Answer:
Percent yield: 78.2%
Explanation:
Based on the reaction:
4Al + 3O₂ → 2Al₂O₃
4 moles of Al produce 2 moles of Al₂O₃
To find percent yield we need to find theoretical yield (Assuming a yield of 100%) and using:
(Actual yield (6.8g) / Theoretical yield) × 100
Moles of 4.6g of Al (Molar mass: 26.98g/mol) are:
4.6g Al × (1mol / 26.98g) = 0.1705 moles of Al.
As 4 moles of Al produce 2 moles of Al₂O₃, theoretical moles of Al₂O₃ obtained from 0.1705 moles of Al are:
0.17505 moles Al × (2 moles Al₂O₃ / 4 moles Al) = 0.0852 moles of Al₂O₃,
In grams (Molar mass Al₂O₃ = 101.96g/mol):
0.0852 moles of Al₂O₃ × (101.96g / mol) =
8.7g of Al₂O₃ can be produced (Theoretical yield)Thus, Percent yield is:
(6.8g / 8.7g) × 100 =
78.2%Interpret the following equation for a chemical reaction using the coefficients given:
Cl2(g) + F2(g) 2ClF(g)
On the particulate level:
________ of Cl2(g) reacts with ______ of F2(g) to form______ of ClF(g).
On the molar level:
______ of Cl2(g) reacts with______ of F2(g) to form______ of ClF(g).
Answer and Explanation:
Given the following chemical equation:
Cl₂(g) + F₂(g) ⇒ 2ClF(g)
The coefficients are: 1 for Cl₂, 1 for F₂ and 2 for ClF. The coefficients indicate the number of units of each ompound that participates in the reaction. It gives the proportion of reactants and products in the reaction. These units can be molecules or moles. In this reaction, we can say:
On the particulate level: 1 molecule of Cl₂(g) reacts with 1 molecule of F₂(g) to form 2 molecules of ClF(g).
On the molar level: 1 mol of Cl₂(g) reacts with 1 mol of F₂(g) to form 2 mol of ClF(g).
Find the [OH−] of a 0.32 M methylamine (CH3NH2) solution. (The value of Kb for methylamine (CH3NH2) is 4.4×10−4.) Express your answer to two significant figures and include the appropriate units.
Answer:
[tex][OH^-]=0.01165M[/tex]
Explanation:
Hello,
In this case, for the dissociation of methylamine:
[tex]CH_3NH_2(aq)+H_2O(l)\rightleftharpoons CH_3NH_3^+(aq)+OH^-(aq)[/tex]
We can write the basic dissociation constant as:
[tex]Kb=\frac{[CH_3NH_3^+][OH^-]}{[CH_3NH_2]}[/tex]
That in terms of the reaction extent [tex]x[/tex], turns out:
[tex]Kb=\frac{x*x}{[CH_3NH_2]_0-x}[/tex]
[tex]4.4x10^{-4}=\frac{x^2}{0.32M-x}[/tex]
That has the following solution for [tex]x[/tex]:
[tex]x_1=-0.01209M\\x_2=0.01165M[/tex]
Yer 0.01165M is valid only as no negative concentrations are eligible. It means that it is the concentration of hydroxyl ions in the solution:
[tex][OH^-]=0.01165M[/tex]
Best regards.
Which of the following solutions would have the highest pH? Assume that they are all 0.10 M in acid at 25°C. The acid is followed by its Ka value.
a. HCHO2, 1.8 x 10-4
b. HF, 3.5 x 10-4
c. HClO2, 1.1 x 10-2
d. HCN, 4.9 x 10-10
e. HNO2, 4.6 x 10-4
Answer:
[tex]HCN~~Ka=4.9x10^-^1^0[/tex]
Explanation:
In this case, we have to remember the relationship between the Ka value and the pH. We can use the general reaction for any acid with his Ka value expression:
[tex]HA~->~H^+~+~A^-[/tex] [tex]Ka=\frac{[H^+][A^-]}{[HA]}[/tex]
In the Ka expression, we have a proportional relationship between Ka and the concentration of [tex]H^+[/tex]. Therefore, if we have a higher Ka value we will have a smaller pH (lets keep in mind that with a higher
So, if we have to find the higher pH value we need to search the smaller Ka value in this case [tex]HCN~~Ka=4.9x10^-^1^0[/tex].
I hope helps!
HCN has the highest pH among all the acids listed in the question.
The Ka is called the acid dissociation constant. It shows the extent to which an acid is ionized in water. The pH shows the hydrogen ion concentration of water. The higher the Ka, the higher the hydrogen ion concentration and the lower the pH.
Hence, HCN has the lowest Ka and the lowest hydrogen ion concentration. Therefore, HCN has the highest pH among all the acids listed in the question.
Learn more: https://brainly.com/question/6505878
Calculate the heat absorbed by a sample of water that has a mass of 45.00 g when the temperature increases from 21.0oC to 38.5 oC. (s=4.184 J/g.o C)
Answer:
The heat absorbed by the sample of water is 3,294.9 J
Explanation:
Calorimetry is the measurement and calculation of the amounts of heat exchanged by a body or a system.
The sensible heat of a body is the amount of heat received or transferred by a body when it undergoes a temperature variation (Δt) without there being a change of physical state (solid, liquid or gaseous). Its mathematical expression is:
Q = c * m * ΔT
Where Q is the heat exchanged by a body of mass m, made up of a specific heat substance c and where ΔT is the temperature variation.
In this case:
Q=?m= 45 gc= 4.184 [tex]\frac{J}{g*C}[/tex]ΔT= Tfinal - Tinitial= 38.5 C - 21 C= 17.5 CReplacing:
Q= 4.184 [tex]\frac{J}{g*C}[/tex] * 45 g* 17.5 C
Solving:
Q=3,294.9 J
The heat absorbed by the sample of water is 3,294.9 J
The accepted value of the number of Liters of gas in a mole is 22.4. List two possible reasons on why our experiment yielded a different value for the number of Liters in a mole of a gas.
Hint: Our experiment was conducted in July, in St. Paul, Minnesota.
Answer:
- Pressure in St. Paul, Minnesota
- Temperature in St. Paul, Minnesota
Explanation:
22.4 L or dm³ is the volume for a gas under Standard pressure and temperature conditions.
It is logically to say, that tempereature value at the day of the experiment was not 273.15 K, which is 32°F
We can say, that the pressure was not 1 atm. St Paul Minnesota has a minimum, but a little height, so the pressure differs by few figures from the standard pressure values.
We also have to mention, that 22.4 L is the value for the Ideal gases at standards conditions. Ideal gases does not exisist on practice, we always talk about real gases. Don't forget the Ideal Gases Law equation:
P . V = n . R . T
Pressure . Volume = number of moles . 0.082 L.atm /mol. K . 273.15K
Number of moles must be 1 at STP, to determine a volume of 22.4L
Review the reversible reactions given, along with the associated equilibrium constant Kat room temperature. In each case, determine whether the forward or reverse reaction is favored.
CH3COOH → CH3C00^- + H^+
Ka=1.8 x 10^-5
AgCl → Ag^+ + Cl^-
Ksp=1.6 x 10^-10
Al(OH)3 → Al^3+ + 3OH^-
Ksp=3.7 x 10^-15
A+B → C
K=4.9 x 10^3
Answer:
The answers to your questions are given below
Explanation:
The following data were obtained from the question:
CH3COOH → CH3C00^- + H^+
Equilibrium constant, Ka = 1.8 x 10^-5
AgCl → Ag^+ + Cl^-
Equilibrium constant, Ksp = 1.6 x 10^-10
Al(OH)3 → Al^3+ + 3OH^-
Equilibrium constant, Ksp = 3.7 x 10^-15
A+B → C
Equilibrium constant, K = 4.9 x 10^3
When the value of the equilibrium constant is grater than 1, it shows that the concentration of product is higher than that of the reactant and it implies that the forward reaction is favored.
When the value of the equilibrium constant is 1, it shows that the the concentration of the product and reactant are the same. Therefore neither the forward nor the reverse reaction is favored.
When the value of the equilibrium constant is lesser than 1, it shows that the concentration of the reactant is higher than the concentration of the product. Therefore, the reversed reaction is favored.
Now, we shall the question given above as follow:
A. CH3COOH → CH3C00^- + H^+
Equilibrium constant, Ka = 1.8 x 10^-5
Since the value of the equilibrium constant is lesser than 1, it means that the reverse reaction is favored.
B. AgCl → Ag^+ + Cl^-
Equilibrium constant, Ksp = 1.6 x 10^-10
Since the value of the equilibrium constant is lesser than 1, it means that the reverse reaction is favored.
C. Al(OH)3 → Al^3+ + 3OH^-
Equilibrium constant, Ksp = 3.7 x 10^-15
Since the value of the equilibrium constant is lesser than 1, it means that the reverse reaction is favored.
D. A+B → C
Equilibrium constant, K = 4.9 x 10^3
Since the value of the equilibrium constant is greater than 1, it means that the forward reaction is favored.
The reaction conditions are:
A. The reverse reaction is favored.
B. The reverse reaction is favored.
C. The reverse reaction is favored.
D. The forward reaction is favored.
Chemical reaction:
A. [tex]CH_3COOH[/tex] → [tex]CH_3COO^- + H^+[/tex]
Equilibrium constant, Ka = [tex]1.8 * 10^{-5}[/tex]
B. [tex]AgCl[/tex] → [tex]Ag^+ + Cl^-[/tex]
Equilibrium constant, Ksp = [tex]1.6 * 10^{-10}[/tex]
C. [tex]Al(OH)_3[/tex] → [tex]Al^{3+} + 3OH^-[/tex]
Equilibrium constant, Ksp = [tex]3.7 * 10^{-15}[/tex]
D. A+B → C
Equilibrium constant, K = [tex]4.9 * 10^3[/tex]
Conditions for Equilibrium constant:When the value of the equilibrium constant is greater than 1, it shows that the concentration of product is higher than that of the reactant and it implies that the forward reaction is favored.
When the value of the equilibrium constant is 1, it shows that the the concentration of the product and reactant are the same. Therefore neither the forward nor the reverse reaction is favored.
When the value of the equilibrium constant is lesser than 1, it shows that the concentration of the reactant is higher than the concentration of the product. Therefore, the reversed reaction is favored.
Thus, the reactions will be:
A. The reverse reaction is favored.
B. The reverse reaction is favored.
C. The reverse reaction is favored.
D. The forward reaction is favored.
Find more information about Equilibrium constant here:
brainly.com/question/12858312
A 400 mL sample of hydrogen gas is collected over water at 20°C and 760 torr the vapor pressure of water at 20°C is 17.5 torr. what volume will the dry hydrogen gas occupy at 20°C and 760 torr?
Answer:
V2 = 17371.43ml
Explanation:
We use Boyles laws
since temperature is constant
P1V1=P2V2
760 x 400 = 17.5 x V2
304000 = 17.5 x V2
V2 = 304000/17.5
V2 = 17371.43ml
The volume will the dry hydrogen gas occupy at the temperature of 20°C and vapor pressure at 760 torrs will be 18 ml.
What is vapor pressure?
The vapor pressure of a liquid is independent of the volume of liquid in the container, whether one liter or thirty liters; both samples will have the same vapor pressure at the same temperature.
The temperature has an exponential connection with vapor pressure, which means that as the temperature rises, the vapor pressure rises as well the equation is -
P1 V1 / T1 = P2 V2 / T1
here, P = pressure
T = temperature
V = volume
substituting the value in the equation,
400 ×760 / 20 = 17.5× V / 20
V = 400× 760 / 20 × 17.5 / 20
V = 18 ml
Therefore the volume of the hydrogen gas remaining at this temperature will be 18 ml.
learn more about vapor pressure, here :
https://brainly.com/question/27682495
#SPJ5
Identify the Lewis acid and Lewis base from among the reactants in each of the following equations. Match the words in the left column to the appropriate blanks in the sentences on the right.
1. Fe3+ (aq)+6CN (aq) Fe(CN) (aq)______is the Lewis acid and_____is the Lewis base. is the Lewis
2. CI- (aq) + AlCl3 (aq) AlCl4-____is the Lewis acid and______is the Lewis base.
3. AlBr3 + NH3 H3NAlBr3______is the Lewis acid and______is the Lewis base.
A. AlCl3
B. CN-
C. AlBr3
D. Cl-
E. NH3
F. Fe3+
Answer:
1. Lewis acid: F. Fe₃⁺, Lewis base: B. CN⁻
2. Lewis acid: A. AlCl₃, Lewis base: D. Cl⁻
3. Lewis acid: C. AlBr₃, Lewis base: E. NH₃
Hope this helps.
The Lewis acid is chemical substance which possesses an empty orbital and accepts an electron pair from a Lewis base ( donor ), in order to create a Lewis adduct ( molecule created from the bonding of Lewis base and acid ).
The Lewis acid from reaction 1 is Fe₃⁺ while the Lewis base is CN⁻ also the Lewis acid from reaction 2 is AICI₃ while the Lewis base is CI⁻
Hence we can conclude that the Lewis acids and Lewis bases of the reactions in the question are as listed above.
Learn more: https://brainly.com/question/16108775
If the average rate of the reaction A --->2B C is 1M/s, what is the average rate of formation (in M/s) of B over that same period of time
Answer:
[tex]r_B=2M/s[/tex]
Explanation:
Hello,
In this case, since the average rate of reaction is related with the consumption of A which has an stoichiometric coefficient of 1, the rate of formation of B will be:
[tex]r_B=2*1M/s\\\\r_B=2M/s[/tex]
By cause of the stoichiometric coefficient of B which doubles the average rate.
Best regards.
Which of the following statements about water is not true?
Answer:
Water has a low specific heat capacity and so large bodies of water moderate temperatures on Earth.
Explanation:
Water has a very high specific heat capacity, meaning that it has to absorb a lot of energy to raise the temperature by one degree. Because water has a high specific heat capacity, large bodies of water can moderate the temperature of nearby land.
Hope this helps.
A hot lump of 27.4 g of aluminum at an initial temperature of 69.5 °C is placed in 50.0 mL H2O initially at 25.0 °C and allowed to reach thermal equilibrium. What is the final temperature of the aluminum and water, given that the specific heat of aluminum is 0.903 J/(g·°C)? Assume no heat is lost to surroundings.
Answer:
[tex]\large \boxed{29.7 \,^{\circ}\text{C}}[/tex]
Explanation:
There are two heat transfers involved: the heat lost by the aluminium and the heat gained by the water.
According to the Law of Conservation of Energy, energy can neither be destroyed nor created, so the sum of these terms must be zero.
Let the Al be Component 1 and the H₂O be Component 2.
Data:
For the Al:
[tex]m_{1} =\text{27.4 g; }T_{i} = 69.5 ^{\circ}\text{C; }\\C_{1} = 0.903 \text{ J$^{\circ}$C$^{-1}$g$^{-1}$}[/tex]
For the water:
[tex]m_{2} =\text{50.0 g; }T_{i} = 25.0 ^{\circ}\text{C; }\\C_{2} = 4.184 \text{ J$^{\circ}$C$^{-1}$g$^{-1}$}[/tex]
Calculations
(a) The relative temperature changes
[tex]\begin{array}{rcl}\text{Heat lost by Al + heat gained by water} & = & 0\\m_{1}C_{1}\Delta T_{1} + m_{2}C_{2}\Delta T_{2} & = & 0\\\text{27.4 g}\times 0.903 \text{ J$^{\circ}$C$^{-1}$g$^{-1}$} \times\Delta T_{1} + \text{50.0 g} \times 4.184 \text{ J$^{\circ}$C$^{-1}$g$^{-1}$}\Delta \times T_{2} & = & 0\\24.74\Delta T_{1} + 209.2\Delta T_{2} & = & 0\\\end{array}[/tex]
(b) Final temperature
[tex]\Delta T_{1} = T_{\text{f}} - 69.5 ^{\circ}\text{C}\\\Delta T_{2} = T_{\text{f}} - 25.0 ^{\circ}\text{C}[/tex]
[tex]\begin{array}{rcl}24.74(T_{\text{f}} - 69.5 \, ^{\circ}\text{C}) + 209.2(T_{\text{f}} - 25.0 \, ^{\circ}\text{C}) & = & 0\\24.74T_{\text{f}} - 1719 \, ^{\circ}\text{C} + 209.2T_{\text{f}} -5230 \, ^{\circ}\text{C} & = & 0\\233.9T_{\text{f}} - 6949\, ^{\circ}\text{C} & = & 0\\233.9T_{\text{f}} & = & 6949 \, ^{\circ}\text{C}\\T_{\text{f}}& = & \mathbf{29.7 \, ^{\circ}}\textbf{C}\\\end{array}\\\text{The final temperature is $\large \boxed{\mathbf{29.7 \,^{\circ}}\textbf{C}}$}[/tex]
Check:
[tex]\begin{array}{rcl}27.4 \times 0.903 \times (29.7 - 69.5) + 50.0 \times 4.184 (29.7 - 25.0)& = & 0\\24.74(-39.8) +209.2(4.7) & = & 0\\-984.6 +983.2 & = & 0\\-985 +983 & = & 0\\0&=&0\end{array}[/tex]
The second term has only two significant figures because ΔT₂ has only two.
It agrees to two significant figures
If D+2 would react with E-1, what do you predict to be the formula?
Answer:
DE2
Explanation: for every one D+2 you need two E-1 because +2=-2
Determine the volume occupied by 10 mol of helium at
27 ° C and 82 atm
Answer:
3.00 L
Explanation:
PV = nRT
(82 atm × 101325 Pa/atm) V = (10 mol) (8.314 J/mol/K) (27 + 273) K
V = 0.00300 m³
V = 3.00 L
Choose the substance with the lowest boiling point.
A. NBr3.
B. CI2H2.
C. H2O2.
D. H2S.
E. O2.
Answer:
E. O2
Explanation:
All substances has a simple molecular structure, where between their molecules are held by van der Waals' forces. But C must be incorrect because between the H2O2 molecules, they are mainly held by hydrogen bonds on top of van der Waals' forces. Hydrogen bonds are stronger than van der Waals' forces, so more energy is required to separate the H2O2 molecules.
In structures A and D, the molecules are polar. Their van der Waals' forces are stronger than Cl2H2 and O2, which are non-polar.
Between the Cl2H2 and O2, O2 has a smaller molecular size. The van der Waals' forces between the O2 molecules are hence the weakest. Least amount of energy is required to break the intermolecular forces between the O2 molecules therefore it has the lowest boiling point.
Nitrogen has different oxidation states in the following compounds: nitrite ion, nitrous oxide, nitrate ion, ammonia, and nitrogen gas. Arrange these species in order of increasing nitrogen oxidation state. Select the correct answer below: A. ammonia, nitrogen gas, nitrite, nitrous oxide, nitrate B. nitrogen gas, ammonia, nitrous oxide, nitrite, nitrate C. ammonia, nitrogen gas, nitrous oxide, nitrite, nitrate D. ammonia, nitrogen gas, nitrate, nitrite, nitrous oxide
Answer:
C. ammonia, nitrogen gas, nitrous oxide, nitrite, nitrate
Explanation:
To establish the oxidation number of nitrogen in each compound, we know that the sum of the oxidation numbers of the elements is equal to the charge of the species.
Nitrite ion (NO₂⁻)
1 × N + 2 × O = -1
1 × N + 2 × (-2) = -1
N = +3
Nitrous oxide (NO)
1 × N + 1 × O = 0
1 × N + 1 × (-2) = 0
N = +2
Nitrate ion (NO₃⁻)
1 × N + 3 × O = -1
1 × N + 3 × (-2) = -1
N = +5
Ammonia (NH₃)
1 × N + 3 × H = 0
1 × N + 3 × (+1) = 0
N = -3
Nitrogen gas (N₂)
2 × N = 0
N = 0
The order of increasing nitrogen oxidation state is:
C. ammonia, nitrogen gas, nitrous oxide, nitrite, nitrate
How many moles of aqueous magnesium ions and chloride ions are formed when 0.250 mol of magnesium chloride dissolves in water
Answer:
0.250 mol Mg²⁺
0.500 mol Cl⁻
Explanation:
Magnesium chloride (MgCl₂) dissociates into ions according to the following equilibrium:
MgCl₂ ⇒ Mg²⁺ + 2 Cl⁻
1 mol 1 mol 2 mol
1 mol of Mg²⁺ and 2 moles of Cl⁻ are formed per mole of MgCl₂. If we have 0.250 mol of MgCl₂, the following amounts of ions will be formed:
0.250 mol MgCl₂ x 1 mol Mg²⁺/mol MgCl₂= 0.250 mol Mg²⁺
0.250 mol MgCl₂ x 2 mol Cl⁻/mol MgCl₂= 0.500 mol Cl⁻
Answer:
HEY THE ANSWER ABOVE ME IS RIGHT!! i defientely misclicked my rating :/
5/5 all the way.
Explanation:
The reaction, 2 SO3(g) <--> 2 SO2(g) + O2(g) is endothermic. Predict what will happen if the temperature is increased.
Explanation:
This reaction is in equilibrium and would hence obey lechatelier's principle. This principle states that whenever a system at equilibrium undergoes a change, it would react in way so as to annul that change.
Since it is an endothermic reaction, increasing the temperature would cause the reaction to shift towards the right.
This means that it favours product formation and more of the product would be formed.
Which molecule or ion has a trigonal planar shape?
Answer:B
Explanation: A P E X
what is chemical equation of Braium chloride?
Answer:
BaCl2
Explanation:
Barium = Ba
Chloride => Cl-
Chemical Equation:
Ba + Cl => BaCl2
Note:
The valency of barium is 2 and valency of chloride is 1 (i.e. chlorine). The formula formed by the combination of these elements is BaCl2 (there's exchange of valencies when these two elements combine).
Assume that a nickel weighs exactly 5.038650 g for the sets of weights listed below obtained by a single weighing on the balance below
Answer:
afshkkyfugutuiryfyi
Q1. Calculate the amount of copper produced in 1.0 hour when aqueous CuBr2 solution was electrolyzed by using a current of 4.50 A. Q2. In another electroplating experiment, if electric current was passed for 3 hours and 2.00 g of silver was deposited from a AgNO3 solution, what was the current used in amperes
Answer:
[tex]\boxed{\text{Q1. 3.6 g; Q2. 0.2 A}}[/tex]
Explanation:
Q1. Mass of Cu
(a) Write the equation for the half-reaction.
Cu²⁺ + 2e⁻ ⟶ Cu
The number of electrons transferred (z) is 2 mol per mole of Cu.
(b) Calculate the number of coulombs
q = It
[tex]\text{t} = \text{1.0 h} \times \dfrac{\text{3600 s}}{\text{1 h}} = \text{3600 s}\\\\q = \text{3 C/s} \times \text{ 3600 s} = \textbf{10 800 C}[/tex]
(c) Mass of Cu
We can summarize Faraday's laws of electrolysis as
[tex]\begin{array}{rcl}m &=& \dfrac{qM}{zF}\\\\& = &\dfrac{10 800 \times 63.55}{2 \times 96 485}\\\\& = & \textbf{3.6 g}\\\end{array}\\\text{The mass of Cu produced is $\boxed{\textbf{3.6 g}}$}[/tex]
Note: The answer can have only two significant figures because that is all you gave for the time.
Q2. Current used
(a) Write the equation for the half-reaction.
Ag⁺ + e⁻ ⟶ Ag
The number of electrons transferred (z) is 1 mol per mole of Ag.
(a) Calculate q
[tex]\begin{array}{rcl}m &=& \dfrac{qM}{zF}\\\\2.00& = &\dfrac{q \times 107.87}{1 \times 96 485}\\\\q &=& \dfrac{2.00 \times 96485}{107.87}\\\\& = & \textbf{1789 C}\\\end{array}[/tex]
(b) Calculate the current
t = 3 h = 3 × 3600 s = 10 800 s
[tex]\begin{array}{rcl}q&=& It\\1789 & = & I \times 10800\\I & = & \dfrac{1789}{10800}\\\\& = & \textbf{0.2 A}\\\end{array}\\\text{The current used was $\large \boxed{\textbf{0.2 A}}$}[/tex]
Note: The answer can have only one significant figure because that is all you gave for the time.
Given a fixed amount of gas in a rigid container (no change in volume), what pressure will the gas exert if the pressure is initially 1.50 atm at 22.0oC, and the temperature is changed to 11.0oC?
A. 301 atm
B. 1.56 atm
C. 0.750 atm
D. 1.44 atm
E. 3.00 atm
Answer:
The pressure the gas will have if the pressure is initially 1.50 atm at 22.0 ° C and the temperature changes at 11.0 ° C is 1.44 atm (option D)
Explanation:
Gay Lussac's law indicates that, as long as the volume of the container containing the gas is constant, as the temperature increases, the gas molecules move more rapidly. Then the number of collisions against the walls increases, that is, the pressure increases. That is, the gas pressure is directly proportional to its temperature.
Gay-Lussac's law can be expressed mathematically as follows:
[tex]\frac{P}{T}=k[/tex]
Where P = pressure, T = temperature, K = Constant
You have a gas that is at a pressure P1 and at a temperature T1. When the temperature varies to a new T2 value, then the pressure will change to P2, and then:
[tex]\frac{P1}{T1}=\frac{P2}{T2}[/tex]
In this case:
P1= 1.50 atmT1= 22 °C= 295 °K (being 0°C= 273 °K)P2= ?T2= 11 °C= 284 KReplacing:
[tex]\frac{1.5 atm}{295 K}=\frac{P2}{284 K}[/tex]
Solving:
[tex]P2= 284 K*\frac{1.5 atm}{295 K}[/tex]
P2=1.44 atm
The pressure the gas will have if the pressure is initially 1.50 atm at 22.0 ° C and the temperature changes at 11.0 ° C is 1.44 atm (option D)
Based on their molecular structure, identify the stronger acid from each pair of oxyacids. Match the words in the left column to the appropriate blanks in the sentences on the right.
1) HI is a stronger acid than H2Te because iodine____than tellurium.
2) H2Te is a stronger acid than H2S because the H-Te bond is_____.
3) NaH is not acidic because hydrogen____than sodium.
a. has a more negative electron afflity
b. is more electronegative
c. has a larger atomic radius
d. stronger
e. is harder to ionize
Answer:
1)is more electronegative
2)
3) is more electronegative
Explanation:
1) for the first question, iodine is more electronegative than tellurium hence we naturally expect that HI should be more acidic than H2Te since electronegativities play a role in the acidity of chemical species.
2) the correct option is not listed because the H2Te bond is weaker than the H2S bond. This makes it easier for H2Te to dissociate releasing H^+ , thereby being more acidic than H2S.
3) Hydrogen is more electronegative than sodium hence it cannot be ionized thus NaH is not acidic.
Un globo lleno de helio tenia un volumen de 8.5 L en el suelo a 20°C y a una presión de 750 torr. Cuando se le soltó, el globo se elevo a una altitud donde la temperatura era de -20°C y la presión de 425 torr, ¿Cuál era el volumen del gas del globo en estas condiciones?
Answer:
El volumen del gas era 12.95 L
Explanation:
Se relaciona la presión y el volumen mediante la ley de Boyle, que dice:
“El volumen ocupado por una determinada masa gaseosa a temperatura constante, es inversamente proporcional a la presión”
La ley de Boyle se expresa matemáticamente como: P*V=k
Por otro lado, la Ley de Charles consiste en la relación que existe entre el volumen y la temperatura absoluta de una cierta cantidad de gas ideal, el cual se mantiene a una presión constante. Esta ley dice que cuando la cantidad de gas y de presión se mantienen constantes, el cociente que existe entre el volumen y la temperatura siempre tendrán el mismo valor:
[tex]\frac{V}{T}=k[/tex]
Por último, la Ley de Gay Lussac dice que la temperatura absoluta y la presión son directamente proporcionales. Es decir, cuando se mantiene todo lo demás constante, mientras suba la temperatura de un gas subirá también su presión. Y mientras la temperatura del gas baje, lo mismo ocurrirá con la presión:
[tex]\frac{P}{T}=k[/tex]
Combinado las mencionadas tres leyes se obtiene:
[tex]\frac{P*V}{T} =k[/tex]
Cuando se desean estudiar dos diferentes estados, uno inicial y una final de un gas, se puede aplicar:
[tex]\frac{P1*V1}{T1} =\frac{P2*V2}{T2}[/tex]
Recordando que la temperatura debe usarse en grados Kelvin, conoces los siguientes datos:
P1: 750 torrV1: 8.5 LT1: 20°C= 293°K (siendo 0°C=273°K)P2: 425 torrV2: ?T2: -20°C= 253 °KReemplazando:
[tex]\frac{750 torr*8.5 L}{293K} =\frac{425 torr*V2}{253 K}[/tex]
Resolviendo:
[tex]V2=\frac{750 torr*8.5 L}{293K} *\frac{253 K}{425 torr}[/tex]
V2= 12.95 L
El volumen del gas era 12.95 L
The volume of a sample of oxygen is 300mL when the pressure is 1 atm and the temperature is 27 C . At what temperature is the volume 1.00 L and the pressure.500 atm?
Answer:
T2 = 500K
Explanation:
Given data:
P1 = 1atm
V1 = 300ml
T1= 27 + 273 = 300K
T2 = ?
V2 = 1.00ml
P2 = 500atm
Apply combined law:
P1xV1//T1 = P2xV2/T2 ...eq1
Substituting values into eq1:
1 x 300/300 = 500 x 1/T2
Solve for T2:
300T2 = 500 x 300
300T2 = 150000
Divide both sides by the coefficient of T2:
300T2/300 = 150000/300
T2 = 500K
Which correctly lists the three land uses that the Bureau of Land Management was originally created to manage? mining, recreation, wildlife refuges recreation, developing oil and gas, battlefields grazing, mining, developing oil and gas developing oil and gas, battlefields, wildlife refuges
Answer: C
Explanation:
Right on edge 2020
The Bureau of Land Management was originally created to manage land for grazing, mining, developing oil and gas.
What is land management?Land management refers to the activities which are done in order to protect and preserve the land as well the resources found on land.
The Bureau of Land Management was created to manage land in the US.
The Bureau of Land Management was originally created to manage land for grazing, mining, developing oil and gas.
Learn more about land management at: https://brainly.com/question/784519
If the H+ concentration is 0.00001 M, what is the OH- concentration?
Answer:
1.00x10^-9
Explanation:
The equilibrium between carbon dioxide gas and carbonic acid is very important in biology and environmental science. CO2 ( aq) + H2O ( l) H2CO3 ( aq) Which one of the following is the correct equilibrium constant expression (K c) for this reaction?
a) K =[H2CO3]/ [CO2]
b) K=[CO2]/ [H2CO3]
c) K=[H2CO3]/ [CO2][H2O]
d) K=[CO2][H2O]/ [H2CO3]
e) K=1/[H2CO3]
Answer:
Kc = [H₂CO₃] / [CO₂]
Explanation:
Equilibrium constant expression (Kc) of any reaction is defined as the ratio between molar concentrations in equilibrium of products over reactants.
Pure solids and liquids don't affect the equilibrium and you don't have to take its concentrations in the equilibrium.
Also, each specie must be powered to its reactant coefficient.
For example, for the reaction:
aA(s) + bB(aq) ⇄ cC(l) + nD(g) + xE(aq)
The equilibrium constant, kc is:
Kc = [D]ⁿ / [B]ᵇ[E]ˣ
You don't take A nor C species because are pure solids and liquids. b, n and x are the reactant coefficients of each substance. Ratio of products over reactants
Thus, for the reaction:
CO₂(aq) + H₂O(l) ⇄ H₂CO₃(aq)
The Kc is:
Kc = [H₂CO₃] / [CO₂]
What is the name of this molecule?
Answer:
[tex]\boxed{Butyne}[/tex]
Explanation:
Triple Bonds => So it is an alkyne
The suffix used will be "-yne"
4 Carbons => The prefix used will be "But-"
Combining the prefix and suffix, we get:
=> Butyne
Answer:
[tex]\boxed{\mathrm{Butyne}}[/tex]
Explanation:
Alkynes have triple bonds ≡. The molecule has one triple bond.
Suffix ⇒ yne
The molecule has 4 carbon atoms and 6 hydrogen atoms.
Prefix ⇒ But (4 carbons)
The molecule is Butyne.
[tex]\mathrm{C_4H_6}[/tex]
What states can electrons exist in? A. Electron clouds or energy levels B. Positive and negative C. Up and down spin D. In phase and out of phase
Answer:
A. Electron clouds or energy levels
Explanation:
Electrons can exist in two states:
Stablized in electronic orbitalsFreely movingElectrons can exist in an electron cloud or energy level. Electron in an atoms have ability to change energy levels either by emitting or absorbing a photon that form the energy equal to the energy difference between the two levels.
Hence, the correct answer is A.
Answer:
Up and DOWN spin
Explanation: