A student sets up the following equation to convert a measurement. (The ? stands for a number the student is going to calculate.) Fill in the missing part of this equation.
Answers
Answer:
1 cm/s
Explanation:
From the question given above,
the student is trying to convert 0.010 m/s to a number in cm/s.
Thus, we can convert 0.010 m/s to cm/s as illustrated below:
Recall:
1 m/s = 100 cm/s
Therefore,
0.010 m/s = 0.010 m/s × 100 cm/s ÷ 1 m/s
0.010 m/s = 1 cm/s
Therefore, 0.010 m/s is equivalent to 1 cm/s
Related Questions
what are thermosetting plastics???
Answers
Explanation:
Thermosetting plastic are made up of long chain of molecules which are cross-linked and can be moulded into different shape and size.
Answer:
Hey!
THERMOSETTING PLASTICS are plastics or polymers that become IRREVESIBLY SET/RIGID when it has been heated and cooled...
Explanation:
This means that if you heat up a thermosetting plastic, you only have one chance to mould it or shape it before it cools down...if not you cannot correct this and will have to start again! Which WILL be sad!
AKA : THERMOSET
HOPE THIS HELPS!!
BiP is found in high concentration in the lumen of the ER but is not present in significant concentrations elsewhere in the cell. How do you think this condition is established and maintained
Answers
Answer:
Initially, endoplasmic reticulum plays a key role in the production of protein, while BiP found in the endoplasmic reticulum contains Lysine , Aspartic acid , Glutamic acid and Leucine sequence. All these, cause BiP concentration to remain high in the ER (endoplasmic reticulum) hence retained. Making the lumen always concentrated on BiP.
Explanation:
BiP is known as binding protein, that binds two or more molecules together and is found in the endoplasmic reticulum at the lumen due to the absence of glucose.
The endoplasmic reticulum found in fungi cells, plant cells, animal cells, and protists cells, makes and processes proteins.
Lysine , Aspartic acid , Glutamic acid and Leucine sequence ensures the protein concentration is protected in the endoplasmic reticulum (ER).
Which tool gives scientists information about the wind speed and humidity of a region?
Answers
Answer:
A weather station
Explanation:
A weather station measures the wind speed and humidity of a specific area. GIS gives visual data that scientists can analyze, GPS gives the exact location of a weather phenomenon, and a hammer and lens allow scientists to study Earth’s geologic features.
Express 0.107 g to centigrams.
Answers
Answer:
10.7
Explanation:
1 gram is equal to 100 centigrams
so, multiply
Indicate whether each of the following compounds dissolves in water to give ions, molecules, or both.
1. NaCl
2. HF
3. CH3CH2OH (ethanol)
4. HI
5. Weak electrolyte
6. Nonelectrolyte
7. Strong electrolyte
Answers
Answer:
The answer is in the explanation
Explanation:
An ion is defined as a particle that is positive or negative charged.
In water, strong electrolytes dissociates completely to produce ions. Weak electrolytes dissolves partially. One part in ions and the other still as the complete molecule. A nonelectrolyte doesn't dissociates in any way!
1. NaCl . STRONG ELECTROLYTE. Dissociates in ions
2. HF . WEAK ELECTROLYTE. Dissociates partially producing both molecules and ions
3. CH3CH2OH (ethanol) . NONELECTROLYTE. Doesn't dissociates producing just molecules.
4. HI . STRONG ELECTROLYTE. Dissociates completely in ions.
5. Weak electrolyte . Dissociates partially giving ions but also molecules
6. Nonelectrolyte . Only give molecules.
7. Strong electrolyte. Gives only ions.
Charlie is frying an egg in a pan located over a gas burner. He develops a model to determine the energy produced by the flame in the gas
burner by calculating the energy absorbed by the egg. Which assumption will Charlie need to make in order for his model to be considered a
closed system?
A. Heat flows from the egg to the surroundings.
O
B. Heat flows from the pan to the surroundings.
O
C. No heat is lost from the flame or the egg to the surroundings.
OD. The egg receives heat from the flame and the surroundings.
Answers
A closed system is one in which there is no exchange of materials or energy with the surroundings hence the correct assumption is that "No heat is lost from the flame or the egg to the surroundings."
Another name for a closed system is an isolated system. In such system, there is exchange of material or energy between the system and the surroundings.
In this case, the system comprises of the pan and the eggs. If the system is to be a closed system then " No heat is lost from the flame or the egg to the surroundings."
Learn more; https://brainly.com/question/8987993
If you want to cause an object to move, what should you do?
Answers
Answer:
For an object to move, there must be a force. A force is a push or pull that causes an object to move, change direction, change speed, or stop. Without a force, an object that is moving will continue to move and an object at rest will remain at rest.
Hoped I helped
Put me as brainliest
5. Water is known to have a composition which is 88.8% oxygen by mass. If you had a
sample of water with a total mass of 367g how many grams of that would be from
hydrogen?
Answers
Hydrogen : 367 - 367*0.888 = 41.104g
HELP ME PLEASE WILL GIVE MORE POINTS AND BRAINLIEST!!
The specific heat of aluminum is 0.900 J/gºC. How much energy is needed to raise the temperature of a 20.0 g block of aluminum from 22.8°C to 94.6°C?
Answers
✅Show work regardless if student got answer correct or incorrect
q = mC∆T
q = (30.0g)(0.900J/goC)(50oC)
q = 1350 J
So, the right answer is 1350 J
IamSugarBee◽
Decide which element probably forms a compound with hydrogen that has a chemical formula most and least similar to the chemical formula of the compound formed by hydrogen and selenium.
Answers
Answer:
Sulphur
Explanation:
Hydrogen sulphide
Chemical formula: [tex]H_{2} S[/tex]
Oxidation states: +1 and -2
Hydrogen selenide
Chemical formula: [tex]H_{2} Se[/tex]
Oxidation states : +1 and -2
Hope you found this helpful.
The figure shows four forces exerted on a box.
Box
If F, equals 4 N and F3 equals 6 N and the box remains stationary, which statement is correct?
a
F2 equals 6 N and F4 equals 4 N.
b
F2 equals 2 N and F4 equals 10 N.
F2 equals 10 N and F4 equals 2 N.
Od
F2 equals 4 N and F4 equals 6 N.
Answers
what are the major difference between potential and kinetic energy?
Answers
Answer:
The energy of a body or a system with respect to the motion of the body or of the particles in the system. Potential energy is the stored energy in an object or system because of its position or configuration. Kinetic energy of an object is relative to other moving and stationary objects in its immediate environment.
Chemistry questions below! (●'◡'●)
Answers
(1) • Balanced Equation : 2HgO (s) ---> 2 Hg (l) + O₂ (g)
• Line a is represented by activation energy, or the smallest amount of energy needed for molecules to undergo a chemical reaction.
• Activated complex is the intermediate state during the conversion of reactants into products. In this case it is represented by Hg----O-----O----Hg. The dashed lines indicate that the bond between Hg and O are breaking and their length is increasing and the dashed line between oxygen atoms indicate that the bond is decreasing and bond formation is taking place.
• This reaction is endothermic as the energy of reactants is smaller than the energy of products.
(2) • Balanced Equation : CH₃Br + OH⁻ ---> CH₃OH + Br⁻
• The hydroxide ion reacts with the bromomethane, resulting in a double replacement reaction. The 'CH₃' in 'CH₃Br' joins with the hydroxide ion to form CH₃OH, while the Br breaks off as an ion.
• Take a look at the energy diagram below.
How to make baking powder
Answers
Answer:
To make baking powder, combine half a teaspoon of cream of tartar and a quarter teaspoon of bicarbonate of soda.
hope it helps;)
Answer:
with baking soda
Explanation:
Which of the following is an example of using creativity while recording measurements during an experiment? (5 points) a Writing a hypothesis b Organizing data in tables c Validating results by repetition d Interpreting results based on data
Answers
Answer:A
Explanation:
In a double-blind test, the non-control group receives a
Answers
Answer:
Hi There! I'm new so I hope I get This Right! ^^
Explanation:
double blind test. the control group receives a placebo. Why is a placebo used in a double-blind test? so that the effects on people in two different groups can be compared.
happy To Help! ^^
In titrating 0.20 M hydrochloric acid, HCl, with 0.20 M NaOH at 25°C, the solution at the equivalence point is
Answers
Answer:
c) 0.10M NaCl
Explanation:
Options are:
a) 0.20M NaCl
b) Very acidic
c) 0.10M NaCl
d) 0.10M HCl + 0.20M NaOH
e) Slightly acidic.
Based on the reaction:
NaOH + HCl → H₂O + NaCl
You can see than 1 mole of NaOH reacts per mole of HCl producing 1 mole of NaCl
Assuming 1L of 0.20M HCl reacts with 1L of NaOH, moles of both compounds are:
1L * 0.20mol/L = 0.20 moles reacts. That means moles of NaCl produced are 0.20moles in 2L. Molarity of NaCl is:
0.20mol / 2L = 0.10M NaCl
That means, right option is:
c) 0.10M NaClAt the equivalence point, 0.01 M NaCl is present.
The reaction between NaOH and HCl occurs as follows;
NaOH(aq) + HCl(aq) ------> NaCl(aq) + H2O(l)
Concentration of HCl = 0.20 M
Concentration of NaOH = 0.20 M
Let as assume that the volume of both solutions is 1 L each
Number of moles of HCl = 0.20 moles
Number of moles of NaOH = 0.20 moles
The reaction is 1:1 hence 0.20 moles of NaCl is formed. However, the volume of the solution is now 2L.
Concentration of NaCl = 0.20 moles/2L = 0.01 M
Missing parts;
In titrating 0.20 M hydrochloric acid, HCl, with 0.20 M NaOH at 25°C, the solution at the equivalence point is
Select one:
a. 0.20 M NaCl
b. very acidic
c. slightly acidic
d. 0.10 M HCl and 0.20 M NaOH
e. 0.10 M NaCl
Learn more: https://brainly.com/question/5147266
write this in standard form
Answers
Answer:
yes sir GLSBYWPOS
Explanation:
trump sniffs broken window
Write 1 characteristic of Science
Answers
Answer:
Accuracy
Explanation:
For example a physician checking a person temperature who not say he is cold or hot but will give u an accurate answer after using a thermometer
A cubic container is filled up with an unknown liquid whose density is 0.180 g/cm3. The side lengh of the container is 5.00cm. Whaf is the mass of this liquid??
Answers
Answer:
THE MASS OF THE LIQUID IS 22.5 g
Explanation:
Density = 0.180 g/cm3
Side length = 5 cm
Mass = unknown
To calculate the mass of the liquid, we use the formula:
Mass = density * volume
Volume of a cube or cuboid container = l^3
Volume = 5 ^3 = 125 cm3
So therefore, the mass of the liquid is:
Mass = 0.180 * 125
Mass = 22.5 g
In conclusion, the mass of the liquid in the container is 22.5 g
Galileo discovered four of Jupiter's moons. They are Io, Europa, Callisto, and _____, which is the largest moon in the solar system. A. Titan B. Triton C. Phobos D. Ganymede
Answers
Answer:
D. Ganymede
I hope this helps!
Hot glass looks the same as cold glass.
Answers
Answer:
no becuase the cold glass will have water droplets, whil the hot one has steam
Explanation:
Why is environmental science more than just ecology or biology?
Answers
Generally speaking, environmental science is a broader field that incorporates many elements of earth and life sciences, whereas ecology is usually more focused on how organisms interact with each other and their surroundings, and often on a very specific population of living things.
IamSugarBee
Describe all of the forces acting on the ice cream in the root beet float. Relate these forces to the fact that the ice cream is floating.
Answers
Answer:
he root beer exerts a force on all sides of the ice cream. These forces are all equal and cancel each other out. Gravity pushes downward on the ice cream. ... The ice cream floats because the buoyant force is greater than the weight of the ice cream.
Explanation:
Answer:
he root beer exerts a force on all sides of the ice cream. These forces are all equal and cancel each other out. Gravity pushes downward on the ice cream. ... The ice cream floats because the buoyant force is greater than the weight of the ice cream.
Explanation:
100%
54578 meters per second into miles per hour
Answers
Answer:
54578 mps - 122087.51 mph
Explanation:
true or false a measurement must include a unit
Answers
HI :)
True
Hope this helps :)
How to know what gases have more effusion?
Answers
Answer:
If you have ever been in a room when a piping hot pizza was delivered, you have been made aware of the fact that gaseous molecules can quickly spread throughout a room, as evidenced by the pleasant aroma that soon reaches your nose. Although gaseous molecules travel at tremendous speeds (hundreds of meters per second), they collide with other gaseous molecules and travel in many different directions before reaching the desired target.
Explanation:
hope this helps
What happens to the muscle of dmd while working out
Answers
Nickel-63 has a half life of 92 hours. If a
1000 gram sample decayed for 368 hours,
how much Nickel-63 remains?
Answers
Answer:
6.25 g of nickel -63 will be left
Explanation:
Question 2 of 5
What is the frequency of a wave that passes a given point 57 times in 3.0
seconds?
O A. 0.053 s
B. 19 Hz
C. 171 Hz
O D. 60 s
SUBMIT
Answers
Answer:
Frequency=?,number of oscillation=57,time=3.
There are two ways to go about this....
You can other use this formula: frequency=number of oscillation/time.
which is 57/3=19Hz.
OR.
You can use this formula:Period is time/number of oscillation.. which is..
3/57=0.053.
and frequency is 1/T....The "T" stands for period.
So since frequency is 1/T then it will be 1/0.053=18.8~19Hz..
The answer is option B.
Thank you for the question I hope it helps you