absorption of uv light in the ozone layer causes the dissociation of oxygen and ozone. which requires longer wavelength to dissociate

C. 2 ATP.  At the cellular level, energy is used and stored as adenosine triphosphate (ATP). Adenine, ribose, and three serially bound phosphate groups make up.

the structure of ATP, which is a nucleoside triphosphate. An organic substance called adenosine triphosphate provides energy for a variety of biological functions in living cells, including muscular contraction, nerve impulse transmission, condensate dissolving, and chemical synthesis. The main molecule for storing and transmitting energy in cells is adenosine 5'-triphosphate (ATP). At the cellular level, energy is used and stored as adenosine triphosphate (ATP). Adenine, ribose, and three serially bound phosphate groups make up. It is frequently referred to as the cell's energy currency and is like the money that is kept in a bank.provides energy for a variety of biological functions in living cells, including muscular contraction, nerve impulse transmission,

learn more about ATP  here:

https://brainly.com/question/14637256

#SPJ4

The way a chemical reaction between baking soda and citric acid can produce new water molecules is that they can react together to produce new compounds, including water.

When baking soda and citric acid are mixed together in water, they undergo a chemical reaction known as a neutralization reaction. In this type of reaction, an acid (citric acid) reacts with a base (baking soda) to form a salt (sodium citrate) and water.

In the case of baking soda and citric acid, the reaction is exothermic, meaning that it releases heat. This heat can cause the water molecules to move faster, leading to the formation of bubbles of carbon dioxide gas, which is the fizzing you observe when baking soda and citric acid are mixed together.

Find out more on baking soda at https://brainly.com/question/28624529

#SPJ1

Answer:

correct

Explanation:

I agree that California cities that are farther inland, such as Sacramento, are typically warmer than those that are near the coast, such as San Francisco. This is because the coast has a cooling effect due to the ocean breeze and the proximity to the ocean, which helps to moderate temperatures. Inland areas, on the other hand, are farther from these cooling influences and can experience higher temperatures, especially during the summer months

It is important to tap the side of the eudiometer tube before reading the volume of gas collected because it helps to settle any bubbles that may be present in the gas sample.

Bubbles can form in the gas sample during the collection process, for example due to temperature or pressure changes, and can cause inaccuracies in the measurement of the volume of gas. If bubbles are present when the volume of gas is measured, it can lead to overestimation of the volume of gas collected. By tapping the side of the eudiometer tube, the bubbles will rise to the top and can be removed by opening the tube or by releasing the pressure. This will ensure that the volume of gas measured is an accurate representation of the amount of gas that was collected, and not affected by the presence of bubbles. This is important for obtaining precise and accurate results in experiments that use eudiometer tubes.

To know more about eudiometer tubes click here:

https://brainly.com/question/18994460#

#SPJ4

Answer:C12: 0.487 m

Explanation:

Answer: The elements in Groups 2,15,16 and 17 of the Periodic Table are called alkali metals. They form ionic compounds when they react with non-metals. Their ions have a single positive charge. For example, sodium forms sodium ions, Na+

Explanation:

hope you understood

The mass of oxygen in the room would be 46.2 kg.

The mass of a component as a percentage of the mass of the substance itself is known as the percent composition. Mathematically, this is expressed as:

Mass of component/mass of material multiplied by 100% gives the percent composition.

The percentage of oxygen in the air in this instance is represented as 21%, while the total mass of air in the classroom is provided as 220 kg. This formula can be used to determine how much oxygen is present in the classroom:

% oxygen composition = mass of oxygen/mass of air

Making the oxygen mass the focus of the formula:

Mass of air x percent oxygen content equals mass of oxygen

Let's replace the values now:

Weight of oxygen = 21% times 220

= 0.21 x 220

= 46.2 kg

Learn more about oxygen here:

https://brainly.com/question/13370320

#SPJ4

When doubling the number of the moles of the HCl decrease the rate of HCl production because the acid convertase enzyme is converting HCl back into H⁺ and Cl⁻.

The reaction is as follows :

H⁺  +  Cl⁻  ⇄ HCl

If we double the number of the moles of the HCl , it decreases the rate of the HCl production because of the reason that  the acid convertase enzyme is converting the HCl back into the H⁺ and Cl⁻. The purpose of the  enzyme is to allow the conversion of the reactant to the product and the product back to the reactant

To learn more about moles here

https://brainly.com/question/29724957

#SPJ4

The balanced equation of the redox reaction using the ion-electron method is:

3 Hg + 8 HNO₃ → 3 Hg(NO₃)₂ + 2 NO + 4 H₂O

The correct option is D.

Redox reactions include a change in the oxidation state of the substrate. When oxidation occurs, electrons are lost, or the oxidation state increases. When a reduction occurs, electrons are gained or the oxidation state decreases.

The balanced equation of the redox reaction using the ion-electron method is given below as follows:

Hg + HNO₃ → Hg(NO₃)₂ + NO + H₂O

Hg⁰ is oxidized to Hg²⁺ by the loss of two electrons

N⁵⁺ is reduced to N²⁺ by a gain of three electrons

To balance electron loss, we add a coefficient of 3 in from of Hg and a coefficient of 8 in front of HNO₃

3 Hg + 8 HNO₃ → 3 Hg(NO₃)₂ + 2 NO + 4 H₂O

Learn more about redox reactions at: brainly.com/question/21851295

#SPJ1

As a diatomic molecule, fluorine is represented by (F2). The following balanced chemical equation illustrates how sodium metal and fluorine gas combine to generate sodium fluoride.

F2(g) = 2Na(s) + 2NaF (s).

The symbolic representation of a chemical reaction is a chemical equation. To ensure that the amount of atoms in the reactants and products are equal, a chemical equation must be balanced.

Prior to conducting the synthesis, the chemical equation between the reacting species must be balanced because doing so will enable the reactant to be taken in stiochiometric proportions. The law of conservation of mass is truly satisfied when a chemical reaction is balanced.

A poorly stated or imbalanced chemical equation will undoubtedly have an impact on the synthesis. There are times when the product won't form, and side products will form in its place.

To learn more about Balanced Chemical equation from given link

https://brainly.com/question/11904811

#SPJ1

Copper sulphate has oxygen elements in it while copper sulphide doesn't have.

Go through the given link below to know more about copper:-

https://brainly.com/question/24856041

#SPJ4

Answer:

The final volume will be  44.69 L

Initial volume V₁ = 106.0 L

Initial pressure P₁ = 740.0 mm of Hg

Initial temperature T₁ = 45.0⁰C

Final pressure P₂ = 780.0 mm of Hg

Final temperature T₂ = 20.0⁰C

It is required to calculate the final volume V₂

The wire is 91826.77 N/m stiff, One layer of a cross section contains 1.0158e13 atoms, Number of bonds per unit length = 9.96e9, rigidity = 9.035 e-9 N/m

a) The force acting on the bar is given by (F) = mg = 119 * 9.8 = 1166.2 N.

The wire's extension (L) is 1.27 cm, or 0.0127.

Therefore, stiffness of wire = F/L = 1166.2 / 0.0127.

The wire is 91826.77 N/m stiff.

b) The ratio of the number of atoms in one cross-sectional layer to 8e-4 (2.51e-10)2

One layer of a cross section contains 1.0158e13 atoms.

c) The length's bond count is 2.5 / 2.51e-10.

Number of bonds per unit length = 9.96e9

d) Bond stiffness equals force acting on the bond / bond strain

bond-applied force = 1.152e-20 N

strain is equal to (0.0127/2.5)*2.51e-10 = 1.275e-12 m.

Stiffness is calculated as 1.152e-20 / 1.275e-12.

rigidity = 9.035 e-9 N/m

Learn more about atoms here:

https://brainly.com/question/13654549

#SPJ4

Inorganic chemicals in sunscreen can reflect or scatter the light away from the skin, and organic (carbon-based) ones can absorb UV rays

Answer:

It helps prevent the skin from absorbing UV waves.

Explanation:

Noble gases does not have any oxidation number. And elements in pure form does not have any oxidation numbers.

Elements in their pure form, such as gold (Au), do not have oxidation numbers because they are not chemically bonded to any other elements. Some other examples of elements that do not have oxidation numbers include carbon (C) in a diamond, and hydrogen (H) in molecular hydrogen (H2).

Learn more about oxidation numbers here:

https://brainly.com/question/3035498

#SPJ4

The white solid formed when an alkaline earth metal reacts with iodine is an ionic compound.

The white solid formed when an alkaline earth metal reacts with iodine is an ionic compound. This compound is composed of polyatomic anions and cations in an ionic lattice, which gives it its solid form. The cations come from the alkaline earth metals, which are group two elements on the periodic table, and the anions come from the iodine, which is a halogen. The compound is typically composed of a ratio of 1:1 or 2:1, depending on the metals in reaction. The compound is usually insoluble in water and can be used in various applications. It is often used for its chemical inertness, which makes it ideal for processes that involve corrosive or reactive materials.

To know more about alkaline earth metals click below:

https://brainly.com/question/12835232#

#SPJ4

2.8×10−2 M will the cyclopropane concentration be after 235. 0 min.

The cycloalkane cyclopropane has the chemical formula (CH2)3, and it is made up of three methylene groups (CH2) that are joined together to create a ring. The structure experiences significant ring strain as a result of the ring's modest size.

[tex]k=3.36*{10^{-5}}{s^{-1}}\\\\K=\frac {2.303 }{t} log \frac{a}{a-x}\\\\3.36*{10^{-5}}=\frac {2.303 }{235min} log \frac{0.445}{a-x}\\\\\\3.36*{10^{-5}}=\frac {2.303 }{235*60} log \frac{0.445}{a-x}\\\\\\20.571*{10^{-2}}=log \frac{0.445}{a-x}\\\\\\1.58=\frac{0.445}{a-x}\\\\\\(a-x)=0.281\\\\(a-x)=2.8*{10^{-2}}M[/tex]

This meant that the quick and painless induction of anaesthesia using cyclopropane and oxygen was possible Ralph Waters, an American anaesthetist, developed cyclopropane and put it to use in medicine. To save this then-expensive substance, he devised a closed system with carbon dioxide absorption. With a blood/gas partition value of 0.55 and a minimum alveolar concentration of 17.5%, cyclopropane is a reasonably strong, non-irritating, and sweet-smelling substance. .8×10−2 M will the cyclopropane concentration be after 235. 0 min.

learn more about cyclopropane Refer:brainly.com/question/18521496

#SPJ4

The activity after 26 days can be calculated as 1.1 x 10^4 cpm.

Radioactive is a type of energy that is emitted from certain elements when they undergo radioactive decay. Radioactive elements, such as uranium and radium, contain unstable atoms that are in a constant state of decay. When these atoms break apart, they release energy in the form of radiation.

The decay constant (k) of the sample can be calculated as follows:
k = ln(2.00 x 10^6/9.0 x 10^5) / 4.0
k = 0.073
Therefore, the activity after 26 days can be calculated as follows:
A = 2.00 x 10^6 e^(-0.073 x 26)
A = 1.1 x 10^4 cpm

To learn more about radioactive
https://brainly.com/question/25750315
#SPJ1

The empirical formula of nicotine is C0.96H1N1

The empirical formula of a compound is the simplest whole-number ratio of the atoms in the compound.

To find the empirical formula of nicotine, you need to determine the number of moles of each element present in the sample and then divide by the lowest number of moles.

First, you need to convert the mass of nicotine, CO2, and H2O to moles. To do this, you can use the molar mass of each element:

C = 12.01 g/mol

H = 1.01 g/mol

N = 14.01 g/mol

O = 16.00 g/mol

5.250 mg of nicotine is equal to:

[tex]\frac{ 5.250 mg}{(12.01+1.01+14.01)g/mol}[/tex])   = 0.0027 moles

14.242 mg of CO2 is equal to:

[tex]\frac{14.242mg}{(12.01+16.00*2)g/mol}[/tex]     = 0.0024 moles

4.083 mg of H2O is equal to:

 [tex]\frac{4.083mg}{(1.01*2+16.00)g/mol}[/tex]       = 0.0013 moles

Now you need to find the number of moles of each element present in the sample:

C = 0.0027 moles × 1

H = 0.0013 moles × 2

N = 0.0027 moles × 1

And finally, you can divide these values by the lowest number of moles to get the simplest whole-number ratio:

C =    [tex]\frac{ 0.0027 moles}{0.0027 moles}[/tex]      = 1

H =    [tex]\frac{0.0026 moles}{ 0.0027 moles}[/tex]      = 0.96

N =    [tex]\frac{ 0.0027 moles}{0.0027 moles}[/tex]      = 1

The empirical formula of nicotine is C0.96H1N1

It's important to note that the empirical formula represents the simplest ratio of atoms in a molecule but doesn't necessarily represent the actual molecular formula which could have more atoms or a different arrangement of atoms.

To know more about Nicotine,

https://brainly.com/question/934412

#SPJ4

Physical changes occur in dairy products when water is simply evaporated from milk (powdered milk and sweetened condensed milk).

What is  physical change?

To learn more about physical change refers to;

https://brainly.com/question/29376983

#SPJ4

The percent yield of product if a student had not heated the test tube for as long as the directions instructed is the result of the product will not match even the percent yield of the product being tested can fail.

A test tube is a tool used to carry out biochemical tests and grow microbes. The media that can be put into the test tube are solid media and liquid media and for the test tube lid you can use cotton, aluminum foil, metal caps, or plastic caps.

How to use a test tube can be heated into a beaker that has been filled with water and heated with a spirit burner for the heating process. Heating the test tube is important for laboratory tests such as purification of solvents by distillation and chemical reactions. One function of heating the solution is to increase the solubility of the solute in it. If a student does not heat the test tube according to the instructions given, the results of the product being tested will not be maximized. Even trials regarding the product fail with a high percentage.

Learn more about biochemical tests at:

https://brainly.com/question/29751259

#SPJ4

Answer:

Thermal energy plays a role in the carbon cycle by driving the process of photosynthesis in plants and other organisms. During photosynthesis, plants take in carbon dioxide from the atmosphere and convert it into organic compounds, such as glucose, using the energy from sunlight. This process also releases oxygen back into the atmosphere.

Thermal energy also plays a role in the carbon cycle by driving the process of respiration in plants and animals. During respiration, compounds are broken down to release energy, which is used by the organism. This process also releases carbon dioxide back into the atmosphere.

Explanation:

When water freezes, the attractions between water molecules weaken and the crystal lattice breaks apart.

Water molecules are the molecules which make up water. A water molecule consists of two hydrogen atoms bonded to a single oxygen atom, with the chemical formula H2O. The strong covalent bonds between the hydrogen and oxygen atoms give water many of its unique properties, such as its ability to dissolve many substances, its high surface tension, and its ability to absorb and release large amounts of heat energy.

As the temperature drops, the water molecules slow down and move closer together, forming a crystalline structure. As the temperature continues to decrease, the attractions between water molecules hold them in place in a crystal lattice, and all molecular motion stops.

To learn more about water molecules
https://brainly.com/question/1313076
#SPJ1

Answer:

29 ouns

Explanation:

it has 950 billion so it will be scaled in grams not kilograms

Answer:

Recycling aluminium uses 95% less energy than producing aluminium from raw materials like bauxite ore and it conserves energy and reduces air pollution and water pollution as well as reducing green house effects and conserving the natural resources. So the pros of recycling aluminum much out weigh the cons.

You would multiple the percentages times the atomic mass and then add each of them together.

Ex. (23.995)(.7899)+(24.986)(.10)+(25.992)(.1101). = 24.3139 amu

The every 18.02 g of the water contains 6.022 x 10²³ water molecules. For the each molecule contains the three atoms. The number of atoms are there in 500.0 g of water is 5 × 10²⁵ atoms.

The mass of water = 18.02 g

The number of molecules of water = 6.022 x 10²³ molecules

The  number of atoms are there in 500.0 g of water is as follows :

The number of atoms in 500 g of water :

= (500 g water ×  6.022 x 10²³ molecules / 18.02 water) × 3 atoms / 1 molecules

=  5 × 10²⁵ atoms

To learn more about molecules here

https://brainly.com/question/20455075

#SPJ4

The mass of the water can be obtained as 31 g.

I would want us to have the first law of thermodynamics at the back of our minds. I said this because the energy that have been lost by the brass is the energy that the water is going to have to gain and this is the first law of thermodynamics.

Thus we have;

H = mcdT

m = mass of the water

c = Specific heat capacity of water

dT = temperature change

Then we have;

2690 = m * 4.18 * (42 - 21)

m = 2690/4.18 * (42 - 21)

m = 31 g

Learn more about heat capacity:https://brainly.com/question/28302909

#SPJ1

Answer:

correct answer is petrol .

The pressure of the gas if the volume were decreased to 6L is 6 atm.

Boyle's law of ideal gases states that the pressure of an ideal gas is inversely proportional to its volume at constant temperature.

The Boyle's law equation is given as follows;

P₁V₁ = P₂V₂

Where;

P₁ = initial pressure

V₁ = initial volume

P₂ = final pressure

V₂ = final volume

3 × 12 = 6 × P

36 = 6P

P = 6atm

Therefore, the pressure of the hydrogen gas is 6 atm.

Learn more about pressure at: https://brainly.com/question/1437490

#SPJ1