Answer This!!!!!!
I'll give brainliest to whoever gets it right.

The tension in the cable between the blocks, T₂, is [tex]\frac{2T_i}{7}[/tex]

The given parameters:

The net force on the block system is calculated by applying Newton's second law of motion as follows;

Total mass of the block-system = 2 kg + 5 kg = 7 kg

The acceleration of the block-system;

[tex]a = \frac{T_i}{7}[/tex]

The tension in the cable between the blocks, T₂, is calculated as;

[tex]T_2 = m_2 a\\\\T_2 = 2a\\\\T_2 = 2 \times \frac{T_i}{7} \\\\T_2 = \frac{2T_i}{7}[/tex]

Thus, the tension in the cable between the blocks, T₂, is [tex]\frac{2T_i}{7}[/tex].

Learn more about acceleration of two connected block systems here: https://brainly.com/question/25939890

Answer:

no

Explanation:

u flipped it i cant see

The tangential speed of a wad of chewing gum to the rim of the wheel is approximately 1337.659 centimeters per second.

Let suppose that the wheel rotates at constant angular speed ([tex]\omega[/tex]), in radians per second, the tangential speed of a wad of chewing gum to the rim of the wheel ([tex]v[/tex]), in centimeters per second, is:

[tex]v = 2\pi\cdot r\cdot f[/tex] (1)

Where:

If we know that [tex]f = 5.13\,hz[/tex] and [tex]r = 41.5\,cm[/tex], then the tangential speed of the chewing gum is:

[tex]v = 2\pi\cdot (41.5\,cm)\cdot (5.13\,hz)[/tex]

[tex]v \approx 1337.659\,\frac{cm}{s}[/tex]

The tangential speed of a wad of chewing gum to the rim of the wheel is approximately 1337.659 centimeters per second.

To learn more on angular speed, we kindly invite to check this verified question: https://brainly.com/question/9684874

Answer:

I believe the answer is speed up.

Explanation:

this is because when water heats up the molecules move father apart from each other they speed up, eventually causing the water to boll

Answer:

ıf u find the answer can u comment me to notification thank u

Explanation:

Answer:

0 N

Explanation:

Uniform velocity means no acceleration and therefore no net force.

Answer:

The answer would be A. The waves that heat a cup of water in a microwave oven

Answer:

I use mercury thermometer to measure the temperature above 80°C because the boiling point of alcohol is 78°C . So, it can't measure the temperature above 78°C.

The acceleration due to gravity would be 5.95 m/s²

A force is known to be a push or pull and it is the change in momentum per time. It can be expressed by using the relation.

From the parameters given:

By replacing the given values into the above equation, we can determine the acceleration.

∴

625 N = 105 kg × acceleration.

[tex]\mathbf{acceleration = \dfrac{625 \ N}{105 \ kg}}[/tex]

acceleration = 5.95 N/kg

acceleration = 5.95 m/s²

Learn more about acceleration(a) here:

https://brainly.com/question/14344386

Answer:

pressure in liquids is given as:

P= hpg

where h is the depth

where p is the density

where g is 10

Explanation:

From the formula above

p = 10 X 1000 X 10

p = 100000N/m

Answer:

Don't light up the firework or put less fire

Explanation:

Using Pharaoh's serpent or "black snake" firework could be  done to slow down their reaction.

Gunpowder is typically made using three reagents: potassium nitrate, carbon, and Sulphur. These kinds of elements are used in a combustion reaction that results in this detonation explosion. You have solid reagents reacting to produce gases in the form of solid potassium carbonate, solid potassium sulphate, nitrogen gas, and carbon dioxide gas.

The numerous metal salts that are added to produce the colours spread out all of that material, which is in a super-heated state. In such extremely intense environment, the metal salts heat up and get "excited," emitting light as a result.

If you want an explosion, you need the chemical reaction to go quickly in order to release a large volume of gas in a brief period of time. You might have a chemical reaction that happens rather slowly, like the Pharaoh's serpent or "black snake" firework.

Find more about fireworks in the link:

https://brainly.com/question/16737516

#SPJ2

Answer:

1/2 m v^2 + 1/2 I ω^2 = m g h       conservation of energy

I = 2/5 m R^2     inertia of solid sphere

1/2 m v^2 + 1/5 m ω^2 R^2 = m g h

1/2 v^2 + 1/5 v^2 = g h

v^2 = 10 g h / 7 = 1.43 * 9.80 * 19 m^2/s^2 = 266 m^2/s^2

v = 16.3 m/s

v = R ω

ω = 16.3 / .6 = 27.2 / sec

Explanation:

a) Here is the free-body diagram. Note that I included the components of the weight mg (shown in dotted arrows) for use in the other parts of the problem.

b) The component of the weight parallel to the plane (shown in the diagram as a dotted arrow along the x-axis) is [tex]mg\sin15[/tex] and it is equal to

[tex]mg\sin15 = (25\:\text{kg})(9.8\:\text{m/s}^2)\sin15 = 63.4\:\text{N}[/tex]

c) Applying Newton's 2nd law to the y-axis, we can write

[tex]y:\;\;\;N - mg\cos15 = 0 \Rightarrow N = mg\cos15[/tex]

