(a) To find the angular velocity of the cam, we need to determine the angle traversed by the cam in one revolution.
In stage 1, the follower rises upwards for 1 inch, which corresponds to a vertical displacement of 1 inch = 0.0833 feet. Since the follower rises in 0.5 seconds, the average velocity during this stage is 0.0833 ft / 0.5 s = 0.1666 ft/s.
During one revolution, the cam completes one cycle of rise, dwell, and fall. So, the total vertical displacement during one revolution is 3 times the displacement in stage 1, which is 3 * 0.0833 ft = 0.2499 ft.
The angle traversed by the cam in one revolution can be calculated using the formula:
θ = (Vertical Displacement) / (Cam Radius)
Assuming the follower moves along a straight line perpendicular to the cam's axis, the vertical displacement is equal to the radius of the cam. Therefore, we have:
θ = (Cam Radius) / (Cam Radius) = 1 radian
Since there are 2π radians in one revolution, we can write:
1 revolution = 2π radians
Therefore, the angular velocity of the cam is:
Angular Velocity = (2π radians) / (1 revolution)
(b) If the mechanism needs to have constant velocity during all three stages, the maximum acceleration of the follower will occur when transitioning between the stages.
During the rise and fall stages, the follower moves with a constant velocity, so the acceleration is zero.
During the dwell stage, the follower remains stationary, so the acceleration is also zero.
Therefore, the maximum acceleration of the follower is zero.
(c) If the mechanism needs to have constant acceleration during all three stages, the maximum velocity of the follower for each stage can be determined using the equation of motion:
v^2 = u^2 + 2as
where v is the final velocity, u is the initial velocity, a is the acceleration, and s is the displacement.
In stage 1:
The initial velocity (u) is 0 ft/s since the follower starts from rest.
The displacement (s) is 1 inch = 0.0833 ft.
The time (t) is 0.5 s.
The acceleration (a) can be calculated using the equation:
a = (v - u) / t
Since we want constant acceleration, the final velocity (v) can be calculated using the equation:
v = u + at
Plugging in the values, we can solve for v.
Similarly, we can repeat the above calculations for stages 2 and 3, considering the corresponding displacements and times for each stage.
Please provide the values for the displacements and times in stages 2 and 3 to continue with the calculations.
Learn more about angular velocity here:
https://brainly.com/question/32217742
#SPJ11
The manufacturer of a component that will be subjected to fatigue from -0 MPa to 50 MPa, specifies that it must be changed when it has been detected that the crack has advanced up to 40% of its critical value. The manufacturing process of the component leaves cracks on the surface of 0.1mm. The material has the following properties: KIC = 70MPam1/2 and crack growth is characterized by n=3.1 and C= 10E-11. Assume f=1.12.
How many life cycles did the component have left after it had been removed as directed by the manufacturer?
Indicate your answer without decimals.
Fatigue is the weakening of a material caused by cyclic loading, resulting in the formation and propagation of cracks.
Fatigue fracture failure is a type of failure that is caused by cyclic loading, which is the progressive growth of an initial crack until it reaches a critical size and a fracture occurs. In this question, we are given the following information.
The manufacturing process of the component leaves cracks on the surface of 0.1mm.The material has the following properties: [tex]KIC = 70 MPam1/2[/tex], and crack growth is characterized by n = 3.1 and C = 10E-11. Assume f = 1.12.Calculations:In this question.
To know more about propagation visit:
https://brainly.com/question/33454861
#SPJ11
A six-lane freeway (three lanes in each direction) has regular weekday uses and currently operates at maximum LOS C conditions. The lanes are 3.3 m wide, the right-side shoulder is 1.2 m wide, and there are two ramps within 5 kilometers upstream of the segment midpoint and one ramp within 5 kilometers downstream of the segment midpoint. The highway is on rolling terrain with 10% large trucks and buses (no recreational vehicles), and the peak-hour factor is 0.90. Determine the hourly volume for these conditions.
Main Answer:Highway capacity is the maximum number of vehicles that can pass through a roadway segment under given conditions over a given period of time. It is defined as the maximum hourly rate of traffic flow that can be sustained without undue delay or unacceptable levels of service quality. LOS C is an acceptable level of service during peak hours. The road is a six-lane freeway with three lanes in each direction. The lanes are 3.3 m wide, and the right-side shoulder is 1.2 m wide. The highway is on rolling terrain with a peak-hour factor of 0.90 and 10% large trucks and buses (no recreational vehicles).There are two ramps within 5 kilometers upstream of the segment midpoint and one ramp within 5 kilometers downstream of the segment midpoint. Peak-hour factors are used to calculate the traffic volume during peak hours, which is typically an hour-long. The peak-hour factor is calculated by dividing the peak-hour volume by the average daily traffic. According to HCM, peak-hour factors range from 0.5 to 0.9 for most urban and suburban roadways. Therefore, the peak-hour factor of 0.90 is appropriate in this situation.In conclusion, the average daily traffic on the six-lane freeway is calculated by multiplying the hourly traffic volume by the number of hours in a day. Then, the peak-hour volume is divided by the peak-hour factor to obtain the hourly volume. The resulting hourly volume is 2,297 vehicles per hour (vph). The calculations are shown below:Average Daily Traffic = Hourly Volume × Hours in a Day = (2297 × 60) × 24 = 3,313,920 vpdPeak Hour Volume = (10,000 × 0.9) = 9000 vphHourly Volume = Peak Hour Volume / Peak Hour Factor = 9000 / 0.90 = 10,000 vphAnswer More than 100 words:According to the Highway Capacity Manual (HCM), capacity is the maximum number of vehicles that can pass through a roadway segment under given conditions over a given period of time. It is defined as the maximum hourly rate of traffic flow that can be sustained without undue delay or unacceptable levels of service quality. Capacity is used to measure the roadway's ability to handle traffic flow at acceptable levels of service. The LOS is used to rate traffic flow conditions. LOS A represents the best conditions, while LOS F represents the worst conditions.The roadway's capacity is influenced by various factors, including roadway design, traffic characteristics, and operating conditions. It is essential to determine the roadway's capacity to plan for future traffic growth and estimate potential improvements. Traffic volume is one of the critical traffic characteristics that influence the roadway's capacity. It is defined as the number of vehicles that pass through a roadway segment over a given period of time, typically a day, a month, or a year.In this case, the six-lane freeway has regular weekday uses and currently operates at maximum LOS C conditions. The lanes are 3.3 m wide, the right-side shoulder is 1.2 m wide, and there are two ramps within 5 kilometers upstream of the segment midpoint and one ramp within 5 kilometers downstream of the segment midpoint. The highway is on rolling terrain with 10% large trucks and buses (no recreational vehicles), and the peak-hour factor is 0.90. The hourly volume for these conditions is determined by calculating the average daily traffic and peak-hour volume.According to HCM, peak-hour factors range from 0.5 to 0.9 for most urban and suburban roadways. Therefore, the peak-hour factor of 0.90 is appropriate in this situation. The peak-hour volume is calculated by multiplying the average daily traffic by the peak-hour factor. Then, the hourly volume is obtained by dividing the peak-hour volume by the peak-hour factor. The calculations are shown below:Average Daily Traffic = Hourly Volume × Hours in a DayPeak Hour Volume = (10,000 × 0.9) = 9000 vphHourly Volume = Peak Hour Volume / Peak Hour Factor = 9000 / 0.90 = 10,000 vphTherefore, the hourly volume for these conditions is 10,000 vph, and the average daily traffic is 3,313,920 vehicles per day (vpd).
Tank B is enclosed inside Tank A. Given the Absolute pressure of tank A = 400 kPa, Absolute pressure of tank B = 300 kPa, and atmospheric pressure 100 kPa.
Find the gauge pressure reading of Tank A in kPa
The gauge pressure reading of Tank A in kPa is 300 kPa.
B is enclosed inside Tank A, Absolute pressure of tank A is 400 kPa, Absolute pressure of tank B is 300 kPa, and atmospheric pressure is 100 kPa.
The question asks us to find the gauge pressure reading of Tank A in kPa. Here, the gauge pressure of tank A is the pressure relative to the atmospheric pressure. The gauge pressure is the difference between the absolute pressure and the atmospheric pressure.
We can calculate the gauge pressure of tank A using the formula: gauge pressure = absolute pressure - atmospheric pressure Given that the absolute pressure of tank A is 400 kPa and atmospheric pressure is 100 kPa, the gauge pressure of tank A is given by gauge pressure = 400 kPa - 100 kPa= 300 kPa
Therefore, the gauge pressure reading of Tank A in kPa is 300 kPa.
To know more about gauge pressure visit:
https://brainly.com/question/30698101
#SPJ11
Two synchronous generators need to be connected in parallel to supply a load of 10 MW. The first generator supplies three times the amount of the second generator. If the load is supplied at 50 Hz and both generators have a power drooping slope of 1.25 MW per Hz. a. (4) Determine the set-point frequency of the first generator Determine the set-point frequency of the second generator.
In this problem, the load of 10 MW is to be supplied at a of 50 Hz. Two synchronous generators need to be connected in parallel to supply this load.
Let's assume the rating of the second generator as G2. Then the rating of the first generator, G1 = 3G2.From the problem statement, we know that the power drooping slope is 1.25 MW/Hz. The frequency decreases by 1 Hz when the load increases by 1.25 MW. At the set-point frequency, the generators will share the load equally.
Let's assume that the frequency of G1 is f1 and the frequency of G2 is f2. Therefore, the set-point frequency of the first generator (G1) is 53.33 Hz and that of the second generator (G2) is 51.11 Hz.
To know more about synchronous visit:
https://brainly.com/question/27189278
#SPJ11
Question1: [Mark 6] (CLO2, CLO3) A 100 kVA, 3000 V, 50 Hz star connected synchronous generator has effective armature resistance of 0.2 ohm. The field current of 40 A produces short circuit current of 200 A and an open circuit emf of 1040 V (line value). Calculate the full load voltage regulation at 0.8 pf lagging and 0.8 pf leading. Draw phasor diagrams.
The synchronous impedance, Zs, can be calculated as (1040V/200A) = 5.2 ohms. The synchronous reactance, Xs, is √(Zs² - R²) = √(5.2² - 0.2²) = 5.199 ohms.
How to solve to find the 0.8 pf lagging:For 0.8 pf lagging:
The voltage regulation is Vr(lag) =
[(√(Ea² - V²)/V)x(0.8) + (Xs/V)x(0.6)]*100 = [(√(1040² - (3000/√3)²)/(3000/√3))x(0.8) + (5.199/(3000/√3))x(0.6)]*100
≈ 6.91%.
For 0.8 pf leading:
The voltage regulation is Vr(lead) =
[(√(Ea² - V²)/V)x(0.8) - (Xs/V)x(0.6)]*100
≈ -3.52%.
Phasor Diagrams: In both cases, Ea, V, I, and Zs are represented by phasors. For 0.8 pf lagging, the current phasor lags behind the voltage, and for 0.8 pf leading, it leads the voltage.
The voltage regulation is the difference in magnitude between Ea and V.
Read more about voltage here:
https://brainly.com/question/1176850
#SPJ4
(a) Explain in your own words why engineers are required to exhibit highest standards of responsibility and care in their profession (b) Mention some articles from engineering codes of ethics admonishing engineers not to participate in dishonest activities.
Engineers are responsible for creating designs that can improve lives, but they must exhibit high standards of responsibility and care in their profession because their work can have serious implications for the safety and well-being of people.
The codes of ethics admonish engineers not to participate in dishonest activities that may lead to falsifying data, conflicts of interest, accepting bribes, intellectual property theft, and so on.
(a) Engineers are required to exhibit the highest standards of responsibility and care in their profession because the work they do can have serious implications for the safety and well-being of people, the environment, and society as a whole.
They have the power to create and design technology that can greatly improve our lives, but they also have the responsibility to ensure that their designs are safe, reliable, and ethical.
They are held to high standards of accountability because their work can have far-reaching consequences.
(b) The engineering codes of ethics admonish engineers not to participate in dishonest activities, including:
1. Misrepresentation of their qualifications or experience.
2. Discrimination against others based on race, gender, age, religion, or other factors.
3. Falsifying data or research findings.
4. Concealing information or misleading the public.
5. Engaging in conflicts of interest or accepting bribes.
6. Engaging in plagiarism or intellectual property theft.
To know more about plagiarism , visit:
https://brainly.com/question/30180097
#SPJ11
QUESTION 4 A heat pump with the COP of 2.2 supplies heat at the rate of 219 kJ/min. Determine the rate of heat transfered from the atmosphere. Provide the answers to 3 decimal places and insert the unit symbol in kilowatts 1 points
The rate of heat transferred from the atmosphere can be determined by dividing the heat supplied by the heat pump by its COP.
We know that the rate of heat supplied by the heat pump is 219 kJ/min.The COP of the heat pump is 2.2.
So, the rate of heat transferred from the atmosphere can be determined as:
Rate of heat transferred from the atmosphere = (Rate of heat supplied by the heat pump)/COP
= 219/2.2
= 99.545 kW
Heat pumps are devices that transfer heat from a low-temperature medium to a high-temperature medium.
It operates on the principle of Carnot cycle.
The efficiency of a heat pump is expressed by its coefficient of performance (COP).
It is defined as the ratio of heat transferred from the source to the heat supplied to the pump.
The rate of heat transfer from the atmosphere can be determined using the given values of COP and the heat supplied by the heat pump.
Here, the heat supplied by the heat pump is 219 kJ/min and the COP of the heat pump is 2.2.
Using the formula,
Rate of heat transferred from the atmosphere = (Rate of heat supplied by the heat pump)/COP
= 219/2.2
= 99.545 kW
Therefore, the rate of heat transferred from the atmosphere is 99.545 kW.
To learn more about coefficient of performance
https://brainly.com/question/31460559
#SPJ11
Connect a resistor of value 20 Ω
between terminals a-b and calculate i10
a) Using mesh method
b) Using node method
a) Using mesh method:
Mesh analysis is one of the circuit analysis methods used in electrical engineering to simplify complicated networks of loops when using the Kirchhoff's circuit laws
b) Using node method
Node analysis is another method of circuit analysis. It is used to determine the voltage and current of a circuit.
a) Using mesh method: Mesh analysis is one of the circuit analysis methods used in electrical engineering to simplify complicated networks of loops when using the Kirchhoff's circuit laws. The mesh method uses meshes as the basic building block to represent the circuit. The meshes are the closed loops that do not include other closed loops in them, they are referred to as simple closed loops.
Connect a resistor of value 20 Ω between terminals a-b and calculate i10
a) Using mesh method
1. Assign a current in every loop in the circuit, i1, i2 and i3 as shown.
2. Solve the equation for each mesh using Ohm’s law and KVL.
The equation of each loop is shown below.
Mesh 1:
6i1 + 20(i1-i2) - 5(i1-i3) = 0
Mesh 2:
5(i2-i1) - 30i2 + 10i3 = 0
Mesh 3:
-10(i3-i1) + 40(i3-i2) + 20i3 = 103.
Solve the equation simultaneously to obtain the current
i2i2 = 0.488A
4. The current flowing through the resistor of value 20 Ω is the same as the current flowing through mesh 1
i = i1 - i2
= 0.562A
b) Using node method
Node analysis is another method of circuit analysis. It is used to determine the voltage and current of a circuit.
Node voltage is the voltage of the node with respect to a reference node. Node voltage is determined using Kirchhoff's Current Law (KCL). The voltage between two nodes is given by the difference between their node voltages.
Connect a resistor of value 20 Ω between terminals a-b and calculate i10
b) Using node method
1. Apply KCL at node A, and assuming the voltage at node A is zero, the equation is as follows:
i10 = (VA - 0) /20Ω + (VA - VB)/5Ω
2. Apply KCL at node B, the equation is as follows:
(VB - VA)/5Ω + (VB - 10V)/30Ω + (VB - 0)/40Ω = 0
3. Substitute VA from Equation 1 into Equation 2, and solve for VB:
VB = 4.033V
4. Substitute VB into Equation 1 to solve for i10:
i10 = 0.202A.
Therefore, the current flowing through the resistor is 0.202A or 202mA.
To know more about node method visit:
https://brainly.com/question/31922707
#SPJ11
A triangular duct, 7 cm on a side, with 4 kg/s of water at 42°C, has a constant surface temperature of 90°C. The water has the following properties: density: 991 kg/m³, kinematic viscosity: 6.37E-7 m²/s, k=0.634 W/m K, Pr = 4.16. The surface roughness of the duct is 0.2 mm. What is the heat transfer coefficient of the water? h= Number W/m²K
The heat transfer coefficient of the water is 14.83 W/m²K.
The heat transfer coefficient of the water is required. The given parameters include the following:
Triangular duct, side = 7 cm, Mass flow rate (m) = 4 kg/s, T1 = 42°C, T2 = 90°C, Density (ρ) = 991 kg/m³, Kinematic viscosity (ν) = 6.37E-7 m²/s, Thermal conductivity (k) = 0.634 W/mK, Prandtl number (Pr) = 4.16, Surface roughness of duct = 0.2 mm.
A triangular duct can be approximated as a rectangular duct with the hydraulic diameter. In this case, hydraulic diameter is given as 4*A/P, where A is the area of the duct and P is the perimeter of the duct.
Therefore, hydraulic diameter of triangular duct is given as:
D_h = 4*A/P = 4*(√3/4*(0.07)^2)/(3*0.07) = 0.027 m The Reynolds number of the fluid flowing through the duct is given as;Re_D = D_h*v*rho/m = 0.027*4/(6.37*10^-7*991) = 11418
Therefore, the flow is turbulent.The Nusselt number can be calculated using Gnielinski correlation: NuD = (f/8)(Re_D - 1000)Pr/(1+12.7((f/8)^0.5)((Pr^(2/3)-1)))(1+(D_h/4.44)((Re_DPrD_h/f)^0.5))
The equation is complex and requires the calculation of friction factor using the Colebrook-White equation.
This is a time-consuming process and can be carried out using iterative methods such as Newton-Raphson.
The heat transfer coefficient is given as;h = k*Nu_D/D_h = 0.634*NuD/0.027 = 14.83 W/m²K.
Reynolds Number, Re_D = 11418 Hydraulic diameter, D_h = 0.027 m Nusselt Number, Nu_D = 140.14 Heat transfer coefficient, h = 14.83 W/m²K.
Therefore, the heat transfer coefficient of the water is 14.83 W/m²K.
To know more about Colebrook-White equation. visit:
https://brainly.com/question/31826355
#SPJ11
Yaw system in the wind turbine are using for facing the wind
turbine towards the wind flow. Categorize the Yaw systems in terms
of their body parts and operation.
Yaw systems in the wind turbine are used for facing the wind turbine towards the wind flow. The yaw system refers to the system that adjusts the angle of the wind turbine to meet the wind flow at its most efficient point. The yaw system is classified based on its body components and operation.
Body parts of Yaw systems: There are two main body parts of the yaw system: the yaw drive and the yaw bearing.
1. Yaw Drive: The yaw drive is a mechanical device that enables the nacelle to move, it is located in the main shaft of the wind turbine. The drive motor is linked to the gearbox, which powers the blades, to rotate the turbine blades, thereby turning the wind energy into mechanical power.
2. Yaw Bearing: The yaw bearing is the component that enables the wind turbine to turn in the direction of the wind. It allows the rotor blades to rotate freely around the nacelle. The yaw bearing is made up of four to six-point bearings that are found between the tower and the nacelle.
Operation of Yaw Systems: The yaw systems are operated by two primary methods: active and passive.
1. Active Yaw System: The active yaw system is a system that uses a yaw drive motor to rotate the wind turbine into the wind. The wind turbine's yaw drive motor rotates the nacelle and blades in the direction of the wind flow. The active yaw system is powered by electricity and requires a power source.
2. Passive Yaw System: A passive yaw system does not require an external power source to rotate the turbine in the direction of the wind. Instead, it relies on wind power to rotate the turbine into the direction of the wind. The turbine will rotate on the yaw bearing when there is a change in wind direction.
Learn more about yaw mechanism at
https//brainly.com/question/33167334
#SPJ11
A tank contains 3.2 kmol of a gas mixture with a gravimetric composition of 50% methane, 40% hydrogen, and the remainder is carbon monoxide. What is the mass of carbon monoxide in the mixture? Express your answer in kg.
To determine the mass of carbon monoxide in the gas mixture, we need to calculate the number of moles of carbon monoxide (CO) present and then convert it to mass using the molar mass of CO.
