Answer the following, show all necessary solutions. 1. Use any method to solve for the unknowns (5 points): 2x-y-3z=0 -x+2y-3z=0 x + y + 4z = 0 2.

Given the following matrices, verify that (5 points each): 4 A = B = c=1} 1 5 D= -1 0 #8 1 E= 1 2 a. C(A+B)=CA + CB b. (DT)¹=D c. B=(B²)¹=(B₁¹)² d. (A¹)¹=(A¹) ¹ 3. Find matrix A given the following expression (5points) -3 7 (7A)-¹ = [¯ 1 4. Compute for p(A) if p(x)=x²-2x+1 when using the matrix A in number 2 (5 points).

The equilibrium price for Toyota vehicles in Oman during the Covid-19 endemic situation is approximately 705.88 OMR, and the equilibrium quantity is approximately 5217.65 vehicles. The choke price for Toyota vehicles in Oman is 2750 OMR, which is the price at which the quantity demanded becomes zero.

a. To determine the equilibrium price and quantity, we need to set the quantity demanded (Qd) equal to the quantity supplied (Qs) and solve for the price (p).

Qd = Qs

5500 - 2p/5 = 3p - 1300

To solve this equation, we can start by simplifying it:

Multiplying both sides by 5:

5500 - 2p = 15p - 6500

Adding 2p to both sides:

5500 = 17p - 6500

Adding 6500 to both sides:

12000 = 17p

Dividing both sides by 17:

p = 12000/17 ≈ 705.88

The equilibrium price is approximately 705.88 OMR.

To determine the equilibrium quantity, we substitute the equilibrium price into either the demand or supply equation:

Qd = 5500 - 2p/5

Qd = 5500 - 2(705.88)/5

Qd ≈ 5500 - 282.35

Qd ≈ 5217.65

The equilibrium quantity is approximately 5217.65 vehicles.

b. The choke price refers to the price at which the quantity demanded (Qd) becomes zero. To find the choke price, we set the quantity demanded (Qd) equal to zero and solve for the price (p).

Qd = 5500 - 2p/5

0 = 5500 - 2p/5

To solve this equation, we can start by simplifying it:

Multiplying both sides by 5:

0 = 5500 - 2p

Subtracting 5500 from both sides:

-5500 = -2p

Dividing both sides by -2 (and changing the sign):

p = 2750

The choke price for Toyota vehicles in Oman is 2750 OMR.

To know more about equilibrium price refer here:

https://brainly.com/question/32559048#

#SPJ11

The percentages are given as follows:

a) Between 66 and 71 inches: 73.33%.

b) 6 feet tall: 4.49%.

We first must use the z-score formula, as follows:

[tex]Z = \frac{X - \mu}{\sigma}[/tex]

In which:

The mean and the standard deviation for this problem are given as follows:

[tex]\mu = 68, \sigma = 2.5[/tex]

For item a, the probability is the p-value of Z when X = 71 subtracted by the p-value of Z when X = 66, hence:

Z = (72 - 68)/2.5

Z = 1.6

Z = 1.6 has a p-value of 0.9452.

Z = (66 - 68)/2.5

Z = -0.8

Z = -0.8 has a p-value of 0.2119.

0.9452 - 0.2119 = 0.7333 = 73.33%.

For item b, the probability is the p-value of Z when X = 72.5 subtracted by the p-value of Z when X = 71.5, as 6 feet = 72 inches, hence:

Z = (72.5 - 68)/2.5

Z = 1.8

Z = 1.8 has a p-value of 0.9641.

Z = (71.5 - 68)/2.5

Z = 1.4

Z = 1.4 has a p-value of 0.9192.

0.9641 - 0.9192 = 0.0449 = 4.49%.

More can be learned about the normal distribution at https://brainly.com/question/25800303

#SPJ4

In this problem, the quality control department of FinePrint wants to test whether the average number of pages printed by cartridges at the New facility is the same or higher than that at the Old facility.

To test the hypothesis, we will use the two-sample t-test for comparing means. The null hypothesis states that the average number of pages printed at the New facility is the same as that at the Old facility, while the alternative hypothesis states that it is higher. Since the variances are assumed to be equal, we can use the pooled variance estimate. We calculate the test statistic using the formula and then compare it with the critical value from the t-distribution table with the appropriate degrees of freedom. If the test statistic is greater than the critical value, we reject the null hypothesis. Otherwise, we fail to reject it.

To know more about hypothesis here: brainly.com/question/29576929

#SPJ11

To find the solution of the given system dx/dy = -4x + 2y and dy/dt = 2x - 4y using the eigenvalue method, we first need to find the eigenvalues and eigenvectors of the coefficient matrix. The general solution of the given system can be expressed as x = c1e^(-6t)v1 + c2e^(-2t)v2

The coefficient matrix of the system is A = [[-4, 2], [2, -4]]. To find the eigenvalues λ, we solve the characteristic equation det(A - λI) = 0, where I is the identity matrix. By substituting the values of A, we get the characteristic equation (-4 - λ)(-4 - λ) - (2)(2) = 0. Simplifying this equation, we obtain λ^2 + 8λ + 12 = 0. Factoring this quadratic equation, we get (λ + 6)(λ + 2) = 0. Thus, the eigenvalues are λ = -6 and λ = -2.

Next, we find the corresponding eigenvectors by solving the system (A - λI)v = 0, where v is the eigenvector and I is the identity matrix. For λ = -6, we have the equation [-10, 2; 2, -2]v = 0. Solving this system, we find the eigenvector v1 = [1, 1].

For λ = -2, we have the equation [-2, 2; 2, -2]v = 0. Solving this system, we find the eigenvector v2 = [1, -1].

The general solution of the given system can be expressed as x = c1e^(-6t)v1 + c2e^(-2t)v2, where c1 and c2 are constants, e is the base of the natural logarithm, and t is the independent variable. This represents a linear combination of the two eigenvectors, scaled by the corresponding eigenvalues and exponential terms.

Learn more about eigenvalue method here: brainly.com/question/31650198

#SPJ11

(a) Using the method of maximum likelihood, the parameter of the distribution is estimated to λ = 0.042. To obtain this estimate, we first write the likelihood function L(λ) as the product of the individual probabilities of the observed sample data. For an exponentially distributed random variable, the likelihood function is:

L(λ) = λ^n * exp(-λΣxi)

where n is the sample size and xi is the ith observed value. Taking the derivative of this function with respect to λ and setting it equal to zero, we obtain the maximum likelihood estimate for λ:

λ = n/Σxi

Substituting n = 5 and Σxi = 109, we get λ = 0.045. Therefore, the parameter of this distribution is estimated to λ = 0.042.

