a student mixes 50.0 ml of 0.10 m pb(no3)2 solution with 50.0 ml of 0.10 m kcl. a white precipitate forms, and the concentration of the chloride ion becomes very small. which list places the concentrations of the remaining ions in order of decreasing concentration?

The percent by mass of the solution of H2O2 is 1.6547%, when hydrogen peroxide decomposes into water and oxygen.

How to calculate percent by mass of the solution?

To find the percent by mass of a solution of hydrogen peroxide (H2O2) prepared from 1.423 g of H2O2 that is titrated with 40.22 mL of 0.01143 M KMnO4(aq), you will need to determine the mass of H2O2 that is actually present in the solution.

The balanced equation for the reaction is:

2KMnO4(aq) + 3H2O2(aq) + 8H+(aq) --> 2MnO2(s) + 5O2(g) + 8H2O(l)

From the equation, we know that for every 2 moles of KMnO4(aq), 3 moles of H2O2(aq) are consumed. Therefore, the number of moles of H2O2 that are actually present in the solution can be determined by multiplying the moles of KMnO4 consumed by 3/2.

The moles of KMnO4 consumed can be determined by multiplying the volume of KMnO4 used by its concentration in mol/L.

So the moles of KMnO4 = 40.22 mL x 0.01143 mol/L = 0.459 mol

The moles of H2O2 present = (3/2) x 0.459 mol = 0.6885 mol

The mass of H2O2 present = 0.6885 mol x 34.02 g/mol = 23.55 g

Therefore, the percent by mass of the solution of H2O2 is (23.55 g / 1.423 g) x 100 = 1.6547 %

To learn more about hydrogen peroxide, visit: https://brainly.com/question/25566753

#SPJ1

Taking into account the reaction stoichiometry, a mass of 18.24 grams of O₂  combines with 1.14 mol of magnesium.

The balanced reaction is:

2 Mg + O₂ → 2 MgO

By reaction stoichiometry, the following amounts of moles of each compound participate in the reaction:

The molar mass of the compounds is:

By reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

The following rule of three can be applied: If by reaction stoichiometry 2 moles of Mg react with 32 grams of O₂, 1.14 moles of Mg react with how much mass of O₂?

mass of O₂= (1.14 moles of Mg× 32 grams of O₂)÷2 moles of Mg

mass of O₂= 18.24 grams

Finally, a mass of 18.24 grams of O₂ is needed.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

brainly.com/question/24653699

#SPJ1

Answer:

1-Temporarily store food.

2-Contract and relax to mix and break down food.

3-Produce enzymes and other specialized cells to digest food

When one gram of table salt is put into an 8-oz glass and the glass is filled with tap water, the concentration of salt is 4226 mg/mL.

An ounce , which is abbreviated as "oz" is a unit of measurement of weight equal to one-sixteenth of one pound.

In the United States, an ounce is the  smallest and commonly used unit of measurement of weight for small items, such as pens, pencils, deodrant sticks etc., are mostly measured in ounces. In addition to this, the weight of an envelope that is used to post letters is measured in ounce. Weight of the stamps will also cover in ounces.

Here, Concentration of salt is calculated as:

= 1 g/8 oz

=1000 mg/0.236588 L

=4226 mg/L

Therefore, concentration of salt is 4226 mg/mL

To know more about concentration of salt here

https://brainly.com/question/11954945

#SPJ4

One kilogram of water requires one kilocalorie of heat energy to increase its temperature by one degree F.

Your body temperature is usually around 37 °C. You frequently get a fever when your body is 37.8°C or higher. You can feel unsteady, sweaty, or chilly. You can tell whether you have a fever by taking your temperature using a thermometer.

Is India hotter than Australia? India is anticipated to be hotter since it is closer to the equator than Australia. Most of India's interior regions see average temps between 90 and 104 °F. In contrast, Australia's summertime average temperature is 86 °F.

To know more about temperature visit:

https://brainly.com/question/13294753

#SPJ4

The net ionic equation for the reaction is:

H+(aq) + CO3^2-(aq) → NO3^-(aq) + H2O(l) + CO2(g)

The given reaction is acid-base neutralization, where HNO3 (nitric acid) acts as the acid, and KHCO3 (potassium hydrogen carbonate) acts as the base. The H+ ion from HNO3 reacts with the CO3^2- ion from KHCO3 to form H2O (water) and CO2 (carbon dioxide) as products. The remaining ions combine to form KNO3 (potassium nitrate) as the main product.

KHCO3 is Potassium bicarbonate. It is a white, crystalline, slightly alkaline and salty substance. It is created by the passage of carbon dioxide through an aqueous potassium carbonate solution. It is used in medicine as an antacid.

To know more about carbon dioxide, visit here:

https://brainly.com/question/15063989

#SPJ4

When the small molecules are linked together to form the larger molecules, the increase in the entropy typically comes from : heat.

The entropy can be defined as the measure of the randomness or the disorder of the particular system. Some properties of the entropy is given as :

1) The SI unit of the entropy is J/Kmol

2) The entropy is the thermodynamic function.

3) The entropy is the state function.

4) The entropy is depends on the state system and not on the path.

Thus, the increase in the entropy comes in the form of heat when  the small molecules are linked together to form the larger molecules.

To learn more about entropy here

https://brainly.com/question/14483037

#SPJ4

A metal's chemical properties can affect its ability to withstand the high temperatures and pressures of a rocket launch.

How is chemistry involved in making rockets?

Chemistry is involved in making rockets in a variety of ways. The fuels used to power rockets are a mixture of flammable liquids and solid propellants, and the chemical reactions that occur when these propellants are ignited provide the thrust necessary to propel the rocket upwards. The fuels used in rocket propulsion also require precise control of their chemical composition to ensure optimal efficiency and performance. The materials used in rocket construction must be able to withstand extreme temperatures and pressures, and the use of various chemical treatments and coatings helps to achieve this. Finally, the development of new rocket fuels and other materials used in rocket construction requires extensive research and development in the field of chemistry.

Metals with higher melting points and corrosion resistance are more suitable for use in rocket construction as they will be able to withstand the harsh environment of a launch. Additionally, certain metals may be more reactive than others and can produce dangerous byproducts when exposed to extreme temperatures. Therefore, understanding the chemical properties of the metal being used can help ensure the rocket is able to withstand the launch and not cause any safety hazards.

Therefore, to withstand the high temperatures and pressures of a rocket launch chemical property of a metal is used.

To learn more about making rockets from the link

https://brainly.com/question/28596310

#SPJ1

The main/most important factor that differentiates methanol, ethanol, and isopropanol from each other is the the number of the carbon atoms in the molecule.

1) The methanol : The molecular formula for the compound methanol is  CH₃OH. It contains number of the carbon atom is one.

2) The ethanol : The molecular formula for the compound ethanol is C₂H₆O. It contains the number of the carbon atoms is two.

3) The isopropanol : The molecular formula for the compound isopropanol is C₃H₈O. It contains the number of the carbon atom is 3.

Thus, it is clear that the main difference in these three compound is the difference in the number of the carbon atoms.

To learn more about methanol here

https://brainly.com/question/11451045

#SPJ4

The slight overlap of the Van der Waals surfaces between the catalytic triad residues is important for the structural relationships of the residues, allowing for proper positioning and orientation. It also helps to stabilize the transition state of the enzyme-catalyzed reaction which is crucial for the catalytic activity of the enzyme

The slight overlap of the Van der Waals surfaces is also known as the Van der Waals interaction. It is important for the structural relationships of the catalytic triad residues in enzymes.

Enzymes are biological catalysts that speed up chemical reactions in cells. A common feature of enzymes is the presence of a catalytic triad, which is a group of three amino acid residues that are critical for the enzyme's catalytic activity. The catalytic triad residues are typically composed of a nucleophile, a base, and an acid/proton acceptor.

Learn more about Van der Waal's Interaction here: https://brainly.com/question/5541979

#SPJ4

According to Figure 2, the maximum positive value of Vs was approximately: 250 V.figure was attached below.Vs means valence.

The power supply voltage, Vs, and the circuit current, I, are monitored throughout a 20 msec time span in Figure 2. The dashed line denotes the voltage Vs. We must identify the peak or crest of the dashed curve in order to get the highest positive value of Vs. This highest point on the graph corresponds to either 0.25 amps or 250 volts.Maximum elemental valence. The data from the list of the elements' oxidation states is used to calculate the elements' maximum valences. Maximum positive acceleration occurs when the slope of the velocity-time curve is greatest, at t=3s, and is around (6m/s-2m/s)/(4s2s)=2m/s 2 (the slope of the graph). (c) When the slope of the velocity-time graph is zero, which happens at t=6s and also for t>10s, the acceleration a=0.

learn more about valence Refer :brainly.com/question/5365825

#SPJ4

In the case of magnesium, calcium, aluminum, and potassium, potassium is the most reactive metal.

In general, reactivity of a metal increases as you move down a group or a column in the periodic table. The reactivity of a metal is related to the ease with which it loses electrons to form a positive ion, or cation. In the case of magnesium, calcium, aluminum, and potassium, potassium is the most reactive metal. It is located in the first group or column of the periodic table, and has the smallest atomic radius and the most loosely held outermost electrons. This makes it easier for potassium to lose electrons and form a positive ion, making it the most reactive of the four metals mentioned. Aluminum is the next most reactive, followed by calcium and magnesium. Magnesium is the least reactive of the four metals mentioned.

To know more about magnesium please refer: https://brainly.com/question/1533548

#SPJ4

When a can of coke is removed from the fridge and then warmed up to room temperature, the entropy of the beverage will increase.

We can define entropy as the disorderness of a system or the randomness of a particular system. The entropy of a system changes with a change in the temperature of the system.

As the temperature increases, the entropy of the system also increases and when the temperature is reduced, the entropy of the system also decreases. When a can of coke is kept in fridge, the entropy decreases as the temperature gets decreased.

As the can of the coke is taken out and warmed up to room temperature, the entropy increases with the increase in temperature as the randomness of the molecules increases.

To know more about entropy here

https://brainly.com/question/14131507

#SPJ4

Answer: 1

Explanation:

The Gibbs free energy of reaction is the difference in Gibbs energy of formation of the products and that of the reactants. The ΔGrxn for the given reaction is  -2453 kJ.

The Gibbs free- energy is the available energy form for a system. The Gibbs free energy change of a reaction is given as follows:

ΔGrxn = ∑ΔGf (products) - ∑ΔGf (reactants)

The Gibbs energy of formation of all the reactants and products are given in the data. Hence, multiply each value with corresponding number of moles and the Gibbs energy of the reaction is given as:

ΔGrxn = (4 ×-394.4 kJ/mol) + (2×-288.57 kj/mol) - (2 × 209.2 kJ/mol)

           =  - 2453 kJ.

Therefore, the ΔGrxn of the given reaction is -2453 kJ.

Find more on Gibbs energy change:

https://brainly.com/question/15213613

#SPJ1

An aqueous solution of the silver fluoride, AgF, contains 2.96 grams of the silver fluoride and 17.6 grams of the water. The percentage by mass of silver fluoride in the solution is 14.3 %.

The mass of the silver fluoride = 2.96 g

The mass of the water = 17.6 g

The mass of the solution = mass of the AgF + mass of water

                                         =  2.96 g + 17.6 g

                                         = 20.56 g

The percentage by mass is expressed as :

The percentage by mass of AgF = (mass of AgF / mass of solution) ×100%

The percentage by mass of AgF = (2.96 g / 20.56 ) ×100%

The percentage by mass of AgF = 14.3 %                                  

To learn more about silver fluoride here

https://brainly.com/question/29515485

#SPJ4

Pollution refers the release of hazardous pollutants into the environment. These hazardous elements are referred to as contaminants. Pollutants may be naturally occurring, such as volcanic ash.

They may also be caused by human activities, such as factory runoff or waste. Pollutants have a negative impact on the quality of the air, water, as well as land.

Pollution refers the release of hazardous pollutants into the environment. These hazardous elements are referred to as contaminants. Pollutants may be naturally occurring, such as volcanic ash. They may also be caused by human activities, such as factory runoff or waste. Pollutants have a negative impact on the quality of both the air, water, as well as land.

To know more about Pollution

https://brainly.com/question/28519286

#SPJ4

The pH of a solution made by dissolving 13.7 g of HCl in 643 ml of water is 2.23.

The pH of a solution made by dissolving 13.7 g of hydrochloric acid (HCl) in 643 ml of water can be calculated using the following steps:

1. Calculate the molarity of the solution. This is done by dividing the amount of HCl (13.7 g) by the molar mass of HCl (36.46 g/mol), which gives us 0.376 mol of HCl. Then, divide this number by the volume of the solution (643 ml), which gives us a molarity of 0.00587 mol/L.

2. Calculate the pH of the solution. This is done by using the expression pH = -log[H+], where [H+] is the concentration of hydrogen ions in the solution. Taking the negative logarithm of 0.00587 mol/L gives us a pH of 2.23.

To learn more about pH, click here:

https://brainly.com/question/15289741

#SPJ4

"energy is created from the nucleus of the atom" describes energy in a nuclear reaction.

Nuclear reaction, a change in the identity or properties of an atomic nucleus caused by the bombardment of an energetic particle. The particle that is bombarding may be an alpha particle, a gamma-ray photon, a neutron, a proton, or a heavy ion. Nuclear reactions are collisions between two atomic nuclei or one atomic nucleus and a subatomic particle that produce one or more nuclides. Nuclear reactions produce nuclides that are distinct from the reacting nuclei (commonly referred to as the parent nuclei).

Here,

The phrase "energy is created from the nucleus of the atom" describes the generation of energy in a nuclear reaction.

To know more about nuclear reaction,

https://brainly.com/question/13315150

#SPJ1

Noble gases are chemical elements with eight valence electrons and as such have a full octet. Some examples are argon, neon, etc. Hence, the full octet makes the gas (neon) unlikely to combine with other elements.

The class of substances known as noble gases also includes neon, helium, argon, krypton, and xenon. These elements have entire valence shells, making them the most stable and least reactive (the outer shell has the max number of electrons, two for helium, eight for the rest). The reason NOBLE gases are so named is because, like the nobility, they are inert. Because they are practically unheard of on Earth, you may also refer to them as rare gases. One exception to this rule is argon, which we breathe in as 1% of every breath even though it has no impact on our bodies whatsoever.

Learn more about neon here:

https://brainly.com/question/24481291

#SPJ4

Guaiacol, a pale yellow oily liquid that is the allylic replacement for eugenol(C10H12O2 ), is a liquid. Its aroma is pleasant, spicy, and reminiscent of cloves. It is one of the most significant substances found in cloves.

The compound eugenol (4-allyl-2-methoxyphenol) has anti-inflammatory, antiseptic, and antibacterial effects. One of the reduced phenylpropanoids and a key ingredient in clove oil is eugenol.C10H12O2 -> 5 unsaturation sites. For a molecule of this size (i.e., only 10 carbons), the presence of a phenyl ring is often responsible for the high number of unsaturation sites (which provides 4sites on its own). Look for signals in the 7-8 ppm (aromatic proton) range in the 1H nmr spectrum for an immediate demonstration..

learn more about eugenol Refer:brainly.com/question/29389817

#SPJ4

0.0000128 mole TiO2 in a jelly bean.Any chemical molecule, whether created chemically or naturally, that exclusively contains the elements titanium and oxygen is referred to as titanium oxide.

With the chemical formula TiO2, titanium dioxide, sometimes referred to as titanium(IV) oxide, is an inorganic substance. It is also known as titanium white, Pigment White 6 (PW6), or CI 77891 when used as a pigment.

Step 1: Given data

Number of moles of titanium (IV) oxide in 1 jelly bean (n):7. 69x10^( 18)

Step 2: Calculate the mass (in grams) corresponding to 7. 69x10^( 18) moles of TiO₂

To convert moles to mass, we need a conversion factor. In this case, it is the molar mass of TiO₂: 79.87 g/mol.

7. 69x10^( 18) mol TiO₂ × 79.87 g TiO₂/1 mol TiO₂

= 1.64*10^(20)g TiO₂

when mass is reversely converted to moles then the moles:0.0000128 mole TiO2.

Although mineral forms might seem black, it is a solid that is insoluble in water and is white in colour. It may be used as a pigment in a variety of products, such as paint, sunscreen, and food colouring. Its E number for usage as food colouring is E171.

learn more about titanium dioxide Refer:brainly.com/question/16978406

#SPJ4

Igneous rocks are regarded as intrusive, despite the fact that they were essentially created from magma under the earth's surface.

Due to the diverse chemical composition, size, and structural characteristics of the rocks, igneous rock crystals are created.

Because igneous rock crystals are generated due to various chemical compositions, sizes, and structures, they are used to classify the rock itself. When lava cools and solidifies, igneous rocks are the type of rocks that are created.

Grain size, silica concentration, and silica saturation are used to categorize them. The pace of cooling determines the kind of igneous rock, with slow cooling leading to the construction of large crystals and rapid cooling to the production of microscopic crystals. The chemical makeup of the igneous rocks determines how they are categorized.

To learn more about igneous rocks refer to:

https://brainly.com/question/18297174

#SPJ1

At this location, a solution is made up of dimethylamine, a weak base, and dimethylammonium bromide. The solution's pH value is 10.96.

a material that can neutralize acids and receive hydrogen ions from water. Bases can color certain colours blue and feel sloppy or soapy upon that skin. Sodium hydroxide is a good illustration of a base.

Because it totally dissociates into sodium ions as well as hydroxide ions, hydrogen peroxide is the strongest base. Further away from the acid, these strong acids are treated with hydronium ions, totally ionizing the hydrogen ions.

pOH = pKb + log [acid]/[base]

pOH = -log 1.3 × 10⁻³ + log 0.20 M/0.14 M

pOH = 3.04

pH of the solution,

pH + pOH = 14

pH = 14 - pOH

= 14 -3.04

= 10.96

To know more about base visit:

https://brainly.com/question/27089588

#SPJ4

Detergents, such as washing powder, are able to remove greasy stains from clothes by breaking down the grease into smaller, more manageable particles.

Detergents contain molecules with a hydrophobic (water-repelling) end and a hydrophilic (water-attracting) end. When added to water, the hydrophobic ends of the detergent molecules attach to the grease and oil on the clothes, while the hydrophilic ends remain in the water. This causes the grease and oil to be pulled away from the clothes and suspended in the water, making them easier to wash away.

Water is considered "soft" when it contains low levels of dissolved minerals such as calcium and magnesium. Hard water contains high levels of these minerals, which can cause buildup on fixtures and appliances over time. When using detergents in hard water, the minerals in the water can interfere with the detergent's ability to lather and clean effectively, which means that more detergent is needed to achieve the same results. In contrast, soft water does not have this issue and less detergent is needed to achieve the same cleaning power.

To know more about hard and soft water click here:

https://brainly.com/question/28178305#

#SPJ4

The volume flow rate in ml/s will depend on the size and design of the trigger, and thus cannot be accurately determined without more information.

To learn more about The volume flow rate refer to:

https://brainly.com/question/14090152

#SPJ1

the reaction's 2N2O5→2N2O4+O2  frequency factor at 303 K is A = 9.15 x 10^-4 s^-1 *

The specific rate constant (k) of a first-order reaction is given by the equation:

k = A*e^(-Ea/RT)

Where A is the frequency factor, Ea is the activation energy, R is the gas constant and T is the temperature in Kelvin.

Substituting for A:

A = k*e^(Ea/RT)

We know that the specific rate constant at 303 K is 9.15 x 10^-4 s^-1, and we can assume that the activation energy (Ea) and gas constant (R) are constant.

T = 303 K

Plugging in the known values we get

A = 9.15 x 10^-4 s^-1 * e^(Ea/R*303)

The frequency factor, A, is a measure of the number of collisions of reactant molecules per unit of time that have sufficient energy to overcome the activation energy barrier and form products. The value of A can be used to compare the relative rates of different reactions. The fact that the specific rate constant at 293 K is 2.35 x 10^-4 s^-1 and at 303 K is 9.15 x 10^-4 s^-1, indicates that the reaction rate increases with increasing temperature. This is consistent with the expected behavior of a first-order reaction, as an increase in temperature will increase the kinetic energy of the reactant molecules, making them more likely to collide with each other and form products.

Learn more about  specific rate constant here:

https://brainly.com/question/16012644

#SPJ4

Search for the complete question is :

In solvents like CCl4, the reaction 2N2O52N2O4+O2 occurs at or near room temperature. At 293 K, the particular rate constant is discovered to be 2.35 104 s1, while at 303 K, it is discovered to be 9.15 104 s1. Determine the reaction's frequency factor at 303 K.

D) sodium chloride (NaCl) and hexane (c6h14) are most likely to form a solution when mixed.

Sodium chloride (NaCl) and hexane (C6H14) are two common substances that can form a solution when mixed. When these two substances are combined, the sodium chloride molecules interact with the hexane molecules and form a homogenous mixture.

This mixture allows for the two components to be evenly distributed throughout, creating a solution. The combination of sodium chloride and hexane is able to form a solution due to the polar nature of sodium chloride and the non-polar nature of hexane.

The polar nature of sodium chloride allows it to form strong hydrogen bonds with the non-polar hexane molecules, resulting in a homogenous mixture.

To learn more about sodium chloride, click here:

https://brainly.com/question/9811771

#SPJ4

Dr. Fowler tests her hypothesis in order to rule out another likely alternative through the fact that it evaluates the key vulnerabilities to climate change, and assesses aggregate damage levels and the role of multiple stresses.

A hypothesis may be defined as a testable statement about the relationship between two or more variables or a proposed explanation for some observed phenomenon.

According to the context of this question, if the rats of Group A live outdoors, it seems to learn more quickly. This is because of the presence of a specific trait. This trait is due to genetic differences between the two groups of rats which governs the specific phenotypic expression in the overall presence of genes or alleles.

Therefore, the fact that it evaluates the key vulnerabilities to climate change, and assesses aggregate damage levels and the role of multiple stresses.

To learn more about Genetic differences, refer to the link:

https://brainly.com/question/14926046

#SPJ1

Unsaturated fatty acids are the first option (A).

To Learn more About  fatty acids  Refer To:

https://brainly.com/question/17352723

#SPJ1