How many moles are in 16.2 grams of lithium ?
Answer:
6.941 moles
Explanation:
Explain the
purpose
of the heat exchanger in the nuclear power plant.
Answer:
yeah someone explain
Explanation:
tttttttttt%ttttttt
Answer:
A heat exchanger is device which is designed to transfer heat from one matter to another. In nuclear power plants, these heat exchangers are used to pass heat from primary system to the secondary system. In the process they produce steam from water, they are also called steam generators or pressurized water reactors.
Which statement best explains why an object appears green in sunlight?
A- The object absorbs most white light and refracts most green light.
B- The object refracts most white light and absorbs most green light.
C- More green light is absorbed while more red and blue light is reflected.
D- More green light is reflected while more red and blue light is absorbed.
Answer:
b
Explanation:
Iridium has two naturally occurring isotopes, Iridium-191 and Iridium-193. If the average atomic mass of orodum s 192.217, what are the average percent abundances of each isotope?
Answer:
The percent isotopic abundance of Ir-193 is 60.85 %
The percent isotopic abundance of Ir-191 is 39.15 %
Explanation:
we know there are two naturally occurring isotopes of iridium, Ir-191 and Ir-193
First of all we will set the fraction for both isotopes
X for the isotopes having mass 193
1-x for isotopes having mass 191
The average atomic mass is 192.217
we will use the following equation,
193x + 191(1-x) = 192.217
193x + 191 - 191x = 192.217
193x- 191x = 192.217 - 191
2x = 1.217
x= 1.217/2
x= 0.6085
0.6085 × 100 = 60.85 %
60.85% is abundance of Ir-193 because we solve the fraction x.
now we will calculate the abundance of Ir-191.
(1-x)
1-0.6085 =0.3915
0.3915× 100= 39.15 %
Before J.J. Thomson began gathering evidence about electrons in 1897, what did scientists know about atoms?
Answer: Scientists generally thought atoms were the smallest particles that could not be broken down any further.
Explanation: Trust me
To see the number of atoms of an element in a given molecule we need to multiply stoichiometry to the number that is written on the foot of the element that is stoichiometry. Scientists generally thought atoms were the smallest particles that could not be broken down any further.
What is atom?Atom is the smallest particle of any element, molecule or compound. Atom can not be further divided. Atoms contains nucleus in its center and electron that revolve around the atom in fixed orbit.
In the nucleus, proton and neutron are present. Electron has -1 charge while proton has +1 charge. Neutron is neutral that is it has no charge. So overall the charge of nucleus is due to only proton, not by neutron.
Before J.J. Thomson began gathering evidence about electrons in 1897. Scientists generally thought atoms were the smallest particles that could not be broken down any further.
Therefore, Scientists generally thought atoms were the smallest particles that could not be broken down any further.
To know more about atom, here:
https://brainly.com/question/13518322
#SPJ3
if compose means to put together then decompose means to what?
Answer:
Break apart
Explanation:
Decompose: to break down or cause to break down into component elements or simpler constituents.
Plz help it's due soon. Calculate the energy and frequency of red light having a wavelength of 6.55 x 10⁻7m.
Answer:
E = 3.035× 10-¹⁹J = 1.9eV
f = 4.58 × 10¹⁴Hz
Explanation:
wavelength = 6.55 × 10-⁷m
c = 3 × 10⁸m/s
f = ?
E = ?
a) f = c/wavelength
f = 3 × 10⁸/6.55 × 10-⁷
f = 4.58 × 10¹⁴Hz
b) E = hc/wavelength
E = 6.626×10-³⁴ × 3 × 10⁸/ 6.55 × 10-⁷
E = 3.035 × 10-¹⁹J
1ev = 1.6 × 10-¹⁹J
Therefore E = 3.035/1.6 = 1.9eV
Hope it's not too late man
Why is it important to know the weather?
