^and this, it’s due in like 10 minutes so please help;)

Answer:

6.591

explanation

mass of weight is 1.092 , and mass of weight boat and sample = 7.683

mass of the solid sample= (mass of weight boat and sample) - (weight of the boat) = (1.092-7683) = 6.591 g

hence, the mass of the solid sample is 6.591 g

Answer:

CH₂

Explanation:

From the question given above, the following data were obtained:

Mass of Carbon (C) = 5.41 g

Mass of compound = 6.32 g

Empirical formula =?

Next, we shall determine the mass of Hydrogen (H) in the compound. This can be obtained as follow:

Mass of Carbon (C) = 5.41 g

Mass of compound = 6.32 g

Mass of Hydrogen (H) =?

Mass of H = mass of compound – mass of C

Mass of H = 6.32 – 5.41

Mass of H = 0.91 g

Finally, we shall determine the empirical formula of the compound. This can be obtained as follow:

Mass of C = 5.41 g

Mass of H = 0.91 g

Divide by their molar mass

C = 5.41 / 12 = 0.451

H = 0.91 / 1 = 0.91

Divide by the smallest

C = 0.451 / 0.451 = 1

H = 0.91 / 0.451 = 2

Thus, the empirical formula for the compound is CH₂

Answer:

(a). (I). 0.816; 0.816

(ii). 0.917.

(b). When the value for the critical extent of reaction is 0.866, then the number of moles of glycerol and the number of moles of di-carboxylic acid is the same. But, in this case the number of moles of glycerol is not the same with the number of moles of di-carboxylic acid.

Explanation:

So, without mincing words let's get straight into the solution to the question above.

(a). Using the (i) statistical theory of Flory to Determine the critical extent of reaction gelation, one has to make use of the two equations given below;

P(1) = [ v + vb ( n - 2)^-1/2 ------------------(1).

P(2) = v^1/2 [ 1 + b ( n - 2)^-1/2 ----------(2).

The value for v = 1.2 + 1.2/ 1.2 × 2 = 1.

The value of b = (1.2 + 1.2)/ 1.2 = 0.5.

Thus, putting the values into the equation (1) and (2) above gives;

NB: n = 3.

P(1) = [ 1 + 1 × 0.5 ( 3 - 2)^-1/2 = 0.816.

P(2) = 1^1/2 [ 1 + 0.5 ( 3 - 2)^-1/2 = 0.816.

Using the (ii) carother's theory to Determine the critical extent of reaction gelation.

We have the following values for glycerol: k = 0.4, n = 3.

For ethylene glycol; k = 0.6, n = 2.

Therefore, the critical extent of reaction gelation =2/[ (0.6 × 2) + (0.4 × 3) + (1.2 × 2)/ (0.6 + 0.4 + 1.2)] = 2/ 2.18 = 0.917

(b). When the value for the critical extent of reaction is 0.866, then the number of moles of glycerol and the number of moles of di-carboxylic acid is the same. But, in this case the number of moles of glycerol is not the same with the number of moles of di-carboxylic acid.

Answer:an element in a chemical equation is called a subscript.

Explanation:

it represents the the number of atoms of that element present in the compound. hope this helps have a great day yall

The number at the bottom right of an element in a chemical equation is called a subscript.

Subscripts represent the number of atoms of that particular element in a molecule or formula unit. They indicate the ratio of atoms or ions present in a compound. Subscripts are written in a smaller font size and appear slightly below the element's symbol.

For example:

In the chemical compound water [tex](H_2O)[/tex],the subscript '2' indicates that there are two atoms of hydrogen (H) bonded to one atom of oxygen (O). The subscript specifies the ratio of elements in the compound, indicating that there are two hydrogen atoms for every one oxygen atom in water.

Therefore, the term subscript refers to the number on the right of an element in a chemical equation.

learn more about Subscripts here:

https://brainly.com/question/31749666

#SPJ6

Answer:

2.14 g.

Explanation:

Hello!

In this case, since the mole ratio between nitrogen and oxygen is 2:5 respectively, we realize we first need the moles of nitrogen given it's atomic mass (14.01 g/mol):

[tex]n_N=0.750g*\frac{1mol}{14.01g}=0.0535molN[/tex]

Now, we calculate the moles of oxygen:

[tex]n_O=0.0535molO*\frac{5molO}{2molN}=0.134molO[/tex]

Then, we compute the moles of oxygen given its atomic mass (16.00 g/mol):

[tex]m_O=0.134molO*\frac{16.00gO}{1molO_2} \\\\m_O=2.14gO[/tex]

Best regards!

Answer:

V = 150 mL

Explanation:

Hello!

In this case, since the molarity of a solution is computed via:

[tex]M=\frac{n}{V}[/tex]

Whereas we are asked to compute the volume:

[tex]V=\frac{n}{M}[/tex]

Thus, we first compute the moles in 12.0 g of NaOH as its molar mass is about 40.0 g/mol:

[tex]n=\frac{12.0g}{40.0g/mol}=0.3mol[/tex]

Thus, at first instance, the volume liters is:

[tex]V=\frac{0.3mol}{2.0mol/L} \\\\V=0.15L[/tex]

Which in milliliters is:

[tex]V=0.15L*\frac{1000mL}{1L}\\\\V=150mL[/tex]

Best regards!

Answer:

0.0977M is the concentration of the final solution

Explanation:

In a dilution process, to the original solution (Stock solution) you add more solvent in order to decrease its original concentration. To know how many times the solution was diluted you must find the dilution factor (Ratio between the initial and final volume). That is:

Intial Volume: 5.73mL

Final volume: 5.73mL + 20.26mL = 25.99mL

Dilution factor: 25.99mL / 5.73mL = 4.536 → 4.536 times the solution is diluted. The concentration of the diluted solution is:

0.443M / 4.536 =

The concentration of the solution is 0.099 M.

We have to use the dilution formula here;

C1V1 = C2V2

Where;

C1 = initial concentration

C2 = final concentration

V1 = initial volume

V2 = final volume

Now;

C2 = C1V1/V2

C2 =0.443 M × 5.73 mL / (5.73 mL  + 20.26 mL)

C2 = 0.099 M

Learn more about Beers law: https://brainly.com/question/7184331

Answer:

comparison microscope

Explanation:

please follow me

Answer:

A.

Explanation:

In conclusion, an electrically neutral object is an object that has a balance of protons and electrons. In contrast, a charged object has an imbalance of protons and electrons. ... The type of charge(positive or negative) is determined by whether the protons or the electrons are in excess

Dear God, the person reading this is kind and I’m proud of them . Please help them live life to the fullest and bless her in their chosen field. Now, you’re on the clock.❤❤❤ In 9 minutes something will make you happy. Please share this with 15 people you love. Remember, . If I don’t get this back I’m obviously not a close friend. Now, I have a game for you, it’s been played since 1977. Once you read this, you have to send it to 15 people. Your next 5 days will be like this: Day 1 - you will wake up to the biggest shock of your life. Day 2 - you will cross paths with an old friend you have missed. Day 3 - you will find yourself with a lot of money. Day 4 - your day will be perfect. Day 5 - the person u like the most in your life will spend lots of time with you. If you don’t forward this, your next 5 days will be the exact

Answer:

a) The mean repeat unit molar mass for PEVA is 30.72 g/mol

b) degree of polymerization of the copolymer is 1300

Explanation:

Given that;

the wt% of copolymer consist of 12.9 wt% of vinyl acetate and 87.1 wt% Ethylene.

Basis: 100 g of PEVA consist of 12.9 of vinyl acetate and 87.1g of Ethylene.

now we calculate the mole fraction of vinyl acetate Ethylene in the copolymer;

the molecular weights of vinyl acetate and ethylene are 86.09 g/mol and 28.05 g/mol respectively

so

moles of vinyl acetate = wt. of vinyl acetate / molecular weights of vinyl acetate

moles of vinyl acetate = 12.9 g / 86.09 g/mol

moles of vinyl acetate = 0.1498 mol

moles of Ethylene = wt. of Ethylene / molecular weights of Ethylene

moles of Ethylene = 87.1 g / 28.05  d/mol

moles of Ethylene  = 3.1052 mol

Total moles = 0.1498 mol + 3.1052 mol = 3.255 mol

Next we calculate the mole percent;

mole percent of vinyl acetate [tex]X_{V}[/tex] = moles of vinyl acetate / total  moles

[tex]X_{V}[/tex] = (0.1498 mol / 3.255 mol) × 100

[tex]X_{V}[/tex]  = 4.6%

mole percent of Ethylene [tex]X_{E}[/tex] = moles of Ethylene / total  moles

[tex]X_{E}[/tex]  = (3.1052 mol / 3.255 mol) × 100

[tex]X_{E}[/tex]  = 95.397% ≈ 95.4%

we know that, mean repeat unit molar mass for a sample = ∑[tex]X_{i}[/tex][tex]M_{i}[/tex]

where [tex]X_{i}[/tex] is the fraction ratio and [tex]M_{i}[/tex] is the molecular  weight

so or the PEVA

mean repeat unit molar mass M = ( [tex]X_{V}[/tex][tex]M_{V}[/tex]) + ( [tex]X_{E}[/tex][tex]M_{E}[/tex])

so we substitute

M = ( 4.6% × 86.09) + ( 95.4% × 28.05 )

M = 3.96014 + 26.7597

M = 30.72 g/mol

Therefore, The mean repeat unit molar mass for PEVA is 30.72 g/mol

b)

Degree of polymerization

[tex]DP_{n}[/tex] = [tex]\frac{M_{n} }{M}[/tex]

where [tex]M_{n}[/tex] is the number average molecular weight ( 39,870 g/mol )

so we substitute

[tex]DP_{n}[/tex] = 39,870 g/mol / 30.72 g/mol

[tex]DP_{n}[/tex]  = 1297.85 ≈ 1300   { 3 significance figure }

Therefore, degree of polymerization of the copolymer is 1300

Answer:

[tex]\lambda=10^{12}\ m[/tex]

Explanation:

Given that,

The frequency of the light, [tex]f=3\times 10^{-4}\ Hz[/tex]

We need to find the wavelength of the light.

The relation between frequency, wavelength and the speed of light is given by :

[tex]c=f\lambda\\\\\lambda=\dfrac{c}{f}\\\\\lambda=\dfrac{3\times 10^8}{3\times 10^{-4}}\\\\\lambda=10^{12}\ m[/tex]

So, the wavelength of the light is [tex]10^{12}\ m[/tex].

The wavelength of light will be "[tex]10^{12} \ m[/tex]"

Given:

By using the relation,

→ [tex]\lambda = \frac{c}{f}[/tex]

By putting the values, we get

→    [tex]= \frac{3\times 10^8}{3\times 10^{-4}}[/tex]

→    [tex]= 10^{12} \ m[/tex]

Thus the above response is right.

Learn more:

https://brainly.com/question/9860028

Explanation:

Hphphphphphphphohoohohhpph

Answer:

Human chorionic gonadotropin (HCG) injections are much safer to use with some mild side effects to treat issues of testicular atrophy. Human chorionic gonadotropin (HCG) injections would increase blood flow and enable the testes' produce testosterone, reduce the shrinkage of the testicles and it also aids in the production of sperm cells which has been initially impaired due to testicular atrophy.

Explanation:

Anabolic steroid is a drug that plays the role of testosterone.

Testicular atrophy is the shrinkage of the testicles caused by old age or infections. Once it occurs, it lowers the production of testosterone and sperm cells.

Trenbolone increases muscle building, aids lean fat deposition, reduces the production of testosterone, and could also lead to testicular atrophy.

Answer:

170.68

Explanation:

PV=nRT or 22.4L for every mole of a gas at STP

Answer:

[NaCl] = 0.31 m

Explanation:

Molality is a sort of solute's concentration, that indicates the moles of solute contained in 1kg of solvent.

In this problem:

solute → NaCl

solvent → H₂O

We need the mass of solvent in kg and we have the volume, so let's convert the volume to mass by the use of density.

1 g/mL = mass / 159 mL

(Notice we needed to convert the volume from L to mL)

159 g is the mass of water. We convert to kg

159 g . 1 kg/1000 g = 0.159 kg

We convert the mass of solute to moles → 2.89 g . 1mol/ 58.45 g = 0.049 moles of NaCl

Molality → mol/kg → 0.049 mol /0.159 kg = 0.31 m

Answer:

sorry i dont know

Explanation:

Answer:

methane on the other hand is made of one carbon atom and 4 hydrogen atoms. like water, the bonds are covalent.

Liquid methane and Liquid water are both covalent compounds, thus, they both have covalent bonds in common.

Methane is a covalent compound which exists as a gas at room temperature.

Methane is composed of four hydrogen atoms and a carbon atom linked together by covalent bonds.

Water is a covalent compound which exists as a liquid at room temperature.

Water is composed of two atoms of hydrogen and one atom of oxygen linked together by covalent bonds.

Since both liquid water and liquid methane are covalent compounds, they both have covalent bonds in common.

Therefore, liquid methane and liquid water have covalent bonds in common.

Learn more about covalent bonds at: https://brainly.com/question/1853488

Answer:Because When you're cleaning your glassware, you use water to rinse it off. If the burette is not completely dry by the time you use it, the remaining traces of water on the inside will make your titrant more dilute and thereby change its concentration.Before a burette is used, it needs to be cleaned. During the cleaning process, usually, water is introduced into the burette. Be the water clean or not, if the burette is then used without rinsing it with the solution that it is going to be filled with, the result of that analytical exercise will not be precise and accurate. The reason is that water residue in the burette would dillute the solution when it's filled in the burette which would make it impossible to determine the exact concentration of the solution moved by the burette. By rinsing and re-rinsing the burette several times with the solution it is going to be filled with, residue water from the cleaning process would be successfully removed from the burette as are other leftover substances from the cleaning process.

hope this helps have a nice night ❤️❤️❤️

Explanation:

Answer:

3 AU

Explanation:

The distance from the Earth to the Sun is known as 1 AU, or 1 Astronomical Unit. If an asteroid is three times this distance, it is 3 AU away.

Answer:

3.5 mL

Explanation:

Let us represent lauric acid with the symbol LaCOOH and the anion as LaCOO-. The reaction between the anion and H2SO4 is;

LaCOO-(aq) +  H2SO4(aq) ----->  LaCOOH(aq) + HSO4-(aq)

Number of moles of LaCOO- = 2.75 g/200 g/mol = 0.014 moles

Since the mole ratio of the reaction is 1:1, then the amount of H2SO4 required is also 0.014 moles

Then;

n = CV

n = number of moles

C= concentration

V = volume

V = n/C

V = 0.014 moles/4.0 M

V= 3.5 * 10^-3 L

V = 3.5 mL

Answer:

That would be 4.17742995 * 10^13 :)

Explanation:

Answer:

Isopropyl has the specific orientation of being attached to a central carbon atom with two CH3 molecules attached (so in IUPAC naming it can become dimethylethyl), whereas propyl is three carbons all attached in a line branching off the main carbon chain, so it's two CH2 molecules and one CH3 molecule.

Explanation:

n-propane are longer chain hydrocarbon whereas isopropane is branched hydrocarbon. Isopropyl radical is more stable than n-propyl radical.

Radicals are reaction intermediates containing one unpaired electron. They are highly reactive species . The stability of radicals depends on the structure and reaction condition.

n -propyl radical is  CH₃-CH₂-CH₂·

Isopropyl radical  is written as CH₃-CH·-CH₃

The isopropyl group contains a branch in the second carbon and its makes the central carbon with secondary structure.

The stability of tertiary radicals is greater than secondary which is greater than primary. Therefore, isopropyl radical is more stable than n -propyl radical.

Find more on isopropane:

https://brainly.com/question/28755428

#SPJ2

Answer:

B

Explanation:

All elements on both sides of the equation have the same amount of moles

Answer:

In computer science, a literal is a notation for representing a fixed value in source code.  An anonymous function is a literal for the function type. In contrast to literals, variables or constants are symbols that can take on one of a class of fixed values, the constant being constrained not to change.

Explanation:

Answer:

you have to shake the soda up

Answer:

4 g/cm³

Explanation:

Volume(V) = 60 cm³

mass (m) = 240 gm

density (d) = ?

We know density is defined as mass per unit volume so

d = m / v

= 240 / 60

= 4 g/cm³

Hope it will help

Answer:

Parasites take nutrients from another organism's body.

Explanation:

Answer:

There are no options but the answers are:

Explanation:

There are six main requirements for a typhoon to form and develop. It needs an abundance of unstable atmosphere/ vertical motion. The ocean waters must have a temperature of 26.5ºC spanning from the surface up to a depth of at least 50 meters (160 ft.) or more. Another requirement is to have too much water vapor present in air known as relative humidity. The low vertical wind shear also contributes to the formation of typhoon. It also needs an existing distance/pre-existing disturbance  for typhoon development which is 500 km (300 mi) from the equator. The Coriolis force causes the powerful wind to spin at this particular region.

If any one of these requirements were below average or minimum, a tropical cyclone would not form.

Answer: Periodic Trends

Zeff increases because the positive charge of the nucleus increases while the outermost electrons stay the same distance from the nucleus (filling the same orbital). In other words, going across a period, the outermost electrons are more tightly held. This explains the trend in atomic radius.

It refers to how strongly an atom attracts electrons from other atoms. Electronegativity is a measure of an atom's ability to draw electrons towards itself, or the ability of the nucleus to hold electrons tightly

hope this helps have a great day❤️

Explanation:

Answer:

oceanic formation is the right answer.

Explanation:

this os becoz they slide a past each other and do not rub against each other