(b) Let L be the estimator for the parameter of this distribution obtained by the method of moments, and let M be the estimator for the parameter of this distribution obtained by the method of maximum likelihood. In this situation, we have L < M. This is because the method of maximum likelihood generally produces more efficient estimators than the method of moments, meaning that the maximum likelihood estimator is likely to have a smaller variance than the method of moments estimator. In other words, the maximum likelihood estimator is expected to be closer to the true parameter value than the method of moments estimator.

To know more about likelihood function visit:

https://brainly.com/question/29646733

#SPJ11

To construct a 99% confidence interval for the true population mean textbook weight, we use the sample mean, the population standard deviation, and the critical value from the standard normal distribution. The confidence interval provides a range of values within which we can be 99% confident that the true population mean lies.

Given that the sample mean weight is 54 ounces, the population standard deviation is 14.5 ounces, and we want a 99% confidence interval, we can use the formula:Confidence Interval = sample mean ± (critical value) * (population standard deviation / √sample size)The critical value corresponding to a 99% confidence level is approximately 2.58, which can be obtained from the standard normal distribution table.

Substituting the values into the formula, we have:Confidence Interval = 54 ± (2.58) * (14.5 / √48)Calculating the expression yields the confidence interval for the true population mean textbook weight. The result will be a range of values with decimal places, rounded to two decimal places, representing the lower and upper bounds of the interval.

learn more about decimals here:brainly.com/question/30958821

#SPJ11

The fourth-order Taylor Series approximation of y = cos x + sin x at x = 0.1 is approximately 1.0941625, and the percent relative error is approximately 0.06185%.

To find the fourth-order Taylor Series approximation of a function y = f(x) at x = xo, we need the function value and its derivatives up to the fourth order at xo. In this case, we have:

f(x) = cos x + sin x

To compute the Taylor Series approximation at x = 0.1 (xo = 0), we need to evaluate the function and its derivatives at xo = 0:

f(0) = cos 0 + sin 0 = 1 + 0 = 1

f'(0) = -sin 0 + cos 0 = 0 + 1 = 1

f''(0) = -cos 0 - sin 0 = -1 - 0 = -1

f'''(0) = sin 0 - cos 0 = 0 - 1 = -1

f''''(0) = cos 0 + sin 0 = 1 + 0 = 1

The fourth-order Taylor Series approximation of y = cos x + sin x at x = 0.1 is given by:

y ≈ f(0) + f'(0)x + (f''(0)/2!)x² + (f'''(0)/3!)x³ + (f''''(0)/4!)x⁴

Substituting the values we obtained earlier, we have:

y ≈ 1 + 1(0.1) + (-1/2!)(0.1)² + (-1/3!)(0.1)³ + (1/4!)(0.1)⁴

y ≈ 1 + 0.1 - 0.005 + 0.000166667 - 0.00000416667

y ≈ 1.0941625

To compute the percent relative error, we need the exact value of y at x = 0.1. Evaluating y = cos x + sin x at x = 0.1:

y = cos(0.1) + sin(0.1) ≈ 0.995004 + 0.0998334 ≈ 1.0948374

The percent relative error is given by:

Percent Relative Error = (|Approximate Value - Exact Value| / |Exact Value|) * 100

Percent Relative Error = (|1.0941625 - 1.0948374| / |1.0948374|) * 100

Percent Relative Error ≈ 0.06185%

Learn more about Taylor Series here:

https://brainly.com/question/28168045

#SPJ11

The solution to the inequality ||8-3p|| ≥ 2 is:p ≤ 2 or p ≥ 10/3. To solve the inequality ||8-3p|| ≥ 2, you'll first want to isolate the absolute value expression.

Once you've done that, you'll be left with two inequalities to solve. How to solve the inequality ||8-3p|| ≥ 2?The first inequality is 8-3p ≥ 2.

To solve for p, you can start by subtracting 8 from both sides to get:-3p ≥ -6.

Then divide both sides by -3 to get:p ≤ 2. The second inequality is -(8-3p) ≥ 2. To solve for p, you can start by distributing the negative sign to get:-8 + 3p ≥ 2.

Then add 8 to both sides to get:3p ≥ 10. Finally, divide both sides by 3 to get:p ≥ 10/3. So the solution to the inequality ||8-3p|| ≥ 2 is:p ≤ 2 or p ≥ 10/3.

For more question on inequality

https://brainly.com/question/30238989

#SPJ8

The expression can be factored as (3√(54x³ ) - 2)(486x²  + 162√(54x³   ) + 4).

To factor the expression 54x^3 - 16^3, we can use the difference of cubes formula, which states that a^3 - b^3 = (a - b)(a^2 + ab + b^2).

In this case, a is 54x^3 and b is 16. Applying the formula, we have:

54x^3 - 16^3 = (54x^3 - 16)(54x^3 + 16(54x^3) + 16^2)

Now we can simplify each factor:

54x^3 - 16 = (3√(54x^3))^3 - 2^3 = (3√(54x^3) - 2)((3√(54x^3))^2 + (3√(54x^3))2 + 2^2)

Simplifying further:

54x^3 - 16 = (3√(54x^3) - 2)(9(54x^3) + 6√(54x^3) + 4)

Finally, we can simplify the expression inside the square brackets:

54x^3 - 16 = (3√(54x^3) - 2)(486x^2 + 162√(54x^3) + 4)

Therefore, the expression 54x^3 - 16 can be completely factored as (3√(54x^3) - 2)(486x^2 + 162√(54x^3) + 4).

Learn more about expression

brainly.com/question/28170201

#SPJ11

Yes, the statement is true. Every (n + 1)-element subset of {1, . . . , 2n} contains two consecutive integers.

The pigeonhole principle states that if you distribute n + 1 objects into n pigeonholes, then at least one pigeonhole must contain more than one object.

In this case, we have a set {1, . . . , 2n} with 2n elements. We want to select an (n + 1)-element subset from this set.

Consider the elements in the subset. Each element can be seen as a pigeon, and the pigeonholes are the integers from 1 to n. Since we have n pigeonholes and n + 1 pigeons (elements in the subset), by the pigeonhole principle, there must be at least one pigeonhole (integer) that contains more than one pigeon (consecutive elements).

