answer questions 3 and 4 for a brainly!

Answer:

Increased the concentration

Explanation:

Complete Question

Open the simulation by pushing the play button.  Begin by dragging the concentration tester overto the liquid and add drink mix until the concentration reaches approximately 2.oo mol/L.  This means there are 2.00 moles of the drink mix in 1 Liter of the solution. Add more drink mix until you notice a color change. Have you increased or decreased the concentration? (Higher number means a higher concentration).

Solution

Drink mix is basically the solute which is added to solvent i.e water.

The higher is the amount of drink mix in the solvent, the higher is the concentration of the solute and hence darker is the color of the drink.

Hence, in the case the concentration of the drink has been increased.

When two surface come in contact and rub each other a frictional force causing them s deformation and this leads to a voltage giving rise to a static charge.

Static charge is developed within a body temporarily with an induced polarization. These charges are not moving and set into a pole in the material.

When two materials rub against each other in which one is a conductor and other to be an insulator, they will attract by the induced polarization. Rubbing causes the free electrons in the condutor to be transferred towards the insulator.

This will cause a deformation that, the random charges in the material get polarized where the electrons in the insulator will repel to the opposite pol and positive charges will align in a pole close to the condutor.

This charge separation causes the positive pole of the insulator gets attracted into the conductor surface. Hence, there forms a static electricity by the passage of electron.

To find more on static electricity, refer here:

https://brainly.com/question/12791045

#SPJ5

Answer:

0.97

Explanation:

Let R₁ represent the rate of diffusion of NO.

Let R₂ represent the rate of diffusion of CO.

Molar mass of NO (M₁) = 14 + 16 = 30 g/mol

Molar mass of CO (M₂) = 12 + 16 = 28 g/mol

Thus, the rate of NO to CO can be obtained as follow:

R₁ /R₂ = √(M₂/M₁)

R₁ /R₂ = √(28/30)

R₁ /R₂ = √(28/30)

R₁ /R₂ = 0.97

R₁ : R₂ = 0.97

NO : CO = 0.97

Therefore, the rate of diffusion of NO to CO is 0.97

Answer:

51207 torr is the new pressure of the gas

Explanation:

We can solve this question using combined gas law that states:

P1V1T2 = P2V2T1

Where P is pressure, V volume and T absolute temperature of 1, initial state and 2, final state of the gas

Computing the values of the problem:

P1 = 710torr

V1 = 5.0x10²mL

T1 = 273.15 + 30°C = 303.15K

P2 = ?

V2 = 25mL

T2 = 273.15 + 820°C = 1093.15K

Replacing:

710torr*5.0x10²mL*1093.15K = P2*25mL*303.15K

3.881x10⁸torr*mL*K = P2 * 7.579x10³mL*K

P2 = 51207 torr is the new pressure of the gas

Answer:

Disrupted food webs

increased competition

disrupted life-cycle events

forced relocation

Explanation:

Global warming refers to a gradual rise in the temperature of the earth due to the increase in the concentration of greenhouse gases in the atmosphere which trap infrared radiation close to the earth.

This gradual increase in the temperature of the earth often have devastating effects on the lives of various organisms on earth. These effects include;

Disrupted food webs

increased competition

disrupted life-cycle events

forced relocation

Due to changes that occur in the ecosystem as a result of global warming, many species may be compelled to relocate from place to place. This in turn disrupts food webs and may lead to disruption of life cycle events of the concerned organisms. Decrease in the number of certain populations due to global warming may lead to increased competition among species for food.

Explanation:

Hope it's helpful for Yuh bro!!

Answer:

Friendship is, in many respects, a "comfortable" love relationship. Friendships involve as little or as much intimacy as the partners are inclined to express at any given time. Friends are not normally obligated to exchange benefits, but do so in ways that are often so natural as to be unwitting. The ties that bind them are by unfettered mutual consent. In spite of its being so comfortable, in fact because of it, friendship contributes in unique ways .

Answer:

najah zggs haihß hajoa ha8 a an àjàhajß

Answer:

Se administran 2500 gramos de solución por día.

