Answer:
Approximately 2000 J.
General Formulas and Concepts:
Thermodynamics
Specific Heat Formula: q = mcΔT
q is heat (in J)m is mass (in g)c is specific heat (in J/g °C)ΔT is change in temperature (in °C or K)Explanation:
Step 1: Define
Identify variables
[Given] c = 0.897 J/g °C
[Given] m = 79 g
[Given] ΔT = 28°C
[Solve] q
Step 2: Solve for q
Substitute in variables [Specific Heat Formula]: q = (79 g)(0.897 J/g °C)(28 °C)Multiply [Cancel out units]: q = (70.863 J/°C)(28 °C)Multiply [Cancel out units]: q = 1984.16 JStep 3: Check
Follow sig fig rules and round. We are given 2 sig figs as our lowest.
1984.16 J ≈ 2000 J
down there (pls hurryy!!)
Answer:
D. is the correct answer.
Answer:
There are many changes that can increase the rate of chemical reaction but the most significant is
Adding a catalyst to the reaction mixture.
The other changes that can increase the rate of chemical reaction are;
Change in temperature (increasing the temperature)
Change of pressure (higher pressure)
pH of the solution (optimum pH)
Change in concentration (Increasing the concentration of the reactants)
Find the molecular formula for CH that has a molecular weight of 65g.
Answer: Molecular Formula is C5H5
Explanation: M(CH) = 13.018 g/mol
Empirical formula of compound is (CH)x in which x = 2,3,4,...
Molar mass of the substance is 65 g. x = 65 g/mol : 13 g/mol = 5
¿Qué es una fuente de luz secundaria?
Answer:
Las fuentes secundarias son testimonios de segunda mano elaborados con posterioridad a los hechos ocurridos y basados en la información de las fuentes primarias, por ejemplo: libros y revistas, películas, video-documentales, series televisivas, textos escolares y mapas temáticos.
Answer:
Las fuentes de luz secundarias son aquellas que reflejan la luz que produce otra fuente. Por ejemplo: la luz de la luna (refleja la luz que produce el Sol), un espejo.
Explanation:
Describethe role of trees and photosynthesis in the carbon cycle
Answer:
Tree's absorb so much carbon dioxide from the atmosphere and store the carbon in their biomass
86.30 mL of an HCl solution was required to neutralize 31.75 mL of 0.150 M NaOH. Determine the molarity of the HCI.
Answer:
0.055M
Explanation:
Using the formula as follows:
CaVa = CbVb
Where;
Ca = concentration of acid (M)
Cb = concentration of base (M)
Va = volume of acid (mL)
Vb = volume of base (mL)
According to the information given in this question, Ca (HCl) = ?, Cb (NaOH) = 0.150, Va (HCl) = 86.30mL, Vb (NaOH) = 31.75mL
Using CaVa = CbVb
Ca = CbVb ÷ Va
Ca = (0.150 × 31.75) ÷ 86.30
Ca = 4.7625 ÷ 86.30
Ca = 0.055M
6. What category of elements is found between the metals and nonmetals
on the periodic table?
A synthetic
B. metalloids
C. radioactive
D. noble gases
Answer:
B. metalloids
Explanation:
The metalloids are found between metals and non-metals on the periodic table.
Metalloids have properties between those of metals and non-metals. Under certain prevalent conditions, they exhibit a set of properties.
Synthetic substances are those artificially made, they are not found on the periodic table.
Noble gases are found in the last group on the periodic table.
Radioactive substances are found in the lanthanide and actinide series.
¿Cómo se llama el proceso en donde se transforma el oxígeno en dióxido de carbono
Answer:
respiración
Explanation:
Calculate the specific heat capacity of the unknown metal given the
following information; the mass of the metal is 225 g, the temperature
raises by 13C and the energy absorbed was 1363 joules.
A. 0.466 j/gC
B.1.02j/gC
C.0.96 j/gC
D.2.14 j/gC
Answer: The specific heat capacity of the unknown metal given is [tex]0.466 J/g^{o}C[/tex].
Explanation:
Given: Mass = 225 g
Change in temperature = [tex]13^{o}C[/tex]
Heat energy = 1363 J
The formula used to calculate specific heat is as follows.
[tex]q = m \times C \times \Delta T[/tex]
where,
q = heat energy
m = mass of substance
C = specific heat
[tex]\Delta T[/tex] = change in temperature
Substitute the values into above formula as follows.
[tex]q = m \times C \times \Delta T\\1363 J = 225 g \times C \times 13^{o}C\\C = \frac{1363 J}{225 g \times 13^{o}C}\\= 0.466 J/g^{o}C[/tex]
Thus, we can conclude that the specific heat capacity of the unknown metal given is [tex]0.466 J/g^{o}C[/tex].
What may cause a species to become less genetically diverse?
A. Isolation from members of its species
B. Low population numbers
C. Both isolation and low population numbers
D. None of these
"science"
Answer:
b i think im not fully sure
Explanation:
Answer:
C- Both isolation and low population
Explanation:
90 percent sure
Calculate the number of moles of Al2O3 that are produced when 1.2 mol of FeO is used in the following reaction.
2Al(s) + 3FeO(s) -> 3Fe(s) + Al2O3(s)
A.
3.6 mol Al2O3
B.
3.6 mol Fe
C.
0.40 mol Fe
D.
0.40 mol Al2O3
E.
0.60 mol Al2O3
F.
2.4 mol Al2O3
Answer:
D
Explanation:
___Fe2O3 + ___C --> ___Fe + ___ C03 balanced
Answer:
Fe2O3 + C → 2Fe + CO3
Explanation:
The unbalanced equation given in this question is as follows:
Fe2O3 + C → Fe + C03
To balance this equation, one should ensure that the number of atoms of each element on both sides of the equation is equal. The balanced equation is as follows;
Fe2O3 + C → 2Fe + CO3
N.B, there are;
- 2atoms of Fe on both sides
- 1 atom of C on both sides
- 3 moles of O on both sides
How is the process of natural selection different from the process of selective breeding?
Answer:
Explanation:
The difference between the two is that natural selection happens naturally, but selective breeding only occurs when humans intervene. For this reason selective breeding is sometimes called artificial selection. Different varieties of plants and animals with desired characteristics can be developed by selective breeding.
1.
How does light behave when it is shined on an object?
Answer:
Reflection is when light bounces off an object. If the surface is smooth and shiny, like glass, water or polished metal, the light will reflect at the same angle as it hit the surface. For a smooth surface, reflected light rays travel in the same direction.
Explanation:
Given the balanced equation representing a reaction:
H2SO3 + H2O « H3O+ + HSO3-
According to one acid-base theory, the H2SO3 molecules act as (AKS 5g)
Answer:
An acid because they donate H^+ ions
Explanation:
Let us look at the equation again;
H2SO3 + H2O « H3O+ + HSO3-
An acid donates hydrogen ion while a base accepts hydrogen ion. Hence, we have to look at which species that acted as hydrogen ion donors or acceptors.
We can clearly see that H2SO3 acted as a hydrogen ion donor while H2O acted as a hydrogen ion acceptor.
Thus, H2SO3 acted as an acid by donating hydrogen ions.
PLEASE HELPPP!!!! THANK YOUUU!!!!
You have the correct answer
The temperature of the areas surrounding Kochi before each storm was about 10°C and there was the same amount of water vapor in the air. Given this information, which storm do you predict will have the most rainfall, and why?
Answer:
Tropical storm
Explanation:
The tropical storm have the most rainfall because tropical winds will increase in strength as temperatures rise. With the increase in temperature, the tropical storms have stronger winds which leads to produce higher rainfall. There is a direct relationship between temperature and amount of rainfall. As the temperature increases, the tropical storms have stronger winds which leads to more rainfall while on the other hand, decrease in temperature decrease the strength of the tropical storm's winds that leads to lower rainfall.
The temperature given shows that the storm that will be predicted is a tropical storm.
What is temperature?It should be noted that temperature means the degree of hotness or coldness in a body.
In this case, since the temperature of the areas surrounding Kochi before each storm was about 10°C and there was the same amount of water vapor in the air, the appropriate storm is a tropical storm.
Learn more about temperature on:
https://brainly.com/question/2339046
Need help fast! Would love if you could explain... but if not that’s ok
A molecule contains 52.20 grams of manganese and 3.80 g of carbon what is its empirical formula
MnC3
Mn3C
Answer: Mn3C is the corrects answer
Trust me :)
A gas has a volume of 1.22L at 179K. Once heated, the same gas now has a volume of 6.1L at 285K and 1.34atm. What was the original pressure of the gas?
What are the environmental factors in space that need to be taken into account in the design of electronics?
Answer: Here
Explanation:
trapped and transient radiation, solar and galactic cosmic rays, which can profoundly damage spacecraft electronics are presented
Answer:
Environmental factors including trapped and transient radiation, solar and galactic cosmic rays, which can profoundly damage spacecraft electronics are presented. Some effects such as ionization and atomic displacement damages to semiconductors and single event phenomena are also briefly mentioned.
Explanation:
What is one benefit that nuclear power plants currently provide for our environment? O A. They provide energy while increasing natural gas pollution. B. They provide energy while increasing biomass by-products. OC. They provide energy without increasing carbon dioxide emissions. OD. They provide energy without increasing nuclear waste.
HELP PLEASE CHEMISTRY!!!!
Answer:
amını sike bilirim tabi verirsen
On the basis of your data, what elements could be responsible for each of these colored flames? Be specific.
Answer:
The answer is "Red- Lithium and Green- Copper".
Explanation:
The RedLithium is using in the batterie, which substituted the M12 and M18 lithium-ion packs as were first introduced in 2010. Milwaukee RedLithium power generation, in a nutshell, combines electronic systems, temperature resilience, or control that produce reliable, consistent electricity. This device outlasts all the other skilled battery cells, thinks faster, and works harder.
Its greenish light is a natural hue of a patina that forms over the surface layer; the patina covers its copper and produces a beautiful bluish-green facade shown on many copper rooftops or structures.
Se tiene una solución de vinagre cuya masa es de 360 gramos y densidad 0,9 g/ml. Si el porcentaje en volumen de soluto es 8%, ¿cuál es el volumen del soluto (ácido acético)?
Answer:
a
Explanation:
In the reaction N2 + 3H2—> 2 NH3, what is the mole ratio of N2 to
NH3?
Select one:
O a. 1:1
O b. 2:3
O c. 1:3
O d. 1:2
Answer:
hey,the answer is d, 1:2
Answer: D
Explanation:
The equation shows that one mole of nitrogen reacted with three moles of hydrogen to produce two moles of ammonia.
Calculate the molarity of an HCl solution if 25.0 mL of the solution is neutralized by 15.5 mL of 0.800 M NaOH. Below is the unbalanced equation: ______ HCl + _____ NaOH →____ H2O + _____ NaCl
Answer:
.496 M .
Explanation:
15.5 mL of .8 M NaOH will contain .0155 x .8 moles of NaOH
moles of NaOH = .0124 moles
For neutralization, moles contained by 25 mL of HCl = .0124
Hence molarity of HCl = .0124 / .025
= .496 M .
0.496 M is the molarity of an HCl solution if 25.0 mL of the solution is neutralized by 15.5 mL of 0.800 M NaOH.
What is molarity?Molarity (M) is the amount of a substance in a certain volume of solution. Molarity is defined as the moles of a solute per litres of a solution. Molarity is also known as the molar concentration of a solution.
Molarity = [tex]\frac{Moles \;solute}{Volume of solution in litre}[/tex]
15.5 mL of 0.8 M NaOH will contain 0.0155 x 0.8 moles of NaOH
Moles of NaOH = 0.0124 moles
For neutralization, moles contained by 25 mL of HCl = 0.0124
Hence molarity of HCl = [tex]\frac{0.0124}{0.025}[/tex]
= 0.496 M .
Hence, 0.496 M is the molarity of an HCl solution if 25.0 mL of the solution is neutralized by 15.5 mL of 0.800 M NaOH.
Learn more about the molarity here:
https://brainly.com/question/2817451
#SPJ5
Can someone tell me how to draw a atomic model for Cd
Explanation:
there you go you can just look up atomic model for CD and click images
Can someone pls tell what to put in 6 and 7 pls no links ???
A student designed an experiment to test the effect on the magnitude of the magnetic field that is generated around the wire loop. The student increased the current that passes through the wire and tests the magnitude of the magnetic force that is generated. The experimental setup is shown here. Which statements accurately describe this experimental design? Select ALL that apply. A) The student's dependent variable is the size of the wire loop. B) The student's independent variable is the size of the wire loop. C) The student's dependent variable is the magnitude of the magnetic field that is generated. D) The student's independent variable is the magnitude of the magnetic field that is generated. E) The student's independent variable is the amount of current that is being passed through the wire.
Answer:
C
Explanation:
If you start with 6 moles of N2 and 6 moles of H2 (meaning you won't have enough of 1 of the ingredients), how many moles of NH3 would you be able to make?
Answer:
[tex]4molNH_3[/tex]
Explanation:
Hello there!
In this case, according to the given information it will be firstly necessary to set up the chemical equation taking place:
[tex]N_2+3H_3\rightarrow 2NH_3[/tex]
We infer we need to calculate the moles of NH3 by using both of the moles of N2 and H2 at the beginning, in order to identify the limiting reactant:
[tex]n_{NH_3}=6molN_2*\frac{2molNH_3}{1molN_2}=12molNH_3\\\\ n_{NH_3}=6molH_2*\frac{2molNH_3}{3molH_2}=4molNH_3\\[/tex]
Thus, since hydrogen yields the fewest moles of ammonia, we conclude that we are just able to yield 4 moles of NH3.
Regards!
A gas is held at 120.4 kPa and 333K. When the temperature is decreased to
275K at a constant volume, calculate the new pressure in the container.
Type your answer with the correct number of sig figs and units. *
Help please 100 points!!
Answer:
....
Explanation: