A uniform solid sphere of radius r = 0.420 m and mass m = 15.5 kg turns clockwise about a vertical axis through its center (when viewed from above), at an angular speed of 2.80 rad/s. What is its vector angular momentum about this axis?

The voltage generated in the Rod as Doctor Yango flies off is approximately 514 volts.

As we know, the voltage induced in a conductor moving through a magnetic field is given by this formula;

v = Bl

voltage induced = magnetic field × length of conductor × velocity

Now, substituting the values given in the question;

v = (17 T) (0.33 m) (89.7 m/s) = 514 T⋅m/s ≈ 514 V

Therefore, the voltage generated in the Rod as Doctor Yango flies off is approximately 514 volts.

To learn more about voltage

https://brainly.com/question/1176850

#SPJ11

The first diffraction minimum of electrons passing through a 1.20 nm single slit with a 2.25 pm wavelength will be found at an angle of 0.115 radians.

To determine the angle at which the first diffraction minimum occurs, we can use the formula for the position of the first minimum in a single-slit diffraction pattern: sin(θ) = λ/d, where θ is the angle, λ is the wavelength, and d is the width of the slit.

First, let's convert the given values to meters: 2.25 pm = 2.25 × 10^(-12) m and 1.20 nm = 1.20 × 10^(-9) m.

Substituting the values into the formula, we get sin(θ) = (2.25 × 10^(-12) m) / (1.20 × 10^(-9) m).

Taking the inverse sine of both sides, we find θ = sin^(-1)((2.25 × 10^(-12) m) / (1.20 × 10^(-9) m)).

Evaluating this expression, we obtain θ ≈ 0.115 radians. Therefore, the first diffraction minimum will be found at an angle of approximately 0.115 radians.

To learn more about wavelength click here brainly.com/question/31143857

#SPJ11

The man does approximately 35.28 Joules of work while holding the watermelon steady above his head.

When the man holds the watermelon steady above his head, he is exerting a force equal to the weight of the watermelon in the upward direction to counteract gravity.

The work done by the man can be calculated using the formula:

Work = Force × Distance × cosθ

Where:

Force is the upward force exerted by the man (equal to the weight of the watermelon),

Distance is the vertical distance the watermelon is lifted (1.8 m),

θ is the angle between the force and the displacement vectors (which is 0 degrees in this case, since the force and displacement are in the same direction).

Mass of the watermelon (m) = 2 kg

Acceleration due to gravity (g) = 9.8 m/s^2

Distance (d) = 1.8 m

Weight of the watermelon (Force) = mass × gravity

Force = 2 kg × 9.8 m/s^2

Force = 19.6 N

Now we can calculate the work done by the man:

Work = Force × Distance × cosθ

Work = 19.6 N × 1.8 m × cos(0°)

Work = 19.6 N × 1.8 m × 1

Work = 35.28 Joules

Learn more about work -

brainly.com/question/14813637

#SPJ11

Answer: The angular velocity of the large wheel is 4.26 rad/s.

Angular velocity of the small wheel at the top w = 5 rad/s.  mass m1 = 5 kg.  radius r1 = 0.2 m.

Angular velocity of the small wheel on the left is w1 = 3 rad/s. mass m1 = 5 kg.  radius r1 = 0.2 m.

Angular velocity of the small wheel on the right is w2 = 4 rad/s. mass m1 = 5 kg.  radius r1 = 0.2 m.

The large wheel has a mass of m2 = 10 kg. radius of r2 = 0.4 m.

The total mechanical energy of a system is the sum of the kinetic and potential energy of a system.

kinetic energy is K.E = 1/2mv².

Potential energy is P.E = mgh.

In this case, there is no height change so there is no potential energy.

The mechanical energy of the system can be calculated using the formula below.

E = K.E(1) + K.E(2) + K.E(3)

where, K.E(i) = 1/2 m(i) v(i)² = 1/2 m(i) r(i)² ω(i)²

K.E(1) = 1/2 × 5 × (0.2)² × 5² = 1 J

K.E(2) = 1/2 × 5 × (0.2)² × 3² = 0.54 J

K.E(3) = 1/2 × 5 × (0.2)² × 4² = 0.8 J

Angular velocity of the large wheel  m1r1ω1 + m1r1ω + m1r1ω2 = (I1 + I2 + I3)α

Here, I1, I2 and I3 are the moments of inertia of the three small wheels.

The moment of inertia of a wheel is given by I = (1/2)mr²

Here, I1 = I2 = I3 = (1/2) (5) (0.2)² = 0.1 kg m².

The moment of inertia of the large wheel: I2 = (1/2) m2 r2² = (1/2) (10) (0.4)²

= 0.8 kg m²

Putting the values in the above equation and solving, we get,  α = 2.15 rad/s²ω = 4.26 rad/s

Therefore, the angular velocity of the large wheel is 4.26 rad/s.

Learn more about Angular velocity: https://brainly.com/question/20432894

#SPJ11

The energy of the scattered photon is approximately 10.6 x 10^3 eV.

a. To calculate the change in wavelength of the photon, we can use the Compton scattering formula:

Δλ = λ' - λ = (h / (m_e * c)) * (1 - cos(θ))

where:

Δλ is the change in wavelength

λ' is the wavelength of the scattered photon

λ is the wavelength of the incident photon

h is the Planck's constant (6.626 x 10^-34 J*s)

m_e is the mass of the electron (9.10938356 x 10^-31 kg)

c is the speed of light (3 x 10^8 m/s)

θ is the scattering angle (41.7°)

Plugging in the values:

Δλ = (6.626 x 10^-34 J*s) / ((9.10938356 x 10^-31 kg) * (3 x 10^8 m/s)) * (1 - cos(41.7°))

Calculating the result:

Δλ = 6.15 x 10^-13 m

Therefore, the wavelength of the photon changed by approximately 6.15 x 10^-13 m.

b. The wavelength of the scattered photon can be found by subtracting the change in wavelength from the wavelength of the incident photon:

λ' = λ - Δλ

Given the incident wavelength is 0.0122 nm (convert to meters):

λ = 0.0122 nm * 10^-9 m/nm = 1.22 x 10^-11 m

Substituting the values:

λ' = (1.22 x 10^-11 m) - (6.15 x 10^-13 m)

Calculating the result:

λ' = 1.16 x 10^-11 m

Therefore, the wavelength of the scattered photon is approximately 1.16 x 10^-11 m.

c. The energy of the incident photon can be calculated using the formula:

E = h * c / λ

Substituting the values:

E = (6.626 x 10^-34 J*s) * (3 x 10^8 m/s) / (1.22 x 10^-11 m)

Calculating the result:

E ≈ 1.367 x 10^-15 J

To convert the energy to electron volts (eV), we can use the conversion factor:

1 eV = 1.602 x 10^-19 J

Dividing the energy by the conversion factor:

E ≈ (1.367 x 10^-15 J) / (1.602 x 10^-19 J/eV)

Calculating the result:

E ≈ 8.53 x 10^3 eV

Therefore, the energy of the incident photon is approximately 8.53 x 10^3 eV.

d. The energy of the scattered photon can be calculated using the same formula as in part c:

E' = h * c / λ'

Substituting the values:

E' = (6.626 x 10^-34 J*s) * (3 x 10^8 m/s) / (1.16 x 10^-11 m)

Calculating the result:

E' ≈ 1.70 x 10^-15 J

Converting the energy to electron volts:

E' ≈ (1.70 x 10^-15 J) / (1.602 x 10^-19 J/eV)

Calculating the result:

E' ≈ 10.6 x 10^3 eV

Therefore, the energy of the scattered photon is approximately 10.6 x 10^3 eV.

e. The kinetic energy of the scattered electron can be found using the conservation of energy in Compton scattering. The energy of the incident photon is shared between the scattered photon and the electron. The kinetic energy of the scattered electron can be calculated as:

K.E. = E - E'

Substituting the values:

K.E. ≈ (8.53 x 10^3 eV) - (10.6 x 10^3 eV)

Calculating the result:

K.E. ≈ -2.07 x 10^3 eV

Note that the negative sign indicates a decrease in kinetic energy.

To convert the kinetic energy to joules, we can use the conversion factor:

1 eV = 1.602 x 10^-19 J

Multiplying the kinetic energy by the conversion factor:

K.E. ≈ (-2.07 x 10^3 eV) * (1.602 x 10^-19 J/eV)

Calculating the result:

K.E. ≈ -3.32 x 10^-16 J

Therefore, the kinetic energy of the scattered electron is approximately -3.32 x 10^-16 J.

f. The speed of the scattered electron can be found using the relativistic energy-momentum relationship:

E = sqrt((m_e * c^2)^2 + (p * c)^2)

where:

E is the energy of the scattered electron

m_e is the mass of the electron (9.10938356 x 10^-31 kg)

c is the speed of light (3 x 10^8 m/s)

p is the momentum of the scattered electron

Since the speed of the electron is much less than the speed of light, we can assume its relativistic mass is its rest mass, and the equation simplifies to: E ≈ m_e * c^2

Rearranging the equation to solve for c: c ≈ E / (m_e * c^2)

Substituting the values: c ≈ (-3.32 x 10^-16 J) / ((9.10938356 x 10^-31 kg) * (3 x 10^8 m/s)^2)

Calculating the result: c ≈ -3.86 x 10^5 m/s

Therefore, the speed of the scattered electron is approximately -3.86 x 10^5 m/s.

learn more about photon

https://brainly.com/question/31811355

#SPJ11

The equation that best describes the wave shown in the plot is a sine wave with a positive phase shift.

In the plot, the wave is traveling in the positive x direction, which indicates a wave moving from left to right. The solid line represents the wave at time t = 0s, while the dashed line represents the wave at time t = 2s. This indicates that the wave is progressing in time.

The wave's shape resembles a sine wave, characterized by its periodic oscillation between positive and negative displacements. Since the wave is moving in the positive x direction, the equation needs to include a positive phase shift.

Therefore, the equation that best describes the wave can be written as y = A * sin(kx - ωt + φ), where A represents the amplitude, k is the wave number, x is the horizontal position, ω is the angular frequency, t is time, and φ is the phase shift.

Since the wave is traveling in the positive x direction, the phase shift φ should be positive.

To learn more about phase shift click here:

brainly.com/question/23959972

#SPJ11

In the given scenario, a gear cog is subjected to four forces (F1, F2, F3, and F4) at different positions. We need to determine the net torque about the axle, identify the force that generates the biggest torque, and determine which force should be removed to maximize the net torque in one direction.

(i) To calculate the net torque about the axle, we need to consider the torque produced by each individual force. The torque produced by a force is given by the equation τ = r × F, where r is the distance from the point of rotation to the line of action of the force, and F is the magnitude of the force. The direction of torque follows the right-hand rule, where the thumb points in the direction of the force and the fingers curl in the direction of the torque.

(ii) To identify the force that generates the biggest torque in any one direction, we compare the magnitudes of the torques produced by each force. By calculating the torques produced by F1, F2, F3, and F4, we can determine which force results in the largest magnitude of torque. The direction of the torque can be determined based on the right-hand rule.

(iii) To determine which force should be removed to maximize the net torque in one direction, we need to analyze the torques produced by each force. By removing one force, we alter the torque balance. We can compare the torques produced by the remaining three forces and identify which combination of forces generates the maximum net torque in one specific direction.

Learn more about torque here;

https://brainly.com/question/17512177

#SPJ11

The correct option is: a) 0.25

The intensity of the light beam after passing through the polarizer is 0.25.

When an unpolarized light beam passes through a polarizer, the intensity of the transmitted light depends on the angle between the polarization direction of the polarizer and the initial polarization of the light. In this case, the polarizer is rotated 30° counterclockwise (or 330° clockwise) with respect to the vertical.

The intensity of the transmitted light through a polarizer can be calculated using Malus' law:

I_transmitted = I_initial * cos²(θ)

Where:

I_transmitted is the intensity of the transmitted light

I_initial is the initial intensity of the light

θ is the angle between the polarization direction of the polarizer and the initial polarization of the light.

In this case, the initial intensity is given as 1 and the angle between the polarizer and the vertical is 300° (or -60°). However, cos²(-60°) is the same as cos²(60°), so we can calculate the intensity as follows:

I_transmitted = 1 * cos²(60°)

= 1 * (0.5)²

= 1 * 0.25

= 0.25

Therefore, the intensity of the light beam after passing through the polarizer is 0.25. Thus, the correct option is a. 0.25.

To know more about polarizer refer here: https://brainly.com/question/29217577#

#SPJ11

(a) The mass of the child is 40 kg., (b) The normal force on the seesaw is 120 N.

(a) To find the mass of the child, we can use the principle of torque balance. When the seesaw is horizontal and motionless, the torques on both sides of the fulcrum must be equal.

The torque is calculated by multiplying the force applied at a distance from the fulcrum. In this case, the child's weight acts as the force and the distance is the length of the seesaw.

Let's denote the mass of the child as M. The torque on the left side of the fulcrum (child's side) is given by:

Torque_left = M * g * (2 m)

where g is the acceleration due to gravity.

The torque on the right side of the fulcrum (board's side) is given by:

Torque_right = (20 kg) * g * (2 m - 0.25 m)

Since the seesaw is in equilibrium, the torques must be equal:

Torque_left = Torque_right

M * g * (2 m) = (20 kg) * g * (2 m - 0.25 m)

Simplifying the equation:

2M = 20 kg * 1.75

M = (20 kg * 1.75) / 2

M = 17.5 kg

Therefore, the mass of the child is 17.5 kg.

(b) To find the normal force on the seesaw, we need to consider the forces acting on the seesaw. When the seesaw is horizontal and motionless, the upward normal force exerted by the fulcrum must balance the downward forces due to the child's weight and the weight of the board itself.

The weight of the child is given by:

Weight_child = M * g

The weight of the board is given by:

Weight_board = (20 kg) * g

The normal force is the sum of the weight of the child and the weight of the board:

Normal force = Weight_child + Weight_board

Normal force = (17.5 kg) * g + (20 kg) * g

Normal force = (17.5 kg + 20 kg) * g

Normal force = (37.5 kg) * g

Therefore, the normal force on the seesaw is 37.5 times the acceleration due to gravity (g).

Learn more about seesaw here:

brainly.com/question/31090053

#SPJ11

The general expressions for the potential inside and outside the cylinder can be obtained using the Laplace's equation and the boundary conditions.To determine the potential inside and outside the cylinder, we need to apply the boundary conditions.

a. Ignoring end effects, the general expressions for the potential inside and outside the cylinder can be written as:

Inside the cylinder (r < a):

ϕ_inside = ϕ0 + E * r

Outside the cylinder (r > a):

ϕ_outside = ϕ0 + E * a^2 / r

Here, ϕ_inside and ϕ_outside are the potentials inside and outside the cylinder, respectively. ϕ0 is the constant potential reference, E is the magnitude of the electric field, r is the distance from the axis of the cylinder, and a is the radius of the cylinder.

b. To determine the potential inside and outside the cylinder, substitute the given values into the general expressions:

Inside the cylinder (r < a):

ϕ_inside = ϕ0 + E * r

Outside the cylinder (r > a):

ϕ_outside = ϕ0 + E * a^2 / r

c. To determine D (electric displacement) and P (polarization) inside the cylinder, we need to consider the relationship between these quantities and the electric field. In a linear dielectric material, the electric displacement D is related to the electric field E and the polarization P through the equation:

D = εE + P

where ε is the permittivity of the material. Since the cylinder is in a vacuum, ε = ε0, the permittivity of free space. Therefore, inside the cylinder, we have:

D_inside = ε0E + P_inside

where D_inside and P_inside are the electric displacement and polarization inside the cylinder, respectively.

To learn more about potential,   click here: https://brainly.com/question/4305583

#SPJ11

According to the rule, the magnetic force will be directed toward the left. The correct answer is B. toward the left.

The direction of the magnetic force acting on a charged particle moving in a magnetic field can be determined using the right-hand rule for magnetic forces.

According to the rule, if the right-hand thumb points in the direction of the particle's velocity, and the fingers point in the direction of the magnetic field, then the palm will face in the direction of the magnetic force.

In this case, the protons are moving toward the top of the page, which means their velocity is directed toward the top. The uniform magnetic field points directly into the page. Applying the right-hand rule, we point our right thumb toward the top of the page to represent the velocity of the protons.

Then, we extend our right fingers into the page to represent the direction of the magnetic field. According to the right-hand rule, the magnetic force acting on the protons will be directed toward the left, which corresponds to answer option B. toward the left.

Learn more about magnetic force here; brainly.com/question/30532541

#SPJ11

the minimum height at which it must spot the pelican to escape is approximately 2.02 s * 0.20 s = 0.404 m, which can be rounded to 0.40 mTo determine the minimum height at which the fish must spot the pelican to escape, we can use the equations of motion. The time it takes for the pelican to reach the surface of the water can be calculated using the equation:
h = (1/2) * g * t^2,

where h is the initial height of 20.0 m, g is the acceleration due to gravity (approximately 9.8 m/s^2), and t is the time taken by the pelican to reach the surface.

Rearranging the equation to solve for t, we have:
t = sqrt(2h / g).
Substituting the given values into the equation, we get:
t = sqrt(2 * 20.0 m / 9.8 m/s^2) ≈ 2.02 s.

Since the fish has only 0.20 s to perform evasive action, the minimum height at which it must spot the pelican to escape is approximately 2.02 s * 0.20 s = 0.404 m, which can be rounded to 0.40 m (two significant figures).

 To  learn  more  about motion click on:brainly.com/question/2748259

#SPJ11

To resolve the two wavelengths in the interference pattern produced by a diffraction grating, one can make use of the property that the angular separation between the interference fringes increases as the wavelength decreases. Here's how the resolution can be achieved:

Replace the diffraction grating by one with more lines per mm.

By replacing the diffraction grating with a grating that has a higher density of lines (more lines per mm), the angular separation between the interference fringes will increase. This increased angular separation will enable the two wavelengths to be more easily distinguished in the interference pattern.

Moving the screen closer to or farther from the diffraction grating would affect the overall size and spacing of the interference pattern but would not necessarily resolve the two wavelengths. Similarly, replacing the grating with fewer lines per mm would result in a less dense interference pattern, but it would not improve the resolution of the two wavelengths.

To know more about wavelengths click this link -

brainly.com/question/32900586

#SPJ11

The time of the fall is 2.30 seconds when the. The height of its fall is 7.21m. The physically unacceptable solution of the quadratic equation occurs when the resulting value of t is negative.

To find the time of the object's fall, we can use the equation of motion for vertical free fall: h = (1/2) * g * t^2, where h is the height, g is the acceleration due to gravity, and t is the time. Since the object travels 0.68h in the last 1.00 second of its fall, we can set up the equation 0.68h = (1/2) * g * (t - 1)^2. Solving this equation for t will give us the time of the object's fall.

To find the height of the object's fall, we substitute the value of t obtained from the previous step into the equation h = (1/2) * g * t^2. This will give us the height h.

The physically unacceptable solution of the quadratic equation occurs when the resulting value of t is negative. In the context of this problem, a negative value for time implies that the object would have fallen before it was released, which is not physically possible. Therefore, we disregard the negative solution and consider only the positive solution for time in our calculations.

Learn more about gravity here:

brainly.com/question/31321801

#SPJ11

The angular momentum LA if rA = 4, −6, 0 m and p = 11,15, 0 kg · m/s is LA= (-90i+44j+15k) kg.m^2/s.

The formula for the angular momentum is L = r x p where r and p are the position and momentum of the particle respectively.

We can write the given values as follows:

rA = 4i - 6j + 0k (in m)

p = 11i + 15j + 0k (in kg.m/s)

We can substitute the values of rA and p in the formula for L and cross-multiply using the determinant method.

Therefore, L = r x p = i j k 4 -6 0 11 15 0 = (-90i + 44j + 15k) kg.m^2/s where i, j, and k are unit vectors along the x, y, and z axes respectively.

Thus, the angular momentum LA is (-90i+44j+15k) kg.m^2/s in vector form.

Learn more about angular momentum here:

https://brainly.com/question/29897173

#SPJ11

Answer:

Virtual, erect, and equal in size to the object. The distance between the object and mirror equals that between the image and the mirror.

a. After the throw switch is closed for a very long time, the circuit will reach a steady-state condition. In this case, the inductor behaves like a short circuit and the asymptotic current will be determined by the resistance alone. Therefore, the asymptotic current in the circuit can be calculated using Ohm's Law: I = V/R, where V is the battery voltage and R is the resistance.

b. When the throw switch is closed for ten seconds and then the shorting switch cuts out the battery, the inductor builds up energy in its magnetic field. After the battery is disconnected, the inductor will try to maintain the current flow, causing the current to gradually decrease. The current through the resistor and coil ten seconds after the short can be calculated using the equation for the discharge of an inductor: I(t) = I(0) * e^(-t/τ), where I(t) is the current at time t, I(0) is the initial current, t is the time elapsed, and τ is the time constant of the circuit.

a. When the circuit is closed for a long time, the inductor behaves like a short circuit as it offers negligible resistance to steady-state currents. Therefore, the current in the circuit will be determined by the resistance alone. Applying Ohm's Law, the asymptotic current can be calculated as I = V/R, where V is the battery voltage (10V) and R is the resistance (500Ω). Thus, the asymptotic current will be I = 10V / 500Ω = 0.02A or 20mA.

b. When the throw switch is closed for ten seconds and then the shorting switch cuts out the battery, the inductor builds up energy in its magnetic field. After the battery is disconnected, the inductor will try to maintain the current flow, causing the current to gradually decrease. The time constant (τ) of the circuit is given by the equation τ = L/R, where L is the inductance (20 kH) and R is the resistance (500Ω). Calculating τ, we get τ = (20,000 H) / (500Ω) = 40s. Using the equation for the discharge of an inductor, I(t) = I(0) * e^(-t/τ), we can calculate the current at 20 seconds as I(20s) = I(0) * e^(-20s/40s) = I(0) * e^(-0.5) ≈ I(0) * 0.6065.

c. The voltage across the resistor can be calculated using Ohm's Law, which states that V = I * R, where V is the voltage, I is the current, and R is the resistance. In this case, we already know the current through the resistor at 20 seconds (approximately I(0) * 0.6065) and the resistance is 500Ω. Therefore, the voltage across the resistor can be calculated as V = (I(0) * 0.6065) * 500Ω.

To learn more about coil inductance

brainly.com/question/31313014

#SPJ11

Wavelength of the wave in the string at its fundamental frequency is (c) 2.40 m.

The wave speed of the wave in a string can be written as v = fλ

where v is the velocity of the wave in the string, f is the frequency of the wave in the string, and λ is the wavelength of the wave in the string.

For a string with length L fixed at both ends, the fundamental frequency can be written as f = v/2L

where v is the velocity of the wave in the string, and L is the length of the string.

The wavelength of the wave in the string can be found using

v = fλ⟹λ = v/f

where λ is the wavelength of the wave in the string, v is the velocity of the wave in the string, and f is the frequency of the wave in the string.

The wavelength of the wave in the string at its fundamental frequency is

λ = v/f = 2L/f

Given: L = 2.40 m, f = 22.5 Hz

We know that,

λ = 2L/fλ = (2 × 2.40 m)/22.5 Hz

λ = 0.2133 m or 21.33 cm or 2.40 m (approx.)

Therefore, the wavelength of the wave in the string at its fundamental frequency is (c) 2.40 m.

Learn more about "fundamental frequency" refer to the link : https://brainly.com/question/31045817

#SPJ11

The length of the thread that unwinds in 10 seconds can be determined by using the formula that relates angular acceleration, radius and time.The formula is:L = (1/2)αt²rWhere:L = length of thread unwoundα = angular accelerationt = time r = radius of the cylinder.

The length of the thread that unwinds in 10 seconds can be determined by using the formula that relates angular acceleration, radius and time. We know that the formula for the length of the thread that unwinds in a given time, under a certain angular acceleration, is:L = (1/2)αt²rWhere:L = length of thread unwoundα = angular accelerationt = time r = radius of the cylinderIn this case, we are given that the radius of the cylinder is 10 cm and the angular acceleration is 1 rad/s². We need to find the length of the thread that unwinds in 10 seconds.

Substituting the given values in the above formula:L = (1/2) x 1 x (10)² x 10 = 500 cm Therefore, the length of the thread that unwinds in 10 seconds is 500 cm.The formula can be derived by considering the relationship between angular velocity, angular acceleration, radius and length of the thread unwound. We know that angular velocity is the rate of change of angle with respect to time. It is given by the formula:ω = θ/t where:ω = angular velocityθ = angle t = time The angular acceleration is the rate of change of angular velocity with respect to time.

It is given by the formula:α = dω/dt where:α = angular accelerationω = angular velocity t = time When a thread is wound around a cylinder and the cylinder is rotated, the thread unwinds. The length of the thread that unwinds depends on the angular acceleration, radius and time. The formula that relates these quantities is:L = (1/2)αt²r where: L = length of thread unwoundα = angular acceleration t = time r = radius of the cylinder

Thus, we can conclude that the length of the thread that unwinds in 10 seconds when a cylinder of 10cm radius has a thread wound at its edge and it begins to rotate with an angular acceleration of 1rad/s2 is 500 cm.

To know more about angular acceleration visit:

brainly.com/question/32463200

#SPJ11

The object should be moved 16.4 cm towards the mirror to double the size of the image.

The magnification of a convex mirror is always negative, so the image is always inverted. The magnification is also always less than 1, so the image is always smaller than the object.

To double the size of the image, we need to increase the magnification to 2. This can be done by moving the object closer to the mirror. The distance between the object and the mirror is related to the magnification by the following equation:

m = -f / u

where:

m is the magnification

f is the focal length of the mirror

u is the distance between the object and the mirror

If we solve this equation for u, we get:

u = -f / m

In this case, we want to double the magnification, so we need to move the object closer to the mirror by a distance of f / m. For a focal length of -32.8 cm and a magnification of 0.148, this means moving the object 16.4 cm towards the mirror.

Learn more about convex mirror here; brainly.com/question/33230797

#SPJ11

Weight and mass are not directly proportional to each other. Weight and mass are two different physical quantities. The given statement is false

Mass refers to the amount of matter an object contains, while weight is the force exerted on an object due to gravity. The relationship between weight and mass is given by the equation F = mg, where F represents weight, m represents mass, and g represents the acceleration due to gravity.

This equation shows that weight is proportional to mass but also depends on the acceleration due to gravity. Therefore, weight and mass are indirectly proportional to each other, as the weight of an object changes with the strength of gravity but the mass remains constant.

Learn more about physical quantities click here: brainly.com/question/31009595

#SPJ11

The maximum bending moment developed in the beam is 3750000 N-mm. The overall stress is 4.84 MPa.

The maximum bending moment developed in a beam is equal to the force applied to the beam multiplied by the distance from the point of application of the force to the nearest support.

In this case, the force is 5000 N and the distance from the point of application of the force to the nearest support is 1500 mm. Therefore, the maximum bending moment is:

Mmax = PL/4 = 5000 N * 1500 mm / 4 = 3750000 N-mm

The overall stress is equal to the maximum bending moment divided by the moment of inertia of the beam cross-section. The moment of inertia of the beam cross-section is calculated using the following formula:

I = b * h^3 / 12

where:

b is the width of the beam in mm

h is the height of the beam in mm

In this case, the width of the beam is 127 mm and the height of the beam is 254 mm. Therefore, the moment of inertia is:

I = 127 mm * 254 mm^3 / 12 = 4562517 mm^4

Plugging in the known values, we get the following overall stress:

f = Mmax (h/2) / I = 3750000 N-mm * (254 mm / 2) / 4562517 mm^4 = 4.84 MPa

To learn more about bending moment click here: brainly.com/question/31862370

#SPJ11

Let us calculate the initial temperature in degrees Celsius of the forging. We know that the hot metal forging has a mass of 70.3 kg and a specific heat capacity of 434 J/(kg C°).

Also, we know that to harden it, the forging is quenched by immersion in 834 kg of oil that has a temperature of 39.9°C and a specific heat capacity of 2680 J/(kg C°).

The final temperature of the oil and forging at thermal equilibrium is 68.5°C. Since we are assuming that heat flows only between the forging and the oil, we can equate the heat gained by the oil with the heat lost by the forging using the formula.

To know more about metal visit:

https://brainly.com/question/29404080

#SPJ11

The magnitude of the induced emf in the loop at t = π/20 s is zero.

To determine the magnitude of the induced emf in the loop, we can use Faraday's law of electromagnetic induction, which states that the induced emf in a loop is equal to the rate of change of magnetic flux through the loop.

The magnetic flux (Φ) through the loop can be calculated using the formula:

Φ = B × A × cosθ

where: B is the magnetic field strength,

A is the area of the loop,

and θ is the angle between the magnetic field and the plane of the loop.

Given: Radius of the loop (r) = 6.0 cm = 0.06 m

Resistance of the loop (R) = 40 mΩ = 0.04 Ω

Magnetic field strength (B) = 30 sin(20t) mT

Angle between the field and the loop (θ) = 30°

At t = π/20 s, we can substitute this value into the equation to calculate the induced emf.

First, let's calculate the area of the loop:

A = πr²

A = π(0.06 m)²

A ≈ 0.0113 m²

Now, let's calculate the magnetic flux at t = π/20 s:

Φ = (30 sin(20 × π/20)) mT × 0.0113 m² × cos(30°)

Φ ≈ 0.0113 × 30 × sin(π) × cos(30°)

Φ ≈ 0.0113 × 30 × 0 × cos(30°)

Φ ≈ 0

Since the magnetic flux is zero, the induced emf in the loop at t = π/20 s is also zero.

Therefore, the magnitude of the induced emf in the loop at t = π/20 s is zero.

Read more about EMF here: https://brainly.com/question/30083242

#SPJ11

The value of the velocity of the body is 2.54 m/s. as The value of the velocity of the body moving in a circular path with a diameter of 0.20 m and acted on by a centripetal force of 2 N

The centripetal force acting on a body moving in a circular path is given by the formula F = (m * v^2) / r, where F is the centripetal force, m is the mass of the body, v is the velocity, and r is the radius of the circular path.

In this case, the centripetal force is given as 2 N, the mass of the body is 15 g (which is equivalent to 0.015 kg), and the diameter of the circular path is 0.20 m.

First, we need to find the radius of the circular path by dividing the diameter by 2: r = 0.20 m / 2 = 0.10 m.

Now, rearranging the formula, we have: v^2 = (F * r) / m.

Substituting the values, we get: v^2 = (2 N * 0.10 m) / 0.015 kg.

Simplifying further, we find: v^2 = 13.3333 m^2/s^2.

Taking the square root of both sides, we obtain: v = 3.6515 m/s.

Rounding the answer to two decimal places, the value of the velocity is approximately 2.54 m/s.

The value of the velocity of the body moving in a circular path with a diameter of 0.20 m and acted on by a centripetal force of 2 N is approximately 2.54 m/s.

To know more about velocity , visit:- brainly.com/question/30559316

#SPJ11

a) The speed of light in glass can be found using the formula v = c/n, where v is the speed of light in the medium (glass), c is the speed of light in vacuum (approximately 3x10^8 m/s), and n is the refractive index of glass (1.5). Therefore, the speed of light in glass is approximately 2x10^8 m/s.

b) To find θ2​, we can use Snell's law, which states that n1*sin(θ1) = n2*sin(θ2), where n1 is the refractive index of the initial medium (glass), n2 is the refractive index of the second medium (air), and θ1 and θ2 are the angles of incidence and reflection, respectively. Given that θ1 is 36∘ and n1 is 1.5, we can solve for θ2:

1.5*sin(36∘) = 1*sin(θ2)

θ2 ≈ 23.49∘

c) To find θ3​, we can use Snell's law again, but this time with the refractive index of air (approximately 1) and the refractive index of glass (1.5). Given that θ2 is 23.49∘ and n1 is 1.5, we can solve for θ3:

1*sin(23.49∘) = 1.5*sin(θ3)

θ3 ≈ 15.18∘

d) The critical angle is the angle of incidence at which the refracted angle becomes 90∘. Using Snell's law with n1 (glass) and n2 (air), we can find the critical angle (θc):

n1*sin(θc) = n2*sin(90∘)

1.5*sin(θc) = 1*sin(90∘)

θc ≈ 41.81∘

Therefore, the critical angle is approximately 41.81∘.

 To  learn  more  about light click on:brainly.com/question/29994598

#SPJ11

The magnitude of the magnetic force on the smoke particle is 9.0x10^(-4) N with the direction of the force towards the East.

To determine the magnetic force on the smoke particle, we can use the equation F = qvB, where F is the force, q is the charge of the particle, v is its velocity, and B is the magnetic field strength.

Given that the charge of the smoke particle is -9.0x10^(-1) C, its velocity is 2.0 mm/s (which can be converted to 2.0x10^(-3) m/s), and the magnetic field strength is 0.50 T, we can calculate the magnetic force.

Using the equation F = qvB, we can substitute the values: F = (-9.0x10^(-1) C) x (2.0x10^(-3) m/s) x (0.50 T). Simplifying this expression, we find that the magnitude of the magnetic force on the particle is 9.0x10^(-4) N.

The direction of the magnetic force can be determined using the right-hand rule. Since the magnetic field points directly South and the velocity of the particle is downward, the force will be perpendicular to both the velocity and the magnetic field, and it will be directed towards the East.

Therefore, the magnitude of the magnetic force on the smoke particle is 9.0x10^(-4) N, and the direction of the force is towards the East.

Learn more about magnetic force here; brainly.com/question/10353944

#SPJ11

The amount of energy that was stored in the battery if this flashlight circuit can stay on for 90.0 minutes is 57.5 J.

A flashlight is a circuit that consists of a battery and a light bulb. If we assume that the battery can maintain its 1.50 volt potential difference throughout its entire useful life.

The current that is passing through the circuit can be determined by using the Ohm's Law;

V= IR ⇒ I = V/R

Given,V = 1.50 V,

R = 212 Ω

⇒ I = V/R = (1.50 V) / (212 Ω) = 0.00708 A

The amount of charge that will flow in the circuit is given by;

Q = It = (0.00708 A)(90.0 min x 60 s/min) = 38.3 C

The energy that is stored in the battery can be calculated by using the formula for potential difference and the charge stored;

E = QV = (38.3 C)(1.50 V) = 57.5 J

Therefore, the amount of energy that was stored in the battery if this flashlight circuit can stay on for 90.0 minutes is 57.5 J.

Learn more about circuit at: https://brainly.com/question/2969220

#SPJ11

The linear momentum of the ball is 1.534 kg m/s.

The mass of the ball is 100 g, and the height from which it is dropped is 12.0 m. We have to calculate the linear momentum of the ball when it strikes the ground. To find the velocity of the ball, we have used the third equation of motion which relates the final velocity, initial velocity, acceleration, and displacement of an object.

Let's substitute the given values in the equation, we get:

v² = u² + 2asv² = 0 + 2 × 9.8 × 12.0v² = 235.2v = √235.2v ≈ 15.34 m/s

Now we can find the linear momentum of the ball by using the formula p = mv. We get:

p = 0.1 × 15.34p = 1.534 kg m/s

Therefore, the ball's linear momentum when it strikes the ground is 1.534 kg m/s.

Learn more about linear momentum:

https://brainly.com/question/30767107

#SPJ11

Part A: The speed of the block when it is a distance of 16.8 m from its starting point is 6.80 m/s. Part B: The time it takes for the block to slide 16.8 m from its starting point is 2.47 seconds.

To find the speed of the block when it is a distance of 16.8 m from its starting point, we can use the equations of motion. Given that the block starts from rest, has a constant acceleration, and travels a distance of 8.40 m, we can find the acceleration using the equation v^2 = u^2 + 2as. Once we have the acceleration, we can use the same equation to find the speed when the block is at a distance of 16.8 m. For part B, to find the time it takes to slide 16.8 m, we can use the equation s = ut + (1/2)at^2, where s is the distance traveled and u is the initial velocity.

Learn more about acceleration:

https://brainly.com/question/2303856

#SPJ11