Explanation:

Dado

Volumen de la solución = 2,5 litros

Como sabemos 1 litro = 1000 gramos

Por lo tanto, 2.5 litros = 2500 gramos

Se administran 2,5 litros en un intervalo de 24 horas o 1 día.

De ahí que se pueda decir que se administran 2500 gramos de solución al día.

Answer: 30 g LiF

Explanation:

Answer:

96.3g is the actual yield from this reaction

Explanation:

Have been 113g...

The percent yield of a reaction is defined as one hundred times the ratio between actual yield (Our incognite) and the theoretical yielf (113g). The equation is:

Percent yield = 85.22% = Actual Yield / 113g * 100

0.8522 = Actual Yield / 113g

0.8522*113g =

96.3g is the actual yield from this reaction

Answer:

96.3

Explanation:

Just took the test

Answer:

71.92 kPa

Explanation:

Using the combined gas law equation;

P1V1/T1 = P2V2/T2

Where;

P1 = initial pressure (kPa)

P2 = final pressure (kPa)

V1 = initial volume (L)

V2 = final volume (L)

T1 = initial temperature (K)

T2 = final temperature (K)

According to the information provided in this question;

T1 = 50°C = 50 + 273 = 323K

V1 = 105L

T2 = -25°C = -25 + 273 = 248K

P2 = 105.4 kPa

P1 = ?

V2 = 55.0 L

Using P1V1/T1 = P2V2/T2

P1 × 105/323 = 105.4 × 55/248

105P1/323 = 5797/248

0.325P1 = 23.375

P1 = 23.375 ÷ 0.325

P1 = 71.92 kPa

Answer:

yup

Explanation:

because chemical change took place

the reaction cant be reversible

Answer:

Wavelength of electromagnetic wave = 4.0 × 10³

Explanation:

Given:

Wavelength of electromagnetic wave = 4000 meter

Find:

Write, Wavelength of electromagnetic wave into scientific notation

Computation:

Wavelength of electromagnetic wave = 4000 meter

Wavelength of electromagnetic wave = 4.0 × 1,000 meter

Wavelength of electromagnetic wave = 4.0 × 10³

So,

Option "B" is the correct answer to the following question.

Hydroelectric energy is produced.

Answer:

Diffusion in gases

Diffusion is driven by differences in concentration. When chemical substances such as perfume are let loose in a room, their particles mix with the particles of air. The particles of smelly gas are free to move quickly in all directions

Explanation:

hope this helps

Answer:

Part A:

"360 grams of NaCl can be dissolved in 1 L water. So, 2000 grams sugar can be dissolved in 1 L water then we can say that the solubility of salt is lesser in water as to sugar and both heightened by increasing the temperature. If we make a batch of 800 L we can add sugar, 1600 kg at 25 0c. We can add salt is 288 kg at 25 0c and the ingredient tomato is having low solubility."

Read more at Answer.Ya.Guru – https://answer.ya.guru/questions/8061-describe-the-sequence-of-adding-ingredients-to-make-the-recipe.html

Part B:

'Manufacturers can generate new value minimize cost and increase operational stability by focusing on 4 broad areas; Management, Supply Circle, Product Design, and Value Recovery.'

Read more at Answer.Ya.Guru – https://answer.ya.guru/questions/2807911-what-changes-could-be-made-to-optimize-the-manufacturing-process.html

In order to make tomato soup, the salt NaCl is first added, then followed by sugar and finally the tomato powder.

Tomato soup is made of the following ingredients:

In order to make tomato soup, the salt NaCl is first added, then followed by sugar. This is to ensure increase in the boiling point of water and to reduce the heating time of the tomato soup.

The solution is heated to induce more dissolution if solute and finally the tomato powder is added.

In order to optimize the manufacturing process, changes should be made in the design, supply and composition of the soup.

Therefore, an optimized manufacturing process will reduce cost of production.

