The volume of the air bubble just below the surface of the lake would be 0.000015 m³ = 1.5 cm³.
How do we calculate?V₁ = 1.5 cm³
P₁ = ρg(10) = (1000 kg/m³ * 9.8 m/s² * 10 m)
To convert V₁ to m³:
Volume₁ = 1.5 cm³ * (1 m / 100 cm)³ = 0.000015 m³
we then substitute the values into the equation:
Volume ₂ = 0.000015 m³ * (P₂ / (1000 kg/m³ * 9.8 m/s² * 10 m))
Pressure ₂ = ρg(10) = (1000 kg/m³ * 9.8 m/s² * 10 m)
We then substitute the value of P₂ into the equation for Volume 2:
V₂ = 0.000015 m³ * ((1000 kg/m³ * 9.8 m/s² * 10 m) / (1000 kg/m³ * 9.8 m/s² * 10 m))
Volume₂ = 0.000015 m³
Learn more about Volume at:
https://brainly.com/question/27710307
#SPJ1
Suppose you put five electrons into an infinite square well of width L.
Find an expression for the minimum energy of this system, consistent with the exclusion principle.
The minimum energy is given by E_total = 2 * E_1 + 2 * E_2 + E_3.
In an infinite square well potential, the energy levels for a single particle are given by the equation:
E_n = (n^2 * h^2) / (8 * m * L^2),
where n is the quantum number, h is Planck's constant, m is the mass of the electron, and L is the width of the well. The lowest energy level corresponds to n = 1, yielding the minimum energy for a single electron in the well.
To consider the exclusion principle, we need to ensure that each energy level can accommodate at most two electrons (one with spin-up and one with spin-down).
Therefore, the five electrons will fill the energy levels starting from the lowest and moving up, with each level accommodating two electrons.
The total minimum energy of the system is the sum of the energies of the filled energy levels. For this case, we fill the n = 1 and n = 2 energy levels completely, while only partially filling the n = 3 level to accommodate the remaining electron. Thus, the minimum energy is given by:
E_total = 2 * E_1 + 2 * E_2 + E_3,
where E_1, E_2, and E_3 are the energies of the respective energy levels. Substituting the equation for E_n into the expression above, we obtain the final expression for the minimum energy of the system consistent with the exclusion principle in the infinite square well potential.
For more such questions on energy,click on
https://brainly.com/question/13881533
#SPJ8
What is the impact of the imagery used in paragraph six on the meaning of "On a Mountain Trail"?
The impact of the imagery used in paragraph six on the meaning of "On a Mountain Trail" emphasizes the fear and uncertainty of the narrator as the pack surrounds the sleigh on the trail.
The imagery in paragraph 6 paints a vivid and powerful picture of a pack of wolves surrounding the sled. Because of the narrator's inability to count the number of wolves present, this description adds to the feeling of anxiety and uncertainty. The scene reinforces the emotional impact of the scene and helps convey the protagonist's sense of vulnerability and danger.
Therefore, the correct option is C.
Learn more about imagery, here:
https://brainly.com/question/32354003
#SPJ1
A crate with a mass of 35.0 kg is pushed with a horizontal force of 150 N. The crate moves at a constant speed across a level, rough surface a distance of 5.85 m
(a) The work done by the 150 N force is 877.5 Joules.
(b) The coefficient of kinetic friction between the crate and the surface is approximately 0.437.
To answer this problem, we must take into account the work done by the applied force as well as the work done by friction.
(a) The applied force's work may be estimated using the following formula:
Work = Force * Distance * cos(theta)
where the force is 150 N and the distance is 5.85 m. Since the force is applied horizontally and the displacement is also horizontal, the angle theta between them is 0 degrees, and the cosine of 0 degrees is 1.
As a result, the applied force's work is:
Work = 150 N * 5.85 m * cos(0) = 877.5 J
So, the work done by the 150 N force is 877.5 Joules.
(b) Frictional work is equal to the force of friction multiplied by the distance. The work done by friction is identical in amount but opposite in direction to the work done by the applied force since the crate travels at a constant speed.
The frictional work may be estimated using the following formula:
Work = Force of Friction * Distance * cos(theta)
The net force applied on the crate is zero since it is travelling at a constant pace. As a result, the friction force must be equal to the applied force, which is 150 N.
Thus, the work done by friction is:
Work = 150 N * 5.85 m * cos(180) = -877.5 J
Since the work done by friction is negative, it indicates that the direction of the frictional force is opposite to the direction of motion.
The coefficient of kinetic friction may be calculated using the following equation:
Friction Force = Kinetic Friction Coefficient * Normal Force
The normal force equals the crate's weight, which may be computed as:
Normal Force = mass * gravity
where the mass is 35.0 kg and the acceleration due to gravity is approximately 9.8 m/s^2.
Normal Force = 35.0 kg * 9.8 m/s^2 = 343 N
Now, we can rearrange the equation for the force of friction to solve for the coefficient of kinetic friction:
Force of Friction = coefficient of kinetic friction * Normal Force
150 N = coefficient of kinetic friction * 343 N
coefficient of kinetic friction = 150 N / 343 N ≈ 0.437
As a result, the kinetic friction coefficient between the container and the surface is roughly 0.437.
In summary, the work done by the 150 N force is 877.5 Joules, and the coefficient of kinetic friction between the crate and the surface is approximately 0.437.
For more such questions on work, click on:
https://brainly.com/question/8119756
#SPJ8
A box of mass 210 kg is pulled from rest with a string of tension 1300n inclined at 35° to the horizontal. if the box moved with a speed of 10m/s and frictional force between the box and surface is 100 n, calculate the distance covered.
If A box of mass 210 kg is pulled from rest with a string of tension 1300n inclined at 35° to the horizontal. if the box moved with a speed of 10m/s and the frictional force between the box and surface is 100 n, Then the distance covered by the box is 10.89 meters.
To calculate the distance covered by the box, we need to analyze the forces acting on it and apply the work-energy principle.
Given:
Mass of the box, m = 210 kg
Tension in the string, T = 1300 N
The angle of inclination, θ = 35°
Frictional force, f = 100 N
Initial speed, u = 0 m/s
Final speed, v = 10 m/s
First, let's resolve the tension force into components parallel and perpendicular to the incline. The parallel component of the tension force can be calculated as:
T_parallel = T * cos(θ)
Next, let's calculate the net force acting on the box along the incline. The net force is given by:
Net force = T_parallel - f
Now, using Newton's second law, we can calculate the acceleration (a) of the box:
Net force = m * a
From the given information, we have the final velocity (v), initial velocity (u), and acceleration (a). We can use the following kinematic equation to calculate the distance covered (s):
v^2 = u^2 + 2as
Rearranging the equation, we get:
s = (v^2 - u^2) / (2a)
Now, let's plug in the given values and calculate the distance covered:
T_parallel = 1300 N * cos(35°) ≈ 1067.35 N
Net force = 1067.35 N - 100 N = 967.35 N
a = (967.35 N) / (210 kg) ≈ 4.61 m/s^2
s = (10 m/s)^2 - (0 m/s)^2 / (2 * 4.61 m/s^2) ≈ 10.89 m
Therefore, the distance covered by the box is approximately 10.89 meters.
To learn more about Newton's law of motion click:
brainly.com/question/29775827
#SPJ1
A short tennis player hits a ball that is
r meters from their elbow with an angular acceleration
αalpha. A tall tennis player hits a ball with the same angular acceleration where the ball is
2, r from their elbow .
The tangential acceleration of the short player's ball is twice the tangential acceleration of the tall player's ball.
How does the acceleration affect the ball?The ball of the shorter player experiences twofold of the ball of the taller player's tangential acceleration. The reason behind this is that the magnitude of the tangential acceleration correlates directly with the radius of the circle.
The ball belonging to the smaller player is positioned nearer to the elbow, resulting in a decreased radius. It can be deduced from this statement that the ball of the short player experiences twice the magnitude of tangential acceleration compared to the ball of the tall player.
The answer is: ashort = 2atall
Read more about tangential acceleration here:
https://brainly.com/question/11476496
#SPJ1
The Complete Question
A short tennis player hits a ball that is r meters from their elbow with an angular acceleration a. A tall tennis player hits a ball with the same angular acceleration where the ball is 2r from their elbow. How does the tangential acceleration of the short player's ball Ashort compare with the tall player's ball a tall? Choose 1 answer: ashort 2atall ashort Otall ashort 1 atall 2
inquiry based pedagogy is being embraced in principle across the globe . in the last decade , it has been supported by an increasing body of research on its effectiveness . illustrate your understanding of the concept of inquiry based pedagogy with a relevant example.( 10 marks)
Inquiry-based pedagogy empowers students to explore, question, and construct knowledge through active engagement. It encourages curiosity, critical thinking, and independent investigation, fostering a deeper understanding of concepts and skills that extend beyond the classroom.
Inquiry-based pedagogy is an approach to teaching and learning that emphasizes the active engagement of students in the exploration of meaningful questions, problems, or phenomena. It encourages students to ask questions, investigate, and construct their own knowledge through critical thinking, problem-solving, and hands-on experiences. Here's an example to illustrate the concept of inquiry-based pedagogy:
Example: Exploring Ecosystems
In a biology class, the teacher introduces the topic of ecosystems using an inquiry-based approach. The teacher poses a driving question to the students: "How do living organisms interact with their environment to form ecosystems?"
1. Questioning and Investigation: Students begin by generating their own questions related to ecosystems. They might wonder about the roles of different organisms, energy flow, or the impact of human activities. Guided by their questions, they conduct research, gather information from various sources, and share their findings.
2. Hands-on Exploration: The teacher organizes hands-on activities to allow students to observe and explore ecosystems firsthand. For example, they could set up mini-ecosystems in terrariums or conduct field trips to local habitats. Through these experiences, students can make observations, collect data, and analyze patterns.
3. Collaborative Learning: Students work in groups or pairs to analyze the data they have collected and draw conclusions. They engage in discussions, share their ideas, and challenge each other's thinking. This collaborative learning environment promotes critical thinking, communication, and teamwork.
4. Reflection and Presentation: Students reflect on their findings and insights gained from their investigations. They are encouraged to synthesize their learning into presentations, reports, or visual representations. These presentations provide opportunities for students to articulate their understanding and demonstrate their learning outcomes.
By engaging in inquiry-based learning, students develop essential skills such as critical thinking, problem-solving, communication, and self-directed learning. They become active participants in their own education, taking ownership of their learning process and developing a deeper understanding of the subject matter.
For more such information on: pedagogy
https://brainly.com/question/32683998
#SPJ8
What is the correct answer option for question 14?
Based on the information provided in the second paragraph of "On a Mountain Trail," the correct option would be "The pack surrounding the sleigh is a very real threat to the two men on the trail." The correct option is C.
In the second paragraph, it is mentioned that the wolves had stopped running and were now "moving at a dogtrot, leisurely and methodically encircling the sleigh." This description implies that the wolves are actively surrounding the sleigh, which suggests a potential threat to the two men on the trail. The word "encircling" indicates a deliberate and coordinated action by the wolves, which implies predatory behavior.
Now let's examine why the other options are not true:
A. The surrounding pack should not be concerning to the two men.
This option is not true because the description in the paragraph clearly implies that the pack of wolves surrounding the sleigh is a cause for concern.
B. The wolves will eventually tire and will return to the safety of the underbrush.
This option is not supported by the information provided in the paragraph. There is no mention of the wolves becoming tired or retreating to the safety of the underbrush. The description implies that the wolves are actively encircling the sleigh, indicating an ongoing threat.
D. Once a sleigh is surrounded by a pack of wolves, there is no chance for human survival.
This option is an extreme statement and goes beyond the information provided in the paragraph. The paragraph does not provide any conclusive information about the chances of human survival in such a situation. It simply describes the current state of the wolves surrounding the sleigh, but it does not make a definitive statement about the outcome for the two men.
Therefore, The correct option is C.
To learn more about context clues click:
brainly.com/question/3072470
#SPJ1
Answer #49 please and thank you
when Force (N) is 10.0 Length (m) is 0.60
when Force (N) is 8.0 Length (m) is 0.40
when Force (N) is 4.0 Length (m) is 0.20
when Force (N) is 4.0 Length (m) is 0.20
when Force (N) is 2.0 Length (m) is 0.10
chatgpt
49. To find the length of a pendulum that has a period of 2.3 seconds on the Moon, where the gravitational acceleration (g) is 1.6 N/kg, we can use the formula:
Period (T) = 2π√(Length (L) / g)
Substituting the given values:
2.3 = 2π√(L / 1.6)
To solve for L, we can rearrange the formula:
L = (2.3 / (2π))^2 * 1.6
L ≈ 0.781 meters (or 78.1 centimeters)
So, the pendulum must be approximately 0.781 meters (or 78.1 centimeters) long to have a period of 2.3 seconds on the Moon.
50. Ranking Task:
To rank the pendulums according to their periods, we need to consider both the length and mass of each pendulum.
Ranking from least to greatest period:
1. A: 10 cm long, mass = 0.25 kg
2. C: 20 cm long, mass = 0.25 kg
3. B: 10 cm long, mass = 0.35 kg
There is a tie between pendulums A and C, as they have the same length but different masses.
Which statement describes a primary difference between an electromagnetic wave and a mechanical wave
The primary difference is that electromagnetic waves can propagate through a vacuum or empty space, while mechanical waves require a physical medium to transmit energy.
Difference between an Electromagnet and Mechanical WaveA primary difference between an electromagnetic wave and a mechanical wave is the medium through which they propagate.
Electromagnetic waves can propagate through a vacuum or empty space without requiring a material medium. They are generated by the oscillation and interaction of electric and magnetic fields.
Examples of electromagnetic waves include radio waves, microwaves, infrared, visible light, ultraviolet, X-rays, and gamma rays. These waves can travel through space, air, or other materials, as they do not rely on physical particles to transmit energy.
On the other hand, mechanical waves require a physical medium to propagate. They are disturbances that travel through a material medium, transferring energy from one location to another. Mechanical waves rely on the interaction and displacement of particles within the medium to transmit energy.
Examples of mechanical waves include sound waves, water waves, seismic waves, and waves on a string. These waves cannot travel through a vacuum as they depend on the physical presence and interaction of particles within the medium.
In summary, the primary difference is that electromagnetic waves can propagate through a vacuum or empty space, while mechanical waves require a physical medium to transmit energy.
Learn more about wave here:
https://brainly.com/question/15663649
#SPJ1
I need help with this question
Explanation:
a boy walks at 2m/s for 30sec and run at 5m/s for 20sec. what is his average speed
Please help me out! I will pay real money to whoever solves this
Answer:
I KNOW THE ANSWER IT WILL COST 30$
Explanation:
What is the wavelength of the standing wave?
Choose 1 answer:
From the image, the option that we should choose is option F; None of these.
What is the wavelength?
The distance between two consecutive points that are in phase or have the same displacement and are situated on either side of a standing wave is referred to as its wavelength. In other words, it represents the duration of a single wave cycle.
The length of the medium and the boundary conditions influence the wavelength for a standing wave on a string or in a medium.
Since we do not have the difference between two crests and troughs hence the answer ought to be none of these.
Learn more about wavelength:https://brainly.com/question/31143857
#SPJ1
Unger homework!!!!! please guys can you help me? I don't have the textbook.
Textbook: the developing person through the Lifespan 11th edition.
Characters 20, 21, 22
you are to pick one area (biosocial, cognitive, or psychosocial) of development and apply it to your specific development. Once you have read the chapters, some aspects of one of these three chapters or areas should resonate with you such that you see yourself in your textbook readings. That's what I want you to center your discussion around.
What did you learn about yourself while reading one or all three of these chapters?
Are there any areas of the reading that made you think, "That's me! or "That's where I am in my life right now!" or "Wow, I hadn't considered that!"
Take a deep dive into the chapter content, and really apply and integrate what you've read to your personal life and developmental experiences.
Biosocial development focuses on the physical and biological changes that occur throughout the lifespan. It encompasses aspects such as growth, motor skills, and changes in the body's systems.
Cognitive development refers to the growth and changes in thinking, memory, problem-solving, and intelligence. Psychosocial development involves the social, emotional, and psychological aspects of development, including identity formation, relationships, and moral reasoning.
When reading these chapters, you might come across various concepts and theories that shed light on different stages of development and the challenges individuals may face during those stages.
By reflecting on the content, you can gain insights into your own developmental journey, identifying areas that resonate with your experiences, thoughts, and behaviors.
It can provide a deeper understanding of yourself and potentially open up new perspectives on your personal growth.
Remember, it's important to engage with the material and consider how it relates to your own life experiences rather than relying solely on the textbook.
For more such questions on Biosocial, click on:
https://brainly.com/question/28347174
#SPJ8
What is the central idea of the passage? "Wild life on rockies"
The central idea of the passage "Wild life on rockies" is that Nature is a beautiful but dangerous force that should be treated with respect.
Option C is correct.
What is meant by wildlife?Wildlife refers to undomesticated animal species, but has come to include all organisms that grow or live wild in an area without being introduced by humans.
In the Wildlife, Animals that live independently of people, in natural conditions.
The Wildlife in the area includes deer, bears, and raccoons.
In conclusion, Nature is a beautiful but dangerous force but should be accorded respect.
Learn more about wildlife at:
https://brainly.com/question/29786011
#SPJ1
A frying pan is connected to a 1500 volt circuit. If the resistance of the frying pan is 25 ohms, how many amperes does the frying pan draw?
The current (in amperes) the frying pan draws from the 500 volt circuit, given that it has a resistance of 25 ohms is 60 amperes
How do i determine the current drawn by the frying pan?From the question given above, the following data were obtained:
Voltage of circuit (V) = 1500 V Resistance of frying pan (R) = 5 Ω Current (I) =?The current drawn by the frying pan can be obtained as follow:
Voltage (V) = Current (I) × resistance (R)
Inputting the given parameters, we have:
1500 = Current × 25
Divide both sides by 25
Current = 1500 / 25
Current = 60 amperes
Thus, from the above calculation we can conclude that the current drawn by the frying pan is 60 amperes
Learn more about current:
https://brainly.com/question/23754329
#SPJ1
IS EARTH PLANET FALT OF ROUNDED?
Explanation:
Falt isn't a size. I guess you were trying to spell flat. No, the earth isn't flat. instead, it is round.
Answer:
Earth is round. But the map shows you flat.
explain why a meter bridge is unsuitable for comparison of low resistance
A meter bridge is not suitable for the comparison of low resistance.
A meter bridge is based on the principle of null deflection, the bridge is balanced by adjusting the known resistance until there is no current flowing through the galvanometer. But if they are low resistance values, then the current flowing through the bridge is relatively high. This situation leads to inaccurate measurements and potential damage to the components.
The meter bridge operation is based on the assumption that the resistance being measured is purely resistive. But in reality, low resistance values include parasitic inductance and capacitance. This will affect the accuracy of the measurement.
The sensitivity of a meter bridge decreases as the resistance values being compared decrease.
To know more about resistance:
https://brainly.com/question/24574268
1000 cm³ of air at 10°c is heated to 80°c. what will be the new volume if the pressure remained atmospheric?
The new volume of the air is 1247.35 cm³.
What is volume?Volume is the space occupied by a matter. The S.I unit of volume is cubic meter (m³).
To calculate the volume of the air, we use the formula below.
Formula:
V/T = V'/T'............................ Equation 1Where:
V = Initial volume of airV' = Final volume of the airT = Initial temperature of airT' = Final temperature of airFrom the question,
Given:
V = 1000 cm³T = 10 °C = 283 KT' = 80 °C = 353KSubstitute these values into equation 1 and solve for V'
1000/283 = V'/353V' = (353×1000)/283V' = 1247.35 cm³Learn more about volume here: https://brainly.com/question/25736513
#SPJ1
Thermal energy at room temperature is about 25 meV.You're designing an electronic device to operate at room temperature, and you want the kinetic energy associated with the uncertainty principle not to exceed the thermal energy. What's the minimum width in which your device can confine an electron?
The minimum width in which your device can confine an electron to ensure that the kinetic energy associated with the uncertainty principle does not exceed the thermal energy at room temperature is approximately 1.86 nanometers.
To determine the minimum width in which your device can confine an electron, we can make use of the Heisenberg uncertainty principle. The uncertainty principle states that there is a fundamental limit to the precision with which certain pairs of physical properties of a particle, such as position and momentum, can be known simultaneously.
In the case of confinement of an electron, we are interested in the uncertainty in position and momentum. The uncertainty principle can be written as:
Δx * Δp ≥ h/4π
Where Δx is the uncertainty in position, Δp is the uncertainty in momentum, and h is the reduced Planck's constant (approximately 6.626 × 10^(-34) J·s).
We can relate momentum to kinetic energy using the equation:
p = sqrt(2mE)
Where p is momentum, m is the mass of the electron (approximately 9.10938356 × 10^(-31) kg), and E is the kinetic energy.
Since we want the kinetic energy associated with the uncertainty principle not to exceed the thermal energy (25 meV), we can equate the two:
Δp = sqrt(2mE) = sqrt(2m * 25 * 10^(-3) eV)
Now, we can rearrange the uncertainty principle equation to solve for the minimum width (Δx):
Δx = h/(4πΔp)
Substituting the value of Δp, we can calculate the minimum width:
Δx = h/(4π * sqrt(2m * 25 * 10^(-3) eV))
Plugging in the values and performing the calculation:
Δx = (6.626 × 10^(-34) J·s)/(4π * sqrt(2 * 9.10938356 × 10^(-31) kg * 25 * 10^(-3) eV))
Δx ≈ 1.86 × 10^(-9) meters
For more such questions on electron,click on
https://brainly.com/question/860094
#SPJ8
Which of the following is a vector quantity
weight
temperature
acceleration
distance
Answer:
weight, acceleration
Explanation:
weight = mass x gravity(meaning the direction of the mass)
acceleration = v-u/t
v-u is the change in velocity
817 cm3 at 80.8 kPa to 101.3 kPa
The volume of the gas at 101.3 kPa would be approximately 651.25 cm³.
To calculate the change in volume of a gas from an initial pressure to a final pressure, we can use Boyle's law, which states that the pressure and volume of a gas are inversely proportional at constant temperature.
Boyle's law can be expressed as:
P1 * V1 = P2 * V2
Where:
P1 = Initial pressure (80.8 kPa)
V1 = Initial volume (817 cm³)
P2 = Final pressure (101.3 kPa)
V2 = Final volume (to be calculated)
Let's plug in the values into the equation and solve for V2:
80.8 kPa * 817 cm³ = 101.3 kPa * V2
V2 = (80.8 kPa * 817 cm³) / 101.3 kPa
V2 ≈ 651.25 cm³
Therefore, the volume of the gas at 101.3 kPa would be approximately 651.25 cm³.
For more such questions on volume,click on
https://brainly.com/question/14197390
#SPJ8
If the parallel circuit had 23 amps with the same resistance, what will be the voltage
If the parallel circuit had 23 amps with the same resistance, the voltage will be V = 23 amps * R.
To determine the voltage in a parallel circuit with a given current and resistance, we can use Ohm's Law, which states that the voltage (V) is equal to the current (I) multiplied by the resistance (R).
