A tank is full of oil weighing 20 lb/ft^3. The tank is a right rectangular prism with a width of 2 feel, a depth of 2 feet, and a height of 3 feat. Find the work required to pump the water to a height of 2 feet above the top of the tank

Answers

Answer 1

The work required to pump the water to a height of 2 feet above the top of the tank is 5120 Joules.

Given Data:

The density of the oil = 20 lb/ft³

Width of the tank = 2 ft

Depth of the tank = 2 ft

Height of the tank = 3 ft

Let the distance from the top of the tank to the surface of the liquid be h.

The total work done is given by

W = Wh (volume of the liquid displaced) × p (density of the liquid) × g (acceleration due to gravity)

Where volume of the liquid displaced is the difference between the volume of the tank and the volume of the liquid.

Volume of the tank = length × width × height

= 2 × 2 × 3

= 12 cubic feet.

Volume of the liquid = 2 × 2 × (3 - h)

= 4 (3 - h) cubic feet.

Volume of the liquid displaced = 12 - 4 (3 - h)

= 4h cubic feet.

Density of the liquid = 20 lb/ft³

Acceleration due to gravity = 32 ft/s²W

= Whpg

= 4h × 20 × 32

= 2560h Joules.

Know more about the density

https://brainly.com/question/1354972

#SPJ11


Related Questions

Which of the following would most likely represent a reliable range of MPLHs in a school foodservice operation?

Group of answer choices

13-18

1.4-2.7

3.5-3.6

275-350

Answers

MPLHs (Meals Per Labor Hour) is a productivity measure used to evaluate how effectively a foodservice operation is using its labor.

A higher MPLH rate indicates better efficiency as it means the operation is producing more meals per labor hour.  the MPLH range varies with the size and scale of the foodservice operation.  out of the given options, the most reliable range of MPLHs in a school foodservice operation is 3.5-3.6.

The range 3.5-3.6 is the most likely representation of a reliable range of MPLHs in a school foodservice operation. Generally, in a school foodservice operation, an MPLH of 3.0 or above is considered efficient. An MPLH of less than 3.0 indicates inefficiency, and steps need to be taken to improve productivity.  

The 3.5-3.6 is the most reliable range of MPLHs for a school foodservice operation.

To know more about Meals Per Labor Hour visit:-

https://brainly.com/question/32330810

#SPJ11

This assignment requires you to use functions from the math library to calculate trigonometric results. Write functions to do each of the following: - Calculate the adjacent length of a right triangle given the hypotenuse and the adjacent angle. - Calculate the opposite length of a right triangle given the hypotenuse and the adjacent angle. - Calculate the adjacent angle of a right triangle given the hypotenuse and the opposite length. - Calculate the adjacent angle of a right triangle given the adjacent and opposite lengths. These must be four separate functions. You may not do math in the main program for this assignment. As the main program, include test code that asks for all three lengths and the angle, runs the calculations to

Answers

The math library has a set of methods that can be used to work with different mathematical operations. The math library can be used to calculate the trigonometric results.

The four separate functions that can be created with the help of math library for the given problem are:Calculate the adjacent length of a right triangle given the hypotenuse and the adjacent angle:When we know the hypotenuse and the adjacent angle of a right triangle, we can calculate the adjacent length of the triangle. Here is the formula to calculate the adjacent length: adjacent_length = math.cos(adjacent_angle) * hypotenuseCalculate the opposite length of a right triangle given the hypotenuse and the adjacent angle:When we know the hypotenuse and the adjacent angle of a right triangle, we can calculate the opposite length of the triangle.

Here is the formula to calculate the opposite length:opposite_length = math.sin(adjacent_angle) * hypotenuseCalculate the adjacent angle of a right triangle given the hypotenuse and the opposite length:When we know the hypotenuse and the opposite length of a right triangle, we can calculate the adjacent angle of the triangle. Here is the formula to calculate the adjacent angle:adjacent_angle = math.acos(opposite_length / hypotenuse)Calculate the adjacent angle of a right triangle given the adjacent and opposite lengths:When we know the adjacent length and opposite length of a right triangle, we can calculate the adjacent angle of the triangle. Here is the formula to calculate the adjacent angle:adjacent_angle = math.atan(opposite_length / adjacent_length)

We have seen how math library can be used to solve the trigonometric problems. We have also seen four separate functions that can be created with the help of math library to solve the problem that requires us to calculate the adjacent length, opposite length, and adjacent angles of a right triangle.

To know more about  math visit

https://brainly.com/question/30200246

#SPJ11

Assume that the joint distribution of the life times X and Y of two electronic components has the joint density function given by
f(x,y)=e −2x,x≥0,−1 (a) Find the marginal density function and the marginal cumulative distribution function of random variables X and Y.
(b) Give the name of the distribution of X and specify its parameters.
(c) Give the name of the distribution of Y and specify its parameters.
(d) Are the random variables X and Y independent of each other? Justify your answer!

Answers

Answer: Joint probability density function:

f(x, y) = e^(-2x), x ≥ 0, -1 < y < x < ∞

(a) The marginal probability density function of random variable X is:

f(x) = ∫_(-1)^x e^(-2x) dy = e^(-2x) ∫_(-1)^x 1 dy = e^(-2x) (x + 1)

The marginal probability density function of random variable Y is:

f(y) = ∫_y^∞ e^(-2x) dx = e^(-2y)

(b) From the marginal probability density function of random variable X obtained in (a):

f(x) = e^(-2x) (x + 1)

The distribution of X is a Gamma distribution with parameters 2 and 3:

X = Gamma(2, 3)

(c) From the marginal probability density function of random variable Y obtained in (a):

f(y) = e^(-2y)

The distribution of Y is an exponential distribution with parameter 2:

Y = Exp(2)

(d) The joint probability density function of X and Y is given by:

f(x, y) = e^(-2x), x ≥ 0, -1 < y < x < ∞

The joint probability density function can be written as the product of marginal probability density functions:

f(x, y) = f(x) * f(y)

Therefore, random variables X and Y are independent of each other.

Learn more about probability

https://brainly.com/question/31828911

#SPJ11

An email was sent to university students asking them "Do you think this university should fund an ultimate frisbee team?" A small number of students reply. This sample of students that replied is unbiased. True or false? Select one: True False

Answers

False

The statement is false. The sample of students that replied to the email is not necessarily unbiased. Bias can arise in sampling when certain groups of individuals are more likely to respond than others, leading to a non-representative sample. In this case, the small number of students who chose to reply may not accurately represent the opinions of the entire university student population. Factors such as self-selection bias or non-response bias can influence the composition of the sample and introduce potential biases. To have an unbiased sample, efforts should be made to ensure random and representative sampling methods, which may help mitigate potential biases.

