Explanation:
A process where two or more number of miscible liquids present in different fractions are separated by boiling at different temperatures is called fractional distillation.
The sudden decrease in temperature is because the compounds having lower boiling point have completed the distillation before vapor of the higher boiling point can actually fill the distillation head.
11. Which of these conditions would decrease the rate of photosynthesis in a plant?
A. above average precipitation
B. Changing the daylight hours from 14 hrs to 10 hrs
C. Changing the CO2 concentration from 380 ppm to 410 ppm
D. All of these choices
Answer:
B. Changing the daylight hours from 14 hrs to 10 hrs
Explanation:
A diamond can make permanent marks on glass. It can also cut glass. Most other materſals cannot do this.Which property of a diamond allows it to make cuts or marks on glass? a. Hardness b. Heaviness c. Roughness d. transparency
Solution A is yellow when alizarin yellow is added and blue when thymol
blue is added. Which of the following correctly identifies Solution A?
A. 3.2 x 10-4 mol/L HCI
B. 3.2 x 10-4 mol/L NaOH
C. 6.3 x 10-5 mol/L HCI
D. 6.3 x 105 mol/L NaOH
Answer:
D. 6.3 x 10-5 mol/L NaOH
Explanation:
Alizarin yellow is an indicator that is yellow when pH < 10.1. In the same way, thymol blue is blue when pH > 9
That means the pH of the solution is between 9 - 10.1
Any acid as HCl could have a pH of these.
The solution of 3.2x10⁻⁴M NaOH has a pH of:
pOH = -log[OH-] = 3.49
pH = 14-pOH = 10.51. The pH of the solution is not 10.5
Now, the solution of 6.3x10⁻⁵M NaOH has a pH:
pOH = -log[OH-] = 4.2
pH = 14-pOH = 9.8
The pH of the solution could be 9.8. Right option is:
D. 6.3 x 10-5 mol/L NaOHfind the sum of angles x° and y° from the given figure
Answer:
where is the figure . u can simply add them
Which of these statements are true? Select all that apply.
The AH+ for Br2() is 0 kJ/mol.
The AH; for Hel) is 0 kJ/mol.
The AH+ for Hg() is 0 kJ/mol.
The AHp for Cl2(g) is 0 kJ/mol.
The AH; for N261) is 0 kJ/mol.
Answer:
The AH+ for Br2() is 0 kJ/mol.
The AH+ for Hg() is 0 kJ/mol.
The AH; for N261) is 0 kJ/mol.
Explanation:
The statements 1,3,4 and 5 are true.
What is meant by enthalpy ?Enthalpy is defined as a thermodynamic quantity, which can be considered equal to the total heat of the system.
Here,
1) The enthalpy of formation of Br₂ (cr, l) is 0 kJ/mol.
So, the statement is true.
2) The enthalpy of formation of He(l) is not zero.
So, the statement is false.
3) The enthalpy of formation of Hg(l) is 0 kJ/mol.
So, the statement is true.
4) The enthalpy of formation of Cl₂(g) is 0 kJ/mol.
So, the statement is true.
5) The enthalpy of formation of N₂ is 0 kJ/mol.
So, the statement is true.
Hence,
The statements 1,3,4 and 5 are true.
To learn more about enthalpy, click:
https://brainly.com/question/3298339
#SPJ5
Find the pH of 0.05M Pyridine C 6 H 5 N solution. Know the base dissociation constant K C6H5N = 1.7.10 -9 .
Answer: 10
Explanation:
Enter the molecular formula for butane, C4H10
Answer:
C4H10
Explanation:
you already written it :)
How does the neutron number in each compare
Answer:
Neutrons are all identical to each other, just as protons are. Atoms of a particular element must have the same number of protons but can have different numbers of neutrons.
Explanation:
Since the vast majority of an atom's mass is found its protons and neutrons, subtracting the number of protons (i.e. the atomic number) from the atomic mass will give you the calculated number of neutrons in the atom. In our example, this is: 14 (atomic mass) – 6 (number of protons) = 8 (number of neutrons).
Ayuda plissss es para hoy
alimientos procesados:
cereales, queso ,verduras enlatadas, un pan bocadillos salados, como patatas fritas, panecillos de salchicha, tartas y empanadas productos cárnicos, como tocino, salchicha, jamón, salami y paté comidas para microondas o comidas preparadas pasteles y galletas bebidas, como leche o refrescos
alimientos naturales
1. Pescado · 2. Brócoli o cualquiera de las verduras crucíferas · 3. Remolacha · 4. Espinacas y otras verduras de hoja verde · 5. Col rizada · 6. Mantequilla de maní · 7. Almendras.pechugas de pollo, Cordero, Salmón, Camarón,Aceite de coco,Nueces y semillas
Answer:
what
Explanation:
1. Write the structural formulas and give IUPAC names for all isorneric alcohols of molecular formula
С4Н9OH
Explanation:
Butanol (С4Н9OH)
Structural formula is :-
CH3-CH2-CH2-CH2-OH
Acetylenic fatty acids are found in many tropical plants. Compound B, C18H32O2, is one such compound; it absorbs 2 equivalents of H2 when treated with H2 over a Pd/C catalyst. Ozonolysis of compound B produces the following products: nonanedioic acid (HOOC(CH2)7COOH) nonanoic acid (HOOC(CH2)7CH3) Draw the structure of compound B.
Answer:no
Explanatio:
tôahrhafkjdjf
first law of the thermodynamic indicates.?
Answer:
The first law of thermodynamics states that energy can neither be created nor destroyed, only altered in form. For any system, energy transfer is associated with mass crossing the control boundary, external work, or heat transfer across the boundary. These produce a change of stored energy within the control volume.
Explanation:
how much reactant (KClO3) is required to produce 3.5 mil of O2
Answer:
[tex]2.3molKClO_3[/tex]
[tex]285.95gKClO_3[/tex]
Explanation:
Hello there!
In this case, according to the balanced chemical equation:
[tex]2KClO_3\rightarrow 2KCl+3O_2[/tex]
We can observe the 2:3 mole ratio in order to calculate the moles of KClO3 required for such production:
[tex]3.5molO_2*\frac{2molKClO_3}{3molO_2} \\\\2.3molKClO_3[/tex]
And in grams:
[tex]2.3molKClO_3*\frac{122.55gKClO_3}{1molKClO_3} \\\\=285.95gKClO_3[/tex]
Regards!
Regards!
Draw the R enantiomer of CFClBrI as a 3-D (wedge and dotted line) structure and as a Fischer projection (putting the I at the top and the F to the right). Be able to draw Fischer projections for other simple compounds with a single chiral carbon.
The 3D structure of R- CFClBrI is drawn using wedges and dotted line with I in the top and F right to I and Fischer projection is drawn using lines for bonds where C is placed at center and I in the top with F right to it.
What is an enantiomer?An enantiomer is a spatial isomer of a compound having different spatial configuration but the same formula. Enantiomers are non-superimposable mirror images of each other.
In R- enantiomer, the elements are arranges in a way that on numbering in clockwise direction, the priority of group decreases from 1 to 2 to 3 and follows. The highest priority group is numbered first.
If the count 1..2..3 goes in anti-clockwise direction, then the enantiomer is termed as S. In 3D projection, wedges and dotted lines are used for representing bonds.
In Fischer projection, lines are used for bonds as shown in the uploaded image. Where the chiral carbon is shown in center and other groups are allotted as per the R or S configuration.
Therefore, the 3D image and Fischer projection of CFClBrI is drawn as in the image uploaded.
To learn more about, enantiomers, refer the link below:
https://brainly.com/question/21506956
#SPJ2
What’s the correct answer
Answer:
I think it's 2-methylhept-2-ene
Explanation:
Hope this will help and correct me if I'm wrong.
What is the volume in milliliters of 7.92 g of acetone?
Answer:
The volume of acetone is 9.24 mL
Explanation:
Which sequence contains elements listed from most reactive
to least reactive?
Answer:
Transition metals, alkali metals, alkaline earth metals Transition metals - Middle of the periodic chart, only average reactivity. alkali metals - As mentioned above, very reactive. Bad choice, going from lower reactivity to higher reactivity.
Hope this answer is right!
3. Identify the spectator ion(s) in the following reaction.
Cu(OH)2(s) + 2H+ (aq) + 2Cl(aq) → Cu2+(aq) + 2Cl(aq) + 2H2O(1)
a. Cu2+ and CV
b. Cu2+
C. Cu(OH)2
d. CT
e. Ht and CT
The spectator ion in a reaction is the one which have no role on precipitate or product formation. Here the product is water and aqueous copper chloride. Where copper ions and chloride ions are spectator ions undergoing no state change.
What is spectator ion?A spectator ion in a reaction is the ion which does not undergo any change in state and remains so in the reaction system. To identify the spectator ion we have to write the balanced complete ionic equation.
An ionic equation of a reaction represents all the ions in the reaction with their states of matter given in brackets. The charges of each ions have to be written correctly and they have to balanced in both side.
If the same ions in same state are there in both side, they can be canceled and the net ionic equation does not contain these ions. Therefore, these ions which can be canceled from the net equation is called spectator ions.
In the given reaction copper ions and Cl- ions are aqueous state on both side. Thus, they can be cancelled from net equation representing the formation of water. Hence, Cu²⁺ and Cl⁻are the spectator ions.
To find more on spectator ions, refer here:
https://brainly.com/question/28913274
#SPJ2
Question List (4 items) (Drag and drop into the appropriate area) Find the volume of HCl that will neutralize the base. Find the mass (in grams) of Ca(OH)2. Calculate the number of moles of Ca(OH)2. Calculate the number of moles of H required to neutralize the base.
The question is incomplete, the complete question is:
The solubility of slaked lime, [tex]Ca(OH)_2[/tex], in water is 0.185 g/100 ml. You will need to calculate the volume of [tex]2.50\times 10^{-3}[/tex]M HCl needed to neutralize 14.5 mL of a saturated
Answer: The volume of HCl required is 290mL, the mass of [tex]Ca(OH)_2[/tex] is 0.0268g, the moles of
Explanation:
Given values:
Solubility of [tex]Ca(OH)_2[/tex] = 0.185 g/100 mL
Volume of [tex]Ca(OH)_2[/tex] = 14.5 mL
Using unitary method:
In 100 mL, the mass of [tex]Ca(OH)_2[/tex] present is 0.185 g
So, in 14.5mL. the mass of [tex]Ca(OH)_2[/tex] present will be =[tex]\frac{0.185}{100}\times 14.5=0.0268g[/tex]
The number of moles is defined as the ratio of the mass of a substance to its molar mass.
The equation used is:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)
Given mass of [tex]Ca(OH)_2[/tex] = 0.0268 g
Molar mass of [tex]Ca(OH)_2[/tex] = 74 g/mol
Plugging values in equation 1:
[tex]\text{Moles of }Ca(OH)_2=\frac{0.0268g}{74g/mol}=0.000362 mol[/tex]
Moles of [tex]OH^-[/tex] present = [tex](2\times 0.000362)=0.000724mol[/tex]
The chemical equation for the neutralization of calcium hydroxide and HCl follows:
[tex]Ca(OH)_2+2HCl\rightarrow CaCl_2+2H_2O[/tex]
By the stoichiometry of the reaction:
Moles of [tex]OH^-[/tex] = Moles of [tex]H^+[/tex] = 0.000724 mol
The formula used to calculate molarity:
[tex]\text{Molarity of solution}=\frac{\text{Moles of solute}\times 1000}{\text{Volume of solution (mL)}}[/tex] .....(2)
Moles of HCl = 0.000724 mol
Molarity of HCl = [tex]2.50\times 10^{-3}[/tex]
Putting values in equation 2, we get:
[tex]2.50\times 10^{-3}mol=\frac{0.000724\times 1000}{\text{Volume of solution}}\\\\\text{Volume of solution}=\frac{0.000725\times 1000}{2.50\times 10^{-3}}=290mL[/tex]
Hence, the volume of HCl required is 290mL, the mass of [tex]Ca(OH)_2[/tex] is 0.0268g, the moles of
what is the formula for trioxocarbonate (IV)
Answer:
[tex]CO_3^{2-}[/tex]
Explanation:
Trioxocarbonate (iv) salts result from the reaction of trioxocarbonate(iv) acid with metals and metal oxides.
All sodium, potassium, and ammonium of trioxocarbonate(iv) salts appearas to be soluble, while all others are insoluble.
Apart from Na and K, all trioxocarbonate (iv) salts breakdown to release CO2 when heated.
The formula for Trioxocarbonate (iv) is: [tex]CO_3^{2-}[/tex]
So, we can have Sodium trioxocarbonate as [tex]Na_2CO_3[/tex] and sodium hydrogen trioxocarbonate (iv) [tex]NaHCO_3[/tex]
A postulate is a statement recognized as a truth. The kinetic molecular theory has five postulates. Which of the following is NOT a postulate regarding the behavior of ideal gases in terms of kinetic molecular theory?
Ideal gas particles are small compared to the space between them.
Particles must not be able to move in any fixed or open container.
Their collisions must be elastic and versatile.
There are no significant interactions among the particles of a gas.
Answer:
2nd option is NOT a postulate of kinetic theory of gases
Explanation:
actually particles move in straight random motion and create bombardment with the molecules and container
g Calculate the moles of methanol in a first distillate that has a total volume of 0.5 mL and contains 23.4% methanol. The density of methanol is 0.791 g/mL, and the molar weight of methanol is 32.04 g/mol. 2.9 x10-3 mol Methanol 9.3 x10-3 mol Methanol 1.17 x 10-2 mol Methanol None of the above
Answer:
2.9 × 10⁻³ mol
Explanation:
Step 1: Calculate the volume of methanol
0.5 mL of distillate contains 23.4% methanol.
0.5 mL × 23.4% = 0.117 mL
Step 2: Calculate the mass corresponding to 0.117 mL of methanol
The density of methanol is 0.791 g/mL.
0.117 mL × 0.791 g/mL = 0.0925 g
Step 3: Calculate the moles corresponding to 0.0925 g of methanol
The molar weight of methanol is 32.04 g/mol.
0.0925 g × 1 mol/32.04 g ≈ 2.9 × 10⁻³ mol
The pKa of a certain weak acid is 5.0. Calculate the ratio of proton acceptor to proton donor at pH 7.0.
A) 1000:1
B) 20:1
C) 100:1
D) 40:1
Answer:
C) 100:1
Explanation:
To solve this question we must use H-H equation:
pH = pKa + log [A-] / [HA]
Where pH = 7.0, pKa = 5.0, A- is proton aceptor and HA proton donor.
Replacing:
7 = 5 + log [A-] / [HA]
2 = log [A-] / [HA]
100 = [A-] / [HA]
That means the ratio of proton aceptor:proton donor is:
C) 100:1
Which formula represents a ketone?
A. CH3COCH
B.C2H5COOCH3
C. C2H5COOH
D. CH3CHO
Answer:
The simplest ketone is acetone (R = R' = methyl), with the formula CH3COCH3
CH₃COCH represent a ketone.
Hence, Option (A) is correct answer.
What is Ketone ?A ketone is functional group which contains the carbonyl group that is -C = O. The structure for ketone is R¹ - C = O - R² where R¹ and R² are alkyl group or aryl group.
Now lets check all options one by one
Option (A): CH₃COCH
CH₃COCH contains the carbonyl group with alkyl/aryl group. So it represent a ketone.
So, it is correct option.
Option (B): C₂H₅COOCH₃
C₂H₅COOCH₃ contain a -COOR which is a functional group of ester. So it does not represent a ketone.
So, it is incorrect option.
Option (C): C₂H₅COOH
C₂H₅COOH contain carboxylic group. So it does not represent a ketone.
So, it is incorrect option.
Option (D): CH₃CHO
CH₃CHO contain aldehyde group. So it does not represent a ketone.
So, it is incorrect option.
Thus, from above conclusion we can say that CH₃COCH represent a ketone.
Hence, Option (A) is correct answer.
Learn more about the Ketone here: brainly.com/question/18433258
#SPJ2
What is AH°f for CO in the following reactions? 2 CO (g) + O2(g) → 2 CO2 (g) AH rxn 564 kJ/mol Given the values of AHF for CO2 is -393 kJ/mol
Explanation:
hi If u don't mind can u plz send a picture as it don't make sense for what is the data given e.g CO
Based on a specific example of titration method. How do titration methods play a role in agriculture industry?
Answer:
Titration is an analytical technique that is widely used in the food industry. It allows food manufacturers to determine the quantity of a reactant in a sample. For example, it can be used to discover the amount of salt or sugar in a product or the concentration of vitamin C or E, which has an effect on product colour.
Answer:
How is titration used in the industry?
Titration is an analytical technique that is widely used in the food industry. It allows food manufacturers to determine the quantity of a reactant in a sample. For example, it can be used to discover the amount of salt or sugar in a product or the concentration of vitamin C or E, which has an effect on product colour.
What volume of water must be added to 10.5 mL of a pH 2.0 solution of HNO3 in order to change the pH to 4.0 g
Answer:
[tex]V'=1040ml[/tex]
Explanation:
From the question we are told that:
Initial Volume [tex]V_1=10.5mL[/tex]
Initial Aciditity of [tex]HN0_3 pH_1=2.0g[/tex]
Finial Aciditity of [tex]HN0_3 pH_2=4.0g[/tex]
Generally the equation for Acidity &Volume Relationship is mathematically given by
[tex]N_1V_1=N_2V_2[/tex]
Therefore
[tex]V_2=\frac{N_1V_2}{N_2}[/tex]
[tex]V_2=\frac{10^{-2}*10.5}{10^{-4}}V_2=1050ml[/tex]
Therefore
Change in Water volume is
[tex]V'=V_2-V_1[/tex]
[tex]V'=1050ml-10ml[/tex]
[tex]V'=1040ml[/tex]
What is the molar mass of a substance
A) the mass in grams of one mole of a substance
B) the number of particles in one gram of a substance
C) the number of moles in one gram of a substance
D) the mass in grams of one particle of a substance
thank you :)
Answer:
A) the mass in grams of one mole of a substance.
Explanation:
The molar mass of a substance is the mass in grams of 1 mole of the substance. As shown in this video, we can obtain a substance's molar mass by summing the molar masses of its component atoms. We can then use the calculated molar mass to convert between mass and number of moles of the substance.
Please help me out for this question.
Answer:
I wish i could help but I don't understand it .so maybe someone can come and help u
Answer:
b
Explanation:
does a negative exponent mean that the number is less than 1 yes or no
Answer:
When a number is written in scientific notation, the exponent tells you if the term is a large or a small number. A positive exponent indicates a large number and a negative exponent indicates a small number that is between 0 and 1.