According to the collision theory, a chemical reaction occur when enough activation energy is added to correct the orientation of the particle collisions.
What is collision theory?Collision theory is a hypothesis theory, according to which for the formation of product or for the completion of reaction, reactants molecules should collide with each other with proper orientation.
So, for the collision between the reactant molecules some minimum amount of energy is required which is known as activation energy, to covert into the products.
Hence, option (1) is correct i.e. when enough activation energy is added to correct the orientation of the particle collisions.
To know more about collision theory, visit the below link:
https://brainly.com/question/14566831
in figure 21-4b in what direction is the force defeating the wire
Answer:
the one that has more power to it
How would you find the density of a can of soda pop?
A. Find the mass of the can of soda pop and then multiply by the number of cubic centimeters in the can
B. Find the mass of the can of soda pop and then divide by the number of cubic centimeters in the can
C. Convert a gallon into cubic centimeters and then divide by the mass of the can of soda pop
D. Convert a gallon into cubic centimeters and then subtract the mass of the can of soda pop
Answer:
it's A.
Explanation:
have uh good day ma :)))))))
Select the correct answer.
A sample taken from a layer of mica in a canyon has 2.10 grams of potassium-40. A test reveals it to be 2.6 billion years old. How much
potassium-40 was in the sample originally if the half-life of potassium-40 is 1.3 billion years?
OA.
4.20 g
© B.
8.40 g
OC.
12.6 g
O D. 16.8 g
O E. 25.2[H
Answer: B 8.40 g
Explanation:
For many purposes, we can treat propane (C3H8) as an ideal gas at temperatures above its boiling point of -24C Suppose the temperature of a sample of propane gas is lowered from 14.0c to -1.0c and at the same time the pressure is changed.
If the initial pressure was0.75 kPa and the volume decreased by55.0% what is the final pressure? Round your answer to the correct number of significant digits.
it's 75 k bro thats the answer
Which best completes the analogy?
B Cells : Produce Antibodies :: T Cells : ___________________
A. Get rid of good cells that have been infected
B. Tell B cells to start making antibodies
C. Tell killer cells to attack
D. remember antigens that have attacked the body
Answer:
d
Explanation:
d
How many iron atoms are in Fe2O3?
Answer:
2 iron atoms in Fe2O3
¿Cómo se llama el grupo IIA de la tabla periódica?
Answer:
los metales alcalinotérreos: berilio (Be), magnesio (Mg), calcio (Ca), estroncio (Sr), bario (Ba) y radio (Ra).
o simplemente llamado grupo 2A
Explanation:
11
Cr2O3 + 2Al → 2Cr + Al2O3
Chromium is produced by reacting its oxide with aluminum. If 76 g of Cr2O, and 27 g of Al completely react to form 51 g of Al2O3. how many grams of Cr are formed?
Answer:
Deci trebuie sa te aplici cu 2 din3 pe suprafata pamanyului chinez
Explanation:
Deci 1287+2086+2762+7:5
4. A blue light is shined on objects X and Y. Object X appears to be blue, and object Y appears to
be black. Which of the following is correct?
A. Object X absorbs blue light, and object Y reflects blue light.
B. Object X reflects blue light, and object Y absorbs blue light.
C. Object X must be black, and object Y must be blue.
D. Object X must be blue, and object Y must be black.
A blue light is shined on objects X and Y. Object X appears to be blue, and object Y appears to be black when Object X reflects blue light, and object Y absorbs blue light. Hence option B is correct.
What is light ?Visible light spectrum is nothing but the range of wavelength of radiation from 4000 angstrom to 7000 angstrom(Violet to Red). light is a energy packet. Every Photon having different wavelength travels with same velocity c (velocity of light). When we focus numbers of colors from visible spectrum to a point, that point appears as a white light. hence white light is composed of numbers of Colors in it.
When we pass white light through a prism, as white light enters in the prism all the colors having different wavelength travels with different velocity in the prism due to that there is separation of colors from the white light. Therefore we get different colors of white light in the prism this phenomenon is know as dispersion of light.
Light can be reflected, absorbed, transmitted diffracted and scattered etc.
α + β + ν = 1 where α, β, ν are coefficient of absorption, reflection and transmission.
When any object appears to be black it means that radiation has been absorbed by that body, it has high absorption coefficient. and when a body appears to be colored, it means that object has reflected the particular color, it having high reflection coefficient.
Hence option B is correct.
To know more about light :
https://brainly.com/question/15200315
#SPJ2.
What causes the process of transmutation?
O A. A gamma ray is emitted from an atom's nucleus.
B. Mass is lost due to the formation of a nucleus.
C. Quarks in the nucleus shift between particles.
D. The number of protons in the nucleus changes.
Answer: D. The number of protons in the nucleus changes.
Explanation:
Transmutation occurs due to a change in the number of protons in the nucleus as this will cause the element to either become another isotope of the same element or an entirely new element altogether.
There are two types of transmutation; Natural and Artificial. Natural transmutation happens as unstable elements such as Uranium-238 try to find stability. They decay until they become a stable element. Artificial transmutation happens when atoms are collided with particles that cause them to change.
Calcula cuantos mililitros de oxigeno se necesitan para quemar 3.5 ml de C₆H₆ a CNTP, la reacción sin balancear es la siguiente: C₆H₆ + O₂ → CO₂ + H₂O
Answer:
[tex]26.25mL \ O_2[/tex]
Explanation:
¡Hola!
En este caso, dado que se nos da reacción de combustión del benceno, primero debemos balancearla como se muestra a continuación:
C₆H₆ + ¹⁵/₂ O₂ → 6CO₂ + 3H₂O
Vemos que hay una relación molar entre el benceno y oxígeno de 1:¹⁵/₂, por lo que la relación de volúmenes es:
[tex]3.5 mL\ C_6H_6*\frac{15/2\ mL\ O_2}{1mL\ C_6H_6} \\\\=26.25mL \ O_2[/tex]
¡Saludos!
The total pressure of two unknown gases is 5 kPa. The partial pressure of one of the gases is 2.345 kPa, what is the partial pressure of the other gas?
Answer:
[tex]p_2=2.655kPa[/tex]
Explanation:
Hello there!
In this case, according to the Dalton's law, which states that the total pressure is equal the sum of the pressures of the gases in the mixture, we write the following for this system:
[tex]P_T=p_1+p_2[/tex]
Thus, we solve for the partial pressure of the gas #2 as shown below:
[tex]p_2=P_T-p_1\\\\p_2=5kPa-2.345kPa\\\\p_2=2.655kPa[/tex]
Best regards!
Hi can someone who know the answers tell me what it is and pls don't send me a link also don't send me the wrong answers if you don't know it's ok :)
Answer:
you diba ikaw ang nagpamalimali diba no
You are given 250 mL of a 12.0 M solution of KNO3. To obtain a 5.0 M, to what volume does the solution need to be diluted to?
600 ml
104.17 mL
0.24 mL
60 mL
Answer:
600 mL
Explanation:
molarity 1 * volume 1 = molarity 2 * volume 2. So this means 12 * 250 = 3000 and divide that by 5 to get 600 mL.
Some sugar is added to cold water in a beaker.
After some time, all the sugar dissolves and spreads throughout the water.
(a)(¡) Name the process that occurs which causes the sugar to spread throughout the water.
(ii) State two ways to make the sugar dissolve more quickly.
(b) Pure water can be obtained from the sugar solution using this apparatus.
Name the process used to obtain pure water from the sugar solution.
i) diffusion, concentration differences in gas and fluid disappears when particles of sugar are evenly spread in solution
ii) Heating the solution, mixing the solution
b) Distillation, solution is heated until water is vaporized and water vapour condenses in another part of apparatus.
Sugar is separated from water by evaporation of the sugar solution to dryness.
i) The process of that causes the sugar to spread throughout the water is called solvation. Solvation simply refers to the interaction of a solute and a solvent.
ii) To make the sugar to dissolve quicker;
The temperature of the solvent can be raisedThe system can be stirred periodicallyb)To obtain pure water from sugar, the sugar is evaporated to dryness. This is done by heating the sugar in a set up as shown in the image attached.
Learn more: https://brainly.com/question/14866314
Brakes are to a car as
to a nuclear-fission chain reaction.
A. fuel rods are
B. proliferation is
C. free neutrons are
D. control rods are
Answer:
D. control rods are
I hope dis helps :3
Brakers are to a car as control rods are to a nuclear-fission chain reaction. The correct option is D.
What is a nuclear-fission chain?A chain reaction occurs when neutrons generated during fission cause subsequent fission in at least one more nucleus.
This nucleus creates neutrons, and the cycle continues.
The process can be either controlled (nuclear power) or uncontrolled (nuclear weapons) (nuclear weapons).
Thus, the correct option is D. control rods are.
Learn more about nuclear-fission chain
https://brainly.com/question/24297620
How many moles of nitrogen are in 12 grams
Answer:
Explanation:
The chemical formula of nitrogen is N2
A mol of Nitrogen atoms = 14 grams
So N2 will have a molar mass of 14 * 2 = 28 grams
number of moles of N2 = given mass / molar mass
number of moles of N2 = 12 / 28
number of moles of N2 = 0.4286 mols
3. 7moles of Ba(NO3)2 is dissolved in 75kg of distilled water.
What is the boiling point of this solution? Hint: Find molality first.
Answer:
100.14°C
Explanation:
The boling point elevation is a colligative property that describes the increasing in boiling point of a solution regard to the boiling point of the pure solvent. The equation is:
ΔT = Kf*m*i
Where ΔT is boiling point elevation
Kf is boiling point elevation (0.51°C/m for water)
m is molality of the solution (7moles Ba(NO3)2 / 75kg = 0.09333m
i is Van't Hoff factor = 3 for Ba(NO3)2 (Because its dissolution produce 3 ions = Ba²⁺ and 2 NO₃⁻
Replacing:
ΔT = 0.51°C/m*0.09333m*3
ΔT = 0.14°C is the boiling point elevation
As the boiling point of water is 100°C, the boiling point of the solution is:
100°C + 0.14°C =
100.14°C
Give an example of a metal and a nonmetal you use in everyday life.
Answer:
A type of metal I use everyday in life in using the iron door knob on my doors.
A nonmetal I use everyday is chlorine for when I need to clean my pool.
Explanation:
Is this your intention?
Blank O2 + blank Mg arrow blank MgO
Select the coefficients that balance the equation:
MgO *
A) 1,1,1
B) 1,2,2
C) 2,3,4
D) 1,4, 2
Answer:
its a
Explanation:
a
What will the change in temperature be when 90 J are applied to 15 g of gold. (Cgold = 0.126 J/gºC)
Round your answer to the nearest whole number.
°C
E
3
4
5
Next
O
I 17
Answer:
48 °C
Explanation:
q = 90J
m = 15 g
C = 0.126 J/gºC
q = mct
90 = (15)(0.126)t
t = 47.62 °C = 48 °C
Answer:
Explanation:
Formula
E = m * c * Δt
Δt is what you seek.
Givens
E = 90 joules
m = 15 grams
c = 0.126
Solution
90 = 15 * 0.126 * Δt Divide by 15
90/15 = 15/15 * 0.126 * Δt
6 = 0.126 * Δt Divide by 0.126
6/0.126 = Δt
47.619 = Δt
Δt = 48 oC
why dil. sulphuric acid cannot be used instead of dil.hcl in lab preparation of carbon dioxide gas?
Answer:
Because Sulphuric acid(H2SO4) is one of the substance which have a very high vigourous reaction if mix with chemicals thats why we take the same sulphuric acid but having lighter effects known to be as Dil.Sulphuric And so it is generally use for precaution while during experimentations Thats why we use it.
Hope it helps
In which type of chemical reaction would two reactants join together and form one product
Answer:
Synthesis Reaction
Explanation:
A synthesis reaction occurs when two or more reactants combine to form a single product. In a decomposition reaction, one reactant breaks down into two or more products. This is the reverse of a synthesis reaction. Replacement reactions occur when elements switch places in compounds.
what is the mass of 0.200 mol of calcium
Alex built a model to show how light bends when placed into water. To do this, Alex filled a fish tank up with water, and shined a green laser through the water. The angle he shined the laser into the fish tank is the line above the water, and the angle that the light bent is seen below the water. What is a limitation of this model? The model cannot show how light bends. The model is unable to use different colors of light The model cannot calculate the speed of light The model is not 3 dimensional
Answer:
The model cannot show how light bends.
Explanation:
What is formed when 2 non metals reacts?
A) covalent bond
B) ionic bond
C) molecular bond
Answer:
A) covalent bond
Explanation:
Covalent bonding generally happens between nonmetals.
What would be the volume, in liters measured at STP, of 9.75 moles of carbon monoxide?
I
In steps 3 and 4 of the citric acid cycle, successive oxidations produce ________ as a waste product and the four-carbon carrier ________. In steps 3 and 4 of the citric acid cycle, successive oxidations produce ________ as a waste product and the four-carbon carrier ________. CO2; malate CO2; succinyl-SCoA ADP; oxaloacetate ADP; succinyl-SCoA CO2; oxaloacetate
Answer:
CO2; succinyl-SCoA
Explanation:
Citric acid cycle, also called Krebs cycle is the second stage of aerobic cellular respiration, which occurs in the mitochondrion. The kreb's cycle is made up of 7 distinct steps, with each involving series of enzymatic reactions.
According to this question, step 3 and 4 of the citric acid cycle involves an oxidation and decarboxylation reaction to produce 2 molecules of carbon dioxide (CO2) and a 4-carbon compound called succinyl group. A coenzyme A binds to the succinyl group to form succinyl-SCoA.
In the Caribbean countries, general election is usually held every _ years
it is held every 4-5 years
If 13 grams of copper sulfate is reacted with zinc how much of each product is produced?
Answer:
No. Of Moles of zinc = m/Ar
= 13/ 65.38 = 0.198 moles
From balanced equation, Mole ration between CuSO4 and Zn is 1 : 1
So only 0.198 moles of CuSO4 reacts, it is in excess
Mass = no of Moles X Mr
Mass = 0.198 X 159.5 = 31.59 grams
Volume = mass m denisty
Volume j 31.59 / 3.6 = 8.78 ml
Explanation:
i think this wrong