An iron is supplied with a current of 3 A from the mains. The resistance of the iron is 1000
Calculate the power of the iron.

Answer:

[tex]0.84\:\text{s}[/tex]

Explanation:

The impulse-momentum theorem states that the impulse on an object ([tex]F\Delta t[/tex]) is equal to the change in momentum of that object ([tex]\Delta p[/tex]).

Set up the following equation:

[tex]F\Delta t=\Delta p[/tex]

Solving for change in momentum:

The momentum of an object is equal to [tex]p=mv[/tex], where [tex]m[/tex] is the mass of the object and [tex]v[/tex] is the velocity of the object. Since the person's final velocity will be zero, their final momentum will also be zero. Therefore, the person's change in momentum is [tex]68\cdot 27-0=1836\:\text{kgm/s}[/tex].

Solving for time:

[tex]2180\cdot\Delta t = 1836,\\\Delta t =\frac{1836}{2180},\\\Delta t =\boxed{0.84\:\text{s}}[/tex]

Answer:

If the engineers know that the

If the engineers know that themaximum force that a person can safely withstand is 2180 N, approximately, 0.84 second is required to crumple the barrier to safely slow the person

is required to crumple the barrier to safely slow the personwith this force.

Answer:

human activity at night

Explanation:

just did it

Answer: No

The Law of Conservation infers that the matter within a system will perserve its quantity (less there's an outside factor which disrupts the system). There should be more Cl within the products side of the equation, and more Br within the reactants side (there should be general adjustment to make this problem balanced), so that the matter is equal in quantity within both sides of the equation.

Answer:

C. Particles that make up a nucleus

Explanation:

A P E X

Answer:

Environmental Protection Agency (EPA)

Explanation:

In the United States of America, the agency which was established by US Congress and saddled with the responsibility of overseeing all aspects of pollution, environmental clean up, pesticide use, contamination, natural resources and hazardous waste spills is the Environmental Protection Agency (EPA). Also, EPA research solutions, policy development, and enforcement of regulations through the resource Conservation and Recovery Act.

The Environmental Protection Agency (EPA) is the governmental agency set up to ensure that various industries, factories and people comply with laws and regulations concerning the environment i.e it is an agency established to oversee and enforce environmental compliance by the people.

Hence, the Environmental Protection Agency (EPA) is saddled with the responsibility of enforcing federal and state laws related to environmental and natural resources.

Answer:

2

Explanation:

Answer:

If the potential energy change of each cart is the same, then the total mechanical energy change is the same for each cart

Explanation:

Hills look steeper when standing back from the edge so that gaze is nearly parallel to the surface of the hill. When optical slant (the angle between the center of gaze and the surface) is small, surface orientation is pulled toward the direction of gaze

That depends on the values of the resistors.

If the same two resistors are used in both cases, then the total resistance is more in series and less in parallel.

Here's a catchy little factoid for ya:

-- In series, the total resistance is more than the biggest single one.

-- In parallel, the total resistance is less than the smallest single one.

Answer:

I believe the answer would be kinetic energy to thermal energy.

Explanation:

Thermal energy is the heat of the brakes, and the kinetic energy would be when the car is in motion before stopping.

Answer:

Refraction is the correct option

Answer: refraction

Explanation: it is the bending of light rays as it moves from one medium to another.

Explanation:

m = 66 kg

a = 2 m/s²

F = .....?

= 66 . 2

= 132 N

Answer:

Resistors restrict current flow through a circuit.

(The electrons don't easily get from one side to the other)

High voltage is actually needed for to send power over long distances because if you use high current, a lot of the power is lost to the resistance in the wires.

Explanation:

hope it helps <3

P = 5 watt

Explanation:

P = VI

= (10 volt)(0.5 A)

= 5 watt

The electric power developed by the lamp will be 5 watts. Electric power is found by the multiplication of voltage and electric current.

Electric power is the product of the voltage and current. Its unit is the watt.

The given data in the problem is;

The voltage is,V = 10 volt (V)

The electric current is,I = 0.5 ampere (A)

The formula for the power is given as;

[tex]\rm P= V I \\\\\ P= 10 \times 0.5 \\\\ P= 5 \ watt[/tex]

Hence electric power developed by the lamp will be 5 watts.

To learn more about the electric power refer to the link;

https://brainly.com/question/12316834

Answer:

the distance should be changed by a factor of √2

Explanation:

The attractive force between the couples can be given by Newton's Law of Gravitation:

[tex]F =\frac{Gm_1m_2}{r^2}[/tex]

where,

F = Attractive Force

G = Universal Gravitational Constant

m₁ = mass of the first person

m₂ = mass of the second person

r = distance between them

Now, if we want to halve the force without changing masses, hen:

[tex]F' = \frac{1}{2} F = \frac{1}{2} \frac{Gm_1m_2}{r^2}\\\\F' = \frac{1}{2} F = \frac{Gm_1m_2}{(\sqrt{2}r)^2}[/tex]

Hence, it is clear that the distance should be changed by a factor of √2

Answer:

no it doesn't

Explanation:

Answer:

D. elliptical galaxy

Explanation:

Hope this helps :)

Answer:

Explanation:

a) Magnification = image height / object height = -9 / 18 = -0.5

b) Magnification = - image distance / object distance = -0.5

so image distance = 0.5 object distance

1/focal length = 1/image distance + 1/object distance

1/6 = 1/(0.5 object distance) + 1/object distance

object distance = 18.0 cm

c) Image appears behind the lens.

Answer:

Explanation:

mag = ht i/ht o = -9/18 = -1/2

mag = -1/2 = -di/do

do = 2di

put in eqn

1/f = 1/di + 1/do

1/6 = 1/di + 1/2di

2di = 18

do = 18cm

image is behind lens

Answer:

The correct answer is - oxygen.

Explanation:

Cardiovascular endurance is the ability to do physical activity or exercise without affecting or being tired for a longer time period. Aerobic exercise or activity can help to increase cardiovascular endurance.

Improving the cardiovascular system helps in delivering oxygen as per the demands with the help of the heart that pumps the oxygen-rich blood to different organs of an individual and lungs by inhaling enough oxygen.

Answer:

Drag; water.

Explanation:

Friction can be defined as a force that resists the relative motion of two objects when there surface comes in contact. Thus, it prevents two surface from easily sliding over or slipping across one another. Also, friction usually reduces the efficiency and mechanical advantage of machines but can be reduced through lubrication.

Generally, there are four (4) main types of friction and these includes;

I. Static friction.

II. Rolling friction.

III. Sliding friction.

IV. Fluid friction.

Fluid friction can be defined as a type of friction that acts on physical objects moving through a liquid or gas. A fluid refers to any physical substance that can flow and is able to take the shape of a container.

In science, matter can be defined as anything that has mass and occupies space. Any physical object that is found on earth is typically composed of matter. Matter are known to be made up of atoms and as a result has the property of existing in states.

Basically, matter exists in three (3) distinct or classical phases and these are; solid, liquid and gas.

Generally, friction applies to all states of matter; in the gaseous state, it is called drag resistance and in a liquid it's called water resistance.

1/do + 1/di = 1/f

blah blah blah why does the answer have to be 20 characters long

[tex] \mathfrak{\huge{ \mathfrak{  \underline{ Answer }}}\:  ✓ }[/tex]

We know, hot water has more energy than the cold water , so when cold water is added in the beaker then heat transfer occurs from hot water to cold water to balance the Energy, causing the drop of temperature from 70° C to 40° C.

Note : Heat transfers occurs from hotter object to cooler one.

_____________________________

[tex] \mathrm{ \#TeeNForeveR}[/tex]

Answer:

B

Explanation:

Answer:

infrared will do but I'm not sure this question is hard if I may say and we cannot take green because it is the colour that the concept must have

Answer:

D

Explanation:

Answer:

Wheel and axle consists of two coaxial cylinders of different diameters. Various examples of wheel and axle are used in our daily life. Some examples of such wheel and axles are string-roller, screwdriver, MADANI, ROTE PING, spanners, knobs of a door, steering of vehicles etc. Most of them are used for magnifying effort but some are also used to gain speed like MADANI and ROTE PING. In wheel and axles, usually effort is applied on big cylinder called wheel and is overcome bya small cylinder called axle.

Answer:

Explanation: The wheel and axle

a machine consisting of a wheel attached to a smaller axle so that these two parts rotate together in which a force is transferred from one to the other.

Answer: See explanation

Explanation:

According to clinical psychology, an abnormal behavior is when an act results in a significant distress and is deviant from the normal practice.

In this case, while the whole class is cheating, one student isn't. This shows that the student is deviating from what every other person is doing. Since the student deviates from the norm, it's an abnormal behavior.

Answer:

The reason he might be exhibiting abnormal behavior is the fact that everyone except him is cheating on a test. He is the odd one out and due to this he might be anxious/nervous. Perhaps he thinks that since he is the only one not cheating that he might get a bad grade cause the teacher will assume he is cheating aswell. Another might be that he does not like being singled out. It's out of the norm and he does not particularly like it.

Explanation:

Take this and alter it to your liking. It got me a 100%!

Answer:

R2 = 300 Ohms

Explanation:

Let the two resistors be R1 and R2 respectively.

RT is the total equivalent resistance.

Given the following data;

R1 = 100 Ohms

RT = 75 Ohms

To find R2;

Mathematically, the total equivalent resistance of resistors connected in parallel is given by the formula;

[tex] RT = \frac {R1*R2}{R1 + R2} [/tex]

Substituting into the formula, we have;

[tex] 75 = \frac {100*R2}{100 + R2} [/tex]

Cross-multiplying, we have;

75 * (100 + R2) = 100R2

7500 + 75R2 = 100R2

7500 = 100R2 - 75R2

7500 = 25R2

R2 = 7500/25

R2 = 300 Ohms