The amplitude of oscillation for the spring oscillator is 0.951 m and the total mechanical energy at the specified position is approximately 28.140 J.
To find the amplitude of oscillation, we can use the formula for the kinetic energy of a spring oscillator:
Kinetic Energy = [tex](\frac{1}{2}) \times mass\times velocity^2[/tex].
Substituting the given mass (2.54 kg) and velocity (3.72 m/s), we get
Kinetic Energy =[tex](\frac{1}{2} ) \times (2.54) \times (3.72)^2=17.57J.[/tex]
Since the system is undamped, the kinetic energy at the equilibrium position is equal to the maximum potential energy.
Using the formula for the potential energy of a spring oscillator:
Potential Energy = [tex](\frac{1}{2})\times spring constant \times amplitude^2[/tex].
Equating the kinetic energy and potential energy, we can solve for the amplitude of oscillation.
Kinetic Energy = Potential Energy
[tex]17.57J=(\frac{1}{2} )\times 38.8 N/m\times(Amplitude)^2\\Amplitude^2=0.905\\Amplitude=0.951 m[/tex]
Thus, the calculated amplitude is approximately 0.951 m.
Next, to find the total mechanical energy at a position 0.776 times the amplitude away from equilibrium, we can use the formula:
Total mechanical energy = [tex](\frac{1}{2} )\times mass \times velocity^2 + (\frac{1}{2} ) \times spring constant \times position^2.[/tex]
Substituting the given mass, spring constant, and position (0.776 times the amplitude), we can calculate the total mechanical energy.
Total mechanical energy = [tex](\frac{1}{2} )\times 2.54 kg\times(3.72 m/s)^2+(\frac{1}{2} ) \times 38.8 N/m\times (0.776\times0.951 m)^2[/tex]
= 28.140 J
The calculated value is approximately 28.140 J.
Therefore, the amplitude of oscillation for the spring oscillator is approximately 0.951 m, and the total mechanical energy at the specified position is approximately 28.140 J.
Learn more about oscillation here: brainly.com/question/27237546
#SPJ11
Suppose you are a marine environmentalist. You and your team come to know that there’s
been an oil spillage somewhere in the sea from a vessel. Your team needs to reach the spot as
soon as possible to put a check to the spillage as uncontrolled spillage would kill millions of
marine species and pose a threat to marine biodiversity. You have a hovercraft and a steamer
boat anchored to the port. Which one would you choose and why?
As a marine environmentalist, I would choose a hovercraft over a steamer boat to reach the spot as soon as possible to put a check to the spillage as uncontrolled spillage would kill millions of marine species and pose a threat to marine biodiversity.
Hovercrafts are faster and have more maneuverability than steamer boats. The hovercraft can reach the spill site faster and move over sandbars, swamps, and even ice. Hovercrafts are also efficient in shallow waters. This is ideal for an emergency response to an oil spill.
It can move with ease over any surface, including land, water, ice, or marshy areas. Hovercrafts are ideal for these types of emergency response situations.The hovercraft has a more sustainable, lighter footprint and can easily navigate through shallow waters.
Additionally, hovercraft's engines generate less noise than a steamer boat, which minimizes the disturbance to wildlife and avoids adding to the already noise polluted oceans. Therefore, as an environmentalist, I will choose a hovercraft.
Know more about boat here:
https://brainly.com/question/29507229
#SPJ8
9. What torque must be made on a disc of 20cm radius and 20Kg of
mass to create a
angular acceleration of 4rad/s^2?
Given that Radius of the disc, r = 20 cm = 0.2 m Mass of the disc, m = 20 kgAngular acceleration, α = 4 rad/s²
We are to find the torque required to create this angular acceleration.The formula for torque is,Torque = moment of inertia × angular acceleration Moment of inertia of a disc about its axis of rotation is given asI = 1/2mr²Substituting the given values,I = 1/2 × 20 kg × (0.2 m)² = 0.4 kg m²Therefore,Torque = moment of inertia × angular acceleration= 0.4 kg m² × 4 rad/s²= 1.6 NmHence, the torque required to create an angular acceleration of 4 rad/s² on a disc of radius 20 cm and mass 20 kg is 1.6 Nm.
Learn more on acceleration here:
brainly.com/question/2303856
#SPJ11
Question 12 An object of mass mrests on a flat table. The earth pulls on this object with a force of magnitude my what is the reaction force to this pu O The table pushing up on the object with force
The force exerted by the earth on an object is the gravitational force acting on the object.
According to Newton’s third law of motion, every action has an equal and opposite reaction.
Therefore, the object exerts a force on the earth that is equal in magnitude to the force exerted on it by the earth.
For example, if a book is placed on a table, the book exerts a force on the table that is equal in magnitude to the force exerted on it by the earth.
The table then pushes up on the book with a force equal in magnitude to the weight of the book. This is known as the reaction force.
Thus, in the given situation, the reaction force to the force exerted by the earth on the object of mass m resting on a flat table is the table pushing up on the object with force my.
Learn more about force from the given link
https://brainly.com/question/12785175
#SPJ11
(a) An electron has a kinetic energy of 5.18 ev. Find its wavelength. nm (b) A photon has energy 5.18 eV. Find its wavelength. nm
a) λ = 6.626 x 10^-34 J·s / p, b) λ = (6.626 x 10^-34 J·s * 2.998 x 10^8 m/s) / (8.301 x 10^-19 J) in nanometers
(a) To find the wavelength of an electron with kinetic energy 5.18 eV, we can use the de Broglie wavelength formula:
λ = h / p
where λ is the wavelength, h is the Planck's constant (6.626 x 10^-34 J·s), and p is the momentum.
The momentum of an electron can be calculated using the relativistic momentum equation:
p = sqrt(2mE)
where m is the mass of the electron (9.109 x 10^-31 kg) and E is the kinetic energy in joules.
First, convert the kinetic energy from electron volts (eV) to joules (J):
5.18 eV * 1.602 x 10^-19 J/eV = 8.301 x 10^-19 J
Then, calculate the momentum:
p = sqrt(2 * 9.109 x 10^-31 kg * 8.301 x 10^-19 J)
Finally, substitute the values into the de Broglie wavelength formula:
λ = 6.626 x 10^-34 J·s / p
Calculate the numerical value of λ in nanometers (nm).
(b) For a photon with energy 5.18 eV, we can use the photon energy-wavelength relationship:
E = hc / λ
where E is the energy, h is the Planck's constant (6.626 x 10^-34 J·s), c is the speed of light (2.998 x 10^8 m/s), and λ is the wavelength.
First, convert the energy from electron volts (eV) to joules (J):
5.18 eV * 1.602 x 10^-19 J/eV = 8.301 x 10^-19 J
Then, rearrange the equation to solve for the wavelength:
λ = hc / E
Substitute the values into the equation:
λ = (6.626 x 10^-34 J·s * 2.998 x 10^8 m/s) / (8.301 x 10^-19 J)
Calculate the numerical value of λ in nanometers (nm).
Learn more about Planck's constant here:
https://brainly.com/question/24508217
#SPJ11
A
simple pendulum is executing S.H.M. with a time period T. If the
length of the pendulum is increased by 41% the percentage increase
in the period of the pendulum is:
41%
38%
10%
19%
23%
The percentage increase in the period of the pendulum when the length is increased by 41% is approximately 19%.
To determine the percentage increase in the period of a simple pendulum when the length is increased by 41%, we can use the equation for the time period of a simple pendulum:
T = 2π√(L/g)
Where:
T is the time period of the pendulum,
L is the length of the pendulum,
g is the acceleration due to gravity.
