The diameter can be determined by doubling the distance of 1.30 m, resulting in a diameter of approximately 2.60 m.
The diameter of the circle formed by the light emerging from the bottom of the swimming pool can be determined by considering the refractive properties of water and the geometry of the situation.
When light travels from one medium (in this case, water) to another medium (air), it undergoes refraction. The angle of refraction depends on the angle of incidence and the refractive indices of the two media.
In this scenario, the light is traveling from water to air, and since the light is emerging from the still water, the angle of incidence is 90 degrees (perpendicular to the surface). The light will refract and form a circle on the water surface.
To determine the diameter of this circle, we can use Snell's law, which relates the angles of incidence and refraction to the refractive indices of the two media. The refractive index of water is approximately 1.33, and the refractive index of air is approximately 1.00.
Applying Snell's law, we find that the angle of refraction in air is approximately 48.76 degrees. Since the angle of incidence is 90 degrees, the light rays will spread out symmetrically in a circular shape, with the point of emergence at the center.
The diameter of the circle formed by the light on the water surface will depend on the distance between the light fixture and the water surface. In this case, the diameter can be determined by doubling the distance of 1.30 m, resulting in a diameter of approximately 2.60 m.
Learn more about Diameter from the given link:
https://brainly.com/question/32968193
#SPJ11
Show that the first Covarient derivative of metric tensor th
The first covariant derivative of the metric tensor is a mathematical operation that describes the change of the metric tensor along a given direction. It is denoted as ∇μgνρ and can be calculated using the Christoffel symbols and the partial derivatives of the metric tensor.
The metric tensor in general relativity describes the geometry of spacetime. The first covariant derivative of the metric tensor, denoted as ∇μgνρ, represents the change of the metric tensor components along a particular direction specified by the index μ. It is used in various calculations involving curvature and geodesic equations.
To calculate the first covariant derivative, we can use the Christoffel symbols, which are related to the metric tensor and its partial derivatives. The Christoffel symbols can be expressed as:
Γλμν = (1/2) gλσ (∂μgσν + ∂νgμσ - ∂σgμν)
Then, the first covariant derivative of the metric tensor is given by:
∇μgνρ = ∂μgνρ - Γλμν gλρ - Γλμρ gνλ
By substituting the appropriate Christoffel symbols and metric tensor components into the equation, we can calculate the first covariant derivative. This operation is essential in understanding the curvature of spacetime and solving field equations in general relativity.
To learn more about tensor click here brainly.com/question/31184754
#SPJ11
A 50 kg student bounces up from a trampoline with a speed of 3.4 m/s. Determine the work done on the student by the force of gravity when she is 5.3 m above the trampoline.
The work done on the student by the force of gravity when she is 5.3 m above the trampoline is approximately 2574 Joules.
To determine the work done on the student by the force of gravity, we need to calculate the change in potential-energy. The gravitational potential energy (PE) of an object near the surface of the Earth is given by the formula:
PE = m * g * h
where m is the mass of the object, g is the acceleration due to gravity, and h is the height above the reference level.
In this case, the student's mass is 50 kg and the height above the trampoline is 5.3 m. We can calculate the initial potential energy (PEi) when the student is on the trampoline and the final potential energy (PEf) when the student is 5.3 m above the trampoline.
PEi = m * g * h_initial
PEf = m * g * h_final
The work done by the force of gravity is the change in potential energy, which can be calculated as:
Work = PEf - PEi
Let's calculate the work done on the student by the force of gravity:
PEi = 50 kg * 9.8 m/s² * 0 m (height on the trampoline)
PEf = 50 kg * 9.8 m/s² * 5.3 m (height 5.3 m above the trampoline)
PEi = 0 J
PEf = 50 kg * 9.8 m/s² * 5.3 m
PEf ≈ 2574 J
Work = PEf - PEi
Work ≈ 2574 J - 0 J
Work ≈ 2574 J
Therefore, the work done on the student by the force of gravity when she is 5.3 m above the trampoline is approximately 2574 Joules.
To learn more about work , click here : https://brainly.com/question/18094932
#SPJ11
A small rock is thrown vertically upward with a speed of 28.4 m/s from the edge of the roof of a 35.5 m tall building. The rock doesn't hit the building on its way back down and lands on the street below. Ignore air resistance. (a) What is the speed (in m/s ) of the rock just before it hits the street? (b) How much time (in sec) elapses from when the rock is thrown until it hits the street?
To determine the speed of the rock just before it hits the street, we need to apply the conservation of energy principle. The total energy of the rock is equal to the sum of its potential energy.
At the top of the building and its kinetic energy just before hitting the street. E_total = E_kinetic + E_potentialUsing the conservation of energy formula and the known values, E_total = E_kinetic + E_potential(1/2)mv² + mgh = mghence (1/2) v² = ghv = √2ghwhere m is the mass of the rock, v is its velocity, g is the acceleration due to gravity, and h is the height of the building.
The velocity of the rock just before hitting the street is 83.0 m/s. b) We can find the time taken by the rock to hit the street using the following kinematic equation, where is the displacement, Vi is the initial velocity, g is the acceleration due to gravity, and t is the time taken. From the equation, At the top of the building and g = 9.8 m/s². Solving the quadratic equation.
To know more about conservation visit:
https://brainly.com/question/9530080
#SPJ11
Suppose you want to operate an ideal refrigerator with a cold temperature of -12.3°C, and you would like it to have a coefficient of performance of 7.50. What is the hot reservoir temperature for such a refrigerator?
An ideal refrigerator operating with a cold temperature of -12.3°C and a coefficient of performance of 7.50 can be analyzed with the help of
Carnot's refrigeration cycle
.
The coefficient of performance is a measure of the efficiency of a refrigerator.
It represents the ratio of the heat extracted from the cold reservoir to the work required to operate the refrigerator.
Coefficient of performance
(COP) = Heat extracted from cold reservoir / Work inputSince the refrigerator is ideal, it can be assumed that it operates on a Carnot cycle, which consists of four stages: compression, rejection, expansion, and absorption.
The Carnot cycle is a reversible cycle, which means that it can be
operated
in reverse to act as a heat engine.Carnot's refrigeration cycle is represented in the PV diagram as follows:PV diagram of Carnot's Refrigeration CycleThe hot reservoir temperature (Th) of the refrigerator can be determined by using the following formula:COP = Th / (Th - Tc)Where Th is the temperature of the hot reservoir and Tc is the temperature of the cold reservoir.
Substituting
the values of COP and Tc in the above equation:7.50 = Th / (Th - (-12.3))7.50 = Th / (Th + 12.3)Th + 12.3 = 7.50Th60.30 = 6.50ThTh = 60.30 / 6.50 = 9.28°CTherefore, the hot reservoir temperature required to operate the ideal refrigerator with a cold temperature of -12.3°C and a coefficient of performance of 7.50 is 9.28°C.
to know more about
Carnot's refrigeration cycle
pls visit-
https://brainly.com/question/19723214
#SPJ11
Example 8 A planet orbits a star in a year of length 4.37 x 10's, in a nearly circular orbit of radius 2.94 x 1011 m. With respect to the star, determine (a) the angular speed of the planet, (b) the tangential speed of the planet, and (c) the magnitude of the planet's centripetal acceleration. (a) Number Units m m (b) Number Units m/s (c) Number Units m/ s2
(a) The angular speed of the planet is approximately 0.144 rad/s.
(b) The tangential speed of the planet is approximately 1.27 x 10⁴ m/s.
(c) The magnitude of the planet's centripetal acceleration is approximately 5.50 x 10⁻³ m/s².
(a) The angular speed of an object moving in a circular path is given by the equation ω = 2π/T, where ω represents the angular speed and T is the time period. In this case, the time period is given as 4.37 x 10⁶ s, so substituting the values, we have ω = 2π/(4.37 x 10⁶) ≈ 0.144 rad/s.
(b) The tangential speed of the planet can be calculated using the formula v = ωr, where v represents the tangential speed and r is the radius of the orbit. Substituting the given values, we get v = (0.144 rad/s) × (2.94 x 10¹¹ m) ≈ 1.27 x 10⁴ m/s.
(c) The centripetal acceleration of an object moving in a circular path is given by the equation a = ω²r. Substituting the values, we get a = (0.144 rad/s)² × (2.94 x 10¹¹ m) ≈ 5.50 x 10⁻³ m/s².
learn more about angular speed here:
https://brainly.com/question/30402548
#SPJ11
Show work when possible! thank you! :)
1. What equation will you use to calculate the acceleration of gravity in your experiment?
2. A ball is dropped from a height of 3.68 m and takes 0.866173 s to reach the floor. Calculate the
free fall acceleration.
3. Two metal balls are dropped from the same height. One ball is two times larger and heavier
than the other ball. How do you expect the free fall acceleration of the larger ball compares to
the acceleration of the smaller one?
1. To calculate the acceleration of gravity in the experiment, the equation used is:
g = 2h / t²
2. The free fall acceleration can be calculated as 8.76 m/s².
3. The free fall acceleration of the larger ball is expected to be the same as the acceleration of the smaller ball.
1. The equation used to calculate the acceleration of gravity in the experiment is derived from the kinematic equation for motion under constant acceleration: h = 0.5gt², where h is the height, g is the acceleration of gravity, and t is the time taken to fall.
By rearranging the equation, we can solve for g: g = 2h / t².
2. - Height (h) = 3.68 m
- Time taken (t) = 0.866173 s
Substituting these values into the equation: g = 2 * 3.68 / (0.866173)².
Simplifying the expression: g = 8.76 m/s².
Therefore, the free fall acceleration is calculated as 8.76 m/s².
3. The acceleration of an object in free fall is solely determined by the gravitational field strength and is independent of the object's mass. Therefore, the larger ball, being two times larger and heavier than the smaller ball, will experience the same acceleration due to gravity.
