Answer:
1. 12 g/cm³
2. 0.5 m
Explanation:
1.
The weight of the gold is 240 g
The volume is 20 cm³
Density = Mass/ volume
Density = 240 / 20 = 12 g/cm³
2.
The formula for moment of a force is ;
Force * distance perpendicular between force and the turning point of force
Given that the moment of force is 12.5 Nm and force is 25 N then the perpendicular distance between the force and the turning point will be;
12.5 = 25 * d
12.5/25 = d
0.5 = d
d= 0.5 m
HELP! WILL GIVE BRAINLIST!!!
- What effect do oceans have on the climate?
a. Oceans produce extreme cold.
b. Oceans moderate temperatures and climate.
c. Oceans have little effect climate.
d. Oceans create extreme temperatures.
Answer:
b. Oceans moderate temperatures and climate.
Explanation:
i had this on my quiz and it was right =]
A fish swimming at a rate of .6 m/s notices a huge shark. Three seconds later, the fish is swimming at a speed of 3 m/s. What is the fish's acceleration?
0.8 m/s/s
-0.8 m/s/s
12.5 m/s/s
-12.5 m/s/s
Answer:
C
Explanation:
???
i think
4. Bob creates his personal profile collage by drawing his favorite things. This is his ___________.
A. artistic self
B. social self
C. professional self
D. private self
why is physics to study the heat absorbed by the ocean
Answer:
Heat is a source of energy
Explanation:
Just took the test
You will get the most accurate resting heart rate if you take your pulse for ___ consecutive mornings and average the number
A: 3
B: 4
C: 5
If your friend pushes a lawnmower four times as far as you do while exerting only half the force, which one of you does more work
Answer:
Him
Explanation:
He will push less but more and he will use more energy
A body moving in a straight line has a uniform motion if it travels ---------- distance in -------- intervals og time
Answer:
uniform an uniform
please fill it like yhis
Hurricane or typhoons occur when large areas of the open ocean soak up heat from the sun t or f
Answer: true
Explanation:
- During a certain period, the angular position of a rotating object is given by: = − + , where is in radian and t is in seconds. Determine the angular position, angular speed, and angular acceleration of the rotating object at = Sec.
The question is not complete. The complete question is :
During a certain period of time, the angular position of a rotating object is given by [tex]$\theta =2t^2 +10t+5$[/tex], where θ is in radians and t is in seconds. Determine the angular position, angular speed, and angular acceleration of the door (a) at t = 0.00 seconds, (b) at t = 3.00 seconds.
Solution :
Given :
Displacement or angular position of the object, [tex]$\theta =2t^2 +10t+5$[/tex]
∴ Angular speed is [tex]$\omega = \frac{d \theta}{dt}$[/tex]
ω = 10 + 4t
And angular acceleration is [tex]$\alpha = \frac{d \omega}{dt}$[/tex]
α = 4
a). At time, t = 0.00 seconds :
Angular displacement is [tex]$\theta =2t^2 +10t+5$[/tex]
[tex]$\theta =2(0)^2 +10(0)+5$[/tex]
= 5 rad
Angular speed is ω = 10 + 4t
ω = 10 + 4(0)
= 10 rad/s
Angular acceleration is α = 4 [tex]$rad/s^2$[/tex]
b). At time, t = 3.00 seconds :
Angular displacement is [tex]$\theta =2t^2 +10t+5$[/tex]
[tex]$\theta =2(3)^2 +10(3)+5$[/tex]
= 53 rad
Angular speed is ω = 10 + 4t
ω = 10 + 4(3)
= 22 rad/s
Angular acceleration is α = 4 [tex]$rad/s^2$[/tex]
An illustration of a ball sitting at the top of a hill of height labeled h Subscript 1 Baseline = 2 m. A the the bottom of the hill it levels off and the leveled surface is at a height labeled h Subscript 2 Baseline = .5 m. A ball is released from the top of a hill. How fast is the ball going when it reaches the base of the hill? Approximate g as 10 m/s2 and round the answer to the nearest tenth. m/s
Answer:
5.5 m/s
Explanation:
Right on Edge
The statement explains the importance of enzymes that check for and repair mistakes during DNA replication is the enzymes prevent many genetic mutations from being expressed. Thus, the option C is correct.
What is RNA polymerase?RNA polymerase is an enzyme that aids in the transcription of DNA into RNA during transcript in the nucleus. The enzymes prevent many genetic mutations from being expressed.
Primase is an enzyme that synthesizes short RNA sequences called primers. These primers serve as a starting point for DNA synthesis during replication as the DNA polymerases cannot begin the synthesis of the new strand, they only extend it after primase begins it and primase produces RNA molecules, the enzyme can be said to be a type of RNA polymerase.
Therefore, The statement explains the importance of enzymes that check for and repair mistakes during DNA replication is the enzymes prevent many genetic mutations from being expressed. Thus, the option C is correct.
Learn more about genetic mutations on:
brainly.com/question/1282397
#SPJ6
As a horse finishes its trot around the corral, it slows from 4m/s to a stop in 3
seconds. Calculate the acceleration of the horse.
You bought a helium balloon for a friend’s winter birthday. The outside temperature was -34 degrees C. The store was at a comfortable 298K. The volume of the balloon immediately after the store clerk filled it was 6 liters. What was the volume after you brought it outside? Show your work. Make sure to include units.
Answer:
4.81 L
Explanation:
From the question given above, we obtained the following information:
Initial temperature (T₁) = 298 K
Initial Volume (V₁) = 6 L
Final Temperature (T₂) = – 34 °C
Final Volume (V₂) =?
Next, we shall convert – 34 °C to Kelvin temperature. This can be obtained as follow:
T(K) = T(°C) + 273
T(°C) = – 34 °C
T(K) = – 34 + 273
T(K) = 239 K
Thus, –34 °C is equivalent to 239 K
Finally, we shall determine the final volume of the balloon as follow:
Initial temperature (T₁) = 298 K
Initial Volume (V₁) = 6 L
Final Temperature (T₂) = 239 K
Final Volume (V₂) =?
V₁ / T₁ = V₂ / T₂
6 / 298 = V₂ / 239
Cross multiply
298 × V₂ = 6 × 239
298 × V₂ = 1434
Divide both side by 298
V₂ = 1434 / 298
V₂ = 4.81 L
Thus, the volume of the balloon when it was brought outside the store was 4.81 L.
How does an increase in thermal energy affect the state of matter?
Answer:
When thermal energy is added to a substance, its temperature increases, which can change its state from solid to liquid (melting), liquid to gas (vaporization), or solid to gas (sublimation). ... When the pressure exerted on a substance increases, it can cause the substance to condense.
Explanation:
Hope it will help use
Shows a car travelling around a bend in the road. The car is travelling at a constant speed. There is a resultant force acting on the car. This resultant force is called the centripetal force. (i) In which direction, A, B, C or D, does the centripetal force act on the car? Tick ( ) one box. A B C D (1) (ii) State the name of the force that provides the centripetal force.
Answer:
This question is incomplete
Explanation:
This question is incomplete but the missing figure is in the attachment below.
When an object is travelling around a circular path, there is a force that tends to draw that object towards the center of the circular path and keep the object moving in the curved path, that force is called the centripetal force. From this description, it can be deduced that the direction of the centripetal force that acts on the car (in the attachment below) is D.
The name of the force that provides this centripetal force is frictional force. This is the force that prevents the car from slipping off the road; keeping it moving in the curved path.
a TV set is pushed a distance of 2 m with a force of 20 N how much work is done on the set
Answer:
40 J
Explanation:
water is not used as thermometric liquid.why?
Answer:
Water cannot be used in thermometer because of its higher freezing point and lower boiling point than other liquids . If water is used in a thermometer , it will start phase change at 0[tex]degree\\[/tex]C and 100[tex]degree[/tex]C and will not measure temperature , out of this range . This range is very small as compared to other liquids as mercury , having freezing point about −39[tex]degree[/tex]C and boiling point 356[tex]degree[/tex]C.
Explanation:
An object at rest has no net force acting on it.
True or False
Answer:
True
Explanation:
The object is at rest, which means it's not moving, so there is no net force on it, according to Newton's First Law.
Physical values in the real world have two components: magnitude and
Answer:
Dimension.
Explanation:
Why do these two magnets attract each other?
A. The poles that face each other are opposite magnetic poles.
B. The poles of one magnet cause the other magnet to have a
magnetic field.
C. The magnetic fields leave the magnets and concentrate between
them.
D. The magnetic field is weaker between the two magnets.
Answer:
A
Explanation:
When two magnets are brought near each other, like poles repel; opposite poles attract. We like to represent this force effect of a magnet on iron-like objects with a concept called magnetic field. The concept of field can be best understood if we remember the gravitational force of Earth on object near it.
Every magnet has two poles. The same pole repels while opposite poles attract each other. Option (A) is correct. The poles that face each other are opposite magnetic poles.
What is a magnet?A magnet is a substance or item that generates a magnetic field. This magnetic field is invisible, but it is responsible for a magnet's most remarkable property.
A force that attracts or repels other ferromagnetic elements such as iron. Every magnet has two poles. The same pole repels while opposite poles attract each other.