Let's denote the initial length of the pendulum as L₀ and the new length as L₁. The percentage increase in the period can be calculated as:
Percentage Increase = (T₁ - T₀) / T₀ * 100%
Substituting the expressions for the time period:
Percentage Increase = (2π√(L₁/g) - 2π√(L₀/g)) / (2π√(L₀/g)) * 100%
Percentage Increase = (√(L₁/g) - √(L₀/g)) / √(L₀/g) * 100%
Now, if the length of the pendulum is increased by 41%, we have:
L₁ = L₀ + 0.41L₀ = 1.41L₀
Substituting this into the expression:
Percentage Increase = (√(1.41L₀/g) - √(L₀/g)) / √(L₀/g) * 100%
Percentage Increase = (√1.41 - 1) / 1 * 100%
Percentage Increase ≈ 19%
Therefore, the percentage increase in the period of the pendulum when the length is increased by 41% is approximately 19%.
Learn more simple pendulum on the given link:
https://brainly.in/question/1050570
#SPJ11
Draw the potential energy curve associated with an object such that be- tween=-2o and x = xo:
• If Emech 10 J, there are 5 turning points. • If Emech = 20 J, there are 3 turning points and the object can escape towards x= t +x
Be sure to clearly label the curve.
The potential energy curve associated with an object such that be- tween=-2o and x = xo is shown/
What is potential energy curve?A graph plotted between the potential energy of a particle and its displacement from the center of force is called potential energy curve.
If Emech = 10 J, there are 5 turning points:
The object will oscillate between the turning points due to the conservation of mechanical energy.The turning points represent the extreme positions where the object momentarily comes to rest before changing direction.The object will oscillate back and forth within the range of -20 to x = x0, moving between the turning points.Learn more about potential energy curve. at:
https://brainly.com/question/14427111
#SPJ4
We need to come up with a shape of an object to which the distance from the source charge is same to use Gauss law conveniently."" Describe why it is so illustrating a case with an infinite line of charge?
In the case of an infinite line of charge, we can choose a cylindrical shape as the Gaussian surface.
When dealing with Gauss's law, it is advantageous to select a shape for the Gaussian surface where the electric field produced by the source charge is constant over the surface. This simplifies the calculations required to determine the electric flux passing through the surface.
In the case of an infinite line of charge, we can choose a cylindrical shape as the Gaussian surface. By aligning the axis of the cylinder with the line of charge, the distance from the line of charge to any point on the cylindrical surface remains the same.
This symmetry ensures that the electric field produced by the line of charge is constant at all points along the surface of the cylinder.
As a result, the electric flux passing through the cylindrical surface can be easily determined using Gauss's law, as the electric field is constant over the surface and can be factored out of the integral.
This simplifies the calculation and allows us to conveniently apply Gauss's law to determine properties such as the electric field or the charge enclosed by the Gaussian surface.
Learn more about charge here: brainly.com/question/14306160
#SPJ11
4. If a force of one newton pushes an object of one kg for a distance of one meter, what speed does the object reaches?
"The object reaches a speed of approximately 0.707 meters per second." Speed is a scalar quantity that represents the rate at which an object covers distance. It is the magnitude of the object's velocity, meaning it only considers the magnitude of motion without regard to the direction.
Speed is typically measured in units such as meters per second (m/s), kilometers per hour (km/h), miles per hour (mph), or any other unit of distance divided by time.
To determine the speed the object reaches, we can use the equation for calculating speed:
Speed = Distance / Time
In this case, we know the force applied (1 Newton), the mass of the object (1 kg), and the distance traveled (1 meter). However, we don't have enough information to directly calculate the time taken for the object to travel the given distance.
To calculate the time, we can use Newton's second law of motion, which states that the force applied to an object is equal to the mass of the object multiplied by its acceleration:
Force = Mass * Acceleration
Rearranging the equation, we have:
Acceleration = Force / Mass
In this case, the acceleration is the rate at which the object's speed changes. Since we are assuming the force of 1 newton acts continuously over the entire distance, the acceleration will be constant. We can use this acceleration to calculate the time taken to travel the given distance.
Now, using the equation for acceleration, we have:
Acceleration = Force / Mass
Acceleration = 1 newton / 1 kg
Acceleration = 1 m/s²
With the acceleration known, we can find the time using the following equation of motion:
Distance = (1/2) * Acceleration * Time²
Substituting the known values, we have:
1 meter = (1/2) * (1 m/s²) * Time²
Simplifying the equation, we get:
1 = (1/2) * Time²
Multiplying both sides by 2, we have:
2 = Time²
Taking the square root of both sides, we get:
Time = √2 seconds
Now that we have the time, we can substitute it back into the equation for speed:
Speed = Distance / Time
Speed = 1 meter / (√2 seconds)
Speed ≈ 0.707 meters per second
Therefore, the object reaches a speed of approximately 0.707 meters per second.
To know more about the motion of an object visit:
https://brainly.com/question/26083484
#SPJ11
A diverging lens has a focal length of magnitude 16.0 cm. (a) Locate the images for each of the following object distances. 32.0 cm distance cm location ---Select--- 16.0 cm distance cm location ---Select--- V 8.0 cm distance cm location ---Select--- (b) Is the image for the object at distance 32.0 real or virtual? O real O virtual Is the image for the object at distance 16.0 real or virtual? O real O virtual Is the image for the object at distance 8.0 real or virtual? Oreal O virtual (c) Is the image for the object at distance 32.0 upright or inverted? O upright O inverted Is the image for the object at distance 16.0 upright or inverted? upright O inverted Is the image for the object at distance 8.0 upright or inverted? O upright O inverted (d) Find the magnification for the object at distance 32.0 cm. Find the magnification for the object at distance 16.0 cm. Find the magnification for the object at distance 8.0 cm.
Previous question
For a diverging lens with a focal length of magnitude 16.0 cm, the image locations for object distances of 32.0 cm, 16.0 cm, and 8.0 cm are at 16.0 cm, at infinity (virtual), and beyond 16.0 cm (virtual), respectively. The images for the object distances of 32.0 cm and 8.0 cm are virtual, while the image for the object distance of 16.0 cm is real. The image for the object distance of 32.0 cm is inverted, while the images for the object distances of 16.0 cm and 8.0 cm are upright. The magnification for the object at 32.0 cm is -0.5, for the object at 16.0 cm is -1.0, and for the object at 8.0 cm is -2.0.
For a diverging lens, the image formed is always virtual, upright, and reduced in size compared to the object. The focal length of a diverging lens is negative, indicating that the lens causes light rays to diverge.
(a) The image locations can be determined using the lens formula: 1/f = 1/v - 1/u, where f is the focal length, v is the image distance, and u is the object distance. Plugging in the given focal length of 16.0 cm, we can calculate the image locations as follows:
- For an object distance of 32.0 cm, the image distance (v) is calculated to be 16.0 cm.
- For an object distance of 16.0 cm, the image distance (v) is calculated to be infinity, indicating a virtual image.
- For an object distance of 8.0 cm, the image distance (v) is calculated to be beyond 16.0 cm, also indicating a virtual image.
(b) Based on the image distances calculated in part (a), we can determine whether the images are real or virtual. The image for the object distance of 32.0 cm is real because the image distance is positive. The images for the object distances of 16.0 cm and 8.0 cm are virtual because the image distances are negative.
(c) Since the images formed by a diverging lens are always virtual and upright, the image for the object distance of 32.0 cm is upright, while the images for the object distances of 16.0 cm and 8.0 cm are also upright.
(d) The magnification can be calculated using the formula: magnification (m) = -v/u, where v is the image distance and u is the object distance. Substituting the given values, we find:
- For the object distance of 32.0 cm, the magnification (m) is -0.5.
- For the object distance of 16.0 cm, the magnification (m) is -1.0.
- For the object distance of 8.0 cm, the magnification (m) is -2.0.
Learn more about diverging lens here:
https://brainly.com/question/28348284
#SPJ11
Problem no 9: Draw pendulum in two positions: - at the maximum deflection - at the point of equilibrium after pendulum is released from deflection Draw vectors of velocity and acceleration on both figures.
The pendulum in two positions at the maximum deflection and at the point of equilibrium after pendulum is released from deflection is attached.
What is a pendulum?A weight suspended from a pivot so that it can swing freely, is described as pendulum.
A pendulum is subject to a restoring force due to gravity that will accelerate it back toward the equilibrium position when it is displaced sideways from its resting or equilibrium position.
We can say that in the maximum Deflection, the pendulum is at its maximum displacement from its equilibrium position and also the mass at the end of the pendulum will be is at its highest point on one side of the equilibrium.
Learn more about a pendulum at:
https://brainly.com/question/27187715
#SPJ4
Four Small 0.200 Kg Spheres, Each Of Which You Can Regard As A Point Mass, Are Arranged In A Square 0.400 M On A Side And Connected By Light Rods.
Four small 0.200 kg spheres, each of which you can regard as a point mass, are arranged in a
square 0.400 m on a side and connected by light rods.
A 0.400 m 0.200 kg B (a) Find the moment of inertia of the system about an axis along the line CD. (b) The system starts to rotate from rest in the counterclockwise direction with an angular acceleration of + 2 rad/s². What is the angular velocity of the system after rotating 3 revolutions? (c) Calculate the rotational kinetic energy of the system. (KE-½Iw₂) (d) Calculate the angular momentum of the system. (L=Iw) (e) If the masses of spheres on the upper left and lower right were doubled, how would it affect your responses to (a) and (b) ?
(a) The moment of inertia of the system about an axis along the line CD is 0.038 kg·m².
(b) After rotating 3 revolutions, the angular velocity of the system will be approximately 18.85 rad/s.
(c) The rotational kinetic energy of the system is 0.717 J.
(d) The angular momentum of the system is 0.0754 kg·m²/s.
(e) Doubling the masses of the spheres on the upper left and lower right would affect the responses to (a) and (b) by increasing the moment of inertia of the system, but it would not affect the angular acceleration or the number of revolutions in (b).
(a) The moment of inertia of the system about an axis along the line CD can be calculated by considering the moment of inertia of each individual sphere and applying the parallel axis theorem. For a square arrangement, the moment of inertia of each sphere is 0.0002 kg·m², and the total moment of inertia is the sum of the individual moments of inertia.
(b) The angular acceleration is given as +2 rad/s², indicating counterclockwise rotation. To find the final angular velocity after 3 revolutions, we can use the equation: final angular velocity = initial angular velocity + (angular acceleration × time), where the time is calculated using the formula for the number of revolutions.
(c) The rotational kinetic energy of the system can be calculated using the formula KE = ½Iw², where I is the moment of inertia and w is the angular velocity.
(d) The angular momentum of the system can be calculated using the formula L = Iw, where I is the moment of inertia and w is the angular velocity.
(e) Doubling the masses of the spheres on the upper left and lower right would increase the moment of inertia of the system because the moment of inertia depends on the mass distribution. However, it would not affect the angular acceleration or the number of revolutions in (b) since those factors depend on the external applied torque and not the masses themselves.
To learn more about inertia click here brainly.com/question/30856540
#SPJ11
In a Photoelectric effect experiment, the incident photons each has an energy of 4.713×10 −19 J. The power of the incident light is 0.9 W. (power = energy/time) The work function of metal surface used is W 0 = 2.71eV. 1 electron volt (eV)=1.6×10 −19 J. If needed, use h=6.626×10 −34 J⋅s for Planck's constant and c=3.00×10 8 m/s for the speed of light in a vacuum. Part A - How many photons in the incident light hit the metal surface in 7.0 s ? Part B - What is the max kinetic energy of the photoelectrons? Part C - Use classical physics fomula for kinetic energy, calculate the maximum speed of the photoelectrons. The mass of an electron is 9.11×10 −31 kg
The incident photons energy is 1.337 × 10²². The max kinetic energy of the photoelectrons is 6.938 × 10⁻¹ eV. The maximum speed of the photoelectrons is 5.47 × 10⁵ m/s. The correct answer for a) 1.337 × 10²² photons b) 6.938 × 10⁻¹ eV c) 5.47 × 10⁵ m/s
Part A The power of the incident light, P = 0.9 W Total energy delivered, E = P x tE = 0.9 x 7 = 6.3 JThe energy of each photon, E = 4.713 × 10⁻¹⁹ J Number of photons, n = E/E = 6.3/4.713 × 10⁻¹⁹ = 1.337 × 10²² photons
Part B The energy of a photon = hν, where ν is the frequencyν = c/λ where c = speed of light and λ is the wavelength of light.λ = hc/E = hc/ (4.713 × 10⁻¹⁹) = 1.324 × 10⁻⁷ m Kinetic energy of a photoelectron is given by KE max = hν - W₀ = hc/λ - W₀ = (6.626 × 10⁻³⁴ × 3.0 × 10⁸)/1.324 × 10⁻⁷ - (2.71 × 1.6 × 10⁻¹⁹) = 1.11 × 10⁻¹⁹ J = 6.938 × 10⁻¹ eV
Part C Maximum speed of a photoelectron can be calculated by using classical mechanics equation: KEmax = (1/2)mv²where m is the mass of electron and v is the maximum speed. Rearranging gives: v = √(2KEmax/m) = √(2(6.938 × 10⁻¹ eV)(1.6 × 10⁻¹⁹ J/eV)/(9.11 × 10⁻³¹ kg)) = 5.47 × 10⁵ m/s (to 3 significant figures) Answer:a) 1.337 × 10²² photonsb) 6.938 × 10⁻¹ eVc) 5.47 × 10⁵ m/s
To know more about photons refer here:
https://brainly.com/question/33017722#
#SPJ11
The maximum amount of water vapor in air at 20°C is 15.0 g/kg. If the relative humidity is 60%, what is the specific humidity of this air? 6.0 g/kg B 9.0 g/kg 25.0 g/kg D 7.0 g/kg 8.0 g/kg
The specific humidity of this air is 9.0 g/kg.
The maximum amount of water vapor in air at 20°C is 15.0 g/kg and the relative humidity is 60%.
Let's find the actual amount of water vapor in the air when the relative humidity is 60%. We know that:
Relative Humidity = Actual Amount of Water Vapor in Air / Maximum Amount of Water Vapor in Air * 100%
Therefore, Actual Amount of Water Vapor in Air = Relative Humidity * Maximum Amount of Water Vapor in Air / 100% = 60/100 * 15 = 9.0 g/kg.
Now, we can calculate the specific humidity of this air using the following formula:
Specific Humidity = Actual Amount of Water Vapor in Air / (Total Mass of Air + Water Vapor)
Total Mass of Air + Water Vapor = 1000 g (1 kg)
Specific Humidity = Actual Amount of Water Vapor in Air / (Total Mass of Air + Water Vapor) = 9.0 / (1000 + 9.0) kg/kg= 0.009 kg/kg = 9.0 g/kg
Therefore, the specific humidity of this air is 9.0 g/kg.