Answer:
so you can dress based on how hot or cold it's gonna be outside
Use the periodic table to select which type of bond is present and which of the listed properties is most likely for each substance.
A =
B =
Cu3Zn2
O2
Answer:
A :metallic
B :conducts electricity as a solid
C :covalent
D :does not conduct electricity
Explanation:
Answer:
A = ✔ metallic
B = ✔ conducts electricity as a solid
C = ✔ covalent
D = ✔ does not conduct electricity
Explanation:
edge 2023
what is the molar mass of ammonium sulfite
Answer: 116.15 g/mol
Which chemical equation below is balanced to correctly represent the Law of Conservation of Mass?
Answer:
The 3rd equation.
Cl2 + 2NaBr —> 2NaCl + Br2
Explanation:
The law of conservation of matter (mass) states that matter can neither be created nor destroyed during a chemical reaction but can be transferred from one form to another. This implies that unbalanced chemical equation shows that matter (mass) has been created or destroyed.
Now, we shall determine which equation is balanced as follow:
1. 2Cl2 + NaBr —> 2NaCl + Br2
Reactant >>>>>>>> Product
4 Cl >>>>>>>>>>>> 2 Cl
1 Na >>>>>>>>>>>> 2 Na
1 Br >>>>>>>>>>>> 2 Br
Thus, the equation is not balanced.
2. Cl2 + NaBr —> NaCl + Br2
Reactant >>>>>>>> Product
2 Cl >>>>>>>>>>>> 1 Cl
1 Na >>>>>>>>>>>> 1 Na
1 Br >>>>>>>>>>>> 2 Br
Thus, the equation is not balanced.
3. Cl2 + 2NaBr —> 2NaCl + Br2
Reactant >>>>>>>> Product
2 Cl >>>>>>>>>>>> 2 Cl
2 Na >>>>>>>>>>> 2 Na
2 Br >>>>>>>>>>>> 2 Br
Thus, the equation is balanced.
From the illustration made above only the 3rd equation is balanced. And this is in line with the law of the Conservation of matter (mass) as matter (mass) was not created nor destroyed during the chemical reaction but was transferred to other forms.
Atoms and elements are examples of
Answer:
A particular atom will have the same number of protons and electrons and most atoms have at least as many neutrons as protons. An element is a substance that is made entirely from one type of atom. For example, the element hydrogen is made from atoms containing just one proton and one electron.
What reaction would the chemical equation 2H2O→2H2+O2 represent?
combustion of water
decomposition of water
replacement of water
formation of water
Answer:
decomposition of water
Explanation:
The reaction will represent the decomposition of water. It usually carried by an electrolytic process in the laboratory.
Water molecule is broken down into its constituent hydrogen gas and oxygen gas components. The breaking down of one compound to give other compounds is decomposition. This is not a replacement reaction. In decomposition, we often start with a single reactant and results in one or more products.Answer:
decomposition of water
Explanation:
i took the quiz and it was right
if the percentage yield of a reaction is 85%
Answer: % yield
=
actual yield
theoretical yield
⋅
100
%
So, let's say you want to do an experiment in the lab. You want to measure how much water is produced when 12.0 g of glucose (
C
6
H
12
O
6
) is burned with enough oxygen.
C
6
H
12
O
6
+
6
O
2
→
6
C
O
2
+
6
H
2
O
Since you have a
1
:
6
mole ratio between glucose and water, you can determine how much water you would get by
12.0
g glucose
⋅
1 mole glucose
180.0 g
⋅
6 moles of water
1 mole glucose
⋅
18.0 g
1 mole water
=
7.20
g
This represents your theoretical yield. If the percent yield is 100%, the actual yield will be equal to the theoretical yield. However, after you do the experiment you discover that only 6.50 g of water were produced.
Since less than what was calculated was actually produced, it means that the reaction's percent yield must be smaller than 100%. This is confirmed by
% yield
=
6.50 g
7.20 g
⋅
100
%
=
90.3
%
You can backtrack from here and find out how much glucose reacted
65.0 g of water
⋅
1 mole
18.0 g
⋅
1 mole glucose
6 moles water
⋅
180.0 g
1 mole glucose
=
10.8
g
Explanation:
Answer:no answer,
Explanation: but if the other dude see this can you re word Wht u said it’s hard to make sense of it
Identify each statement below as an example of science or pseudoscience.
If food dropped on the floor is picked up within 5 seconds, it is okay to eat.
science or pseudoscience
Answer: pseudoscience
Explanation:
Edge 2020
Answer: pseudoscience
Explanation: It is an opinion that is subjective.
How many moles of KCl are contained in this solution?
0.486 L of a 2.0 M KCl solution
Answer:
0.972mol
Explanation:
Given parameters:
Volume of Solution of KCl = 0.486L
Molarity = 2.0M
Unknown:
Number of moles of KCl in solution = ?
Solution:
To find the number of moles of KCl in this solution, use the expression below;
Number of moles = molarity x volume
Insert the parameters and solve;
Number of moles = 0.486 x 2 = 0.972mol
Question:
A. Does this picture show a physical or chemical change? How do you know?
B. Does this picture show a physical or chemical change? How do you know?
Answer:
A. Chemical
B. physical
Explanation:
Write down the names of compounds represented by the following formulae:
a. Al2(SO4)3
b. CaCl2
c. K2SO4
d. KNO3
e. CaCO3
Hellp plss
The compounds have been formed by the combination of molecules and atoms. The names are a. aluminum sulfate, b. calcium chloride, c. potassium sulfate, d. potassium nitrate, and e. calcium carbonate.
What is the chemical formula?The chemical formula has been defined as the representation of the chemical compound or molecules with the aid of symbols, letters, and coefficients to show the proportions, arrows, parentheses, signs, etc.
The chemical formulas are named as:
Al₂(SO₄)₃ - aluminum sulfate. It has been used in purifying water, sewage treatment, tanning, paper industries, etc.CaCl₂ - calcium chloride. It is an ionic compound used in making electrolytes and sports drinks.K₂SO₄ - potassium sulfate. It has been used for making fertilizers for tobacco and vegetable crops.KNO₃ - potassium nitrate. It is an oxidizer used for making explosives and fertilizers.CaCO₃ - calcium carbonate. It is used as a dietary product to satisfy the needs for calcium and vitamin D for bone strengthening and formation.Learn more about chemical formulas, here:
https://brainly.com/question/16950183
#SPJ6
how many single covalent bonds does beryllium form in BeCl2?
Answer:
what I'm not really understand this question
What happens to water when it freezes
A: It’s mass increases
B: its mass decreases
C: Its density increases
D: Its density decreases
Answer:
D. It's density decreases
I'm not sure ok.. Ask an adult for making sure
write the electron configurations for the elements that are identified only by these numbers
a. 15 b. 12 c. 9 d. 18
atomic number 15
1S^2,2S^2,2P^6,3S^2,3P^3
atomic number 12
1S^2,2S^2,2P^6,3S^2
atomic number 9
1S^2,2S^2,2P^5
atomic number 18
1S^2,2S^2,2P^6,3S^2,3P^6
How do you think dolphins find food in dark water, especially if
what they are looking for does not make any noise? What other
sense might they use to "see” without using their eyesight?
Answer: Dolphins use the sense (sound) to find food in dark water.
Explanation: Echolocation allows dolphins to “see" by interpreting the echoes of sound waves that bounce off of objects near them in the water. To echolocate objects nearby, dolphins produce high-frequency clicks. ... This information is critical for dolphins to find food and navigate in dark or murky waters.
What is the mass of 2.23 x 10^23 atoms of sulfur?
Answer: 32.07 g/mole
Explanation:
1 mole of sulfur contains 6.022 ×10^23 atoms
1 mole is equal to 32.07 g
6.022 ×10^23 atoms = 32.07
Screenshot very easy
1. option B
2. ground state Fe : [Ar] 4s² 3d⁶
Further explanationAufbau rule
Electrons occupy orbitals of the lowest energy level
Charging electrons in the sub-shell uses the following sequence:
1s², 2s², 2p⁶, 3s², 3p⁶, 4s², 3d¹⁰, 4p⁶, 5s², 4d¹⁰, 5p⁶, 6s², etc.
So the correct choice of answer is B.
Ground state is the state of electrons filling skins with the lowest energy levels.
Excited state is the state of electrons which occupy a higher energy level
The atomic number of Fe = 26, so electrons=26
Ground state configuration of Fe : [Ar] 4s² 3d⁶ or
1s², 2s², 2p⁶, 3s², 3p⁶, 4s², 3d⁶
Answer:
d
Explanation:
We cooleda water bottle so the volume was lowered to .050 L, then we heated it to 373 K and thevolume increased to .10 L. What was the initial temperature?
Answer:
[tex]186.5\ \text{K}[/tex]
Explanation:
[tex]V_1[/tex] = Initial volume = 0.05 L
[tex]V_2[/tex] = Final volume = 0.1 L
[tex]T_1[/tex] = Initial temperature
[tex]T_2[/tex] = Final temperature = 373 K
From the ideal gas law we have
[tex]PV=nRT[/tex]
So
[tex]V\propto T[/tex]
[tex]\dfrac{V_1}{V_2}=\dfrac{T_1}{T_2}\\\Rightarrow T_1=\dfrac{V_1}{V_2}\times T_2\\\Rightarrow T_1=\dfrac{0.05}{0.1}\times 373\\\Rightarrow T_1=186.5\ \text{K}[/tex]
The intial temperature is [tex]186.5\ \text{K}[/tex].
PLEASE HELPPPPP :(
Megan likes to take hot showers before she goes to bed. She makes sure that the temperature of the water is warm enough to create steam. When she gets out of the shower, she has to wipe the mirror because there is so much water on it. Which statement best describes why there is water on the mirror?
A. The steam collected on the mirror and got cooler, causing it to condense into water droplets.
B. The steam collected on the mirror and got warmer, causing it to condense into water droplets.
C. The steam collected on the mirror and then boiled, leaving behind water droplets.
D. The steam collected on the mirror and then evaporated, leaving behind water droplets.
Answer:
A
Explanation:
Liquid octane will react with gaseous oxygen to produce gaseous carbon dioxide and gaseous water . Suppose 1.1 g of octane is mixed with 1.04 g of oxygen. Calculate the maximum mass of carbon dioxide that could be produced by the chemical reaction. Round your answer to significant digits.
Help please I don’t know
Answer:
I don't EXACTLY know but hopefully the description below helps you find the answer!
Ionic bonding is a type of chemical bond in which valence electrons are lost from one atom and gained by another. This exchange results in a more stable, noble gas electronic configuration for both atoms involved. An ionic bond is based on attractive electrostatic forces between two ions of opposite charge.
Explanation:
Assignment
Name the type of bond present in each of the following
compounds
Aluminium Oxide ,Al3 O₂)
Answer:
[tex]\boxed {\boxed {\sf Ionic \ bond}}[/tex]
Explanation:
First, let's look at the Periodic Table.
We see that aluminum is a metal, while oxygen is a non-metal.
Now, let's recall three types of bonds
Ionic: typically forms between a metal and a non-metal Covalent: usually forms between non-metals Metallic: tends to form with metalsSince we have a metal (Al) and a non-metal (O), aluminum oxide must have an ionic bond.
omg can somebody please help me with these 2 questions
Answer: Q4=1 Q5=2
Explanation:
Best of luck.
Answer:
4. '4' "pathogens can interfere with normal life functions."
5. '2' "synthesizing antibodies that mark these organisms to be destroyed."
Explanation: