initializes the object, not running code to perform a task, and it is not allowed to be static, final, abstract, or synchronized.

Learn more about constructor

https://brainly.com/question/29692747

#SPJ1

forthe lac operon, the repressor protein is deactivated when the is present inside the cell increasing the amount of lac operon transcription

Answers

When the inducer is inside the cell, lac operon transcription is increased.

Explain about the inducer?

Molecular controls of gene expression are known as inducers. The two ways an inducer works are as follows: By neutralising repressors. Due to an inducer's interaction with a repressor, the gene is activated.

Both inactivating repressors and activating activator proteins are methods that inducer molecules use to promote transcription. By attaching to tryptophan in the trp operon, the trp repressor activates itself. So, if tryptophan is not required, the repressor is linked to the operator, and transcription is not turned on. Inducers include things like allolactose. The lac operon in Escherichia coli is controlled in terms of how lactose is expressed.

To learn more about inducer refer to:

https://brainly.com/question/13739807

#SPJ4

identify the correct term of the highlighted item in the code below. app.get('/painters/:painter id?', function (req, res) { ... }

Answers

The highlighted portion of the code is app.get.

what is code for a program?

Computer code, or a set of instructions or a system of rules defined in a specific programming language, is a term used in computer programming (i.e., the source code). It is also the name given to the source code after a compiler has prepared it for computer execution (i.e., the object code).

These include bar codes, ISBNs, ASCII codes, post codes, and bank account numbers; a check digit is a common checking mechanism used in many current codes. An illustration of this is the widespread usage of ISBN numbers on all new books today.

A system of communication signals or symbols. a set of assigned and frequently secret symbols (such as letters or numerals).

To learn more about code for a program refer to:

https://brainly.com/question/26134656

#SPJ4

[10 pts] how do you have to set up the control signals to transfer a numeric value from the main memory (ram) to the accumulator register on the brainless microprocessor?

Answers

STEPS :

To transfer a numeric value from the main memory (RAM) to the accumulator register on the brainless microprocessor, the appropriate control signals must be set up as follows:

1. Set the memory address register to the address of the numeric value in RAM.

2. Set the memory data register to the numeric value.

3. Set the memory read signal high.

4. Set the memory write signal low.

5. Set the accumulator write signal high.

6. Set the accumulator read signal low.

7. Set the accumulator address to the address of the accumulator register.

8. Clock the memory and accumulator control signals.

To know more about RAM
https://brainly.com/question/11411472
#SPJ1

You need to configure the FastEthernet 0/1 interface on a switch to automatically detect the appropriate link speed and duplex setting by negotiating with the device connected to the other end of the link.
Drag the command on the left to the approbate configuration step on the right to accomplish this. Not all of the commands may be required
Enter global configuration mode
conf t
Enter interface configuration mode
int fa0/1
Set speed of the interface
speed auto
Set the duplex setting for the interface
duplex auto

Answers

To configure the FastEthernet 0/1 interface on a switch to automatically detect the appropriate link speed and duplex setting by negotiating with the device connected to the other end of the link. The commands are as follows:

Enter global configuration mode
conf tEnter interface configuration mode
int fa0/1Set the speed of the interface
speed autoSet the duplex setting for the interface
duplex auto

What is an ethernet networking interface?

An Ethernet networking interface, often known as a network client, is a circuit board or card that is installed in a personal computer or workstation. A local area network (LAN) connection can be made by a computer or mobile device utilizing Ethernet as the transmission medium.

An Ethernet networking interface must adhere to a variety of Ethernet standards with various transmission speeds and error correction types/rates. A networking interface for an Ethernet network can use any type of transmission hardware, including fiber optic, coaxial copper, and wireless, depending on the capabilities of the hardware it is sending to or receiving from and the required network transfer rates.

Ethernet is a standard for the transmission of binary data, but even though its hardware characteristics are defined, it is hardware-independent.

To learn more about ethernet networking interface, use the link given
https://brainly.com/question/14775265
#SPJ4

open the code6-3 columns.css file and create a style rule for the article element to display the contents in a 3 column layout with a minimum column width of 350 pixels,

Answers

To open the code 6-3 column.css file and create a style rule following command will be used/* 1(a). style rule for article element*/

article{

/*setting column numbers*/

column-count: 3;

column-width: 350px;

/*setting gap between columns*/

column-gap: 20px;

/*setting rule parameters between columns*/

column-rule: 5px ridge rgb(231, 231, 231);

}

/* 1(b). style rule for h1 element*/

h1{

/*setting span across all columns*/

column-span: all;

/*setting alignment to center*/

text-align: center;

/*setting font size*/

font-size: 3.5em;

/*setting letter spacing*/

letter-spacing: 0.15em;

}

/* 1(c). style rule for paragraph element in article*/

article:: p{

/*setting minimum window size to 4 line*/

   widows: 4;

   /*setting minimum orphans to 4 line*/

   orphans: 4;

}

To learn more about code

https://brainly.com/question/497311

#SPJ4

An employee sets up an automation that transfers files in a specific folder on their PC to a remote drive for archiving, provided the files are more than six months old.
Which quality of automation is described in this example?
rule-based
cumulative
intrusive
complex

Answers

Automation that transfers files in a specific folder on their PC to a remote drive for archiving is rule-based automation

Rule base automation

The simplest forms of rule-based automation and machine intelligence lead to systems that apply man-made rules to store, sort, and manipulate data, and draw conclusions.

Rule-based decision-making is often referred to as procedure-based decision-making, which can help with many problems. Archive automation like the problem above is one of the problems that can be solved with rule based automation

Learn more about Automation : https://brainly.com/question/14628901

#SPJ4

a company hires security experts to play the role of hackers. the experts are asked to attempt to breach the infrastructure to determine how secure the company is from threats. the experts are also asked to recommend improvements. what is this activity called?

Answers

Since the company hires security experts to play the role of hackers. the experts are asked to attempt to breach the infrastructure to determine how secure the company is from threats. the experts are also asked to recommend improvements. This activity is called  penetration testing.

What is the use of penetration testing?

Penetration testing, also known as ethical hacking or pen testing, is the authorized simulation of a cyberattack on a computer system that is carried out to examine the system's security. This is distinct from vulnerability assessments.

Therefore, Penetration testing, often known as pen testing, is seen as a form of a security exercise where a cyber-security specialist looks for and attempts to attack weaknesses in a computer system. By simulating an attack, it is possible to find any security gaps that an attacker might exploit.

Learn more about penetration testing from

https://brainly.com/question/26555003
#SPJ1

Assume that the instruction pointer, EIP, initially contains 8510 and the assembly language representation of the instructions in memory starting at address 8510 is Instruction Address Instruction 85 SUB AL, Ox33 86.. JMP 242 Before the instruction sequence is executed, the flags are CF=1, ZF=0 and SF=0 and the Registers have the values AL=0x33, BL=0x4D CL=0xBE and DL=0x3C. What is the value of the instruction pointer after the sequence executes?

Answers

The number of televisions per capital is calculated by dividing the number of television sets by the total US population. In this case, we divide the 285 million television sets by the population of 298.4 million.

What is use of televisison?

This gives a result of 0.9551 televisions per capita. Note that this method (dividing the number by the population) also is used for calculating the per capita of many other things like GDP.

In this case, we divide the 285 million television sets by the population of 298.4 million. This gives a result of 0.9551 televisions per capita.

Therefore, The number of televisions per capital is calculated by dividing the number of television sets by the total US population. In this case, we divide the 285 million television sets by the population of 298.4 million.

Learn more about television on:

brainly.com/question/16925988

#SPJ1

*Write a program that prompts the user to enter the total number of students first. *Then ask the user to input each student’s grade and use loop statements to read in each grade. Check input grade to make sure 0<=grade<=100, if the user input any other number, print out warning message and ask the user to input a new grade. *Display the highest score, the lowest score, and the average.Here is the sample run:Please input the total number of students: 10Please input the students’ grade: 56 23 89 45 96 -45Grade must between 0 and 100.Please input another score: 45 12 85 74 65The highest grade is: 96The lowest grade is: 12The average grade is: 59Note: You do not need to use array to save each input score for this lab. A Single loop to read in each grade, compare with the current highest grade, lowest grade, and calculate the running sum at the same time.(Java)

Answers

Using knowledge in computational language in python it is possible to write a code that  prompts the user to enter the total number of students first. *Then ask the user to input each student’s grade and use loop statements.