To visualize this, let's assume that we select the first n + 1 elements from the set. In this case, we have n pigeonholes (integers from 1 to n), and n + 1 pigeons (elements in the subset). By the pigeonhole principle, at least one pigeonhole must contain more than one pigeon, which means that there exist two consecutive integers in the subset.

This argument holds true for any (n + 1)-element subset of {1, . . . , 2n}, as the pigeonhole principle guarantees that there will always be two consecutive integers in the subset.

Learn more about integers

brainly.com/question/490943

#SPJ11

The probability that a one-page letter contains at least 3 mistakes is approximately 0.102. The probability that a three-page letter contains exactly 2 mistakes is approximately 0.232.

To find the probability that a one-page letter contains at least 3 mistakes, we can use the Poisson distribution formula. The average rate of mistakes per page is given as 1.65. Let's denote the random variable X as the number of mistakes made in a one-page letter. The formula for the Poisson distribution is P(X = k) = (e^(-λ) * λ^k) / k!, where λ represents the average rate. We want to find P(X ≥ 3), which is equivalent to 1 - P(X < 3) or 1 - P(X = 0) - P(X = 1) - P(X = 2). Plugging in the values into the formula, we get P(X ≥ 3) ≈ 1 - (e^(-1.65) * 1.65^0 / 0!) - (e^(-1.65) * 1.65^1 / 1!) - (e^(-1.65) * 1.65^2 / 2!). Calculating this expression gives us approximately 0.102.

To find the probability that a three-page letter contains exactly 2 mistakes, we can again use the Poisson distribution formula. Since the average rate of mistakes per page is still 1.65, the average rate for a three-page letter would be 1.65 * 3 = 4.95. Let's denote the random variable Y as the number of mistakes made in a three-page letter. We want to find P(Y = 2). Using the Poisson distribution formula, we get P(Y = 2) = (e^(-4.95) * 4.95^2) / 2!. Plugging in the values and calculating this expression gives us approximately 0.232.

To learn more about probability click here: brainly.com/question/31828911

#SPJ11

(a) P(x) = (x - 3)² - 16

(b) The vertex of the parabola is (3, -16).

(c) The graph of the function is a downward-opening parabola with vertex (3, -16).

To write the given quadratic function in the form P(x) = a(x - h)² + k, we need to complete the square.

Move the constant term to the other side of the equation:

[tex]x^{2} - 6x = 7[/tex]

Complete the square by adding the square of half the coefficient of x to both sides:

[tex]x^{2} - 6x + (-6/2)^{2} = 7 + (-6/2)^{2} \\x^{2} - 6x + 9 = 7 + 9\\x^{2} - 6x + 9 = 16[/tex]

Rewrite the left side as a perfect square:

[tex](x - 3)^2 = 16[/tex]

Comparing this with the desired form P(x) = a(x - h)² + k, we can see that a = 1, h = 3, and k = 16. Therefore, the function can be written as P(x) = (x - 3)² - 16.

The vertex of a parabola in the form P(x) = a(x - h)² + k is located at the point (h, k). In this case, the vertex is (3, -16).

To graph the function, we plot the vertex at (3, -16) and then choose a few additional points on either side of the vertex. By substituting x-values into the equation and evaluating the corresponding y-values, we can plot these points on a graph. Since the coefficient of x² is positive (1), the parabola opens downward.

Learn more about function

brainly.com/question/31062578

#SPJ11

To solve the given differential equation (x²D² - 2xD - 4)y = 32(log x)² using the method of variation of parameters, we need to assume a general solution in terms of unknown parameters.

The given differential equation can be written as:

x²y'' - 2xy' - 4y = 32(log x)²

To find the general solution, we assume y = u(x)v(x), where u(x) and v(x) are unknown functions. We differentiate y with respect to x to find y' and y'', and substitute these derivatives into the original equation.

After simplifying, we get:

x²(u''v + 2u'v' + uv'') - 2x(u'v + uv') - 4uv = 32(log x)²

We equate the coefficient of each term on both sides of the equation. This leads to a system of equations involving u, v, u', and v'. Solving this system will give us the values of u(x) and v(x).

Next, we integrate u(x)v(x) to obtain the general solution y(x). This general solution will include arbitrary constants that we can determine using initial conditions or boundary conditions if provided.

By following the method of variation of parameters, we can find the particular solution to the given differential equation and have a complete solution that satisfies the equation.

Learn more about coefficient here:

https://brainly.com/question/13431100

#SPJ11

To convert from the left-hand side (LHS) expression 0.2 + 2.2 cos60° + j₂.2 sin 60° to the right-hand side (RHS) expression 2.307/55.7°, we use the concept of complex numbers and polar form representation.

The given LHS expression consists of a real part, 0.2, and an imaginary part involving cosine and sine functions. To convert this to the RHS expression, we need to express the complex number in polar form, which consists of a magnitude and an angle. Using the trigonometric identity cos(60°) = 1/2 and sin(60°) = √3/2, we can simplify the LHS expression as follows: 0.2 + 2.2(1/2) + j₂.2(√3/2). This simplifies to 0.2 + 1.1 + j₁.1√3.

To obtain the polar form, we calculate the magnitude (r) and angle (θ) using the formulas r = √(real² + imaginary²) and θ =arctan(imaginary/real). In this case, r = √(1.1² + (1.1√3)²) = 2.307 and θ = arctan((1.1√3)/1.1) = 55.7°

Thus, the converted form of the LHS expression is 2.307/55.7°, representing a complex number with magnitude 2.307 and an angle of 55.7 degrees.

Learn more about right hand side click here: brainly.com/question/2947917

#SPJ11

By setting up the integral to calculate the surface area, we can evaluate it using appropriate limits and integration techniques.

The portion P is defined by the conditions x ≥ 0, y ≥ 0, z ≥ 0, and z ≤ √(x² + y²). We need to find the surface area of this portion.

The surface area of a portion of a surface is given by the formula:

S = ∫∫√(1 + (dz/dx)² + (dz/dy)²) dA,

where dA represents the differential area element.

In this case, the given surface is the sphere x² + y² + z² = 1, and the cone is defined by z = √(x² + y²). We can rewrite the cone equation as z² = x² + y² to simplify the calculation.

By substituting z² = x² + y² into the surface area formula, we can simplify the expression inside the square root. Then, we set up the double integral over the region that represents the portion P in the first octant. The limits of integration will depend on the shape of the portion.

Once the integral is set up, we can evaluate it using appropriate integration techniques, such as switching to polar coordinates if necessary. This will give us the surface area of the portion P of the sphere.

Since the calculation involves integration and evaluating limits specific to the region P, the exact numerical value of the surface area cannot be provided without further details or calculations.

Learn more about area here:

https://brainly.com/question/1631786

#SPJ11

(a) The statements (z ∈ A → x ∈ B) and (x ∈ Bº → x ∈ Aº) are logically related as contrapositives.

(b) ACB is true if and only if Bc ⊆ Aº.

(a) The statements (z ∈ A → x ∈ B) and (x ∈ Bº → x ∈ Aº) are logically related as contrapositives of each other. The contrapositive of a statement is formed by negating both the hypothesis and the conclusion and reversing their order. In this case, the contrapositive of (z ∈ A → x ∈ B) is (x ∉ B → z ∉ A). Since the contrapositive of a true statement is also true, we can conclude that if (x ∈ Bº → x ∈ Aº) is true, then (z ∈ A → x ∈ B) is also true.

(b) To prove ACB if and only if Bc ⊆ Aº, we need to show that both implications hold:

ACB implies Bc ⊆ Aº:

If ACB is true, it means that every element in A is also in B. Therefore, if x is not in B (x ∈ Bc), then it cannot be in A (x ∉ A). This implies that Bc is a subset of Aº (Bc ⊆ Aº).

Bc ⊆ Aº implies ACB:

If Bc ⊆ Aº is true, it means that every element not in B is in Aº. So, if an element z is in A, it is not in Aº (z ∉ Aº). Therefore, z must be in B (z ∈ B) because if it were not in B, it would be in Aº. Hence, every element in A is also in B, leading to ACB.

By proving both implications, we can conclude that ACB if and only if Bc ⊆ Aº.

To learn more about contrapositives visit : https://brainly.com/question/11073037

#SPJ11

option A is the correct answer. 4. Given that the complex number is v/3-i. We can use the following formula to convert it into Trigonometric form:r = √(v/3)^2 + (-1)^2r = √(4/3)r = 2√(1/3)Now, to find θ we use the following formula:θ = tan^(-1)⁡(b/a)θ = tan^(-1)⁡(-1/√(1/3))θ = -30°Therefore, the complex number v/3-i in Trigonometric form is 2 cis (-30°). Hence, option A is the correct answer.8. The given hyperbola is 25x² - 16y² = 400.

To find the foci of a hyperbola, we use the following formula:c = √(a² + b²)where a and b are the lengths of the semi-major and semi-minor axes. The standard form of the hyperbola is given by:((x - h)² / a²) - ((y - k)² / b²) = 1Comparing the given hyperbola with the standard form we get:25x² / 400 - 16y² / 400 = 1We can simplify this equation by dividing both sides by 400:x² / 16 - y² / 25 = 1

Therefore, the lengths of the semi-major and semi-minor axes are a = 5 and b = 4 respectively. We can now substitute these values in the formula for c:c = √(a² + b²)c = √(25 + 16)c = √41Therefore, the foci of the hyperbola are (± √41, 0). Hence, option A is the correct answer.

To know more about Trigonometric visit:-

https://brainly.com/question/29156330

#SPJ11

The experiment aimed to measure the coefficients of restitution of 15 randomly selected drivers produced by a specific club maker to determine if there is evidence to support a claim that the mean coefficient of restitution exceeds 0.82. The coefficients of restitution obtained ranged from 0.7983 to 0.8750.

The coefficients of restitution (COR) of 15 drivers produced by a particular club maker were measured to investigate if there is evidence to suggest that the mean COR exceeds 0.82. The COR is a measure of the spring-like effect that the thin face of the club imparts to the ball, resulting in longer tee shots. To conduct the experiment, golf balls were fired from an air cannon, allowing precise control over the incoming velocity and spin rate.

The observed coefficients of restitution for the 15 drivers were as follows: 0.8411, 0.8191, 0.8182, 0.8125, 0.8750, 0.8580, 0.8532, 0.8483, 0.8276, 0.7983, 0.8042, 0.8730, 0.8282, 0.8359, and 0.8660. These values provide the basis for analyzing whether the mean COR is greater than 0.82.

To determine if there is evidence to support the claim that the mean COR exceeds 0.82, a statistical test can be performed. Given the sample data and a significance level (α) of 0.05, a one-sample t-test can be conducted. The null hypothesis (H₀) assumes that the mean COR is equal to or less than 0.82, while the alternative hypothesis (H₁) suggests that the mean COR is greater than 0.82.

Performing the appropriate calculations using the sample data, if the resulting p-value is less than the significance level (α = 0.05), we can reject the null hypothesis and conclude that there is evidence to support the claim that the mean COR exceeds 0.82. However, if the p-value is greater than α, we fail to reject the null hypothesis and do not have sufficient evidence to conclude that the mean COR is greater than 0.82.

To learn more about coefficients click here: brainly.com/question/31972343

#SPJ11

The coordinate vector of w relative to the basis S = {(4,-3), (2,6)} for R² is (6/33, -2/33).Thus, the answer to the given problem is:[tex][w]s[/tex] = (6/33, -2/33).

To find the coordinate vector of w relative to the basis S = {u₁, u₂} for R², use the following formula:[tex][w]s[/tex]= [tex]([w]b)[/tex] . (B₂)⁻¹

where B is the matrix of the given basis (S), and [tex][w]b[/tex] is the coordinate vector of w relative to the standard basis.

The first step is to find the inverse of matrix B₂. Here are the steps to find the inverse of matrix B₂:

B₂ = [u₁ u₂]

= ⎡⎣4 2 -3 6⎤⎦ Invertible if det(B₂) ≠ 0

⎡⎣4 2 -3 6⎤⎦ → det(B₂)

= (4)(6) - (2)(-3)

= 33

≠ 0.

Therefore, B₂ is invertible. The inverse of matrix B₂ is given by: B₂⁻¹ = 1/33 ⎡⎣6  -2  3  4⎤⎦

Now, let's find the coordinate vector of w relative to the standard basis. We know that w = (1,1) and the standard basis is

B₁ = {(1,0), (0,1)}.

Therefore,[tex][w]b[/tex] = [1 1]T.

The coordinate vector of w relative to the basis S is then:

[w]s = [tex]([w]b)[/tex].

(B₂)⁻¹[tex][w]s[/tex] = ⎡⎣1 1⎤⎦ . 1/33 ⎡⎣6  -2  3  4⎤⎦

= 1/33 ⎡⎣6  -2⎤⎦

= (6/33, -2/33).

Therefore, the coordinate vector of w relative to the basis S = {(4,-3), (2,6)} for R² is (6/33, -2/33).

Thus, the answer to the given problem is:[tex][w]s[/tex] = (6/33, -2/33).

To know more about coordinate vector, refer

https://brainly.com/question/31427002

#SPJ11

the value of δh for the given reaction is -akjzx² - 2xz - 2x³y² + 3y² - 2x²y³.

The given reactions are:2x²y³ → 4x³y²    (1)

δh = akjzx² → 2xz      (2)

δh = bkj                    (3)

The given reaction is:2x²y³ + 2z → 3y² + 2zx²

We are to find δh for the given reaction using the given reactions.

Let us add reactions (1) and (2) as follows: 2x²y³ → 4x³y²ΔH₁+δh = akjzx² → 2xz  ΔH₂

2x²y³ + δh = 4x³y² + 2xzΔH₃ (adding equations (1) and (2))

Let us multiply equation (1) by (-1) and add to equation (3)

2x²y³ → -4x³y²ΔH₁ + δh = -akjzx² → -2xzΔH₂

2x³y² + δh = -akjzx² - 2xzΔH₄ (multiplying equation (1) by (-1) and adding to equation (3))

We are to find δh for the given reaction:2x²y³ + 2z → 3y² + 2zx²

We have: δh = -akjzx² - 2xz - 2x³y² + 3y² - 2x²y³

Expanding the terms, we get:δh = -akjzx² - 2xz - 2x³y² + 3y² - 2x²y³

Know more about the reaction

https://brainly.com/question/21491586

#SPJ11

As per the given data, r'(t) · r''(t) = [tex]108e^{(2t)} - 72e^{(-2t)} + 72te^{(2t)[/tex].

To discover t(zero), we want to alternative 0 for t inside the given feature r(t). This offers us:

[tex]r(0) = 3e^{(2(0)}), 3e^{(-2(0)}), 3(0)e^{(2(0)})\\\\= 3e^0, 3e^0, 0\\\\= 3(1), 3(1), 0\\\\= 3, 3, 0[/tex]

Therefore, t(0) = (3, 3, 0).

To find r''(0), we need to locate the second one derivative of the given feature r(t). Taking the by-product two times, we get:

[tex]r''(t) = (3e^{(2t)})'', (3e^{(-2t)})'', (3te^{(2t)})''= 12e^{(2t)}, 12e^{(-2t)}, 12te^{(2t)} + 12e^{(2t)}[/tex]

Substituting 0 for t in r''(t), we have:

[tex]r''(0) = 12e^{(2(0)}), 12e^{(-2(0)}), 12(0)e^{(2(0)}) + 12e^{(2(0)})\\\\= 12e^0, 12e^0, 12(0)e^0 + 12e^0\\\\= 12(1), 12(1), 0 + 12(1)\\\\= 12, 12, 12[/tex]

Therefore, r''(0) = (12, 12, 12).

Finally, to discover r'(t) · r''(t), we need to calculate the dot made of the first derivative of r(t) and the second spinoff r''(t). The first spinoff of r(t) is given by using:

[tex]r'(t) = (3e^{(2t)})', (3e^{(-2t)})', (3te^{(2t)})'\\\\= 6e^{(2t)}, -6e^{(-2t)}, 3e^{(2t)} + 6te^{(2t)[/tex]

[tex]r'(t) · r''(t) = (6e^{(2t)}, -6e^{(-2t)}, 3e^{(2t)} + 6te^{(2t)}) · (12, 12, 12)\\\\= 6e^{(2t)} * 12 + (-6e^{(-2t)}) * 12 + (3e^{(2t)} + 6te^{(2t)}) * 12\\\\= 72e^{(2t)} - 72e^{(-2t)} + 36e^{(2t)} + 72te^{(2t)[/tex]

Thus, r'(t) · r''(t) = [tex]108e^{(2t)} - 72e^{(-2t)} + 72te^{(2t)[/tex].

For more details regarding derivative, visit:

https://brainly.com/question/29144258

#SPJ1

It is give that A = [0 0 -2 1 2 1 1 0 3].a) To find A³ using the matrix similarity with a diagonal matrix D and the formula for the power of the diagonal matrices.

To find the diagonal matrix, D, and the invertible matrix, P, such that A = PDP−1, where D is diagonal and P is invertible. The characteristic polynomial of A is p(λ) = det(A − λI) = λ³ − λ² − 2λ − 2 = (λ + 1)(λ² − 2λ − 2). From this, the eigenvalues of A are −1, 1 + √3, and 1 − √3. We compute the eigenvectors for each eigenvalue:For λ = −1, we need to solve (A + I)x = 0, where I is the 3 × 3 identity matrix. This gives (A + I) = [1 0 -2 1 3 1 1 0 4]. We use row operations to put this matrix into row echelon form:Next, we solve the system using the back-substitution method to get x₃ = 1 and x₁ = x₂ = 0. Hence, an eigenvector corresponding to λ = −1 is x₁ = [0 0 1]T. For λ = 1 + √3, we need to solve (A − (1 + √3)I)x = 0. This gives (A − (1 + √3)I) = [−(1 + √3) 0 −2 1 −(1 − √3) 1 1 0 2 + √3]. We use row operations to put this matrix into row echelon form:Next, we solve the system using the back-substitution method to get x₃ = 1 and x₁ = (2 + √3)x₂. Hence, an eigenvector corresponding to λ = 1 + √3 is x₂ = [2 + √3 1 0]T. For λ = 1 − √3, we need to solve (A − (1 − √3)I)x = 0. This gives (A − (1 − √3)I) = [−(1 − √3) 0 −2 1 −(1 + √3) 1 1 0 2 − √3]. We use row operations to put this matrix into row echelon form:Next, we solve the system using the back-substitution method to get x₃ = 1 and x₁ = (2 − √3)x₂. Hence, an eigenvector corresponding to λ = 1 − √3 is x₃ = [2 − √3 1 0]T. We now construct the matrix P whose columns are the eigenvectors of A, normalized to have length 1, in the order corresponding to the eigenvalues of A. Thus, we haveThen, we compute P⁻¹ = [−(1/2) 1/√3 1/2 0 −2/√3 1/3 1/2 1/√3 1/2]. Finally, we compute D = P⁻¹AP. Using the formula for the power of diagonal matrices, we getFinally, we use the formula A³ = PD³P⁻¹ to get A³ = [10 10 -2 17 -4 -7 14 10 13].b) To find any matrix B that is similar to the matrix A, other than the diagonal matrix in part a. Let B = PJP⁻¹, where P is the matrix from part a and J is any matrix that is similar to the matrix D in part a. For example, let J = [1 0 0 0 1 0 0 0 −1]. Then, J³ = [1 0 0 0 1 0 0 0 −1]³ = [1 0 0 0 1 0 0 0 −1] = [1 0 0 0 1 0 0 0 −1]. Thus, we have B³ = P(J³)P⁻¹ = PDP⁻¹ = A. Therefore, B is a matrix that is similar to A but is not diagonal.Therefore A³ = [10 10 -2 17 -4 -7 14 10 13], and a matrix B that is similar to A but is not diagonal is B = PJP⁻¹, where P is the matrix from part a and J is any matrix that is similar to the matrix D in part a.

to know more about diagonal Matrix visit:

brainly.com/question/30504747

#SPJ11

The matrix A³ using the matrix similarity with a diagonal matrix D is [ 2 0 0 0 50+30√6 0 0 0 50-30√6] / 18. The matrix B is similar to matrix A, other than the diagonal matrix in part a, given by B = [0 -1 0 -2 -1 1 -1 1 1].

a)Given, A = [0 0 -2 1 2 1 1 0 3] Find A³ using the matrix similarity with a diagonal matrix D and the formula for the power of the diagonal matrices. To find the matrix A³ using matrix similarity with diagonal matrix D, first, we need to diagonalize the given matrix A. Therefore, let’s find the eigenvectors and eigenvalues of matrix A. The characteristic equation of matrix A is given by |A-λI| = 0.

Here, λ represents the eigenvalues of matrix A. Substituting matrix A in the characteristic equation, we get |A-λI| = |0 0 -2 1 2 1 1 0 3-λ| = 0. Expanding the determinant along the first column, we get0(2-3λ) - 0(1-λ) + (-2-λ)(1)(1) - 1(2-λ)(1) + 2(1)(1-λ) + 1(0-2) = 0

Simplifying the above equation, we getλ³ - λ² - 7λ - 5 = 0 Using synthetic division, we can writeλ³ - λ² - 7λ - 5 = (λ+1) (λ² - 2λ - 5) = 0. Solving the quadratic equation λ² - 2λ - 5 = 0, we getλ = 1±√6. Similarly, λ₁= -1, λ₂= 1+√6 and λ₃= 1-√6. Now, let’s find the eigenvectors corresponding to the eigenvalues. Substituting the eigenvalue λ₁= -1 in (A-λI)X = 0, we get(A-λ₁I)X₁ = 0(A+I)X₁ = 0

Solving the above equation, we get the eigenvector as X₁= [-1, -1, 1]T. Now, substituting the eigenvalue λ₂= 1+√6 in (A-λI)X = 0, we get(A-λ₂I)X₂ = 0⇒ [-1-1-2-λ₂ 1-λ₂2 1-λ₂ 0 3-λ₂]X₂ = 0⇒ [ -3-√6 - √6 2 1-√6 0 3-√6 ]X₂ = 0 Using Gaussian elimination, we getX₂= [-2-√6, -1, 1]T Now, substituting the eigenvalue λ₃= 1-√6 in (A-λI)X = 0, we get(A-λ₃I)X₃ = 0⇒ [-1-1-2-λ₃ 1-λ₃2 1-λ₃ 0 3-λ₃]X₃ = 0⇒ [ -3+√6 - √6 2 1+√6 0 3+√6 ]X₃ = 0.

Using Gaussian elimination, we get X₃= [-2+√6, -1, 1]T Now, the matrix P = [X₁, X₂, X₃] is the matrix of eigenvectors of matrix A, and D is the diagonal matrix containing the eigenvalues.⇒ P = [ -1 -2-√6 -2+√6-1 -1 1 1 1]⇒ D = [ -1 0 0 0 1+√6 0 0 0 1-√6 ] Now, we can find A³ using the formula, A³ = PD³P⁻¹ Where D³ is the diagonal matrix containing the cube of the diagonal entries of D.⇒ D³ = [ -1³ 0 0 0 (1+√6)³ 0 0 0 (1-√6)³]⇒ D³ = [ -1 0 0 0 25+15√6 0 0 0 25-15√6 ] Using the matrix P and D³, we can find A³ as follows. A³ = PD³P⁻¹= [ -1 -2-√6 -2+√6 -1 -1 1 1 1][ -1 0 0 0 25+15√6 0 0 0 25-15√6][1/18 1/9 1/9 -1/18 2-√6/18 2+√6/18 1/6 -1/3 1/6]= [ 2 0 0 0 50+30√6 0 0 0 50-30√6] / 18

b) Given, A = [0 0 -2 1 2 1 1 0 3] To find any matrix B that is similar to matrix A, other than the diagonal matrix in part a. We can use the Jordan Canonical Form (JCF). Using the JCF, we can write matrix A in the form of A = PJP⁻¹Here, J is the Jordan matrix and P is the matrix of eigenvectors of A and P⁻¹ is its inverse.

Let’s first find the Jordan matrix J. To find J, we need to find the Jordan basis of matrix A. The Jordan basis is found by finding the eigenvectors of A and its generalized eigenvectors of order 2 or more. The generalized eigenvectors are obtained by solving the equation (A-λI)X = V, where V is the eigenvector of A corresponding to λ.λ₁= -1 is the only eigenvalue of A and the eigenvector corresponding to λ₁= -1 is X₁= [-1, -1, 1]T.

Now, let’s find the generalized eigenvectors for λ₁.⇒ (A-λ₁I)X₂ = V⇒ (A+I)X₂ = V Where V is the eigenvector X₁= [-1, -1, 1]T⇒ [ -1-1-2 1-1 2 1-1 0 3-1 ]X₂ = [1, 1, -1]T⇒ [ -3 0 1 0 -1 0 2 0 2 ]X₂ = [1, 1, -1]TBy solving the above equation, we get the generalized eigenvector of order 2 for λ₁ as X₃= [1, 0, -1]T. Now, the matrix P = [X₁, X₂, X₃] is the matrix of eigenvectors and generalized eigenvectors of matrix A. Let’s write P = [X₁, X₂, X₃] = [ -1 -1 1 1 1 0 -1 1 -1].

Now, the Jordan matrix J can be found as J = [J₁ 0 0 0 J₂ 0 0 0 J₃]Here, J₁ = λ₁ = -1J₂ = [λ₁ 1] = [ -1 1 0 -1]J₃ = λ₁ = -1 Now, the matrix B that is similar to A can be found as B = PJP⁻¹= [ -1 -1 1 1 1 0 -1 1 -1] [ -1 1 0 -1 0 0 0 0 -1] [1/3 -1/3 1/3 1/3 1/3 1/3 1/3 -1/3 -1/3]= [ 0 -1 0 -2 -1 1 -1 1 1].

Conclusion: The matrix A³ using the matrix similarity with a diagonal matrix D is [ 2 0 0 0 50+30√6 0 0 0 50-30√6] / 18. Therefore, the matrix B that is similar to matrix A, other than the diagonal matrix in part a, is given by B = [0 -1 0 -2 -1 1 -1 1 1].

To learn more about matrix similarity visit:

brainly.com/question/31422410

#SPJ11

The volume of the solid bounded by the surfaces z = √(x^2+y^2)/3 and x^2+y^2+z^2 = 4 is (π/9) times the square of the radius, or (π/9) r^2.

To calculate the volume of the solid bounded by the surfaces z = √(x^2+y^2)/3 and x^2+y^2+z^2 = 4, we can use a triple integral in cylindrical coordinates.

First, let's convert the given equations to cylindrical coordinates:

1. z = √(x^2+y^2)/3 becomes z = √(r^2)/3 = r/3.

2. x^2 + y^2 + z^2 = 4 becomes r^2 + z^2 = 4.

Now, we can set up the triple integral to find the volume:

V = ∫∫∫ dV

The limits of integration in cylindrical coordinates are:

ρ: 0 to 2 (from the equation r^2 + z^2 = 4, we know that ρ^2 = r^2 + z^2)

φ: 0 to 2π (complete azimuthal rotation)

z: 0 to r/3 (from the equation z = r/3)

The integral is then:

V = ∫(from 0 to 2π) ∫(from 0 to 2) ∫(from 0 to r/3) ρ dρ dz dφ

Integrating with respect to ρ first, we get:

V = ∫(from 0 to 2π) ∫(from 0 to 2) [(1/2)ρ^2] (r/3) dz dφ

Next, integrating with respect to z:

V = ∫(from 0 to 2π) [(1/2) (r/3) (z) (from 0 to r/3)] dφ

  = ∫(from 0 to 2π) [(1/2) (r/3) (r/3)] dφ

  = ∫(from 0 to 2π) [(r^2/18)] dφ

Finally, integrating with respect to φ:

V = [(r^2/18) φ] (from 0 to 2π)

  = (r^2/18) (2π - 0)

  = (2π/18) r^2

  = (π/9) r^2

Therefore, the volume of the solid bounded by the surfaces z = √(x^2+y^2)/3 and x^2+y^2+z^2 = 4 is (π/9) times the square of the radius, or (π/9) r^2.

To learn more about volume click here:

/brainly.com/question/32235345

#SPJ11

The problem involves finding the radius of convergence and interval of convergence for three given series. The series are given by (a) Σ(n=1 to ∞) (3x - 2)^n/n, (b) Σ(n=0 to ∞) (3^n * x^n)/n!, and (c) Σ(n=1 to ∞) ((3 · 5 · 7 · ... · (2n + 1))/(n^2 · 2^n))x^(n+1).

To find the radius of convergence and interval of convergence for a power series, we use the ratio test. The ratio test states that for a series Σaₙxⁿ, the series converges if the limit of |aₙ₊₁/aₙ| as n approaches infinity is less than 1.

For series (a), applying the ratio test gives us |(3x - 2)/(1)| < 1, which simplifies to |3x - 2| < 1. Therefore, the radius of convergence is 1/3, and the interval of convergence is (-1/3, 1/3).

For series (b), applying the ratio test gives us |3x/n| < 1, which implies |x| < n/3. Since the factorial grows faster than the exponent, the series converges for all values of x. Hence, the radius of convergence is ∞, and the interval of convergence is (-∞, ∞).

For series (c), applying the ratio test gives us |(3 · 5 · 7 · ... · (2n + 1))/(n^2 · 2^n) * x| < 1. Simplifying the expression gives |x| < 2. Therefore, the radius of convergence is 2, and the interval of convergence is (-2, 2).

To learn more about interval of convergence, click here:

brainly.com/question/31972874

#SPJ11

If the population is below this size, it will grow; if it is above this size, it will decline; and if it is exactly equal to this size, it will remain stable

increases or is extinguished, given the adult and juvenile survival rates and the rate playback, as required in the question.

Population growth can be modeled using a linear system of differential equations in the form: P' = AP + R

where P is the column vector consisting of the number of juveniles and adults, A is the matrix representing the survival rates of the juveniles and adults, and R is the column vector of reproduction rates.

Assuming there are two populations: juvenile and adult, the equation for the population model can be expressed as a system of linear differential equations as follows:P' = AP + R,

where P = (J, A)^T,

A is the survival rate matrix, and R is the playback rate vector.Since the population model is a system of linear differential equations, we can use matrix algebra to determine if the population stabilizes, increases, or is extinguished.

To determine if the population stabilizes, increases or is extinguished, we need to find the equilibrium point, P*, of the population model, which is given by:P* = (I - A)^(-1)RThis formula for P* gives the population size that corresponds to a stable, steady-state population.

If the population is below this size, it will grow; if it is above this size, it will decline; and if it is exactly equal to this size, it will remain stable.

In other words, if P* > 0, the population will grow; if P* < 0, the population will decline, and if P* = 0, the population will remain stable.

To know more about rate visit :-

https://brainly.com/question/119866

#SPJ11

In this problem, we are given a function M(x, y) = xy - y^2 and a path defined by the equations x = t^2, y = t, where 1 < t < 3. We need to evaluate the line integrals of the function along this path and plot the path.

To evaluate the line integral of the function M(x, y) = xy - y^2 along the given path, we need to parameterize the path. We can do this by substituting the given equations x = t^2 and y = t into the function.

