A spring is 17.8 cm long when it is lying on a table. One end is then attached to a hook and the other end is pulled by a force that increases to 27.0 N, causing the spring to stretch to a length of 19.5 cm. What is the force constant of this spring?

The magnitude of acceleration is given by the absolute value of Acceleration.

Given:

Initial Velocity,

u = 13.0 m/s

Final Velocity,

v = 10.6 m/s

Time Taken,

t = 3.40s

Acceleration of the bird is given as:

Acceleration,

a = (v - u)/t

Taking values from above,

a = (10.6 - 13)/3.40s = -0.794 m/s² (acceleration is in the opposite direction of velocity as the bird slows down)

:|a| = |-0.794| = 0.794 m/s²

The direction of the bird's acceleration is in the opposite direction of velocity,

South.

To calculate the velocity after an additional 2.70 s has elapsed,

we use the formula:

Final Velocity,

v = u + at Taking values from the problem,

u = 13.0 m/s

a = -0.794 m/s² (same as part a)

v = ?

t = 2.70 s

Substituting these values in the above formula,

v = 13.0 - 0.794 × 2.70s = 10.832 m/s

The final velocity of the bird after 2.70s has elapsed is 10.832 m/s.

The direction is still North.

To know more about Acceleration visit:

https://brainly.com/question/19537384

#SPJ11

The correct option is "Act as a diverging".

Detail Answer:When a spherical bubble of air is formed in water, it behaves as a diverging lens. As it is a lens made of a convex shape, it diverges the light rays that come into contact with it. Therefore, a spherical bubble of air in water will act as a diverging lens.Lens is a transparent device that is used to refract or bend light.

                                There are two types of lenses, i.e., convex and concave. Lenses are made from optical glasses and are of different types depending upon their applications.Lens works on the principle of refraction, and it refracts the light when the light rays pass through it. The lenses have an axis and two opposite ends.

                                            The lens's curved surface is known as the radius of curvature, and the center of the lens is known as the optical center . The type of lens depends upon the curvature of the surface of the lens. The lens's curvature surface can be either spherical or parabolic, depending upon the type of lens.

Learn more about diverging lens.

brainly.com/question/28348284

#SPJ11

The kinetic energy at one-third of the maximum velocity is KE = (1/9)(6 J) = 0.67 J, rounded to the hundredth place.

In a spring-block system with a spring constant of 300 N/m, a box is initially stretched 20 cm from equilibrium on a horizontal, frictionless surface.

The box is released at t = 0 s. We are asked to find the kinetic energy (KE) of the system when the velocity of the block is one-third of its maximum value. The answer will be provided in joules (J) rounded to the hundredth place.

The potential energy stored in a spring-block system is given by the equation PE = (1/2)kx², where k is the spring constant and x is the displacement from equilibrium. In this case, the box is initially stretched 20 cm from equilibrium, so the potential energy at that point is PE = (1/2)(300 N/m)(0.20 m)² = 6 J.

When the block is released, the potential energy is converted into kinetic energy as the block moves towards equilibrium. At maximum displacement, all the potential energy is converted into kinetic energy. Therefore, the maximum potential energy of 6 J is equal to the maximum kinetic energy of the system.

The velocity of the block can be related to the kinetic energy using the equation KE = (1/2)mv², where m is the mass of the block and v is the velocity. Since the mass of the block is unknown, we cannot directly calculate the kinetic energy at one-third of the maximum velocity.

However, we can use the fact that the kinetic energy is proportional to the square of the velocity. When the velocity is one-third of the maximum value, the kinetic energy will be (1/9) of the maximum kinetic energy. Therefore, the kinetic energy at one-third of the maximum velocity is KE = (1/9)(6 J) = 0.67 J, rounded to the hundredth place.

Learn more about spring constant here: brainly.com/question/29975736

#SPJ11

The energy density of the magnetic field is 2.5 x 10^4 J/m³.

(a) Energy density of electric field

The energy density of the electric field is given by the formula;

u = 1/2εE²

Where

u is the energy density of the electric field,

ε is the permittivity of the medium and

E is the electric field strength.

The energy density of electric field can be computed as follows;

Given:

Electric field strength, E = 121 V/m

The electric field strength is perpendicular to the Earth's surface, which means it is acting on a vacuum where the permittivity of free space is:

ε = 8.85 x 10^-12 F/m

Therefore;

u = 1/2εE²

u = 1/2(8.85 x 10^-12 F/m)(121 V/m)²

u = 7.91 x 10^-10 J/m³

Hence, the energy density of the electric field is 7.91 x 10^-10 J/m³.

(b) Energy density of magnetic field

The energy density of the magnetic field is given by the formula;

u = B²/2μ

Where

u is the energy density of the magnetic field,

B is the magnetic field strength and

μ is the permeability of the medium.

The energy density of magnetic field can be computed as follows;

Given:

Magnetic field strength, B = 5.45 x 10⁹ T

The magnetic field strength is perpendicular to the Earth's surface, which means it is acting on a vacuum where the permeability of free space is:

μ = 4π x 10^-7 H/m

Therefore;

u = B²/2μ

u = (5.45 x 10⁹ T)²/2(4π x 10^-7 H/m)

u = 2.5 x 10^4 J/m³

Hence, the energy density of the magnetic field is 2.5 x 10^4 J/m³.

Learn more about magnetic field from this link:

https://brainly.com/question/24761394

#SPJ11

The water will flow out of the tube at a speed of 8.9 m/s.

To determine the speed at which water will flow out of the tube, we can apply the principles of fluid dynamics. The speed of fluid flow is determined by the height of the fluid above the point of discharge, and it is independent of the shape of the container. In this case, the water tower has a height of 15 m, which provides the potential energy for the flow of water.

The potential energy of the water can be calculated using the formula: Potential Energy = mass × gravity × height. Since the density of water is given as 1,000 kg/m³ and the height is 15 m, we can calculate the mass of the water in the tower as follows: mass = density × volume. The volume of the water in the tower is equal to the cross-sectional area of the tub multiplied by the height of the water column.

The cross-sectional area of the tub can be calculated using the formula: area = π × radius². Assuming the tub has a uniform circular cross-section, we need to determine the radius. The radius can be calculated as the square root of the ratio of the cross-sectional area to π. With the given information, we can find the radius and subsequently calculate the mass of the water in the tower.

Once we have the mass of the water, we can use the formula for potential energy to calculate the potential energy of the water. The potential energy is given by the equation: Potential Energy = mass × gravity × height. The potential energy is then converted to kinetic energy as the water flows out of the tube. The kinetic energy is given by the equation: Kinetic Energy = (1/2) × mass × velocity².

By equating the potential energy to the kinetic energy, we can solve for the velocity. Rearranging the equation, we get: velocity = √(2 × gravity × height). Plugging in the values of gravity (9.8 m/s²) and height (20 m), we can calculate the velocity to be approximately 8.9 m/s.

Learn more about speed

brainly.com/question/32673092

#SPJ11

The wavelength of the light falling on the slits is approximately 493 nanometers when adjacent bright fringes are separated by 2.10 mm.

To find the wavelength of the light falling on the slits, we can use the formula for the interference pattern in a double-slit experiment:

λ = (d * D) / y

where λ is the wavelength of the light, d is the separation between the slits, D is the distance between the slits and the screen, and y is the separation between adjacent bright fringes on the screen.

Given:

Separation between the slits (d) = 0.610 mm = 0.610 × 10^(-3) m

Distance between the slits and the screen (D) = 1.70 m

Separation between adjacent bright fringes (y) = 2.10 mm = 2.10 × 10^(-3) m

Substituting these values into the formula, we can solve for the wavelength (λ):

λ = (0.610 × 10^(-3) * 1.70) / (2.10 × 10^(-3))

λ = (1.037 × 10^(-3)) / (2.10 × 10^(-3))

λ = 0.4933 m

To convert the wavelength to nanometers, we multiply by 10^9:

λ = 0.4933 × 10^9 nm

λ ≈ 493 nm

Therefore, the wavelength of the light falling on the slits is approximately 493 nanometers.

To know more about bright fringes please refer:

https://brainly.com/question/29487127

#SPJ11

The specific placement of an object relative to the focal point of a lens or mirror determines the characteristics of the resulting image, such as its nature (real or virtual), size, and orientation.

Let's provide a more detailed explanation for each scenario:

3. Placing an object at the focal point of a lens:

When an object is placed exactly at the focal point of a lens, the incident rays from the object become parallel to each other after passing through the lens. This occurs because the lens refracts (bends) the incoming rays in such a way that they converge at the focal point on the opposite side. However, when the object is positioned precisely at the focal point, the refracted rays become parallel and do not converge to form a real image. Therefore, in this case, no real image is formed on the other side of the lens.

4. Placing an object at the focal point of a mirror:

If an object is positioned at the focal point of a mirror, the reflected rays will appear to be parallel to each other. This happens because the light rays striking the mirror surface are reflected in a way that they diverge as if they were coming from the focal point behind the mirror. Due to this divergence, the rays never converge to form a real image. Instead, the reflected rays appear to originate from a virtual image located at infinity. Consequently, no real image can be projected onto a screen or surface.

5. Placing an object between the focal point and the lens:

When an object is situated between the focal point and a converging lens, a virtual image is formed on the same side as the object. The image appears magnified and upright. The lens refracts the incoming rays in such a way that they diverge after passing through the lens. The diverging rays extend backward to intersect at a point where the virtual image is formed. This image is virtual because the rays do not actually converge at that point. The virtual image is larger in size than the object, making it appear magnified.

6. Placing an object between the focal point and the mirror:

Similarly, when an object is placed between the focal point and a concave mirror, a virtual image is formed on the same side as the object. The virtual image is magnified and upright. The mirror reflects the incoming rays in such a way that they diverge after reflection. The diverging rays appear to originate from a point behind the mirror, where the virtual image is formed. Again, the virtual image is larger than the object and is not a real convergence point of light rays.

In summary, the placement of an object relative to the focal point of a lens or mirror determines the behavior of the light rays and the characteristics of the resulting image. These characteristics include the nature of the image (real or virtual), its size, and its orientation (upright or inverted).

Note: In both cases (5 and 6), the images formed are virtual because the light rays do not actually converge or intersect at a point.

To learn more about focal point, Visit:

https://brainly.com/question/30761313

#SPJ11

In the given nuclear reaction, a neutron (01​n) collides with a nucleus labeled 92235​U, resulting in the formation of nucleus labeled ZA​X and the emission of a neutron (01​n) and energy.

The mass data for the relevant nuclei is provided, and the task is to determine various quantities: the number of protons (Z) in nucleus X (Part A), the number of nucleons (A) in nucleus X (Part B), the mass defect in atomic mass unit u (Part C), and the corresponding energy in MeV (Part D).

Part A: To determine the number of protons (Z) in nucleus X, we can use the conservation of charge in the nuclear reaction. Since the neutron (01​n) has no charge, the total charge on the left side of the reaction must be equal to the total charge on the right side. Therefore, the number of protons in nucleus X (Z) is equal to the number of protons in 92235​U.

Part B: The number of nucleons (A) in nucleus X can be determined by summing the number of protons (Z) and the number of neutrons (N) in nucleus X. Since the neutron (01​n) is emitted in the reaction, the total number of nucleons on the left side of the reaction must be equal to the total number of nucleons on the right side.

Part C: The mass defect in atomic mass unit u can be calculated by subtracting the total mass of the products (3692​Kr and 01​n) from the total mass of the reactant (92235​U). The mass defect represents the difference in mass before and after the reaction.

Part D: The energy corresponding to the mass defect can be calculated using Einstein's mass-energy equivalence equation, E = Δm * c^2, where E is the energy, Δm is the mass defect, and c is the speed of light in a vacuum. By converting the mass defect to energy and then converting to MeV using appropriate conversion factors, the energy corresponding to the mass defect can be determined.

Learn more about nuclear reaction here: brainly.com/question/13090058

#SPJ11

When comparing the radiation power loss for electrons (Pe) and protons (Pp) in a synchrotron, the correct answer is 2- Pe << Pp. This means that the radiation power loss for electrons is much smaller than that for protons.

The radiation power loss in a synchrotron occurs due to the acceleration of charged particles. It depends on the mass and charge of the particles involved.

Electrons have a much smaller mass compared to protons but carry the same charge. Since the radiation power loss is proportional to the square of the charge and inversely proportional to the square of the mass, the power loss for electrons is significantly smaller than that for protons.

Therefore, option 2- Pe << Pp is the correct choice, indicating that the radiation power loss for electrons is much smaller compared to that for protons in a synchrotron.

Learn more about synchrotron here:

brainly.com/question/31070723

#SPJ11

In partial wave analysis, the S-wave scattering phase shift is all we need to analyze low-energy scattering. At low energies, the wavelength is large, which makes the effect of higher partial waves to be minimal.

In partial wave analysis, the S-wave scattering phase shift is all we need to analyze low-energy scattering. The reason why the higher partial waves tend not to contribute to scattering at this limit is due to the following reasons:

The partial wave expansion of a scattering wavefunction involves the summation of different angular momentum components. In scattering problems, the energy is proportional to the inverse square of the wavelength of the incoming particles.

Hence, at low energies, the wavelength is large, which makes the effect of higher partial waves to be minimal. Moreover, when the incident particle is scattered through small angles, the dominant contribution to the cross-section comes from the S-wave. This is because the higher partial waves are increasingly suppressed by the centrifugal barrier, which is proportional to the square of the distance from the nucleus.

In summary, the contribution of higher partial waves tends to be negligible in the analysis of low-energy scattering. In such cases, we can get an accurate description of the scattering process by just considering the S-wave phase shift. This reduces the complexity of the analysis and simplifies the interpretation of the results.

This phase shift contains all the relevant information about the interaction potential and the scattering properties. The phase shift can be obtained by solving the Schrödinger equation for the potential and extracting the S-matrix element. The S-matrix element relates the incident and scattered waves and encodes all the scattering information. A simple way to extract the phase shift is to analyze the behavior of the wavefunction as it approaches the interaction region.

Learn more About S-wave from the given link

https://brainly.com/question/30540515

#SPJ11

a. A single electron loses 6.408 × 10⁻¹⁵ J of potential energy.

b. The maximum speed of the electrons is 8.9 × 10⁶ m/s.

a. The potential energy lost by a single electron can be calculated using the equation for electric potential energy:

ΔPE = qΔV, where ΔPE is the change in potential energy, q is the charge of the electron (1.6 × 10⁻¹⁹ C), and ΔV is the change in voltage (40,000 V). Plugging in the values,

we get ΔPE = (1.6 × 10⁻¹⁹ C) × (40,000 V)

                    = 6.4 × 10⁻¹⁵ J.

b. To determine the maximum speed of the electrons, we can equate the loss in potential energy to the gain in kinetic energy.

The kinetic energy of an electron is given by KE = ½mv²,

where m is the mass of the electron (9.1 × 10⁻³¹ kg) and v is the velocity. Equating ΔPE to KE, we have ΔPE = KE.

Rearranging the equation, we get

(1.6 × 10⁻¹⁹ C) × (40,000 V) = ½ × (9.1 × 10⁻³¹ kg) × v².

Solving for v, we find

v = √((2 × (1.6 × 10⁻¹⁹ C) × (40,000 V)) / (9.1 × 10⁻³¹ kg))

  = 8.9 × 10⁶ m/s.

Learn more About electron from the given link

https://brainly.com/question/25674345

#SPJ11

The time constant of the R−C circuit is 132.98 ms.

1: In an R−C circuit, the resistance is 115Ω and capacitance is 28μF.

The time constant of the R−C circuit is given as:

Time Constant (τ) = RC

where

R = Resistance

C = Capacitance= 115 Ω × 28 μ

F= 3220 μs = 3.22 ms

Therefore, the time constant of the R−C circuit is 3.22 ms.

2: In an R−C circuit, the resistance

R = 5 kΩ, Capacitor

C1 = 6 mF and

Capacitor C2 = 10 mF.

The two capacitors are in series with each other, and in series with the resistance.

The total capacitance in the circuit will be

CT = C1 + C2= 6 mF + 10 mF= 16 mF

The equivalent capacitance for capacitors in series is:

1/CT = 1/C1 + 1/C2= (1/6 + 1/10)×10^-3= 0.0267×10^-3F = 26.7 µF

The total resistance in the circuit is:

R Total = R + R series

The resistors are in series, so:

R series = R= 5 kΩ

The time constant of the R−C circuit is given as:

Time Constant (τ) = RC= (5×10^3) × (26.7×10^-6)= 0.1335 s= 133.5 ms

Therefore, the time constant of the R−C circuit is 133.5 ms.

3: In an R−C circuit, the resistance

R = 6 kΩ,

Capacitor C1 = 7 mF, and

Capacitor C2 = 7 mF.

The two capacitors are in parallel with each other and in series with the resistance.

The equivalent capacitance for capacitors in parallel is:

CT = C1 + C2= 7 mF + 7 mF= 14 mF

The total capacitance in the circuit will be:

C Total = CT + C series

The capacitors are in series, so:

1/C series = 1/C1 + 1/C2= (1/7 + 1/7)×10^-3= 0.2857×10^-3F = 285.7 µFC series = 1/0.2857×10^-3= 3498.6 Ω

The total resistance in the circuit is:

R Total = R + C series= 6 kΩ + 3498.6 Ω= 9498.6 Ω

The time constant of the R−C circuit is given as:

Time Constant (τ) = RC= (9.4986×10^3) × (14×10^-6)= 0.1329824 s= 132.98 ms

Therefore, the time constant of the R−C circuit is 132.98 ms.

To know more about R−C circuit visit:

https://brainly.com/question/32250409

#SPJ11

A particle that vibrates 5 times a second and advances energy 50 cm per vibration will create a wave with a wavelength of 10 cm and the wave speed is 0.5 m/s

Therefore, the speed of the wave can be calculated using the following formula:

Wave speed = frequency x wavelength

Substituting in the values gives:

Wave speed = 5 x 10 cm/s = 50 cm/s = 0.5 m/s. Therefore, the answer is option D (0.5 m/s).

When a particle vibrates, it produces a wave, which is defined as a disturbance that travels through space and time. The wave has a certain speed, frequency, and wavelength. The wave speed refers to the distance covered by the wave per unit time. It is determined by multiplying the frequency by the wavelength.

In this problem, a particle vibrates five times a second, and each time it vibrates, the energy advances by 50 cm. The question is to determine the wave speed of the particle's vibration. To determine the wave speed, we need to use the following formula:

Wave speed = frequency x wavelengthThe frequency of the particle's vibration is 5 Hz, and the distance advanced by the energy per vibration is 50 cm. Therefore, the wavelength can be calculated as follows:

Wavelength = distance/number of vibrations = 50 cm/5 = 10 cm.

Substituting these values into the formula for wave speed, we get:

Wave speed = 5 x 10 cm/s = 50 cm/s = 0.5 m/sTherefore, the wave speed of the particle's vibration is 0.5 m/s.

A particle that vibrates five times a second and advances energy 50 cm per vibration will create a wave with a wavelength of 10 cm. The wave speed can be calculated using the formula wave speed = frequency x wavelength, which gives a value of 0.5 m/s.

To know more about frequency visit

brainly.com/question/29739263

#SPJ11

For an isothermal expansion of an ideal gas, the change in internal energy is zero. In this case, the gas performs 5.00×10^3 J of work, and the heat absorbed during the expansion is also 5.00×10^3 J.

An isothermal process involves a change in a system while maintaining a constant temperature. In this case, an ideal gas is expanding isothermally and performing work. We need to calculate the change in internal energy of the gas and the heat absorbed during the expansion.

To calculate the change in internal energy (ΔU) of the gas, we can use the first law of thermodynamics, which states that the change in internal energy is equal to the heat (Q) absorbed or released by the system minus the work (W) done on or by the system. Mathematically, it can be represented as:

ΔU = Q - W

Since the process is isothermal, the temperature remains constant, and the change in internal energy is zero. Therefore, we can rewrite the equation as:

0 = Q - W

Given that the work done by the gas is 5.00×10^3 J, we can substitute this value into the equation:

0 = Q - 5.00×10^3 J

Solving for Q, we find that the heat absorbed during this expansion is 5.00×10^3 J.

To know more about the first law of thermodynamics, refer here:

https://brainly.com/question/32101564#

#SPJ11

a. 1 kg of steam has the larger entropy. b. 2 kg of water at 20°C has the larger entropy. c. 1 kg of water at 50°C has the larger entropy. d. 1 kg of steam (H2O) at 200°C has the larger entropy.

Thus, the answers to the question are:

a. 1 kg of steam has a larger entropy.

b. 2 kg of water at 20°C has a larger entropy.

c. 1 kg of water at 50°C has a larger entropy.

d. 1 kg of steam (H₂0) at 200°C has a larger entropy.

Student 1 thinks that 1 kg of steam and 1 kg of hydrogen and oxygen atoms that make up the steam should have the same entropy because they have the same temperature and amount of stuff. Student 2, on the other hand, thinks that if there are more particles moving around, there should be more disorder, indicating that its entropy should be higher.I agree with student 2's reasoning. Entropy is directly related to the disorder of a system. Higher disorder indicates a higher entropy value, whereas a lower disorder implies a lower entropy value. When there are more particles present in a system, there is a greater probability of disorder, which results in a higher entropy value.

To know more about entropy:

https://brainly.com/question/20166134

#SPJ11

a) The magnitude of the tangential acceleration of the bug on the rim of the disk is approximately 1.209 m/s².

b) The magnitude of the tangential velocity of the bug when the disk is at its final speed is approximately 2.957 m/s.

c) One second after starting from rest, the magnitude of the tangential acceleration of the bug is approximately 1.209 m/s².

d) One second after starting from rest, the magnitude of the centripetal acceleration of the bug is approximately 1.209 m/s².

e) One second after starting from rest, the magnitude of the total acceleration of the bug is approximately 1.710 m/s².

To solve the problem, we need to convert the given quantities to SI units.

Given:

Diameter of the disk = 11.5 inches = 0.2921 meters (1 inch = 0.0254 meters)

Angular speed (ω) = 79.0 rev/min

Time (t) = 3.80 s

(a) Magnitude of tangential acceleration (at):

We can use the formula for angular acceleration:

α = (ωf - ωi) / t

where ωf is the final angular speed and ωi is the initial angular speed (which is 0 in this case).

Since we know that the disk accelerates uniformly from rest, the initial angular speed ωi is 0.

α = ωf / t = (79.0 rev/min) / (3.80 s)

To convert rev/min to rad/s, we use the conversion factor:

1 rev = 2π rad

1 min = 60 s

α = (79.0 rev/min) * (2π rad/rev) * (1 min/60 s) = 8.286 rad/s²

The tangential acceleration (at) can be calculated using the formula:

at = α * r

where r is the radius of the disk.

Radius (r) = diameter / 2 = 0.2921 m / 2 = 0.14605 m

at = (8.286 rad/s²) * (0.14605 m) = 1.209 m/s²

Therefore, the magnitude of the tangential acceleration of the bug on the rim of the disk is approximately 1.209 m/s².

(b) Magnitude of tangential velocity (v):

To calculate the tangential velocity (v) at the final speed, we use the formula:

v = ω * r

v = (79.0 rev/min) * (2π rad/rev) * (1 min/60 s) * (0.14605 m) = 2.957 m/s

Therefore, the magnitude of the tangential velocity of the bug on the rim of the disk when the disk is at its final speed is approximately 2.957 m/s.

(c) Magnitude of tangential acceleration one second after starting from rest:

Given that one second after starting from rest, the time (t) is 1 s.

Using the formula for angular acceleration:

α = (ωf - ωi) / t

where ωi is the initial angular speed (0) and ωf is the final angular speed, we can rearrange the formula to solve for ωf:

ωf = α * t

Substituting the values:

ωf = (8.286 rad/s²) * (1 s) = 8.286 rad/s

To calculate the tangential acceleration (at) one second after starting from rest, we use the formula:

at = α * r

at = (8.286 rad/s²) * (0.14605 m) = 1.209 m/s²

Therefore, the magnitude of the tangential acceleration of the bug one second after starting from rest is approximately 1.209 m/s².

(d) Magnitude of centripetal acceleration:

The centripetal acceleration (ac) can be calculated using the formula:

ac = ω² * r

where ω is the angular speed and r is the radius.

ac = (8.286 rad/s)² * (0.14605 m) = 1.209 m/s²

Therefore, the magnitude of the centripetal acceleration of the bug one second after starting from rest is approximately 1.209 m/s².

(e) Magnitude of total acceleration:

The total acceleration (a) can be calculated by taking the square root of the sum of the squares of the tangential acceleration and centripetal acceleration:

a = √(at² + ac²)

a = √((1.209 m/s²)² + (1.209 m/s²)²) = 1.710 m/s²

Therefore, the magnitude of the total acceleration of the bug one second after starting from rest is approximately 1.710 m/s².

Learn more about tangential acceleration from the link given below.

https://brainly.com/question/15743294

#SPJ4

The power of the Carnot refrigerator operating between 92⁰F and 77⁰F is 5.635 hp. The required horsepower of the air conditioner motor is 1.519 hp.

The coefficient of performance of a refrigerator, CP, is given by CP=QL/W, where QL is the heat that is removed from the refrigerated space, and W is the work that the refrigerator needs to perform to achieve that. CP is also equal to (TL/(TH-TL)), where TH is the high-temperature reservoir.

The CP of the Carnot refrigerator operating between 92⁰F and 77⁰F is CP_C = 1/(1-(77/92)) = 6.364.

Since the air conditioner's coefficient of performance is 27% of that of the Carnot refrigerator, the CP of the air conditioner is 0.27 x 6.364 = 1.721. The cooling capacity of the air conditioner is given as 4200 Btu/h.

The required motor horsepower can be obtained using the following formula:

(1.721 x 4200)/2545 = 2.84 hp. Therefore, the required horsepower of the air conditioner motor is 1.519 hp.

Learn more about Carnot refrigerator:

https://brainly.com/question/32868225

#SPJ11

Five 50 kg girls are sitting in a boat at rest. They each simultaneously dive horizontally in the same direction at -2.5 m/s from the same side of the boat. The empty boat has a speed of 0.15 m/s afterwards.

a. A conservation of momentum equation is:

Final momentum = (mass of the boat + mass of the girls) * velocity of the boat

b. The mass of the boat is -250 kg.

c. Type of collision is inelastic.

a. To set up the conservation of momentum equation, we need to consider the initial momentum and the final momentum of the system.

The initial momentum is zero since the boat and the girls are at rest.

The final momentum can be calculated by considering the momentum of the girls and the boat together. Since the girls dive in the same direction with a velocity of -2.5 m/s and the empty boat moves at 0.15 m/s in the same direction, the final momentum can be expressed as:

Final momentum = (mass of the boat + mass of the girls) * velocity of the boat

b. Using the conservation of momentum equation, we can solve for the mass of the boat:

Initial momentum = Final momentum

0 = (mass of the boat + 5 * 50 kg) * 0.15 m/s

We know the mass of each girl is 50 kg, and there are five girls, so the total mass of the girls is 5 * 50 kg = 250 kg.

0 = (mass of the boat + 250 kg) * 0.15 m/s

Solving for the mass of the boat:

0.15 * mass of the boat + 0.15 * 250 kg = 0

0.15 * mass of the boat = -0.15 * 250 kg

mass of the boat = -0.15 * 250 kg / 0.15

mass of the boat = -250 kg

c. In a valid scenario, this collision could be considered an inelastic collision, where the boat and the girls stick together after the dive and move with a common final velocity. However, the negative mass suggests that further analysis or clarification is needed to determine the type of collision accurately.

To know more about direction here

https://brainly.com/question/32262214

#SPJ4

The complete question is:

Five 50 kg girls are sitting in a boat at rest. They each simultaneously dive horizontally in the same direction at -2.5 m/s from the same side of the boat. The empty boat has a speed of 0.15 m/s afterwards.

a. setup a conservation of momentum equation.

b. Use the equation above to determine the mass of the boat.

c. What type of collision is this?

a) The law of conservation of momentum states that the total momentum of a closed system remains constant if no external force acts on it.

The initial momentum is zero. Since the boat is at rest, its momentum is zero. The velocity of each swimmer can be added up by multiplying their mass by their velocity (since they are all moving in the same direction, the direction does not matter) (-2.5 m/s). When they jumped, the momentum of the system remained constant. Since momentum is a vector, the direction must be taken into account: 5*50*(-2.5) = -625 Ns. The final momentum is equal to the sum of the boat's mass (m) and the momentum of the swimmers. The final momentum is equal to (m+250)vf, where vf is the final velocity. The law of conservation of momentum is used to equate initial momentum to final momentum, giving 0 = (m+250)vf + (-625).

b) vf = 0.15 m/s is used to simplify the above equation, resulting in 0 = 0.15(m+250) - 625 or m= 500 kg.

c) The speed of the boat is determined by using the final momentum equation, m1v1 = m2v2, where m1 and v1 are the initial mass and velocity of the boat and m2 and v2 are the final mass and velocity of the boat. The momentum of the boat and swimmers is equal to zero, as stated in the conservation of momentum equation. 500*0 + 250*(-2.5) = 0.15(m+250), m = 343.45 kg, and the velocity of the boat is vf = -250/(500 + 343.45) = -0.297 m/s. The answer is rounded to the nearest hundredth.

In conclusion, the mass of the boat is 500 kg, and its speed is -0.297 m/s.

Learn more about momentum

https://brainly.com/question/30677308

#SPJ11

Substituting the given values for Earth's mean radius (RE) and Earth's mass (ME), as well as the weight of the individual[tex](m1 = 760 N / 9.8 m/s^2 = 77.55 kg)[/tex], we can calculate the change in gravitational force.

To find the change in gravitational force experienced by an individual weighing 760 N at sea level compared to the force measured when on an airplane 1600 m above sea level, we can use the equation for gravitational force:

[tex]F = G * (m1 * m2) / r^2[/tex]

Where:

F is the gravitational force,

G is the gravitational constant,

and r is the distance between the centers of the two objects.

Let's denote the force at sea level as [tex]F_1[/tex] and the force at 1600 m above sea level as [tex]F_2[/tex]. The change in gravitational force (ΔF) can be calculated as:

ΔF =[tex]F_2 - F_1[/tex]

First, let's calculate [tex]F_1[/tex] at sea level. The distance between the individual and the center of the Earth ([tex]r_1[/tex]) is the sum of the Earth's radius (RE) and the altitude at sea level ([tex]h_1[/tex] = 0 m).

[tex]r_1 = RE + h_1 = 6.37 * 10^6 m + 0 m = 6.37 * 10^6 m[/tex]

Now we can calculate [tex]F_1[/tex] using the gravitational force equation:

[tex]F_1 = G * (m_1 * m_2) / r_1^2[/tex]

Next, let's calculate [tex]F_2[/tex] at 1600 m above sea level. The distance between the individual and the center of the Earth ([tex]r_2[/tex]) is the sum of the Earth's radius (RE) and the altitude at 1600 m ([tex]h_2[/tex] = 1600 m).

[tex]r_2[/tex] = [tex]RE + h_2 = 6.37 * 10^6 m + 1600 m = 6.37 * 10^6 m + 1.6 * 10^3 m = 6.3716 * 10^6 m[/tex]

Now we can calculate [tex]F_2[/tex] using the gravitational force equation:

[tex]F_2[/tex] = G * ([tex]m_1 * m_2[/tex]) /[tex]r_2^2[/tex]

Finally, we can find the change in gravitational force by subtracting [tex]F_1[/tex] from [tex]F_2[/tex]:

ΔF = [tex]F_2 - F_1[/tex]

To know more about Earth's mean radius, here

brainly.com/question/31408822

#SPJ4

The gravitational force acting on the person has decreased by 0.104 N when they are on an airplane 1600 m above sea level as compared to the force measured at sea level.

Gravitational force is given by F = G (Mm / r²), where G is the universal gravitational constant, M is the mass of the planet, m is the mass of the object, and r is the distance between the center of mass of the planet and the center of mass of the object.Given,At sea level, a person weighs 760N.

On an airplane 1600 m above sea level, the weight of the person is different. We need to calculate this difference and find the change in gravitational force.As we know, the gravitational force changes with altitude. The gravitational force acting on an object decreases as it moves farther away from the earth's center.To find the change in gravitational force, we need to first calculate the gravitational force acting on the person at sea level.

Gravitational force at sea level:F₁ = G × (Mm / R)²...[Equation 1]

Here, M is the mass of the earth, m is the mass of the person, R is the radius of the earth, and G is the gravitational constant. Putting the given values in Equation 1:F₁ = 6.674 × 10⁻¹¹ × (5.972 × 10²⁴ × 760) / (6.371 × 10⁶)²F₁ = 7.437 NNow, let's find the gravitational force acting on the person at 1600m above sea level.

Gravitational force at 1600m above sea level:F₂ = G × (Mm / (R+h))²...[Equation 2]Here, M is the mass of the earth, m is the mass of the person, R is the radius of the earth, h is the height of the airplane, and G is the gravitational constant. Putting the given values in Equation 2:F₂ = 6.674 × 10⁻¹¹ × (5.972 × 10²⁴ × 760) / (6.371 × 10⁶ + 1600)²F₂ = 7.333 NNow, we can find the change in gravitational force.ΔF = F₂ - F₁ΔF = 7.333 - 7.437ΔF = -0.104 NThe change in gravitational force is -0.104 N. A negative answer indicates a decrease in force.

Therefore, the gravitational force acting on the person has decreased by 0.104 N when they are on an airplane 1600 m above sea level as compared to the force measured at sea level.

Know more Gravitational Force

https://brainly.com/question/16613634

#SPJ11

The amplitude of the blade's simple harmonic motion is 1.0 mm (0.001 m). The maximum blade speed is approximately 0.628 m/s. The magnitude of the maximum blade acceleration is approximately 1256.64 m/s².

The amplitude, maximum blade speed, and magnitude of maximum blade acceleration in the electric shaver:

1. Amplitude (A): The amplitude of simple harmonic motion is equal to half of the total distance covered by the blade. In this case, the blade moves back and forth over a distance of 2.0 mm, so the amplitude is 1.0 mm (or 0.001 m).

2. Maximum blade speed (V_max): The maximum blade speed occurs at the equilibrium position, where the displacement is zero. The maximum speed is given by the product of the amplitude and the angular frequency (ω).

V_max = A * ω

The angular frequency (ω) can be calculated using the formula ω = 2πf, where f is the frequency. In this case, the frequency is 100 Hz.

ω = 2π * 100 rad/s = 200π rad/s

V_max = (0.001 m) * (200π rad/s) ≈ 0.628 m/s

3. Magnitude of maximum blade acceleration (a_max): The maximum acceleration occurs at the extreme positions of the motion, where the displacement is maximum. The magnitude of maximum acceleration is given by the product of the square of the angular frequency (ω^2) and the amplitude (A).

a_max = ω² * A

a_max = (200π rad/s)² * 0.001 m ≈ 1256.64 m/s²

Learn more about ”harmonic motion” here:

brainly.com/question/26114128

#SPJ11

A) The ball reaches a height of approximately 2.45 meters above the ground.

B) At the highest point, the ball is approximately 4.14 meters horizontally away from the point of release.

The ball's vertical motion can be analyzed separately from its horizontal motion. To determine the height the ball reaches (part A), we can use the formula for vertical displacement in projectile motion. The initial vertical velocity is given as 6.5 m/s * sin(57°), which is approximately 5.55 m/s. Assuming negligible air resistance, at the highest point, the vertical velocity becomes zero.

Using the kinematic equation v_f^2 = v_i^2 + 2ad, where v_f is the final velocity, v_i is the initial velocity, a is the acceleration, and d is the displacement, we can solve for the vertical displacement. Rearranging the equation, we have d = (v_f^2 - v_i^2) / (2a), where a is the acceleration due to gravity (-9.8 m/s^2). Plugging in the values, we get d = (0 - (5.55)^2) / (2 * -9.8) ≈ 2.45 meters.

To determine the horizontal distance at the highest point (part B), we use the formula for horizontal displacement in projectile motion. The initial horizontal velocity is given as 6.5 m/s * cos(57°), which is approximately 3.0 m/s. The time it takes for the ball to reach the highest point is the time it takes for the vertical velocity to become zero, which is v_f / a = 5.55 / 9.8 ≈ 0.57 seconds.

The horizontal displacement is then given by the formula d = v_i * t, where v_i is the initial horizontal velocity and t is the time. Plugging in the values, we get d = 3.0 * 0.57 ≈ 1.71 meters. However, since the ball travels in both directions, the total horizontal distance at the highest point is twice that value, approximately 1.71 * 2 = 3.42 meters.

To learn more about vertical motion, click here:

brainly.com/question/12640444

#SPJ11

At the respective distances, the magnetic field is approximate:

At r = 2 cm: 2 ×  10⁻⁵ T

At r = 4 cm: 1 ×  10⁻⁵ T

At r = 6 cm: 6.67 × 10⁻⁶ T

a) When the current density is uniform, the magnetic field at a distance r from the centre of a long cylindrical wire can be calculated using Ampere's law. For a wire with current I and radius R, the magnetic field at a distance r from the centre is given by:

B = (μ₀ × I) / (2πr),

where μ₀ is the permeability of free space (μ₀ ≈ 4π × 10⁻⁷ T m/A).

Substituting the values, we have:

1) At r = 2 cm:

B = (4π × 10⁻⁷  T m/A * 8 A) / (2π × 0.02 m)

B = (8 × 10⁻⁷ T m) / (0.04 m)

B ≈ 2 × 10⁻⁵ T

2) At r = 4 cm:

B = (4π × 10⁻⁷  T m/A * 8 A) / (2π × 0.04 m)

B = (8 × 10⁻⁷  T m) / (0.08 m)

B ≈ 1 × 10⁻⁵ T

3) At r = 6 cm:

B = (4π × 10⁻⁷  T m/A * 8 A) / (2π × 0.06 m)

B = (8 × 10⁻⁷  T m) / (0.12 m)

B ≈ 6.67 × 10⁻⁶ T

Therefore, at the respective distances, the magnetic field is approximately:

At r = 2 cm: 2 ×  10⁻⁵ T

At r = 4 cm: 1 ×  10⁻⁵ T

At r = 6 cm: 6.67 × 10⁻⁶ T

b) When the current density is non-uniform and equal to J = kr², we need to integrate the current density over the cross-sectional area of the wire to find the total current flowing through the wire. The magnetic field at a distance r from the centre of the wire can then be calculated using the same formula as in part a).

The total current (I_total) flowing through the wire can be calculated by integrating the current density over the cross-sectional area of the wire:

I_total = ∫(J × dA),

where dA is an element of the cross-sectional area.

Since the current density is given by J = kr², we can rewrite the equation as:

I_total = ∫(kr² × dA).

The magnetic field at a distance r from the centre can then be calculated using the formula:

B = (μ₀ × I_total) / (2πr),

1) At r = 2 cm:

B = (4π × 10⁻⁷ T m/A) × [(8.988 × 10⁹ N m²/C²) × (0.0016π m²)] / (2π × 0.02 m)

B = (4π × 10⁻⁷ T m/A) × (8.988 × 10⁹ N m²/C²) × (0.0016π m²) / (2π × 0.02 m)

B = (4 × 8.988 × 0.0016 × 10⁻⁷ × 10⁹ × π × π × Tm²N m/AC²) / (2 × 0.02)

B = (0.2296 * 10² × T) / (0.04)

B = 5.74 T

2) At r = 4 cm:

B = (4π × 10⁻⁷ T m/A) × (8.988 × 10⁹ N m²/C²) × (0.0016π m²) / (2π × 0.04 m)

B = (4 × 8.988 × 0.0016 × 10⁻⁷ × 10⁹ × π × π × Tm²N m/AC²) / (2 × 0.04)

B = (0.2296 * 10² × T) / (0.08)

B = 2.87 T

3) At r=6cm

B = (4π × 10⁻⁷ T m/A) × (8.988 × 10⁹ N m²/C²) × (0.0016π m²) / (2π × 0.06 m)

B = (4 × 8.988 × 0.0016 × 10⁻⁷ × 10⁹ × π × π × Tm²N m/AC²) / (2 × 0.06)

B = (0.2296 * 10² × T) / (0.012)

B = 1.91 T

c) To calculate the magnetic field at t = 0 seconds when the current is changing as a function of time (I = 0.8sin(200t)), we need to use the Biot-Savart law. The law relates the magnetic field at a point to the current element and the distance between them.

The Biot-Savart law is given by:

B = (μ₀ / 4π) × ∫(I (dl x r) / r³),

where

μ₀ is the permeability of free space,

I is the current, dl is an element of the current-carrying wire,

r is the distance between the element and the point where the magnetic field is calculated, and

the integral is taken over the entire length of the wire.

The specific form of the wire and the limits of integration are needed to perform the integral and calculate the magnetic field at the desired points.

Learn more about Magnetic Field from the given link:

https://brainly.com/question/16387830

#SPJ11

The power (in W) dissipated through the internal resistance of the cell, if it is connected to an external resistance of 1.5 Q is 4.5 W. Hence, the correct option is I. 4.5.

The expression for the power (in W) dissipated through the internal resistance of the cell, if it is connected to an external resistance of 1.5 Q is as follows:

Given :The internal resistance of a dry cell is `r = 0.5Ω`.

The electromotive force of a dry cell is `ε = 6 V`.The external resistance is `R = 1.5Ω`.Power is given by the expression P = I²R. We can use Ohm's law to find current I flowing through the circuit.I = ε / (r + R) Substituting the values of ε, r and R in the above equation, we getI = 6 / (0.5 + 1.5)I = 6 / 2I = 3 A Therefore, the power dissipated through the internal resistance isP = I²r = 3² × 0.5P = 4.5 W Therefore, the power (in W) dissipated through the internal resistance of the cell, if it is connected to an external resistance of 1.5 Q is 4.5 W. Hence, the correct option is I. 4.5.

To know more about internal resistance visit

https://brainly.com/question/23575577

#SPJ11

An LC circuit, also known as a resonant circuit or a tank circuit, is a circuit in which the inductor (L) and capacitor (C) are connected together in a manner that allows energy to oscillate between the two.

When an LC circuit has a maximum energy in the capacitor at time

t = 0,

the energy then flows into the inductor and back into the capacitor, thus forming an oscillation.

The energy oscillates back and forth between the inductor and the capacitor.

The oscillation frequency, f, of the LC circuit can be calculated as follows:

$$f = \frac {1} {2\pi \sqrt {LC}} $$

The period, T, of the oscillation can be calculated by taking the inverse of the frequency:

$$T = \frac{1}{f} = 2\pi \sqrt {LC}$$

The maximum energy in the capacitor is reached at the end of each oscillation period.

Since the period of oscillation is

T = 2π√LC,

the end of an oscillation period occurs when.

t = T.

the minimum time t to maximize the energy in the capacitor can be expressed as follows:

$$t = T = 2\pi \sqrt {LC}$$

To know more about resonant visit:

https://brainly.com/question/32273580

#SPJ11

The weight of the scaffold is 1208 N.

Given Data: Burl and Paul have a total weight of 688 N.

Tensions in the ropes that support the scaffold they stand on add to 1448 N.

Formula Used: The weight of the scaffold can be calculated by using the formula given below:

Weight of the Scaffold = Tension on Left + Tension on Right - Total Weight of Burl and Paul

Weight of the Scaffold = Tension L + Tension R - (Burl + Paul)

So the weight of the scaffold is 1208 N. (Note: Be sure to report answer with the abbreviated form of the unit.)

Learn more about Weight

https://brainly.com/question/31659519

#SPJ11

Isaac Newton's Three Laws of Motion describe the way that physical objects react to forces exerted on them. The laws describe the relationship between a body and the forces acting on it, as well as the motion of the body as a result of those forces.

Here are some examples for each of the three laws of motion:

First Law of Motion: An object at rest stays at rest, and an object in motion stays in motion at a constant velocity, unless acted upon by a net external force.

EXAMPLE: If you roll a ball on a smooth surface, it will eventually come to a stop. When you kick the ball, it will continue to roll, but it will eventually come to a halt. The ball's resistance to changes in its state of motion is due to the First Law of Motion.

Second Law of Motion: The acceleration of an object is directly proportional to the force acting on it, and inversely proportional to its mass. F = ma

EXAMPLE: When pushing a shopping cart or a bike, you must apply a greater force if it is heavily loaded than if it is empty. This is because the mass of the object has increased, and according to the Second Law of Motion, the greater the mass, the greater the force required to move it.

Third Law of Motion: For every action, there is an equal and opposite reaction.

EXAMPLE: A bird that is flying exerts a force on the air molecules below it. The air molecules, in turn, exert an equal and opposite force on the bird, which allows it to stay aloft. According to the Third Law of Motion, every action has an equal and opposite reaction.

Learn more about Law of Motion at https://brainly.com/question/28171613

#SPJ11

Resonance is a phenomenon that occurs when the frequency of a vibration of an external force matches an object's natural frequency of vibration, resulting in a dramatic increase in amplitude.

When the frequency of the external force equals the natural frequency of the object, resonance is said to occur. This results in an enormous increase in the amplitude of the object's vibration.

In other words, resonance is the tendency of a system to oscillate at greater amplitude at certain frequencies than at others. Resonance occurs when the frequency of an external force coincides with one of the system's natural frequencies.

A standing wave is a type of wave that appears to be stationary in space. Standing waves are produced when two waves with the same amplitude and frequency travelling in opposite directions interfere with one another. As a result, the wave appears to be stationary. Standing waves are found in a variety of systems, including water waves, electromagnetic waves, and sound waves.

The Doppler effect is the apparent shift in frequency or wavelength of a wave that occurs when an observer or source of the wave is moving relative to the wave source. The Doppler effect is observed in a variety of wave types, including light, water, and sound waves.

Constructive interference occurs when two waves with the same frequency and amplitude meet and merge to create a wave of greater amplitude. When two waves combine constructively, the amplitude of the resultant wave is equal to the sum of the two individual waves. When the peaks of two waves meet, constructive interference occurs.

Destructive interference occurs when two waves with the same frequency and amplitude meet and merge to create a wave of lesser amplitude. When two waves combine destructively, the amplitude of the resultant wave is equal to the difference between the amplitudes of the two individual waves. When the peak of one wave coincides with the trough of another wave, destructive interference occurs.

The resonant frequency is the frequency at which a system oscillates with the greatest amplitude when stimulated by an external force with the same frequency as the system's natural frequency. The resonant frequency of a system is determined by its mass and stiffness properties, as well as its damping characteristics.

To know more about Resonance, refer

https://brainly.com/question/29298725

#SPJ11

The impedance of the LC circuit at 55 Hz is approximately 269.68 Ω and at 5 kHz is approximately 4.43 Ω.

To find the impedance (Z) of the LC circuit at 55 Hz and 5 kHz, we can use the formula for the impedance of an LC circuit:

Z = √((R^2 + (ωL - 1/(ωC))^2))

Given:

L = 2.5 mH = 2.5 × 10^(-3) H

C = 4.5 μF = 4.5 × 10^(-6) F

1. For 55 Hz:

ω = 2πf = 2π × 55 = 110π rad/s

Z = √((0 + (110π × 2.5 × 10^(-3) - 1/(110π × 4.5 × 10^(-6)))^2))

≈ √((110π × 2.5 × 10^(-3))^2 + (1/(110π × 4.5 × 10^(-6)))^2)

≈ √(0.3025 + 72708.49)

≈ √72708.79

≈ 269.68 Ω (approximately)

2. For 5 kHz:

ω = 2πf = 2π × 5000 = 10000π rad/s

Z = √((0 + (10000π × 2.5 × 10^(-3) - 1/(10000π × 4.5 × 10^(-6)))^2))

≈ √((10000π × 2.5 × 10^(-3))^2 + (1/(10000π × 4.5 × 10^(-6)))^2)

≈ √(19.635 + 0.00001234568)

≈ √19.63501234568

≈ 4.43 Ω (approximately)

Therefore, the impedance of the LC circuit at 55 Hz is approximately 269.68 Ω and at 5 kHz is approximately 4.43 Ω.

Learn more about impedance: https://brainly.com/question/17153017

#SPJ11

The acceleration due to gravity is given as 9.8 meters per second per second (m/s²) since we can ignore air resistance. Thus, the speedometer will measure a constant increase in speed during the fall. During each second of the fall, the speed reading will increase by 9.8 meters per second (m/s). Therefore, the speedometer would measure a constant increase in speed during the fall by 9.8 m/s every second.

If a speedometer is placed upon a tree falling object in order to measure its instantaneous speed during the course of its fall, its speed reading (neglecting air resistance) would increase each second by 10 meters per second. This is because the acceleration due to gravity on Earth is 9.8 meters per second squared, which means that an object's speed increases by 9.8 meters per second every second it is in free fall.

For example, if an object is dropped from a height of 10 meters, it will hit the ground after 2.5 seconds. In the first second, its speed will increase from 0 meters per second to 9.8 meters per second. In the second second, its speed will increase from 9.8 meters per second to 19.6 meters per second. And so on.

It is important to note that air resistance will slow down an object's fall, so the actual speed of an object falling from a given height will be slightly less than the theoretical speed calculated above. However, the air resistance is typically very small for objects that are falling from relatively short heights, so the theoretical calculation is a good approximation of the actual speed.

To learn more about speed visit: https://brainly.com/question/13943409

#SPJ11

if 2 grams of matter could be entirely converted to energy, it would produce energy with a cost of 12.5 million pesos at 25 centavos per kWh.

we will make use of the energy  equation developed by Albert Einstein:

E = mc²

E= energy,

m = mass,

c =  speed of light =[tex]3.0 * 10^8[/tex] m/s

E = (0.002 kg) * ([tex]3.0 * 10^8[/tex]m/s)²

E =[tex]1.8 * 10^1^4[/tex] joules

1 kWh = [tex]3.6 * 10^6[/tex] joules

Energy in kWh = ([tex]1.8 * 10^1^4[/tex] joules) / ([tex]3.6 * 10^6[/tex] joules/kWh)

Energy in kWh =[tex]5.0 * 10^7[/tex] kWh

The Cost is then found as = ([tex]5.0 * 10^7[/tex] kWh) * (0.25 pesos/kWh)

Cost =  [tex]1.25 * 10^7[/tex]pesos

Learn more about Energy at:

https://brainly.com/question/13881533

#SPJ4