Answer:
[tex]x_{acetone}=7.970x10^{-3}[/tex]
Explanation:
Hello,
In this case, for the given molarity, we can assume a volume of 1 L of solution, to obtain the following moles of acetone:
[tex]n=0.422mol/L*1L=0.422mol[/tex]
Then, with the density of solution, we can compute the mass of the solution for the selected 1-L volume basis:
[tex]m_{solution}=1L*\frac{1000mL}{1L}*\frac{0.970g}{1mL}=970g[/tex]
After that, we compute the mass of water in the solution, considering the mass of acetone (molar mass = 58.08 g/mol):
[tex]m_{H_2O}=970g-0.422molAcetone*\frac{58.08g\ Acetone}{1mol\ Acetone} =945.49gH_2O[/tex]
Next, the moles of water:
[tex]n_{H_2O}=945.49g*\frac{1molH_2O}{18gH_2O} =52.53molH_2O[/tex]
Finally, the mole fraction:
[tex]x_{acetone}=\frac{n_{acetone}}{n_{acetone}+n_{H_2O}}=\frac{0.422mol}{0.422mol+52.53mol}\\ \\x_{acetone}=7.970x10^{-3}[/tex]
Regards.
Identify the particle that must receive 2 electrons to acquire a charge of +1. a) K b) Fe2+ c) O2- d) Nee) Al3+ (URGENT) Needs to be done in 30 mins
Answer:
E) Al³⁺
Explanation:
A reaction involving a gain of electrons is known as a reduction reaction because the oxidation number of the species gaining the electron is reduced.
In the given question, the oxidation number (charge) of particle accepting two electrons will decrease by 2. From the given options;
A. K is a neutral atom with oxidation number of 0. If is accepts two electrons, its oxidation number becomes -2.
K + 2e⁻ ----> K⁻²
B) Fe²⁺ has a charge of +2. If it accepts two electrons, its charge comes 0.
Fe⁺ + 2e⁻ ----> Fe
C) O²⁻ has a charge of -2. if it accepts two electrons, it will have a charge of -4.
O²⁻ + 2e⁻ ----> O⁴⁻
D) Ne has a charge of zero. If it accepts two electrons, its charge becomes -2.
Ne + 2e⁻ ----> Ne²⁻
E) Al³⁺ has a charge of +3. If it gains two electrons, its charge becomes +1.
Al³⁺ + 2e⁻ ----> Al⁺
Which pair of factors affects the force of gravity between objects
Answer:
The Answer is B. Mass and distance
Explanation:
Trust me lol
Answer:mass and distance
Explanation:
need this asap , help please
Answer:
Path A-B-D involves a catalyst and is slower than A-C-D
Explanation:
The diagram above illustrates both the catalyzed path and the uncatalyzed path of a chemical reaction.
The catalysed path is the path expressed with broken lines and the uncatalyzed path is the path expressed with thick small line as shown in the diagram above.
The catalyzed path has a higher activation energy than the uncatalyzed path.
Therefore, the catalyzed path will be slower that the uncatalyzed path because, the catalyzed path will require a higher energy to overcome the activation energy in order for the reaction to proceed to product.
On the other hand, the uncatalyzed path has a lower activation energy and a lesser amount of energy is needed to overcome it in order for the reaction to proceed to product.
A silver cube with an edge length of 2.42 cm and a gold cube with an edge length of 2.75 cm are both heated to 85.4 ∘C and placed in 112.0 mL of water at 20.5 ∘C . What is the final temperature of the water when thermal equilibrium is reached?
Answer:
Explanation:
Volume of silver cube = 2.42³ = 14.17 cm³
mass of silver cube = volume x density
= 14.17 x 10.49 = 148.64 gm
Volume of gold cube = 2.75³ = 20.8 cm³
mass of gold cube = 20.8 x 19.3 = 401.44 gm
specific heat of silver and gold are .24 and .129 J /g°C
mass of 112 mL water = 112 g
Heat absorbed = heat lost = mass x specific heat x temperature fall or rise
Heat lost by metals
= 148.64 x .24 x ( 85.4 -T) + 401.44 x .129 x ( 85.4 - T )
= (35.67 + 51.78 ) x ( 85.4 - T )
87.45 x ( 85.4 - T )
= 7468.23 - 87.45 T
Heat gained by water
= 112 x 1 x ( T - 20.5 )
= 112 T - 2296
Heat lost = heat gained
7468.23 - 87.45 T = 112 T - 2296
199.45 T = 9764.23
T = 48.95° C
A cylindrical rod of length 1 m and radius 1 cm is submerged in water. The rod has a non-uniform mass distribution such that one half of the rod is much more massive than the other half. At which point in the rod can the buoyant force be considered to be acting?
A) at the rod's geometrical center
B) two of the given choices are correct
C) none of these
D) at the rod's center of mass
E) at the rod's center of gravity
Answer:
A) at the rod's geometrical center
Explanation:
Let us assume that the rod is replaced by water. And now this water volume is in translational and in rotational equilibrium.
Therefore, a net upward force must have been exerted by the surrounding liquid which acts at the center of mass of the water volume.
This force determines through the geometric center of the column of the cylindrical water
Moreover, the force is also independent of submerged body into it
Hence, the first option is correct
A compound consisting of atoms of small atomic mass is more likely to require what
Answer:
a lower temperature to liquefy
Explanation:
Describe the formation of an aqueous libr solution when solid libr dissolves in water
Fill in the blanks with words given below.
K and I atoms
K and IF ions
dissociation
atoms
KI molecules
polar dilution
hydration
molecules ions
nonpolar
At the_______ surface of the solid _____________are pulled into solution by___________ the water molecules, where the______________ process surrounds separate with water molecules.
Answer and Explanation:
The water is a polar solvent which dissolves into the LiBr molecules and converts into [tex]Li^+[/tex] and [tex]Br^-[/tex] ions far from the solid also into the solution, when they are hydrated.
Now, the complete words are as given below:-
The [tex]K^+[/tex] and [tex]I^-[/tex] ions at the surface of the solid are pulled into the solution by the polar water molecules, where the hydration process surrounds separate ions with water molecules.
LiBr has been the ionic compound and has been dissociated in the water by the force of the polar water molecules. The water molecules that have been polar in nature exert the force onto the ionic compounds and help in the dissociation.
At the dissociation surface of the solid KI molecules, are pulled into the solution by the polar water molecules, where the hydration process surrounds ions and separates them with water molecules.
For more information about the hydration process, refer to the link:
https://brainly.com/question/939764
A 3.00-g sample of an alloy (containing only Pb and Sn) was dissolved in nitric acid (HNO3). Sulfuric acid was added to this solution, which precipitated 2.93 g of PbSO4. Assuming that all of the lead was precipitated, what is the percentage of Sn in the sample? (molar mass of PbSO4 = 303.3 g/mol)
Answer:
33.3% of Sn in the sample
Explanation:
The addition of SO₄⁻ ions produce the selective precipitation of Pb²⁺ to produce PbSO₄.
Moles of PbSO₄ (molar mass 303.26g/mol) in 2.93g are:
2.93g ₓ (1mol / 303.26) = 9.66x10⁻³ moles PbSO₄ = Moles Pb²⁺.
As molar mass of Pb is 207.2g/mol, mass in 9.66x10⁻³ moles of Pb²⁺ is:
9.66x10⁻³ moles of Pb²⁺ ₓ (207.2g / mol) = 2.00g of Pb²⁺
As mass of the sample is 3.00g, mass of Sn²⁺ is 3.00g - 2.00g = 1.00g
And the percentage of Sn in the sample is:
1.00g / 3.00g ₓ 100 =
33.3% of Sn in the sampleA solid white substance A is heated strongly in the absence of air. It decomposes to form a new white substance B and a gas C. The gas has exactly the same properties as the product obtained when carbon is burned in an excess of oxygen. Based on these observations, can we determine whether solids A and B and the gas C are elements or compounds?
Answer:
A, B and C are compounds
Explanation:
First of all, I need to establish that when carbon is burnt in excess oxygen, carbon dioxide is obtained as shown by this equation; C(s) + O2(g) ----> CO2(g).
Looking at the presentation in the question, A was said to be heated strongly and it decomposed to B and C. Only a compound can decompose when heated. Elements can not decompose on heating. Secondly, compounds usually decompose to give the same compounds that combined to form them. Compounds hardly decompose into their constituent elements.
Again from the information provided, the compound A is a white solid. This is likely to be CaCO3. It decomposes to give another white solid. This may be CaO and the gas was identified as CO2.
Hence;
CaCO3(s)--------> CaO(s) + CO2(g)
What are the correct formulas and coefficients for the products of the following double-replacement reaction? RbOH + H3PO4→
Answer:
3 RbOH + H₃PO₄ → Rb₃PO₄ + 3 H₂O
Explanation:
Let's consider the double-replacement reaction between rubidium hydroxide and phosphoric acid to form rubidium phosphate and water. The cation rubidium replaces the cation hydrogen and the anion hydroxyl replaces the anion phosphate. The balanced chemical reaction is:
3 RbOH + H₃PO₄ → Rb₃PO₄ + 3 H₂O
Cual es la diferencia entre agua pesada y agua ligera a) el agua pesada contiene mas minerales que el agua ligera b) el agua ligera es liquida mientras el agua pesada es solida c) el agua ligera es agua purificada y el agua pesada es agua contaminada d) el agua pesada contiene mas elementos estearato de sodio
Answer:
d) El agua pesada contiene mas elementos
Explanation:
La diferencia fundamental entre el agua pesada y el agua ligera es que la primera tiene una proporción mayor de deuterio que la segunda. El deuterio es un ión del hidrógeno que tiene un peso atómico mayor que el hidrógeno común y corriente. Por ende, la opción D ofrece la mejor aproximación.
Answer:
....................
lllllllllllllllll
Explanation:ki
A naturally occurring oil co-distills with water to produce an oil/water distillate that is 20% oil by weight. If the molecular weight of the oil 100 g/mol, what was the partial pressure of the oil during distillation assuming atmospheric pressure is 760 mm Hg
Answer:
Explanation:
Partial pressure of oil = mole fraction of oil x total pressure
mole fraction of oil = mole of oil / mole of water + mole of oil
= mole of oil = mass of oil / molecular weight of oil
= 20 / 100 = .2
mole of water = 80 / 18
= 4.444
mole fraction of oil = .2 / .2 + 4.444
= .2 / 4.644
Partial pressure of oil = mole fraction of oil x total pressure
= (.2 / 4.644 ) x 760 mm
= 32.73 mm Hg .
A balloon filled with helium has a volume of 4.5 × 103 L at 25°C. What volume will the balloon occupy at 50°C if the pressure surrounding the balloon remains constant?
Answer:
[tex]V_2 = 4.87 * 10^3[/tex]
Explanation:
This question is an illustration of ideal Gas Law;
The given parameters are as follows;
Initial Temperature = 25C
Initial Volume = 4.5 * 10³L
Required
Calculate the volume when temperature is 50C
NB: Pressure remains constant;
Ideal Gas Law states that;
[tex]PV = nRT[/tex]
The question states that the pressure is constant; this implies that the constant in the above formula are P, R and n
Divide both sides by PT
[tex]\frac{PV}{PT} = \frac{nRT}{PT}[/tex]
[tex]\frac{V}{T} = \frac{nR}{P}[/tex]
Represent [tex]\frac{nR}{P}[/tex] with k
[tex]\frac{V}{T} = k[/tex]
[tex]k = \frac{V_1}{T_1} = \frac{V_2}{T_2}[/tex]
At this point, we can solve for the required parameter using the following;
[tex]\frac{V_1}{T_1} = \frac{V_2}{T_2}[/tex]
Where V1 and V2 represent the initial & final volume and T1 and T2 represent the initial and final temperature;
From the given parameters;
V1 = 4.5 * 10³L
T1 = 25C
T2 = 50C
Convert temperatures to degree kelvin
V1 = 4.5 * 10³L
T1 = 25 +273 = 298K
T2 = 50 + 273 = 323K
Substitute values for V1, T1 and T2 in [tex]\frac{V_1}{T_1} = \frac{V_2}{T_2}[/tex]
[tex]\frac{4.5 * 10^3}{298} = \frac{V_2}{323}[/tex]
Multiply both sides by 323
[tex]323 * \frac{4.5 * 10^3}{298} = \frac{V_2}{323} * 323[/tex]
[tex]323 * \frac{4.5 * 10^3}{298} = V_2[/tex]
[tex]V_2 = 323 * \frac{4.5 * 10^3}{298}[/tex]
[tex]V_2 = \frac{323 * 4.5 * 10^3}{298}[/tex]
[tex]V_2 = \frac{1453.5 * 10^3}{298}[/tex]
[tex]V_2 = 4.87 * 10^3[/tex]
Hence, the final volume at 50C is [tex]V_2 = 4.87 * 10^3[/tex]
Kinetic energy and gravitational potential energy are both forms of which type
of energy?
A. Internal energy
B. Mechanical energy
C. Potential energy
D. Thermal energy
Answer:
C. Potential energy
Explanation:
Kinetic energy and gravitational potential energy are both forms of potential energy. Potential energy is stored energy, when an object is not in motion it has stored energy. When an object is an motion it has kinetic energy. An object posses gravitational potential energy when it is above or below the zero height.
Write the empirical formula
Answer:
[tex]Pb(CO_{3})_{2} \\Pb(NO_{3})_{4} \\FeCO_{3}\\Fe(NO_{3})_{2}[/tex]
Explanation:
[tex]Pb^{4+}(CO_{3}^{2-})_{2} --->Pb(CO_{3})_{2} \\Pb^{4+} (NO_{3}^{-})_{4} --->Pb(NO_{3})_{4} \\Fe^{2+} CO_{3}^{2-} --->FeCO_{3}\\Fe^{2+} (NO_{3}^{-})_{2}--->Fe(NO_{3})_{2}[/tex]
How many oxygen molecules are needed to make 10 carbon dioxide molecules according to the following balanced chemical equation? 2 CO + O2 → 2 CO2
five oxygen molecules
step by step explanation.
according to the equation,one molecule of oxygen is enough to react with two carbon molecules thus 10 carbon molecules need 5oxygen molecules
The lock and key model and the induced fit model are two models of enzyme action explaining both the specificity and the catalytic activity of enzymes. Indicate whether each statement is part of the lock and key model, the induced fit model, or is common to both models.
a. Enzyme conformation changes when it binds the substrate so the active site fits the substrate
b. Substrate binds to the enzyme at the active site, forming an enzyme-substrate complex
c. Enzyme active site has a rigid structure complementary
d. Substrate binds to the enzyme through noncovalent interactions
Answer:
"The active site of the enzyme has a complementary rigid structure" belongs to the key and lock system
"The conformation of the enzyme changes when it binds to the substrate so that the active site conforms to the substrate." belongs to the induced fit system.
"The substrate binds to the enzyme at the active site, forming an enzyme-substrate complex" belongs to both, that is, the key and lock system and the induced fit system.
"The substrate binds to the enzyme through non-covalent interactions" can belong to both enzyme systems.
Explanation:
Enzymatic key and lock systems bear this name because the enzyme at its site of union with the substrate has an ideal shape so that its fit is perfect, similar to a headbreaker, so once they are joined they are not It can bind another substrate to the enzyme, since they are generally associated with strong chemical bonds.
The shape of the enzyme's active site is a negative of what the shape of the substrate would be.
On the other hand, in the mechanism or enzyme system of induced adjustment, the enzyme has an active site that is where it binds with the substrate and another site where another chemical component binds, which when this chemical component binds this enzyme changes its morphology and becomes "active" to bond with your substrate.
This happens a lot in the inactive enzymes that are usually activated in digestive processes since the fact that these enzymes are constantly active would be dangerous, therefore the body takes the induced enzyme system as a control mechanism, where a molecule or chemical compound induces change morphological of an enzyme by means of the allosteric union so that it joins its substrate and catalyzes or analyzes it, depending on the enzymatic character of the enzyme.
Vitamin c is known chemically by the name ascorbic acid determine the empirical formula of ascorbic acid if it is composed of 40.92% carbon, 4.58% hydrogen, and 54.50% oxygen.
Answer:
[tex]=C_3H_4O_3[/tex]
Explanation:
When percentage composition is given, and asked for the empirical formula, it is simplest to assume 100 g of material. Thus,
Mass C = 40.92 g. Moles C = 40.92 g x 1 mole/12 g = 3.41 moles C
Mass H = 4.58 g. Moles H = 4.58 g x 1 mole/1.0 g = 4.58 moles H
Mass O = 54.50 g. Moles O = 54.50 g x 1 mole/16 g = 3.41 moles O
Now, we want to get the moles into whole numbers, so we begin by dividing all by the smallest, i.e. divide all values by 3.41.
Moles C = 3.41/3.41 = 1
Moles H = 4.58/3.41 = 1.34
Moles O = 3.41/3.41 = 1
Now, in order to get 1.34 to be a whole number we multiply it (and all others) by 3
Moles C = 1x3 = 3
Moles H = 1.34x3 = 4
Moles O = 1x3 = 3
Empirical Formula [tex]=C_3H_4O_3[/tex]
Explain with examples following characteristics of chemical reactions: a. Change of colour b. Evolution of gas c. Change of smell d. Change of state
Answer:
Explanation:
a. change of colour:
A chemical reaction rearranges the constituent atoms of the reactants to create different substances as products. The products have different molecular structures than the reactants. Different atoms and molecules radiate different colours of light. Hence, there usually is a change in colour during a chemical reaction.
Eg: copper reactions with the elements
b. Evolution of gas:
A gas evolution reaction is a chemical reaction in which one of the end products is a gas such as oxygen or carbon dioxide.
Eg: ammonium hydroxide breaks down to water and ammonia gas.
c. Change of smell :
Production of an Odor Some chemical changes produce new smells. ... The formation of gas bubbles is another indicator that a chemical change may have occured.
Eg: The chemical change that occurs when an egg is rotting produces the smell of sulfur.
d. Change of state:
A chemical reaction is a process in which one or more substances, also called reactants, are converted to one or more different substances, known as products.
Eg: candle wax (solid) melts initially to produce molten wax (liquid)
plz mark as brainliest!!!!
A gas particle of mass 5.31 × 10^-23 kg has a velocity of 1.00 102 m/s. What is the kinetic energy of the molecule
Answer:
Kinetic energy = 1/2mv²
where m is the mass
v = velocity
m = 5.31 × 10^-23 kg
v = 1.00 × 10^2 m/s
Kinetic energy = 1/2 × 5.31 × 10^-23 × ( 1.00 × 10^2)²
= 2.655 × 10^-19 Joules
Hope this helps
What are the three types of combustion reactions
Answer:
Slow combustion
Spontaneous combustion
Explosive combustion
Explanation:
-Slow combustion reactions: Occurs at low temperatures. Cellular respiration is an example.
-Spontaneous combustion reactions: Occurs suddenly without an outside heat source. The heat source is the result of oxidation.
-Explosive combustion reactions: Involves an oxidizing agent.
hopefully this helped :3
Answer:
Three types are: Rapid Combustion, Complete Combustion, and Spontaneous Combustion.
Explanation:
Note: there are more types! This is just three random ones I picked to list. Hope this helps! :)
what bonding is similar to ionic bonding, except there are no high-electronegativity atosms present to accept any electrons that the present atoms are willing to donate.
Answer:
Metallic bonding
Explanation:
Ionic bonding involves the transfer of electrons from a highly electropositive metal to a highly electronegative nonmetal.
The metallic bond is somewhat similar to the ionic bond since there are also charged positive metal ions. The only difference is that there isn't any electronegative element that accepts the electrons.
In a metallic bond, the positively charged metal ions are bound together by a sea of mobile electrons. The attractive force between the metal ions and the mobile electrons hold the metallic crystal lattice together.
If 50 ml of 1.00 M of H2SO4 and 50 ml of 2.0 M KOH are mixed what is the concentration of the resulting solutes?
Answer: [H2SO4] = 0.5M;
[KOH] = 1M
Explanation: Molarity is the solution concentration defined by:
molarity = [tex]\frac{mol}{L}[/tex] or M
To determine the concentration of the mixture, find how many mols of each compound there are in the mixture:
50 mL = 0.05L
H2SO4
1 mol/L * 0.05L = 0.05mol
KOH
2mol/L * 0.05L = 0.1 mol
The mixture has a total volume of:
V = 50 + 50 = 100 mL = 0.1 L
The concentration of the resullting solutes:
[H2SO4] = [tex]\frac{0.05}{0.1}[/tex] = 0.5 M
[KOH] = [tex]\frac{0.1}{0.1}[/tex] = 1 M
Concentration of H2SO4 is 0.5M while for KOH is 1M.
The mathematics of combining quantum theory with wave motion of atomic particles is known as _____.
Combining quantum theory with wave motion of atomic particles is: Wave Mechanics
g Suppose you are titrating an acid of unknown concentration with a standardized base. At the beginning of the titration, you read the base titrant volume as 1.94 mL. After running the titration and reaching the endpoint, you read the base titrant volume as 23.82 mL. What volume of base was required for the titration
Answer:
21.88mL is the volume of base required for the titration.
Explanation:
For an acid-base titration trying to find the concentration of an acid, you must add a known quantity of the acid and titrate it with an standarized base.
If you know the moles of base you add to the acid solution, these moles are equal to moles of acid.
In the buret of the titration, initial volume is 1.94mL and final volume is 23.82mL. The volume you are adding is the difference between initial and final volume, that is:
23.82mL - 1.94mL
21.88mL is the volume of base required for the titration.How many formula units make up 36.0 g of magnesium chloride (MgCl2)?
Express the number of formula units numerically.
Answer: There are [tex]2.29\times 10^{23}[/tex] formula units
Explanation:
According to avogadro's law, 1 mole of every substance occupies 22.4 L at STP and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.
To calculate the moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text {Molar mass}}=\frac{36.0g}{95g/mol}=0.38moles[/tex]
1 mole of [tex]MgCl_2[/tex] contains = [tex]6.023\times 10^{23}[/tex] formula units
Thus 0.38 moles of [tex]MgCl_2[/tex] contains = [tex]\frac{6.023\times 10^{23}}{1}\times 0.38=2.29\times 10^{23}[/tex] formula units
Thus there are [tex]2.29\times 10^{23}[/tex] formula units
1. Corrosion in metals is an example of what?
Answer:
In the most common use of the word, this means electrochemical oxidation of metal in reaction with an oxidant such as oxygen or sulfates. Rusting, the formation of iron oxides, is a well-known example of electrochemical corrosion.Which element's neutral atoms will have the electron configuration
1s22s22p3s23p'?
a. boron
b. carbon
c. silicon
d. aluminum
Answer:
Alumunium
Explanation:
Alumunium = [Ne] 3s² 3p¹
Ne = [He]2s²2p⁶
He = 1s
Alumunium = 1s 2s²2p⁶3s² 3p¹
Answer:
D
Explanation:
why is copper and iron are used for cooking utensils
Answer:
because according to the electron sea model they are good conductor of heat so,they can be used for cooking.
How many moles of carbon atoms are there in 0.500 mol of C2H6?
The number of moles of carbon atoms in 0.500 mol of ethane (C₂H₆) is equal to one mole.
What is a mole?A mole can be defined as a scientific unit that is utilized to calculate the quantities such as atoms, molecules, ions, or other particular particles. The mass of one mole of a given chemical element is atomic mass and that of 1 mole of a chemical compound is molar mass.
The number of entities found in one mole is equal to 6.023 × 10 ²³ which is known as Avogadro’s constant.
Given, the number of moles of C₂H₆ = 0.500 mole
One molecule of ethane has carbons = 2
One mole of ethane has moles of carbons = 2 moles
0.500 mol of ethane has moles of carbon atoms = 0.500×2 = 1 mol
Therefore, one mole of carbon atoms is present in 0.500 mol of ethane C₂H₆.
Learn more about the mole, here:
brainly.com/question/26416088
#SPJ5