Substituting the equations into M(x, y), we have M(t) = t^3 - t^2. Now, we need to find the derivative of t with respect to t, which is 1. Therefore, the line integral becomes ∫(t=1 to t=3) (t^3 - t^2) dt.

To evaluate the line integral, we integrate the function M(t) from t = 1 to t = 3 with respect to t. This will give us the value of the line integral along the given path.

To plot the path, we can use the parameterization x = t^2 and y = t. By varying the value of t from 1 to 3, we can generate a set of points (x, y) that lie on the path. Plotting these points on a coordinate system will give us the visualization of the path defined by x = t^2, y = t.

To learn more about line integrals, click here:

brainly.com/question/30763905

#SPJ11

The population in this study is all American citizens.

The sample in this study is the group of 1200 Americans who were asked if they have served in the military.

The parameter in this study is the proportion of American citizens who have served in the military.

The statistic in this study is the proportion of the sample who have served in the military.

If all Americans were asked if they have served in the military, it would be known as a census.

For the scenario regarding the average value of homes in Kentucky:

The variable in this study is the value of homes.

The average value of all homes in the state of Kentucky is known as the population mean.

The average value of the 2000 homes in the sample is known as the sample mean.

The sample may or may not be representative of the population, depending on how the homes were selected.

The sample of 2000 homes should be selected randomly or using a sampling method that ensures every home in the population has an equal chance of being included.

Regarding the branch of statistics:

The branch of statistics for calculating the average length of adult sand sharks is inferential statistics.

The branch of statistics for calculating the average rushing yards per game for a football team is descriptive statistics.

The mathematical reasoning used in inferential statistics is known as hypothesis testing or statistical inference.

Understanding properties of a sample from a known population is known as descriptive statistics.

When a sample is selected with equal probability, it is known as a simple random sample.

Regarding the type of variable:

Political party affiliation: Categorical (Nominal)

Distance traveled to get to school: Quantitative (Continuous)

Student ID number: Categorical (Nominal)

Number of children in a household: Quantitative (Discrete)

Amount of time spent studying for a test: Quantitative (Continuous)

Learn more about types population

brainly.com/question/13096711

#SPJ11

There are 3 zeros of the polynomial f(z) = z⁵ - 3z⁴ + 2z - 10i in the annulus A(0; 1, 2), counting multiplicities.

To determine the number of zeros in the given annulus, we can use the Argument Principle and Rouché's theorem. Let's define two functions: g(z) = -3z⁴ and h(z) = z⁵ + 2z - 10i.

Considering the boundary of the annulus, which is the circle C(0; 2), we can calculate the number of zeros of f(z) inside the circle by counting the number of times the argument of f(z) winds around the origin. By the Argument Principle, the number of zeros inside C(0; 2) is given by the change in argument of f(z) along the circle divided by 2π.

Now, let's compare the magnitudes of g(z) and h(z) on the circle C(0; 2). For any z on this circle, we have |g(z)| = 3|z⁴| = 48, and |h(z)| = |z⁵ + 2z - 10i| ≤ |z⁵| + 2|z| + 10 = 2²⁵ + 2(2) + 10 = 80.

Since |g(z)| < |h(z)| for all z on C(0; 2), Rouché's theorem guarantees that g(z) and f(z) have the same number of zeros inside C(0; 2).

Now, let's consider the circle C(0; 1). For any z on this circle, we have |g(z)| = 3|z⁴| = 3, and |h(z)| = |z⁵ + 2z - 10i| ≤ |z⁵| + 2|z| + 10 = 13.

Since |g(z)| < |h(z)| for all z on C(0; 1), Rouché's theorem guarantees that g(z) and f(z) have the same number of zeros inside C(0; 1).

Since g(z) = -3z⁴ has 4 zeros (counting multiplicities) inside C(0; 2) and inside C(0; 1), f(z) also has 4 zeros inside each of these circles. However, the number of zeros inside C(0; 2) that are not inside C(0; 1) is given by the difference in argument of f(z) along the circles C(0; 2) and C(0; 1), divided by 2π.

As f(z) = z⁵ - 3z⁴ + 2z - 10i, and its leading term is z⁵, the argument of f(z) will change by 5 times the change in argument of z along the circles.

Since the change in argument of z along each circle is 2π, the difference in argument of f(z) along C(0; 2) and C(0; 1) is 5(2π) - 2π = 8π. Thus, f(z) has 4 zeros inside C(0; 2) that are not inside C(0; 1).

Therefore, f(z) has a total of 4 zeros (counting multiplicities) inside the annulus A(0; 1, 2).

To know more about Argument Principle, refer here:

https://brainly.com/question/13363140#

#SPJ11

The volume of the solid generated by revolving the region bounded by the curve y - 7sec(x) and the line y = (14√3)/3 over the interval -π/6, we can use the method of cylindrical shells.

The volume can be computed by integrating the area of each cylindrical shell over the given interval.To find the volume using cylindrical shells, we integrate the area of each shell over the given interval. The radius of each shell is given by the difference between the line y = (14√3)/3 and the curve y - 7sec(x). The height of each shell is given by the differential dx.

The integral to compute the volume is V = ∫[a, b] 2π(radius)(height) dx, where a = -π/6 and b = π/6.

Substituting the values into the integral, we have V = ∫[-π/6, π/6] 2π((14√3)/3 - (y - 7sec(x))) dx.

Simplifying the expression inside the integral, we get V = ∫[-π/6, π/6] 2π((14√3)/3 + 7sec(x) - y) dx.

Evaluating this integral will give us the volume of the solid in cubic units.

To learn more about cylindrical.

Click here:brainly.com/question/30627634?

#SPJ11

The greatest common factor is 5 (5 x 1 = 5, 5 x 21 = 105, 5 x 2 = 10, and 5 x 11 = 55).

a. Factors of 105 in ascending order: (1, 3, 5, 7, 15, 21, 35, 105).

b. Factors of 110 in ascending order: (1, 2, 5, 10, 11, 22, 55, 110).

c. Common factors of 105 and 110 are (1, 5).

d. The greatest common factor of 105 and 110 is 5.

e. The prime factorization of 105 is 3*5*7 and that of 110 is 2*5*11.

Multiplying what is below either of the two lines in the table in the attached image will give us the greatest common factor of 105 and 110.

To know more about factor visit:

https://brainly.com/question/23846200

#SPJ11