Learn more about sampling methods here:

https://brainly.com/question/12902833

#SPJ11

The two triangles below are similar.
What is the scale factor from triangle V to
triangle W?
Give your answer as an integer or as a
fraction in its simplest form.
7 cm
34°
59° 4 cm
V
87°
6 cm
12 cm
87°
59°
W
34°

Answers

The scale factor from triangle V to triangle W is 48/7, implying that the related side lengths in triangle W are 48/7 times the comparing side lengths in triangle V.

How to determine the scale factor from triangle V to triangle W

We can compare the side lengths of the two triangles to determine the scale factor from triangle V to triangle W.

In triangle V, the side lengths are:

The side lengths of the triangle W are as follows:

VW = 7 cm

VX = 4 cm

VY = 6 cm

WX = 12 cm;

WY =?

The side lengths of the triangles are proportional due to their similarity.

We can set up an extent utilizing the side lengths:

Adding the values: VX/VW = WY/WX

4/7 = WY/12

Cross-increasing:

4 x 12 x 48 x 7WY divided by 7 on both sides:

48/7 = WY

From triangle V to triangle W, the scale factor is 48/7.

Learn more about scale factor here:

https://brainly.com/question/10253650

#SPJ1

Below is the output of a valid regression model where Sales is a dependent variable and Radio promotions and TV promotions are independent variables.
Residual standard error: 33.75 on 18 degrees of freedom
Multiple R-squared: 0.5369, Adjusted R-squared: 0.4957
F-statistic: 4.511 on 7 and 18 DF, p-value: 0.004647
Which is the correct interpretation of 0.5369 of Multiple R-squared?
a.53.69 % of variations of Sales is explained by Radio promotions and TV promotions.
b.53.69 % of variations of Radio promotions is explained by Sales and TV promotions.
c.53.69 % of variations of TV promotions is explained by Sales and Radio promotions.
d.53.69 % of variations of Radio promotions and TV promotions is explained by Sales.

Answers

a. 53.69% of variations of Sales is explained by Radio promotions and TV promotions.

The multiple R-squared value of 0.5369 represents the proportion of the total variation in the dependent variable (Sales) that can be explained by the independent variables (Radio promotions and TV promotions). In other words, approximately 53.69% of the variations in Sales can be attributed to the combined effects of Radio promotions and TV promotions.

To know more about variables visit:

brainly.com/question/29583350

#SPJ11

a researcher obtained independent random samples of men from two different towns. she recorded the weights of the men. the results are summarized below: town a town b n 1

Answers

We do not have sufficient evidence to conclude that there is more variation in weights of men from town A than in weights of men from town B at the 0.05 significance level.

To test the claim that there is more variation in weights of men from town A than in weights of men from town B, we can perform an F-test for comparing variances. The null hypothesis (H₀) assumes equal variances, and the alternative hypothesis (Hₐ) assumes that the variance in town A is greater than the variance in town B.

The F-test statistic can be calculated using the sample standard deviations (s₁ and s₂) and sample sizes (n₁ and n₂) for each town. The formula for the F-test statistic is:

F = (s₁² / s₂²)

Substituting the given values, we have:

F = (29.8² / 26.1²)

Calculating this, we find:

F ≈ 1.246

To determine the critical value for the F-test, we need to know the degrees of freedom for both samples. For the numerator, the degrees of freedom is (n1 - 1) and for the denominator, it is (n₂ - 1).

Given n₁ = 41 and n₂ = 21, the degrees of freedom are (40, 20) respectively.

Using a significance level of 0.05, we can find the critical value from an F-distribution table or using statistical software. For the upper-tailed test, the critical value is approximately 2.28.

Since the calculated F-test statistic (1.246) is not greater than the critical value (2.28), we fail to reject the null hypothesis. Therefore, based on the given data, we do not have sufficient evidence to conclude that there is more variation in weights of men from town A than in weights of men from town B at the 0.05 significance level.

To know more about sufficient evidence click here :

https://brainly.com/question/32734531

#SPJ4

The question is incomplete the complete question is :

A researcher obtained independent random samples of men from two different towns. She recorded the weights of the men. The results are summarized below:

Town A

n1 = 41

x1 = 165.1 lb

s1 = 29.8 lb

Town B

n2 = 21

x2 = 159.5 lb

s2 = 26.1 lb

Use a 0.05 significance level to test the claim that there is more variation in weights of men from town A than in weights of men from town B.

If there are 60 swings in total and 1/3 is red and the rest are green how many of them are green

Answers

If there are 60 swings in total and 1/3 is red and the rest are green then there are 40 green swings.

If there are 60 swings in total and 1/3 of them are red, then we can calculate the number of red swings as:

1/3 x 60 = 20

That means the remaining swings must be green, which we can calculate by subtracting the number of red swings from the total number of swings:

60 - 20 = 40

So there are 40 green swings.

Learn more about green swings from

https://brainly.com/question/29117783

#SPJ11

2. Plot a direction field for each of the following differential equations along with a few on their integral curves. You may use dfield or any other direction (aka slope) field plotter, or Python. (a) y ′ =cos(t+y). (b) y ′ = 1+y 2 z​ .

Answers

To plot the direction field and integral curves for the given differential equations, we can use Python and its libraries like Matplotlib and NumPy. Let's consider the two equations =cos(t+y)We can define a function for this equation in Python, specifying the derivative with respect toy. Then, using the meshgrid function from NumPy, we can create a grid of points in the t−y plane. For each point on the grid, we evaluate the derivative and plot an arrow with the corresponding slope.

To plot integral curves, we need to solve the differential equation numerically. We can use a numerical integration method like Euler's method or a higher-order method like Runge-Kutta. By specifying initial conditions and stepping through the time variable, we can obtain points that trace out the integral curves. These points can be plotted on the direction field.Similarly, we define a function for this equation, specifying the derivative with respect toy, and  Then, we create a grid of points in the t−y plane and evaluate the derivative at each point to plot the direction field.To plot integral curves, we need to solve the system of differential equations numerically. We can use a method like the fourth-order Runge-Kutta method to obtain the points on the integral curves.Using Python and its plotting capabilities, we can visualize the direction field and plot a few integral curves for each of the given differential equations, gaining insights into their behavior in the

Leran more about differential equations here

https://brainly.com/question/32514740

#SPJ11

Find the value of the trigonometric ratio: tan z
z 37, x 35, y 12

Answers

The value of the trigonometric ratio tan(z) is approximately 0.342857.

We can use the tangent function to find the value of tan(z), given the lengths of the two sides adjacent and opposite to the angle z in a right triangle.

Since we are given the lengths of the sides x and y, we can use the Pythagorean theorem to find the length of the hypotenuse, which is opposite to the right angle:

h^2 = x^2 + y^2

h^2 = 35^2 + 12^2

h^2 = 1369

h = sqrt(1369)

h = 37 (rounded to the nearest integer)

Now that we know the lengths of all three sides of the right triangle, we can use the definition of the tangent function:

tan(z) = opposite/adjacent = y/x

tan(z) = 12/35 ≈ 0.342857

Therefore, the value of the trigonometric ratio tan(z) is approximately 0.342857.

Learn more about   value  from

https://brainly.com/question/24078844

#SPJ11

Arrange the following O(n2),O(2n),O(logn),O(nlogn),O(n2logn),O(n) Solution : Order of Growth Ranked from Best (Fastest) to Worst (Slowest) O(1)O(log2n)O(n)O(nlog2n)O(n2)O(n3)…O(nk)O(2n)O(n!) O(logn)

Answers

There are various time complexities of an algorithm represented by big O notations.

The time complexity of an algorithm refers to the amount of time it takes for an algorithm to solve a problem as the size of the input grows.

The big O notation is used to represent the worst-case time complexity of an algorithm.

It's a mathematical expression that specifies how quickly the running time increases with the size of the input. The following are some of the most prevalent time complexities and their big O notations:

O(1) - constant time

O(log n) - logarithmic time

O(n) - linear time

O(n log n) - linearithmic time

O(n2) - quadratic time

O(n3) - cubic time

O(2n) - exponential time

O(n!) - factorial time

Here are the time complexities given in the question ranked from best to worst:

O(logn)

O(n)

O(nlogn)

O(n2)

O(n2logn)

O(2n)

Hence, the correct order of growth ranked from best (fastest) to worst (slowest) is O(logn), O(n), O(nlogn), O(n2), O(n2logn), and O(2n).

In conclusion, there are various time complexities of an algorithm represented by big O notations.

To know more about algorithm, visit:

https://brainly.com/question/33344655

#SPJ11

In Python
The PDF (probability density function) of the standard normal distribution is given by:
(x)=(1/(√2))*^(-(x^2)/2)
Evaluate the normal probability density function at all values x∈{−3,−2,−1,0,1,2,3}x∈{−3,−2,−1,0,1,2,3} and print f(x) for each

Answers

In python, the probability density function (PDF) of the standard normal distribution is given by(x) = (1 / (√2)) * ^ (-(x ^ 2) / 2).[tex]0.24197072451914337f(0) = 0.39894228040.24197072451914337f(2) = 0.05399096651318806f(3) = 0.00443184841[/tex]

This is also known as the Gaussian distribution and is a continuous probability distribution. It is used in many fields to represent naturally occurring phenomena.Here is the code to evaluate the normal probability density function at all values of[tex]x∈{−3,−2,−1,0,1,2,3}x∈{−3,−2,−1,0,1,2,3}[/tex] and print f(x) for each.

[tex]4119380075f(-2) = 0.05399096651318806f(-1) = 0.24197072451914337f(0) = 0.3989422804[/tex]4119380075f(-2) = 0.05399096651318806f(-1) = [tex]0.24197072451914337f(0) = 0.39894228040.24197072451914337f(2) = 0.05399096651318806f(3) = 0.00443184841[/tex]19380075

This program will evaluate the normal probability density function at all values of [tex]x∈{−3,−2,−1,0,1,2,3}x∈{−3,−2,−1,0,1,2,3}[/tex]and print f(x) for each.

The output shows that the value of the function is highest at x = 0 and lowest at x = -3 and x = 3.

To know more about probability visit:

https://brainly.com/question/31828911

#SPJ11

Prove that there is no positive integer n that satisfies the
equation 2n + n5 = 3000. (Hint: Can you narrow down the
possibilities for n somehow?)

Answers

By considering the parity of the equation and the growth rate of the terms involved, we can conclude that there is no positive integer n that satisfies the equation 2n + n^5 = 3000.

To prove that there is no positive integer n that satisfies the equation 2n + n^5 = 3000, we can use the concept of narrowing down the possibilities for n.

First, we can observe that the left-hand side of the equation, 2n + n^5, is always an odd number since 2n is always even and n^5 is always odd for any positive integer n. On the other hand, the right-hand side of the equation, 3000, is an even number. Therefore, we can immediately conclude that there is no positive integer solution for n that satisfies the equation because an odd number cannot be equal to an even number.

To further support this conclusion, we can analyze the behavior of the equation as n increases. When n is small, the value of 2n dominates the equation, and as n gets larger, the contribution of n^5 becomes much more significant. Since 2n grows linearly and n^5 grows exponentially, there will come a point where the sum of 2n + n^5 exceeds 3000. This indicates that there is no positive integer solution for n that satisfies the equation.

Therefore, by considering the parity of the equation and the growth rate of the terms involved, we can conclude that there is no positive integer n that satisfies the equation 2n + n^5 = 3000.

Learn more about even number here:

brainly.com/question/4184435

#SPJ11

If A={1/n:n is natural number }. In the usual topological space, A2 = a. A b. ϕ c. R d. (O)

Answers

In the usual topological space, None of the given options (a, b, c, d) accurately represents A^2.

In the usual topological space, the notation A^2 refers to the set of all possible products of two elements, where each element is taken from the set A. Let's calculate A^2 for the given set A = {1/n: n is a natural number}.

A^2 = {a * b: a, b ∈ A}

Substituting the values of A into the equation, we have:

A^2 = {(1/n) * (1/m): n, m are natural numbers}

To simplify this expression, we can multiply the fractions:

A^2 = {1/(n*m): n, m are natural numbers}

Therefore, A^2 is the set of reciprocals of the product of two natural numbers.

Now, let's analyze the given options:

a) A^2 ≠ a, as a is a specific value, not a set.

b) A^2 ≠ ϕ (empty set), as A^2 contains elements.

c) A^2 ≠ R (the set of real numbers), as A^2 consists of specific values related to the product of natural numbers.

d) A^2 ≠ (O) (the empty set), as A^2 contains elements.

Therefore, none of the given options (a, b, c, d) accurately represents A^2.

Learn more about topological space here:-

https://brainly.com/question/32645200

#SPJ11

Find the exact value of each expressionfunctio
1. (a) sin ^−1(0.5)
(b) cos^−1(−1) 2. (a) tan^−1√3
​ b) sec ^-1(2)

Answers

The solutions of the given trigonometric functions or expressions are a) sin^-1 (0.5) = 30° and b) cos^-1 (-1) = 180° and a) tan^-1 (√3) = 60° and b) sec^-1 (2) = 60°

Here are the solutions of the given trigonometric functions or expressions;

1. a) sin^-1 (0.5)

To find the exact value of sin^-1 (0.5), we use the formula;

sin^-1 (x) = θ

Where sin θ = x

Applying the formula;

sin^-1 (0.5) = θ

Where sin θ = 0.5

In a right angle triangle, if we take one angle θ such that sin θ = 0.5, then the opposite side of that angle will be half of the hypotenuse.

Let us take the angle θ as 30°.

sin^-1 (0.5) = θ = 30°

So, the exact value of

sin^-1 (0.5) is 30°.

b) cos^-1 (-1)

To find the exact value of

cos^-1 (-1),

we use the formula;

cos^-1 (x) = θ

Where cos θ = x

Applying the formula;

cos^-1 (-1) = θ

Where cos θ = -1

In a right angle triangle, if we take one angle θ such that cos θ = -1, then that angle will be 180°.

cos^-1 (-1) = θ = 180°

So, the exact value of cos^-1 (-1) is 180°.

2. a) tan^-1√3

To find the exact value of tan^-1√3, we use the formula;

tan^-1 (x) = θ

Where tan θ = x

Applying the formula;

tan^-1 (√3) = θ

Where tan θ = √3

In a right angle triangle, if we take one angle θ such that tan θ = √3, then that angle will be 60°.

tan^-1 (√3) =

θ = 60°

So, the exact value of tan^-1 (√3) is 60°.

b) sec^-1 (2)

To find the exact value of sec^-1 (2),

we use the formula;

sec^-1 (x) = θ

Where sec θ = x

Applying the formula;

sec^-1 (2) = θ

Where sec θ = 2

In a right angle triangle, if we take one angle θ such that sec θ = 2, then the hypotenuse will be double of the adjacent side.

Let us take the angle θ as 60°.

Now,cos θ = 1/2

Hypotenuse = 2 × Adjacent side

= 2 × 1 = 2sec^-1 (2)

= θ = 60°

So, the exact value of sec^-1 (2) is 60°.

Hence, the solutions of the given trigonometric functions or expressions are;

a) sin^-1 (0.5) = 30°

b) cos^-1 (-1) = 180°

a) tan^-1 (√3) = 60°

b) sec^-1 (2) = 60°

To know more about trigonometric functions visit:

https://brainly.com/question/25618616

#SPJ11

Jared needs cupcakes for the bake sale. His friend Amy brings him 20 cupcakes. Jared can bake twenty four cupcakes every hour. His mom brings him 36 cupcakes she bought from Ingle's. If he needs 200 cupcakes to sell, how many hours will he need to bake?

Answers

Jared can bake 24 cupcakes per hour, he will need 144 / 24 = 6 hours to bake the remaining cupcakes.

Let's calculate how many cupcakes Jared has already:

- Amy brings him 20 cupcakes.

- His mom brings him 36 cupcakes.

So far, Jared has 20 + 36 = 56 cupcakes.

To reach his goal of 200 cupcakes, Jared needs an additional 200 - 56 = 144 cupcakes.

Jared can bake 24 cupcakes per hour.

To find out how many hours he needs to bake, we divide the number of remaining cupcakes by the number of cupcakes he can bake per hour:

Hours = (144 cupcakes) / (24 cupcakes/hour)

Hours = 6

Therefore, Jared will need to bake for 6 hours to reach his goal of 200 cupcakes.

To know more about cupcakes: https://brainly.com/question/30663087

#SPJ11

0.721 0.779 0.221
Use the Z Standard Normal probability distribution tables to obtain P(Z> -0.77) (NOTE MINUS SIGNI)
0.279

Answers

Rounding to three decimal places, we get:

P(Z > -0.77) ≈ 0.779

To obtain P(Z > -0.77) using Z Standard Normal probability distribution tables, we can look for the area under the standard normal curve to the right of -0.77 (since we want the probability that Z is greater than -0.77).

We find that the area to the left of -0.77 is 0.2206. Since the total area under the standard normal curve is 1, we can calculate the area to the right of -0.77 by subtracting the area to the left of -0.77 from 1:

P(Z > -0.77) = 1 - P(Z ≤ -0.77)

= 1 - 0.2206

= 0.7794

Rounding to three decimal places, we get:

P(Z > -0.77) ≈ 0.779

Learn more about decimal from

https://brainly.com/question/1827193

#SPJ11

V=x^(3)+7x^(2)+10x, where x is the height of the prism. Find linear factors with integer here the length is longer than the width.

Answers

To find the linear factors with integer, here the length is longer than the width. Using the formula,

`Volume = length × width × height` or

`V = l × w × h.

Given, the volume of a prism `V = x^3 + 7x^2 + 10x` where x is the height of the prism. To find the linear factors with integer, here the length is longer than the width. Using the formula, `Volume = length × width × height` or `V = l × w × h` For simplicity, we can assume that the width of the prism is 1 unit as the product of length and width is equal to 10, we can write `l × w = 10`

and `w = 1`.

Now, `V = l × w × h

= l × h

= x^3 + 7x^2 + 10x`

Or, `l × h = x^3 + 7x^2 + 10x`

As we know `l × w = 10`,

then `l = 10/w`

or `l = 10`.

So, we can write the equation `l × h = x^3 + 7x^2 + 10x`

as `10h = x^3 + 7x^2 + 10x`

Or, `10h = x(x^2 + 7x + 10)`

Or, `10h = x(x + 5)(x + 2)`

As the length is greater than the width, the value of x + 5 will be the length and the value of x + 2 will be the width. So, the linear factors with integer are (x + 5), (x + 2) and 10. The length of the prism is x + 5 and the width of the prism is x + 2. The volume of the prism is V = l × w × h = 10h.

To know more about integer visit:

https://brainly.com/question/490943

#SPJ11

What is nominal ordinal interval and ratio scale?

Answers

Nominal, ordinal, interval, and ratio scales are four levels of measurement used in statistics and research to classify variables.

Nominal Scale

The lowest level of measurement is known as the nominal scale. Without any consideration of numbers or numbers of any kind, it divides variables into different categories or groups. Data on this scale are qualitative and can only be classified and given names.

Ordinal Scale

In addition to the naming or categorizing offered by the nominal scale, the ordinal scale offers an ordering or ranking of categories. Although the variances between data points may not be constant or quantitative, their relative order or location is significant.

Interval Scale

The interval scale has the same characteristics as both nominal and ordinal scales, but it also includes equal distances between data points, making it possible to measure differences between them in a way that is meaningful. The distance or interval between any two consecutive data points on this scale is constant and measurable. It lacks a real zero point, though.

Ratio scale

The highest level of measuring is the ratio scale. It has a real zero point and all the characteristics of the nominal, ordinal, and interval scales. On this scale, ratios between the data points as well as differences between them can be measured.

These four scales form a hierarchy, with nominal being the least informative and ratio being the most informative.

Learn more about measurement in statistics here

https://brainly.com/question/30636635

#SPJ4

Given a Binomial distribution with n=5,p=0.3, and q=0.7 where p is the probability of success in each trial and q is the probability of failure in each trial. Based on these information, the expected

Answers

If a Binomial distribution with n = 5, p = 0.3, and q = 0.7 where p is the probability of success in each trial and q is the probability of failure in each trial, then the expected number of successes is 1.5.

A binomial distribution is used when the number of trials is fixed, each trial is independent, the probability of success is constant, and the probability of failure is constant.

To find the expected number of successes, follow these steps:

The formula to calculate the expected number of successes is n·p, where n is the number of trials and p is the number of successes.Substituting n=5 and p= 0.3 in the formula, we get the expected number of successes= np = 5 × 0.3 = 1.5

Therefore, the expected number of successes in the binomial distribution is 1.5.

Learn more about binomial distribution:

brainly.com/question/15246027

#SPJ11

In an exit poll, 61 of 85 men sampled supported a ballot initiative to raise the local sales tax to fund a new hospital. In the same poll, 64 of 77 women sampled supported the initiative. Compute the test statistic value for testing whether the proportions of men and women who support the initiative are different. −1.66 −1.63 −1.72 −1.69 −1.75

Answers

The two-sample z-test for proportions can be used to test the difference in the proportions of men and women supporting an initiative. The formula is Z = (p1-p2) / SED (Standard Error Difference), where p1 is the standard error, p2 is the standard error, and SED is the standard error. The pooled sample proportion is used as an estimate of the common proportion, and the Z-score is -1.405. Therefore, option A is the closest approximate test statistic value.

The test statistic value for testing whether the proportions of men and women who support the initiative are different is -1.66.Explanation:Given that n1 = 85, n2 = 77, x1 = 61, x2 = 64.A statistic is used to estimate a population parameter. As there are two independent samples, the two-sample z-test for proportions can be used to test whether the proportions of men and women who support the initiative are different.

Test statistic formula:  Z = (p1-p2) / SED (Standard Error Difference)where, p1 = x1/n1, p2 = x2/n2,

SED = √{ p1(1 - p1)/n1 + p2(1 - p2)/n2}

We can use the pooled sample proportion as an estimate of the common proportion.

The pooled sample proportion is:

Pp = (x1 + x2) / (n1 + n2)

= (61 + 64) / (85 + 77)

= 125 / 162

SED is calculated as:

SED = √{ p1(1 - p1)/n1 + p2(1 - p2)/n2}

= √{ [(61/85) * (24/85)]/85 + [(64/77) * (13/77)]/77}

= √{ 0.0444 + 0.0572}

= √0.1016

= 0.3186

Z-score is calculated as:

Z = (p1 - p2) / SED

= ((61/85) - (64/77)) / 0.3186

= (-0.0447) / 0.3186

= -1.405

Therefore, the test statistic value for testing whether the proportions of men and women who support the initiative are different is -1.405, rounded to two decimal places. Hence, option A -1.66 is the closest approximate test statistic value.

To know more about test statistic Visit:

https://brainly.com/question/31746962

#SPJ11

Can you give me the answer to this question

Answers

Assuming you are trying to solve for the variable "a," you should first multiply each side by 2 to cancel out the 2 in the denominator in 5/2. Your equation will then look like this:

(8a+2)/(2a-1) = 5

Then, you multiply both sides by (2a-1) to cancel out the (2a-1) in (8a+2)/(2a-1)

Your equation should then look like this:

8a+2 = 10a-5

Subtract 2 on both sides:

8a=10a-7

Subtract 10a on both sides:

-2a=-7

Finally, divide both sides by -2

a=[tex]\frac{7}{2}[/tex]

Hope this helped!

Determine if the string "baaba" is supported by the Context Free
Grammar shown below, by applying Cocke-Younger-Kasami (CYK)
algorithm.
S -> AB | BC
A -> BA | a
B -> CC | b
C -> AB | a

Answers

To determine if the string "baaba" is supported by the given Context-Free Grammar (CFG) using the Cocke-Younger-Kasami (CYK) algorithm, we need to perform: Create a table for CYK algorithm, Fill in the base cases, Fill in the remaining cells, Check if the start symbol is in the top-right cell.

Step 1: Create a table for CYK algorithm

Initialize a table with dimensions n x n, where n is the length of the input string.Each cell (i, j) represents the non-terminal symbols that generate the substring from position i to j in the input string.

Step 2: Fill in the base cases

For each cell (i, i), fill in the non-terminal symbols that generate the single character at position i in the input string.

Step 3: Fill in the remaining cells

For each cell (i, j), where i < j, iterate over all possible k values (i <= k < j) to split the substring into two parts.Check all production rules of the CFG to find non-terminal symbols that generate the two parts. If there is a production rule that matches, mark the corresponding non-terminal symbol in the cell.

Step 4: Check if the start symbol is in the top-right cell

If the start symbol S is present in the top-right cell (0, n-1) of the table, then the string is supported by the CFG. Otherwise, it is not supported.

Now, let's apply the CYK algorithm to determine if the string "baaba" is supported by the given CFG:

1: Create a table

  b  a  a  b  a

b

a

a

b

a

2:  Fill in the base cases

  b  a  a  b  a

b        B

a             A

a                  A

b

a

3:  Fill in the remaining cells

  b  a  a  b  a

b        B  S

a             A  B  S

a                  A  B  S

b

a

4: Check if the start symbol is in the top-right cell

Since the start symbol S is present in the top-right cell (0, 4) of the table, the string "baaba" is supported by the given CFG.

Therefore, the CYK algorithm confirms that the string "baaba" is supported by the provided CFG.

To learn more about CYK: https://brainly.com/question/33179161

#SPJ11

A sociologist found that in a sample of 45 retired men, the average number of jobs they had during their lifetimes was 7.3. The population standard deviation is 2.3

Find the 90% confidence interval of the mean number of jobs. Round intermediate and final answers to one decimal place

Find the 99% confidence interval of the mean number of jobs. Round intermediate and final answers to one decimal place.

Which is smaller? Explain why.

Answers

Confidence intervals refer to the likelihood of a parameter that falls between two sets of values. Confidence intervals are the values that we are confident that they contain the real population parameter with some level of confidence (usually 90%, 95%, or 99%).

Hence, a sociologist found that in a sample of 45 retired men, the average number of jobs they had during their lifetimes was 7.3, and the population standard deviation is 2.3. We are to find the 90% confidence interval of the mean number of jobs and the 99% confidence interval of the mean number of jobs.90% confidence interval of the mean number of jobs.

From the results of both the confidence intervals, the 99% confidence interval is larger than the 90% confidence interval. This result is because when the level of confidence is increased, the margin of error also increases, and this increase in margin of error leads to a larger confidence interval size.

To know more about parameter visit:

https://brainly.com/question/29911057

#SPJ11

Use the rational zeros theorem to list all possible rational h(x)=-5x^(4)-7x^(3)+5x^(2)+4x+7

Answers

The only rational root of h(x) is x = -1.The rational zeros theorem gives a good starting point, but it may not give all possible rational roots of a polynomial.

The given polynomial is h(x)=-5x^(4)-7x^(3)+5x^(2)+4x+7.

We need to use the rational zeros theorem to list all possible rational roots of the given polynomial.

The rational zeros theorem states that if a polynomial h(x) = a_nx^n + a_{n-1}x^{n-1} + ... + a_1x + a_0 has any rational roots, they must be of the form p/q where p is a factor of the constant term a_0 and q is a factor of the leading coefficient a_n.

First, we determine the possible rational zeros by listing all the factors of 7 and 5. The factors of 7 are ±1 and ±7, and the factors of 5 are ±1 and ±5.

We now determine the possible rational zeros of the polynomial h(x) by dividing each factor of 7 by each factor of 5. We get ±1/5, ±1, ±7/5, and ±7 as possible rational zeros.

We can now check which of these possible rational zeros is a root of the polynomial h(x)=-5x^(4)-7x^(3)+5x^(2)+4x+7.

To check whether p/q is a root of h(x), we substitute x = p/q into h(x) and check whether the result is zero.

Using synthetic division for the first possible root, -7/5, gives a remainder of -4082/3125. It is not zero.

Using synthetic division for the second possible root, -1, gives a remainder of 0.

Therefore, x = -1 is a rational root of h(x).

Using synthetic division for the third possible root, 1/5, gives a remainder of -32/3125.It is not zero.

Using synthetic division for the fourth possible root, 1, gives a remainder of -2.It is not zero.

Using synthetic division for the fifth possible root, 7/5, gives a remainder of -12768/3125.It is not zero.

Using synthetic division for the sixth possible root, -7, gives a remainder of 8.It is not zero.

Therefore, the only rational root of h(x) is x = -1.

To know more about rational root click here:

https://brainly.com/question/29551180

#SPJ11

23. Is it an SRS? A corporation employs 2000 male and 500 female engineers. A stratified random sumple of 200 male and 50 female engineers gives each engineer I chance in 10 to be chosen. This sample design gives every individual in the population the same chance to be chosen for the sample. Is it an SRS? Explain your answer. 25. High-speed Internet laying fiber-optic cable is expensive. Cable companics want to make sure that if they extend their lines out to less dense suburban or rural areas, there will be sufficient demand and the work will be costeffective. They decide to conduct a survey to deterumine the proportion of homsehokds in a rural subdivision that would buy the service. They select a simple tandom sample of 5 blocks in the subdivision and survey each family that lives on one of those blocks. (a) What is the name for this kind of sampling method? (b) Give a possible reason why the cable company chose this method.

Answers

23. A stratified random sample design was used instead of a simple random sample in the given scenario. It is not an SRS. This is because a simple random sample provides each individual in the population with an equal chance of being chosen for the sample.

But, in this case, different subgroups (males and females) of the population were divided before sampling. Instead of drawing samples randomly from the entire population, the sample was drawn separately from each stratum in a stratified random sample design. The sizes of these strata are proportional to their sizes in the population.

Therefore, a stratified random sample is not the same as a simple random sample.25.

(a) The sampling method used by the cable company is called Cluster Sampling.

b) Cable companies use cluster sampling method when the population being sampled is geographically large and scattered over a wide area. In such cases, surveying each member of the population can be difficult, time-consuming, and expensive. The companies divide the population into clusters, which are geographic groupings of the population. They then randomly select some of these clusters for inclusion in the survey. Finally, they collect data on all members of each selected cluster.

This method was chosen by the cable company because it is easier to contact respondents within the selected clusters and less costly than a simple random sample.

to know more about SRS

https://brainly.com/question/33625564

#SPJ11

State whether the expression is a polynor so, classify it as either a monomial, a bi or a trinomial. 6x (3)/(x)-x^(2)y -5a^(2)+3a 11a^(2)b^(3) (3)/(x) (10)/(3a^(2)) ,2a^(2)x-7a 5x^(2)y-8xy y^(2)-(y)/(

Answers

The given expression is a polynomial. It is a trinomial with terms consisting of various variables raised to different powers.

The given expression consists of multiple terms combined by addition and subtraction. To determine if it is a polynomial, we need to check if all the terms have variables raised to whole number powers and if the coefficients are constants.

1. Term 1: 6x(3)/(x) is a monomial since it consists of a single term with x raised to a power.

2. Term 2: -x^(2)y is a binomial since it consists of two variables, x and y, raised to different powers.

3. Term 3: -5a^(2)+3a is a binomial with two terms involving the variable a.

4. Term 4: 11a^(2)b^(3)/(3)/(x) is a monomial with variables a and b raised to different powers.

5. Term 5: (10)/(3a^(2)) is a monomial with a variable raised to a negative power.

6. Term 6: 2a^(2)x-7a is a binomial with two terms involving the variables a and x.

7. Term 7: 5x^(2)y-8xy is a binomial with two terms involving the variables x and y.

8. Term 8: y^(2)-(y) is a binomial with two terms involving the variable y.

Learn more about polynomial : brainly.com/question/11536910

#SPJ11

Use a sum or difference formula to find the exact value of the following. sin(140 ∘
)cos(20 ∘
)−cos(140 ∘
)sin(20 ∘
)

Answers

substituting sin(60°) into the equation: sin(60°) = sin(40°)cos(20°) + cos(40°)sin(20°)  This gives us the exact value of the expression as sin(60°).

We can use the difference-of-angles formula for sine to find the exact value of the given expression:

sin(A - B) = sin(A)cos(B) - cos(A)sin(B)

In this case, let A = 140° and B = 20°. Substituting the values into the formula, we have:

sin(140° - 20°) = sin(140°)cos(20°) - cos(140°)sin(20°)

Now we need to find the values of sin(140°) and cos(140°).

To find sin(140°), we can use the sine of a supplementary angle: sin(140°) = sin(180° - 140°) = sin(40°).

To find cos(140°), we can use the cosine of a supplementary angle: cos(140°) = -cos(180° - 140°) = -cos(40°).

Now we substitute these values back into the equation:

sin(140° - 20°) = sin(40°)cos(20°) - (-cos(40°))sin(20°)

Simplifying further:

sin(120°) = sin(40°)cos(20°) + cos(40°)sin(20°)

Now we use the sine of a complementary angle: sin(120°) = sin(180° - 120°) = sin(60°).

Finally, substituting sin(60°) into the equation:

sin(60°) = sin(40°)cos(20°) + cos(40°)sin(20°)

This gives us the exact value of the expression as sin(60°).

Know more about supplementary angle here:

https://brainly.com/question/18362240

#SPJ11

You have $96 to spend on campground activites. You can rent a paddleboat for $8 per hour and a kayak for $6 per hour. Write an equation in standard form that models the possible hourly combinations of activities you can afford and then list three possible combinations.

Answers

Three possible hourly combinations of activities are:(0, 16), (8, 12) and (16, 8). Let the number of hours for renting paddleboat be represented by 'x' and the number of hours for renting kayak be represented by 'y'.

Here, it is given that you have $96 to spend on campground activities. It means that you can spend at most $96 for these activities. And it is also given that renting a paddleboat costs $8 per hour and renting a kayak costs $6 per hour. Now, we need to write an equation in standard form that models the possible hourly combinations of activities you can afford.

The equation in standard form can be written as: 8x + 6y ≤ 96

To list three possible combinations, we need to take some values of x and y that satisfies the above inequality. One possible way is to take x = 0 and y = 16.

This satisfies the inequality as follows: 8(0) + 6(16) = 96

Another way is to take x = 8 and y = 12.

This satisfies the inequality as follows: 8(8) + 6(12) = 96

Similarly, we can take x = 16 and y = 8.

This also satisfies the inequality as follows: 8(16) + 6(8) = 96

Therefore, three possible hourly combinations of activities are:(0, 16), (8, 12) and (16, 8).

To know more about hours visit :

https://brainly.com/question/13349617

#SPJ11

Consider the sequence (an) given by a1 = 1. a2 = 2, an+1= 1/2(an+an-1) for n > 2.
We will show that this sequence is Cauchy.
(a)Show that for all n∈ N, |an+1-an|≤ 1 /2n-1
(b) Use part (a) to show that (an) is Cauchy.
Hint: Recall that knowing part (a) is true is not enough on its own since you need to show that |am-an| can be made arbitrarily small for any pair of terms am and an, not just consecutive terms. Try starting with |an+k-an| (where k ∈N is arbitrary) and see if you can rewrite this in a way that allows you to use what you learnt in part (a).
[Note: in this question you are asked to show this sequence is Cauchy directly from the definition, not using the Cauchy Criterion.]

Answers

we have shown that for any ε > 0, there exists N ∈ N such that for all m, n ≥ N, |am - an| < ε. This satisfies the definition of a Cauchy sequence.

(a) To show that for all n ∈ N, |an+1 - an| ≤ 1/2^(n-1), we can use mathematical induction.

Base Case (n = 1):

|a2 - a1| = |2 - 1| = 1 ≤ 1/2^(1-1) = 1.

Inductive Step:

Assume that for some k ∈ N, |ak+1 - ak| ≤ 1/2^(k-1). We need to show that |ak+2 - ak+1| ≤ 1/2^k.

Using the recursive formula, we have:

ak+2 = 1/2(ak+1 + ak)

Substituting this into |ak+2 - ak+1|, we get:

|ak+2 - ak+1| = |1/2(ak+1 + ak) - ak+1| = |1/2(ak+1 - ak)| = 1/2 |ak+1 - ak|

Since |ak+1 - ak| ≤ 1/2^(k-1) (by the inductive hypothesis), we have:

|ak+2 - ak+1| = 1/2 |ak+1 - ak| ≤ 1/2 * 1/2^(k-1) = 1/2^k.

Therefore, by mathematical induction, we have shown that for all n ∈ N, |an+1 - an| ≤ 1/2^(n-1).

(b) To show that (an) is Cauchy, we need to show that for any ε > 0, there exists N ∈ N such that for all m, n ≥ N, |am - an| < ε.

Let ε > 0 be given. By part (a), we know that |an+k - an| ≤ 1/2^(k-1) for all n, k ∈ N.

Choose N such that 1/2^(N-1) < ε. Then, for all m, n ≥ N and k = |m - n|, we have:

|am - an| = |am - am+k+k - an| ≤ |am - am+k| + |am+k - an| ≤ 1/2^(m-1) + 1/2^(k-1) < ε/2 + ε/2 = ε.

Learn more about Cauchy sequence here :-

https://brainly.com/question/13160867

#SPJ11

Other Questions
Determine if the string "baaba" is supported by the Context FreeGrammar shown below, by applying Cocke-Younger-Kasami (CYK)algorithm.S -> AB | BCA -> BA | aB -> CC | bC -> AB | a Discuss a new concepts that you have learned in this class and how they will be helpful in the workplace.Expert Answer PLS HELPPPPPPPPPPPPState a theme of the poem Borderbus. Cite evidence from the poem to support that theme. here is the story A dnde vamos where are we goingSpeak in English or the guard is going to comeA dnde vamos where are we goingSpeak in English or the guard is gonna get us hermanaPero qu hicimos but what did we doSpeak in English come onNoms s unas pocas palabras I just know a few wordsYou better figure it out hermana the guard is right thereSee the bus driverTantos das y ni sabamos para donde bamosSo many days and we didn't even know where we were headedI know where we're goingWhere we always goTo some detention center to some fingerprinting hall or cubeSome warehouse warehouse after warehousePero ya nos investigaron ya cruzamos ya nos cacharonLos federales del bordo qu ms quierenBut they already questioned us we already crossed over theyalready grabbed us the Border Patrol what more do they wantWe are on the bus nowthat is allA dnde vamos te digo sal desde HondurasNo hemos comido nada y dnde vamos a dormirWhere are we going I am telling you I came from HondurasWe havent eaten anything and where are we going to sleepI dont want to talk about it just tell themThat you came from nowhereI came from nowhereAnd we crossed the border from nowhereAnd now you and me and everybody else here isOn a bus to nowehere you got it?Pero por eso nos venimos para salir de la nadaBut thats why we came to leave all that nothing behindWhen the bus stops there will be more nothingWere here hermanaY esas gentes quines sonno quieren que siga el caminNo quieren que sigamosEstn bloqueando el busA dnde vamos ahoraThose people there who are theythey don't want the bus to keep goingthey don't want us to keep goingnow they are blocking the busso where do we goWhat?He tardado 47 das para llegar ac no fue fcil hermana45 das desde Honduras con los coyotes los que se buenoya sabes lo que les hicieron a las chicas all mero en frentede nosotros pero qu bamos a hacer y los trenes los trenescmo dir hermana cientos denosotros como gallinas como topos en jaulas y verduraspudriendse en los trenes de miles me oyes de miles y se resbalabande los techos y los desiertos de Arizona de Tajas sed y hambresed y hambre dos cosas sed y hambre da tras da hermanay ahora aqu en este camin y quin sabe a dndevamos hermana fijate vengo desde Brownsville dnde nos amarrarony ahora en California pero todava no entramos y todava el bordoest por delanteIt took me 47 days to get here it wasn't easy hermana45 days from Honduras with the coyotes the ones that wellyou know what they did to las chicasright there in front of us so what were we supposedto do and the trains the trains how can I tell you hermana hundredsof us like chickens like gophers in cages and vegetablesrotting on trains of thousands you hear me of thousands and they slidfrom the rooftops and the deserts of Arizona and Texas thirst and hungerthirst and hunger two things thirst and hunger day after day hermanaand now here on this bus of who-knows-where we are goinghermana listen I come from Brownsville where they tied us upand now in California but still we're not inside and still the borderlies ahead of usI told you to speak in English even un poquitothe guard is going to think we are doing somethingpeople are screaming outsidethey want to push the bus backPero para dnde le damos hermanapor eso me vinele quebraron las piernas a mi padrelas pandillas mataron a mi hijosolo quiero que estemos juntostantos aos hermanaseparadosBut where do we go hermanathat's why I came herethey broke my father's legsgangs killed my sonI just want us to be togetherso many years hermanapulled apartWhat?Mi madre me dijo que lo ms importantees la libertad la bondad y la buenas accionescon el prjimoMy mother told me that the most important thingis freedom kindness and doing goodfor othersWhat are you talking about?I told you to be quietLa libertad viene desde muy adentroall reside todo el dolor de todo el mundoel momento en que purguemos ese dolor de nuestras entraasseremos libres y en ese momento tenemos quellenarnos de todo el dolor de todos los serespara liberarlos a ellos mismosFreedom comes from deep insideall the pain of the world lives therethe second we cleanse that pain from our gutswe shall be free and in that moment we have tofill ourselves up with all the pain of all beingsto free them all of themThe guard is coming well now what maybe they'll take usto another detention center we'll eat well have a floora blanket toilets water and each otherfor a whileNo somos nada y venimos de la nadapero esa nada lo es todo si la nutres de amorpor eso venceremosWe are nothing and we come from nothingbut that nothing is everything, if you feed it with lovethat is why we will triumphWe are everything hermanaBecause we come from everything what is the typical wind directionin North Carolina after the passage of a warm front?a. southwesterlyb. northeasterlyc. northwesterly aging of receivables schedule july 31 customer balance not past due 1-30 days past due 31-60 days past due 61-90 days past due over 90 days past due subtotals 1,050,000 600,000 220,000 115,000 85,000 30,000 boyd industries 36,000 36,000 hodges company 11,500 11,500 kent creek inc. 6,600 6,600 lockwood company 7,400 7,400 van epps company 13,000 13,000 totals 1,124,500 607,400 233,000 121,600 96,500 66,000 percentage uncollectible 1% 3% 12% 30% 75% allowance for doubtful accounts 106,106 6,074 6,990 14,592 28,950 49,500 assume that the allowance for doubtful accounts for evers industries has a credit balance of $8,240 before adjustment on july 31. journalize the adjusting entry for uncollectible accounts as of july 31. if an amount box does not require an entry, leave it blank. july 31 bad debt expense bad debt expense bad debt expense 0 allowance for doubtful accounts allowance for doubtful accounts 0 allowance for doubtful accounts feedback area a researcher obtained independent random samples of men from two different towns. she recorded the weights of the men. the results are summarized below: town a town b n 1 one of dean's premises this week is that while most of us think about leadership as a title, we can actually lead without the formal authority of being the boss, the manager, or the founder of the business. which two words describes this? one of dean's premises this week is that while most of us think about leadership as a title, we can actually lead without the formal authority of being the boss, the manager, or the founder of the business. which two words describes this? paid vs volunteer structural vs relational titled vs assumed ellupro, a company that desigrhed and manufactured cell phones, had a unique design to their procucts and a particular celar for their hones and packaging. This design and color is known as Maltiple Choice a service mark trade dresis. a fanciful markic. trade style. when it comes to treating bulimia nervosa, research suggests that group format therapies help as many as _____ percent of clients stop the cycle of binge eating and purging. a pair of blue jeans is best associated with which cultural subsystem? how many carbon atoms react in this equation? 2c4h10 13o2-> 8co2 10h20 a new technique to replace diseased organs is harvesting stem cells from the patient's own body and using them to grow a new organ that is then transplanted into the body. in this case: State whether the expression is a polynor so, classify it as either a monomial, a bi or a trinomial. 6x (3)/(x)-x^(2)y -5a^(2)+3a 11a^(2)b^(3) (3)/(x) (10)/(3a^(2)) ,2a^(2)x-7a 5x^(2)y-8xy y^(2)-(y)/( in a speech about the global economy, rachel starts with a story about a local grocery store. she is establishing _______. how your own health beliefs impact the management of one of yourpersonal life stressors. How can the Health Belief Model provideany new insights? What are the definitions of the following words1. Data hierarchy2. Traditional File Environment3. Access Methods4. File-based ApproachQuestion 2What are the Disadvantages of using the DBMS approach over the Traditional File System? V=x^(3)+7x^(2)+10x, where x is the height of the prism. Find linear factors with integer here the length is longer than the width. Sansa's fighter pilot squadron is being deployed to Iraq for five months. She is a ________ type of border dweller.1. voluntary short-term2. voluntary long-term3. involuntary short-term4. involuntary long-term What is the music instrument in Cordillera?. Draw one planar structure each for the following compounds using dashed or solid wedges to show the stereochemistry of the substituent groups. To be graded properly, include the hydrogen atoms on the chirality centers (asymmetric carbons).cis-1,3-dimethylcyclohexane and trans-1,3-dimethylcyclohexane