If an object is traveling in a circular orbit where its speed is doubled, then its centripetal acceleration will be quadrupled.
Centripetal acceleration is the acceleration of an object traversing a circular path. Because velocity is a vector quantity, i.e., it has both a magnitude ( the speed and a direction), so when the object travels on a circular path, its direction changes constantly and thus as a result of this its velocity changes, producing acceleration,
For instance, when an object in a circular orbit is moved with double doubled, then it has quadrupled centripetal acceleration.
You can learn more about Centripetal acceleration at
https://brainly.com/question/79801
#SPJ4
a 24-g bullet moving at 1,200 m/s is fired through a one-kg block of wood emerging at a speed of 100 m/s. what is the kinetic energy of the block that results from the collision if the block had not been moving prior to the collision and was free to move?
The kinetic energy of the block of wood would be 1148 m/s. The result is obtained by using the law of conservation of momentum.
What is the law of conservation of momentum?
The law of conservation of momentum states that the momentum of a closed system before and after the collision is constant. A closed system means there is no external force acting on the system. The formula would be:
∑p initial = ∑p final
p₁ + p₂ = p₁' + p₂'
m₁v₁ + m₂v₂ = m₁v₁' + m₂v₂'
Where
∑p initial is momentum before the collision.∑p final is momentum after the collision.m₁ and m₂ is the mass of objectv₁ and v₂ is the speed of object before collisionv₁' and v₂' is the speed of object after collisionA bullet moving through a block of wood that is at rest. It has
Mass of bullet, m₁ = 24 gSpeed of bullet, v₁ = 1,200 m/sMass of wood, m₂ = 1 kgSpeed of wood, v₂ = 0Find the kinetic energy of the block that results from collision!
If a bullet moving through a block of wood, it means that the bullet will be united with the block of wood. Then, the speed of both bullet and wood after collision is the same, v'.
The speed of the bullet is
m₁v₁ + m₂v₂ = m₁v₁' + m₂v₂'
m₁v₁ + m₂v₂ = (m₁ + m₂)v'
v' = (m₁v₁ + m₂v₂)/(m₁ + m₂)
v' = (24(1200) + 1(-100))/(24 + 1)
v' = (28800 - 100)/25
v' = (28700)/25
v' = 1148 m/s
The kinetic energy of the block of wood would be
KE₂ = ½m₂v₂'
KE₂ = ½(1)(1148)²
KE₂ = 13,171,904 Joule
Hence, after the collision, the kinetic energy of the block of wood is 13,171,904 Joule.
Learn more about collision here:
https://brainly.com/question/29056127
#SPJ4
a small source of light at the bottom face of a rectangular glass slab 2.25 cm thick is viewed from above. rays of light totally internally reflected at the top surface outline a circle of 7.60 cm in diameter on the bottom surface. determine the refractive index of the glass.
The refractive index of the glass is 1.16, if the thickness of the glass slab is 2.25 cm, and the diameter of the circle is 7.60 cm.
incident angle of the light,θ = 90°
Let the angle of internal refraction is θ₁
Let the refractive index of the glass slab, = μ₁
Refractive index of vacuum, μ₂ = 1
By Snell's law, μ₁sinθ₁ = μ₂sin90
Radius of the circle, R = 7.6/2 = 3.8 cm
Thickness of the slab, and radius of the circle, R, makes the right angle triangle with hypotenuse(AC). So applying the pythagorus theorem,
AC² = 2.25² + 3.8²
AC = √(2.25² + 3.8²)
AC = 4.42
So sinθ₁ = 3.8/4.42
sinθ₁ = 0.86
μ₁ × 0.86 = μ₂×sin90
μ₁ × 0.86 = 1 × 1
μ₁ = 1/0.86
μ₁ = 1.16
So the refractive index of the glass slab, μ₁ = 1.16
To know more about refractive index, here
https://brainly.com/question/23750645
#SPJ4
a car is driving on a curve on the interstate when, all of the sudden, the car encounters ice - reducing the friction to zero. assuming the curve has a radius of 20-m and the interstate is banked at an angle of 10 to the inside, what is the maximum velocity the car can travel to avoid sliding off the interstate
The maximum amount of static friction that the tyres can generate on the road can be used to calculate the maximum speed at which the car can go without slamming off the interstate.
The only force acting on the car when friction is eliminated is gravity, which pulls the vehicle towards the curve's centre.
The formula for calculating the maximum static friction force is
f_max = μ_s * m * g, where
μ_s = coefficient of static friction
m = mass of the car
g = acceleration due to gravity (9.8 m/s^2)
The maximum static friction force can be computed as follows using an assumed static friction coefficient of 0.7:
f_max = 0.7 * m * 9.8 = 6.86 * m N
The formula for the gravitational force is:
f_gravity = m * g * sin(θ), where
θ = bank angle (10°)
The difference between the gravitational force and the maximal static friction force is the net force operating on the automobile. The car won't skid off the road if the net force is zero.
The formula for calculating the maximum velocity is:
v = sqrt(R * g / sin(θ))
where
R = radius of the curve (20 m)
By substituting the values, we get:
v = sqrt(20 * 9.8 / sin(10)) = 26.51 m/s = 94.91 km/h
As a result, the maximum speed at which the car may move without swerving off the highway is roughly 94.91 km/h.
To know more about gravitational force, visit:
https://brainly.com/question/29276623
#SPJ4
Look at the table of results in the
diagram. Calculate the value
shown by the letter E.
The value shown by the letter E is 24V.
Define resistance
A material's ability to obstruct the flow of electrical current is referred to as resistance. The capital letter R serves as a symbol for it. A conductor's ability to obstruct the flow of charges through it is referred to as resistance.
A closed loop is referred to as a circuit where electrons can move. The circuit receives power from an electricity source, like a battery. There won't be any electron movement until the circuit is finished, or until it has made a full circuit loop back to the electrical source.
V = IR
For circuit 5, V = E
I = 8A
R = 3
E = 8*3 = 24V
To learn more about resistance use link below:
brainly.com/question/28135236
#SPJ1
Answer:
8
Explanation:
I need answers, do your thing,
Theres also a question at the bottom asking to find the escape velocity at the surface if the moon in mph.
I don’t need breakdowns or explanations, just answers.
Because the acceleration caused by gravity affects escape velocity. Therefore, the moon's escape velocity must be lower than that of the earth. Moreover, due to a lower escape velocity.
What is the escape velocity of Earth?Ve therefore equals 11.2 km/s x 103 m/s. On Mars, the escape speed is approximately 40,270 kmph, or 11,186 m/s. For instance, when a rocket is used to propel a spacecraft into orbit, the velocity obtained must be higher than the orbital speed to prevent the rocket from returning to Earth.
Escape velocity: What is it?Escape velocity is indeed the bare minimum speed at which a body must be propelled in order to escape the earth's gravitational pull. The smallest speed at which an object must move in order to escape the gravity field is.
TO KNOW MORE ABOUT VELOCITY VISIT:
https://brainly.com/question/18084516
SPJ1
betelgeuse is the bright red star representing the left shoulder of the constellation orion. all the following statements about betelgeuse are true. which one can you infer from its red color?
Its surface is cooler than the surface of the sun is the statement that we can infer from its red color.
Betelgeuse is also called Alpha Orionis. It is the second brightest star in the constellation Orion, thus marking the eastern shoulder of the hunter. Its name is derived from the Arabic term, which means “the giant’s shoulder.” It is one of the most luminous stars in the sky at night.
Having an apparent magnitude of about 0.6 it is a variable star. Its size is roughly 764 times as that of the Sun. As the apparent magnitude of this star is 0.6 which is a comparison with the sunlight, we can say it is cooler than the surface of the sun.
Hence the correct option is A.
--The given question is incomplete, the complete question is,
"betelgeuse is the bright red star representing the left shoulder of the constellation orion. all the following statements about betelgeuse are true. which one can you infer from its red color? a) Its surface is cooler than the surface of the Sun. b) It is much more massive than the Sun c) It is much brighter than the Sun d) It is moving away from us
To know more about Betelgeuse, here
https://brainly.com/question/14527447
#SPJ4
9. two solid spheres, both of radius 5 cm, carry identical total charges of 2 !c. sphere a is a good conductor. sphere b is an insulator, and its charge is distributed uniformly through- out its volume. (i) how do the magnitudes of the electric fields they separately create at a radial distance of 6 cm compare?(a)ea.eb 50(b)ea.eb.0(c)ea5eb.0 (d)0,ea,eb (e)05ea,eb (ii)howdothemagnitudes of the electric fields they separately create at radius 4 cm compare? choose from the same possibilities as in part (i).
(i) The magnitudes of the electric fields they separately create at a radial distance of 6 cm is [tex]E_{a}[/tex]=[tex]E_b}[/tex]. and (ii) The magnitudes of the electric fields they separately create at radius 4 cm is [tex]E_{a} =E_{b}[/tex], so the correct option is option b.
