Answer:
[tex]40^{\circ}[/tex]
Explanation:
The incident angle is [tex]20^{\circ}[/tex] so the reflected ray will also be [tex]20^{\circ}[/tex].
The normal divides the angle between the incident and reflected ray. So, the angle between them would be
[tex]\text{Incident angle}+\text{Reflected angle}=20+20=40^{\circ}[/tex]
So, the angle between the incident and reflected rays is [tex]40^{\circ}[/tex].
Will most likely cause the formation of a Mountain
A. Divergent boundary
B. Convergent boundary
C. Transform boundary
Answer:
Convergent boundaries. When two plates collide and one is pushed over the other, forming a mountain.
Why is the air temperature shown on Sensor 4 different from Sensor 5, even though they are at the same latitude?
Answer:
Hello your question lacks some information but i will give you a more General answer about differences in temperature of bodies on same latitude
answer : Continentality is the reason
Explanation:
Sensors or objects on the same latitude are supposed to have the same air temperatures but in some cases this might not be true. This is because of the proximity of the bodies to an Ocean or any water body.
Areas close to water bodies experience modest temperatures even if they are on the same latitude with Areas experiencing harsh temperatures. This effect is termed as Continentality
PLZ HELP ILL GIVE BRAINLIEST
Answer:
x10 - 6 +(8+6-4)= 10
10m -10x y0
Suppose to a scientist was able to construct a barometer with a liquid being twice denser than mercury, then how would the liquid raise at standard pressure?
Answer:
h = h₀/2, the liquid column rises half the height
Explanation:
Pressure is defined as force per area,
P = F / A
in a barometer the force is the weights of the liquid column
F = W = mg
P = m g/A
if we use the definition of density
ρ = [tex]\frac{m}{A h}[/tex]
[tex]\frac{m}{A}[/tex] = ρ h
we substitute
P = ρ g h
Let's use the index o for the mercury
P₀ = ρ₀ g h₀
when we change the liquid for another with
ρ = 2ρ₀
the pressure expression is
P = 2ρ₀ g h
in the problem they indicate that the pressure is equal to the initial P = P₀
we substitute
ρ₀ g h₀ = 2ρ₀ g h
h₀ = 2h
h = h₀/2
the liquid column rises half the height
In what way are all sound waves and light waves similar?
Answer:
Sound and light are similar in that both are forms of energy that travel in waves. They both have properties of wavelength, freqency and amplitude. Here are some differences: Sound can only travel through a medium (substance) while light can travel through empty space.
Answer:
Sound and light are similar in that both are forms of energy that travel in waves. They both have properties of wavelength, freqency and amplitude. Here are some differences: Sound can only travel through a medium (substance) while light can travel through empty space.
Explanation:
Hope this helped Mark BRAINLEST
Grant sprints 50 m to the right with an average velocity of 3.0 m/s how many seconds did grant sprint
Answer:
The time is 16.667 seconds
Explanation:
Velocity is a physical quantity that expresses the relationship between the space traveled by an object and the time used for it. Then, the average velocity results from the quotient between the change in position and the time taken to effect said change:
[tex]velocity=\frac{distance}{time}[/tex]
In this case:
velocity: 3 m/sdistance: 50 mtime: ?Replacing:
[tex]3 \frac{m}{s} =\frac{50 m}{time}[/tex]
Solving:
[tex]time =\frac{50 m}{3 \frac{m}{s}}[/tex]
time= 16.667 seconds
The time is 16.667 seconds
Grant sprints 50 m o the right with an average velocity of 3.0 m/s.
How many seconds did Grant sprint?
Answer: 16.667
Se calienta para templar y endurecer, una llave española de acero de 200 gramos, elevando su temperatura hasta los 550°C y se introduce dentro de un recipiente de aluminio de 250 gramos de masa que contiene 220 gramos de agua. A 18°C. Determinar la temperatura final, cuando se alcanza el equilibrio térmico. Considere El CeHierro= 0.499cal/g°C; CeAluminio= 0.217cal/g°C; Ce agua=1cal/g°C
Answer:
La temperatura final es de aproximadamente 159,94°C
Explanation:
Los parámetros dados son;
La masa de la llave española de acero, m₁ = 200 gramos
La temperatura de la llave, T₁ = 550 ° C
La masa del recipiente de aluminio que contiene agua, m₂ = 250 gramos
La masa del agua en el recipiente de aluminio, m₃ = 220 gramos
La capacidad calorífica específica del hierro, [tex]C_{planchar}[/tex], c₁ = 0.499 ca/(g·°C)
La capacidad calorífica específica del aluminio, [tex]C_{Aluminio}[/tex], c₂ = 0.217 cal/(g·°C)
La capacidad calorífica específica del agua, [tex]C_{Agua}[/tex], c₃= 1 cal/(g·°C)
En equilibrio térmico, tenemos;
m₁·c₁·(T₁ - T) = m₂·c₂·(T -T₂) + m₃·c₃·(T - T₂)
Conectando los valores, da;
200 × 0.499 × (550 - T) = 250 × 0.217 × (T -18) + 220 × 1 × (T - 18)
Simplificando, usando una calculadora gráfica, obtenemos;
[tex]\dfrac{274450-499\cdot T}{5} = \dfrac{1097 \cdot T-19746}{4}[/tex]
De también encontramos 'T' al convertirlo en el tema de la ecuación anterior aún usando una calculadora gráfica;
T = 1196530/7481 °C ≈ 159.94°C
La temperatura final,T ≈ 159.94°C.
The final temperature, when thermal equilibrium is reached is 144°C.
Given the following data:
Mass of key = 200 gramsFinal temperature of key = 550°CMass of aluminum = 250 gramsMass of water = 220 gramsInitial temperature of water = 18°CSpecific heat capacity of key = 0.499 cal/g°CSpecific heat capacity of aluminum = 0.217 cal/g°CSpecific heat capacity of water = 1 cal/g°CTo determine the final temperature, when thermal equilibrium is reached:
Mathematically, heat capacity or quantity of heat is given by the formula;
[tex]Q = mc\theta[/tex]
Where:
Q represents the quantity of heat.m represents the mass of an object.c represents the specific heat capacity.∅ represents the change in temperature.At an equilibrium state, the quantity of heat for the three substances is given by the equation:
[tex]M_kC_k(\theta_2 - \theta_1) = M_aC_a(\theta_2 - \theta_1) + M_wC_w(\theta_2 - \theta_1)\\\\200 \times 0.499 \times (500 - \theta_2) = 250 \times 0.217 \times (\theta_2 - 18) + 220 \times 1 \times (\theta_2 - 18)\\\\99.8(500 - \theta_2) = 54.25(\theta_2 - 18) + 220(\theta_2 - 18)\\\\49900 -99.8\theta_2 = 54.25\theta_2 - 976.5 + 220\theta_2 - 3960\\\\220\theta_2 + 99.8\theta_2 + 54.25\theta_2 = 49900 + 3960\\\\374.05\theta_2 = 53860\\\\\theta_2 = \frac{53860}{374.05}[/tex]
Final temperature, [tex]\theta_2[/tex] = 143.99 ≈ 144°C
Read more: https://brainly.com/question/18877825
what is the total energy a 60W incandescent light bulb in KWh will consume in 336 hours?
(60 W) x (336 hrs) = 20,160 W-hr
That's 20.16 KWh .
If it takes 3.5 hours for a train to travel between two cities at a velocity of 120 miles/hr, what is the distance between the two cities?
Answer:
120 mph is 193.1 km/hrs.
distance is s = vt.
193.1*3.5 = 675.85 km
Answer:
420 miles
Explanation:
Time: 3.5 hrs
Velocity: 120 miles/hr
Now Distance= Speed × Time
Distance = 3.5 × 120 = 420 miles
how can you show that an electric current has a magnet affect
Answer:
It is observed that when a compass is brought near a current carrying conductor the needle of compass gets deflected because of flow of electricity. This shows that electric current produces a magnetic effect.
Which statement correctly describes the relationship between air temperature and air pressure?
-Warm air rises, creating an area of low pressure.
-Cool air sinks, creating an area of low pressure.
-Warm air sinks, creating an area of low pressure.
-Cool air rises, creating an area of low pressure.
PLS HELP ME FAST I NEED TO DO IT NOW
I WILL GIVE YOU 45 POINT
Answer:
A) so the conditions for the expirament don’t affect the outcome
b) to make sure the results are conclusive and accurate
Explanation:
One mole of titanium contains how many atoms?
O A. 60.2 x 1024
O B. 6.02 x 10-23
O C. 1.0
O D. 6.02 x 1023
SUBMIT
Answer:
[tex]\boxed {\boxed {\sf D. \ 6.02*10^{23} \ atoms}}[/tex]
Explanation:
One mole of a substance contains the same amount of representative particles. These particles can be atoms, molecules, ions, or formula units. In this case, the particles are atoms of titanium.
Regardless of the particles, there will always be 6.02*10²³ (also known as Avogadro's Number) particles in one mole of a substance.
Therefore, the best answer for 1 mole of titanium is D. 6.02*10²³ atoms.
Answer:
D) 6.02 x 1023
Explanation:
A.P.E.X
Assignment: Can you identify various forces and instances in which electrostatic and magnetic forces occur
Answer:
Magnetic force, attraction or repulsion that arises between electrically charged particles because of their motion. It is the basic force responsible for such effects as the action of electric motors and the attraction of magnets for iron. Electric forces exist among stationary electric charges; both electric and magnetic forces exist among moving electric charges. The magnetic force between two moving charges may be described as the effect exerted upon either charge by a magnetic field created by the other.
TRUE OR FALSE, PLEASEE HELPPP ASAP
6) The amount of work done on an object depends on the final speed of the object
7) 1 Horsepower (hp) is equal to 746 Watts.
8) The SI unit for Work is the Joule.
9) The lower the percentage, the better the efficiency
10) The Work-Energy theorem states that the change in kinetic energy also equals the amount of work done on an object or system.
Answer: You do not deserve help, You dont help other people you only use them for points so...do not ask for help from us now
Explanation:
Please help Solve! I need help!
Question:
Jermaine runs exactly 2 laps around a 400-meter track. What is the displacement?
Multiple choice answers (I need help I don't understand I don't know what the answer is PLEASE HELP ME):
a. 200
b. 800
c. 400
d. 0
D
Explanation
Given,
Distance covered in 1 lap = 400m
= Distance covered in 2 laps = 400 × 2
=800m
If Jermaine runs 2 whole laps, she comes back to her starting point.
So the answer is 0m
What causes the pressure in a fluid
Answer:
The pressure in a liquid is due to the weight of the column of water above. Since the particles in a liquid are tightly packed, this pressure acts in all directions. For example, the pressure acting on a dam at the bottom of a reservoir is greater than the pressure acting near the top.
Answer:
Fluid pressure can be caused by gravity, acceleration, or forces in a closed container. Since a fluid has no definite shape, its pressure applies in all directions.
Explanation:
The public is not yet able to purchase cars powered by hydrogen fuel cells because engineers have to determine how
the cars perform based on which scenario?
O on racetracks
O in real-world conditions
O in flooded environments
O on closed courses
Next
Submit
Save and Exit
return
Answer:
B on EDGE
Explanation:
A uniform electric field exists in a region between two oppositely charged plates. An electron is released from rest at the surface of the negatively charged plate and strikes the surface of the opposite plate, 2.0 cm away, in a time 1.5 x 10-8 s. The speed of the electron in millions m/sec as it strikes the second plate is: A. 13.3 B. 133 C. 2.67 D. 26.7 E. 534
Answer:
A. 13.3
Explanation:
First, we find the velocity of the electron in meters/sec, as follows:
[tex]v = \frac{d}{t}\\[/tex]
v = velocity of electron = ?
d = distance between plates = 2 cm = 0.02 m
t = time elapsed = 1.5 x 10⁻⁸ s
Therefore, using these values in the equation, we get:
[tex]v = \frac{0.02\ m}{1.5\ x\ 10^{-8}\ s}\\\\v = 1333333.33\ m/s[/tex]
Now, we convert this to million m/s:
[tex]v = (1333333.33\ m/s)\frac{1\ million\ m}{100000\ m}\\\\v =13.3\ million\ m/s[/tex]
Therefore, the correct answer is:
A. 13.3
"True or False": Because action and reaction forces are equal in magnitude, they will produce the same acceleration in both objects involved.
True. Forces that are equal in magnitude always result in the same acceleration.
True. The same acceleration will result because the two objects are acting on each other.
False. Acceleration is dependent on the mass of the object that is accelerated.
False. Even though both objects experience an equal force, only one will accelerate.
True im not 100% sure but I tried.
How bones do humans have ??
Answer:
206
Explanation:
The axial skeleton, comprising the spine, chest and head, contains 80 bones. The appendicular skeleton, comprising the arms and legs, including the shoulder and pelvic girdles, contains 126 bones, bringing the total for the entire skeleton to 206 bones.
A fully grown adult features 26 bones in the spine, whereas a child can have 34.
Answer:
The human body is made up of 206 bones
How do scientists use patterns?
A. To organize results
B. To describe how something is made
C. To predict what might happen next
D. To send messages to other scientists
Answer:
c because you see with your eyes and c rhymes with eyes
6. Calculate the pressure exerted on an elevator floor which has an
area of 6 m², if 20 people whose combined force is 1500 N are
standing on it.
Answer:
Hope this helps you out if you could please leave 5 stars or brainiest thank you
Why is coal considered a nonrenewable resource? Check all that apply.
Coal is burned to generate electricity.
Coal power plants give off large quantities of smoke and ash.
Coal forms so slowly that we could use up the supply that exists now.
Coal is available in limited amounts.
Answer:
cola forms so slowly that we could use up the supply that exists now
Answer: c and d
Explanation:
In a tropic level, energy flows from the producer to the primary consumer and to a secondary consumer. True False
Answer:
True
Explanation:
This is true because in an energy flow, the primary producers such as plants produce their own foods by using energy from the sun. These primary producers are consumed by primary consumers such as rabbits for food, while secondary consumers such as snakes would consume the primary consumers.
By so doing, energy flows from one trophic level to the other.
How do mountains affect the climate of a region?
oints)
Two ropes are attached to a wagon, one horizontal to the west with a tension force of 30 N
and the other east and at an angle of 30° northward and a tension force of 40 N. Find the
components of the net force on the cart. Show all your work.
Answer:Assuming the two ropes are knotted onto the same point of the wagon, the net force is computed of the sum of the two stated.The westward force is Fw = (-30,0); then the northeastward force is Fne = (50*cos(30°),50*sin(30°)).Adding the two is just adding each part, so the resulting force is Fnet = (-30+50*cos(30°),50*sin(30°)).
Going more than that, the magnitude uses the Pythagorean formula:so √[(-30+50*cos(30°))²+(50*sin(30°))²] which is about 28.32N.
Explanation: justttt understanddd myy ansswerr hehezz
Cual es la rapidez media de un guepardo que recorre 100 metros en 4 segundos? ¿Y si recorre 50 m en 2 s?
Answer:
La rapidez media es 25 m/s en ambos casos.
Explanation:
Podemos definir como rapidez media al cociente entre la distancia total recorrida y el tiempo que se tardó en recorrer dicha distancia.
Así tenemos:
Rapidez media = Distancia/tiempo.
Entonces si el guepardo recorre 100m en 4 segundos, su rapidez media es:
Rapidez media = 100m/4s = 25 m/s
En el caso de que el guepardo recorre 50 metros en 2 segundos, su rapidez media será:
rapidez media = 50m/2s = 25m/s
Es el mismo resultado, pues recorrió la mitad de distancia en la mitad de tiempo.
Cynthia forgot to put the fabric softener in the wash. As her socks tumbled in the dryer, they became charged. If a small piece of lint with a charge of +1.25 E - 10 C is attracted to the socks by a force of 3.0 E - 6 N, what is the magnitude of the electric field at this location?
Answer:
E = 24000 N/C = 24 KN/C
Explanation:
The electric field experienced by a test charge is given by the following formula:
[tex]E = \frac{F}{q}\\\\[/tex]
where,
E = Electric Field = ?
F = Force of attraction = 3 x 10⁻⁶ N
q = Charge on piece of lint = 1.25 x 10⁻¹⁰ C
Therefore, using these values in the equation, we get:
[tex]E = \frac{3\ x\ 10^{-6}\ N}{1.25\ x\ ^{-10}\ C}\\\\[/tex]
E = 24000 N/C = 24 KN/C
A disk 7.90 cm in radius rotates at a constant rate of 1 190 rev/min about its central axis. (a) Determine its angular speed. 124.58 Correct: Your answer is correct. rad/s (b) Determine the tangential speed at a point 2.98 cm from its center. 3.71 Correct: Your answer is correct. m/s (c) Determine the radial acceleration of a point on the rim. magnitude 1.23 Correct: Your answer is correct. km/s2 direction toward the center Correct: Your answer is correct. (d) Determine the total distance a point on the rim moves in 2.06 s. 20.28 Correct: Your answer is correct. m
Answer:
[tex]124.62\ \text{rad/s}[/tex]
[tex]3.71\ \text{m/s}[/tex]
[tex]1.23\ \text{km/s}^2[/tex]
[tex]20.28\ \text{m}[/tex]
Explanation:
r = Radius of disk = 7.9 cm
N = Number of revolution per minute = 1190 rev/minute
Angular speed is given by
[tex]\omega=N\dfrac{2\pi}{60}\\\Rightarrow \omega=1190\times \dfrac{2\pi}{60}\\\Rightarrow \omega=124.62\ \text{rad/s}[/tex]
The angular speed is [tex]124.62\ \text{rad/s}[/tex]
r = 2.98 cm
Tangential speed is given by
[tex]v=r\omega\\\Rightarrow v=2.98\times 10^{-2}\times 124.62\\\Rightarrow v=3.71\ \text{m/s}[/tex]
Tangential speed at the required point is [tex]3.71\ \text{m/s}[/tex]
Radial acceleration is given by
[tex]a=\omega^2r\\\Rightarrow a=124.62^2\times 7.9\times 10^{-2}\\\Rightarrow a=1226.88\approx 1.23\ \text{km/s}^2[/tex]
The radial acceleration is [tex]1.23\ \text{km/s}^2[/tex].
t = Time = 2.06 s
Distance traveled is given by
[tex]d=vt\\\Rightarrow d=\omega rt\\\Rightarrow d=124.62\times 7.9\times 10^{-2}\times 2.06\\\Rightarrow d=20.28\ \text{m}[/tex]
The total distance a point on the rim moves in the required time is [tex]20.28\ \text{m}[/tex].