A stone is thrown horizontally with an initial speed of 10m/s from the edge of the cliff. A stop watch measures the stone’s trajectory with time from the top of the hill to the bottom to be 6.7s. What is the height of the cliff?

Answer:

40

Explanation:

Answer:

[tex]\mu_{s} = 3.071[/tex]

This result represents an absurd, not plausible, as coefficient of frictions from materials have values between 0 and 1.

Explanation:

From Second Newton's Law we understand that centripetal acceleration experimented by motocyclist is due to force derived from static friction. And normal force of the ground on motocyclist equals weight of motocyclist due to the flatness of circular turn. The equations of equilibrium of the motocyclist is:

[tex]\Sigma F_{x} = \mu_{s}\cdot N = m\cdot \frac{v^{2}}{R}[/tex] (Eq. 1)

[tex]\Sigma F_{y} = N-m\cdot g = 0[/tex] (Eq. 2)

Where:

[tex]\mu_{s}[/tex] - Static coefficient of friction, dimensionless.

[tex]N[/tex] - Normal force, measured in newtons.

[tex]m[/tex] - Mass of the motocyclist, measured in kilograms.

[tex]g[/tex] - Gravitational acceleration, measured in meters per square second.

[tex]v[/tex] - Speed of the motorcyclist, measured in meters per second.

[tex]R[/tex] - Radius of the circular turn, measured in meters.

The static coefficient of friction is cleared in (Eq. 1):

[tex]\mu_{s} = \frac{m\cdot v^{2}}{N\cdot R}[/tex]

From (Eq. 2) we get that normai force is:

[tex]N = m\cdot g[/tex]

And we expand the resulting expression in (Eq. 1):

[tex]\mu_{s} = \frac{m\cdot v^{2}}{m\cdot g\cdot R}[/tex]

[tex]\mu_{s} = \frac{v^{2}}{g\cdot R}[/tex] (Eq. 3)

If we know that [tex]v = 30.556\,\frac{m}{s}[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex] and [tex]R = 31\,m[/tex], the expected static coefficient of friction is:

[tex]\mu_{s} = \frac{\left(30.556\,\frac{m}{s} \right)^{2}}{\left(9.807\,\frac{m}{s^{2}} \right)\cdot (31\,m)}[/tex]

[tex]\mu_{s} = 3.071[/tex]

This result represents an absurd, not plausible, as coefficient of frictions from materials have values between 0 and 1.

The answer is A I Hope this answer helps you (i got the question right)

Answer:

A. As speed increases, kinetic energy increases exponentially.

Explanation:

The amount of kinetic energy an object has depends on the speed. Kinetic energy is also known as "motion energy." This being said, if speed is increasing, decreasing, or staying constant, the kinetic energy of the object will too.

Answer:

luster

Explanation:

Answer:

What do you mean ma´am/sir?

Explanation:

Answer:

b

Explanation:

Complete Question

The complete question is shown on the first uploaded image

Answer:

The correct option is  B

Explanation:

   The number  of alphabet is  n= 4  (a , b , c , d )

Generally the total  number of  string of length 10 over the 4 alphabets is  

     [tex]N  =  4^{10}[/tex]

Gnerally the number of string of length 10 that does not include b is  

     [tex]T =  3^{10}[/tex]    

Generally the number of strings of length 10 over the 4  alphabets that have at least one alphabet b  somewhere in the string is  

        [tex]G  =  N - T[/tex]

=>    [tex]G  =  4^{10} -  3^{10}[/tex]

Answer:

m₁ = 70 lb

Explanation:

Here we will use the law of conservation of momentum:

m₁u₁ + m₂u₂ + m₃u₃ = m₁v₁ + m₂v₂ + m₃v₃

where,

m₁ = mass of first suitcase = ?

m₂ = mass of second suitcase = 30 lb

m₃ = mass of baggage carrier = 50 lb

u₁ = initial speed of first suitcase = 7.2 ft/s

u₂ = initial speed of second suitcase = 7.2 ft/s

u₃ = initial speed of baggage carrier = 0 ft/s

v₁ = Final speed of first suitcase = 4.8 ft/s

v₂ = Final speed of second suitcase = 4.8 ft/s

v₃ = Final speed of baggage carrier = 4.8 ft/s

because after collision all three will have same speed

Therefore,

(m₁)(7.2 ft/s) + (30 lb)(7.2 ft/s) + (50 lb)(0 ft/s) = (m₁)(4.8 ft/s) + (30 lb)(4.8 ft/s) + (50 lb)(4.8 ft/s)

(m₁)(7.2 ft/s) + (216 lb ft/s) + (0 lb ft/s) = (m₁)(4.8 ft/s) + (144 lb ft/s) + (240 lb ft/s)

(m₁)(7.2 ft/s) - (m₁)(4.8 ft/s) = 168 lb ft/s

m₁ = (168 lb ft/s)/(2.4 ft/s)

m₁ = 70 lb

Answer:

True.

Explanation:

        [tex]v_{avg} = \frac{\Delta x}{\Delta t}[/tex] (1)

        [tex]\Delta x} = v_{avg}* {\Delta t}[/tex]

Answer:

The force is [tex]F_b =  216 \  N [/tex]

Explanation:

From the question we are told that

   The  mass of the bungee jumper is  m  = 80 kg

    The spring constant is  [tex]k = 20 \ N/ m[/tex]

    The extension of the rubber bungee cords is  x = 50 m

Generally the weight of the jumper is

      [tex]W =  m *  g[/tex]

=>   [tex]W =  80 *  9.8 [/tex]

=>   tex]W =  784  \  N  [/tex]

Generally  the returning force of the rubber bungee cords is mathematically represented as

      [tex]F  =  k  *  x[/tex]

=>     [tex]F  =  20   * 50 [/tex]

=>     [tex]F  =  1000 \  N [/tex]

The force to be applied by the bear is

    [tex]F_b =  F -  W[/tex]

=>    [tex]F_b =  100 -  784[/tex]

=>  [tex]F_b =  216 \  N [/tex]

Answer:

A.No. Assuming no other factors (such as air resistance) the first object will have a velocity of 32 feet/second when the other is dropped. Since they will both have the same acceleration, the first distance between them will increase by 32 feet per second.

Explanation:

Answer:

4 bobux

Explanation:

one bobux

two bobux

three bobux

four bobux

Answer:

hi

Explanation:

hiijjjjjjjjjjjjjjj

Answer:They have made community members shareholders so they get a share of the profits, which they use for schools and healthcare clinics

Explanation: Edmentum

Answer:

shareholders of the community get profits and that is used for schools and healthcare clinics. cs. 

Explanation:

Answer:

1,839.375 Joules

Explanation:

Work is said to be done is the force applied to an object cause the object to move through a distance.

Workdone = Force * Distance

Workdone = mass * acceleration due to gravity * distance

Given

Mass = 75.0kg

acceleration due to gravity = 9.81m/s²

distance = 2.50m

Substitute the given parameters into the formula:

Workdone = 75.0*9.81*2.50

Workdone = 1,839.375Joules

Hence the workdone is 1,839.375 Joules

Answer:

t = 5.77 s

Explanation:

This exercise will use Newton's second law for rotational motion

            τ = I α

             α = τ / I

             α = 66/175

             α = 0.3771   rad/s²

now we can use the rotational kinematics relations, remember that all angles must be in radians

            θ = 1 rev = 2π radians

            θ = w₀ t + ½ α t²

as the wheel starts from rest w₀ = 0

             t = √ (2θ/α)

let's calculate

             t = √ (2 2π / 0.3771)

             t = 5.77 s

Answer:

3.2

Explanation:

I hope that this helps! Have a good day!!

Answer:

In two significant figure 360K

Explanation:

The temperature difference (ΔT) can be calculated as the boiling temperature minus the freezing temperature in Fahrenheit.

Hence,

ΔT = 212 - 32

ΔT = 180°F

To convert to °F to kelvin, we use the formula below

= (°F - 32) × 5/9 + 273.15

= (180°F - 32) × 5/9 + 273.15

= 355.37K ⇔ 360K

Answer: IM 95%sure that the answer is B jus took the test got the answer right

Explanation:

Answer:

sorry I forgot I wish I could help

Answer:

The value of q is [tex]\dfrac{Q}{8}[/tex]

Explanation:

Given that,

Each charge = -Q

Distance between charges = L

Reduced force = [tex]\dfrac{F}{2}[/tex]

Suppose, Two particles each with a charge -Q are fixed a distance L apart as shown above. Each particle experiences a net electric force F. A particle with a charge +q is now fixed midway between the original two particles.

We know that,

The force on each end is

[tex]F=\dfrac{kQ^2}{L^2}[/tex]...(I)

If the charge q is placed at mid point then

The  force on each end charge is

[tex]\dfrac{F}{2}=F+F'[/tex]....(II)

We need to calculate the value of q

Using equation (II)

[tex]\dfrac{F}{2}=F+F'[/tex]

Put the value of F into the formula

[tex]\dfrac{\dfrac{kQ^2}{L^2}}{2}=k\dfrac{Q^2}{L^2}+k\dfrac{q\times(-Q)}{(\dfrac{L}{2})^2}[/tex]

[tex]\dfrac{kq(-Q)}{(\dfrac{L}{2})^2}=-\dfrac{kQ^2}{2L^2}[/tex]

[tex]\dfrac{q}{\dfrac{1}{4}}=\dfrac{Q}{2}[/tex]

[tex]q=\dfrac{Q}{8}[/tex]

Hence, The value of q is [tex]\dfrac{Q}{8}[/tex]

Answer:

noun. a person who is connected with another or others by blood or marriage. something having, or standing in, some relation or connection to something else. something dependent upon external conditions for its specific nature, size, etc. (opposed to absolute).

Answer:

a- More heat is required for the constant-pressure process than for the constant-volume

Explanation:

we have to solve using the thermodynamic first law. this is the heat applied to the system

dQ = dU + dW

definition of terms:

dU = change in internal energy

dW = work done

we have it that

change in internal energy dU is directly proportional to work done dW

but when we are in constant volume process, work done of the gas is zero

therefore

dQ of constant pressure is > than that of constant volume

so constant pressure process requires more heat

The process that requires more heat is the constant-pressure process than the constant-volume process.

According to the first law of thermodynamics, the heat that's applied to the system will be the addition of the change in internal energy and the work done.

In a constant-volume process, the work done on the gas is equal to zero. More heat will be required for the constant-pressure process than for the constant-volume process.

Also, it should be noted that the change in the thermal energy of the gas will be the same for the constant-pressure process and the constant-volume process.

Read related link on:

https://brainly.com/question/16951562

Answer:

D

Explanation:

Answer:

c.4s

Explanation:

Answer and Explanation:

TL: DR The Sun is much more massive than Neptune — more than enough to make up for the somewhat smaller distance between the two planets at the closest approach.

[The surprise in this answer (to me, a non-astronomer), is that the gap between the orbits of Neptune and Uranus is large — half the distance from Uranus to the Sun.]

The ratio of gravitational attraction of the Sun on Uranus versus Neptune on Uranus is directly proportional to the ratio of the Sun’s mass to Neptune’s and inversely proportional to the ratio of the square of the distances (let’s use the closest approach of the two planets to one another to calculate a maximum attraction).

Numbers:

Sun’s mass: 2 x 10^30 kg

Neptune’s mass: 1 x 10^26 kg

Distance of Sun to Uranus: 3 x 10^9 km

Closest approach of Uranus and Neptune: 1.5 x 10^9 km

Without doing any arithmetic, we see that even at their closest approach, Uranus and Neptune are separated by about one-half of the Uranus to Sun distance. Squaring that ratio, we see that if the Sun and Neptune had the same mass, the attraction between the Sun and Uranus would only be about 1/4 of that between the Sun and Neptune; however, the Sun has 20000 times the mass of Neptune, so the attraction between Uranus and the Sun is about 5000 times stronger than the maximum attraction between Uranus and Neptune.

The explanation of the possibility of why sun exerts a greater force on Uranus than Neptune exerts on Uranus is; because the force was calculated to be greater.

The formula for calculating the Force of Gravity between two masses is:

F = G*m₁*m₂/r²

Where;

F = force of gravity

G = gravitational constant = 6.674 × 10⁻¹¹ N•m²/kg²

m₁ = mass of the larger object

m₂ = mass of the smaller object

r = the distance between the centers of the two masses

Now, from online values, we have the following;

mass of Neptune; m₁ =  102.413 × 10²⁴ kg

mass of Uranus; m₂ = 86.813 × 10²⁴ kg

average distance between the centers of Neptune and Uranus; r = 1.62745 × 10¹² m

Thus, force exerted by Neptune on Uranus is;

F = (6.674 × 10⁻¹¹ × 102.413 × 10²⁴ × 86.813 × 10²⁴)/(1.62745 × 10¹²)²

F = 2.240 × 10¹⁷ N

We are told that the force the Sun exerts on Uranus is 1.41 the force the Sun exerts on Uranus is 1.41 × 10²¹ N.

That is greater than the force Neptune exerts on Uranus.

Read more about Force of Gravity at; https://brainly.com/question/7281908

Answer:

The region where an electron is most likely to be is called an orbital. Each orbital can have at most two electrons. Some orbitals, called S orbitals, are shaped like spheres, with the nucleus in the center.

Explanation:Hope this helps :)

By definition, a region around the nucleus of an atom where electrons are likely to be found​ is called an orbital.

First of all, an atom is the smallest constituent unit of ordinary matter that has the properties of a chemical element.

All atoms are made up of subatomic particles: protons and neutrons, which are part of their nucleus, and electrons, which revolve around them. Protons are positively charged, neutrons are neutrally charged, and electrons are negatively charged.

In other words, every atom consists of a nucleus in which neutrons and protons meet and energy levels where electrons are located.

This is, the atomic nucleus is the central part of the atom that is made up of protons and neutrons, while the orbitals or peripheral region is an area where electrons are found.

In summary, a region around the nucleus of an atom where electrons are likely to be found​ is called an orbital.

Learn more:

Answer:

La aceleración necesaria para detener el avión es - 10.42 m/s².

Explanation:

Un movimiento uniformemente acelerado (M.U.A) es aquél cuya aceleración es constante y la velocidad de un objeto cambia a medida que el movimiento evoluciona.

Siendo la aceleración "a" el cambio de velocidad al tiempo transcurrido en un punto A a B, la velocidad inicial la velocidad que tiene un cuerpo al iniciar su movimiento en un período de tiempo y la velocidad final la velocidad que tiene un cuerpo al finalizar su movimiento en un período de tiempo, entonces en  M.U.A se cumple:

Vf² - Vo² = 2*a*d

donde:

En este  caso:

Reemplazando:

(0 m/s)² - (50 m/s)² = 2*a*120 m

Resolviendo:

[tex]a=\frac{(0 m/s)^{2} -(50 m/s)^{2} }{2*120 m}[/tex]

a= - 10.42 m/s²

La aceleración necesaria para detener el avión es - 10.42 m/s².

Answer:

Explanation:

The work done by an object can be found by using the formula

From the question

force = 290 N

distance = 5 m

We have

workdone = 290 × 5

We have the final answer as

Hope this helps you

Answer:

The correct answer is A. A government that wants to increase its GDP would most likely increase the money supply to make it easier to borrow money.

Explanation:

If the government wanted to increase its GDP, the most appropriate way to do so would be to increase the money supply both through issuance and through a reduction in bank reserve requirements, thereby increasing the circulating money in the hands of society.

This, in turn, would make citizens reinvest that money, increasing economic production and, therefore, the national GDP.

Answer: A. Increase the money supply to make it easier to borrow money

Explanation: I just took the test on Ap ex