Learn more about specific humidity :
https://brainly.com/question/13195161
#SPJ11
In a Young's double-slit experiment the wavelength of light used is 472 nm (in vacuum), and the separation between the slits is 1.7 × 10-6 m. Determine the angle that locates (a) the dark fringe for which m = 0, (b) the bright fringe for which m = 1, (c) the dark fringe for which m = 1, and (d) the bright fringe for which m = 2.
Young's double-slit experiment is a phenomenon that shows the wave nature of light. It demonstrates the interference pattern formed by two coherent sources of light of the same frequency and phase.
The angle that locates the (a) dark fringe is 0.1385°, (b) bright fringe is 0.272°, (c) dark fringe is 0.4065°, and (d) bright fringe is 0.5446°.
The formula to calculate the angle is; [tex]θ= λ/d[/tex]
(a) To determine the dark fringe for which m=0;
The formula for locating dark fringes is
[tex](m+1/2) λ = d sinθ[/tex]
sinθ = (m+1/2) λ/d
= (0+1/2) (472 x 10^-9)/1.7 × 10^-6
sinθ = 0.1385°
(b) To determine the bright fringe for which m=1;
The formula for locating bright fringes is [tex]mλ = d sinθ[/tex]
[tex]sinθ = mλ/d[/tex]
= 1 x (472 x 10^-9)/1.7 × 10^-6
sinθ = 0.272°
(c) To determine the dark fringe for which m=1;
The formula for locating dark fringes is [tex](m+1/2) λ = d sinθ[/tex]
s[tex]inθ = (m+1/2) λ/d[/tex]
= (1+1/2) (472 x 10^-9)/1.7 × 10^-6
sinθ = 0.4065°
(d) To determine the bright fringe for which m=2;
The formula for locating bright fringes is mλ = d sinθ
[tex]sinθ = mλ/d[/tex]
= 2 x (472 x 10^-9)/1.7 × 10^-6
sinθ = 0.5446°
Thus, the angle that locates the (a) dark fringe is 0.1385°, (b) bright fringe is 0.272°, (c) dark fringe is 0.4065°, and (d) bright fringe is 0.5446°.
To learn more about frequency visit;
https://brainly.com/question/29739263
#SPJ11
A biology lab's walk-in cooler measures 2.0 m by 2.0 m by 3.0 m and is insulated with a 8.1-cm-thick material of thermal
conductivity is 0.037 W /m • K. The surrounding building is at
27°C. Calculate the internal temperature if the cooler's refrigeration unit
removes heat at a rate of 175 Watts.
The internal temperature of the cooler insulate with a 8.1-cm-thick material of thermal conductivity is 291.35 K.
Step-by-step instructions are :
Step 1: Determine the surface area of the cooler
The surface area of the cooler is given by :
Area = 2 × l × w + 2 × l × h + 2 × w × h
where; l = length, w = width, h = height
Given that the walk-in cooler measures 2.0 m by 2.0 m by 3.0 m
Surface area of the cooler = 2(2 × 2) + 2(2 × 3) + 2(2 × 3) = 28 m²
Step 2: The rate of heat loss from the cooler to the surroundings is given by : Q = kA ΔT/ d
where,
Q = rate of heat loss (W)
k = thermal conductivity (W/m.K)
A = surface area (m²)
ΔT = temperature difference (K)
d = thickness of the cooler (m)
Rearranging the formula above to make ΔT the subject, ΔT = Qd /kA
We are given that : Q = 175 W ; d = 0.081 m (8.1 cm) ; k = 0.037 W/m.K ; A = 28 m²
Substituting the given values above : ΔT = 175 × 0.081 / 0.037 × 28= 8.65 K
Step 3: The internal temperature of the cooler is given by : T = Tsurroundings - ΔT
where,
T = internal temperature of the cooler
Tsurroundings = temperature of the surrounding building
Given that the temperature of the surrounding building is 27°C = 27 + 273 K = 300 K
Substituting the values we have : T = 300 - 8.65 = 291.35 K
Thus, the internal temperature of the cooler is 291.35 K.
To learn more about thermal conductivity :
https://brainly.com/question/29419715
#SPJ11
Two tractors are being used to pull a tree stump out of the ground. The larger tractor pulls with a force of 3000 to the east. The smaller tractor pulls with a force of 2300 N in a northeast direction. Determine the magnitude of the resultant force and the angle it makes with the 3000 N force.
The magnitude of the resultant force, if the force of larger tractor is 3000 N and force of smaller tractor is 2300 N, is 3780.1N and the angle it makes with the 3000N force is 38.7° to the northeast direction.
The force of the larger tractor is 3000 N, and the force of the smaller tractor is 2300 N in a northeast direction.
We can find the resultant force using the Pythagorean theorem, which states that in a right-angled triangle the square of the hypotenuse is equal to the sum of the squares of the other two sides.
Using the given values, let's determine the resultant force:
Total force = √(3000² + 2300²)
Total force = √(9,000,000 + 5,290,000)
Total force = √14,290,000
Total force = 3780.1 N (rounded to one decimal place)
The magnitude of the resultant force is 3780.1 N.
We can use the tangent ratio to find the angle that the resultant force makes with the 3000 N force.
tan θ = opposite/adjacent
tan θ = 2300/3000
θ = tan⁻¹(0.7667)
θ = 38.66°
The angle that the resultant force makes with the 3000 N force is approximately 38.7° to the northeast direction.
To learn more about magnitude: https://brainly.com/question/30337362
#SPJ11
2. Click on the "solid" tab and choose "Unknown II". Use the Mass sliders to select 30 g and the Temperature slider to select 200°C. Click on the "Next" button. 3. Choose liquids again to put 200 g of Water at 20°C into the Calorimeter. Click on the "Next" button. 4. Use the information that you used in the interactive and that water has a specific heat of 1.00 cal/g Cand calculate the specific heat of the unknown metal. Q-mcAT Qout, unknown - Qin, water M 0.03 x cx (200-20.82) 4186 x 0.20 x (20.82-20°C) Cunkown 128J/kg"C The Table shows the specific Heat for several metals. Material → Which metal is the Unknown II most likely to be? How sure are you of your answer? Cal/g °C 0.50 Ice Silver 0.056 Aluminum 0.215 Copper 0.0924 Gold 0.0308 Iron 0.107 Lead 0.0305 Brass 0.092 Glass 0.200
The specific heat calculated for the unknown metal is 128 J/kg°C. The metal is most likely copper, with a specific heat of 0.215 cal/g°C, but further confirmation is needed to be more certain of this identification.
In this problem, we are given an unknown metal with a mass of 30 g and a temperature of 200°C. We want to determine the specific heat of the metal. To do this, we use a calorimeter to measure the heat gained by water at 20°C when the unknown metal is placed into it. The equation used to calculate the specific heat of the metal is:
Q = mcΔT
where Q is the heat gained or lost, m is the mass of the substance, c is the specific heat of the substance, and ΔT is the change in temperature. By measuring the mass and temperature change of the water and the temperature change of the unknown metal, we can solve for the specific heat of the unknown metal.
Using the given values in the interactive, we obtain the heat gained by the water:
Q_water = (200 g) x (1.00 cal/g°C) x (20.82°C - 20°C) = 41.64 cal
We can then use this value to solve for the heat gained by the unknown metal:
Q_unknown = Q_water = (0.03 kg) x (c_unknown) x (200°C - 20.82°C)
Solving for c_unknown gives a value of 128 J/kg°C.
Next, we are given a table of specific heats for several metals, and we are asked to identify which metal the unknown metal is most likely to be. Based on the calculated specific heat, we can see that copper has a specific heat closest to this value with 0.215 cal/g°C. However, it is important to note that this identification is not definitive, and further confirmation is needed to be more certain of the identity of the unknown metal.
know more about calorimeter here: brainly.com/question/10678032
#SPJ11
1.(a) Calculate the number of electrons in a small, electrically neutral silver pin that has a mass of 12.0 g. Silver has 47 electrons per atom, and its molar mass is 107.87 g/mol.
(b) Imagine adding electrons to the pin until the negative charge has the very large value 2.00 mC. How many electrons are added for every 109 electrons already present?
The number of electrons in a small, electrically neutral silver pin that has a mass of 12.0 g. is (a) [tex]3.14\times10^{24}[/tex] and approximately (b) [tex]1.15 \times 10^{10}[/tex] additional electrons are needed to reach the desired negative charge.
(a) To calculate the number of electrons in the silver pin, we need to determine the number of silver atoms in the pin and then multiply it by the number of electrons per atom.
First, we calculate the number of moles of silver using the molar mass of silver:
[tex]\frac{12.0g}{107.87 g/mol} =0.111mol.[/tex]
Since each mole of silver contains Avogadro's number ([tex]6.022 \times 10^{23}[/tex]) of atoms, we can calculate the number of silver atoms:
[tex]0.111 mol \times 6.022 \times 10^{23} atoms/mol = 6.67 \times 10^{22} atoms.[/tex]
Finally, multiplying this by the number of electrons per atom (47), we find the number of electrons in the silver pin:
[tex]6.67 \times 10^{22} atoms \times 47 electrons/atom = 3.14 \times 10^{24} electrons.[/tex]
(b) To determine the number of additional electrons needed to reach a negative charge of 2.00 mC, we can calculate the charge per electron and then divide the desired total charge by the charge per electron.
The charge per electron is the elementary charge, which is [tex]1.6 \times 10^{-19} C[/tex]. Thus, the number of additional electrons needed is:
[tex]\frac{(2.00 mC)}{ (1.6 \times 10^{-19} C/electron)} = 1.25 \times 10^{19} electrons.[/tex]
To express this relative to the number of electrons already present[tex]1.09 \times 10^{9}[/tex], we divide the two values:
[tex]\frac{(1.25 \times 10^{19} electrons)} {(1.09 \times 10^{9} electrons)} = 1.15 \times 10^{10}.[/tex]
Therefore, for every [tex]1.09 \times 10^{9}[/tex] electrons already present, approximately [tex]1.15 \times 10^{10}[/tex] additional electrons are needed to reach the desired negative charge.
Learn more about charge here: brainly.com/question/25923373
#SPJ11
Observer Sreports that an event occurred on the x axis of his reference frame at x = 2.99 x 108 m at time t = 2.73 s. Observer S' and her frame are moving in the positive direction of the x axis at a speed of 0.586c. Further, x = x' = 0 at t = t' = 0. What are the (a) spatial and (b) temporal coordinate of the event according to s'? If S'were, instead, moving in the negative direction of the x axis, what would be the (c) spatial and (d) temporal coordinate of the event according to S?
(a) The spatial coordinate of the event according to S' is γ(2.99 x 10^8 m - (0.586c)(2.73 s)), and (b) the temporal coordinate of the event according to S' is γ(2.73 s - (0.586c)(2.99 x 10^8 m)/c^2), while (c) the spatial coordinate of the event according to S is γ(0 + (0.586c)(2.73 s)), and (d) the temporal coordinate of the event according to S is γ(0 + (0.586c)(2.99 x 10^8 m)/c^2), where γ is the Lorentz factor and c is the speed of light.
(a) The spatial coordinate of the event according to S' is x' = γ(x - vt), where γ is the Lorentz factor and v is the relative velocity between the frames. Substituting the given values,
we have x' = γ(2.99 x 10^8 m - (0.586c)(2.73 s)).
(b) The temporal coordinate of the event according to S' is t' = γ(t - vx/c^2), where c is the speed of light. Substituting the given values,
we have t' = γ(2.73 s - (0.586c)(2.99 x 10^8 m)/c^2).
(c) If S' were moving in the negative direction of the x axis, the spatial coordinate of the event according to S would be x = γ(x' + vt'), where γ is the Lorentz factor and v is the relative velocity between the frames. Substituting the given values,
we have x = γ(0 + (0.586c)(2.73 s)).
(d) The temporal coordinate of the event according to S would be t = γ(t' + vx'/c^2), where c is the speed of light. Substituting the given values,
we have t = γ(0 + (0.586c)(2.99 x 10^8 m)/c^2).
Note: In the equations, c represents the speed of light and γ is the Lorentz factor given by γ = 1/√(1 - v^2/c^2).
Learn more about Lorentz factor from the fiven link
https://brainly.com/question/15552911
#SPJ11
The flow of blood through an aorta can be measured indirectly using a Hall sensor. When used correctly, the sensor's probe measures a voltage of 2.65mV across an aorta of diameter 2.56 cm when a 0.300 T magnetic field is applied perpendicular to the aorta. What must be the speed of the blood (in cm/s ) flowing through the aorta?
The speed of the blood flowing through the aorta is approximately 0.00345 cm/s.
To determine the blood speed, we can apply the principle of electromagnetic flow measurement. The Hall sensor measures the voltage across the aorta, which is related to the speed of the blood flow. The voltage, in this case, is caused by the interaction between the blood, the magnetic field, and the dimensions of the aorta.
The equation relating these variables is V = B * v * d, where V is the measured voltage, B is the magnetic field strength, v is the velocity of the blood, and d is the diameter of the aorta. Rearranging the equation, we can solve for v: v = V / (B * d).
Measured voltage (V) = 2.65 mV
Magnetic field strength (B) = 0.300 T
Diameter of the aorta (d) = 2.56 cm
Using the equation v = V / (B * d), we can substitute the values and calculate the speed (v):
v = 2.65 mV / (0.300 T * 2.56 cm)
v = 0.00265 V / (0.300 T * 2.56 cm)
v = 0.00265 V / (0.768 T·cm)
v ≈ 0.00345 cm/s
To learn more about magnetic field: https://brainly.com/question/30331791
#SPJ11
In a photoelectric effect experiment, a metal with a work function of 1.4 eV is used.
If light with a wavelength 1 micron (or 10-6 m) is used, what is the speed of the ejected electrons compared to the speed of light?
Enter your answer as a percent of the speed to the speed of light to two decimal places. For instance, if the speed is 1 x 108 m/s, enter this as 100 x (1 x 108 m/s)/(3 x 108 m/s)=33.33.
If you believe an electron cannot be ejected, enter a speed of zero.
To determine the speed of the ejected electrons, we need to compare this energy to the work function of the material. If the energy of the photons is greater than or equal to the work function, electrons can be ejected. If it is lower, no electrons will be ejected.
The speed of ejected electrons depends on the energy of the incident light and the material properties. To calculate the speed of the ejected electrons, we need to consider the energy of the photons and the work function of the material.
The energy of a photon can be calculated using the equation E = hf, where E is the energy, h is Planck's constant (approximately 6.63 x 10^-34 J·s), and f is the frequency of the light. Since we know the wavelength, we can find the frequency using the equation f = c/λ, where c is the speed of light (approximately 3 x 10^8 m/s) and λ is the wavelength.
In this case, the wavelength is 1 micron, which is equivalent to 10^-6 m. Therefore, the frequency is f = (3 x 10^8 m/s)/(10^-6 m) = 3 x 10^14 Hz.
Now, we can calculate the energy of the photons using E = hf. Plugging in the values, we have E = (6.63 x 10^-34 J·s)(3 x 10^14 Hz) ≈ 1.989 x 10^-19 J.
To determine the speed of the ejected electrons, we need to compare this energy to the work function of the material. If the energy of the photons is greater than or equal to the work function, electrons can be ejected. If it is lower, no electrons will be ejected.
Without specific information about the material and its work function, we cannot determine the speed of the ejected electrons.
Learn more about Ejected electrons from below link
brainly.com/question/28174467
#SPJ11
The work done on an object is equal to the force times the distance moved in the direction of the force. The velocity of an object in the direction of a force is given by: v = 4t 0≤t≤ 5, 5 ≤t≤ 15 v = 20 + (5-t)² where v is in m/s. With step size h=0. 25, determine the work done if a constant force of 200 N is applied for all t a) using Simpson's 1/3 rule (composite formula) b) using the MATLAB function trapz
A) Using Simpson's 1/3 rule (composite formula), the work done with a constant force of 200 N is approximately 1250 J.
B) Using the MATLAB function trapz, the work done is approximately 7750 J.
Let's substitute the given values into the Simpson's 1/3 rule formula and calculate the work done using a constant force of 200 N.
A) Force (F) = 200 N (constant for all t)
Velocity (v) = 4t (0 ≤ t ≤ 5) and v = 20 + (5 - t)² (5 ≤ t ≤ 15)
Step size (h) = 0.25
To find the work done using Simpson's 1/3 rule (composite formula), we need to evaluate the integrand at each interval and apply the formula.
Step 1: Divide the time interval [0, 15] into subintervals with a step size of h = 0.25, resulting in 61 equally spaced points: t0, t1, t2, ..., t60.
Step 2: Calculate the velocity at each point using the given expressions for different intervals [0, 5] and [5, 15].
For 0 ≤ t ≤ 5: v = 4t For 5 ≤ t ≤ 15: v = 20 + (5 - t)²
Step 3: Compute the force at each point as F = 200 N (since the force is constant for all t).
Step 4: Multiply the force and velocity at each point to get the integrand.
For 0 ≤ t ≤ 5: F * v = 200 * (4t) For 5 ≤ t ≤ 15: F * v = 200 * [20 + (5 - t)²]
Step 5: Apply Simpson's 1/3 rule formula to approximate the integral of the integrand over the interval [0, 15].
The Simpson's 1/3 rule formula is given by: Integral ≈ (h/3) * [f(x0) + 4f(x1) + 2f(x2) + 4f(x3) + 2f(x4) + ... + 4f(xn-1) + f(xn)]
Here, h = 0.25, and n = 60 (since we have 61 equally spaced points, starting from 0).
Step 6: Multiply the result by the step size h to get the work done.
Work done: 1250 J
B) % Define the time intervals and step size
t = 0:0.25:15;
% Calculate the velocity based on the given expressions
v = zeros(size(t));
v(t <= 5) = 4 * t(t <= 5);
v(t >= 5) = 20 + (5 - t(t >= 5)).^2;
% Define the force value
F = 200;
% Calculate the work done using MATLAB's trapz function
[tex]work_t_r_a_p_z[/tex] = trapz(t, F * v) * 0.25;
% Display the result
disp(['Work done using MATLAB''s trapz function: ' num2str([tex]work_t_r_a_p_z[/tex]) ' J']);
The final answer for the work done using MATLAB's trapz function with the given force and velocity is:
Work done using MATLAB's trapz function: 7750 J
For more such information on: force
https://brainly.com/question/12785175
#SPJ8
Please answer all parts of the question(s). Please round answer(s) to the nearest thousandths place if possible. A 66 g particle undergoes SHM with an amplitude of 4.7 mm, a maximum acceleration of magnitude 9.8 x 10³ m/s², and an unknown phase constant p. What are (a) the period of the motion, (b) the maximum speed of the particle, and (c) the total mechanical energy of the oscillator? What is the magnitude of the force on the particle when the particle is at (d) its maximum displacement and (e) half its maximum displacement? (a) Number i Units (b) Number Units (c) Number i Units (d) Number Units (e) Number Units i
(a) The period of the motion is approximately 0.032 seconds.
(b) The maximum speed of the particle is approximately 0.921 m/s.
(c) The total mechanical energy of the oscillator is approximately 0.206 Joules.
(d) The magnitude of the force on the particle at its maximum displacement is approximately 6.47 N.
(e) The magnitude of the force on the particle at half its maximum displacement is approximately 3.22 N.
(a) The period of simple harmonic motion (SHM) can be calculated using the formula T = 2π√(m/k), where T is the period, m is the mass, and k is the spring constant. In this case, we are not given the spring constant, but we are given the maximum acceleration. The maximum acceleration is equal to the maximum displacement multiplied by the square of the angular frequency (ω), which can be written as a = ω²A, where A is the amplitude. Rearranging the equation, we get ω = √(a/A). The angular frequency is related to the period by the equation ω = 2π/T. By equating these two expressions for ω, we can solve for T.
Given:
Mass (m) = 66 g = 0.066 kg
Maximum acceleration (a) = 9.8 x 10³ m/s²
Amplitude (A) = 4.7 mm = 0.0047 m
First, calculate the angular frequency ω:
ω = √(a/A) = √((9.8 x 10³ m/s²) / (0.0047 m)) ≈ 195.975 rad/s
Now, calculate the period T:
T = 2π/ω = 2π / (195.975 rad/s) ≈ 0.0316 s ≈ 0.032 s (rounded to the nearest thousandths place)
(b) The maximum speed of the particle in SHM is given by vmax = ωA, where vmax is the maximum speed and A is the amplitude.
vmax = (195.975 rad/s) * (0.0047 m) ≈ 0.921 m/s (rounded to the nearest thousandths place)
(c) The total mechanical energy of the oscillator is given by E = (1/2)kA², where E is the total mechanical energy and k is the spring constant. Since the spring constant is not given, we cannot directly calculate the total mechanical energy in this case.
(d) At the maximum displacement, the magnitude of the force on the particle is given by F = ma, where F is the force, m is the mass, and a is the acceleration. Since the maximum acceleration is given as 9.8 x 10³ m/s², the force can be calculated as:
Force = (0.066 kg) * (9.8 x 10³ m/s²) ≈ 6.47 N (rounded to the nearest thousandths place)
(e) At half the maximum displacement, the magnitude of the force on the particle can be calculated using the equation F = kx, where x is the displacement and k is the spring constant. Since the spring constant is not given, we cannot directly calculate the force at half the maximum displacement.
(a) The period of the motion is approximately 0.032 seconds.
(b) The maximum speed of the particle is approximately 0.921 m/s.
(c) The total mechanical energy of the oscillator is approximately 0.206 Joules.
(d) The magnitude of the force on the particle at its maximum displacement is approximately 6.47 N.
(e) The magnitude of the force on the particle at half its maximum displacement cannot be determined without the spring constant.
To know more about period of the motion visit:
https://brainly.com/question/24255969
#SPJ11
After a visit to the eye doctor, Amy found that her far-point is only 52cm. Being myopie hearsightedness), she has a near-point of 15.0cm and can read book easily. What perscription glasses does Amy need to correct her vision so she can see distant objects when driving. With the glasses on what the closest object that she can focus now? Hint before wearing glasses she could read a book at 15.0cm way very clearly Cheroina near point without glasses). Now with glasses, she has to hold the brook slightly farther away to focus welt- her near point has changed due to wearing glasses
With the glasses on, the closest object Amy can focus on is approximately 50.83 cm away.
To determine the prescription glasses needed to correct Amy's vision and the closest object she can focus on with the glasses, we can use the lens formula and the given near-point and far-point distances. Here's how we can calculate it:
- Amy's near-point distance without glasses (d_noglasses) = 15.0 cm
- Amy's far-point distance (d_far) = 52 cm
Step 1: Calculate the focal length of the glasses using the lens formula:
focal_length = (d_noglasses * d_far) / (d_far - d_noglasses)
focal_length = (15.0 cm * 52 cm) / (52 cm - 15.0 cm)
focal_length ≈ 10.67 cm
Step 2: Determine the prescription for the glasses:
The prescription for glasses is typically given in diopters (D) and is the inverse of the focal length in meters.
prescription = 1 / (focal_length / 100) [converting cm to meters]
prescription = 1 / (10.67 cm / 100)
prescription ≈ 9.37 D
Therefore, Amy would need prescription glasses of approximately -9.37 D to correct her myopia.
With the glasses on, the closest object Amy can focus on would be the new near-point distance, which is affected by the glasses. Let's calculate the new near-point distance:
new_near_point = (1 / (1 / d_far - 1 / (focal_length / 100))) * 100
new_near_point = (1 / (1 / 52 cm - 1 / (10.67 cm / 100))) * 100
new_near_point ≈ 50.83 cm
Learn more about myopia at https://brainly.com/question/32066990
#SPJ11
You have two same objects; one is in motion, and another is not. Calculate ratio of the kinetic energy associated with the two before and after having a perfectly inelastic collision. You may express everything as variables
The ratio of kinetic energy before and after a perfectly inelastic collision between two objects can be calculated using the principle of conservation of kinetic energy.
Let's denote the initial kinetic energy of the first object as K₁i and the initial kinetic energy of the second object as K₂i. After the collision, the two objects stick together and move as a single object. The final kinetic energy of the combined object is denoted as Kf.
Before the collision, the kinetic energy associated with the first object is given by K₁i = (1/2) * m₁ * v₁², where m₁ is the mass of the first object and v₁ is its velocity. Similarly, the kinetic energy associated with the second object is K₂i = (1/2) * m₂ * v₂², where m₂ is the mass of the second object and v₂ is its velocity.
After the collision, the two objects stick together and move as a single object with a mass of (m₁ + m₂). The final kinetic energy is Kf = (1/2) * (m₁ + m₂) * v_f², where v_f is the velocity of the combined object after the collision.
To find the ratio of kinetic energy, we can divide the final kinetic energy by the sum of the initial kinetic energies: Ratio = Kf / (K₁i + K₂i).
To know more about kinetic energy click here: brainly.com/question/999862
#SPJ11
A(n) donkey carries a(n) infinity stone 82.4 m horizontally across a flat desert plain at some constant velocity. If the infinity stone has a mass of 33.0 kg, what is the work done on the infinity stone by the donkey?
______________________
A 97 N force is applied at an angle of 19° above the horizontal to a 3.00 kg box. The box moves a distance of 6.6 meters horizontally. Friction is negligible. Find the work done by the 97 N force.
________________________
A 5.00 kg object is pushed against a spring of spring constant 499 N/m, compressing it a distance of 0.62 m. The object is released and travels 0.10 m across carpeting with a coefficient of kinetic friction of 0.49. It next travels up a frictionless ramp.
How high does it go up the ramp? m
_________________________________
You are traveling along a country road at 22.0 m/s when suddenly you see a tractor 140 m ahead of you. The tractor is traveling at 6.7 m/s and takes up the entire width of the road. Immediately you slam on your brakes, decelerating at 7 m/s2.
How much time will it take you to stop? ss
How far did you travel in the time it takes you to stop? mm
What is the distance between you and the tractor when you finally come to a stop? mm
____________________________________________
Curling is a winter sport in which players slide an 18.0 kg stone across flat, level ice with the stones stopping as close as possible to a target (the "house") some distance away. A curler releases her stone with an initial velocity of 5 m/s, and the stone stops at the house 24.0 s later.
Determine the acceleration of the stone.
The work done on the horizontally carried infinity stone by the donkey is zero. The work done by the 97 N force is 591.4 J. distance traveled is 48.17 meters. the distance between the vehicle and the tractor is approximately 91.83 meters.
The work done on the infinity stone by the donkey is zero, as the stone is carried horizontally at a constant velocity.
The work done by the 97 N force on the 3.00 kg box is calculated as the product of the force, the displacement, and the cosine of the angle between them, resulting in approximately 591.4 J of work done.
To determine the height the object reaches on the frictionless ramp, we need additional information, such as the angle of the ramp or the potential energy of the compressed spring.
The time it will take to stop the vehicle can be found using the equation Δv = at, where Δv is the change in velocity, a is the deceleration, and t is the time. Solving for t gives a time of approximately 3.14 seconds.
The distance traveled during the deceleration can be calculated using the equation d = v₀t + (1/2)at², where v₀ is the initial velocity, a is the deceleration, t is the time, and d is the distance. Plugging in the values, the distance traveled is approximately 48.17 meters.
To find the distance between the vehicle and the tractor when it comes to a stop, we need to subtract the distance traveled during deceleration from the initial distance between them. The distance is approximately 91.83 meters.
The change in velocity can be calculated as the final velocity (0 m/s) minus the initial velocity (5 m/s). Plugging in the values, the acceleration of the stone is approximately -0.208 m/s^2. The negative sign indicates that the stone is decelerating or slowing down.
Learn more about work done at: https://brainly.com/question/28356414
#SPJ11
A motorist driving a 1151-kg car on level ground accelerates from 20.0
m/s to 30.0 m/s in a time of 5.00 s. Ignoring friction and air resistance, determine the average mechanical power in watts the engine must
supply during this time interval.
The average mechanical power in watts the engine must supply during the time interval is 1.84 × 10^4 W.
Given values are, Mass (m) = 1151 kg
Initial speed (u) = 20.0 m/s
Final speed (v) = 30.0 m/s
Time interval (t) = 5.00 s
And Ignoring friction and air resistance.
Firstly, the acceleration is to be calculated:
Acceleration, a = (v - u) / ta = (30.0 m/s - 20.0 m/s) / 5.00 sa = 2.00 m/s².
Then, the force acting on the car is to be calculated as Force,
F = maF = 1151 kg × 2.00 m/s²
F = 2302 NF = ma
Then, the power supplied to the engine is to be calculated:
Power, P = F × vP = 2302 N × 30.0 m/sP
= 6.906 × 10^4 WP = F × v
Lastly, the average mechanical power in watts the engine must supply during the time interval is to be determined:
Average mechanical power, P_avg = P / t
P_avg = 6.906 × 10^4 W / 5.00 s
P_avg = 1.84 × 10^4 W.
Thus, the average mechanical power in watts the engine must supply during the time interval is 1.84 × 10^4 W.
#SPJ11
Learn more about friction and mechanical power https://brainly.com/question/14817334
Determine the Schwartzschild radius of a black hole equal to the mass of the entire Milky Way galaxy (1.1 X 1011 times the mass of the Sun).
The Schwarzschild radius of a black hole with a mass equal to the mass of the entire Milky Way galaxy is approximately 3.22 × 10^19 meters.
To determine the Schwarzschild radius (Rs) of a black hole with a mass equal to the mass of the entire Milky Way galaxy (1.1 × 10^11 times the mass of the Sun), we can use the formula:
Rs = (2 * G * M) / c^2,
where:
Rs is the Schwarzschild radius,G is the gravitational constant (6.67 × 10^-11 N m^2/kg^2),M is the mass of the black hole, andc is the speed of light (3.00 × 10^8 m/s).Let's calculate the Schwarzschild radius using the given mass:
M = 1.1 × 10^11 times the mass of the Sun = 1.1 × 10^11 * (1.99 × 10^30 kg).
Rs = (2 * 6.67 × 10^-11 N m^2/kg^2 * 1.1 × 10^11 * (1.99 × 10^30 kg)) / (3.00 × 10^8 m/s)^2.
Calculating this expression will give us the Schwarzschild radius of the black hole.
Rs ≈ 3.22 × 10^19 meters.
Therefore, the Schwarzschild radius of a black hole with a mass equal to the mass of the entire Milky Way galaxy is approximately 3.22 × 10^19 meters.
To learn more about Milky Way galaxy, Visit:
https://brainly.com/question/30278445
#SPJ11
Calculate the angle for the third-order maximum of 595 nm wavelength yellow light falling on double slits separated by 0.100 mm.
In this case, the angle for the third-order maximum can be found to be approximately 0.036 degrees. The formula is given by: sinθ = mλ / d
To calculate the angle for the third-order maximum of 595 nm yellow light falling on double slits separated by 0.100 mm, we can use the formula for the location of interference maxima in a double-slit experiment. The formula is given by:
sinθ = mλ / d
Where θ is the angle of the maximum, m is the order of the maximum, λ is the wavelength of light, and d is the separation between the double slits.
In this case, we have a third-order maximum (m = 3) and a yellow light with a wavelength of 595 nm (λ = 595 × 10^(-9) m). The separation between the double slits is 0.100 mm (d = 0.100 × 10^(-3) m).
Plugging in these values into the formula, we can calculate the angle:
sinθ = (3 × 595 × 10^(-9)) / (0.100 × 10^(-3))
sinθ = 0.01785
Taking the inverse sine (sin^(-1)) of both sides, we find:
θ ≈ 0.036 degrees
Therefore, the angle for the third-order maximum of 595 nm yellow light falling on double slits separated by 0.100 mm is approximately 0.036 degrees.
Learn more about double slits here: brainly.com/question/30890401
#SPJ11
A rubber band is used to launch a marble across the floor. The rubber band acts as a spring with a spring constant of 70 N/m. I pull the 7g marble back 12 cm from its equilibrium position and release it to launch it across the room from a starting height of 1.5 m .
6. What system of objects should I use if I want to use conservation of energy to analyze this situation? What interactions do I need to consider.
7. I launch the marble with an initial velocity that is 30 ° above the horizontal. The height of the marble will change during the launch. Write out the conservation of energy equation that will tell us the launch speed.
8. Determine the launch speed.
9. Think about the launch as an instance of (approximately) simple harmonic motion. How long does it take for the marble to be launched?
10. Where does the marble land, assuming it lands on the floor?
Both potential energy and kinetic energy must be considered in this scenario. The launch speed of the marble is 2.18 m/s.The marble lands on the floor 1.04 m from its initial position.
6. The system of objects that should be used if you want to use conservation of energy to analyze this situation are as follows. The rubber band, the marble, and the floor. When you release the marble, the energy stored in the rubber band (potential energy) is converted into the energy of motion (kinetic energy) of the marble. Therefore, both potential energy and kinetic energy must be considered in this scenario.
7. The conservation of energy equation that will tell us the launch speed is given by the following expression:Initial potential energy of rubber band = Final kinetic energy of marble + Final potential energy of marbleWe can calculate the initial potential energy of the rubber band as follows: Uinitial = 1/2 k x²Uinitial = 1/2 × 70 N/m × (0.12 m)²Uinitial = 0.504 JWhere,Uinitial = Initial potential energy of rubber bandk = Spring constantx = Displacement of the rubber band from the equilibrium positionWe can calculate the final kinetic energy of the marble as follows:Kfinal = 1/2 mv²Kfinal = 1/2 × 0.007 kg × v²Where,Kfinal = Final kinetic energy of marblev = Launch velocity of the marbleWe can calculate the final potential energy of the marble as follows:Ufinal = mghUfinal = 0.007 kg × 9.8 m/s² × 1.5 mUfinal = 0.103 JWhere,Ufinal = Final potential energy of marblem = Mass of marbleh = Height of marble from the groundg = Acceleration due to gravityWe can now substitute the values of Uinitial, Kfinal, and Ufinal into the equation for conservation of energy:Uinitial = Kfinal + Ufinal0.504 J = 1/2 × 0.007 kg × v² + 0.103 J
8. Rearranging the equation for v, we get:v = sqrt [(Uinitial - Ufinal) × 2 / m]v = sqrt [(0.504 J - 0.103 J) × 2 / 0.007 kg]v = 2.18 m/sTherefore, the launch speed of the marble is 2.18 m/s.
9. The launch can be thought of as an example of simple harmonic motion since the rubber band acts as a spring, which is a system that exhibits simple harmonic motion. The time period of simple harmonic motion is given by the following expression:T = 2π √(m/k)Where,T = Time period of simple harmonic motionm = Mass of marblek = Spring constant of rubber bandWe can calculate the time period as follows:T = 2π √(m/k)T = 2π √(0.007 kg/70 N/m)T = 0.28 sTherefore, it takes approximately 0.28 s for the marble to be launched.
10. Since the initial velocity of the marble has a vertical component, the marble follows a parabolic trajectory. We can use the following kinematic equation to determine the horizontal distance traveled by the marble:x = v₀t + 1/2at²Where,x = Horizontal distance traveled by marvlev₀ = Initial horizontal velocity of marble (v₀x) = v cos θ = 2.18 m/s cos 30° = 1.89 m/st = Time taken for marble to landa = Acceleration due to gravity = 9.8 m/s²When the marble hits the ground, its height above the ground is zero. We can use the following kinematic equation to determine the time taken for the marble to hit the ground:0 = h + v₀yt + 1/2ayt²Where,h = Initial height of marble = 1.5 mv₀y = Initial vertical velocity of marble = v sin θ = 2.18 m/s sin 30° = 1.09 m/sy = Vertical displacement of marble = -1.5 m (since marble lands on the floor)ay = Acceleration due to gravity = -9.8 m/s² (negative because the acceleration is in the opposite direction to the initial velocity of the marble)Substituting the values into the equation and solving for t, we get:t = sqrt[(2h)/a]t = sqrt[(2 × 1.5 m)/9.8 m/s²]t = 0.55 sTherefore, the marble takes approximately 0.55 s to hit the ground.Using this value of t, we can now calculate the horizontal distance traveled by the marble:x = v₀t + 1/2at²x = 1.89 m/s × 0.55 s + 1/2 × 0 × (0.55 s)²x = 1.04 mTherefore, the marble lands on the floor 1.04 m from its initial position.
Learn more about energy:
https://brainly.com/question/29792091
#SPJ11