Writting the code:

#calculating Average

   def calc_average(scores):

           return sum(scores)/len(scores)

   grade_dist = {

   (90, 101):'A',

   (80,90):'B',

   (70, 80):'C',

   (59, 70):'D',

   (0,59):'F'

   }

   def get_grade_freq(scores):

       grades = {'A':0, 'B':0, 'C':0, 'D':0, 'F':0}

       for score in scores:

         for k, v in grade_dist.items():

           if score in range(k[0], k[1]):

             grades[v]+=1

       print("Grade distributions")

       for grade, number in grades.items():

           print("Number of {}’s = {}".format(grade, number))

   def get_scores(n):

       scores = []

       cond = True

       while cond and n>0:

         score = int(input("Enter an exam score between 0 and 100 or -1 to end : "))

         if score==-1:

           cond=False

           return -1

         if score not in range(0,101):

             print("Sorry, {} is not in the range of 0 and 100 or -1. Try Again!".format(score))

         if score in range(0,101):

           scores.append(score)

           n-=1

       return scores

   def main():

       n = int(input('total number of exams ' ))

       scores = get_scores(n)

       if scores == -1:

           exit(-1)

       average = calc_average(scores)

       print("You entered {} valid exam scores with an average of {}.".format(n, average))

       get_grade_freq(scores)

   if __name__=='__main__':

       main()

See more about python at brainly.com/question/12975450

#SPJ1

Write the special method __str__() for CarRecord.
Sample output with input: 2009 'ABC321'
Year: 2009, VIN: ABC321
The following code is what I have came up with, but I'm receiving an error:
TYPEERROR: __str__ returned non-string
I can't figure out where I went wrong.

Answers

Model year and registration number of an automobile are displayed in the program's implementation of the car record class. This is how the Python 3 program works.

Car record class:

initialize the carRecord class.

__init (self) def

#define the class's init method

0 for self.year made

Initialized to 0 is the #year the car was built (integer)

auto.car vin = ""

The string #car registration is empty.

__str (self) def

#define a method for str

bring back "Year: self.year made, VIN: self.car vin"

# yields a formatted year and VIN number display.

carrecord = my car; ()

#creates a carRecord class instance

Year Made = int(input()) for my car

#asks the user for the vehicle's model year

input my car.car vin ()

#asks the user for the model's VIN.

print(my car)

# show the specifics

An example program run is provided.

To know more about Python click here:

https://brainly.com/question/18502436

#SPJ4

most websites provide information about what data is being collected, how it will be used, and why it is being collected. websites provide this information in order to satisfy which gapp principle?

Answers

Most websites provide information about what data is being collected, how it will be used, and why it is being collected. websites provide this information in order to satisfy the notice gapp principle.

What do you mean by big data?
Big data is defined as data that is so vast, quick, or complex that it is challenging or impossible to process using conventional techniques. For analytics purposes, it has long been practiced to access and store sizable amounts of data.

Unstructured data, such as text, documents, and multimedia files; semi-structured data, like web server logs and streaming data from sensors; and structured data, such as transactions and financial records, are all included in the broad category of big data.


To learn more about big data, use the link given
https://brainly.com/question/28507586
#SPJ4

you have installed anti-virus software on the computers on your network. you update the definition and engine files and configure the software to update those files every day. what else should you do to protect your systems from malware? (select two.)

Answers

Since you have installed anti-virus software on the computers on your network. The other things that you do to protect your systems from malware are options B and E:

Schedule regular full system scans.Educate users about malware.

Why is setting up an antivirus scan important?

This is often done so as to guarantee the ongoing health of your system, scheduled scans are essential. They regularly perform a thorough virus and other threat check on your systems. The difficulty with scheduled scans is figuring out when the systems will be accessible.

Therefore, one can say that any software that is seen as a form of malicious is one that has been purposefully created to disrupt a computer, server, client, or computer network, leak sensitive data, as well as been able to gain unauthorized access to data or systems, prevent users from accessing information, or inadvertently compromise a user's computer security and privacy.

Learn more about malware from

https://brainly.com/question/399317
#SPJ1

See full question below

You have installed anti-virus software on the computers on your network. You update the definition and engine files and configure the software to updates those files every day.

What else should you do to protect your systems from malware? (Select two.)

- Disable UAC.

- Educate users about malware.

- Enable chassis intrusion detection.

- Enable account lockout.

- Schedule regular full system scans.

Using technology, calculate the line of best fit. Identify and interpret the slope in this scenario. The slope of the line of best fit is 0. 25. Each time the shoe size increases by one, the height increases by 0. 25 inches. The slope of the line of best fit is 0. 25. Each time the shoe size increases by 0. 25, the height increases by one inch. The slope of the line of best fit is 66. 6. Each time the shoe size increases by one, the height increases by 66. 6 inches. The slope of the line of best fit is 66. 6. Each time the shoe size increases by 66. 6, the height increases by one inch.