[tex]N = (25\:\text{kg})(9.8\:\text{m/s}^2)\cos15 = 236.7\:\text{N}[/tex]

d) The component of the weight mg into the plane is the same as the normal force, hence it's also 236.7 N.

e) To solve for the coefficient of friction, we apply Newton's 2nd law to the x-axis:

[tex]x:\;\;\;mg\sin15 - F_f = 0[/tex]

[tex]\Rightarrow F_f = mg\sin15\;\;(2)[/tex]

where [tex]F_f[/tex] is the frictional force defined as [tex]F_f = \mu N[/tex] so we can use Eqn(1) on Eqn (2) to write

[tex]\mu (mg\cos15) = mg\sin15[/tex]

Solving for [tex]\mu,[/tex] we get

[tex]\mu = \dfrac{\sin15}{\cos15} = \tan15 = 0.27[/tex]

Answer:

Explanation:

acceleration phase

average speed was 21.9/2 = 10.95 m/s

distance covered is 10.95 m/s(16.8 s) = 183.96 m

distance at top speed 21.9 m/s(16.4 s) = 359.16 m

distance while decelerating (0² - 21.9²)/(2(-1.8)) = 133.225 m

total = 183.96 + 359.16 + 133.225 = 676.345 = 676 m

Answer:

Weathering and erosion

Explanation:

Answer:

26 g's

Explanation:

Hope this helps~

Have a great day

Zero

Ans: 62.5

Explanation: [tex]F{net}[/tex] = m x a

                    1N = 1kg x 1m/ [tex]s{2}[/tex]

Answer:its  10

Explanation:

Answer:

8

Explanation:

Answer:

Explanation:

F = ma

F = 55000 kg(10.4)

F = 572000 N

That is an amazingly large elephant, more like 11 elephants

A more typical mass for a single elephant would be 5000 kg with a weight on Saturn of 52000 N

Answer:

Nuclear medicine or PET scanning (Positron Emission Tomography)

Explanation:

Not super sure what your question is looking for but I think it can be either. PET is a technology used in the nuclear medicine field, and nuclear medicine is a broad field of using the technology the question described.

Answer:a)   λ = 4.862 10⁻⁷ m,  b)  λ = 4.341 10⁻⁷ m

Explanation:

The spectrum of hydrogen can be described by the expression

in the case of the initial state n = 2 this series is the Balmer series

a) Find the wavelength for n = 4

let's calculate

          = 1,097 10⁷ ()

         \frac{1}{ \lambda} = 1.097 10⁷ 0.1875 = 0.2056 10⁷

          λ = 4.862 10⁻⁷ m

b) n = 5

    \frac{1}{ \lambda} = 1,097 10⁷ ()

    \frac{1}{ \lambda} = 1.097 10⁷ 0.21 = 0.23037 10⁷

     λ = 4.341 10⁻⁷ m

The two fundamental ways energy and momentum are moved from one

place to another are through the mass and velocity.

The formula for momentum is mass multiplied with velocity.

Momentum= mass × velocity

The two factors in which momentum and energy is moved from one place to

another is however through how much and how fast the object is moving

which validates the answer.

Read more on https://brainly.com/question/1042017

18,000 degrees in one second i believe

Answer:

False.

Explanation:

provided the distance between the forces remains the same, the force will increase with increased charge, whether attractive or repulsive.

Answer:

True;   ar = v^2 / R      Radial acceleration because it moves in a circular path

    at = α R = tangential acceleration because its speed changes

a = at + ar    total acceleration equals sum of radial and tangential

Answer:  Your answer Is A)

Explanation:    

Its direction of deflection shows it possitively charged

It brings one element into another by bombardment(transmutation)

Answer:

Explanation:

                            F = ma

mgsinθ - μmgcosθ = ma

      gsinθ - μgcosθ = a

                   μgcosθ = gsinθ - a

                              μ = (gsinθ - a) / gcosθ

                              μ = (9.81sin24 - 0.245) / 9.81cos24

                              μ = 0.4178906...

                              μ = 0.418

The coefficient of kinetic friction will be equal to 0.418.

Friction is the force that prevents solid surfaces, fluid layers, and material elements from sliding against each other. There are various kinds of friction: Dry friction is the force that opposes the relative lateral motion of two in-touch solid surfaces.

Given that a 1.95 kg box sits on an incline of 24 ° with the horizontal. If the box accelerates down the incline at 0.245 m/s 2

The coefficient of kinetic friction will be calculated as,

F = ma

mgsinθ - μmgcosθ = ma

gsinθ - μgcosθ = a

μgcosθ = gsinθ - a

Solve for the value of the coefficient of friction,

μ = (gsinθ - a) / gcosθ

μ = (9.81sin24 - 0.245) / 9.81cos24

μ = 0.4178906...

μ = 0.418

Therefore, the coefficient of kinetic friction will be equal to 0.418.

To know more about the coefficient of friction follow

https://brainly.com/question/29719172

#SPJ2