Answer:
The acceleration at the moment the train speed reaches 52 kilometers per hour is approximately 1.826 meters per square second.
Explanation:
According to Rotational Physics, the total acceleration of the train rounding the horizontal turn is a combination of tangential ([tex]a_{t}[/tex]) and radial accelerations ([tex]a_{r}[/tex]), measured in meters per square second. The former one represents the change in the magnitude of the velocity, whereas the latter one represents the change in its direction. By definition of magnitude and Pythagorean Theorem we get that magnitude of total acceleration ([tex]a[/tex]), measured in meters per square second, is:
[tex]a = \sqrt{a_{r}^{2}+a_{t}^{2}}[/tex] (Eq. 1)
Magnitudes of tangential and radial accelerations are determined by using the following formulas:
[tex]a_{t} = \frac{v_{f}-v_{o}}{t}[/tex] (Eq. 1)
[tex]a_{r} = \frac{v_{f}^{2}}{R}[/tex] (Eq. 2)
Where:
[tex]v_{o}[/tex], [tex]v_{f}[/tex] - Initial and final speeds, measured in meters per second.
[tex]t[/tex] - Time, measured in seconds.
[tex]R[/tex] - Radius, measured in meters.
If we know that [tex]v_{o} = 24.444\,\frac{m}{s}[/tex], [tex]v_{f} = 14.444\,\frac{m}{s}[/tex], [tex]t = 18\,s[/tex] and [tex]R = 120\,m[/tex], then the magnitude of the total acceleration when the train speed reaches 52 kilometers per hour is:
[tex]a_{t} = \frac{14.444\,\frac{m}{s}-24.444\,\frac{m}{s} }{18\,s}[/tex]
[tex]a_{t} = -0.556\,\frac{m}{s^{2}}[/tex]
[tex]a_{r} = \frac{\left(14.444\,\frac{m}{s} \right)^{2}}{120\,m}[/tex]
[tex]a_{r} = 1.739\,\frac{m}{s^{2}}[/tex]
[tex]a = \sqrt{\left(-0.556\,\frac{m}{s^{2}} \right)^{2}+\left(1.739\,\frac{m}{s^{2}} \right)^{2}}[/tex]
[tex]a \approx 1.826\,\frac{m}{s^{2}}[/tex]
The acceleration at the moment the train speed reaches 52 kilometers per hour is approximately 1.826 meters per square second.
A large bottle contains number medical tablets each having a mass of 250
mg.The mass of all tablets is 1kg.Calculate the number of tablets in the
bottle.
First of all, this isn't physics. But, here's the answer:
1 gram is a 1000 milligram and 250 milligram is 250 * 0.001 g which is 0.25 gram.
Since 1 kg is 1000 g, we divide 1000 by 0.25 and we get 1000 * 4 which is 4000.
There are [tex]4000[/tex] tablets inside the bottle.
Forces that are equal in size but opposite in direction are called what ?
Answer:
I think they are called balanced forces
Explanation:
A 2.0 cm thick brass plate (k_r = 105 W/K-m) is sealed to a glass sheet (kg = 0.80 W/K m), and both have the same area. The exposed face of the brass plate is at 80°C, while the exposed face of the glass is at 20 °C. How thick is the glass if the glass brass interface is at 65 C? Ans. 0.46 mm
Claudia stubs her toe on the coffee table with a force of 100.ON. A) What is the
acceleration of Claudia's 1.80kg foot? B) What is the acceleration of the table if it has a mass
of 20.0kg? (ignore any frictional effects) C) Why would Claudia's toe hurt less if the table had
less mass?
Answer:
A.) acceleration= 55.6m/s^2
B.) acceleration of table= 5.0m/s^2
C.) More acceleration
Explanation:
A.) 100N/1.8kg= -55.6
B.) 100N÷20kg= 5
C.) Because since the table would have less mass, it would have had to accelerate more
Once a player catches the Frisbee they are only allowed to pivot like in
basketball.
True
False
The most commonly accepted theory of muscle growth states that ______________ ________ within a muscle activate a(n) ________________ response process that causes dormant cells to build and regenerate muscle tissue.
A. contractions; inhibitory
B. tension; neurological
C. microscopic tears; inflammatory
D. stress; cytokines
Answer:
C
Explanation:
The most commonly accepted theory of muscle growth states that microscopic tears within a muscle activate an inflammatory response process that causes dormant cells to build and regenerate muscle tissue; this is option c.
What is the significance of the microscopic tears in muscle?It has negative consequences on the muscle, and it is also known as "microtrauma," which occurs as a result of muscle contraction and is a normal part of the muscle repair and growth process. Here, the fibers in the muscle are damaged, and in response, the body initiates a repair process. This leads to muscle growth and increased strength and is helpful for muscle repair.
Hence, the most commonly accepted theory of muscle growth states that microscopic tears within a muscle activate an inflammatory response process that causes dormant cells to build and regenerate muscle tissue; this is option c.
Learn more about the microscopic tears in muscle here.
https://brainly.com/question/29457664
#SPJ2
which statement is true of the particles that make up a substance? a. particles in a liquid have more energy than particles in a gas. b. particles in a liquid and particles in a solid have the same amount of energy. c. particles in a gas have more energy than particles in liquid. d. particles in a solid have moe energy than particles in a gas.
Explanation:
so sorry
don't know but please mark me as brainliest please
Can someone help plzzzzzzz I need it ASAP thank you
Answer:
Explanation:
Frequency is oscillations per second.
So we have to find the Number of seconds she paced.
2 minutes = 2 X 60
= 120 seconds
Therefore,
Her frequency = 10 / 120
= 1/12 Hertz
What unit is used to measure energy when calculating specific heat capacity? Give the abbreviation, not the full name.
The unit that should be used to measure energy when calculating specific heat capacity is Energy is in Joules ( J ).
What unit is used to measure energy?The specific heat capacity should be determined in joules per kilogram degree-celsius ( J k g − 1 ∘ C − 1 ).
It is to be supplied for the substance with respect to mass and it increased the temperature.
Hence, The unit that should be used to measure energy when calculating specific heat capacity is Energy is in Joules ( J ).
Learn more about unit here: https://brainly.com/question/16660726
The unit used to measure energy when calculating specific heat capacity is the joule (J).
The joule (J), a unit used to quantify energy, is used to calculate specific heat capacity. In the International System of Units (SI), the joule serves as the default unit of energy.
It is described as the quantity of energy that is delivered when one newton of force is exerted across a one-meter distance.
Thus, the quantity of heat energy needed to increase the temperature of a particular substance by a specific amount is measured as specific heat capacity. J/kg°C, or joules per kilogramme per degree Celsius, is the unit of measurement.
For more details regarding specific heat, visit:
https://brainly.com/question/31608647
#SPJ6
5) A forklift raises a box 1.2 m doing 7,000 J of work on it. What is the mass of the box?
Answer:
The answer is 5833.3 kgExplanation:
To find the mass of the box we use the formula
[tex]m = \frac{w}{d} \\ [/tex]
w is the workdone
d is the distance
From the question we have
[tex]m = \frac{7000}{1.2} \\ = 5833.3333...[/tex]
We have the final answer as
5833.3 kgHope this helps you
"She finished the sprint with the speed of a cheetah." This statement represents which of the
following functions of language? (2 points)
correct answer is poetic.
Answer:
Poetic
Explanation:
I took the test
Answer:
Poetic
Explanation:
I got it right on the test
an object traveling at 15m/s if it has a mass of 2.8kg find the momentum
Answer:
42
Explanation:
p=mv
momentum=mass*velocity
x=2.8*15
x=42
which one is correct:
Average acceleration of an object is the:
Change in its position divided by the change in time
Change in time divided by the change in its position
Change in its velocity divided by the change in time
Change in time divided by the change in its velocity
Answer:
Option (c) is correct.
Explanation:
Acceleration of an object is given by the formula as follows :
[tex]a=\dfrac{v-u}{t}[/tex]
Where
u and v are initial and final velocity
t is time
(v-u) is also called the change in velocity
So, the acceleration of an object is equal to the rate of change of velocity. Hence, the correct option is (c) " Change in its velocity divided by the change in time".
Doing specific exercises to improve a particular area of fitness is called flexibility? True or false
Answer:
True.
Explanation:
Exercises and yoga are important for the individual's health. The exercise makes the individual, fit, healthy and also reduces the chances of the deadly disease in human beings.
Different types of exercise can be performed by the individual. The aerobic exercises increase the amount of oxygen in the body. With the aerobic exercise, the exercise that can increase the strength, flexibility and total fitness must also be included.
If you measured the final velocity of the car to be 1 m/s and the initial mass of the car remains the same, how much coal was added to the car in kg
Complete Question
The complete question is shown on the first uploaded image
Answer:
a
[tex]p = 14033.7 \ kg\cdot m/s[/tex]
b
[tex]v = 1.22 \ m/s[/tex]
c
[tex]m_2 = 9506.7 \ kg[/tex]
Explanation:
From the question we are told that
The mass of the coal car is [tex]m_1 = 4527 \ kg[/tex]
The velocity is [tex]v_i = 3.1 \ m/s[/tex]
The load of coal dropped is [tex]m_2 = 6952 \ kg[/tex]
Generally the momentum of the system before the coal is added is mathematically represented as
[tex]p = m_j * v_i[/tex]
=> [tex]p = 4527 * 3.1[/tex]
=> [tex]p = 14033.7 \ kg\cdot m/s[/tex]
Generally from the law of momentum conservation is mathematically represented as
[tex]m_1 * v_i + m_2 * v_2 = (m_1 + m_2 )v[/tex]
Here [tex]v_2[/tex] is the velocity of the load before it is dropped and the value is 0 m/s
So
=> [tex]v =\frac{m_1 * v_i }{m_1 + m_2}[/tex]
[tex]v = \frac{4527 * 3.1 }{( 4527 + 6952 )}[/tex]
=> [tex]v = 1.22 \ m/s[/tex]
When v = 1m/s and [tex]m_1[/tex] remain the same
Then
=> [tex]1 =\frac{4527 * 3.1 }{4527 + m_2}[/tex]
=> [tex]4527 + m_2 = 14033.7[/tex]
=> [tex]m_2 = 9506.7 \ kg[/tex]
Detlev walks 1000 meters north to the store and walks back 900 meters south to his friends house. The friends house is 100 meters to the north of Detlev’s house. What was Detlev’s Travel Distance?
A change of temperature of 20 C is equivalent to a change in thermodynamic temperature of
Answer:
20 K
Explanation:
It is given that,
The change in temperature is 20 C.
We need to find the change in thermodynamic temperature.
If teperauture T₁ = 0° C = 0+273 = 273 K
T₂ = 20° C = 20 + 273 = 293 K
The change in temperature,
[tex]\Delta T=T_2-T_1\\\\=293-273\\\\=20\ K[/tex]
So, the change in temperature of 20°C is equivalent to 20 K.
The change in thermodynamic temperature is equal to 20 Kelvin.
Given the following data:
Change in temperature = 20°CTo determine the change in thermodynamic temperature:
A thermodynamic temperature can be defined as an absolute measure of the average total internal energy possessed by a body or an object. Thus, thermodynamic temperature is typically measured in Kelvin (K).
Mathematically, the change in temperature of an object is given by the formula:
[tex]\theta = T_f - T_i[/tex]
Where:
[tex]T_i[/tex] is the initial temperature (0°C)[tex]T_f[/tex] is the final temperature (20°C).Next, we would convert the values in degree Celsius to Kelvin:
Conversion:
0°C = 273 K
20°C = 273 + 20 = 293 K
For the change in thermodynamic temperature:
[tex]\theta = 293 - 273\\\\\theta =20\;K[/tex]
Read more: https://brainly.com/question/22069910
The CERN particle accelerator is circular with a circumference of 7.0 km.
Required:
a. What is the acceleration of the protons (m=1.67×10^−27kg) that move around the accelerator at of the speed of light? (The speed of light is v=3.00×10^8m/s.)
b. What is the force on the protons?
Answer:
Explanation:
a) centripetal acceleration is the acceleration of a body in a circular path. It is expressed as;
a = mv²/r
m is the mass of proton = 1.67×10^−27kg
v is the velocity = 3.00×10^8m/s
r is the radius
Since C = 2πr
7000m = 2πr
r = 7000/2π
r = 1114.08m
Substitute
a = 1.67×10^−27 (3.00×10^8)²/1114.08
a = 1.67×10^−27 * 9×10^16/1114.08
a = 15.03*10^-11/1114.08
a = 0.001346*10^-11
a = 1.346*10^-14m/s²
b) Force on the proton = mass * acceleration
Force = 1.67×10^−27kg * 1.346*10^-14
Force = 2.246*10^-41N
hence the force on the proton is 2.246*10^-41N
4.
Vectors P and Q are drawn to scale.
P
Which diagram represents the vector (P +Q)?
A
B
с
D
plz help I will fail.
can anyone plz help me.
plz
Answer:
hindi ko gets
Explanation:
ang gulo naman nyan
A physicist's left eye is myopic (i.e., nearsighted). This eye can see clearly only out to a distance of 35 cm.Find the focal length and the power of a lens that will correct this myopia when worn 2.0 cm in front of the eye.
Answer:
Explanation:
To get the focal length, we will use the lens formula;
1/f = 1/u + 1/v
f is the focal length
u is the object distance
v is the image distance
Given
since the physicist's left eye is myopic, it will be corrected using concave lens and the image distance is negative.
u = 35cm
v = -2.0
1/f = 1/35-1/2
1/f = 2-35/70
1/f = -33/70
f = -70/33
f = -2.12 cm
f = -0.0212m
Power of a lend is the reciprocal of its focal length
Power of the lens = 1/f
P = 1/-0.0212
P = -47.17dioptres
The power of the lens is -47.17D
Find the density of a liquid, in lb/ft^3, that exerts a pressure of 0.400 lb/in^2 at a depth of 42.0 in.
Given :
Pressure, P = 0.4 lb/in².
Depth, h = 42 in.
To Find :
The density of a liquid.
Solution :
Pressure at height h of a liquid of density [tex]\rho[/tex] is given by :
[tex]P = \rho g h[/tex] ....1)
Here, g = 386.04 in/s²( acceleration due to gravity )
Putting all values in equation 1, we get :
[tex]P = \rho g h\\\\0.4 = \rho\times 386.04 \times 42\\\\\rho=\dfrac{0.4}{42\times 386.04}\ lb/in^3\\\\\rho=\dfrac{0.4}{42\times 386.04}\times 12^3\ lb/ft^3\\\\\rho=0.0426\ lb/ft^3[/tex]
Hence, this is the required solution.
An archer shoots an arrow. Consider the action force to be the bowstring against the arrow. The reaction to this force is the:_____________
a. friction of the ground against the archer's feet.
b. grip of thhe archer's hand on the bow.
c. arrow's push against the bowstring.
d. combined weight of the arrow and bowstring
e. air resistance against the bow arrow.
Answer:
c. arrow's push against the bowstring.
Explanation:
Newtons third law of motion describe the relationship between action and reaction forces. Thus when the action force is applied by the bowstring against the arrow, a reaction to this force is supplied by the arrow's push against the bowstring.
If these two forces are not equal and opposite, the arrow would not move as expected. The elastic property of the bowstring propels the arrow at a rate which is due to the potential energy it has gained due to the stretching force.
Select all that apply. The spectrum of Star Y is compared to a reference hydrogen spectrum. What can be concluded about Star Y? Reference (normal) Hydrogen Spectrum Star Y I 500 550 600 650 700 750 400 450 9200 OdyssepWare, Ing. Star Y is showing radial motion Star Y is moving away from the Earth Star Y is moving toward the Earth Star Y is showing transverse motion
Answer:
Star Y is showing radial motion
Star Y is moving toward the Earth
Explanation:
Just answered this question on a quiz and got it right.
Star Y is showing radial motion
Star Y is moving towards earth.
What is a spectrum ?Spectrum is defined as the arrangement of radiations emitted by atoms or molecules based on their characteristic wavelength and frequency.
Here,
The spectrum of the star Y is given and is compared to a reference hydrogen spectrum. The range of wavelengths of the star is given. The spectrum of the star shows that the wavelengths are shifted such that from longer wavelengths to shorter wavelength. This phenomenon of shift in wavelengths from higher to lower is known as blue shift. The star shows blue shift that means shifted to shorter wavelength or it can be said as shifted from lower frequency to higher frequency. As a result, it can be concluded that the star Y is moving towards the earth which implies Star Y is showing radial motion.
Hence,
The star Y is showing radial motion.
Star Y is moving towards the earth.
To learn more about spectrum, click:
https://brainly.com/question/6562844
#SPJ7
what is the state of y when y = k/x, x is halved.
Answer:
y becomes doubled.
Explanation:
If;
y = [tex]\frac{k}{x}[/tex]
what is the state of y when x is halved;
the given expression is an inverse relationship. When y increases, x is supposed to decrease and vice versa.
if x is halved; x = [tex]\frac{x}{2}[/tex]
[tex]\frac{k}{\frac{x}{2} }[/tex] = [tex]\frac{2k}{x}[/tex]
Now compare :
[tex]\frac{k}{x}[/tex] : [tex]\frac{2k}{x}[/tex]
we see that y becomes doubled
A group of students collected the data shown below while attempting to measure the coefficient of static friction (of course, it looks like this group varied the amount of mass sitting on the block with each trial - this is not recommended). Nonetheless, what is their average coefficient of static friction?
Trial Mass of block (g) Hanging mass (kg)
1 105 0.053
2 165 0.081
3 220 0.118
4 280 0.149
5 315 0.180
6 385 0.198
Answer:
0.130
Explanation:
From the given data, the coefficient of static friction for each trial are:
1. 0.053
2. 0.081
3. 0.118
4. 0.149
5. 0.180
6. 0.198
The sum of the coefficient of static friction = 0.053 + 0.081 + 0.118 + 0.149 + 0.180 + 0.198
= 0.779
So that;
the average coefficient of static friction = [tex]\frac{sum of coefficient of static friction}{number of trials}[/tex]
= [tex]\frac{0.779}{6}[/tex]
= 0.12983
The average coefficient of static friction is 0.130
The average coefficient of static friction is 0.13.
The coefficient of static friction is obtained using the formula; μ = F/R
Where;
F = force acting on the body
R = reaction
μ = coefficient of static friction
The average of measurements is given as; ∑summation of measurements/number of measurements
We can see from the question that there were 6 measurements of the coefficient of static friction. Hence, the average coefficient of static friction is obtained from;
0.053 + 0.081 + 0.118 + 0.149 + 0.180 + 0.198/6
= 0.13
The average coefficient of static friction is 0.13
Learn more: https://brainly.com/question/8155254
А)
An automobile traveling along a straight road
increases its speed from 48 ft/s to 66 ft/s in
180 ft.
If the acceleration is constant, how much
time elapses while the auto moves the 180 ft?
Answer in units of s.
Answer:
4.5s
Explanation:
u=30m/s
v=50m/s
s=180m
a=constant(given)
By third equation of motion, v
2
=u
2
+2as
(50)
2
=(30)
2
+2a(180)
a=
3
40
m/s
2
By first equation of motion, v=u+at
50=30+(
9
40
)t
t=
2
9
=4.5sec
Review Question 1
A group of students collected the data shown below while attempting to
measure the coefficient of static friction (of course, it looks like this group
varied the amount of mass sitting on the block with each trial - this is not
recommended). Nonetheless, what is their average coefficient of static friction?
Mass of block (g)
Hanging mass (kg)
Trial
1
105
0.053
2
165
0.081
3
220
0.118
4
280
149
5
315
0.180
6
385
0.198
Answer:
The average coefficient of static friction = 0.130
Explanation:
The average coefficient of static friction = [tex]\frac{sum of coefficient of static friction}{number of trials}[/tex]
From the given question, the coefficient of static friction given are:
0.053, 0.081, 0.118, 0.149, 0.180, 0.198
Thus,
the sum of the given coefficient of static friction = 0.053 + 0.081 + 0.118 + 0.149 + 0.180 + 0.198
= 0.779
The average coefficient of static friction = [tex]\frac{0.779}{6}[/tex]
= 0.129833
= 0.130
Therefore, the average coefficient of static friction is 0.130.
This is my question
Answer:
N = 470 [N]
Explanation:
The normal force is defined as the reaction exerted by the surface where the body is located in the opposite direction to the weight component.
It can be easily calculated by means of the product of mass by gravitational acceleration.
N = m*g
where:
N = normal force [N] (units of Joules)
m = mass = 47 [kg]
g = gravity acceleration = 10 [N]
N = 47*10
N = 470 [N]
an a astronaut stands on the surface of a spherical asteroid that has a weak gravitational field but no atmosphere
Answer:
so what is your question that's not a question
An asteroid is a minor planet in the inner solar system. The asteroid orbits the sun and millions of asteroids exit as remains of planetesimals.
The weak gravitational field of the asteroid describes that there is no contact between the asteroid and the astronaut. As the asteroid has no atmosphere the astronaut jumps and drifts.Hence there is no contact as no gravitational force.
Learn more about the astronaut standing on the surface of a spherical asteroid.
brainly.com/question/13651731.
A Spring is pulled to 10cm and held in place with a force of 500N .what is the spring constant
We are given:
extension of the spring (x) = 10 cm OR 0.1 m
Force applied to keep it in position (F) = 500 N
Solving for the spring constant:
We know that F = kx (when the spring is extended)
replacing the variables with the given values
500 = k * 0.1
k = 5000 N/m
This means that to extend the spring by 1 m, we have to apply a force of 5000 N