Answer:
6.09m tall
Explanation:
use this;
U²=2as
200 J of heat is added to two gases, each in a sealed container. Gas 1 is in a rigid container that does not change volume. Gas 2 expands as it is heated, pushing out a piston that lifts a small weight. Which gas has the greater increase in its thermal energy?Which gas has the greater increase in its thermal energy?Gas 1Gas 2Both gases have the same increase in thermal energy.
Answer:
Gas 1
Explanation:
The reason for this is that for gases attached to both gases or containers, with a heat of 200 J, the change in volume is only observed in gas 2, whereas the volume of gas 1 is the same as that of gas. Therefore, the internal energy (heat) or thermal energy of the system is not utilized for Gas 1 and hence the absorption and transfer of energy is the same, whereas Gas 2 is propagated by the use of additional heat of heat. Thus there is a large increase in the thermal energy of Gas1.A circle has a radius of 13m Find the length of the arc intercepted by a central angle of .9 radians. Do not round any intermediate computations, and round your answer to the nearest tenth.
Answer:
11.7 m
Explanation:
The radius of the circle is 13 m.
The central angle of the arc is 0.9 radians
The length of an arc is given as:
L = r θ
where θ = central angle in radians = 0.9
=> L = 0.9 * 13 = 11.7 m
Length of the arc will be 11.7 m ≈ 10 m
What is an arc length?
Arc length refers to the distance between two points along a curve’s section.
Arc length = radius * theta
where
Arc length = ? to find
given :
radius = 13 m
theta ( central angle) = 0.9 radians
Arc length = 13 m * 0.9 radians
= 11.7 m ≈ 10 m
length of the arc will be 11.7 m ≈ 10 m
Learn more about Arc length
https://brainly.com/question/16403495?referrer=searchResults
#SPJ2
The electron density in copper is 8.49 × 1028 electrons/m3. When a 1.00 A current is present in a copper wire with a 0.40 cm2 cross-section, the electron drift velocity, in m/s, with direction defined relative to the current density, is
Answer:
Drift velocity in m/s is [tex]1.84 \times 10^{-8}\ m/s[/tex].
Explanation:
Formula for Drift Velocity is:
[tex]u = \dfrac{I}{nAq}[/tex]
Where I is the current
n is the number of electrons in 1 [tex]m^3[/tex] or the electron density
A is the area of cross section and
q is the charge of one electron.
We are given the following:
n = [tex]8.49 \times 10^{28}\ electrons/m^3[/tex]
I = 1 A
A = 0.40 [tex]cm^2[/tex] = 40 [tex]\times 10^{-4}[/tex] [tex]m^{2}[/tex]
We know that q = [tex]1.6\times10^{-19} C[/tex]
Putting all the values to find drift velocity:
[tex]u = \dfrac{1}{8.49 \times 10 ^{28} \times 40 \times 10^{-4}\times 1.6 \times 10^{-19}}\\u = \dfrac{1}{543.36 \times 10 ^{5} }\\u = 1.84 \times 10^{-8}\ m/s[/tex]
So, drift velocity in m/s is [tex]1.84 \times 10^{-8}\ m/s[/tex].
How much heat does it take to raise the temperature of 7.0 kg of water from
25-C to 46-C? The specific heat of water is 4.18 kJ/(kg.-C).
Use Q = mcTr-T)
A. 148 kJ
B. 176 kJ
C. 610 kJ
D. 320 kJ
Answer:
non of the above
Explanation:
Quantity of heat = mass× specific heat× change in temperature
m= 7kg c= 4.18 temp= 46-25=21°
.......H= 7×4.18×21= 614.46kJ
Answer:610 KJ
Explanation:A P E X answers
A string attached to an airborne kite is maintained at an angle of 41 degrees with the horizontal. If a total of 152 m of string is reeled in while bringing the kite back to the ground, what is the horizontal displacement of the kite in the process
Answer:
The horizontal displacement is [tex]Adj = 114.71 \ m[/tex]
Explanation:
From the question we are told that
The angle at which the string is maintained is [tex]\theta = 41 ^o[/tex]
The length of string reeled in is [tex]l = 152 \ m[/tex]
Using the SOHCAHTOA formula
We have that the hypotenuse(Hyp) is l = 152
Hence the horizontal displacement of the kite which is the Adjacent(Adj) can be evaluated as
[tex]cos \theta = \frac{Adj}{Hyp }[/tex]
substituting values
[tex]cos(41) = \frac{Adj}{152}[/tex]
=> [tex]Adj = 114.71 \ m[/tex]
A goalie kicks a soccer ball straight vertically into the air. It takes 5.00 s for the ball to reach its maximum height and come back down to the level of the crossbar. Assume the crossbar of a soccer goal is 2.44 m above the ground. (a) How fast was the ball originally moving when it was kicked. (b) How much longer would it take the ball to reach the ground?