In this case, if the parallel circuit has a current of 23 amps and the same resistance as before, we can use the same resistance value as before to calculate the voltage.
Ohm's Law equation: V = I * R
Given:
Current, I = 23 amps
Resistance, R (same as before)
Substituting the values into the equation, we have:
V = 23 amps * R
Therefore, The specific value of resistance (R) is not provided in the question, so the voltage (V) cannot be determined without knowing the resistance value. If the resistance value is provided, you can substitute it into the equation to calculate the voltage.
To learn more about Ohm's Law click:
brainly.com/question/1247379
#SPJ1
Two objects gravitationally attract with force of 1,926N. If mass 1is multiplied by 0.38,mass2 is multiplied by 3.21, and the distance is multiplied by 2.25,the new force of attraction is:
The new force of attraction is found to be 813.25 N.
How do we calculate?We that F_ = G * (m1 * m2) / r²
F_ = force of gravitational attraction,
G = gravitational constant = [tex]6.67430 * 10^-^1^1[/tex]N(m/kg)²
m1 and m2 = masses of the two objects, and
r = distance between the centers of the two objects.
new mass = 0.38 * m1
new mass = 3.21 * m2_o
new distance = 2.25 * r
new force = F * (m1 * m2) / (m1 * m2) * (r² / r²)
new force= 1926 N * (0.38 * m1_original * 3.21 * m2_original) / (m1_original * m2_original) * (r_original²/ (2.25 * r_original)²)
new force = 1926 N * 0.38 * 3.21 / (2.25²)
new force = 813.25 N
Learn more about force at:
https://brainly.com/question/12970081
#SPJ1
How does the photoelectric effect support the particle nature of light and the concept of photons?
The photoelectric effect supports the particle nature of light and the concept of photons. When light interacts with certain materials, it causes the ejection of electrons. This phenomenon suggests that light is composed of discrete particles called photons. The energy transfer from photons to electrons in the photoelectric effect is consistent with the idea that light behaves as particles. The photoelectric effect played a crucial role in establishing the concept of photons and the understanding of light as both a particle and a wave.
~~~Harrsha~~~
As the book fell through the air and eventually hit the ground,
A. potential energy was destroyed and kinetic energy was create
B. sound energy was created
C. both potential energy and kinetic energy were destroyed
D. the energies of the system were converted from one form to
another
As the book fell through the air and eventually hit the ground, the energies of the system were converted from one form to another.
Option D is correct.
What is energy?Energy is described as the quantitative property that is transferred to a body or to a physical system, recognizable in the performance of work and in the form of heat and light.
The forms of energy includes:
Chemical energy.
Electrical Energy.
Mechanical Energy.
Thermal energy.
Nuclear energy.
Gravitational Energy.
In conclusion, When the book fell through the air and hit the ground, the potential energy it possessed due to its position above the ground was converted into kinetic energy as it accelerated towards the ground.
Learn more about energy at:
https://brainly.com/question/13881533
#SPJ1
Sally puts on wool socks and rubs her feet on a nylon carpet. How does static electricity build up in Sally?
O When electrons from the wool socks move into the carpet, Sally and her socks gain a negative charge.
O The friction causes electrons from the wool socks to move to Sally, giving Sally a negative charge.
O Electrons from the wool socks move into the carpet, giving Sally and her socks a positive charge.
Electrons from the carpet move into the wool socks, giving Sally and her socks a positive charge.
When Sally puts on wool socks and rubs her feet on a nylon carpet, static electricity builds up through a process involving the movement of electrons. The friction between the wool socks and the nylon carpet causes electrons from the wool socks to move to the carpet, resulting in Sally and her socks gaining a negative charge.
The correct answer would be the friction causes electrons from the wool socks to move to Sally, giving Sally a negative charge.
The friction between the wool socks and the nylon carpet causes electrons from the wool socks to move to the carpet, resulting in Sally and her socks gaining a negative charge. This is due to the phenomenon known as the triboelectric effect.
The triboelectric effect occurs when two materials come into contact and then separate. During the rubbing process, the atoms in the two materials interact, causing the transfer of electrons between them. In this case, the wool socks have a greater affinity for electrons compared to the nylon carpet. As a result, electrons from the socks are transferred to the carpet, leaving the socks with a positive charge and the carpet with a negative charge.
Sally, wearing the wool socks, experiences an accumulation of excess electrons on her feet, giving her a negative charge. This excess negative charge on her body can lead to static electricity-related phenomena, such as experiencing a shock when touching a metal object or seeing her hair stand on end when near certain surfaces.
It's important to note that the movement of electrons determines the charge distribution during the triboelectric effect. In this scenario, electrons move from the wool socks to the nylon carpet, resulting in Sally and her socks gaining a negative charge.
For more such information on: friction
https://brainly.com/question/24386803
#SPJ8
What is the frequency of light that has a wavelength of 682 nm? Round to 3 sig figs and put your answer in scientific notation (e.g. 6.11E14). (note: the velocity of light is 3.0E8 m/s) Hz
Answer:
439.6 THz
Explanation:
A string of length
�
LL vibrates to form a standing wave with two antinodes as shown below.
The wavelength of the standing wave is 2L. Option B
What is the wavelength of a standing wave with one antinode?The wavelength of a standing wave with a single antinode is equal to the distance between the antinodes next to it. The wave's highest displacement occurs at the antinodes.
The wavelength () of the standing wave can be expressed as follows if we refer to the separation between neighboring antinodes as d:
λ = 2L
Therefore, the wavelength of a standing wave with a single antinode is equal to double the distance between adjacent antinodes.
Learn more about standing wave:https://brainly.com/question/14176146
#SPJ1
A block of mass
m = 2.50 kg
is pushed
d = 2.30 m
along a frictionless horizontal table by a constant applied force of magnitude
F = 18.0 N
directed at an angle
= 25.0°
below the horizontal as shown in the figure below.
The work done on the block by the applied force is approximately -23.04 Joules.
The negative sign indicates that the work done is in the opposite direction of the displacement, as the force is directed below the horizontal.
In this scenario, the block of mass 2.50 kg is being pushed along a frictionless horizontal table by a constant applied force of magnitude 18.0 N, directed at an angle of 25.0° below the horizontal.
To determine the work done on the block by the applied force, we can use the formula:
Work = Force * Distance * cos(theta)
where the force is 18.0 N, the distance is 2.30 m, and theta is the angle between the force and the direction of displacement.
Since the force is directed at an angle below the horizontal, the angle theta is 180° - 25° = 155°, as the angle is measured with respect to the horizontal axis.
Now we can calculate the work done:
Work = 18.0 N * 2.30 m * cos(155°)
The cosine of 155° is negative, as it is in the third quadrant.
Work = 18.0 N * 2.30 m * (-0.57358)
Work ≈ -23.04 J
Therefore, the work done on the block by the applied force is approximately -23.04 Joules.
The negative sign indicates that the work done is in the opposite direction of the displacement, as the force is directed below the horizontal.
For more such questions on work, click on:
https://brainly.com/question/25573309
#SPJ8
A circle loop of radius 2 m is positioned in a uniform magnetic field of magnitude 1.5 N/C so that the plane of the loop makes an angle of 65° with the magnetic field. Find the flux passing through the circle loop.
The flux through the circle loop of wire is determined as 7.96 N/C.m².
What is the flux passing through the circle loop?The flux through the circle loop of wire is calculated by applying the following formula.
Ф = EA cosθ
where;
B is the magnitude of the electric fieldA is the area of the circular loopθ is the direction of the loopThe area of the wire is calculated as follows;
A = πr²
A = π (2 m)²
A = 12.57 m²
The flux through the circle loop of wire is calculated as;
Ф = EA cosθ
Ф = 1.5 x 12.57 x cos (65)
Ф = 7.96 N/C.m²
Learn more about flux here: https://brainly.com/question/26289097
#SPJ1