Answer:
oxidation-reduction or redox reaction
Explanation:
n
Which compound is formed from its elements by an
exothermic reaction at 298 K and 101.3 kPa?
Answer:
H2O(g) (negative)
Explanation:
Prepare 800 mL of 2M sodium chloride. How many grams of NaCl needs to be dissolve in a 800 mL distilled water?
Answer:
93.6 g of NaCl.
Explanation:
We'll begin by converting 800 mL to litre (L). This can be obtained as follow:
1000 mL = 1 L
Therefore,
800 mL = 800 mL × 1 L / 1000 mL
800 mL = 0.8 L
Next, we shall determine the number of mole of NaCl in the solution. This can be obtained as follow:
Molarity = 2 M
Volume = 0.8 L
Mole of NaCl =?
Molarity = mole / Volume
2 = mole of NaCl / 0.8
Cross multiply
Mole of NaCl = 2 × 0.8
Mole of NaCl = 1.6 moles
Finally, we shall determine the mass of NaCl needed to prepare the solution. This can be obtained as follow:
Mole of NaCl = 1.6 moles
Molar mass of NaCl = 23 + 35.5
= 58.5 g/mol
Mass of NaCl =?
Mole = mass /Molar mass
1.6 = Mass of NaCl / 58.5
Cross multiply
Mass of NaCl = 1.6 × 58.5
Mass of NaCl = 93.6 g
Therefore, 93.6 g of NaCl is needed.
93,6 grams of NaCl is needed to prepare a 800ml of 2M sodium chloride.
Molar concentrationIn a 2M solution, there are 2 moles of the substance per 1 liter, that is, in 800 ml we have:
[tex]\frac{2 mol}{x mol} =\frac{1000 ml}{800ml}[/tex]
[tex]x = 1.6 mol[/tex]
Thus, 1.6 mol of NaCl is needed to prepare the solution.
Mass calculationTo calculate the mass in an amount of moles, we use the molar mass, so that:
[tex]MM_{NaCl}= 58.5g/mol[/tex]
[tex]m = MM \times mol[/tex]
[tex]m = 58.5 \times 1.6[/tex]
[tex]m = 93.6g[/tex]
So, 93,6 grams of NaCl is needed to prepare a 800ml of 2M sodium chloride.
Learn more about mole calculation in: brainly.com/question/2845237
Select all of the ways collection areas use to gain water. precipitation falls direction into the collection area runoff from precipitation water evaporates from the collection area
"Precipitation falls direction into the collection area" and "runoff from precipitation" are the correct ways.
Ways of collecting waterThe ways such as "Precipitation falls direction into the collection area" and "runoff from precipitation" through which collection areas use to gain water because these two activities bring water to the collection areas
While on the other hand, "water evaporates from the collection area" is the activity which removes water from the collection area so we can conclude that "Precipitation falls direction into the collection area" and "runoff from precipitation" are the correct ways.
Learn more about precipitation here: https://brainly.com/question/866725
helppp nowwww plsss
Answer:
The answer is number 2.
Explanation:
Perform the following conversions. Show your work and give answer in scientific
notation with correct units.
4.390 m → dm
4.39 x 10^1 dm
we need to change the m to dm first then make it in scientifiv notation
How has the human population changed during the past 50 years
Answer:
The human population has increased by the billions, and we have been creating better and more complex technology over the years. So, overall there is a difference between now and 50 years ago.
Which of the following correctly describes molecules of two different gases if they are at the same temperature and pressure?
CA. They must have the same mass.
CB. They must have the same velocity
CC. They must have the same average kinetic energy
CD. They must have the same average potential energy
Answer: C. They must have the same average kinetic energy.
Explanation: I got it right
How many grams of ethanedioic acid is required to prepare 2M solution of the NaOH
Answer:
I don't know
Explanation:
kahit Hindi ko alam
Why water is able to stick to the side of a glass
Answer:
Water uses adhesive forces that allow it to stick to certain surfaces such as glass.
Explanation:
When the angle between vertical direction and the glass wall is small, surface tension is stronger and the component of gravity perpendicular to the glass wall is small. The result of this causes water to stick to the side of a glass.
Hope this helps!
When a real gas is placed into a container at high pressure, why might the pressure of the gas be higher than what was predicted by the ideal gas law?
Answer:The correct answer is A.
Explanation:Properties of ideal gases have different volumes under very high pressure. These gases take up additional volume when there is high pressure exerted, and the predicted volume of these gases will end up being smaller than the actual values of the gas volumes. Therefore, the true volume of the gases will be higher than the low ones that were predicted, giving your answer A.
What must be satisfied for a hypothesis to be useful?
A. It must be theoretical.
B. It must be observable.
C. It must be based on scientific law.
D. It must be testable.
Convert 2.345 centimeters cubed to inches cubed. 1inch = 2.54cm
Answer:
0.92322835
Explanation:
0.92322835 rounded= 0.9 or 0.92
2.345 centimeters cubed is equal to 0.1431 inches cubed.
Units of volume are used to measure the amount of space occupied by an object or substance. Volume is a three-dimensional quantity and is typically expressed in cubic units. Some common units of volume include:
Cubic Meter (m³): This is the SI unit of volume and represents the volume of a cube with sides measuring one meter.Cubic Centimeter (cm³): This is a smaller unit of volume often used for measuring the volume of small objects or substances. It is equal to the volume of a cube with sides measuring one centimeter.Liter (L): The liter is a commonly used unit of volume in everyday life. It is equal to one cubic decimeter or 1,000 cubic centimeters.Milliliter (mL): The milliliter is a smaller unit of volume often used for measuring liquids or small quantities. It is equal to one-thousandth of a liter or one cubic centimeter.Other units of volume, such as gallons, cubic feet, and ounces, are also used in specific contexts or regions. It is important to use appropriate conversion factors when converting between different units of volume.
1 inch = 2.54 cm.
1 cm = 1/2.54 inches
(1 cm)³ = (1/2.54 inches)³
1 cm³ = (1/2.54)³ inches³
2.345 cm³ = 2.345 × [(1/2.54)³] inches³
2.345 cm³ ≈ 0.1431 inches³ (rounded to four decimal places)
Learn more about Units of volume, here:
https://brainly.com/question/8101354
#SPJ2
Please help!!!!!!!!
Alyssa has four different subjects oil water sand and air. she would like to fill four Identical balloons with these materials until all of the balloons have the same mass. Which balloon would take up the most space
Answer:
air
Explanation:
The material that will take up the most space is air. Air and most gases have no definite volume.
They simply take up shape and volume of any medium they are introduced into.
The attribute of no fixed shape and volume sets gases apart from other matter. The air will fill the entire space of the balloon and it will have the most volume. Oil, water and sand have fixed volume that is predetermined.Answer:
Air
Explanation:
The material that will take up the most space is air. Air and most gases have no definite volume.
They simply take up shape and volume of any medium they are introduced into.
The attribute of no fixed shape and volume sets gases apart from other matter.
The air will fill the entire space of the balloon and it will have the most volume.
Oil, water and sand have fixed volume that is predetermined.
How many moles are in 4.85 x 10^25 atoms of carbon?
Answer:
4.85 x 10^25
Explanation:
thats what i was told by a calculator
How many moles are there in 36.0 grams of water?
Answer:
There are 4 moles of hydrogen atoms in 36 grams of water,
Explanation:
How many grams are in 2.2 moles of sodium hydroxide (NaOH)?
Answer:
1 mole is equal to 1 moles NaOH, or 39.99711 grams.
(( hoped this helped ))
Answer:
1 mole is equal to 1 moles Sodium Hydroxide, or 39.99711 grams. Note that rounding errors may occur, so always check the results.
How many grams of aluminum in required to produce 17.5 g of hydrogen
Mass of Aluminum = 157.5 g
Further explanationGiven
17.5 g of Hydrogen
Required
Mass of Aluminum
Solution
Reaction
2Al + 3H₂SO₄ → Al₂(SO₄)₃ + 3H₂
mol Hydrogen :
= mass : molar mass
= 17.5 g : 2 g/mol
= 8.75
From the equation, mol Al :
= 2/3 x mol H₂
= 2/3 x 8.75
= 5.83
Mass Al :
= 5.83 x 27 g/mol
= 157.5 g
convert 2.39 x 1022 molecules of water into moles of water
Answer:
[tex]0.0397\ \text{mol}[/tex]
Explanation:
Number of molecules of water = [tex]2.39\times 10^{22}[/tex]
[tex]N_A[/tex] = Avogadro's number = [tex]6.022\times 10^{23}\ \text{mol}^{-1}[/tex]
Number of moles is given by
[tex]\dfrac{2.39\times 10^{22}}{6.022\times 10^{23}}[/tex]
[tex]=0.0397\ \text{mol}[/tex]
The number of moles of water is [tex]0.0397\ \text{mol}[/tex].
5. As a sample of matter is heated, its particles *
O A are unaffected
O B. move more quickly
O C. move more slowly
D. stop moving
Answer:
B. move more quickly
Explanation:
As a sample of matter is heated, we know that the particles begins to move more quickly.
This is because the temperature of a substance is directly proportional to the average kinetic energy of a system.
As the temperature increases, the body gains more kinetic energyThis is translated to the particles of the medium. Then they begin to move quickly and very fast enough.Given the Punnett Square above, with Y=dominant yellow allele and y= recessive green allele, what is the probability of an offspring plant having a green phenotype?
Question 5 options:
25% green phenotype
50% green phenotype
75% green phenotype
100% green phenotype
Answer:
50 percent
Explanation:
Considering one heterozygous parent and a homo-zygous recessive parent, the probability of an offspring plant having a green (recessive) phenotype is 50 percent (50%).
What is a Punnett square?A Punnet square is a diagram used to represent the gametic combination that will give rise to a given genotype/phenotype.
In this case, one parent is heterozygous (genotype Yy, carrier of the recessive allele), whereas the other parent is recessive homo-zygous (genotype yy).Here, the Punnett square is equal to:Y y
y 1/4 Yy 1/4 yy
y 1/4 Yy 1/4 yy
In conclusion, considering one heterozygous parent and a homo-zygous recessive parent, the probability of an offspring plant having a green (recessive) phenotype is 50 percent (50%).
Learn more in:
https://brainly.com/question/3522181
Water in the atmosphers is in its gas form and is called water vapor. Where does most of the water vapor in the atmosphere
evaporate from?
Answer:
Water vapor can be produced from the evaporation or boiling of liquid water or from the sublimation of ice. Water vapor is transparent, like most constituents of the atmosphere. Under typical atmospheric conditions, water vapor is continuously generated by evaporation and removed by condensation.
20 POINTS! SAVE ME PLS!
Which ion below is fluorine most like to form? A) F+1 B) F+2 C) F-1 D) F-2
Scientists currently use radioactive isotopes in various field. Some radioactive isotopes are used to _____.
•power iasers
•develop new antibiotics
•clone organisms
•date ancient bones
[tex]\huge{\textbf{\textsf{{\color{pink}{An}}{\red{sw}}{\orange{er}} {\color{yellow}{:}}}}}[/tex]
ur answer is:-
date ancient bones
Scientists currently use radioactive isotopes in various field. Some radioactive isotopes are used to date ancient bones.
What are isotopes?Isotopes are defined as substances having same number of protons but different number of neutrons.Number of protons is characteristic for determining position of elements in the periodic table.
Since,all isotopes have the same number of protons and hence have same position.They have similar chemical properties as they have same number of electrons.
They find applications in the field of nuclear medicine and oil and gas research . There are 2 types of isotopes : stable and unstable
Unstable isotopes are radioactive and are called as radioisotopes.Some of these isotopes are man -made and hence also called as artificial isotopes.Every element has an isotope which is either man-made or natural .
Many properties of isotopes depend on mass which is measured in atomic mass unit. The difference in actual mass and mass number is called mass defect.
Learn more about isotopes,here:
https://brainly.com/question/21536220
#SPJ6
Convert 4.56 g/ml to lb-fl-oz
Answer:
g-lb 0.01005308
ml-fl Oz 0.1541919
The value of 4.56 g/mL is 0.296 lb/fl-oz.
Explanation:
Given:
The density with 4.56 g/mL
To find:
Convert 4.56 g/ml to lb/fl-oz
Solution:
In 1 pound there are 453.592 grams:
[tex]1 pound = 453.592 grams\\1 grams=\frac{1}{453.592 } pounds\\4.56 g/mL=4.56\times\frac{1}{ 453.592} lb/mL\\=0.0100 lb/mL[/tex]
In 1 fluid ounce there are 29.5735 milliliters:
[tex]1 \text{fluid ounce} = 29.5735 milliliter\\1 mL=\frac{1}{29.5735} fl-oz\\0.0100 lb/mL=\frac{0.0100}{\frac{1}{29.5735}} lb/fl-oz\\0.0100 lb/mL=0.0100 \times\frac{29.5735}{1} lb/fl-oz\\=0.296 lb/fl-oz[/tex]
The value of 4.56 g/mL is 0.296 lb/fl-oz.
Learn more about conversions here:
brainly.com/question/17743460
brainly.com/question/24530464
How many grams are contained in 19.7 moles of Copper (III) Hydroxide?
Answer:
1912.1893280000002 or rounded to the nearest tenth is, 1912.19
Explanation:
4. How many Carbon atoms are present in 1.00 mole of methane, CH,?
6.02 x 1025
o
3.01 x 1023
0
6.02 x 1023
o
O
12.04 x 1023
0
Answer: 6.02*10^23
Explanation:
1 mole of anything is 6.02*10^23
1 atom C per CH4
The analysis of data leads to _____.
A. theories
B. variables
C. hypotheses
D. conclusions
Answer: D, Conclusions
Explanation: Gradpoint
2H2O = 2H2 +O2
If 30mL of hydrogen are produced in above reaction, how many mL of oxygen are produced? Please show work.
Answer:
15 mL of O₂.
Explanation:
The balanced equation for the reaction is given below:
2H₂O —> 2H₂ + O₂
From the balanced equation above,
2 mL of H₂O reacted to produce 2 mL of H₂ and 1 mL of O₂.
Next, we shall determine the volume of H₂O needed to produce 30 mL of H₂. This can be obtained as follow:
From the balanced equation above,
2 mL of H₂O reacted to produce 2 mL of H₂.
Therefore, 30 mL of H₂O will also react to produce 30 mL of H₂.
Thus, 30 mL of H₂O is needed for the reaction.
Finally, we shall determine the volume of O₂ produced from the reaction. This can be obtained as follow:
From the balanced equation above,
2 mL of H₂O reacted to produce 1 mL of O₂.
Therefore, 30 mL of H₂O will react to produce = (30 × 1)/2 = 30/2 = 15 mL of O₂.
Thus, 15 mL of O₂ were produced from the reaction.
starting with the idea of isostasy and ending with plate tectonics, explain how scientists understanding of the earth's crust has changed
Plate Tectonics is the study of the movement and changes in the rocks that make up the earth's crust. Isostasy is the equilibrium in the earth's crust maintained by a flow of rock material in the asthenosphere.
The concept behind pre-continental drift was that in addition to the pressure of contraction, isostatic adjustments also caused the crust's heavier portions to sink and its lighter portions to rise. It was believed that the Earth's interior was a viscous fluid that could support this rising and sinking.Wegener put up the theory that continents can move in 1915 based on fossil data, how coasts appeared to fit together, and other traits, but it was not well received at the time.He noticed that rock ages, and mountain belts match up across the boundaries of continents if you put the continents back together as the "jigsaw puzzle fit" proposes.On continents that are currently divided by water, fossils of identical terrestrial flora and animals have been discovered.New data from the ocean floor, including topography and rock magnetism, played a major role in the development of plate tectonic theory in the 1960s.On the basis of symmetrical patterns, seafloor spreading was hypothesized as a mechanism to propel the migration of the continents.Hence this led to scientists understanding of the earth's crust has changed.
learn more about Plate tectonics here: https://brainly.com/question/2325633
#SPJ10
Question Determine the concentration of hydroxide ions for a 25 °C solution with a pH of 8.22. . Your answer should contain 2 significant figures.
Answer:
[tex][OH^-]=1.7x10^{-6}M[/tex]
Explanation:
Hello!
In this case, since the pOH of a solution can be computed when knowing the pH as shown below:
[tex]pH+pOH=14\\\\pOH=14-8.22=5.78[/tex]
And therefore, the concentration of hydroxide ions based on the definition of pH:
[tex][OH^-]=10^{-pOH}[/tex]
In such a way, we obtain:
[tex][OH^-]=10^{-5.78}=1.7x10^{-6}M[/tex]
Best regards