Answer:
(a) vo = 24.98m/s
(b) t = 5.09 s
Explanation:
(a) In order to calculate the the initial speed of the ball, you use the following formula:
[tex]y=y_o+v_ot-\frac{1}{2}gt^2[/tex] (1)
y: vertical position of the ball = 2.44m
yo: initial vertical position = 0m
vo: initial speed of the ball = ?
g: gravitational acceleration = 9.8m/s²
t: time on which the ball is at 2.44m above the ground = 5.00s
You solve the equation (1) for vo and replace the values of the other parameters:
[tex]v_o=\frac{y-y_o+1/2gt^2}{t}[/tex]
[tex]v_o=\frac{2.44m-0.00m+1/2(9.8m/s^2)(5.00s)^2}{5.00s}\\\\v_o=24.98\frac{m}{s}[/tex]
The initial speed of the ball is 24.98m/s
(b) To find the time the ball takes to arrive to the ground you use the equation (1) for y = 0m (ground) and solve for t:
[tex]0=24.98t-\frac{1}{2}(9.8)t^2\\\\t=5.09s[/tex]
The time that the ball takes to arrive to the ground is 5.09s
We have that for the Question, it can be said that the speed of ball and How much longer would it take the ball to reach the ground is
u=25.13m/sX=0.095sec
From the question we are told
A goalie kicks a soccer ball straight vertically into the air. It takes 5.00 s for the ball to reach its maximum height and come back down to the level of the crossbar. Assume the crossbar of a soccer goal is 2.44 m above the ground.
(a) How fast was the ball originally moving when it was kicked.
(b) How much longer would it take the ball to reach the ground?
a)
Generally the Newton equation for the Motion is mathematically given as
[tex]S=ut+1/2at^2\\\\Therefore\\\\2.44=ut+1/2(9.8)(5)^2\\\\u=25.13m/s\\\\[/tex]
b)
Generally the Newton equation for the Motion is mathematically given as
[tex]S=ut+1/2at^2\\\\Therefore\\\\t=\frac{-24}{a}\\\\t=\frac{-2*25.013}{9.81}\\\\t=5.095sec\\\\[/tex]
Therefore
[tex]X=5.095-5[/tex]
X=0.095sec
For more information on this visit
https://brainly.com/question/23379286
Two small identical speakers are connected (in phase) to the same source. The speakers are 3 m apart and at ear level. An observer stands at X, 4 m in front of one speaker. If the amplitudes are not changed, the sound he hears will be least intense if the wavelength is:
a. 1 m
b. 2 m
c. 3 m
d. 4 m
e. 5 m
Answer:
b. 2 m
Explanation:
Given that:
the identical speakers are connected in phases ;
Let assume ; we have speaker A and speaker B which are = 3 meter apart
An observer stands at X = 4m in front of one speaker.
If the amplitudes are not changed, the sound he hears will be least intense if the wavelength is:
From above; the distance between speaker A and speaker B can be expressed as:
[tex]\sqrt{3^2 + 4^2 } \\ \\ = \sqrt{9+16 } \\ \\ = \sqrt{25} \\ \\ = 5 \ m[/tex]
The path length difference will now be:
= 5 m - 4 m
= 1 m
Since , we are to determine the least intense sound; the destructive interference for that path length will be half the wavelength; which is
= [tex]\dfrac{1}{2}*4 \ m[/tex]
= 2 m
The sound will be heard with least intensity if the wavelength is 2 m. Hence, option (b) is correct.
Given data:
The distance between the speakers is, d = 3 m.
The distance between the observer and speaker is, s = 4 m.
The amplitude of sound wave is the vertical distance from the base to peak of wave. Since sound amplitudes are not changed in the given problem. Then the distance between speaker A and speaker B can be expressed as:
[tex]=\sqrt{3^{2}+4^{2}}\\\\=\sqrt{25}\\\\=5\;\rm m[/tex]
And the path length difference is,
= 5 m - 4 m
= 1 m
Since , we are to determine the least intense sound; the destructive
interference for that path length will be half the wavelength; which is
[tex]=\dfrac{1}{2} \times s\\\\=\dfrac{1}{2} \times 4[/tex]
= 2 m
Thus, we can conclude that the sound will be heard with least intensity if the wavelength is 2 m.
Learn more about the interference here:
https://brainly.com/question/16098226
Doubling the potential across a given capacitor causes the energy stored in that capacitor to reduce to:_______
a. one-half.
b. double.
c. reduce to one-fourth.
d. quadruple.
Answer:
D. quadrupleExplanation:
The stored energy varies with the square of the electric charge stored in the capacitor. If you double the charge, the stored energy in the capacitor will quadruple or increase by a factor of 4.
Doubling the potential across a given capacitor causes the energy stored in that capacitor to reduce to :
D. Quadruple
"Energy"Doubling the potential across a given capacitor causes the energy stored in that capacitor to reduce to Quadruple.
The stored energy shifts with the square of the electric charge put away within the capacitor.
In case you twofold the charge, the put away vitality within the capacitor will fourfold or increment by a calculate of 4.
Thus, the correct answer is D.
Learn more about "energy":
https://brainly.com/question/1932868?referrer=searchResults
From largest to smallest, rank the gravitational force that each planet exerts on the star with mass M. Distances are as follows:_________.a) Planet A is 3d from M b) Planet B is 1d from M c) Planet C is 1d from M d) Planet D is 2d from M e) Planet E is 3d from M
Answer:
Planet A = planet B > planet D > planet A = planet E
Explanation:
Gravitational force obeys the inverse square law. That is,
Gravitation force F is inversely proportional to the square of the distance between the two masses.
The larger the distance, the weaker the gravitational force F.
From largest to smallest, the rank of gravitational force that each planet exerts on the star with mass M. Distances are as follows:
Planet B, planet C, planet D, planet planet A, planet E.
Planet B and C may experience different the same gravitational force depending on their masses. This is also applicable to planet A and E.
Therefore,
Planet A = planet B > planet D > planet A = planet E
An inquisitive physics student and mountain climber climbs a 47.0-m-high cliff that overhangs a calm pool of water. He throws two stones vertically downward, 1.00 s apart, and observes that they cause a single splash. The first stone has an initial speed of 2.12 m/s.
(a) How long after release of the first stone do the two stones hit the water?
(b) What initial velocity must the second stone have if the two stones are to hit the water simultaneously?
magnitude =
(c) What is the speed of each stone at the instant the two stones hit the water?
first stone =
second stone =
Answer:
a) Only the first root is physically reasonable. Therefore, both stones hit the water in 2.866 seconds, b) The initial velocity of the second stone is -16.038 meters per second, c) The speed of the first stone is 30.227 meters per second and the speed of the second stone is 34.338 meters per second.
Explanation:
a) The time after the release after the release of the first stone can be get from the following kinematic formula for the first rock:
[tex]y_{1} = y_{1,o} + v_{1,o} \cdot t +\frac{1}{2}\cdot g \cdot t^{2}[/tex]
Where:
[tex]y_{1}[/tex] - Final height of the first stone, measured in meters.
[tex]y_{1,o}[/tex] - Initial height of the first stone, measured in meters.
[tex]v_{1,o}[/tex] - Initial speed of the first stone, measured in meters per second.
[tex]t[/tex] - Time, measured in seconds.
[tex]g[/tex] - Gravity constant, measured in meters per square second.
Given that [tex]y_{1,o} = 47\,m[/tex], [tex]y_{1} = 0\,m[/tex], [tex]v_{1,o} = -2.12\,\frac{m}{s}[/tex] and [tex]g = -9.807\,\frac{m}{s^{2}}[/tex], the following second-order polynomial is built:
[tex]-4.984\cdot t^{2} - 2.12\cdot t + 47 = 0[/tex]
Roots of the polynomial are, respectively:
[tex]t_{1} \approx 2.866\,s[/tex] and [tex]t_{2}\approx -3.291\,s[/tex]
Only the first root is physically reasonable. Therefore, both stones hit the water in 2.866 seconds.
b) As the second stone is thrown a second later than first one, its height is represented by the following kinematic expression:
[tex]y_{2} = y_{2,o} + v_{2,o}\cdot (t-t_{o}) + \frac{1}{2}\cdot g \cdot (t-t_{o})^{2}[/tex]
[tex]y_{2}[/tex] - Final height of the second stone, measured in meters.
[tex]y_{2,o}[/tex] - Initial height of the second stone, measured in meters.
[tex]v_{2,o}[/tex] - Initial speed of the second stone, measured in meters per second.
[tex]t[/tex] - Time, measured in seconds.
[tex]t_{o}[/tex] - Initial absolute time, measured in seconds.
[tex]g[/tex] - Gravity constant, measured in meters per square second.
Given that [tex]y_{2,o} = 47\,m[/tex], [tex]y_{2} = 0\,m[/tex], [tex]t_{o} = 1\,s[/tex], [tex]t = 2.866\,s[/tex] and [tex]g = -9.807\,\frac{m}{s^{2}}[/tex], the following expression is constructed and the initial speed of the second stone is:
[tex]1.866\cdot v_{2,o}+29.926 = 0[/tex]
[tex]v_{2,o} = -16.038\,\frac{m}{s}[/tex]
The initial velocity of the second stone is -16.038 meters per second.
c) The final speed of each stone is determined by the following expressions:
First stone
[tex]v_{1} = v_{1,o} + g \cdot t[/tex]
Second stone
[tex]v_{2} = v_{2,o} + g\cdot (t-t_{o})[/tex]
Where:
[tex]v_{1,o}, v_{1}[/tex] - Initial and final velocities of the first stone, measured in meters per second.
[tex]v_{2,o}, v_{2}[/tex] - Initial and final velocities of the second stone, measured in meters per second.
If [tex]v_{1,o} = -2.12\,\frac{m}{s}[/tex] and [tex]v_{2,o} = -16.038\,\frac{m}{s}[/tex], the final speeds of both stones are:
First stone
[tex]v_{1} = -2.12\,\frac{m}{s} + \left(-9.807\,\frac{m}{s^{2}} \right)\cdot (2.866\,s)[/tex]
[tex]v_{1} = -30.227\,\frac{m}{s}[/tex]
Second stone
[tex]v_{2} = -16.038\,\frac{m}{s} + \left(-9.807\,\frac{m}{s^{2}} \right) \cdot (2.866\,s-1\,s)[/tex]
[tex]v_{2} = -34.338\,\frac{m}{s}[/tex]
The speed of the first stone is 30.227 meters per second and the speed of the second stone is 34.338 meters per second.
Given a double slit apparatus with slit distance 1 mm, what is the theoretical maximum number of bright spots that I would see when I shine light with a wavelength 400 nm on the slits
Answer:
The maximum number of bright spot is [tex]n_{max} =5001[/tex]
Explanation:
From the question we are told that
The slit distance is [tex]d = 1 \ mm = 0.001 \ m[/tex]
The wavelength is [tex]\lambda = 400 \ nm = 400*10^{-9 } \ m[/tex]
Generally the condition for interference is
[tex]n * \lambda = d * sin \theta[/tex]
Where n is the number of fringe(bright spots) for the number of bright spots to be maximum [tex]\theta = 90[/tex]
=> [tex]sin( 90 )= 1[/tex]
So
[tex]n = \frac{d }{\lambda }[/tex]
substituting values
[tex]n = \frac{ 1 *10^{-3} }{ 400 *10^{-9} }[/tex]
[tex]n = 2500[/tex]
given there are two sides when it comes to the double slit apparatus which implies that the fringe would appear on two sides so the maximum number of bright spots is mathematically evaluated as
[tex]n_{max} = 2 * n + 1[/tex]
The 1 here represented the central bright spot
So
[tex]n_{max} = 2 * 2500 + 1[/tex]
[tex]n_{max} =5001[/tex]
A 2.0-kg block sliding on a frictionless, horizontal surface is attached to one end of a horizontal spring (k = 600 N/m) which has its other end fixed. The speed of the block when the spring is extended 20 cm is equal to 3.0 m/s. What is the maximum speed of this block as it oscillates?
Answer:
Maximum speed of the block, [tex]v_{max} = 4.58 m/s[/tex]
Explanation:
Mass of the block, m = 2.0 kg
Spring constant, k = 600 N/m
Spring extension, x = 20 cm = 0.2 m
Speed of the block due to the extension, v = 3.0 m/s
First, Potential energy, PE stored in the spring:
PE = 0.5 kx²
PE = 0.5 * 600 * 0.2²
PE = 12 J
Calculate the kinetic energy of the block due to the extension:
[tex]KE_x = 0.5 mv^2\\KE_x = 0.5 * 2 * 3^2\\KE_x = 9 J[/tex]
The maximum Kinetic Energy of the block will be:
[tex]KE_{max} = 0.5 m v_{max}^2\\KE_{max} = 0.5 * 2 * v_{max}^2\\KE_{max} = v_{max}^2[/tex]
[tex]KE_{max} = KE_x + PE\\v_{max}^2 = 9 + 12\\ v_{max}^2 = 21\\ v_{max} = \sqrt{21} \\ v_{max} = 4.58 m/s[/tex]
An experimenter finds that standing waves on a string fixed at both ends occur at 24 Hz and 32 Hz , but at no frequencies in between. Part A What is the fundamental frequency
Answer:
8 Hz
Explanation:
Given that
Standing wave at one end is 24 Hz
Standing wave at the other end is 32 Hz.
Then the frequency of the standing wave mode of a string having a length, l, is usually given as
f(m) = m(v/2L), where in this case, m could be 1. 2. 3. 4 etc
Also, another formula is given as
f(m) = m.f(1), where f(1) is the fundamental frequency..
Thus, we could say that
f(m+1) - f(m) = (m + 1).f(1) - m.f(1) = f(1)
And as such,
f(1) = 32 - 24
f(1) = 8 Hz
Then, the fundamental frequency needed is 8 Hz
Charge of uniform surface density (0.20 nC/m2) is distributed over the entire xy plane. Determine the magnitude of the electric field at any point having z
The question is not complete, the value of z is not given.
Assuming the value of z = 4.0m
Answer:
the magnitude of the electric field at any point having z(4.0 m) =
E = 5.65 N/C
Explanation:
given
σ(surface density) = 0.20 nC/m² = 0.20 × 10⁻⁹C/m²
z = 4.0 m
Recall
E =F/q (coulumb's law)
E = kQ/r²
σ = Q/A
A = 4πr²
∴ The electric field at point z =
E = σ/zε₀
E = 0.20 × 10⁻⁹C/m²/(4 × 8.85 × 10⁻¹²C²/N.m²)
E = 5.65 N/C
g The radius of a spherical ball increases at a rate of 3 m/s. At what rate is the volume changing when the radius is equal to 2 meters
Answer:
dV/dt = 150.79 m^3/s
Explanation:
In order to calculate the rate of change of the volume, you calculate the derivative, respect to the radius of the sphere, of the volume of the sphere, as follow:
[tex]\frac{dV}{dt}=\frac{d}{dt}(\frac{4}{3}\pi r^3)[/tex] (1)
r: radius of the sphere
You calculate the derivative of the equation (1):
[tex]\frac{dV}{dt}=\frac{d}{dt}(\frac{4}{3}\pi r^3)=3\frac{4}{3}\pi r^2\frac{dr}{dt}=4\pi r^2\frac{dr}{dt}\\\\\frac{dV}{dt}=4\pi r^2\frac{dr}{dt}[/tex](2)
where dr/dt = 3m/s
You replace the values of dr/dt and r=2m in the equation (2):
[tex]\frac{dV}{dt}=4\pi (2m)^2(3\frac{m}{s})=150.79\frac{m^3}{s}[/tex]
The rate of change of the sphere, when it has a radius of 2m, is 150.79m^3/s
A 2.5-kg object falls vertically downward in a viscous medium at a constant speed of 2.5 m/s. How much work is done by the force the viscous medium exerts on the object as it falls 80 cm?
Answer:
The workdone is [tex]W_v = - 20 \ J[/tex]
Explanation:
From the question we are told that
The mass of the object is [tex]m = 2.5 \ kg[/tex]
The speed of fall is [tex]v = 2.5 \ m/s[/tex]
The depth of fall is [tex]d = 80\ cm = 0.8 \ m[/tex]
Generally according to the work energy theorem
[tex]W = \frac{1}{2} mv_2^2 - \frac{1}{2} mv_1^2[/tex]
Now here given the that the velocity is constant i.e [tex]v_1 = v_2 = v[/tex] then
We have that
[tex]W = \frac{1}{2} mv^2 - \frac{1}{2} mv^2 = 0 \ J[/tex]
So in terms of workdone by the potential energy of the object and that of the viscous liquid we have
[tex]W = W_v - W_p[/tex]
Where [tex]W_v[/tex] is workdone by viscous liquid
[tex]W_p[/tex] is the workdone by the object which is mathematically represented as
[tex]W_p = mgd[/tex]
So
[tex]0 = W_v + mgd[/tex]
=> [tex]W_v = - m * g * d[/tex]
substituting values
[tex]W_v = - (2.5 * 9.8 * 0.8)[/tex]
[tex]W_v = - 20 \ J[/tex]
Determine the minimum gauge pressure needed in the water pipe leading into a building if water is to come out of a faucet on the fourteenth floor, 43
Answer:
The gauge pressure is [tex]P = 4.2*10^{5} \ N/m^2[/tex]
Explanation:
From the question we are told that
The height of the 14th floor from the point where the water entered the building is h = 43 m
The gauge pressure is mathematically represented as
[tex]P = mgh[/tex]
Where the m is the mass of the water which is mathematically represented as
[tex]m = \frac{\rho}{V}[/tex]
Where [tex]\rho[/tex] is the density of the water which has a constant value of [tex]\rho = 1000 \ kg/m^3[/tex] and this standard value of density the volume is [tex]1 m^3[/tex] so
[tex]m = \frac{1000}{1}[/tex]
[tex]m = 1000 \ kg[/tex]
Thus
[tex]P = 1000 * 9.8 * 43[/tex]
[tex]P = 4.2*10^{5} \ N/m^2[/tex]
A pickup truck moves at 25 m/s toward the east. Ahmed is standing in the back and throws a baseball in what to him is the southwest direction at 28 m/s (with respect to the truck). A person at rest on the ground would see the ball moving how fast in what direction? HTML EditorKeyboard Shortcuts
Answer:
Speed = 20 m/sec at 75 deg South of East = 20 m/sec at 15 deg East of South
Explanation:
given data
truck moves = 25 m/s toward the east.
throws a baseball = 28 m/s southwest
solution
first we take here Speed of truck w.r.to ground i.e. V(p/g) = 25 m/sec toward the east so we can say
V(p/g) = (25 i) m/sec ........................1
and
Speed of baseball w.r.t. pickup i.e. V(b/p) = 28 m/sec toward the South West and we know that south west direction is in third quadrant
and here both component (x and y) are negative
So that we can say it
V(b/p) = -28 × cos(45) i - 28 × sin(45) j = -19.8 i - 19.8 j
and
now we use here relative motion velocity for ball w.r.t ground
V(b/g) = V(b/p) + V(p/g ) ..........................2
put here value and we get
V(b/g) = (-19.8 i - 19.8 j) + 25 i = 5.2 i - 19.8 j
so
Magnitude of that velocity
| V(b/g) | = [tex]\sqrt{(5.2^2 + 19.8^2)}[/tex]
| V(b/g) | = 20.47 m/sec
so that Direction will be here
Direction = arctan (19.8 ÷ 5.2)
Direction = 75.3° South of East
so that
Speed = 20.47 m/sec at 75.3 deg South of East
and 2 significant
Speed = 20 m/sec at 75 deg South of East = 20 m/sec at 15 deg East of South
The back wall of an auditorium is 30.0 m from the stage. If you are seated in the middle row, how much time elapses between a sound from the stage reaching your ear directly and the same sound reaching your ear after reflecting from the back wall?
Answer:
0.0875 secExplanation:
Using the relationship to calculate the time that elapse 2x = vt
x = distance between the source and the reflector
v is the velocity of sound in air
t = time elapsed
Given x = 30.0m and v = 343m/s
substituting the values into the formula above to get the total time elapsed t;
t = 2x/v
t = 2(30)/343
t= 60/343
t = 0.175sec
If you are seated in the middle row, the time that will elapse between the sound from the stage reaching your ear directly will be;
0.175/2 = 0.0875 secs
In a uniform electric field, the magnitude of torque is given by:-
Answer:
Electric dipole
Explanation:
the dipole axis makes an angle with the electric field. depending on direction (clockwise/aniclockwise) you get the torque
Hope this helps
Consider the Earth and the Moon as a two-particle system.
Find an expression for the gravitational field g of this two-particle system as a function of the distance r from the center of the Earth. (Do not worry about points inside either the Earth or the Moon. Assume the Moon lies on the +r-axis. Give the scalar component of the gravitational field. Do not substitute numerical values; use variables only. Use the following as necessary: G, Mm, Me, r, and d for the distance from the center of Earth to the center of the Moon.)"
sorry but I don't understand
Two people play tug of war. The 100-kg person on the left pulls with 1,000 N, and the 70-kg person on the right pulls with 830 N. Assume that neither person releases their grip on the rope with either hand at any time, assume that the rope is always taut, and assume that the rope does not stretch. What is the magnitude of the tension in the rope in Newtons
Answer:
The tension on the rope is T = 900 N
Explanation:
From the question we are told that
The mass of the person on the left is [tex]m_l = 100 \ kg[/tex]
The force of the person on the left is [tex]F_l = 1000 \ N[/tex]
The mass of the person on the right is [tex]m_r = 70 \ kg[/tex]
The force of the person on the right is [tex]F_r = 830 \ N[/tex]
Generally the net force is mathematically represented as
[tex]F_{Net} = F_l - F_r[/tex]
substituting values
[tex]F_{Net} = 1000-830[/tex]
[tex]F_{Net} = 170 \ N[/tex]
Now the acceleration net acceleration of the rope is mathematically evaluated as
[tex]a = \frac{F_{net}}{m_I + m_r }[/tex]
substituting values
[tex]a = \frac{170}{100 + 70 }[/tex]
[tex]a = 1 \ m/s ^2[/tex]
The force [tex]m_i * a[/tex]) of the person on the left that caused the rope to accelerate by a is mathematically represented as
[tex]m_l * a = F_r -T[/tex]
Where T is the tension on the rope
substituting values
[tex]100 * 1 = 1000 - T[/tex]
=> T = 900 N
A cowboy fires a silver bullet with a muzzle speed of 200 m/s into the pine wall of a saloon. Assume all the internal energy generated by the impact remains with the bullet. What is the temperature change of the bullet?
Explanation:
KE = q
½ mv² = mCΔT
ΔT = v² / (2C)
ΔT = (200 m/s)² / (2 × 236 J/kg/°C)
ΔT = 84.7°C
This question involves the concepts of the law of conservation of energy.
The temperature change of the bullet is "84.38°C".
What is the Law of Conservation of Energy?According to the law of conservation of energy, total energy of the system must remain constant. Therefore, in this situation.
[tex]Kinetic\ energy\ of\ bullet\ before\ impact=heat\ absorbed\ in\ bullet\\\\\frac{1}{2}mv^2=mC\Delta T\\\\\Delta T = \frac{v^2}{2C}[/tex]
where,
ΔT = change in temperature of the bullet = ?C = specific heat capacity of silver = 237 J/kg°Cv = speed of bullet = 200 m/sTherefore,
[tex]\Delta T = \frac{(200\ m/s)^2}{2(237\ J/kg.^oC)}[/tex]
ΔT = 84.38°C
Learn more about the law of conservation of energy here:
https://brainly.com/question/20971995
#SPJ2
Which of the following emissions is associated with burning coal? a. sulfur dioxide b. carbon dioxide c. nitrous oxides d. all of the above
Answer:
all of the above
Explanation:
because it is.
To get an idea of the order of magnitude of inductance, calculate the self-inductance in henries for a solenoid with 900 loops of wire wound on a rod 6 cm long with radius 1 cm?
Answer:
The self-inductance is [tex]L = 0.0053 \ H[/tex]
Explanation:
From the question we are told that
The number of loops is [tex]N = 900[/tex]
The length of the rod is [tex]l =6 \ cm = 0.06 \ m[/tex]
The radius of the rod is [tex]r = 1 \ cm = 0.01 \ m[/tex]
The self-inductance for the solenoid is mathematically represented as
[tex]L = \frac{\mu_o * A * N^2 }{l}[/tex]
Now the cross-sectional of the solenoid is mathematically evaluated as
[tex]A = \pi r^2[/tex]
substituting values
[tex]A =3.142 * 0.01 ^2[/tex]
[tex]A = 3.142 *10^{-4} \ m^2[/tex]
and [tex]\mu_o[/tex] is the permeability of free space with a value [tex]\mu_o = 4\pi * 10^{-7} N/A^2[/tex]
substituting values into above equation
[tex]L = \frac{ 4\pi * 10^{-7} ^2* 3.142*10^{-4} * 900^2 }{0.06}[/tex]
[tex]L = 0.0053 \ H[/tex]
A ball of mass m makes a head-on elastic collision with a second ball (at rest) and rebounds with a speed equal to 0.370 its original speed.What is the mass of the second ball?
Answer:
The mass of the second ball is [tex]m_2 = 2.175m \ kg[/tex]
Explanation:
From the question we are told that
The mass of the first ball is m
Let assume
The original speed of the first ball is [tex]u_1[/tex]
The rebound speed is [tex]v_1 = 0.370u_1 \ m/s[/tex]
According to the law of momentum conservation
[tex]m_1 u_1 + m_2 u_2 = -m_1 v_1 + m_2 v_2[/tex]
The second ball is at rest so
[tex]u_2 = 0[/tex]
And the negative sign shows that it is a rebound velocity
[tex]mu_1 + = -m v_1 + m_2 v_2[/tex]
=> [tex]mu_1 + = -0.370 mu_1 + m_2 v_2[/tex]
Now we are told that the collision is elastic, this means that the velocity of approach will be equal to the velocity of separation
So
[tex]u_1 = v_1 + v_2[/tex]
=> [tex]u_1 = 0.370u_1 + v_2[/tex]
=> [tex]v_2 = 0.63 \ u_1[/tex]
substituting this into equation above
[tex]mu_1 + = -0.370 mu_1 + m_2 (0.63 u_1)[/tex]
[tex]1.370 mu_1 = m_2 (0.63 u_1)[/tex]
=> [tex]m_2 = 2.175m \ kg[/tex]
The mass of the second ball in terms of the first ball, m, is 2.175 m.
The given parameters;
mass of the ball, = mlet the initial velocity of the first ball, = u₁initial velocity of the second ball, u₂ = 0final velocity of the first first ball, v₁ = 0.37u₁Apply the principle of conservation of linear momentum to determine the mass of the second ball as shown below;
[tex]m_1 u_1 + m_2 u_2 = m_1v_1 + m_2 v_2\\\\mu_1 + m_2(0) = m(-0.37u_1) + m_2v_2\\\\mu_1 = -0.37u_1m + m_2v_2\\\\mu_1 + 0.37mu_1 = m_2v_2\\\\1.37 mu_1 = m_2 v_2 \ --(1)[/tex]
Apply one-dimensional velocity equation for elastic collision;
[tex]u_1 + v_1 = u_2 + v_2\\\\u_1 + (-0.37u_1) = 0 + v_2\\\\u_1 -0.37u_1 = v_2\\\\v_2 = 0.63 u_1[/tex]
substitute the value of v₂ into the above equation;
[tex]1.37mu_1 = m_2(0.63u_1)\\\\1.37mu_1 = 0.63m_2u_1\\\\m_2 = \frac{1.37mu_1}{0.63u_1} \\\\m_2 = 2.175 \ m[/tex]
Thus, the mass of the second ball in terms of the first ball, m, is 2.175 m.
Learn more here:https://brainly.com/question/3227235
When a certain capacitor carries charge of magnitude Q on each of its plates, it stores energy Ep. In order to store twice as much energy, how much charge should it have on its plates
2Q
Explanation:
When a capacitor carries some certain charge, the energy stored in the capacitor is its electric potential energy E. The magnitude of this potential energy is given by;
E = [tex]\frac{1}{2}qV[/tex] ------------(i)
Where;
q = charge between the plates of the capacitor
V = potential difference between the plates of the capacitor
From the question;
q = Q
E = Ep
Therefore, equation (i) becomes;
Ep = [tex]\frac{1}{2} QV[/tex] ----------------(ii)
Make V subject of the formula in equation (ii)
V = [tex]\frac{2E_{p}}{Q}[/tex]
Now, when the energy is doubled i.e E = 2Ep, equation (i) becomes;
2Ep = [tex]\frac{1}{2}qV[/tex]
Substitute the value of V into the equation above;
2Ep = [tex]\frac{1}{2}[/tex]([tex]q *\frac{2E_{p}}{Q}[/tex])
Solve for q;
[tex]2E_{p}[/tex] = [tex]\frac{2qE_p}{2Q}[/tex]
[tex]2E_{p}[/tex] = [tex]\frac{qE_p}{Q}[/tex]
[tex]q = 2Q[/tex]
Therefore, the charge, when the energy stored is twice the originally stored energy, is twice the original charge. i.e 2Q
An interference pattern is produced by light with a wavelength 550 nm from a distant source incident on two identical parallel slits separated by a distance (between centers) of 0.500 mm .
a. If the slits are very narrow, what would be the angular position of the second- order, two-slit interference maxima?
b. Let the slits have a width 0.300 mm. In terms of the intensity lo at the center of the central maximum, what is the intensity at the angular position in part "a"?
Answer:
a
[tex]\theta = 0.0022 rad[/tex]
b
[tex]I = 0.000304 I_o[/tex]
Explanation:
From the question we are told that
The wavelength of the light is [tex]\lambda = 550 \ nm = 550 *10^{-9} \ m[/tex]
The distance of the slit separation is [tex]d = 0.500 \ mm = 5.0 *10^{-4} \ m[/tex]
Generally the condition for two slit interference is
[tex]dsin \theta = m \lambda[/tex]
Where m is the order which is given from the question as m = 2
=> [tex]\theta = sin ^{-1} [\frac{m \lambda}{d} ][/tex]
substituting values
[tex]\theta = 0.0022 rad[/tex]
Now on the second question
The distance of separation of the slit is
[tex]d = 0.300 \ mm = 3.0 *10^{-4} \ m[/tex]
The intensity at the the angular position in part "a" is mathematically evaluated as
[tex]I = I_o [\frac{sin \beta}{\beta} ]^2[/tex]
Where [tex]\beta[/tex] is mathematically evaluated as
[tex]\beta = \frac{\pi * d * sin(\theta )}{\lambda }[/tex]
substituting values
[tex]\beta = \frac{3.142 * 3*10^{-4} * sin(0.0022 )}{550 *10^{-9} }[/tex]
[tex]\beta = 0.06581[/tex]
So the intensity is
[tex]I = I_o [\frac{sin (0.06581)}{0.06581} ]^2[/tex]
[tex]I = 0.000304 I_o[/tex]
Three containers are filled with water to the same height and have the same surface area at the base, but the total weight of water is different for each. Which container has the greatest total force acting on its base
The container has the greatest total force acting on its base is the conatainer with the greatest total weight.
How to find which container has the greatest total force acting on its base?For each container, there is a pressure, P acting on its base given by
P = F/A where
F = force on base and A = area of baseNow, since the force on the base is the weight of water acting on the base, W, we have that
P = W/A where w = total weight of water acting on base
Now, for each container, the area of base is the same. So, we have that
P ∝ W
So, we see that the pressure is directly proportional to the weight on the container.
Since pressure is directly proportional to force, we see that the force on the base is directly proportional to the weight of water acting on the base.
So, for the greatest force acting on the base, we would have the greatest total weight of water acting on the base.
So, the container has the greatest total force acting on its base is the conatainer with the greatest total weight.
Learn more about force here:
https://brainly.com/question/25239010
#SPJ1
Two cannonballs are dropped from a second-floor physics lab at height h above the ground. Ball B has four times the mass of ball A. When the balls pass the bottom of a first-floor window at height above the ground, the relation between their kinetic energies, KA and KB, is
Answer:
1:4
Explanation:
The formula for calculating kinetic energy is:
[tex]KE=\dfrac{1}{2}mv^2[/tex]
If the mass is multiplied by 4, then, the kinetic energy must be increased by 4 as well. Since they will be travelling at the same speed when they are at the same point, the relation between KA and KB must be 1:4 or 1/4. Hope this helps!
The relation between the kinetic energies of the freely falling balls A and B is obtained as [tex]\frac{KE_{A}}{KE_{B}} =\frac{1}{4}[/tex].
Kinetic EnergyThe kinetic energy of an object depends on the mass and velocity with which it moves.
While under free-fall, the mass of an object does not affect the velocity with which it falls.
So, the velocities of both the balls are the same.
Let the mass of ball A is 'm'
So, the mass of ball B is '4m'
The kinetic energy of ball A is given by;
[tex]KE_{A}=\frac{1}{2} mv^2[/tex]
The kinetic energy of ball B is given by;
[tex]KE_{B}=\frac{1}{2} 4mv^2 = 2mv^2[/tex]
Therefore, the ratio of kinetic energies of A and B is,
[tex]\frac{KE_{A}}{KE_{B}} =\frac{1}{4}[/tex]
Learn more about kinetic energy here:
https://brainly.com/question/11580018