What do you mean by conductor?A conductor refers to a material that allows an electric current to flow through it with ease. In other words, it has a low electrical resistance. Conductors are materials that have a high number of free electrons that are able to move freely through the material. Examples of conductors include copper, aluminum, gold, and silver. These materials are commonly used in the electrical industry to make wires and other electrical components that need to conduct electricity. In addition to materials, a conductor can also refer to a person or an organization that is responsible for directing or leading an orchestra or a choir. In this context, a conductor is in charge of maintaining the ensemble's rhythm and intonation, and interpreting the score in a way that brings out the music's emotional content and intended meaning.
(i) The magnitude of the electric field created by a charged conductor is given by the formula E = [tex]\frac{kq}{r}[/tex], where k is the Coulomb constant, q is the charge, and r is the distance from the center of the sphere.
For a good conductor, like sphere A, the charge will be distributed evenly on the surface of the sphere. So, the electric field at a radial distance of 6cm will be Eₐ = [tex]\frac{kq}{r^{2} }[/tex] = [tex]k\frac{210^{-6} }{(619^{-2} )}^{2} =\frac{k}{72}[/tex]
For an insulator, like sphere B, the charge is distributed uniformly throughout its volume. The electric field at a radial distance of 6cm will be [tex]E_{b}[/tex]= [tex]\frac{kq}{r^{2} }=k\frac{210^{-6} }{(619^{-2} )}^{2} =\frac{k}{72}[/tex]
As we can see, the magnitudes of the electric fields created by both spheres are equal, so the answer is (b) [tex]E_{a} =E_{b}[/tex]
(ii) For the radius of 4cm, the electric field created by sphere A and sphere B will
[tex]E_{a} =\frac{kq}{r^{2} }=k\frac{210^{-6} }{(410^{-2} )^{2} } =\frac{k}{16}\\E_{b} =\frac{kq}{r^{2} }=k\frac{210^{-6} }{(410^{-2} )^{2} } =\frac{k}{16}\\[/tex]
As we can see, the magnitudes of the electric fields created by both spheres are equal at a radius of 4cm, so the answer is (b) [tex]E_{a} =E_{b}[/tex]
To know more about electric fields visit:
https://brainly.com/question/26446532
#SPJ4
Help!!! A heat engine receives 1240 J of heat and exhausts 910 J per cycle of the engine what net work does the engine perform during the cycle?
a) 0 J
b) 330 J
c) 910 J
d) 2150 J
Net work the engine perform during the cycle is b) 330 J.
The net work done by a heat engine is the difference between the heat absorbed by the engine and the heat exhausted. Therefore, the net work done by the engine during a cycle is
1240 J - 910 J = 330 J.
How does the temperature of the hot reservoir affect the efficiency of a heat engine?
The efficiency of a heat engine is directly related to the temperature of the hot reservoir. The higher the temperature of the hot reservoir, the more thermal energy is available for conversion into work. This means that the efficiency of the heat engine increases as the temperature of the hot reservoir increases. The maximum efficiency of a heat engine is given by the Carnot efficiency, which is only achievable when the temperature of the cold reservoir is 0 K (absolute zero) and the temperature of the hot reservoir is infinite.
To know more about cold reservoir visit:
brainly.com/question/14142895
#SPJ4
which is not true about the celestial sphere? group of answer choices the model puts all of the stars at the same distance from earth. the ecliptic is an extension of earth's equator. the north celestial pole is an extension of earth's north pole. the model shows the sun and the stars moving around the earth.
The celestial model doesn't shows the Sun and the stars moving around the earth.
Celestial globes depict the apparent positions of the stars in the sky. They exclude the Sun, Moon, and planets since their positions differ from those of the stars, but the ecliptic, along which the Sun moves, is depicted.
A fictitious sphere surrounding the Earth in which the stars, Sun, Moon, and planets appear to reside.
The celestial sphere is a hypothetical sphere centered on the Earth onto which all celestial bodies can be projected. An observer on the Earth's surface can only view half of the celestial sphere at any given moment because the other half is hidden beneath the horizon.
For more information on celestial sphere kindly visit to
https://brainly.com/question/13196153
#SPJ4
The half-life of francium-223 is 20 minutes. If a sample originally contains 10 g of the isotope, how much remains after an hour?
The amount of the mass of the radioactive isotope remaining after 1 hour is 1.25 g.
What is the mass of the sample remaining after an hour?The mass of the sample remaining after an hour is calculated from the half life of the isotope as shown below.
The half life of the radioactive isotope = 10 minutes
The amount of the mass of the radioactive isotope remaining after 1 hour is calculated as follows;
1 hour = 60 minutes
0 half life ---------------------------> 10 g
20 minutes ------------------------> 5 g
40 minutes -----------------------> 2.5 g
60 minutes -----------------------> 1.25 g
Learn more about half-life here: https://brainly.com/question/2320811
#SPJ1
Help please I've been stuck on this for so long.
Answer:
Explanation:
I think it is the top one as the formula for density is d = M/V, where d is density, M is mass, and V is volume. Density is commonly expressed in units of grams per cubic centimetre.
But I'm not 100% sure
DESCRIBE Why is conifer sap important?
The reasons why conifer sap is important include:
It serves as a source of energy and nutrition for the treeIt helps the tree to defend against pathogens and pestsHow does conifer sap help the tree ?Conifer sap is rich in sugars and other nutrients that the tree needs to grow and survive. It is transported from the roots to the branches and leaves where it is used to fuel the tree's growth and metabolism.
Conifer sap is also known to contain compounds that protect the tree from pathogens and pests. These compounds act as a natural defense mechanism, helping the tree to resist infections and infestations.
Find out more on sap at https://brainly.com/question/9287303
#SPJ1
calculate the wavelength of light that has its third minimum at an angle of 30 degrees when falling on double slits separated by 3
The wavelength of light that is inclined at a specified angle when falling on double slits is calculated to be 428.57 nm.
Angle = 30°
Order of interference m = 3
Distance between the slits d = 3 μ m = 3 × 10⁻⁶ m
We know the relation between wavelength, order of interference and distance as,
λ = d sinθ/(m+1/2)
By putting in the values, we have,
⇒ (3 × 10⁻⁶× sin30°)/(3+1/2) = 4.2857 × 10⁻⁷ m
By converting it to nm, we have,
⇒ 4.2857 × 10⁻⁷ × 10⁹ = 428.57 nm
Thus, the required wavelength of light is calculated to be 428.57 nm.
The question is incomplete. The complete question is 'Calculate the wavelength of light that has its third minimum at an angle of 30.0∘ when falling on double slits separated by 3.00 μm. Explicitly, show how you follow the steps in Problem-Solving Strategies for Wave Optics.'
To know more about wavelength:
https://brainly.com/question/16636743
#SPJ4
6
The best way to increase the mechanical advantage of the following second-class lever is
4
Effort
Load
Fulcrum
Class 2 Lever
A To increase the size of the fulcrum
B) To move the load closer to the fulcrum
To increase the effort
D To move the load further away from the fulcrum
The best way to increase the mechanical advantage of the class 2 lever is to move the load closer to the fulcrum.
option B.
What is mechanical advantage?
The mechanical advantage of a simple machine is the ratio of output force to input force. It is also the ratio of load overcame by a simple machine to the effort applied by the simple machine.
Mathematically, the formula for mechanical advantage of a simple machine is given as;
M.A = output force / input force
M.A = Load / effort
Efficiency of machine = M.A/V.R x 100% = ( distance travelled by load x load ) / ( distance travelled by effort x effort )
Thus, to increase the mechanical advantage requires decrease in the distance travelled by the effort.
Learn more about mechanical advantage here: https://brainly.com/question/25984831
#SPJ1
A −10 nC charge is at the origin. In which direction does the electric field from the charge point at x + 10 cm ?
The direction of the field would be towards the positive end of the charge.
What is the direction of the electric field?We know that the electric field has to do with the region in space where the influence of a charge can be felt. We can see from the question that there is a region around the −10 nC charge where its influence is felt.
Thus, we can see that that the direction of the charge would be in the positive direction to the charge that has been given which is around the charge that has a magnitude of −10 nC.
Learn more about electric field:https://brainly.com/question/15800304
#SPJ1
a car moves with a total distance of 45.0 meters in 10 seconds while slowing down smoothly with a final speed of 3.00 m/s. a) what is the original speed of the car? (2 points) b) what is the car's acceleration? (2 points)
Answer : Original Speed is 6m/s while acceleration is 0.3m/s^2.
What is speed?
--In everyday use and in kinematics, the speed of an object is the magnitude of the change of its position over time or the magnitude of the change of its position per unit of time;
-- it is thus a scalar quantity.
Here in this question we have given final speed , we have to find the intial speed as well as the acceleration of the body.
d = V1 + V2 /2 × t
45 = V1 + 3/2 × 10
V1 = 6 m/s.
Hence initial speed of body is 6m/s .
By using first equation of motion we find the acceleration
we get acceleration is 0.3 .
What is velocity?
-- Velocity is the directional speed of an object in motion as an indication of its rate of change in position as observed from a particular frame of reference and as measured by a particular standard of time .
Learn more about acceleration from https://brainly.com/question/605631.
#SPJ4
A proton is moved so that its electric potential energy increases from 2. 0 × 10-18 J to 6. 0 × 10-18 J. The magnitude of the charge on a proton is 1. 602 × 10-19 C.
The electric potential difference through which the proton moved, to the nearest whole number, is ____V
The electric potential difference through which the proton is moved is [tex]2.49 * 10^-18[/tex]V.
How to calculate electric potential difference?The electric potential difference through which the proton is moved can be calculated using the formula:
V = ΔU/q
Where V is the electric potential difference, ΔU is the change in electric potential energy, and q is the charge of the proton.
Given that the electric potential energy increases from [tex]2.0 * 10^-18[/tex] J to [tex]6.0 * 10^-18[/tex] J and the charge of the proton is 1.602 x 10^-19 C, we can substitute these values into the formula to find the electric potential difference:
V = (6.0 x 10^-18 J - 2.0 x 10^-18 J) / 1.602 x 10^-19 C
V = 4.0 x 10^-18 J / 1.602 x 10^-19 C
V = 2.49 x 10^-18 V
Therefore, the electric potential difference through which the proton is moved is [tex]2.49 x 10^-18[/tex] V.
To know more about electric potential difference visit:
https://brainly.com/question/27091481
#SPJ4
Would the speed of a satellite in close circular orbit about Jupiter be greater than, equal to, or less than 8 km/s?
Due to the satellite's overshooting circular course and movement away from Earth against the pull of gravity, the speed of satellite in such a closed circular orbit would be greater than 8 km/s.
Explain the effect of gravity on satellite in close circular orbit?The direction of gravity always seems to be toward the core of the Earth when a satellite travels around it in a circular orbit.
The satellite will move further before colliding with the Earth if it is assigned speed in either direction that is horizontal to a surface of the planet. This would travel so far if it is provided enough speed that even as it curves it toward the Earth, this should completely miss it. It will circle the Earth if it moves at just the proper pace. An orbit is the term used to describe this kind of motion and indeed the path which a satellite follows.A satellite must move at a speed of 8 km/s (28,000 km/h) or faster to stay its orbit when it is 100 km above the Earth. Satellites do not required to move as quickly at higher altitudes. The higher-altitude, 36,000 km, television communication satellites may fly at a speed of only 3 km/s (11,000 km/h).Thus, due to the satellite's overshooting circular course and movement away from Earth against the pull of gravity, the speed of satellite in such a closed circular orbit would be greater than 8 km/s.
To know more about the pull of gravity, here
https://brainly.com/question/28854345
#SPJ4
two point charges placed 5 cm apart on the x axis. at what points along the x axis is the potential zero?
The distance where the potential of two similar charges (in terms of magnitude and charge) will be zero at 2.5 cm from both sides. That is at Exect middle of both charges.
For finding the potential at any point due to a point charge(q0) is(Vr) = 1/4π∈*q0/r.
if both the charges are the same sign then the point will be in between of both the charges placed,
so Let the distance where the potential is zero be x in the left side so on the right side it will be 5-x.
as lets assume left charge if placed at the origin
so 1/4π∈*q0/x=1/4π∈*q0/5-x. ............. As both the potentials are equals
so 1/x = 1/5-x
x=5-x
so 2x =5 and here x= 2.5 cm
Learn more about Electric Potential: https://brainly.com/question/14306881
#SPJ4
According to newton's second law of motion, if we have a rigid, unchanging mass and we observe it accelerating, what must be happening? question 8 options: a. a force is being applied to the mass b. no force was or is being applied to the massc. the mass must be changing d. the object's inertia is decreasing
"A force is being applied to the mass." that is option A is happening if we have a rigid, unchanging mass and we observe it accelerating.
What is force?A force is an effect in physics that may modify the velocity of an item. A force can cause a mass item to change its velocity, or accelerate. Intuitively, force may be characterized as a push or a pull. A force is a vector quantity since it has both magnitude and direction. The term "force" has a specific meaning in science. At this level, it is quite acceptable to refer to a force as a push or a pull. A force is not something that an item possesses or possesses. Another item applies a force to another. The concept of a force is not restricted to living or non-living entities.
Here,
Newton's second law of motion: F = m · a.
F - force applied.
m - mass of the object receiving the force.
a - the acceleration of the object.
One newton is the force needed to accelerate one kilogram of mass at the rate of one metre per second squared in direction of the applied force. The weight of an object is the amount of force acting on the object due to gravity. SI unit for weight is newton (N).
"There is a force acting on the mass." Option A is what happens when we see a stiff, unchanging mass accelerating.
To know more about force,
https://brainly.com/question/29044739
#SPJ4
a photographer takes a picture with a f/16 stop at 1/30 of a second (as per indicated by her camera). she notices that the subject is a bit blurred so wants to increase the speed to 1/500 of a second. what should the new stop be to have the same exposure level?
To maintain an exposure level equivalent to f/16 at 1/30 of a second, the new stop should be f/5.6. Due to their inverse relationship, the aperture and shutter speed must be adjusted to account for changes in either one by photographer.
When the shutter speed is increased from 1/30 of a second to 1/500 of a second, the aperture must likewise be changed in order to keep the same exposure level. The amount of light entering the camera, which is managed by the aperture and shutter speed, determines the exposure level. The "exposure triangle" describes the connection between aperture, shutter speed, and exposure. The "reciprocal rule," which dictates that if the shutter speed is increased by a factor of 16, the aperture should be reduced by a factor of 4, should be followed by the photographer in order to maintain the same exposure level. In this instance, the new stop should be f/4 since the photographer wishes to raise the shutter speed from 1/30 to 1/500 while maintaining the same exposure level.
learn more about photographer here:
https://brainly.com/question/25379778
#SPJ4
A highway curves to the left with radius of curvature of 46 m and is banked at 19° so that cars can take this curve at higher speeds.
Consider a car of mass 843 kg whose tires have a static friction coefficient 0.88 against the pavement.
How fast can the car take this curve without skidding to the outside of the curve? The acceleration of gravity is 9.8 m/s^2
Answer in units of m/s.
The maximum speed in which the car can move on the curve without skidding to the outside of the curve is 12.46 m/s.
What is the maximum speed of the car without skidding?
The maximum speed in which the car can move on the curve without skidding to the outside of the curve is calculated by using the following formula.
v = √ ( rg tanθ )
where;
r is the radius of the curveg is acceleration due to gravityθ is the banking anglev = √ ( 46 x 9.8 x tan 19 )
v = 12.46 m/s
Learn more about maximum speed on curve here: https://brainly.com/question/14467643
#SPJ1
Find the tension in the two ropes that are holding the 4. 2 kg object in place.
Rope 1 : θ = 57. 6° with respect to the vertical. Rope 2: θ = 33. 8° with respect to the vertical
The tension in the rope at the 57. 6° angle is 48.58 N, and the tension in the rope at the 33. 8° angle is 36.28 N.
What is meant by angle?
An angle is a figure in plane geometry that is created by two rays or lines that have a shared endpoint. The Latin word "angulus," which meaning "corner," is the source of the English term "angle." The shared terminus of two rays is known as the vertex, and the two rays are referred to as sides of an angle.A pair of rays (half-lines) with a shared terminal are combined to form an angle. The latter is referred to as the angle's vertex, and the rays are sometimes referred to as the angle's legs and other times as its arms.Angles with a measurement of zero degrees or zero radians are referred to as zero angles. No of the unit of measurement, the zero angle has a measure of.The tension force exerted by the first rope, T1
The tension force exerted by the second rope, T2
and the force of gravity, mg
T1x = −T1 cos 57.6°
T2x = T2 cos 33.8°
mgx = 0
T1y = T1 sin 57.6°
T2y = T2 sin 33.8°
mgy = −mg
Thus, the x and y components of the resultant force will be:
x:
Rx = T1x + T2x + mgx
Rx = −T1 cos 57.6° + T2 cos 33.8° + 0
Rx = T2 cos 33.8° − T1 cos 57.6° (1)
y:
Ry = T1y + T2y + mgy
Ry = T1 sin57.6°+ T2 sin 33.8° + (−mg)
Ry = T1 sin 57.6° + T2 sin33.8° − mg (2)
The next step is to substitute Rx and Ry in Eq. (1) and Eq. (2) with 0:
Rx = T2 cos 33.8° − T1 cos 57.6°
Ry = T1 sin57.6° + T2 sin 33.8° − mg
↓
0 = T2 cos33.8°− T1 cos 57.6° (3)
0 = T1 sin57.6°+ T2 sin 33.8°− mg (4)
Using these two equations we can easily find T1 and T2.
There are multiple ways in which we can do this. One way would be to first solve Eq. (3) for T2:
0 = T2 cos33.8°− T1 cos 57.6°
T2 cos 33.8° − T1 cos 57.6° = 0
T2 cos 33.8° = T1 cos 57.6°
T2 = T1 cos57.6°/ cos 33.8°
T2 = 0.747T1 (5)
hen, we substitute T2 with 0.735T1 in Eq. (4):
0 = T1 sin 57.6°+ T2 sin 33.8° − mg
0 = T1 sin 57.6° + 0.735T1 sin 33.8°− mg
And we solve it for T1:
0 = T1 (sin 57.6° + 0.747 sin 33.8°) − mg
0 = T1 (0.848) − mg
mg = 0.848T1
0.848T1 = mg
T1 = mg /0.848
T1 = (4.2kg) (9.81 N/kg) / 0.848T
T1 = 48.58 N
Finally, we substitute the value of T1 in Eq. (5) to find T2:
T2 = 0.747T1
T2 = (0.747) (48.58 N)
T2 = 36.28 N
Therefore, the tension in the rope at the 57. 6°angle is 48.58 N, and the tension in the rope at the 33. 8°angle is 36.28 N.
To learn more about angle refer to
https://brainly.com/question/25716982
#SPJ4
Mice can hear sounds with frequencies between 1 kHz and 70 kHz but are there frequencies which mice can hear but humans cannot?
In contrast to the human hearing range of 20 Hz to 20 kHz, mouse hearing extends into the ultrasonic region and ranges from 1 to approximately 100 kHz7,9.
What frequency is too high for human hearing?Our hearing is most sensitive in the frequency range between 2000 and 5000 Hz, however the range of absolute human hearing is 20 to 20,000 Hz. Humans normally have a hearing range of 0 dB and above in terms of loudness.In contrast to the human hearing range of 20 Hz to 20 kHz, mouse hearing extends into the ultrasonic region and ranges from 1 to approximately 100 kHz7,9.The bulk, elasticity, muscles, ligaments, bones, fluid, and inner ear structures all play a role in determining how the ear reacts to sounds. Low frequency noises are resisted by elastic forces, whereas high frequency sounds are resisted by greater masses of force. In this way, frequency range is constrained by mass and elasticity.To learn more about frequency refer to:
https://brainly.com/question/254161
#SPJ1
what is the maximum amount of trans fat as a percentage that could be in this cereal?physics uncertainty and error
The maximum amount of trans fat as a percentage that could be in this cereal should be 0.5%.
This cereal is formulated to be as healthy as possible, which is why we limit the amount of trans fat to 0.5% or less. Trans fat is an unhealthy form of fat that has been linked to several health conditions, so we strive to keep our trans fat content as low as possible. By limiting trans fats to 0.5% or less, we are confident that this cereal is a healthy choice.
This cereal contains no more than 0.5% trans fat, as mandated by the FDA. Trans fat is an unhealthy type of fat that can increase bad cholesterol levels and the risk of heart disease and stroke. To ensure optimal health and safety, this cereal only contains the amount of trans fat that is legally allowed.
To learn more about trans fat, click here:
https://brainly.com/question/29593073
#SPJ4
what is simple harmonic oscillation? select all that apply. what is simple harmonic oscillation? select all that apply. simple harmonic oscillation occurs for objects whose motion can be defined by a sine or cosine curve. , for example simple harmonic oscillation only occurs for a mas-on-a-spring system. simple harmonic oscillation occurs for objects which experience a position () dependent force () of the form , where is some positive constant. simple harmonic oscillation occurs when an object regularly returns to an equilibrium position.
Simple harmonic oscillation occurs when an object regularly returns to an equilibrium position and experiences a position-dependent force of the form , where is some positive constant.
What is harmonic oscillation?Harmonic oscillation is a type of periodic motion where an object oscillates back and forth along a path in a predictable and regular pattern. Examples of harmonic oscillation include the motion of a simple pendulum, the oscillation of a spring, and the vibration of a guitar string. The motion of an object undergoing harmonic oscillation can be described mathematically using a sinusoidal function such as sine, cosine, or a combination of the two.
This force is often associated with a mass-on-a-spring system, and the motion of the object can be defined by a sine or cosine curve.
To learn more about harmonic oscillation
https://brainly.com/question/29273618
#SPJ4
A skier with mass of 62kg is sliding down a snowy slope. Find the coefficient of kinetic friction for the skier if friction is known to be 45. 0
A skier with mass of 62 kg is sliding down a snowy slope. The coefficient of kinetic friction is 0.0738 N
Calculating the problem:The coefficient of kinetic friction can be found using the formula:
Friction = coefficient of kinetic friction × Normal force
We know that the friction force is 45 N and the normal force is equal to the skier's weight, which can be found using the formula
Weight = mass × gravity
Where the mass is 62 kg and the acceleration due to gravity is approximately :9.8 m/s²
So the normal force is: 62 kg × 9.8 = 607.6 N
Therefore, the coefficient of kinetic friction is: Friction / Normal force or approximately
= [tex]\frac{45}{607.6}[/tex] = 0.0738
How does kinetic friction work?The force that opposes the motion of two surfaces in contact as they slide against one another is known as kinetic friction, but other names for it include sliding friction and dynamic friction. The properties of the two surfaces in contact, such as the roughness of their surfaces and the materials they are made of, determine its strength. It acts in the opposite direction of the force applied to an object.
To know more about force :
brainly.com/question/13191643
#SPJ4
two narrow slits are separated by a distance d. their interference pattern is to be observed on a screen a large distance l away. (a) calculate the spacing between successive maxima near the center fringe for light of wavelength 500. nm, when l is 1.00 m and d is 1.00 cm. (b) would you expect to be able to observe the interference of light on the screen for this situation? (c) how close together should the slits be placed for the maxima to be separated by 1.00 mm for this wavelength and screen distance?
The spacing between successive maxima near the center fringe for light of wavelength 500. nm, when l is 1.00 m and d is 1.00 cm is 510^-7 m, Yes, observe the interference of light, distance between the slits be placed for the maxima to be separated by 1.00 mm is 0.5 mm.
Describe wavelength?Wavelength is a measure of the distance between consecutive peaks (or troughs) of a wave, such as a sound wave or an electromagnetic wave (like light). It is typically measured in meters (m) or nanometers (nm). The wavelength of a wave determines its color, with shorter wavelengths appearing as blue or violet and longer wavelengths appearing as red. In the case of electromagnetic waves, the wavelength also determines the type of radiation, such as radio waves, microwaves, infrared, visible light, ultraviolet, X-rays, and gamma rays.
(a) The spacing between successive maxima near the center fringe for light of wavelength 500 nm is given by the formula dsin(θ) = (λ)/d.
Plugging in the given values, we get: dsin(θ) = [tex]\frac{50010^{-91} }{0.01} =510^{-7} m[/tex]
(b) Yes, it would be possible to observe the interference pattern on the screen for this situation.
(c) To find the distance between the slits, we use the same formula and solve for d: d = (λ)/(dsin(θ)) = [tex]\frac{50010^{-91} }{1*10^{-3} } =0.5mm[/tex]
The slits should be placed 0.5 mm apart to have the maxima separated by 1.00 mm for this wavelength and screen distance.
To know more about distance visit:
https://brainly.com/question/15172156
#SPJ4
a saturn v rocket is launched straight up with a constant acceleration of 218 m/s . after 150 s, how fast is the rocket moving and how far has it traveled?
After 150 seconds, the rocket is moving at a velocity of 32700 m/s and has traveled 1,623,500 meters.
A constant acceleration is a change in velocity that does not change over time. If a car accelerates by 20 mph one minute and then another 20 mph the next, its average acceleration remains constant at 20 mph per minute.
We can use the equations of motion to calculate the speed and distance traveled of the rocket. The equation for velocity as a function of time is:
v = at
where v is the velocity, a is the acceleration, and t is the time. Substituting in the given values, we get:
v = 218 m/s * 150 s = 32700 m/s
To find the distance traveled, we can use the equation:
d = 1/2 * at^2
Substituting in the given values, we get:
d = 1/2 * 218 m/s^2 * 150 s^2 = 1,623,500 m
So after 150 seconds, the rocket is moving at a velocity of 32700 m/s and has traveled 1,623,500 meters.
Learn more about velocity here:
https://brainly.com/question/18084516
#SPJ4
a cube whose sides are of length d is placed in a uniform electric field of magnitude so that the field is perpendicular to two opposite faces of the cube. what is the net flux through the cube?
The net flux through the cube is equal to [tex]2E*d^2[/tex]
The net flux through the cube is calculated by the flux through each of the six faces of the cube. The flux through a face is calculated by the electric field through the face multiplied by the area of the face.
For this situation, the electric field is perpendicular to two inverse faces of the cube, which means that the flux through these two faces is the maximum possible (since the field is perpendicular to the face).
The flux through these two faces is given by:
[tex]Flux = E * A = E * d^2[/tex] (where E is the electric field and d is the side length of the cube)
The electric field is parallel to the other four faces of the cube, which means that the flux through these faces is zero (since the field is parallel to the face and not passing through it).
Therefore, the net flux through the cube is the sum of the flux through the two faces where the field is perpendicular:
[tex]Net flux = 2 * (E * d^2) = 2E*d^2[/tex]
So the net flux through the cube is equal to [tex]2E*d^2[/tex], with E being the magnitude of the uniform electric field and d is the side length of the cube.
To learn more about net flux:
https://brainly.com/question/26289097
#SPJ4