Learn more about tomato soup at: https://brainly.com/question/21475711

Answer:

The process of unstable (or radioactive) atoms becomes stable by emitting radiation. This event over time is called radioactive decay. Alpha decay results in the loss of two protons and two neutrons from the nucleus

Answer:

radioactive disintegration

Explanation:

Answer:

If a one kilogram block of lead absorbs 2,000 J of energy then the temperature rise will be larger. If 1,000 J of heat is absorbed by a 2 kg block of lead then the temperature of the block doesn't rise as much since the energy is shared between more particles.

Explanation:

Answer:

Explanation:

THE BEST ANSWER IS CCC

Answer:

n = 2.18 moles

Explanation:

Given that,

Mass = 127.5g

Molar mass of NaCl = 58.44 g/mol

We need to find the number of moles. We know that,

No. of moles = Given mass/molar mass

Put all the values,

[tex]n=\dfrac{127.5\ g}{58.44\ g/mol}\\\\n=2.18\ moles[/tex]

Hence, there are 2.18 moles of 127.5g of NaCl.

Answer: Molarity when 25.0 g of the compound [tex]NaClO_{3}[/tex]is placed in 85.0 mL of solution is 294.12 M.

Explanation:

Given: Mass = 25.0 g

Volume  = 85.0 mL (1 mL = 0.001 L) = 0.085 L

Molarity is the number of moles of a substance divided by volume in liter.

Hence, molarity of given solution is calculated as follows.

[tex]Molarity = \frac{mass}{Volume (in L)}[/tex]

Substitute the values into above formula as follows.

[tex]Molarity = \frac{mass}{volume (in L)}\\= \frac{25.0 g}{0.085 L}\\= 294.12 M[/tex]

Thus, we can conclude that molarity when 25.0 g of the compound [tex]NaClO_{3}[/tex]is placed in 85.0 mL of solution is 294.12 M.

Answer:

121.1g

Explanation:

First, we need to convert the number of molecules of NaCl to moles (n) by dividing by Avagadro number

That is, n = number of molecules ÷ 6.02 × 10²³

n = 1.25 X 10²⁴ ÷ 6.02 × 10²³

n = 1.25/6.02 × 10^ (24-23)

n = 0.207 × 10¹

n = 2.07moles

Using the formula; mole = mass ÷ molar mass

Molar mass of NaCl = 23 + 35.5 = 58.5g/mol

mass = molar mass × mole

mass = 58.5 × 2.07

mass = 121.1g

Answer:

289.8g

Explanation:

Using the formula as follows:

mole = mass/molar mass

Molar mass of SnF = 119 + 19

= 138g/mol

Using mole = mass/molar mass

2.1 = mass/138

mass = 2.1 × 138

mass = 289.8g

Answer:

Yes

Explanation:

Due to pollution, greenhouse gasses, etc

Humans are increasingly influencing the climate and the earth's temperature by burning fossil fuels, cutting down forests and farming livestock. This adds enormous amounts of greenhouse gases to those naturally occurring in the atmosphere, increasing the greenhouse effect and global warming.

The correct question is as follows:

How do you convert from grams to moles of a substance

1. Divide by the molar mass

2. Subtract the molar mass

3. Add the molar mass

4. Multiple by the molar mass

Answer: In order to convert from grams to moles of a substance divide by the molar mass.

Explanation:

The number of moles of a substance is the mass of substance in grams divided by its molar mass.

The formula to calculate moles is as follows.

[tex]Moles = \frac{mass}{molar mass}[/tex]

This means that grams are converted to moles when grams is divided by molar mass.

Thus, we can conclude that in order to convert from grams to moles of a substance divide by the molar mass.

Answer:

Hey mate.......

Explanation:

This is ur answer......

Climate change has been a key factor in increasing the risk and extent of wildfires in the Western United States. Research shows that changes in climate create warmer, drier conditions. Increased drought, and a longer fire season are boosting these increases in wildfire risk. But global warming has changed some of the underlying variables that make wildfires more or less likely to occur every year. Warmer temperatures increase the likelihood that fires will burn more intensely. They also cause snow to melt sooner, and lead to drier soils, forests, and plants, which act as kindling.

Hope it helps!

Brainliest pls!

Follow me! :)

Answer:

Explanation:

Hope it helps

#CarryOnLearning