Due to polarity Option (A) is correct. Hence the poles that face each other are opposite magnetic poles.
To learn more about the magnets refer to the link;
https://brainly.com/question/19542022
A 75kg bicyclist (including the bicycle), initially at rest at the top of a hill, coasts down the hill, reaching a speed of 14.6m/s at the bottom of the hill. The distance and height of the hill are shown. Neglect any friction impeding the motion and the rotational energy of the wheels. List the energy types at the initial and final time and whether work and loss (due to non-conservative forces) occur as well as the corresponding amounts of energy.
The energy type at the initial time is potential energy and the energy at the final time or position is kinetic energy.
What is the law of conservation of energy?The law of conservation of energy states that energy can neither be created nor destroyed but can be transformed from one form to another.
Based on the law of conservation of mechanical energy, the formula for the change in the kinetic energy and the potential energy of the bicyclist is given as;
K.Ei + P.Ei = K.Ef + P.Ef
where;
K.Ei is the initial kinetic energy of the bicyclistK.Ef is the final kinetic energy of the bicyclistP.Ei is the initial potential energy of the bicyclistP.Ef is the final potential energy of the bicyclistThe kinetic energy of the bicyclist increases with increase in the velocity of the bicyclist while the potential energy increases with increase in the height of the bicyclist.
At the initial position when the bicyclist is at rest, the kinetic energy is zero, so the only energy at the initial position is potential energy because the height is maximum.
In addition, at the final position, the velocity of the bicyclist is maximum and the height is zero, so the only energy at the final position is kinetic energy.
Learn more about conservation of energy here: https://brainly.com/question/166559
#SPJ1
True or False? Will mark Brainlest
Answer:
False
Explanation:
They had no free oxygen though they has oceans forming and it was very hot and today is much different hope that helps!
What muscle movement do we use to close a joint.
Answer: Your using your skeletal muscle
Explanation:
WRITE A PARAGRAPH ABOUT PRESSURE
Answer:
pressure is a horrible thing to go through, it can lead to many bad side effects, like burn out and it can also lead to high blood pressure, head aches, heart problems, depression, anxiety, and many more damaging effects. Pressure can destroy someones mental health if not dealed worth properly
I hope this is okay! I'm not sure what pressure you meant
(HELP PLEASE)What are some reasons people produce synthetic materials?
Answer:
Explanation:
Synthetic fabrics, such as nylon and polyester, are produced entirely from chemicals. Natural fabrics, such as cotton, silk, and wool are made of fibres from plants and animals. Synthetic fabrics are useful because they have very different or enhanced (improved) properties in comparison to natural materials.
If the velocity of an object changed from 30 m/s to 60 m/s over a period of 10 seconds what would the average acceleration be ?
A pinball bangs against a bumper of a pinball machine with a speed of 0.46 m/s. If the ball has a mass of 0.058 kg, what is the ball's kinetic energy?
Answer:
either its 12 or 0.402
Explanation:
please help! i'll give brainliest.
what is it called when a magnet causes the atoms in a non-magnetic metal to line up and act like a magnet?
a: oriented magnet
b: permanent magnet
c: non-magnet
d: induced magnet
Answer:
I think It's induced magnet
Explanation:
Because a magnet and non magnet can be chicken nuggets
If a magnet causes the atoms in a non-magnetic metal to line up and act like a magnet, the non magnet is said to be an induced magnet by the magnetic induction by a permanent magnet.
What is magnetic induction ?A permanent magnet is made of ferromagnetic materials which are having permanent magnetic properties. The magnetic field lines from permanent magnet always align with an applied magnet.
As in the case of dipole molecules capable of inducing a polarity to a nonpolar molecule, a magnetic field by a strong magnet can induce a magnetic property to a nonmagnet.
The induced magnetic field only reside in the object as long as the induction source is there. For example the a rotating electric filed causes magnetic moment in a nonmagnet.
Find more on magnetic induction:
https://brainly.com/question/18575018
#SPJ5
how big is the universe?
sorry this is so random
Answer:
Explanation: 46 billion light years I think
Aww I wanted brainliest:( be doggo, doggo sad :(
what is it that makes a magnet different from a piece of iron that is not mangetic?
Answer:
Under normal conditions, a magnetic material like iron doesn't behave like a magnet because the domains don't have a preferred direction of alignment. On the other hand, the domains of a magnet (or a magnetized iron) are all aligned in s specific direction.
1 point
A leak in a swimming pool allows 2.50 liters to flow out every minute. How
many gallons leak out in week? (There are 0.946 liters per quart and 4
quarts per gallon.) *
O 910. gallons
O 12 700 gallons
0 7 140 gallons
6 660 gallons
Answer:
66.6 G
Explanation: