answer the following questions: which block has a higher temperature? iron does the hotter block have more energy inside? look closely! yes how would you explain that after putting in the same amount of heat, the two blocks have different temperatures? different

Here are three ideas for a biodiversity project that are affordable and budget-friendly: Create a pollinator garden, Conduct a citizen science project, and Host a wildlife-friendly event.

Biodiversity refers to the variety of living organisms that exist in a particular ecosystem, region, or entire planet. It includes all species of plants, animals, fungi, and microorganisms, as well as the genetic diversity within these species and the ecological diversity of the ecosystems they inhabit.

Biodiversity plays a crucial role in maintaining the balance and stability of ecosystems and the natural processes that support life on Earth. It provides us with a range of essential services, such as pollination, soil formation, water purification, and climate regulation, that are vital for human well-being. It is, therefore, essential to protect and conserve biodiversity by promoting sustainable use and management of natural resources, restoring degraded habitats, and implementing effective conservation measures.

To learn more about Biodiversity visit here:

brainly.com/question/13073382

#SPJ4

Complete Question:

Top 3 ideas based upon affordability biodiversity project that is affordable and budget-friendly?

(a) The effort required to push the block up the slope is 3600 N.

(b) the ideal mechanical advantage of the slope is 2.92

(c) The efficiency of the slope is 68.5%.

a) To calculate the effort required to push the block up the slope, we can use the formula:

Effort = Load / AMA

where;

Load = 7200 N

AMA = 2

Effort = 7200 N / 2

Effort = 3600 N

b) The ideal mechanical advantage (IMA) of an inclined plane is given by the formula:

IMA = Length of slope / Height of slope

Length of slope = 100 m

Angle of slope = 20°

We can use trigonometry to find the height of the slope:

Height of slope = Length of slope x sin(angle of slope)

Height of slope = 100 m x sin(20°)

Height of slope = 34.2 m (rounded to one decimal place)

Therefore, the ideal mechanical advantage of the slope is:

IMA = 100 m / 34.2 m

IMA = 2.92 (rounded to two decimal places)

c) The efficiency of the slope is given by the formula:

Efficiency = AMA / IMA x 100%

AMA = 2

IMA = 2.92

Efficiency = 2 / 2.92 x 100%

Efficiency = 68.5% (rounded to one decimal place)

Learn more about effort here: https://brainly.com/question/24237657

#SPJ1

The direction of the resultant force is 53.13 degrees from the horizontal in the direction of the vector B.

To find the direction of the resultant force, we can use the inverse tangent function (tan⁻¹) and the ratios of the sides of a right triangle.

The angle that the resultant force makes with the horizontal can be found by:

tan θ = Fy/Fx

where;

θ = tan⁻¹ (4 N / 3 N) = 53.13 degrees

Learn more about direction of force here: https://brainly.com/question/25239010

#SPJ1

The complete question is below:

Two forces A and B, with magnitude 3 N and 4 N, line horizontal and vertical respectively.

What is the direction of the resultant force?

The right hand rule for the direction of propagation of the electromagnetic waves is to point the fingers of your right hand toward the e vector, curl your fingers towards the b vector, and the thumb will point the direction of propagation. Therefore, the option c is correct.

Learn more about electromagnetic waves: https://brainly.com/question/25847009

#SPJ11

No because it fails the vertical line test

The vertical line test is a test used to determine whether a relation is a function. It states that a relation is a function if and only if any vertical line intersects the graph of the relation at most once.

If a relation fails the vertical line test, it means that there are two or more points on the graph with the same x-coordinate, and therefore, the relation is not a function.

Therefore, for a relation to be a function, it must pass the vertical line test.

Learn more about vertical line test:https://brainly.com/question/29263148

#SPJ1

To ensure accurate and reliable melting point determinations, it is important to avoid reusing a sample that has been melted and solidified.

It is important to avoid reusing a sample that has been melted and solidified when determining its melting point because the process of melting and cooling can cause changes in the sample's structure and purity, which can affect the accuracy of subsequent melting point determinations.

When a solid sample is melted, its molecules or ions are rearranged, and the sample's crystal lattice structure is disrupted. Upon solidification, the sample's structure may not fully reform, resulting in impurities or defects in the crystal lattice. These impurities or defects can cause the sample to have a lower melting point than it would have had if it had not been melted.

Reusing a sample that has been melted and solidified can introduce additional impurities and defects into the sample, which can further lower its melting point. As a result, using the same sample for subsequent melting point determinations can lead to inconsistent and inaccurate results.

Learn more about melting point here

brainly.com/question/30930185

#SPJ4

The angular position of the large, cylindrical roller with a diameter of 4.00 m is a measurement of the amount of rotation of the roller in relation to a fixed axis.

In a manufacturing process, a large, cylindrical roller is used to flatten material fed beneath it. The diameter of the roller is 4.00 m, and, while being driven into rotation around a fixed axis, its angular position is expressed as. Angular position refers to the position of a rotating object relative to a reference point. It is a measure of how far an object has rotated around a particular axis relative to a reference point. The angular position of an object is typically measured in radians or degrees. The angular position of a rotating object can be described as a function of time by its angular velocity and its initial angular position. The formula for angular position is given as,θ = ωt + θ₀where,θ is the angular position of the object at time tω is the angular velocity of the objectθ₀ is the initial angular position of the object.

For the given problem, the angular position of the cylindrical roller is expressed as,θ = ωt + θ₀where,ω = Angular velocity

t = Time

θ₀ = Initial angular position

Given,

The diameter of the roller = 4.00 m

Radius of the roller = 2.00 m

The angular position of the roller is expressed as,

θ = 2.00t

where,θ is in radians and t is in seconds.

Therefore, the angular position of the roller is given by the formula,θ = ωt + θ₀

where,ω = 2.00 rad/st = Timeθ₀ = 0So,θ = 2.00t rad

By substituting the value of ω into the formula θ = ωt, we can calculate the angular position of the roller in terms of time.

In other words, it is the angle through which the roller has been rotated around a point of reference.

To know more about Angular position please visit :

https://brainly.com/question/14864570

#SPJ11

In a manufacturing process, a large, cylindrical roller is used to flatten material fed beneath it. The diameter of the roller is 4.00 m, and, while being driven into rotation around a fixed axis, its angular position is expressed as θ = 2.10t2 − 0.850t3 where θ is in radians and t is in seconds. (a) Find the maximum angular speed of the roller. rad/s (b) What is the maximum tangential speed of a point on the rim of the roller? m/s (c) At what time t should the driving force be removed from the roller so that the roller does not reverse its direction of rotation? s (d) Through how many rotations has the roller turned between t = 0 and the time found in part (c)? rotations

The force exerted to push the 25 Kg wooden box across the wooden floor at a constant speed of 1.0 m/s is 49 N (2nd option)

Frictional force is given by the following formula

Frictional force = coefficient of friction (μ) × normal reaction (N)

Since the speed is constant,

Frictional force = Force exerted

Thus,

Force exerted = coefficient of friction (μ) × normal reaction (N)

F = μN

Now, we shall determine the force exerted to push the box. Details below:

F = μN

F = 0.2× 245

F = 49 N

Thus, the force exerted to push the box is 49 N (2nd option)

Learn more about force:

https://brainly.com/question/29509981

#SPJ1

Answer: no

Explanation: an electric field must be present so if the bulb is off then there's no charge to the bulb for the electromagnetic field to interact

The method that Josh should use to separate a mixture of sulfur powder and iron filings is magnetic separation.

Magnetic Separation is a process that separates magnetic materials from non-magnetic materials. In this case, iron filings are magnetic, while sulfur powder is not. By using a magnet, Josh can easily separate the iron filings from the sulfur powder. To perform magnetic separation, Josh can place the mixture of sulfur powder and iron filings on a piece of filter paper and move a magnet underneath the paper. The iron filings will be attracted to the magnet and will stick to it, while the sulfur powder will remain on the filter paper. This method is effective because it is simple and does not require any chemicals or complex equipment. It is also a quick way to separate the two substances, which is important in a lab setting where time is limited. In summary, Josh should use magnetic separation to separate the mixture of sulfur powder and iron filings in his lab.

To learn more about Magnetic Separation click the link below

brainly.com/question/3106534

#SPJ4

The only vehicle capable of outpacing the Ninja H2R out of the box was the severely tuned, 1,350 horsepower SPE Nissan GT-R, which caught and passed the superbike at the.

Slowly coming off the line, the biker eventually catches up with and surpasses the Veyron.When the H2R triggers the speed camera at 194.5 mph—nearly 15 mph faster than that of the Bugatti—it is still harsh in acceleration.