Answers

According to the scatter plot, the slope in this case means that: The slope of the line of best fit is 0.25. The height rises by 0.25 inches for each shoe size increase of one.

What is scatter plot?

A scatter plot, also known as a scattergraph, scatter chart, scattergram, or scatter diagram, is a type of mathematical diagram that uses Cartesian coordinates to display values for typically two variables for a set of data.

An additional variable can be shown if the points are color-, shape-, or size-coded. The information is represented as a set of points, where each point's position on the horizontal axis and vertical axis is determined by the values of two variables.

A scatter plot can be used when both the continuous variables are independent of one another or when one continuous variable is controlled by the experimenter and the other depends on it.

Learn more about scatter plot

https://brainly.com/question/6592115

#SPJ1

how should you format your cover letter when sending it by e-mail? check all that apply. remove your e-mail address and phone number. remove tabs, bullets, and underlining. move your return address from the top of the letter to just below your name. place your return address at the top of the e-mail.

Answers

The way a person should format your cover letter when sending it by e-mail is option B and C:

Move your return address from the top of the letter to just below your name.Remove tabs, bullets, and underlining.

What is a resume cover letter?

This is a one-page business letter known as a cover letter is submitted with your resume when you apply for a job. Your cover letter should serve as a persuasive essay that explains to the employer why you are a strong candidate for the position.

Note therefore, that in Formatting a cover letter, do the below:

Give your contact information.Include today's date and the address of the hiring manager.Greeting should be included.Start with a paragraph of introduction.Your body paragraph(s) should go here.Add a concluding paragraph and a call to action to finish.Your signature should be inputted.

Learn more about cover letter from

https://brainly.com/question/12408389
#SPJ1

you need to create a shared folder on a computer running windows 10. it must have following parameters: located in c:\corpdata; domain users of practicelabs domain must have full access to it. which windows powershell command you need to run?

Answers

There are no quotation marks around the security group Domain Users or the domain name practicelabs, which prevents Windows from mapping account names to security IDs.

What is meant by Domain users?

Any user whose username and password are saved on a domain controller rather than the machine they are logging into is referred to as a domain user. The computer queries the domain controller to determine your privileges when you log in as a domain user.

Users who are added to the domain users group on a domain controller are known as domain users. At the server, these domain users can be centrally managed. While local users are those who have been added to the local system. You can choose users in BPC from one of these options alone or in combination.

The complete question is : You created a folder named "codeplans" on a domain member server. You want to share this folder and entered the following Windows PowerShell command:

New-SmbShare -Name "codeplans" -Path "c:\corpdata" -Fullaccess practicelabs\domain users

You get the following error message which you saved as a screenshot. What is cause of this error message?

To learn more about Domain user refer to :

https://brainly.com/question/14481481

#SPJ1

The IP address of Computer 1 is 192.168.200.10, and it has a subnet mask of 255.255.240.0. The IP address of Computer 2 is 192.168.195.200, and the IP address of Computer 3 is 192.168.230.40. (5 Points) a. How many bits of the IP address for Computer 1 are used to define its subnet? b. Are Computer 1 and Computer 2 part of the same subnet? Explain your answer. (show your calculation steps) c. Are Computer 1 and Computer 3 part of the same subnet? Explain your answer. (show your calculation steps)

Answers

By setting the host bits to all 0s and the network bits to all 1, a 32-bit integer known as a subnet mask is produced.

Every computer, printer, switch, router, and other device that is a part of a TCP/IP-based network is given a unique logical numeric address. A subnet is a distinct and recognizable area of a company's network that is often organized on a single floor, building, or geographic location. By convention, a gateway or router on a certain network is identified by an IP address that ends in ". 1". A broadcast address is one that ends in ". 255"; packets addressed to a broadcast address should be handled by all devices connected to the same network.

Learn more about network here-

https://brainly.com/question/13992507

#SPJ4

what wireless security method allows you to configure access points to only allow connections from specific physical addresses belonging to devices you trust

Answers

The wireless security method allows you to configure access points to only allow connections from specific physical addresses belonging to devices you trust is Ad hoc wireless configuration mode

What is the purpose of ad hoc mode?

In order to link two or more wireless devices to one another without the need of standard network infrastructure equipment, such as a wireless router or access point, a wireless ad hoc network, or WANET, is a sort of local area network (LAN).

Therefore, in regards to the above, the use of Ad-hoc mode describes a wireless network architecture that enables direct device-to-device communication. An independent basic service set is a feature that is added and is specified in the 802.11 set of specifications (IBSS). Peer-to-peer mode is yet another name for this form of wireless network.

Learn more about wireless configuration from

https://brainly.com/question/9979629
#SPJ1

What are the four layers of Geert Hofstede's "cultural onion"?

Answers

Answer:

Symbol, hero, ritual, value. 

Explanation:

will the 802.11protocol completely break down in this situation? discuss what happens when two stations, each associated with a different isp, attempt to transmit at the same time

Answers

The 802.11 protocol is designed to detect and resolve conflicts between stations when two devices attempt to transmit data at the same time. In this situation, when two stations associated with different ISPs attempt to transmit simultaneously, the protocol will detect the collision and initiate a process of collision resolution.

1. Will the 802.11protocol completely break down in this situation?

No, the 802.11 protocol will not completely break down in this situation. The protocol is designed to detect and resolve conflicts between stations.

When two stations attempt to transmit at the same time, the protocol will detect the collision and each station will wait a random amount of time before attempting to retransmit the data. If a collision occurs again, the protocol will increase the amount of time each station must wait before attempting to retransmit. This process helps to ensure that only one station can transmit at a time.

2. What happens when two stations, each associated with a different ISP, attempt to transmit at the same time?

When two stations, each associated with a different ISP, attempt to transmit at the same time, a collision is detected by the 802.11 protocol. The protocol then triggers a process of collision resolution, in which each station waits a random amount of time before attempting to retransmit the data. This process continues until only one station is transmitting, thus avoiding further collisions.

Learn more about the Two stations: https://brainly.com/question/2537310

#SPJ4

write the definition of a function power to, which receives two parameters. the first is a double and the second is an int. the function returns a double. if the second parameter is negative, the function returns zero. otherwise it returns the value of the first parameter raised to the power of the second.

Answers

The definition of a function power_to, which receives two parameters is:

def power_to(bdouble, bint):

if bint<0:

return 0

else:

return bdouble**bint

What are parameters?
A parameter is a unique type of variable that is used in a function to refer to one of the bits of data given to the function as input. These data points represent the values of the arguments used to call or invoke the function.

A function's definition often includes an ordered list of parameters so that the function's arguments are evaluated each time it is called and the resulting values can be assigned to the associated parameters.

To learn more about parameters, use the link given
https://brainly.com/question/29555936
#SPJ4

you are trying to push a memory module into a memory slot, but it is not seating properly. what is the most likely issue?

Answers

Assuming you are trying to push a memory module into a memory slot, but it is not seating properly, the most likely issue would be that: A) you are trying to install the memory module backwards in the memory slot.

What are the types of computer memory?

In Computer technology, there are two (2) main types of memory or storage location for software program (application) that are being used on a computer and these include the following;

Read only memory (ROM).Random access memory (RAM).What is RAM?

In Computer technology, RAM is an abbreviation for random access memory and it also referred to as a memory module or main memory. RAM can be defined as a volatile and temporary storage (memory) location that is used for currently opened software program (application) and computer data.

What is a memory?

A memory simply refers to a terminology that is used to describe the available space on an electronic device that is typically used for the storage of data or any computer related information such as the following:

VideosTextsMusicImagesCodesFolders

In conclusion, we can reasonably infer that a memory module would seat properly in a memory slot when it is installed in a backward.

Read more on memory here: brainly.com/question/24881756

#SPJ1

Complete Question:

You are trying to push a memory module into a memory slot, but it is not seating properly What is the MOST likely issue?

a)You are trying to install the memory module backwards in the memory slot.

b)You need to clear debris from the memory slot.

c)You need to push down the slot tabs and move them back.

d)You are trying to install a single-sided memory module in a double-sided slot.

at company headquarters, several employees are having issues with their wi-fi access suddenly dropping and then reconnecting to the same wireless network. you decide to investigate and determine that someone has set up a rogue access point near company headquarters and is using it to capture sensitive data from the company network. which type of social engineering attack is being used?

Answers

It is to be noted that if at company headquarters, several employees are having issues with their wi-fi access suddenly dropping and then reconnecting to the same wireless network, and you decide to investigate and determine that someone has set up a rogue access point near the company headquarters and is using it to capture sensitive data from the company network. This kind of social engineering is called: "Tailgating and Piggybacking attacks"

What is a social engineering attack?

Social engineering is the emotional manipulation of individuals into completing actions or disclosing secret information in the context of information security. This is distinct from social engineering, which does not include the disclosure of sensitive information.

Social engineering is a deception method that takes advantage of the human mistake to get sensitive information, access, or assets. These "human hacking" schemes in cybercrime tend to entice unwary individuals into disclosing data, propagating malware infections, or granting access to restricted systems.

Piggybacking, often known as tailgating, is a sort of social engineering assault that typically targets people in a physical setting.

One example is when an unauthorized individual follows an authorized user into a limited corporate area or system in order to acquire access.

Learn more about social engineering attacks:
https://brainly.com/question/14467106
#SPJ1

When logging into a website that uses a directory service, what command authenticates your username and password?.

Answers

Answer: Bind If you log into a website that uses a directory service, the website will use LDAP to check that user account is in the user directories and that the password is valid

Explanation:

Systems analysts use a(n) _____ test to verify that all programs in an application work together properly. (525)
a. unit
b. systems
c. integration
d. acceptance

Answers

Systems analysts use an unit test to verify that all programs in an application work together properly. So the answer is a. unit

Unit testing

Unit testing is a type of software testing that tests individual units or components of the software. Its purpose is to verify that each unit of software code is working as expected.

Unit tests are run by the developer during application development (coding phase). Unit tests isolate sections of code and verify their correctness. Units can be functions, methods, procedures, modules or individual objects.

Learn more about Unit Testing: https://brainly.com/question/22900395

#SPJ4

Other Questions
A company has 11 male and 8 female employees, and needs to nominate 2 men and 2 women forthe company bowling team. How many different teams can be formed? If you were to travel at a speed close to the speed of light, you could notice that your own. what quotients are equivalent to -48/-17 Find the y-intercept of the line x+y=7. How does Chaucer show literary influences and literary allusions in The Wife of Bath's Portrait and Tale? Include contextual references A quadrilateral has 4 sides. one angle of a regular quadrilateral measures (6w 13). determine the value of w. round to the nearest whole number. w = 13 w = 23 w = 59 w = 90 the key question you want to keep in mind while undertaking a social media audit is: ""what value is your organization adding to your customers through social media now vs. ?"" Brett is calculating 216 x23 2 1 6 x 2 3 l 6 4 8 0 4 3 2 l 6 9 1 2 ? What mistake has brett made what is the correct answer A chemical equation contains 4 hydrogen atoms and 2 oxygen atoms in the reactants. How many hydrogen and oxygen atoms should be in the products according to the law of conservation of matter? Responses 2 hydrogen atoms and 4 oxygen atoms 2 hydrogen atoms and 4 oxygen atoms 1 hydrogen atom and 1 oxygen atom 1 hydrogen atom and 1 oxygen atom, 4 hydrogen atoms and 2 oxygen atoms 4 hydrogen atoms and 2 oxygen atoms 5 hydrogen atoms and 1 oxygen atom 5 hydrogen atoms and 1 oxygen atom a patient has received epinephrine for treatment of anaphylaxis. which additional drug may be helpful to prevent recurrent anaphylaxis? Lead will react with hydrochloride acid in a ingle replacement reaction. How many mile of hydrochloric acid are needed to completely react with 0. 36 mol of lead what is one of the advantages of monetary policy over fiscal policy? group of answer choices the opportunity for broad political influence its control over the size of federal budget deficits it can guarantee an expansion of aggregate demand when needed the quickness with which it can be used light that is incident upon the eye is refracted several times before it reaches the retina. as light passes through the eye, at which boundary does the majority of the overall refraction occur? when a country opens its markets to international trade, if the world price is greater than the domestic equilibrium price,: Sam runs at a velocity of 18m/s due east. A strong wind traveling at 8m/s blows on bearing 230 calculate the resultant velocity using Cosine law medical gamma imaging is most often done with the technetium isotope 99tc, which decays by emitting a gamma-ray photon with energy 140 kev. what is the mass loss of the nucleus upon emission of this gamma ray? Ezra applied the distributive property to the expression 8(y+2). He then used the commutative property. Drag and drop expressions to the boxes to correctly complete the statements. Need help fast!!!!!!!!!!!Put responses in the correct input to answer the question. Select a reply, navigate to the desired information and insert the response. Responses can be selected and inserted using the space bar, enter key, left mouse button, or touchpad. Responses can also be moved by dragging with a mouse.After applying the distributive property, Ezra's expression was the Response area.After he used the commutative property, his expression was the Response area. a car is traveling at 104 km/h when the driver sees an accident 80 m ahead and slams on the brakes. what minimum constant deceleration is required to stop the car in time to avoid a pileup? (round your answer to two decimal places.) Forms of our depend upon. ? How to Graph y=1/2x-3/2