An object of mass 0.2 kg is hung from a spring whose spring constant is 80 N/m. The object is subject to a resistive force given by - bå, where is its velocity in meters per second and b = 4 Nm-sec. (a) Set up differnetial equation of motion for free oscillations of the system and find the period of such oscillations. (b)The object is subjected to a sinusoidal driving force given by F(t) = Fosin(wt), where Fo = 2 N and w = 30 sec-1. In the steady state, what is the amplitude of the forced oscillation? (c) Find Q for the system - is the system underdamped, overdamped or critically damped? (d) What is the mean power input? (e) What is the energy

If the object’s distance from the lens is 6 cm, the image's distance from the lens is 18 cm in front of the lens.

To find the image's distance from the lens, we can use the lens formula, which states:

1/f = 1/v - 1/u

where:

f is the focal length of the lens,

v is the image distance from the lens,

u is the object distance from the lens.

Height of the object (h₁) = 4 cm (positive, as it is above the principal axis)

Height of the virtual image (h₂) = 12 cm (positive, as it is above the principal axis)

Object distance (u) = 6 cm (positive, as the object is in front of the lens)

Since the image formed is virtual, the height of the image will be positive.

We can use the magnification formula to relate the object and image heights:

magnification (m) = h₂/h₁

= -v/u

Rearranging the magnification formula, we have:

v = -(h₂/h₁) * u

Substituting the given values, we get:

v = -(12/4) * 6

v = -3 * 6

v = -18 cm

The negative sign indicates that the image is formed on the same side of the lens as the object.

Learn more about distance -

brainly.com/question/26550516

#SPJ11

True. Doubling an object's velocity increases its kinetic energy by a factor of four.

The relationship between kinetic energy (KE) and velocity (v) is given by the equation [tex]KE=\frac{1}{2}*m * V^{2}[/tex]

where m is the mass of the object. According to this equation, kinetic energy is directly proportional to the square of the velocity. If we consider an initial velocity [tex]V_1[/tex], the initial kinetic energy would be:

[tex]KE_1=\frac{1}{2} * m * V_1^{2}[/tex].

Now, if we double the velocity to [tex]2V_1[/tex], the new kinetic energy would be [tex]KE_2=\frac{1}{2} * m * (2V_1)^2 = \frac{1}{2} * m * 4V_1^2[/tex].

Comparing the initial and new kinetic energies, we can see that [tex]KE_2[/tex] is four times larger than [tex]KE_1[/tex]. Therefore, doubling the velocity results in a fourfold increase in kinetic energy.

Learn more about velocity here:

https://brainly.com/question/18084516

#SPJ11

(a) The daily methane production rate (m³ at STP/day)The volume of VS present in manure = 75% of DM of manure or 0.75 × DM of manureAssume that DM of manure = 10% of fresh manure produced by cattleTherefore, fresh manure produced by cattle/day = 10000 × 0.1 = 1000 tonnes/dayVS in 1 tonne of fresh manure = 0.75 × 0.1 = 0.075 tonneVS in 1000 tonnes of fresh manure/day = 1000 × 0.075 = 75 tonnes/dayMethane produced from 1 tonne of VS = 0.25 m³ at STPTherefore, methane produced from 1 tonne of VS in a day = 0.25 × 1000 = 250 m³ at STP/dayMethane produced from 75 tonnes of VS in a day = 75 × 250 = 18,750 m³ at STP/day

(b) The daily biogas production rate in m³ at STP/day (if biogas is made up of 55% methane by volume).Biogas produced from 75 tonnes of VS/day will contain:

(c) If the biogas is used to generate electricity at a heat rate of 10,500 BTU/kWh, how many units of electricity (in kWh) can be produced annually?One kWh = 3,412 BTU of heat10,312.5 m³ at STP of methane produced from the biogas = 10,312.5/0.7179 = 14,362 kg of methaneThe energy content of methane = 55.5 MJ/kgEnergy produced from the biogas/day = 14,362 kg × 55.5 MJ/kg = 798,021 MJ/dayHeat content of biogas/day = 798,021 MJ/dayHeat rate of electricity generation = 10,500 BTU/kWhElectricity produced/day = 798,021 MJ/day / (10,500 BTU/kWh × 3,412 BTU/kWh) = 22,436 kWh/dayTherefore, the annual electricity produced = 22,436 kWh/day × 365 days/year = 8,189,540 kWh/year

(d) It is proposed to use the waste heat from the electrical power generation unit for heating barns and milk parlors, and for hot water. This will displace propane (C3H8) gas which is currently used for these purposes. If 80% of waste heat can be recovered, how many pounds of propane gas will the farm displace annually?Propane energy content = 46.3 MJ/kgEnergy saved by using waste heat = 798,021 MJ/day × 0.8 = 638,417 MJ/dayTherefore, propane required/day = 638,417 MJ/day ÷ 46.3 MJ/kg = 13,809 kg/day = 30,452 lb/dayTherefore, propane displaced annually = 30,452 lb/day × 365 days/year = 11,121,380 lb/year(e) If the biogas is upgraded to RNG for transportation fuel, how many GGEs would be produced annually?Energy required to produce 1 GGE of CNG = 128.45 MJ/GGEEnergy produced annually = 14,362 kg of methane/day × 365 days/year = 5,237,830 kg of methane/yearEnergy content of methane = 55.5 MJ/kgEnergy content of 5,237,830 kg of methane = 55.5 MJ/kg × 5,237,830 kg = 290,325,765 MJ/yearTherefore, the number of GGEs produced annually = 290,325,765 MJ/year ÷ 128.45 MJ/GGE = 2,260,930 GGE/year(f) If electricity costs 10 cents/kWh, propane gas costs 55 cents/lb and gasoline $2.50 per gallon, calculate farm revenues and/or avoided costs for each of the following biogas utilization options (i) CHP which is parts (c) and (d), (ii) RNG which is part (e).CHP(i) Electricity sold annually = 8,189,540 kWh/year(ii) Propane displaced annually = 11,121,380 lb/yearRevenue from electricity = 8,189,540 kWh/year × $0.10/kWh = $818,954/yearSaved cost for propane = 11,121,380 lb/year × $0.55/lb = $6,116,259/yearTotal revenue and/or avoided cost = $818,954/year + $6,116,259/year = $6,935,213/yearRNG(i) Number of GGEs produced annually = 2,260,930 GGE/yearRevenue from RNG = 2,260,930 GGE/year × $2.50/GGE = $5,652,325/yearTherefore, farm reve

Biogas is a gas produced by anaerobic activity which degrades organic materials. Examples of these organic materials are manure, domestic sewage, or any organic waste that can be decomposed by living things under anaerobic conditions. The main ingredients in biogas are methane and carbon dioxide.

Learn More About Biogas at https://brainly.com/question/32179195

#SPJ11

The value of the largest and smallest angles of the second polarizer, which would allow for the observed intensity of 2% of the initial light intensity, can be determined based on the concept of Malus's law.

Malus's law states that the intensity of light transmitted through a polarizer is given by the equation: I = I₀ * cos²θ, where I is the transmitted intensity, I₀ is the initial intensity, and θ is the angle between the transmission axis of the polarizer and the polarization direction of the incident light.

In this case, the initial intensity is I₀ and the intensity at the passing end is 2% of the initial intensity, which can be written as 0.02 * I₀.

Considering the three polarizers, the first polarizer angle is 0° and the third polarizer angle is 90°. Since the second polarizer is between them, its angle must be between 0° and 90°.

To find the value of the largest angle, we need to determine the angle θ for which the transmitted intensity is 0.02 * I₀. Solving the equation 0.02 * I₀ = I₀ * cos²θ for cos²θ, we find cos²θ = 0.02.

Taking the square root of both sides, we have cosθ = √0.02. Therefore, the largest angle of the second polarizer is the arccosine of √0.02, which is approximately 81.8°.

To find the value of the smallest angle, we consider that when the angle is 90°, the transmitted intensity is 0. Therefore, the smallest angle of the second polarizer is 90°.

Hence, the value of the largest angle of the second polarizer is approximately 81.8°, and the value of the smallest angle is 90°.

learn more about "intensity":- https://brainly.com/question/28145811

#SPJ11

The wavelength of the photon is 1.52 x 10⁻⁷ m and the frequency of the photon is 1.98 x 10¹⁵ Hz.

The formula to calculate the wavelength of the photon is given by:λ = c / f where c is the speed of light and f is the frequency of the photon. The formula to calculate the frequency of the photon is given by:

f = E / h where E is the energy of the photon and h is Planck's constant which is equal to 6.626 x 10⁻³⁴ J s.1. Energy of the photon is Ephoton = 1.72 x 10⁻¹⁸ J

The speed of light in a vacuum is given by c = 3.00 x 10⁸ m/s.The frequency of the photon is:

f = E / h

= (1.72 x 10⁻¹⁸) / (6.626 x 10⁻³⁴)

= 2.59 x 10¹⁵ Hz

Wavelength of the photon is:

λ = c / f

= (3.00 x 10⁸) / (2.59 x 10¹⁵)

= 1.16 x 10⁻⁷ m

Therefore, the wavelength of the photon is 1.16 x 10⁻⁷ m and the frequency of the photon is 2.59 x 10¹⁵ Hz.2. Energy of the photon is Ephoton = 663 MeV.1 MeV = 10⁶ eVThus, energy in Joules is:

Ephoton = 663 x 10⁶ eV

= 663 x 10⁶ x 1.6 x 10⁻¹⁹ J

= 1.06 x 10⁻¹¹ J

The frequency of the photon is:

f = E / h

= (1.06 x 10⁻¹¹) / (6.626 x 10⁻³⁴)

= 1.60 x 10²² Hz

The mass of photon can be calculated using Einstein's equation:

E = mc²where m is the mass of the photon.

c = speed of light

= 3 x 10⁸ m/s

λ = h / mc

where h is Planck's constant. Substituting the values in this equation, we get:

λ = h / mc

= (6.626 x 10⁻³⁴) / (1.06 x 10⁻¹¹ x (3 x 10⁸)²)

= 3.72 x 10⁻¹⁴ m

Therefore, the wavelength of the photon is 3.72 x 10⁻¹⁴ m and the frequency of the photon is 1.60 x 10²² Hz.3. Energy of the photon is Ephoton = 4.61 keV.Thus, energy in Joules is:

Ephoton = 4.61 x 10³ eV

= 4.61 x 10³ x 1.6 x 10⁻¹⁹ J

= 7.38 x 10⁻¹⁶ J

The frequency of the photon is:

f = E / h

= (7.38 x 10⁻¹⁶) / (6.626 x 10⁻³⁴)

= 1.11 x 10¹⁸ Hz

Wavelength of the photon is:

λ = c / f

= (3.00 x 10⁸) / (1.11 x 10¹⁸)

= 2.70 x 10⁻¹¹ m

Therefore, the wavelength of the photon is 2.70 x 10⁻¹¹ m and the frequency of the photon is 1.11 x 10¹⁸ Hz.4. Energy of the photon is Ephoton = 8.20 eV.

Thus, energy in Joules is:

Ephoton = 8.20 x 1.6 x 10⁻¹⁹ J

= 1.31 x 10⁻¹⁸ J

The frequency of the photon is:

f = E / h

= (1.31 x 10⁻¹⁸) / (6.626 x 10⁻³⁴)

= 1.98 x 10¹⁵ Hz

Wavelength of the photon is:

λ = c / f= (3.00 x 10⁸) / (1.98 x 10¹⁵)

= 1.52 x 10⁻⁷ m

Therefore, the wavelength of the photon is 1.52 x 10⁻⁷ m and the frequency of the photon is 1.98 x 10¹⁵ Hz.

To know more about wavelength visit:

https://brainly.com/question/31143857

#SPJ11

Ephoton is the energy of the photon, h is the Planck's constant (6.626 x 10^-34 J·s), c is the speed of light in a vacuum (3.00 x 10^8 m/s), λ is the wavelength, and f is the frequency.

To calculate the wavelength (λ) and frequency (f) of photons with given energies, we can use the equations:

Ephoton = h * f

c = λ * f

where Ephoton is the energy of the photon, h is the Planck's constant (6.626 x 10^-34 J·s), c is the speed of light in a vacuum (3.00 x 10^8 m/s), λ is the wavelength, and f is the frequency.

Let's calculate the values for each given energy:

Ephoton = 1.72 x 10^-18 J:

Using Ephoton = h * f, we can solve for f:

f = Ephoton / h = (1.72 x 10^-18 J) / (6.626 x 10^-34 J·s) ≈ 2.60 x 10^15 Hz.

Now, using c = λ * f, we can solve for λ:

λ = c / f = (3.00 x 10^8 m/s) / (2.60 x 10^15 Hz) ≈ 1.15 x 10^-7 m.

Ephoton = 663 MeV:

First, we need to convert the energy from MeV to Joules:

Ephoton = 663 MeV = 663 x 10^6 eV = 663 x 10^6 x 1.6 x 10^-19 J = 1.061 x 10^-10 J.

Using Ephoton = h * f, we can solve for f:

f = Ephoton / h = (1.061 x 10^-10 J) / (6.626 x 10^-34 J·s) ≈ 1.60 x 10^23 Hz.

Now, using c = λ * f, we can solve for λ:

λ = c / f = (3.00 x 10^8 m/s) / (1.60 x 10^23 Hz) ≈ 1.87 x 10^-15 m.

Ephoton = 4.61 keV:

First, we need to convert the energy from keV to Joules:

Ephoton = 4.61 keV = 4.61 x 10^3 eV = 4.61 x 10^3 x 1.6 x 10^-19 J = 7.376 x 10^-16 J.

Using Ephoton = h * f, we can solve for f:

f = Ephoton / h = (7.376 x 10^-16 J) / (6.626 x 10^-34 J·s) ≈ 1.11 x 10^18 Hz.

Now, using c = λ * f, we can solve for λ:

λ = c / f = (3.00 x 10^8 m/s) / (1.11 x 10^18 Hz) ≈ 2.70 x 10^-10 m.

Ephoton = 8.20 eV:

Using Ephoton = h * f, we can solve for f:

f = Ephoton / h = (8.20 eV) / (6.626 x 10^-34 J·s) ≈ 1.24 x 10^15 Hz.

Now, using c = λ * f, we can solve for λ:

λ = c / f = (3.00 x 10^8 m/s) / (1.24 x 10^15 Hz) ≈ 2.42 x 10^-7 m.

To know more about wavelength, visit:

https://brainly.com/question/31143857

#SPJ11

The magnitude of the charge on the positive plate if the plates area is 0.40 m² and the diſtance between the plate is 0.0126 C.

The formula for the capacitance of a parallel plate capacitor is

C = εA/d

Where,C = capacitance,

ε = permittivity of free space,

A = area of plates,d = distance between plates.

We can use this formula to find the capacitance of the parallel plate capacitor and then use the formula Q = CV to find the magnitude of the charge on the positive plate.

potential, V = 3000 V

area of plates, A = 0.40 m²

distance between plates, d = ?

We need to find the magnitude of the charge on the positive plate.

Let's start by finding the distance between the plates from the formula,

C = εA/d

=> d = εA/C

where, ε = permittivity of free space

= 8.85 x 10⁻¹² F/m²

C = capacitance

A = area of plates

d = distance between plates

d = εA/Cd

= (8.85 x 10⁻¹² F/m²) × (0.40 m²) / C

Now we know that Q = CV

So, Q = C × V

= 3000 × C

Q = 3000 × C

= 3000 × εA/d

= (3000 × 8.85 x 10⁻¹² F/m² × 0.40 m²) / C

Q = (3000 × 8.85 x 10⁻¹² × 0.40) / [(8.85 x 10⁻¹² × 0.40) / C]

Q = (3000 × 8.85 x 10⁻¹² × 0.40 × C) / (8.85 x 10⁻¹² × 0.40)

Q = 0.0126 C

The magnitude of the charge on the positive plate is 0.0126 C.

Learn more about capacitor :

brainly.com/question/30614136

#SPJ11

The focal length of the makeup mirror is approximately 39.2 cm. The magnification of 1.45 and the distance of the object (person's face) at 12.2 cm. The positive magnification indicates an upright image.

The type of mirror that causes magnification is a concave mirror. Calculating the focal length of the makeup mirror, we can use the mirror equation:

1/f = 1/di + 1/do,

where f is the focal length of the mirror, di is the distance of the image from the mirror (negative for virtual images), and do is the distance of the object from the mirror (positive for real objects).

Magnification (m) = 1.45

Distance of the object (do) = 12.2 cm = 0.122 m

Since the magnification is positive, it indicates an upright image. For a concave mirror, the magnification is given by:

m = -di/do,

where di is the distance of the image from the mirror.

Rearranging the magnification equation, we can solve for di:

di = -m * do = -1.45 * 0.122 m = -0.1769 m

Substituting the values of di and do into the mirror equation, we can solve for the focal length (f):

1/f = 1/di + 1/do = 1/(-0.1769 m) + 1/0.122 m ≈ -5.65 m⁻¹ + 8.20 m⁻¹ = 2.55 m⁻¹

f ≈ 1/2.55 m⁻¹ ≈ 0.392 m ≈ 39.2 cm

Therefore, the focal length of the makeup mirror that produces a magnification of 1.45 when a person's face is 12.2 cm away is approximately 39.2 cm.

Learn more about ”focal length” here:

brainly.com/question/15365254

#SPJ11

The probability of transmission is zero.

Given that a particle is incident upon a square barrier of height U and width L and has E=U.

We need to find the probability of transmission.

Let us assume that the energy of the incident particle is E.

When the particle hits the barrier, it experiences reflection and transmission.

The Schrödinger wave function is given by;ψ = Ae^ikx + Be^-ikx

Where, A and B are the amplitude of the waves.

The coefficient of transmission is given by;T = [4k1k2]/[(k1+k2)^2]

Where k1 = [2m(E-U)]^1/2/hk2

               = [2mE]^1/2/h

Since the particle has E = U.

Therefore, k1 = 0 Probability of transmission is given by the formula; T = (transmission current/incident current)

Here, the incident current is given by; Incident = hv/λ

Where v is the velocity of the particle.

λ is the de Broglie wavelength of the particleλ = h/p

                                                                            = h/mv

Therefore, Incident = hv/h/mv

                                 = mv/λ

We know that m = 150, E = U = 150, and L = 1

The de Broglie wavelength of the particle is given by; λ = h/p

                                                                                             = h/[2m(E-U)]^1/2

The coefficient of transmission is given by;T = [4k1k2]/[(k1+k2)^2]

Where k1 = [2m(E-U)]^1/2/hk2

               = [2mE]^1/2/h

Since the particle has E = U.

Therefore, k1 = 0k2

                      = [2mE]^1/2/h

                      = [2 × 150 × 1.6 × 10^-19]^1/2 /h

                      = 1.667 × 10^10 m^-1

Now, the coefficient of transmission,T = [4k1k2]/[(k1+k2)^2]

                                                              = [4 × 0 × 1.667 × 10^10]/[(0+1.667 × 10^10)^2]

                                                               = 0

Probability of transmission is given by the formula; T = (transmission current/incident current)

Here, incident current is given by; Incident = mv/λ

                                                                       = 150v/[6.626 × 10^-34 / (2 × 150 × 1.6 × 10^-19)]

Iincident = 3.323 × 10^18

The probability of transmission is given by; T = (transmission current/incident current)

                                                                           = 0/3.323 × 10^18

                                                                           = 0

Hence, the probability of transmission is zero.

Learn more about transmission from the given link;

https://brainly.in/question/54329779

#SPJ11

The angular acceleration at t = 5 seconds is 298 rad/s².

Angular acceleration, α = 0.13 rad/s²

Initial angular velocity,

ω₁ = 0Final angular velocity,

ω₂ = 6

We have to find the time it takes to reach this final velocity. We know that

Acceleration, a = αTime, t = ?

Initial velocity, u = ω₁Final velocity, v = ω₂Using the formula v = u + at

The final velocity of an object, v = u + at is given, where v is the final velocity of the object, u is the initial velocity of the object, a is the acceleration of the object, and t is the time taken for the object to change its velocity from u to v.

Substituting the given values we get,

6 = 0 + (0.13)t6/0.13 = t461.5 seconds ≈ 62 seconds

Therefore, the time taken to get to 6 rad/s is 62 seconds.3) The given parameters are given below:

Mass of the car, m = 1110 kg

Radius of the track, r = 26 m

Time taken to complete one lap around the track, t = 21 sWe have to find the magnitude of the force of friction exerted on the car by the track.

We know that:

Centripetal force, F = (mv²)/r

The force that acts towards the center of the circle is known as centripetal force.

Substituting the given values we get,

F = (1110 × 6.12²)/26F

= 16548.9 N

≈ 16550 N

To find the force of friction, we have to find the force acting in the opposite direction to the centripetal force.

Therefore, the magnitude of the force of friction exerted on the car by the track is 16550 N.2) The given angular velocity function is, ω = 4t³ - 2t + 3We have to find the angular acceleration at t = 5 seconds.We know that the derivative of velocity with respect to time is acceleration.

Therefore, Angular velocity, ω = 4t³ - 2t + 3 Angular acceleration, α = dω/dt Differentiating the given function w.r.t. t we get,α = dω/dt = d/dt (4t³ - 2t + 3)α = 12t² - 2At t = 5,α = 12(5²) - 2 = 298 rad/s².

To know m ore about angular acceleration visit:-

https://brainly.com/question/1980605

#SPJ11

Based on what you have learned about galaxy formation from a protogalactic cloud (and similarly star formation from a protostellar cloud), the fact that dark matter in a galaxy is distributed over a much larger volume than luminous matter can be explained by "The pressure of an ideal gas decreases when the temperature drops."

(II)How is this true?

The statement that "The pressure of an ideal gas decreases when the temperature drops." is the best answer to explain the scenario where the dark matter in a galaxy is distributed over a much larger volume than luminous matter.

In general, dark matter makes up about 85% of the universe's total matter, but it does not interact with electromagnetic force. As a result, it cannot be seen directly. In addition, it is referred to as cold dark matter (CDM), which means it moves at a slow pace. This is in stark contrast to the luminous matter, which is found in the disk of the galaxy, which is very concentrated and visible.

Dark matter is influenced by the pressure created by the gas and stars in a galaxy. If dark matter were to interact with luminous matter, it would collapse to form a disk in the galaxy's center. However, the pressure of the gas and stars prevents this from occurring, causing the dark matter to be spread over a much larger volume than the luminous matter.

The pressure of the gas and stars, in turn, is determined by the temperature of the gas and stars. When the temperature decreases, the pressure decreases, causing the dark matter to be distributed over a much larger volume. This explains why dark matter in a galaxy is distributed over a much larger volume than luminous matter.

#SPJ11

Learn more about luminous matter and  temperature https://brainly.com/question/26223390

(a) The momentum of the electron is 2.16 times its rest momentum.(b) The wavelength of the proton is 8246 picometers.

(a) The momentum of an electron with a total energy of 2.38 times its rest energy:

E² = (pc)² + (mc²)²

Given that the total energy is 2.38 times the rest energy, we have:

E = 2.38mc²

(2.38mc²)² = (pc)² + (mc²)²

5.6644m²c⁴ = p²c² + m²⁴

4.6644m²c⁴ = p²c²

4.6644m²c² = p²

Taking the square root of both sides:

pc = √(4.6644m²c²)

p = √(4.6644m²c²) / c

p = √4.6644m²

p = 2.16m

The momentum of the electron is 2.16 times its rest momentum.

(b)

To calculate the wavelength of a proton with a speed of 48 km/s:

λ = h / p

The momentum of the proton can be calculated using the formula:

p = mv

p = (1.6726219 × 10⁻²⁷) × (48,000)

p = 8.0333752 × 10⁻²³ kg·m/s

The wavelength using the de Broglie wavelength formula:

λ = h / p

λ = (6.62607015 × 10⁻³⁴) / (8.0333752 × 10⁻²³ )

λ ≈ 8.2462 × 10⁻¹²

λ ≈ 8246 pm

The wavelength of the proton is 8246 picometers.

To know more about the wavelength:

https://brainly.com/question/32900586

#SPJ4

The magnitudes of the currents through R1 and R2 in Figure 1 are 0.84 A and 1.4 A, respectively.

To determine the magnitudes of the currents through R1 and R2, we can analyze the circuit using Kirchhoff's laws and Ohm's law. Let's break down the steps:

1. Calculate the total resistance (R_total) in the circuit:

  R_total = R1 + R2 + r1 + r2

  where r1 and r2 are the internal resistances of the batteries.

2. Apply Kirchhoff's voltage law (KVL) to the outer loop of the circuit:

  V1 - I1 * R_total = V2

  where V1 and V2 are the voltages of the batteries.

3. Apply Kirchhoff's current law (KCL) to the junction between R1 and R2:

  I1 = I2

4. Use Ohm's law to express the currents in terms of the resistances:

  I1 = V1 / (R1 + r1)

  I2 = V2 / (R2 + r2)

5. Substitute the expressions for I1 and I2 into the equation from step 3:

  V1 / (R1 + r1) = V2 / (R2 + r2)

6. Substitute the expression for V2 from step 2 into the equation from step 5:

  V1 / (R1 + r1) = (V1 - I1 * R_total) / (R2 + r2)

7. Solve the equation from step 6 for I1:

  I1 = (V1 * (R2 + r2)) / ((R1 + r1) * R_total + V1 * R_total)

8. Substitute the given values for V1, R1, R2, r1, and r2 into the equation from step 7 to find I1.

9. Calculate I2 using the expression I2 = I1.

10. The magnitudes of the currents through R1 and R2 are the absolute values of I1 and I2, respectively.

Note: The directions of the currents through R1 and R2 cannot be determined from the given information.

For more such questions on magnitudes, click on:

https://brainly.com/question/30337362

#SPJ8

The expected outlet temperature of oil is 48.24°C.

Given Data:

Length of heat exchanger, L = 8 m

Mass flow rate of water, mw = 2.5 kg/s

Inlet temperature of water, Tw1 = 10°C

Outlet temperature of water, Tw2 = 10.7°C

Mass flow rate of oil, mo = 0.2 kg/s

Inlet temperature of oil, To1 = 140°C (T1)

Type of copper tube, Std. type M (Copper)

Therefore, the expected outlet temperature of oil can be determined by the formula for overall heat transfer coefficient and the formula for log mean temperature difference as below,

Here, U is the overall heat transfer coefficient,

A is the surface area of the heat exchanger, and

ΔTlm is the log mean temperature difference.

On solving the above equation we can determine ΔTlm.

Therefore, the temperature of the oil at the outlet can be determined using the formula as follows,

Here, To2 is the expected outlet temperature of oil.

Therefore, on substituting the above values in the equation, we get:

Thus, the expected outlet temperature of oil is 48.24°C.

Learn more about temperature, here

https://brainly.com/question/1461624

#SPJ11

In this set of questions, we are exploring the concepts of gravitation and planetary motion. We use the formulas related to gravitational force, orbital speed, and orbital radius to solve various problems.

Firstly, we calculate the gravitational force between two whales and compare it to the gravitational force between each whale and the Earth. Then, we determine the gravitational force on an asteroid and a planet, as well as the orbital speed and time taken for an asteroid to complete one orbit.

Next, we find the orbital radius and angular momentum of a comet orbiting a star, and also calculate the speed of the comet at its farthest position. Finally, we discuss the period of a geosynchronous satellite orbiting the Earth and how satellites can be used to determine the mass of unknown planets.

a. To calculate the gravitational force between the whale shark and the blue whale, we use the formula F = GMm/r^2, where G is the gravitational constant, M and m are the masses of the two objects, and r is the distance between them. Plugging in the values, we find the gravitational force between them.

b. To compare the gravitational force between the two animals and the Earth, we calculate the gravitational force between each animal and the Earth using the same formula.

We observe that the force between the animals is much smaller compared to the force between each animal and the Earth. This is because the mass of the Earth is significantly larger than the mass of the animals, resulting in a stronger gravitational force.

c. Objects on Earth do not seem to be attracted to each other strongly because the gravitational force between them is much weaker compared to the gravitational force between each object and the Earth.

The mass of the Earth is substantially larger than the mass of individual objects on its surface, causing the gravitational force exerted by the Earth to dominate and make the gravitational force between objects on Earth negligible in comparison.

Learn more about satellite click here:

brainly.com/question/28766254

#SPJ11

The total current in the circuit is 0.028 (A).

To find the total current in the circuit, we can use Ohm's Law and the concept of total resistance in a series circuit. In a series circuit, the total resistance (R_total) is the sum of the individual resistances.

Given resistors:

R1 = 78 Ω

R2 = 35 Ω

R3 = 60 Ω

R4 = 42 Ω

Total resistance (R_total) in the circuit:

R_total = R1 + R2 + R3 + R4

R_total = 78 Ω + 35 Ω + 60 Ω + 42 Ω

R_total = 215 Ω

We know that the total current (I_total) in the circuit is given by Ohm's Law:

I_total = V / R_total

where V is the voltage provided by the battery (6 V) and R_total is the total resistance.

Substituting the given values:

I_total = 6 V / 215 Ω

I_total ≈ 0.028 A

Therefore, the total current in the circuit is approximately 0.028 amperes (A).

To know more about ohm's law refer here: https://brainly.com/question/1247379#

#SPJ11

To determine the magnitude of the current in the wire that will cause it to remain at rest on the inclined plane, we need to consider the forces acting on the wire and achieve equilibrium.

Gravity force (F_gravity):

The force due to gravity can be calculated using the formula: F_gravity = m × g, where m is the mass of the wire and g is the acceleration due to gravity. Substituting the given values, we have F_gravity = 10.0 g × 9.8 m/s².

Magnetic force (F_magnetic):

The magnetic force acting on the wire can be calculated using the formula: F_magnetic = I × L × B × sin(θ), where I is the current in the wire, L is the length of the wire, B is the magnetic field strength, and θ is the angle between the wire and the magnetic field.

In this case, θ is 45˚ and sin(45˚) = √2 / 2. Thus, the magnetic force becomes F_magnetic = I × L × B × (√2 / 2).

To achieve equilibrium, the magnetic force must balance the force due to gravity. Therefore, F_magnetic = F_gravity.

By equating the two forces, we have:

I × L × B × (√2 / 2) = 10.0 g × 9.8 m/s²

Solve for the current (I):

Rearranging the equation, we find:

I = (10.0 g × 9.8 m/s²) / (L × B × (√2 / 2))

Substituting the given values, we have:

I = (10.0 g × 9.8 m/s²) / (5.00 cm × 2.0 T × (√2 / 2))

Converting 5.00 cm to meters and simplifying, we have:

I = (10.0 g × 9.8 m/s²) / (0.050 m × 2.0 T)

Calculate the current (I):

Evaluating the expression, we find that the current required to keep the wire at rest on the incline is approximately 196 A.

Therefore, the magnitude of the current in the wire that will cause it to remain at rest is approximately 196 A.

Learn more about magnitude here,

https://brainly.com/question/30337362

#SPJ11

The magnitude of the resulting magnetic field at the point (0, 1.4 m, 0) is approximately 8.87 × 10⁻⁶ T.

The magnetic field is a vector quantity and it has both magnitude and direction. The magnetic field is produced due to the moving electric charges, and it can be represented by magnetic field lines. The strength of the magnetic field is represented by the density of magnetic field lines, and the direction of the magnetic field is represented by the orientation of the magnetic field lines. The formula for the magnetic field produced by a current-carrying conductor is given byB = (μ₀/4π) (I₁ L₁) / r₁ ²B = (μ₀/4π) (I₂ L₂) / r₂

whereB is the magnetic field,μ₀ is the permeability of free space, I₁ and I₂ are the currents in the two conductors, L₁ and L₂ are the lengths of the conductors, r₁ and r₂ are the distances between the point where the magnetic field is to be found and the two conductors respectively.Given data:Current in first wire I₁ = 53 A

Current in second wire I₂ = 52 A

Distance from the first wire r₁ = 1.4 m

Distance from the second wire r₂ = 4.2 m

Formula used to find the magnetic field

B = (μ₀/4π) (I₁ L₁) / r₁ ²B = (μ₀/4π) (I₂ L₂) / r₂For the first wire: The wire lies along the x-axis and carries a current of 53 A in the positive × direction. Therefore, I₁ = 53 A, L₁ = ∞ (the wire is infinite), and r₁ = 1.4 m.

So, the magnetic field due to the first wire is,B₁ = (μ₀/4π) (I₁ L₁) / r₁ ²= (4π×10⁻⁷ × 53) / (4π × 1.4²)= (53 × 10⁻⁷) / (1.96)≈ 2.70 × 10⁻⁵ T (approximately)

For the second wire: The wire is perpendicular to the xy plane, passes through the point (0, 4.2 m, 0), and carries a current of 52 A in the positive z direction.

Therefore, I₂ = 52 A, L₂ = ∞, and r₂ = 4.2 m.

So, the magnetic field due to the second wire is,B₂ = (μ₀/4π) (I₂ L₂) / r₂= (4π×10⁻⁷ × 52) / (4π × 4.2)= (52 × 10⁻⁷) / (4.2)≈ 1.24 × 10⁻⁵ T (approximately)

The magnitude of the resulting magnetic field at the point (0, 1.4 m, 0) is the vector sum of B₁ and B₂ at that point and can be calculated as,

B = √(B₁² + B₂²)= √[(2.70 × 10⁻⁵)² + (1.24 × 10⁻⁵)²]= √(7.8735 × 10⁻¹¹)≈ 8.87 × 10⁻⁶ T (approximately)

To know more about magnitude:

https://brainly.com/question/28714281

#SPJ11

The firefighter must go approximately 0.16225 of the ladder's length up the ladder to put it on the verge of sliding.

To determine the distance up the ladder that the firefighter must go to put the ladder on the verge of sliding, we need to find the critical angle at which the ladder is about to slide. This critical angle occurs when the frictional force at the base of the ladder is at its maximum value and is equal to the gravitational force acting on the ladder.

The gravitational force acting on the ladder is given by:

F_gravity = m × g,

where

The frictional force at the base of the ladder is given by:

F_friction = Hs × N,

where

The normal force N can be found by considering the torques acting on the ladder. Since the ladder is in equilibrium, the torques about the center of mass must sum to zero. The torque due to the normal force is equal to the weight of the ladder acting at its center of mass:

τ_N = N × (L/3) = m × g * (L/2),

where

Simplifying the equation, we find:

N = (2/3) × m × g.

Substituting the expression for N into the equation for the frictional force, we have:

F_friction = Hs × (2/3) × m × g.

To determine the critical angle, we equate the frictional force to the gravitational force:

Hs × (2/3) × m × g = m × g.

Simplifying the equation, we find:

Hs × (2/3) = 1.

Solving for Hs, we get:

Hs = 3/2.

Now, to find the distance up the ladder that the firefighter must go, we use the fact that the tangent of the critical angle is equal to the height of the ladder divided by the distance up the ladder. Let x represent the distance up the ladder. Then:

tan(θ) = h / x,

where

Substituting the known values, we have:

tan(θ) = 8.9 / x.

Using the inverse tangent function, we can solve for θ:

θ = arctan(8.9 / x).

Since we found that Hs = 3/2, we know that the critical angle corresponds to a coefficient of static friction of 3/2. Therefore, we can equate the tangent of the critical angle to the coefficient of static friction:

tan(θ) = Hs.

Setting these two equations equal to each other, we have:

arctan(8.9 / x) = arctan(3/2).

To put the ladder on the verge of sliding, the firefighter must go up the ladder until the critical angle is reached. Therefore, we want to find the value of x that satisfies this equation.

Solving the equation numerically, we find that x is approximately 1.947 meters.

To express this distance as a fraction of the ladder's length, we divide x by the ladder length L:

fraction = x / L = 1.947 / 12.0 = 0.16225.

Therefore, the firefighter must go approximately 0.16225 of the ladder's length up the ladder to put it on the verge of sliding.

To learn more about gravitational force, Visit:

https://brainly.com/question/29328661

#SPJ11

A. The distant mountain on the retina, which is at the back of the eye opposite the cornea is 3.54 mm.

A human eye is around 25.0 mm in depth.

Given that the radius of curvature of the cornea of the eye is 0.58 cm, the distance from the cornea to the retina is around 2 cm, and the index of refraction of the aqueous humor behind the cornea is 1.35. Using the thin lens formula, we can calculate the position of the image.

1/f = (n - 1) [1/r1 - 1/r2] The distance from the cornea to the retina is negative because the image is formed behind the cornea.

Rearranging the thin lens formula to solve for the image position:

1/25.0 cm = (1.35 - 1)[1/0.58 cm] - 1/di

The image position, di = -3.54 mm

Thus, the distant mountain on the retina, which is at the back of the eye opposite the cornea, is 3.54 mm.

B. The distance between the computer screen and the eye is 250 cm, which is far greater than the focal length of the eye (approximately 1.7 cm). When an object is at a distance greater than the focal length of a lens, the lens forms a real and inverted image on the opposite side of the lens. Therefore, if the cornea focused the mountain correctly on the retina as described in part A, it would not be able to focus the text from a computer screen on the retina.

C. The cornea of the eye has a radius of curvature of about 5.00 mm. The lens formula is used to determine the image location. When an object is placed an infinite distance away, it is at the focal point, which is 17 mm behind the cornea.Using the lens formula:

1/f = (n - 1) [1/r1 - 1/r2]1/f = (1.35 - 1)[1/5.00 mm - 1/-17 mm]1/f = 0.87/0.0001 m-9.1 m

Thus, the cornea of the eye focuses the mountain approximately 9.1 m away from the eye.

Learn more about lenses here: https://brainly.com/question/9757866

#SPJ11

The question asks which of the given graphs (labeled A, B, C, D) would be obtained when the intensity of the light used in a photoelectric experiment is increased, based on the original graph showing the stopping potential vs. frequency of the incident light.

When the intensity of the incident light in a photoelectric experiment is increased, the number of photons incident on the surface of the photocathode increases. This, in turn, increases the rate at which electrons are emitted from the surface. As a result, the stopping potential required to prevent electrons from reaching the collector will decrease.

Looking at the options provided, the graph that would be obtained when the intensity of the light is increased is likely to show a lower stopping potential for the same frequencies compared to the original graph (dashed line). Therefore, the correct answer would be graph (c) since it shows a lower stopping potential for the same frequencies as the original graph. Graphs (a), (b), and (d) do not exhibit this behavior and can be ruled out as possible options.

Learn more about Graph:

https://brainly.com/question/17267403

#SPJ11

The teapot containing boiling water will radiate significantly more heat than the teapot with water at X degrees Celsius due to the higher temperature.

Question:

A metal teapot contains boiling water, while another identical teapot contains water at X degrees Celsius. How much more heat radiates away from the teapot with boiling water compared to the one with water at X degrees Celsius?

Answer:

The amount of heat radiated by an object is directly proportional to the fourth power of its absolute temperature. Since boiling water is at a higher temperature than water at X degrees Celsius, the teapot containing boiling water will radiate significantly more heat compared to the teapot with water at X degrees Celsius.

Learn more about temperature:

https://brainly.com/question/27944554

#SPJ4

The conditions for simple harmonic motion are:

I. The frequency must be constant.

II. The restoring force is in the opposite direction to the displacement.

Simple harmonic motion (SHM) refers to the back-and-forth motion of an object where the force acting on it is proportional to its displacement and directed towards the equilibrium position. The conditions mentioned above are necessary for an object to exhibit simple harmonic motion.

I. The frequency must be constant:

In simple harmonic motion, the frequency of oscillation remains constant throughout. The frequency represents the number of complete cycles or oscillations per unit time. For SHM, the frequency is determined by the characteristics of the system and remains unchanged.

II. The restoring force is in the opposite direction to the displacement:

In simple harmonic motion, the restoring force acts in the opposite direction to the displacement of the object from its equilibrium position. As the object is displaced from equilibrium, the restoring force pulls it back towards the equilibrium position, creating the oscillatory motion.

III. There must be an equilibrium position:

The third condition is incomplete in the provided statement. However, it is crucial to mention that simple harmonic motion requires the presence of an equilibrium position. This position represents the point where the net force acting on the object is zero, and it acts as the stable reference point around which the object oscillates.

The conditions for simple harmonic motion are that the frequency must be constant, and the restoring force must be in the opposite direction to the displacement. Additionally, simple harmonic motion requires the existence of an equilibrium position as a stable reference point.

To know more about harmonic motion ,visit:

https://brainly.com/question/26114128

#SPJ11

The wave equation for the displacement y as a function of x and time t can be expressed as y(x, t) = A sin(kx - ωt),

where A represents the displacement amplitude, k is the wave number, x is the position along the x-axis, ω is the angular frequency, and t is the time.

To derive the wave equation, we start with the general form of a sinusoidal wave, which is given by y(x, t) = A sin(kx - ωt). In this equation, A represents the displacement amplitude, which is given as 0.1 m in the y direction.

The wave equation describes the behavior of the wave as it propagates along the x-axis from left to right. The term kx represents the spatial variation of the wave, where k is the wave number that depends on the wavelength, and x is the position along the x-axis. The term ωt represents the temporal variation of the wave, where ω is the angular frequency that depends on the frequency of the wave, and t is the time.

By combining the spatial and temporal variations in the wave equation, we obtain y(x, t) = A sin(kx - ωt), which represents the displacement of the wave as a function of position and time.

To know more about wave equations  click here: brainly.com/question/12931896

#SPJ11

The statement "Atoms are so small that millions of them could fit across the period at the end of this sentence" best describes the sizes of atoms

Atoms are the fundamental building blocks of matter and are incredibly tiny They consist of a nucleus at the center made up of protons and neutrons with electrons orbiting around it The size of an atom is typically measured in terms of its diameter

They are said to be smallest pasrticles that make up matter. Hence we have to conclude that toms are so small that millions of them could fit across the period at the end of this sentence" best describes the sizes of atoms

Read more on atoms here https://brainly.com/question/17545314

#SPJ4

This statement is False.

The sum of the blocks' kinetic and potential energies is not necessarily equal before and after a collision. In a collision, the kinetic energy of the system can change due to the transfer of energy between the blocks. When the blocks collide, there may be an exchange of kinetic energy as one block accelerates while the other decelerates or comes to a stop. This transfer of energy can result in a change in the total kinetic energy of the system.

Furthermore, the potential energy of the system is associated with the position of an object relative to a reference point and is not typically affected by a collision between two blocks. The potential energy of the blocks is determined by factors such as their height or deformation and is unrelated to the collision dynamics.

Overall, the sum of the blocks' kinetic and potential energies is not conserved during a collision. The kinetic energy can change due to the transfer of energy between the blocks, while the potential energy remains unaffected unless there are external factors involved.

To know more about collision refer here: https://brainly.com/question/4322828#

#SPJ11

12.08 g * 21.6 cm = M * 31.9 cm

M = (12.08 g * 21.6 cm) / 31.9 cm

M ≈ 8.20 g

The mass of the meter stick is approximately 8.20 grams.

Let's denote the mass of the meter stick as M (in grams).

To determine the mass of the meter stick, we can use the principle of torque balance. The torque exerted by an object is given by the product of its mass, distance from the fulcrum, and the acceleration due to gravity.

Considering the equilibrium condition, the torques exerted by the coins and the meter stick must balance each other:

Torque of the coins = Torque of the meter stick

The torque exerted by the coins is calculated as the product of the mass of the coins (2 * 6.04 g) and the distance from the fulcrum (21.6 cm). The torque exerted by the meter stick is calculated as the product of the mass of the meter stick (M) and the distance from the fulcrum (31.9 cm).

(2 * 6.04 g) * (21.6 cm) = M * (31.9 cm)

Simplifying the equation:

12.08 g * 21.6 cm = M * 31.9 cm

M = (12.08 g * 21.6 cm) / 31.9 cm

M ≈ 8.20 g

Therefore, the mass of the meter stick is approximately 8.20 grams.

Learn more about torque:

https://brainly.com/question/17512177

#SPJ11

Millikan's experiment established the fundamental charge of the electron to be 1.592 x 10-19 coulombs, which is now defined as the elementary charge.

The direction of the electric field that helps an oil drop remain stationary when the net charge on it is negative is upwards. This occurs due to the interaction between the electric field and the negative charges on the oil droplet.

Millikan oil-drop experiment, which is a measurement of the elementary electric charge by American physicist Robert A. Millikan in 1909, was the first direct and reliable measurement of the electric charge of a single electron.

The following are some points to keep in mind during the Millikan Oil Drop Experiment:

Oil droplets are produced using an atomizer by spraying oil droplets into a container.

When oil droplets reach the top, they are visible through a microscope.

A uniform electric field is generated between two parallel metal plates using a battery.

The positively charged upper plate attracts negative oil droplets while the negatively charged lower plate attracts positive oil droplets. 

The oil droplet falls slowly due to air resistance through the electric field.

As a result of Coulomb's force, the oil droplet stops falling and remains stationary. The upward electric force balances the downward gravitational force. From this, the amount of electrical charge on the droplet can be calculated.

Millikan's experiment established the fundamental charge of the electron to be 1.592 x 10-19 coulombs, which is now defined as the elementary charge.

To know more about fundamental charge of the electron, visit:

https://brainly.com/question/32913598

#SPJ11

When an oil drop has a negative net charge, the electric field that helps it stay stationary is in the upward direction.

Thus, The interaction between the electric field and the oil droplet's negative charges causes this to happen.

The first direct and accurate measurement of the electric charge of a single electron was made in 1909 by American physicist Robert A. Millikan using his oil-drop experiment to detect the elementary electric charge.

When conducting the Millikan Oil Drop Experiment, bear the following in mind. Using an atomizer, oil droplets are sprayed into a container to create oil droplets. Oil droplets are visible under a microscope once they have risen to the top. Between two people, a consistent electric field is created.

Thus, When an oil drop has a negative net charge, the electric field that helps it stay stationary is in the upward direction.

Learn more about Electric field, refer to the link:

https://brainly.com/question/11482745

#SPJ4

Resolve the applied force F into its components parallel and perpendicular to the floor. The magnitude of the acceleration of the mop head can be calculated using the following steps:

F_parallel = F * cos(θ)

F_perpendicular = F * sin(θ)

Calculate the frictional force acting on the mop head.

f_friction = μ * F_perpendicular

Determine the net force acting on the mop head in the horizontal direction.

F_net = F_parallel - f_friction

Use Newton's second law (F_net = m * a) to calculate the acceleration.

a = F_net / m

Substituting the given values into the equations:

F_parallel = 41.9 N * cos(49.3°) = 41.9 N * 0.649 = 27.171 N

F_perpendicular = 41.9 N * sin(49.3°) = 41.9 N * 0.761 = 31.8489 N

f_friction = 0.330 * 31.8489 N = 10.5113 N

F_net = 27.171 N - 10.5113 N = 16.6597 N

a = 16.6597 N / 2.35 kg = 7.0834 m/s²

Therefore, the magnitude of the acceleration of the mop head is approximately 7.08 m/s².

Summary: a = 7.08 m/s²

To learn more about acceleration click here.

brainly.com/question/31946450

#SPJ11

According to you, the time taken for the passenger to throw the ball up and catch it is 9/25 s (Option A).

To calculate the time dilation experienced by the passenger on the moving train, we can use the time dilation formula:

Δt' = Δt / γ

Where:

Δt' is the time measured by the passenger on the train

Δt is the time measured by an observer at rest (you, in this case)

γ is the Lorentz factor, which is given by γ = 1 / √(1 - v²/c²), where v is the velocity of the train and c is the speed of light

Given:

v = (4/5)c (velocity of the train)

Δt' = 3/5 s (time measured by the passenger)

First, we can calculate the Lorentz factor γ:

γ = 1 / √(1 - v²/c²)

γ = 1 / √(1 - (4/5)²)

γ = 1 / √(1 - 16/25)

γ = 1 / √(9/25)

γ = 1 / (3/5)

γ = 5/3

Now, we can calculate the time measured by you, the observer:

Δt = Δt' / γ

Δt = (3/5 s) / (5/3)

Δt = (3/5)(3/5)

Δt = 9/25 s

Therefore, according to you, the time taken for the passenger to throw the ball up and catch it is 9/25 s (Option A).

Read more about Time Dilation here: https://brainly.com/question/3747871

#SPJ11

Given data: Initial electric field, E = 0 N/CFinal electric field, E' = 1700 N/C Increase in electric field, ΔE = E' - E = 1700 - 0 = 1700 N/CTime taken, t = 2.50 s.

The magnitude of the induced magnetic field B around a circular area with a diameter of 0.540 m oriented perpendicularly to the electric field can be calculated using the formula: B = μ0I/2rHere, r = d/2 = 0.270 m (radius of the circular area)We know that, ∆φ/∆t = E' = 1700 N/C, where ∆φ is the magnetic flux The magnetic flux, ∆φ = Bπr^2Therefore, Bπr^2/∆t = E' ⇒ B = E'∆t/πr^2μ0B = E'∆t/πr^2μ0 = (1700 N/C)(2.50 s)/(π(0.270 m)^2)(4π×10^-7 T· m/A)≈ 4.28×10^-5 T Therefore, b = 4.28 x 10^-5 T2.

In the given problem, the angle of incidence is φ = 43.40°, depth of the fish is H = 0.9500 m, and height of the thrower is h = 1.150 m. The angle decrease α needs to be calculated. Using Snell's law, we can write: n1 sin φ = n2 sin θwhere n1 and n2 are the refractive indices of the first medium (air) and the second medium (water), respectively, and θ is the angle of refraction. Using the given data, we get:sin θ = (n1 / n2) sin φ = (1.000 / 1.330) sin 43.40° ≈ 0.5234θ ≈ 31.05°From the figure, we can write:tan α = H / (h - H) = 0.9500 m / (1.150 m - 0.9500 m) = 1.9α ≈ 63.43°Therefore, the angle decrease α is approximately 63.43°.So, a = 63.43 degrees.

To know more about electric visit:

https://brainly.com/question/31173598

#SPJ11