The bike easily overtakes the Lamborghini after another strong start from the latter.In comparison, the Huracan needs 9.6 seconds to finish the quarter mile.

To know more about horsepower visit:

https://brainly.com/question/13259300

#SPJ1

Based on the data, we can infer that Rachel is moving faster because the slope of her line is steeper (option B).

To identify the runner who was going faster we must take into account the information in the graph. In this case, Rachel's line shows that she has covered more distance in less time than Kathy.

Therefore, Rachel's line is steeper than Kathy's. In this case, Kathy has taken about 70 minutes to cover 7 kilometers. While Rachel has taken 50 minutes to travel about 90 km.

Learn more about kilometers in: https://brainly.com/question/13987481

#SPJ1

The plastic affects how light hits the screen due to the different index of refraction that plastic has.

Any material that light passes through can affect how the light hits the screen. The way that a material affects light depends on its optical properties, such as its index of refraction, absorption, and scattering.

For example, if the clear plastic has a different index of refraction than the air or glass, it can cause the light to bend or refract as it passes through, which can affect the direction of the light as it hits the screen. Additionally, if the plastic absorbs or scatters certain wavelengths of light, it can affect the color or intensity of the light that hits the screen.

Find out more on light at https://brainly.com/question/20456212

#SPJ1

Two resistors have resistances r(smaller) and r(larger), where r(smaller) When the resistors are connected in series to a 12.0-V battery, the current from the battery is 1.13 A. When the resistors are connected in parallel to the battery, the total current from the battery is 10.6 A.the two resistances are 2.40 Ω and 8.30 Ω.

The current through both resistors is the same, and can be found using Ohm's law:

I_series = [tex]\frac{V}{R}[/tex]_series

where V is the voltage of the battery. We are given that I_series = 1.13 A and V = 12.0 V, so we can solve for R_series:

R_series = [tex]\frac{V}{I}[/tex]_series = 12.0  [tex]\frac{V}{I}[/tex] 1.13 A = 10.62 ΩWhen the resistors are connected in parallel, the total resistance is:

[tex]\frac{1}{R}[/tex]_parallel = 1/r(smaller) + 1/r(larger)

The total current from the battery is the sum of the currents through each resistor:

I_parallel = [tex]\frac{V}{R}[/tex]_parallel

where V is the voltage of the battery. We are given that I_parallel = 10.6 A and V = 12.0 V, so we can solve for R_parallel:

R_parallel =  [tex]\frac{V}{I}[/tex]_parallel = 12.0 V / 10.6 A = 1.13 Ω

Now we have two equations with two unknowns (r(smaller) and r(larger)):

R_series = r(smaller) + r(larger)

1/R_parallel = 1/r(smaller) + 1/r(larger)

We can solve for r(smaller) and r(larger) using algebra. Rearranging the first equation, we get:

r(larger) = R_series - r(smaller)

Substituting this expression into the second equation and simplifying, we get:

1/R_parallel = 1/r(smaller) + 1/(R_series - r(smaller))

Multiplying both sides by r(smaller)(R_series - r(smaller)), we get:

r(smaller)(R_series - r(smaller))/R_parallel = R_series - r(smaller) + r(smaller)

Simplifying, we get:

[tex]r(smaller)^{2}[/tex] - R_series r(smaller) + R_series/R_parallel = 0

Using the quadratic formula, we get:

r(smaller) = [R_series ± [tex]\sqrt{(R_series^2 - 4R_series/R_parallel)}[/tex]] / 2

Plugging in the values for R_series and R_parallel, we get:

r(smaller) = [10.62 Ω ± [tex]\sqrt{(10.62^2 - 4(10.62/1.13))}[/tex]] / 2 = 2.40 Ω or 8.30 Ω

Since r(smaller) is the smaller resistor, it must be 2.40 Ω and r(larger) must be 8.30 Ω.

Therefore, the two resistances are approximately 2.40 Ω and 8.30 Ω.

For such more questions on resistors:

brainly.com/question/30611906

#SPJ11

A type of eye surgery called a vitrectomy is performed to repair issues with the retina and vitreous of the eye.

It is clear the retina of any blood or other substances preventing correct light focus. Scar tissue that is causing the retina to wrinkle or tear and impairing vision should be removed. It assist in repairing a detached (ripped away) retina from the eye wall.

It was from a wound, remove a foreign object that is lodged inside the eye. The ophthalmologist removes some or all of the vitreous from the centre of your eye during a vitrectomy. A gas or oil bubble, or a salt water (saline) solution, is used to replace the vitreous.

It is eye refills the saline fluid or the bubble throughout the healing process following surgery.

Thus, A type of eye surgery called a vitrectomy is performed to repair issues with the retina and vitreous of the eye.

Learn more about Eye surgery, refer to the link:

https://brainly.com/question/32079666

#SPJ12

The electric field inside the non-conductor sphere would be different. For a non-conductor sphere, the charge is distributed uniformly throughout the sphere, rather than being concentrated on the surface as in a conductor.

The electric field outside a uniformly charged solid sphere (conductor or non-conductor) is given by:

E = kQ/R^2

where k is the Coulomb constant, Q is the total charge on the sphere, and R is the radius of the sphere.

For the given solid metal sphere with a radius of 2.00 m and a total charge of -4.20 μC, we have:

E = (9.0 × 10^9 N·m^2/C^2) × (-4.20 × 10^-6 C) / (2.00 m)^2

E ≈ -9.86 N/C

The electric field is negative, which indicates that the direction of the electric field is inward, toward the center of the sphere.

For a solid non-conductor sphere that is uniformly charged throughout, the electric field outside the sphere can still be calculated using the same formula. The total charge Q on the sphere and the radius R of the sphere would be the same as for the metal sphere. Therefore, the magnitude of the electric field outside the solid non-conductor sphere would be the same as for the metal sphere:

E = kQ/R^2

E = (9.0 × 10^9 N·m^2/C^2) × (-4.20 × 10^-6 C) / (2.00 m)^2

E ≈ -9.86 N/C

However, the electric field inside the non-conductor sphere would be different. For a non-conductor sphere, the charge is distributed uniformly throughout the sphere, rather than being concentrated on the surface as in a conductor. Therefore, the electric field inside the non-conductor sphere would be zero. This is because the electric field due to one element of charge is cancelled by the electric field due to an opposite element of charge located on the opposite side of the sphere.
For such more questions on conductor:

brainly.com/question/12966347

#SPJ11

The two stones will meet at a height of approximately 83.1 meters above the ground.

y1 = 0.5 * g * t^2

At the same time, another stone is projected vertically upwards from the ground with a velocity of 20 m/s.

y2 = v0 * t + 0.5 * g * t^2

0.5 * g * t^2 = 100 - v0 * t - 0.5 * g * t^2

Simplifying and rearranging, we get:

t = (2 * v0) / g

Substituting the values of v0 and g, we get:

t = (2 * 20) / 9.81 ≈ 4.08 s

So the two stones will meet after 4.08 seconds.

To find the height at which they meet, we can substitute this value of t into either of the equations for y1 or y2. Let's use the equation for y1:

y1 = 0.5 * g * t^2 = 0.5 * 9.81 * (4.08)^2 ≈ 83.1 m

Velocity is a fundamental concept in physics that describes the rate at which an object's position changes with respect to time. It is a vector quantity that specifies both the magnitude and direction of motion.

Mathematically, velocity can be defined as the change in an object's position over a given time interval. The formula for velocity is v = Δx/Δt, where v is the velocity, Δx is the change in position, and Δt is the change in time. Velocity is different from speed, which only describes the magnitude of motion and not its direction. In other words, velocity takes into account the direction of motion while speed does not.

To learn more about Velocity visit here:

brainly.com/question/30559316

#SPJ4

Complete Question:

A stone is allowed to fall from the top of a tower 100m high and at the same time, another stone is projected vertically upwards from the ground with a velocity of 20m/s. Calculate when and where the two stones will meet.

Explanation:

To find the volume of a pencil, you need to use the formula for the volume of a cylinder, which is:

V = πr²h

where V is the volume, π (pi) is a mathematical constant approximately equal to 3.14, r is the radius of the circular base of the cylinder (in this case, the radius of the pencil), and h is the height of the cylinder (in this case, the length of the pencil).

To find the radius of the pencil, you can measure the distance across the circular cross-section of the pencil at its widest point. Divide this distance by 2 to get the radius.

To find the length of the pencil, you can measure it from one end to the other end.

Once you have the radius and length, you can substitute these values into the formula for the volume of a cylinder and calculate the volume of the pencil in cubic units (e.g. cubic centimeters or cubic inches).

The magnitude of the force exerted on the femur by the lower leg while undergoing traction is 55.4 N

The magnitude of the force exerted on the femur by the lower leg is equal to the sum of the weight of the leg and the weight hanging from the traction apparatus.

Traction is a treatment method in which a patient's limb is pulled by weights and pulleys to stretch and strengthen the soft tissues and joint structures around the bone. Traction may be used to treat broken bones, dislocated joints, or muscle or ligament strains.

The weight of the leg = 27.7 N

The weight hanging from the traction apparatus = 27.7 N

The magnitude of the force exerted on the femur by the lower leg

= Weight of the leg + Weight hanging from the traction apparatus

= 27.7 N + 27.7 N= 55.4 N

Therefore, the magnitude of the force exerted is 55.4 N.

To know more about force, refer here:

https://brainly.com/question/29769471#

#SPJ11

It is true that we are active participants in our lives and not just observers. We make sense of the sensations we encounter by forming mental models of what is happening around us. We are constantly refining these models in light of our observations and experiences.

In order to make wise decisions and actively and positively participate in the democratic cultures, they live in, citizens must possess the competencies that active participation calls for. These competencies include a level of awareness of oneself in relation to the environments into which they are thrust.

The fundamental tenets of active participation include promoting an individual's rights, choices, and independence.

For such more questions on active participant :

brainly.com/question/19691125

#SPJ4

Answer:

19pr

Explanation:

Answer:

B. Sunlight is less spread out near the equator .

Explanation:

The Earth is tilted on its axis so some places will receive Solar energy at an oblique angle and some at a direct angle.

Moving from the equator to the poles, sunlight hits Earth at a less direct angle, so the Sun's rays are more spread out and aren't as intense. Places near the poles are cooler than places near the equator because the sunlight they receive is more spread out (less concentrated), and the surface doesn't warm up as much.

At the equator the sun hits the Earth at a direct angle so the sun's rays are less spread out and more concentrated. This makes equatorial regions much warmer than polar regions .

The largest value of speed that can be achieved without breaking the string is 2.47 m/s.

The force required to keep an object moving in a circle is given by the centripetal force formula:

[tex]$F = \frac{mv^2}{r}$[/tex]

Where F is the tension force, m is the mass of the stone, v is the velocity, and r is the radius of the circle.

Since the string has a length of 1.5 m, and the stone is tied to the end of the string, the radius of the circle is equal to the length of the string:[tex]$$r = 1.5 m$$[/tex]

Next, we need to find the tension force that the string can withstand without breaking, which is given as:

[tex]$F_{max} = 12.3 \ N$[/tex]

Finally, we can substitute these values into the formula above and solve for v:

[tex]$F_{max} = \frac{mv^2}{r}$[/tex]

[tex]$12.3 \ N = \frac{(3 \ kg)(v^2)}{(1.5 \ m)}$[/tex]

[tex]$v^2 = \frac{12.3 \ N \cdot 1.5 m}{3\  kg}$[/tex]

[tex]v^2 = 6.15 \frac{m^2}{s^2}[/tex]

$$v = \sqrt{6.15} \frac{m}{s}$$

$$v \approx 2.47 \frac{m}{s}$$

Therefore, the largest value that v can have without breaking the string is approximately 2.47 m/s.

Learn more about centripetal force:

https://brainly.com/question/20905151

#SPJ11

A laser used for surgery directs most of the light only toward the patient. But suppose that a small fraction of the light, 4.54 watts, leaks out and travels equally in all directions. A surgeon without protection should stay away from this laser at least: 9.05 meters.

The exposure to laser radiation poses potential hazards, including injury to the skin, eyes, or other parts of the body. The distance between the source of the laser radiation and the surgeon depends on the intensity of laser radiation, and the duration of the exposure.

The intensity of the laser beam is the power of the beam divided by the surface area perpendicular to the direction of the beam. The laser radiation to which a person is exposed is determined by the distance between the source and the person, as well as the degree of divergence of the beam.

As the distance between the person and the source increases, the amount of radiation decreases. Therefore, the intensity of radiation is inversely proportional to the square of the distance. Using the equation, Power = Intensity × Surface area, we can calculate the surface area.

We know that the power of the leaked laser light is 4.54 watts and the safe intensity of laser light is 0.0204 watts per meter squared. Therefore, the surface area is

Surface area = power/intensity

= 4.54/0.0204=222.549 meters squared.

The distance between the surgeon and the laser light can be calculated by using the formula

Surface area of a sphere = 4πr²

Where r is the radius of the sphere.

As the laser light travels equally in all directions, the surface area of the sphere is given as

Surface area of a sphere = 4πr²= 222.549 meters squared. We can find the radius r by dividing the surface area of the sphere by 4π. Therefore, [tex]r^{2} = 222.549/4\pi r^{2}= 17.747r = \sqrt{17.747r}  = 4.212 meters[/tex]

The surgeon without protection should stay at least 4.212 meters away from laser in meters.

To know more about laser refer here:

https://brainly.com/question/4869798#

#SPJ11

A magnifying glass has a convex lens. In the context, option a. a convex lens because it will focus the light to make objects appear larger is the correct answer.

Learn more about magnifying glasses: https://brainly.com/question/20876425

#SPJ11

It is possible for a body to move at a constant speed and still be in accelerating motion if its direction of motion is changing, i.e., it is undergoing circular motion. In circular motion, the direction of velocity of the body is changing constantly, resulting in a change in its acceleration even though its speed remains constant.

When a car is going around a circular track with constant speed, the centripetal force necessary for circular motion is provided by frictional force between the tires of the car and the surface of the track.

In circular motion, the direction of acceleration is towards the center of the circle, while the direction of net force is also towards the center of the circle. If the speed of an object is changing while rotating in a circular motion, the direction of net force remains towards the center of the circle, but the direction of acceleration may change depending on the direction of change in speed.

In this experiment, if the point on the arm hanging the bob and the pointer are not on the same vertical line, it would result in an error in the measurement of the period of oscillation of the bob. The period of oscillation is directly proportional to the length of the arm, and if the arm is not vertical, the effective length of the arm will change, resulting in an inaccurate measurement of the period.

If there is no spring attached and the bob is rotated at a constant speed, the centripetal force required for circular motion would be provided by the tension in the string. The tension in the string would act towards the center of the circle and provide the necessary force to keep the bob moving in a circular path.

Click the below link, to learn more about constant speed:

https://brainly.com/question/30551791

#SPJ11

In Audition, a high frequency of vibration, as measured in hertz (Hz), would be perceived as a high-pitched sound. Hence, option A is correct.

What is an Audition? Audition is the sense of hearing, which involves the conversion of sound waves into neural signals in the brain. The sensory system responsible for the audition, the auditory system, is located in the inner ear. The sensory organs responsible for detecting sound waves are the hair cells, which are located in the cochlea's inner and outer membranes.

What is Vibration? When an object moves back and forth, it is referred to as vibration. These movements can be back and forth, up and down, or in a circular motion. The vibrations of an object cause sound waves to be generated in the air, which we perceive as sound.

A high frequency of vibration, as measured in hertz (Hz), would be perceived as a high-pitched sound. This is because high-frequency sound waves have a higher pitch than low-frequency sound waves.

Therefore, option A, "high-pitched," is the correct answer.

To learn more about frequency refer to: brainly.com/question/29235085

#SPJ11

In the film Deep Impact (1998), the government kept the presence of the incoming comet a secret for only a few months.

Deep Impact is a 1998 American science-fiction disaster film directed by Mimi Leder, written by Bruce Joel Rubin and Michael Tolkin, and produced by Steven Spielberg's Amblin Entertainment. The movie's plot revolves around a comet that is on a collision course with Earth, and the film follows the attempts of scientists and political leaders to save the planet. Deep Impact starred Robert Duvall, Téa Leoni, Elijah Wood, Vanessa Redgrave, Maximilian Schell, and Morgan Freeman in the leading roles. Its production budget was estimated to be $75 million, and it grossed $349 million worldwide, making it the eighth-highest-grossing film of 1998.

Know more about leading roles

https://brainly.com/question/14724703

#SPJ11

For a simple harmonic oscillator, displacement and velocity vectors are in the same direction only at the equilibrium position. They are at 90° to each other at the amplitude positions, and the phase difference is 90°.

Learn more about simple harmonic oscillator: https://brainly.com/question/27237546

#SPJ11