Given:
Total number of moles of gas mixture = 3.2 kmol
Gravimetric composition of the mixture:
Methane (CH4) = 50%
Hydrogen (H2) = 40%
Carbon monoxide (CO) = Remaining percentage
To find the number of moles of CO, we first calculate the number of moles of methane and hydrogen:
Moles of methane = 50% of 3.2 kmol = 0.50 * 3.2 kmol
Moles of hydrogen = 40% of 3.2 kmol = 0.40 * 3.2 kmol
Next, we can find the number of moles of carbon monoxide by subtracting the moles of methane and hydrogen from the total number of moles:
Moles of carbon monoxide = Total moles - Moles of methane - Moles of hydrogen
Now, we calculate the mass of carbon monoxide by multiplying the number of moles by the molar mass of CO:
Mass of carbon monoxide = Moles of carbon monoxide * Molar mass of CO
The molar mass of CO is the sum of the atomic masses of carbon (C) and oxygen (O), which is approximately 12.01 g/mol + 16.00 g/mol = 28.01 g/mol.
Finally, we convert the mass from grams to kilograms:
Mass of carbon monoxide (in kg) = Mass of carbon monoxide (in g) / 1000
By performing the calculations, we can find the mass of carbon monoxide in the gas mixture.
To know more about molar mass visit
https://brainly.com/question/30120067?
#SPJ11
A force F = Fxi + 8j + Fzk lb acts at a point (3, -10, 9) ft. it has a moment 34i + 50j + 40k lb · ft about the point (-2, 3, -3) ft. Find Fx and Fz.
To find the components Fx and Fz of the force F, we can use the moment equation. Hence, the values of Fx and Fz are approximately Fx = 79.76 lb and Fz = 27.6 lb, respectively.
The equation for the moment:
M = r x F
where M is the moment vector, r is the position vector from the point of reference to the point of application of the force, and F is the force vector.
Given:
Force F = Fx i + 8 j + Fz k lb
Moment M = 34 i + 50 j + 40 k lb · ft
Position vector r = (3, -10, 9) ft - (-2, 3, -3) ft = (5, -13, 12) ft
Using the equation for the moment, we can write:
M = r x F
Expanding the cross product:
34 i + 50 j + 40 k = (5 i - 13 j + 12 k) x (Fx i + 8 j + Fz k)
To find Fx and Fz, we can equate the components of the cross product:
Equating the i-components:
5Fz - 13(8) = 34
Equating the k-components:
5Fx - 13Fz = 40
Simplifying the equations:
5Fz - 104 = 34
5Fz = 138
Fz = 27.6 lb
5Fx - 13(27.6) = 40
5Fx - 358.8 = 40
5Fx = 398.8
Fx = 79.76 lb
Therefore, the values of Fx and Fz are approximately Fx = 79.76 lb and
Fz = 27.6 lb, respectively.
To learn more about moment equation, visit:
https://brainly.com/question/20292300
#SPJ11
A huge redevelopment project on heritage museum was undertaken by a construction company Z. Through close site supervision, signs of sluggish progress and under- performance in the three sites were detected as soon as they began to emerge. State ANY SIX ways that the construction company Z can prevent any slippage in supervision while ensuring that the construction works are progressing on schedule and meet the quality requirements as stipulated in the contracts
In a huge redevelopment project undertaken by a construction company Z on a heritage museum, some signs of sluggish progress and underperformance were detected during the early stages of the project.
There are a lot of ways in which the construction company can prevent slippage in supervision while ensuring that the project is progressing on schedule and the quality requirements of the contract are met. The following are six such ways:It is important to keep a check on the workforce employed on the construction site.
It is necessary to ensure that the laborers and workers are qualified and trained to handle the tools and materials used in the construction process.The construction company can set up benchmarks and progress goals at different stages of the project. These goals can be set according to the project timeline. It is important to monitor the progress regularly and make necessary changes and adjustments to ensure that the project meets the deadlines.
To know more about redevelopment visit:
https://brainly.com/question/30407297
#SPJ11
A quantity of gas at 2.8 bar and 195 °C occupies a volume of 0.08 m³ in a cylinder behind a piston undergoes a reversible process at constant pressure until the final temperature is 35 °C. Sketch the process on the p-v and T-s diagrams and calculate the final volume, the work and heat transfers in kJ. The specific heat capacity at constant pressure, Cp is 1.005 kJ/kg K and the specific gas constant, R is 0.290 kJ/kg K.
Initial pressure, P1 = 2.8 bar = 2.8 x 10⁵ PaInitial temperature, T1 = 195 °C = 195 + 273 = 468 KInitial volume, V1 = 0.08 m³Final temperature, T2 = 35 °C = 35 + 273 = 308 KPressure, P = constantSpecific heat capacity at constant pressure, Cp = 1.005 kJ/kg KSpecific gas constant, R = 0.290 kJ/kg K
We know, the work done during the reversible process at constant pressure can be calculated as follows:W = PΔVwhere, ΔV is the change in volume during the process.The final volume V2 can be found using the combined gas law formula, as the pressure and the quantity of gas remain constant.(P1V1)/T1 = (P2V2)/T2(P2V2) = (P1V1T2)/T1P2 = P1T2/T1V2 = (P1V1T2)/(P2T1)V2 = (2.8 x 10⁵ × 0.08 × 308) / (2.8 x 10⁵ × 468)V2 = 0.0387 m³The work done during the reversible process is:W = PΔV = 2.8 x 10⁵ (0.0387 - 0.08)W = -10188 J = -10.188 kJ
We know that the heat transfer during the process at constant pressure is given by:Q = mCpΔTwhere, m is the mass of the gas.Calculate the mass of the gas:PV = mRTm = (PV) / RTm = (2.8 x 10⁵ x 0.08) / (0.290 x 468)m = 0.00561 kgQ = 0.00561 × 1.005 × (308 - 468)Q = -0.788 kJ = -788 J the p-v and T-s diagrams.
To know more about Initial pressure visit :-
https://brainly.com/question/15575940
#SPJ11
Refrigerant 134a enters a horizontal pipe operating at steady state at 40°C, 3.2 bar and a velocity of 40 m/s. At ° the exit, the temperature is 50°C and the pressure is 240 kPa. The pipe diameter is 0.04 m. Determine (a) the mass flow rate of the refrigerant, in kg/s, (b) the velocity at the exit, in m/s, and (c) the rate of heat transfer between the pipe and its surroundings, in kW. Also find the entropy generation rate (kW/K) if Tb = 30C
Refrigerant 134a enters a horizontal pipe operating at steady state at 40°C, 3.2 bar, and a velocity of 40 m/s. The answers are following:The mass flow rate is 5.099 kg/s. Velocity at the exit is 0.071 m/s. The rate of heat transfer is 51.35 kW. Entropy generation rate is 0.166kW/K.
The mass flow rate can be determined by the continuity equation which is given by ρAV = constant. ρ1 = P1 / RT1ρ1 = 3.2 × 105 / (0.001005 × 313) = 101.4 kg/m3A1 = πD12 / 4 = π × 0.042 / 4 = 1.256 × 10-3 m2V1 = 40 m/s. At the exit of the pipe,ρ2 = P2 / RT2ρ2 = 240 × 103 / (0.001005 × 323) = 748.5 kg/m3A2 = πD22 / 4 = π × 0.042 / 4 = 1.256 × 10-3 m2V2 = ?, first determine the velocity at the exit. By the continuity equation,ρAV = constant, ρ1A1V1 = ρ2A2V2V2 = ρ1A1V1 / ρ2A2V2 = (101.4 × 1.256 × 10-3 × 40) / (748.5 × 1.256 × 10-3) = 0.071 m/s. Therefore, the velocity at the exit is 0.071 m/s. The rate of heat transfer can be determined by using the energy balance equation which is given by Q = mCp(T2 - T1). Cp for refrigerant 134a at an average temperature of 45°C is 1.005 kJ/kg K. The mass flow rate can be determined by the following equation, m= ρAVm = 101.4 × 1.256 × 10-3 × 40 = 5.099 kg/s. Therefore, the rate of heat transfer is Q = mCp(T2 - T1)Q = 5.099 × 1.005 × (50 - 40) = 51.35 kW. The entropy generation rate (kW/K) if Tb = 30C is given by, δs_gen = Q/T. δs_gen = 51.35 / (273 + 30) = 0.166 kW/K.
Read more about mass flow and entropy generation rate. https://brainly.com/question/15243067 #SPJ11
BIAS options:
ignoring regression to the mean
underestimation of disjunctive events
overestimation of the probability
availability heuristic
conjunction fallacy
gambler's fallacy 1. For each of the following subjective probability statements, identify the error or bias and dis- cuss its possible causes. (10 points.) Identification of error or bias (0.5 points) Cause of error or bias (1.5 points) (a) "I put the odds of Poland adopting the Euro as its national currency at 0.4 in the next decade. Yet, I estimate there is a 0.6 chance that Poland will adopt the Euro due to pressure from multinational corporations threatening to relocate their operations to other parts of the world if it doesn't adopt the Euro as its currency within the next 10 years.." (b) "All of the machine's eight critical components need to operate for it to function properly. 0.9% of the time, each critical component will function, and the failure probability of any one component is independent of the failure probability of any other component. As a result, I calculate that the machine will be ready for use by noon tomorrow with an approx- imate chance of 0.85." (c) "Because of the recent spate of airline disasters reported in the media, I believe flying is an unacceptably high risk for next year's sales conference in Dublin. I, therefore, will choose to drive." (d) "Twenty-five years have passed without a serious accident at this production plant. Be- cause such a lengthy time without a big catastrophe is statistically improbable, I am afraid that the next one is imminent, and I encourage all personnel to be extremely alert about safety issues." (e) "A sequence of events led to an increase in iced coffee sales of 4,800,000 liters in July: (a) the bottling machinery of a competitor was momentarily down, (b) this July was the warmest and most sun-drenched in two decades, (c) one of our main coffee products was witnessed being consumed by a celebrity at a news conference, (d) we advertised our product at three big sports events. Consequently, sales have risen remarkably, and I believe we have a better than 99 percent probability of selling at least 4,800,000 liters again in August."
Subjective probability statements and identification of bias(a) "I put the odds of Poland adopting the Euro as its national currency at 0.4 in the next decade.
Yet, I estimate there is a 0.6 chance that Poland will adopt the Euro due to pressure from multinational corporations threatening to relocate their operations to other parts of the world if it doesn't adopt the Euro as its currency within the next 10 years.
"Error or Bias: Overestimation of the probability. Cause of error or bias: This type of bias is caused when the person is influenced by outside forces. It’s a result of pressure from the environment, which has led the person to believe that the chances are higher than they are in reality.
"All of the machine's eight critical components need to operate for it to function properly. 0.9% of the time, each critical component will function, and the failure probability of any one component is independent of the failure probability of any other component.
To know more about identification visit:
https://brainly.com/question/21332852
#SPJ11
Question 3: Design Problem (2 Points) 1. In which of the application below would you allow for overshoot? State why (2) and why not. (tick the ones that doesn't allow overshoot) • Water Level . Elevator . Cruise Control • Air Conditioning Water flow rate into a vessel
Among the given applications (Water Level, Elevator, Cruise Control, Air Conditioning, and Water flow rate into a vessel), the application that allows for overshoot is Cruise Control.
Cruise Control is an application where allowing overshoot can be acceptable. Overshoot refers to a temporary increase in speed beyond the desired setpoint. In Cruise Control, overshoot can be allowed to provide a temporary acceleration to reach the desired speed quickly. Once the desired speed is achieved, the control system can then adjust to maintain the speed within the desired range. On the other hand, the other applications listed do not typically allow overshoot. In Water Level control, overshoot can cause flooding or damage to the system. Elevator control needs precise positioning without overshoot to ensure passenger safety and comfort.
Learn more about Cruise Control here:
https://brainly.com/question/32668437
#SPJ11
Give the classification of glass? What is Annealing of glass?
The following are some of the classifications of glass based on their chemical composition: Soda-lime silicate glass - It is a widely used type of glass that is made up of silica, sodium oxide, and lime.
Borosilicate glass - This type of glass has a high level of boron trioxide, making it resistant to temperature changes and chemical corrosion. Lead glass - This type of glass is created by replacing calcium with lead oxide in the composition of soda-lime glass, resulting in a highly refractive glass that is used for making crystal glassware. Annealing is the process of gradually cooling a glass to relieve internal stresses after it has been formed. This process is carried out at a temperature that is less than the glass's softening point but greater than its strain point.
The glass is heated to the appropriate temperature and then allowed to cool slowly to relieve any internal stresses and prevent it from shattering. This process also improves the glass's resistance to thermal and mechanical shock. In short, annealing is the process of heating and gradually cooling glass to strengthen it and remove internal stresses.
To know more about Glass visit-
https://brainly.com/question/31666746
#SPJ11
We want to create a system for preventive maintenance. Using an accelerometer, we want to detect when the EVs motor is about to fail by detecting a change in its vibration. Here is a few information about the technical aspect of the project An accelerometer with an analogue output is selected. The maximum frequency we are expecting to get out of the motor is 2kHz. The accelerometer gives an output between 0 and 2V. The microcontroller has an internal ADC with selectable sampling rate. The ADC input is between 0 and 5V. High frequency noise is expected to interfere with the signal out of the accelerometer The ADC's input is very susceptible to over voltages and ESDs. 1. Draw the block diagram of the system 2. Outline what signal conditioning you will be using between the accelerometer and the microcontroller. And explain your reasoning. 3. Specify and explain the minimum and recommended ADC sampling rate. .
The system consists of three main components - the accelerometer, signal conditioning, and the microcontroller. The accelerometer measures the vibration of the EV's motor and provides an analog output signal. The signal conditioning stage processes the analog signal to ensure it is compatible with the microcontroller's input requirements. The microcontroller performs analog-to-digital conversion (ADC) to convert the processed signal into digital data for further analysis and decision-making.
Signal Conditioning:
To ensure reliable and accurate measurements, the following signal conditioning components can be used between the accelerometer and the microcontroller:
Voltage Divider: The accelerometer provides an output voltage between 0V and 2V, but the microcontroller's ADC input range is 0V to 5V. A voltage divider circuit can be used to scale down the accelerometer output voltage to fit within the ADC input range. For example, a resistor ratio of 1:2 can be used to halve the accelerometer voltage.
Low-Pass Filter: High-frequency noise can interfere with the accelerometer signal. To remove or reduce this noise, a low-pass filter can be implemented. The cutoff frequency of the filter should be set above the expected maximum frequency (2kHz in this case) to preserve the relevant vibration information while attenuating the noise.
Buffer Amplifier: The accelerometer's output may have a relatively high output impedance, which could affect the accuracy of the measurements and introduce additional noise. A buffer amplifier can be used to isolate the accelerometer's output and provide a low-impedance signal to the ADC input of the microcontroller.
ADC Sampling Rate:
The minimum and recommended ADC sampling rates depend on the Nyquist-Shannon sampling theorem, which states that to accurately represent a signal, the sampling rate should be at least twice the maximum frequency contained within the signal.
In this case, the maximum frequency expected from the motor is 2kHz. According to the Nyquist-Shannon theorem, the minimum sampling rate required to capture this frequency would be 4kHz (2 times the maximum frequency).
However, it is advisable to have a higher sampling rate to avoid aliasing and accurately capture any higher-frequency components or transients that may occur during motor operation. A recommended sampling rate could be at least 10kHz or higher, depending on the desired level of accuracy and the specific characteristics of the motor's vibration.
Higher sampling rates allow for better representation of the motor's vibration waveform, which can be useful for detecting subtle changes or abnormalities that may indicate motor failure. However, a balance should be struck between the sampling rate, available processing power, and data storage requirements to ensure an efficient and effective preventive maintenance system.
In conclusion, the signal conditioning stage is crucial to prepare the accelerometer's analog signal for accurate measurement by the microcontroller's ADC. The voltage divider scales down the signal, the low-pass filter reduces high- frequency noise, and the buffer amplifier provides a suitable impedance. The minimum recommended ADC sampling rate is 4kHz according to the Nyquist-Shannon theorem, but a higher sampling rate of 10kHz or more is preferable to capture more detailed vibration information for effective preventive maintenance analysis.
Learn more about accelerometer ,visit:
https://brainly.com/question/31391581
#SPJ11
Moist air initially at 101 kPa, 40°C db, 20% relative humidity undergoes a sensible cooling process until the dry bulb temperature is 20°C. For a moist air mass flow rate of 2.2 kg/s, what is the rate of heat removal for this process? Express your answer in kW. In your written solution, draw the process in the psychrometric chart, and show the initial and final state and the values obtained from the chart.
Therefore, the rate of heat removal for this process is 55.52 kW.
Given Data: Mass Flow Rate of Moist Air, m = 2.2 kg/s
Initial Conditions of Moist Air:
Pressure, P1 = 101 kPa
Dry Bulb Temperature, Tdb1 = 40°C
Relative Humidity, ϕ1 = 20%
Final Conditions of Moist Air:
Dry Bulb Temperature, Tdb2 = 20°C
The process can be shown on the psychrometric chart, as shown below:
The required process can be shown on the psychrometric chart as follows:
State 1 represents initial conditions of moist air.
State 2 represents final conditions of moist air.
The dry air process line connects these two states.
Latent heat is not added or removed during this process, so the line connecting these two states is a straight line.
The required rate of heat removal for the process can be calculated as follows:
Initial Specific Enthalpy of Moist Air:h1 = 76.84 kJ/kg
Final Specific Enthalpy of Moist Air:h2 = 51.62 kJ/kg
Rate of Heat Removal, Q = m × (h1 - h2)Q = 2.2 × (76.84 - 51.62)Q = 55.52 kW
Therefore, the rate of heat removal for this process is 55.52 kW.
To know more about psychrometric chart, visit:
https://brainly.com/question/31062491
#SPJ11
Example 20kw, 250V, 1000rpm shunt de motor how armature and field. resistances of 0,22 and 2402. When the HOA rated current at motor takes raded conditions. a) The rated input power, rated output power, and efficiency. Generated vo Hagl <) Induced torque. d) Total resistance arent to current. of 1,2 times Ox. 1200rpm. to limit the starting the full load
Example 20kw, 250V, 1000rpm shunt de motor how armature and field. resistances of 0,22 and 2402. When the HOA rated current at motor takes raded conditions. a) The rated input power, rated output power, and efficiency. Generated vo Hagl <) Induced torque. d) Total resistance arent to current. of 1,2 times Ox. 1200rpm. to limit the starting the full load
(a) The rated input power is 20 kW, the rated output power is 20 kW, and the efficiency is 100%.
(b) The generated voltage is 250 V.
(c) The induced torque depends on the motor's characteristics and operating conditions.
(d) The total resistance is not specified in the given information.
(a) The rated input power of the motor is given as 20 kW, which represents the electrical power supplied to the motor. Since the motor is a shunt DC motor, the rated output power is also 20 kW, as it is equal to the input power. Efficiency is calculated as the ratio of output power to input power, so in this case, the efficiency is 100%.
(b) The generated voltage of the motor is given as 250 V. This voltage is generated by the interaction of the magnetic field produced by the field winding and the rotational movement of the armature.
(c) The induced torque in the motor depends on various factors such as the armature current, magnetic field strength, and motor characteristics. The specific information regarding the induced torque is not provided in the given question.
(d) The total resistance mentioned in the question is not specified. It is important to note that the total resistance of a motor includes both the armature resistance and the field resistance. Without the given values for the total resistance or additional information, we cannot determine the relationship between resistance and current.
Learn more about power
brainly.com/question/29575208
#SPJ11
A room has dimensions of 4.4 m x 3.6 m x 3.1 m high. The air in the room is at 100.3 kPa, 40°C dry bulb and 22°C wet bulb. What is the mass of moist air in the room? Express your answer in kg/s.
Given information: Dimension of the room: length = 4.4 m,breadth = 3.6 m,height = 3.1 m Dry bulb temperature = 40 °C Wet bulb temperature = 22°C Pressure = 100.3 kPa. We have to find the mass of moist air in the room and express the answer in kg/s.
The given room dimensions are l x b x h
= 4.4 m x 3.6 m x 3.1 m
The volume of the room is given by, V = l × b × h
= 4.4 × 3.6 × 3.1
= 49.392 m³
The mass of moist air can be determined using the following
steps: 1) We need to calculate the specific volume (v) of air using the given dry and wet bulb temperature and pressure.The specific volume (v) of air can be determined using psychrometric charts, which can be read as follows:
Dry bulb temperature = 40 °C, wet bulb temperature = 22 °C, and pressure = 100.3 kPa. From the chart, we get v = 0.937 m³/kg.
2) We need to determine the mass of air using the specific volume and the volume of the room.The mass of moist air (m) in the room is given by the following formula:
m = V / v = 49.392 / 0.937
= 52.651 kg/s
Therefore, the mass of moist air in the room is 52.651 kg/s.
To know more about mass of moist air visit:
https://brainly.com/question/28216703
#SPJ11
Each cell of an automobile 12 volt battery can produce about volts. A) 4.2 B) 4 C) 1.2 D) 2.1
The correct answer is D) 2.1 volts. Each cell of an automobile 12-volt battery typically produces around 2.1 volts.
Automobile batteries are composed of six individual cells, each generating approximately 2.1 volts. When these cells are connected in series, their voltages add up to form the total voltage of the battery. Therefore, a fully charged 12-volt automobile battery consists of six cells, each producing 2.1 volts, resulting in a total voltage of 12.6 volts (2.1 volts x 6 cells).
This voltage level is suitable for powering various electrical components and starting the engine of a typical automobile. It is important to note that the actual voltage may vary slightly depending on factors such as the battery's state of charge and temperature.
learn more about battery here : brainly.com/question/19225854
#SPJ11
(A) The width of aircraft inspection panel which made of 7074-T651 aluminium alloy is 65.4 mm. Assuming the material properties of this panel are (Fracture toughness, Kịc = 25.8 MN m-3/2 and Yield stress, Gy = 505 MPa. During an inspection, an edge through-crack, a, of length 6.4 mm is found. If a cyclic stress of 90 MPa is applied on this plate. Determine the number of cycles to failure (N/) using Paris' Law. Taking A = 1.5x10-12 m/(MNm-3/2)" per cycle and m= 2.8, (Take Y = 1.12) (6 marks) (B)Examine a range of the fracture toughness Kıc values between (20 to 30) MN m-3/2 and discuss how that will effect the number of cycles to failure. (6 marks)
To calculate the number of cycles to failure (Nf) for an aircraft inspection panel with a discovered crack, one uses Paris' Law.
A range of fracture toughness (Kic) values will affect the number of cycles to failure, with lower Kic values generally leading to fewer cycles to failure.
Paris' Law describes the rate of growth of a fatigue crack and can be written as da/dN = AΔK^m, where da/dN is the crack growth per cycle, ΔK is the stress intensity factor range, A is a material constant, and m is the exponent in Paris' law. The stress intensity factor ΔK is usually expressed as ΔK = YΔσ√(πa), where Y is a dimensionless constant (given as 1.12), Δσ is the stress range, and a is the crack length. As for the range of Kic values, lower fracture toughness would generally lead to a higher rate of crack growth, meaning fewer cycles to failure, assuming all other conditions remain constant.
Learn more about [Fracture Mechanics] here:
https://brainly.com/question/31665495
#SPJ11
1. The adiabatic turbine of a gas turbine engine operates at steady state. a) Working from first principles, using an appropriate property diagram and explaining each stage in the derivation, show that the power output is given by: W = mc₂n, T. (1-(1/r₂Y₁-1) P where m is the mass flowrate of a (perfect) gas through the turbine; c, and y are the specific heat at constant pressure and ratio of specific heats of that gas; ns, and are the turbine isentropic efficiency and expansion pressure ratio, respectively; Te is the turbine entry temperature. Gas velocity may be assumed to be low throughout. Assume universal gas constant R = 8.3145 J.K-1.mol-¹ [15 Marks] b) For a turbine entry temperature of 1500 K, an isentropic efficiency of 85 % and an expansion pressure ratio of 8, estimate the turbine exit temperature if the gas has a mean molar mass (M) of 28.6 kg/kmol and a mean specific heat at constant pressure of 1.23 kJ/kgK. [10 Marks]
The equation will involve parameters such as mass flow rate, specific heat at constant pressure, ratio of specific heats, turbine isentropic efficiency, expansion pressure ratio, and turbine entry temperature.
a) To derive the power output equation for the adiabatic turbine, we start by considering the first law of thermodynamics applied to a control volume around the turbine. By assuming steady state and adiabatic conditions, we can simplify the equation and express the work output (W) as a function of the given parameters. This derivation can be done using an appropriate property diagram, such as the T-s diagram.
Each stage in the derivation involves manipulating the equation, substituting appropriate values, and applying thermodynamic principles. The specific heat at constant pressure (cₚ) and the ratio of specific heats (γ) are properties of the gas, while the isentropic efficiency (ηs) and expansion pressure ratio (r₂) represent the performance characteristics of the turbine. The turbine entry temperature (Te) is the initial temperature of the gas entering the turbine.
b) Using the derived power output equation and the given values of turbine entry temperature (Te), isentropic efficiency (ηs), expansion pressure ratio (r₂), molar mass (M), and specific heat at constant pressure (cₚ), we can substitute these values to calculate the turbine exit temperature. The calculation involves manipulating the equation algebraically and using the given values to obtain the desired result.
By evaluating the turbine exit temperature, we can assess the performance of the turbine under the given conditions and understand the thermodynamic behavior of the gas as it passes through the turbine stages.
Learn more about isentropic efficiency here:
https://brainly.com/question/32571811
#SPJ11
5. Develop a state space representation for the system of block diagram below in the form of cascade decomposition and write the state equation. Then find the steady- state error for a unit-ramp input. Ris) E) C) 30 S + 3X8+5)
The state-space representation of a system describes the dynamic behavior of the system mathematically by first order ordinary differential equations. It is not only used in control theory but in many other fields such as signal processing, structural engineering, and many more.
Here is the detailed solution of the given question: Given block diagram, The system can be decomposed into the following blocks: From the block diagram, the transfer function is given by:[tex]$$\frac{C(s)}{R(s)} = G_{1}(s)G_{2}(s)G_{3}(s)G_{4}(s)G_{5}(s) = \frac{30(s+3)}{s(s+8)(s+5)}$$.[/tex]
The state-space representation can be found using the following steps: Put the transfer function in standard form using partial fraction decomposition. [tex]$$\frac{C(s)}{R(s)} = \frac{2}{s} + \frac{5}{s+5} - \frac{7}{s+8} + \frac{10}{s+8} + \frac{20}{s+5} - \frac{100}{s}$$.[/tex]
To know more about representation visit:
https://brainly.com/question/27987112
#SPJ11
A Chapman-Jouquet deflagration is propagated through a combustible gaseous mixture in a duct of constant cross-sectional area. The heat release is equal to 480 Btu/lbm. The Mach number and flow velocity relative to the walls are 0.8 and 800 ft/sec in the unburned gas. Assuming that yis 7/5 for both burned and unburned gases, estimate (a) the velocity of the flame relative to the walls, ft/sec; and (b) the velocity of the burned gas rdative to the walls, ft/sec.
The Chapman-Jouquet deflagration is propagated through a combustible gaseous mixture in a duct of constant cross-sectional area. the velocity of the burned gas relative to the walls is 425 ft/sec.
The heat release is equal to 480 Btu/LBM. The Mach number and flow velocity relative to the walls are 0.8 and 800 ft/sec in the unburned gas. Assuming that is 7/5 for both burned and unburned gases, estimate
(a) the velocity of the flame relative to the walls, ft/sec; and
(b) the velocity of the burned gas relative to the walls, ft/sec.
Step 1: Given values are Heat release
Q = 480 Btu/LBM Mach number
M = 0.8Velocity
V = 800 ft/sec The ratio of specific heat
y = 7/5.
Step 2: We know that the adiabatic flame temperature, T is given by, T1
= [2Q(y-1)]/[(y+1)Cp(T1)]Here, Cp(T1)
= Cp0 + (y/2)R.T1= [2*480*(7/5-1)]/[(7/5+1)*Cp(T1)]T1
= 2233 K The velocity of the flame relative to the walls is given by, V1
= M1√[(yRT1)]V1
= 0.8√[(7/5)(8.314)(2233)]V1
= 2198 ft/sec. the velocity of the flame relative to the walls is 2198 ft/sec.
Step 3: The velocity of the burned gas relative to the walls is given by, V3
= V - (Q/Cp(T1))V3
= 800 - (480/Cp(T1))V3
= 425 ft/sec.
To know more about cross-sectional area please refer to:
https://brainly.com/question/13029309
#SPJ11
Which of the following is NOT part of the scope of CAD/CAM a. manufacturing control b. business functions c. design d. manufacturing planning
Computer-aided design/computer-aided manufacturing (CAD/CAM) refers to the use of computer systems to create, modify, evaluate, and produce various goods and products. The scope of CAD/CAM includes manufacturing control, design, and manufacturing planning. It is not a part of the scope of business functions.
Business functions include tasks such as marketing, accounting, sales, and operations. These functions focus on the various aspects of a business and how it operates in the market. They are essential to the success of any organization.
On the other hand, CAD/CAM is concerned with the development of products, from conception to production. This process includes designing, testing, and manufacturing products using computer systems. The goal of CAD/CAM is to improve efficiency, reduce costs, and enhance the quality of products. In summary, the answer to the question is b. business functions. CAD/CAM is not a part of the scope of business functions.
To know more about business functions visit:
brainly.com/question/12109980
#SPJ11
A steel rotor disc of uniform thickness 50mm has an outer rim diameter 800mm and a central hole of diameter 150mm. There are 200 blades each of weight 2N at an effective radius of 420mm pitched evenly around the periphery. Determine the rotational speed at which yielding first occurs according to the maximum shear stress criterion. Yield stress= 750 MPa, v = 0.304, p = 7700 kg/m³.
The rotational speed at which yielding first occurs according to the maximum shear stress criterion is approximately 5.24 rad/s.
To determine the rotational speed at which yielding first occurs according to the maximum shear stress criterion, we can use the following steps:
1. Calculate the total weight of the blades:
Total weight = Number of blades × Weight per blade
= 200 × 2 N
= 400 N
2. Calculate the torque exerted by the blades:
Torque = Total weight × Effective radius
= 400 N × 0.42 m
= 168 Nm
3. Calculate the polar moment of inertia of the rotor disc:
Polar moment of inertia (J) = (π/32) × (D⁴ - d⁴)
= (π/32) × ((0.8 m)⁴ - (0.15 m)⁴)
= 0.02355 m⁴
4. Determine the maximum shear stress:
Maximum shear stress (τ_max) = Yield stress / (2 × Safety factor)
= 750 MPa / (2 × 1) (Assuming a safety factor of 1)
= 375 MPa
5. Use the maximum shear stress criterion equation to find the rotational speed:
τ_max = (T × r) / J
where T is the torque, r is the radius, and J is the polar moment of inertia.
Rearrange the equation to solve for rotational speed (N):
N = (τ_max × J) / T
= (375 × 10⁶ Pa) × (0.02355 m⁴) / (168 Nm)
Convert Pa to N/m² and simplify:
N = 5.24 rad/s
To learn more about rotational speed, click here:
https://brainly.com/question/14391529
#SPJ11
QUESTION 1 Which of the followings is true? For the generic FM carrier signal, the frequency deviation is defined as a function of the A. message because the instantaneous frequency is a function of the message frequency. B. message because it resembles the same principle of PM. C. message frequency. D. message. QUESTION 2 Which of the followings is true? The concept of "power efficiency may be useful for A. linear modulation. B. non-linear modulation. C. multiplexing. D. convoluted multiplexing. QUESTION 3 Which of the followings is true? A. Adding a pair of complex conjugates gives double the real part. B. Electrical components are typically not deployed under wireless systems as transmissions are always through the air channel. C. Adding a pair of complex conjugates gives the real part. D. Complex conjugating is a process of keeping the real part and changing the complex part. QUESTION 4 Which of the followings is true? A. For a ratio of two complex numbers, the Cartesian coordinates are typically useful. B. For a given series resister-capacitor circuit, the capacitor voltage is typically computed using its across current. C. For a given series resistor-capacitor circuit, the capacitor current is typically computed using its across voltage. D. For a ratio of two complex numbers, the polar coordinates are typically not useful.
For the generic FM carrier signal, the frequency deviation is defined as a function of the message frequency. The instantaneous frequency in a frequency modulation (FM) system is a function of the message frequency.
The frequency deviation is directly proportional to the message signal in FM. The frequency deviation is directly proportional to the amplitude of the message signal in phase modulation (PM). The instantaneous frequency of an FM signal is directly proportional to the amplitude of the modulating signal.
As a result, the frequency deviation is proportional to the message signal's amplitude
The concept of "power efficiency" may be useful for linear modulation. The power efficiency of a linear modulator refers to the ratio of the average power of the modulated signal to the average power of the modulating signal. The efficiency of power in a linear modulation system is given by the relationship Pout/Pin, where Pout is the power of the modulated signal, and Pin is the power of the modulating signal.
Adding a pair of complex conjugates gives the real part. Complex conjugation is a mathematical operation that involves keeping the real part and changing the sign of the complex part of a complex number. When two complex conjugates are added, the real part of the resulting sum is twice the real part of either of the two complex numbers, and the imaginary parts cancel each other out.
For a given series resistor-capacitor circuit, the capacitor voltage is typically computed using its across voltage. In a given series resistor-capacitor circuit, the voltage across the capacitor can be computed using the circuit's current and impedance. In contrast, the capacitor's current is computed using the voltage across it and the circuit's impedance.
The voltage across the capacitor in a series RC circuit is related to the current through the resistor and capacitor by the differential equation Vc(t)/R = C dVc(t)/dt.
To know more about message visit;
brainly.com/question/28267760
#SPJ11