This principle is known as the equivalence principle, which states that the inertial mass and gravitational mass of an object are equivalent. Consequently, both balls will have the same free fall acceleration, regardless of their size or weight.
To know more about acceleration refer here:
https://brainly.com/question/30660316#
#SPJ11
A woman is standing on a bathroom scale in an elevator that is not moving. The balance reads 500 N. The elevator then moves downward at a constant speed of 5 m/s. What is the reading on the scale while the elevator is descending at constant speed?
d. 500N
e. 750N
b. 250N
c. 450N
a. 100N
Two point-shaped masses m and M are separated by a distance d. If the separation d remains fixed and the masses are increased to the values 3m and 3M respectively, how will the gravitational force between them change?
d. The force will be nine times greater.
b. The force will be reduced to one ninth.
e. It is impossible to determine without knowing the numerical values of m, M, and d.
c. The force will be three times greater.
a. The force will be reduced to one third.
The reading on the scale while the elevator is descending at a constant speed is 500N (d). The gravitational force between the masses will be nine times greater when the masses are increased to 3m and 3M (d).
When the elevator is not moving, the reading on the scale is 500N, which represents the normal force exerted by the floor of the elevator on the woman. This normal force is equal in magnitude and opposite in direction to the gravitational force acting on the woman due to her weight.
When the elevator moves downward at a constant speed of 5 m/s, it means that the elevator and everything inside it, including the woman, are experiencing the same downward acceleration. In this case, the woman and the scale are still at rest relative to each other because the downward acceleration cancels out the gravitational force.
As a result, the reading on the scale remains the same at 500N. This is because the normal force provided by the scale continues to balance the woman's weight, preventing any change in the scale reading.
Therefore, the reading on the scale while the elevator is descending at a constant speed remains 500N, which corresponds to option d. 500N.
Regarding the gravitational force between the point-shaped masses, according to Newton's law of universal gravitation, the force between two masses is given by:
F = G × (m1 × m2) / r²,
where
F is the gravitational forceG is the gravitational constantm1 and m2 are the massesr is the separation distance between the massesIn this case, the separation distance d remains fixed, but the masses are increased to 3m and 3M. Plugging these values into the equation, we get:
New force (F') = G × (3m × 3M) / d² = 9 × (G × m × M) / d² = 9F,
where F is the original force between the masses.Therefore, the gravitational force between the masses will be nine times greater when the masses are increased to 3m and 3M, which corresponds to option d. The force will be nine times greater.
To learn more about gravitational force, Visit:
https://brainly.com/question/27943482
#SPJ11
What must be the electric field between two parallel plates
there is a potential difference of 0.850V when they are placed
1.33m apart?
1.13N/C
0.639N/C
1.56N/C
0.480N/C
The electric field between the two parallel plates when there is a potential difference of 0.850 V and the plates are placed 1.33 m apart is 0.639 N/C.
To calculate the electric field between two parallel plates, we can use the formula:
E=V/d
Where,
E is the electric field,
V is the potential difference between the plates, and
d is the distance between the plates.
According to the question, the potential difference between the two parallel plates is 0.850 V, and the distance between them is 1.33 m. We can substitute these values in the formula above to find the electric field:E = V/d= 0.850 V / 1.33 m= 0.639 N/C
Since the units of the answer are in N/C, we can conclude that the electric field between the two parallel plates when there is a potential difference of 0.850 V and the plates are placed 1.33 m apart is 0.639 N/C. Therefore, the correct option is 0.639N/C.
To know more about electric field:
https://brainly.com/question/12324569
#SPJ11
An RL circuit is composed of a 12 V battery, a 6.0 H inductor and a 0.050 Ohm resistor. The switch is closed at t=0 The time constant is 2.0 minutes and after the switch has been closed a long time the voltage across the inductor is 12 V. The time constant is 1.2 minutes and after the switch has been closed a long time the voltage across the inductor is zero. The time constant is 2.0 minutes and after the switch has been closed a long time the voltage across the inductor is zero
The time constant is 1.2 minutes and after the switch has been closed a long time the voltage across the inductor is 12 V.
The RL circuit described has a time constant of 1.2 minutes, and after the switch has been closed for a long time, the voltage across the inductor is 12 V.
The time constant (τ) of an RL circuit is determined by the product of the resistance (R) and the inductance (L) and is given by the formula τ = L/R. In this case, the time constant is 1.2 minutes.
When the switch is closed, current begins to flow through the circuit. As time progresses, the current increases and approaches its maximum value, which is determined by the battery voltage and the circuit's total resistance.
In an RL circuit, the voltage across the inductor (V_L) can be calculated using the formula V_L = V_0 * (1 - e^(-t/τ)), where V_0 is the initial voltage across the inductor, t is the time, and e is the base of the natural logarithm.
Given that the voltage across the inductor after a long time is 12 V, we can set V_L equal to 12 V and solve for t to determine the time it takes for the voltage to reach this value. The equation becomes 12 = 12 * (1 - e^(-t/τ)).
By solving this equation, we find that t is equal to approximately 3.57 minutes. Therefore, after the switch has been closed for a long time, the voltage across the inductor in this RL circuit reaches 12 V after approximately 3.57 minutes.
Learn more about resistance from the given link
https://brainly.com/question/29427458
#SPJ11
Oscillations in the elevator Gravity stretches an elastic thin wire of 1 m length by 15.5 mm as 500 g mass is attached. Determine the oscillation period, if the wire is initially stretched a little more. Which length does a pendulum thread need to have, if the pendulum should have the same period? Now put the pendulum into an elevator. The elevator accelerates and is going up: The velocity increases linearly in time during the first 3 s until reaching 24 m/s. Sketch the deflections of the pendulum versus time t in the elevator frame of reference 0.5 s before the elevator starts until 0.5 s after the start. The initial deflection is 1°. How will the deflection amplitude change qualitatively? What sort of motions of the pendulum can be observed if the elevator is going down with 9.81 m/s²?
If the elevator is going down with an acceleration of 9.81 m/s² (equal to the acceleration due to gravity), the pendulum will not experience any additional pseudo-force.
To determine the oscillation period of the elastic wire, we can use Hooke's law:
F = k * x
where F is the force, k is the spring constant, and x is the displacement.
Given that the wire is stretched by 15.5 mm (or 0.0155 m) with a 500 g (or 0.5 kg) mass attached, we can calculate the force:
F = m * g = 0.5 kg * 9.81 m/s^2 = 4.905 N
We can now solve for the spring constant:
k = F / x = 4.905 N / 0.0155 m = 316.45 N/m
The oscillation period can be calculated using the formula:
T = 2π * √(m / k)
T = 2π * √(0.5 kg / 316.45 N/m) ≈ 0.999 s
If the wire is initially stretched a little more, the oscillation period will remain the same since it depends only on the mass and the spring constant.
To find the length of the pendulum thread that would have the same period, we can use the formula for the period of a simple pendulum:
T = 2π * √(L / g)
Where L is the length of the pendulum thread and g is the acceleration due to gravity (approximately 9.81 m/s²).
Rearranging the formula, we can solve for L:
L = (T / (2π))^2 * g = (0.999 s / (2π))^2 * 9.81 m/s² ≈ 0.248 m
Therefore, the pendulum thread needs to have a length of approximately 0.248 m to have the same period as the elastic wire.
If the pendulum is put into an elevator that is accelerating upwards, the deflection of the pendulum versus time will change. Initially, before the elevator starts, the deflection will be 1°. As the elevator accelerates upwards, the deflection will increase due to the pseudo-force acting on the pendulum. The deflection will follow a sinusoidal pattern, with the amplitude gradually increasing until the elevator reaches its maximum velocity. The deflection will then start decreasing as the elevator decelerates or comes to a stop.
If the elevator is going down with an acceleration of 9.81 m/s² (equal to the acceleration due to gravity), the pendulum will not experience any additional pseudo-force. In this case, the pendulum will behave as if it is in a stationary frame of reference, and the deflection will follow a simple harmonic motion with a constant amplitude, similar to the case without any acceleration.
Learn more about oscillation here:
https://brainly.com/question/12622728
#SPJ11
A 28 g ball of clay traveling east at 3.2 m/s collides with a 32 g ball of clay traveling north at 2.8 m/s
The two balls will move together at a velocity of 2.987 m/s at an angle between east and north after the collision.
When the 28 g ball of clay traveling east at 3.2 m/s collides with the 32 g ball of clay traveling north at 2.8 m/s, the two balls will stick together due to the conservation of momentum.
To solve this problem, we can use the principle of conservation of momentum, which states that the total momentum before the collision is equal to the total momentum after the collision.
The momentum of an object is given by the product of its mass and velocity. Therefore, the momentum of the 28 g ball of clay before the collision is (28 g) * (3.2 m/s) = 89.6 g·m/s east, and the momentum of the 32 g ball of clay before the collision is (32 g) * (2.8 m/s) = 89.6 g·m/s north.
After the collision, the two balls stick together, so their total mass is 28 g + 32 g = 60 g. The momentum of the combined mass can be calculated by adding the momenta of the individual balls before the collision.
Therefore, the total momentum after the collision is 89.6 g·m/s east + 89.6 g·m/s north = 179.2 g·m/s at an angle between east and north.
To calculate the velocity of the combined balls after the collision, divide the total momentum by the total mass: (179.2 g·m/s) / (60 g) = 2.987 m/s.
To know more about velocity visit:-
https://brainly.com/question/30559316
#SPJ11
The density of glycerin is 20 g/cm³ at 20 °C. Find the density of glycerin at 60 °C. The volume coefficient of glycerin is 5.1 x 10-4 °C-¹. A) 19.6 g/cm³ B 21.2 g/cm³ C 20.12 g/cm³ D 20 g/cm³
The correct option is D) 20 g/cm³.
The volume coefficient of glycerin is 5.1 x 10-4 °C-¹.
The temperature difference is 40°C (60°C - 20°C).
We can use the formula for calculating thermal expansion to calculate the new volume of glycerin.ΔV = V₀αΔT
Where, ΔV is the change in volume V₀ is the initial volume α is the volume coefficient ΔT is the temperature difference
V₀ = m/ρ₀
where m is the mass of the glycerin and ρ₀ is the density of glycerin at 20°C.
Now, we can substitute the values into the formula for calculating ΔV.ΔV = (m/ρ₀) α ΔT
Now, we can calculate the new volume of glycerin at 60°C.V₁ = V₀ + ΔV
Where V₁ is the new volume at 60°C, and V₀ is the initial volume at 20°C.ρ = m/V₁
Now, we can calculate the density of glycerin at 60°C.
ρ = m/V₁ρ = m/(V₀ + ΔV)
ρ = m/[m/ρ₀ + (m/ρ₀) α ΔT]ρ = 1/[1/ρ₀ + α ΔT]
ρ = 1/[1/20 + (5.1 x 10-4)(40)]
ρ = 1/[1/20 + 0.0204]
ρ = 1/[0.0504]
ρ = 19.84 g/cm³
Therefore, the density of glycerin at 60°C is 19.84 g/cm³, which rounds off to 19.8 g/cm³ (approximately).
Hence, the correct option is D) 20 g/cm³.
Learn more about volume coefficient here https://brainly.com/question/31598476
#SPJ11
Learning Goal: The Hydrogen Spectrum Electrons in hydrogen atoms are in the n=4 state (orbit). They can jump up to higher orbits or down to lower orbits. The numerical value of the Rydberg constant (determined from measurements of wavelengths) is R=1.097×107 m−1. Planck's constant is h=6.626×10−34 J⋅s, the speed of light in a vacuum is c=3×108 m/s. What is the LONGEST EMITTED wavelength? Express your answer in nanometers (nm),1 nm=10−9 m. Keep 1 digit after the decimal point. emitted λlongest = nm Part B What is the energy of the Emitted photon with the LONGEST wavelength? The photon energy should always be reported as positive. Express your answer in eV,1eV=1.6⋆10−19 J. Keep 4 digits after the decimal point. What is the SHORTEST ABSORBED wavelength? Express your answer in nanometers (nm),1 nm=10−9 m. Keep 1 digit after the decimal point.
Part A: To find the longest emitted wavelength, we will use the formula:1/λ = R [ (1/n12) - (1/n22) ]Where, R = Rydberg constantn1 = 4n2 = ∞ (for longest wavelength) Substituting the values,1/λ = (1.097 × 107 m⁻¹) [ (1/42) - (1/∞2) ]On solving,λ = 820.4 nm.
Therefore, the longest emitted wavelength is 820.4 nm. Part Bathed energy of the emitted photon with the longest wavelength can be found using the formulae = hoc/λ Where, h = Planck's constant = Speed of lightλ = Longest emitted wavelength Substituting the values = (6.626 × 10⁻³⁴ J s) (3 × 10⁸ m/s) / (820.4 × 10⁻⁹ m)E = 2.411 x 10⁻¹⁹ J.
Converting the energy to eV,E = 2.411 x 10⁻¹⁹ J x (1 eV / 1.6 x 10⁻¹⁹ J)E = 1.506 eV (approx.)Therefore, the energy of the emitted photon with the longest wavelength is 1.506 eV.
To know more about energy visit:
https://brainly.com/question/1932868
#SPJ11
choose corect one
13. The photoelectric effect is (a) due to the quantum property of light (b) due to the classical theory of light (c) independent of reflecting material (d) due to protons. 14. In quantum theory (a) t
The correct answer for the photoelectric effect is (a) due to the quantum property of light.
The photoelectric effect refers to the phenomenon where electrons are emitted from a material when it is exposed to light or electromagnetic radiation. It was first explained by Albert Einstein in 1905, for which he received the Nobel Prize in Physics
According to the quantum theory of light, light is composed of discrete packets of energy called photons. When photons of sufficient energy interact with a material, they can transfer their energy to the electrons in the material. If the energy of the photons is above a certain threshold, called the work function of the material, the electrons can be completely ejected from the material, resulting in the photoelectric effect.
The classical theory of light, on the other hand, which treats light as a wave, cannot fully explain the observed characteristics of the photoelectric effect. It cannot account for the fact that the emission of electrons depends on the intensity of the light, as well as the frequency of the photons.
The photoelectric effect is also dependent on the properties of the material being illuminated. Different materials have different work functions, which determine the minimum energy required for electron emission. Therefore, the photoelectric effect is not independent of the reflecting material.
So, option A is the correct answer.
To know more about photoelectric effect click on below link :
https://brainly.com/question/9260704#
#SPJ11
Please show working out.
2. A mass of a liquid of density \( \rho \) is thoroughly mixed with an equal mass of another liquid of density \( 2 \rho \). No change of the total volume occurs. What is the density of the liquid mi
When equal masses of a liquid with density ρ and another liquid with density 2ρ are mixed, the resulting liquid mixture has a density of 4/3ρ. Thus, option A, 4/3ρ, is the correct answer.
To determine the density of the liquid mixture, we need to consider the mass and volume of the liquids involved. Let's assume that the mass of each liquid is m and the density of the first liquid is ρ.
Since the mass of the first liquid is equal to the mass of the second liquid (m), the total mass of the mixture is 2m.
The volume of each liquid can be calculated using the density formula: density = mass/volume. Rearranging the formula, we have volume = mass/density.
For the first liquid, its volume is m/ρ.
For the second liquid, since its density is 2ρ, its volume is m/(2ρ).
When we mix the two liquids, the total volume remains unchanged. Therefore, the volume of the mixture is equal to the sum of the volumes of the individual liquids.
Volume of mixture = volume of first liquid + volume of second liquid
Volume of mixture = m/ρ + m/(2ρ)
Volume of mixture = (2m + m)/(2ρ)
Volume of mixture = 3m/(2ρ)
Now, to calculate the density of the mixture, we divide the total mass (2m) by the volume of the mixture (3m/(2ρ)).
Density of mixture = (2m) / (3m/(2ρ))
Density of mixture = 4ρ/3m
Since we know that the mass of the liquids cancels out, the density of the mixture simplifies to:
Density of mixture = 4ρ/3
Therefore, the density of the liquid mixture is 4/3ρ, which corresponds to option A.
To know more about the liquid mixture refer here,
https://brainly.com/question/30101907#
#SPJ11
Complete question :
A mass of a liquid of density ρ is thoroughly mixed with an equal mass of another liquid of density 2ρ. No change of the total volume occurs. What is the density of the liquid mixture? A. 4/3ρ B. 3/2ρ C. 5/3ρ D. 3ρ
Located in phys lab of London. consider a parallel-plate capacitor made up of two conducting
plates with dimensions 12 mm × 47 mm
If the separation between the plates is 0.75 mm, what is the capacitance, in F, between them? If there is 0.25 C of charged stored on the positive plate, what is the potential, in volts, across
the capacitor which is also in London?
What is the magnitude of the electric field, in newtons per coulomb, inside this capacitor? If the separation between the plates doubles, what will the electric field be if the charge is kept
constant?
The capacitance is 0.088 μF. The Potential difference, V = 2836.36 V. The magnitude of the electric field between the plates is 3,781,818.18 V/m. After changing the separation between the plate, the new electric field will be: E = (1/2) × 3,781,818.18 V/m = 1,890,909.09 V/m.
Capacitance is defined as the ability of a system to store an electric charge. Capacitor, on the other hand, is an electronic device that has the ability to store electrical energy by storing charge on its plates. It is made up of two parallel plates separated by a distance d.
The capacitance of a parallel-plate capacitor is given by the formula: Capacitance, C = ε0A/d where ε0 is the permittivity of free space, A is the area of the plates and d is the separation between the plates. The capacitance can be found using the given values as: C = ε0A/d = 8.85 × 10-12 F/m × (0.012 m × 0.047 m)/(0.00075 m) = 0.088 μF. If there is a charge of 0.25 C stored on the positive plate, then the potential difference between the plates can be found using the formula: Potential difference, V = Q/CC = Q/V = 0.25 C/0.088 μF = 2836.36 V.
The magnitude of the electric field between the plates can be found using the formula: Electric field, E = V/d = 2836.36 V/0.00075 m = 3,781,818.18 V/m. If the separation between the plates doubles, the capacitance is halved, i.e. the new capacitance will be 0.044 μF. Since the charge is kept constant, the new potential difference will be: V = Q/CC = Q/V = 0.25 C/0.044 μF = 5681.82 V. The electric field is inversely proportional to the distance between the plates, so if the separation between the plates doubles, the electric field will be halved.
Therefore, the new electric field will be: E = (1/2) × 3,781,818.18 V/m = 1,890,909.09 V/m.
Let's learn more about capacitance:
https://brainly.com/question/24242435
#SPJ11
An alien pilot of an intergalactic spaceship is traveling at 0.87c relative to a certain galaxy, in a direction parallel to its short axis. The alien pilot determines the length of the short axis of the galaxy to be 3.0 × 10^17 km. What would the length of this axis be as measured by an observer living on a planet within the galaxy?
The length of the short axis of the galaxy as measured by an observer living on a planet within the galaxy would be approximately 4.1 × 10^17 km.
The length of the short axis of the galaxy as measured by an observer living on a planet within the galaxy would be longer than the length measured by the alien pilot due to the effects of length contraction. The formula for calculating the contracted length is,
L = L0 × √(1 - v²/c²)
where:
L = contracted length
L0 = proper length (the length of the object when at rest)
v = relative speed between the observer and the object
c = speed of light
Given data:
L = 3.0 × 10¹⁷ km
v = 0.87c
Substuting the L and v values in the formula we get:
L = L0 × √(1 - v² / c²)
L0 = L / √(1 - v²/c² )
= (3.0 × 10¹⁷ km) / √(1 - (0.87c)²/c²)
= (3.0 × 10¹⁷km) /√(1 - 0.87²)
= 4.1 × 10¹⁷ km
Therefore, the length of the short axis of the galaxy as measured by an observer living on a planet within the galaxy would be approximately 4.1 × 10^17 km.
To learn more about length contraction:
https://brainly.com/question/17407131
#SPJ4
(a) In brief terms, provide an account of nuclear instability, making use of the Nuclear chart "Segré chart" to illustrate your answer. (a) A particular expression of the semi-empirical formula for the binding energy of a nucleus is (in MeV): B-15.5 A-16.842) - 0.72 Z+/A!) – 19(N=Z)'/A Discuss the origin of each ten
Nuclear instability refers to the tendency of certain atomic nuclei to undergo decay or disintegration due to an imbalance between the forces that hold the nucleus together and the forces that repel its constituents.
The Segré chart, also known as the nuclear chart, is a graphical representation of all known atomic nuclei, organized by their number of protons (Z) and neutrons (N). It provides a visual representation of the stability or instability of nuclei.
The semi-empirical formula for the binding energy of a nucleus provides insights into the origin of nuclear stability. The formula is given by B = (15.5A - 16.842) - 0.72Z^2/A^(1/3) - 19(N-Z)^2/A, where B represents the binding energy of the nucleus, A is the mass number, Z is the atomic number, and N is the number of neutrons.
The terms in the formula have specific origins. The first term, 15.5A - 16.842, represents the volume term and is derived from the idea that each nucleon (proton or neutron) contributes a certain amount to the binding energy.
The second term, -0.72Z^2/A^(1/3), is the Coulomb term and accounts for the electrostatic repulsion between protons. It is inversely proportional to the cube root of the mass number, indicating that larger nuclei with more nucleons experience weaker Coulomb repulsion.
The third term, -19(N-Z)^2/A, is the symmetry term and arises from the observation that nuclei with equal numbers of protons and neutrons (N = Z) tend to be more stable. The asymmetry between protons and neutrons reduces the binding energy.
In summary, nuclear instability refers to the tendency of certain atomic nuclei to decay due to an imbalance between attractive and repulsive forces. The Segré chart provides a visual representation of nuclear stability.
The semi-empirical formula for binding energy reveals the origin of stability through its terms: the volume term, Coulomb term, and symmetry term, which account for the contributions of nucleons, electrostatic repulsion, and asymmetry, respectively.
Learn more about asymmetry here
brainly.com/question/30639121
#SPJ11
Δ 1 12 Consider two parallel wires where 11 is 16.1 amps, and 12 is 29.3 amps. The location A is in the plane of the two wires and is 30.0 mm from the left wire and 13.9 mm from the right wire. Given the direction of current in each wire, what is the B-field at the location A in micro Teslas? (If the B-field points toward you, make it positive; if it points away from you, make it negative. Give answer as an integer with correct sign. Do not enter unit.)
The magnetic field (B-field) at location A is -3 micro Teslas.
To calculate the magnetic field at location A, we'll use the formula for the magnetic field created by a current-carrying wire. The formula states that the magnetic field is directly proportional to the current and inversely proportional to the distance from the wire.
For the left wire, the distance from A is 30.0 mm (or 0.03 meters), and the current is 16.1 amps. For the right wire, the distance from A is 13.9 mm (or 0.0139 meters), and the current is 29.3 amps.
Using the formula, we can calculate the magnetic field created by each wire individually. The B-field for the left wire is (μ₀ * I₁) / (2π * r₁), where μ₀ is the magnetic constant (4π × 10^(-7) T m/A), I₁ is the current in the left wire (16.1 A), and r₁ is the distance from A to the left wire (0.03 m). Similarly, the B-field for the right wire is (μ₀ * I₂) / (2π * r₂), where I₂ is the current in the right wire (29.3 A) and r₂ is the distance from A to the right wire (0.0139 m).
Calculating the magnetic fields for each wire, we find that the B-field created by the left wire is approximately -13.5 micro Teslas (pointing away from us), and the B-field created by the right wire is approximately +9.5 micro Teslas (pointing towards us). Since the B-field is a vector quantity, we need to consider the direction as well. Since the wires are parallel and carry currents in opposite directions, the B-fields will have opposite signs.
To find the net magnetic field at location A, we add the magnetic fields from both wires. (-13.5 + 9.5) ≈ -4 micro Teslas. Hence, the B-field at location A is approximately -4 micro Teslas, pointing away from us.
To learn more about magnetic field click here:
brainly.com/question/14848188
#SPJ11
DEPARTMENT OF PHYSICS NO. 3: R. (12 POINTS) A projectile is launched from the origin with an initial velocity 3 = 207 + 20. m/s. Find the (a) (2 points) initial projection angle, (b) (2 points) velocity vector of the projectile after 3 seconds of launching (c) (3 points) position vector of the projectile after 3 seconds of launching, (d) (2 points) time to reach the maximum height, (e) (1 point) time of flight (1) (2 points) maximum horizontal range reached.
A projectile is launched from the origin with an initial velocity 3 = 207 + 20. m/s. Therefore :
(a) The initial projection angle is 53.13°.
(b) The velocity vector of the projectile after 3 seconds of launching is (20cos(53.13), 20sin(53.13)) = (14.24, 14.14) m/s.
(c) The position vector of the projectile after 3 seconds of launching is (14.243, 14.143) = (42.72, 42.42) m.
(d) The time to reach the maximum height is 1.5 seconds.
(e) The time of flight is 3 seconds.
(f) The maximum horizontal range reached is 76.6 meters.
Here are the steps involved in solving for each of these values:
(a) The initial projection angle can be found using the following equation:
tan(Ф) = [tex]v_y/v_x[/tex]
where [tex]v_y[/tex] is the initial vertical velocity and [tex]v_x[/tex] is the initial horizontal velocity.
In this case, [tex]v_y[/tex] = 20 m/s and [tex]v_x[/tex] = 20 m/s. Therefore, Ф = [tex]\tan^{-1}\left(\frac{20}{20}\right)[/tex] = 53.13°.
(b) The velocity vector of the projectile after 3 seconds of launching can be found using the following equation:
v(t) = v₀ + at
where v(t) is the velocity vector at time t, v₀ is the initial velocity vector, and a is the acceleration vector.
In this case, v₀ = (20cos(53.13), 20sin(53.13)) and a = (0, -9.8) m/s². Therefore, v(3) = (14.24, 14.14) m/s.
(c) The position vector of the projectile after 3 seconds of launching can be found using the following equation:
r(t) = r₀ + v₀t + 0.5at²
where r(t) is the position vector at time t, r₀ is the initial position vector, v0 is the initial velocity vector, and a is the acceleration vector.
In this case, r₀ = (0, 0) and v₀ = (14.24, 14.14) m/s. Therefore, r(3) = (42.72, 42.42) m.
(d) The time to reach the maximum height can be found using the following equation:
v(t) = 0
where v(t) is the velocity vector at time t.
In this case, v(t) = (0, -9.8) m/s. Therefore, t = 1.5 seconds.
(e) The time of flight can be found using the following equation:
t = 2v₀ / g
where v₀ is the initial velocity and g is the acceleration due to gravity.
In this case, v₀ = 20 m/s and g = 9.8 m/s². Therefore, t = 3 seconds.
(f) The maximum horizontal range reached can be found using the following equation:
R = v² / g
where R is the maximum horizontal range, v is the initial velocity, and g is the acceleration due to gravity.
In this case, v = 20 m/s and g = 9.8 m/s². Therefore, R = 76.6 meters.
To know more about the projectile refer here,
https://brainly.com/question/28043302#
#SPJ11
Please Help
A simple ac circuit is composed of an inductor connected across the terminals of an ac power source. If the frequency of the source is halved, what happens to the reactance of the inductor? It is unch
When the frequency of an AC power source is halved in a simple AC circuit with an inductor, the reactance of the inductor increases.
The reactance of an inductor is directly proportional to the frequency of the AC power source. Reactance is the opposition that an inductor presents to the flow of alternating current. It is determined by the formula Xl = 2πfL, where Xl is the inductive reactance, f is the frequency, and L is the inductance.
When the frequency is halved, the value of f in the formula decreases. As a result, the inductive reactance increases. This means that the inductor offers greater opposition to the flow of current, causing the current to be impeded.
Halving the frequency of the AC power source effectively reduces the rate at which the magnetic field in the inductor changes, leading to an increase in the inductive reactance. It is important to consider this relationship between frequency and reactance when designing and analyzing AC circuits with inductors.
In conclusion, when the frequency of an AC power source is halved in a simple AC circuit with an inductor, the reactance of the inductor increases, resulting in greater opposition to the flow of current.
To know more about Frequency visit-
brainly.com/question/14320803
#SPJ11
1. (1 p) An object has a kinetic energy of 275 J and a linear momentum of 25 kg m/s. Determine the speed and mass of the object.
An object has a kinetic energy of 275 J and a linear momentum of 25 kg m/s. The speed and mass of the object is 1.136 m/s and 22 kg respectively.
To determine the speed and mass of the object, we can use the formulas for kinetic energy and linear momentum.
Kinetic Energy (KE) = (1/2) × mass (m) × velocity squared (v²)
Linear Momentum (p) = mass (m) × velocity (v)
Kinetic Energy (KE) = 275 J
Linear Momentum (p) = 25 kg m/s
From the equation for kinetic energy, we can solve for velocity (v):
KE = (1/2) × m × v²
2 × KE = m × v²
2 × 275 J = m × v²
550 J = m × v²
From the equation for linear momentum, we have:
p = m × v
v = p / m
Plugging in the given values of linear momentum and kinetic energy, we have:
25 kg m/s = m × v
25 kg m/s = m × (550 J / m)
m = 550 J / 25 kg m/s
m = 22 kg
Now that we have the mass, we can substitute it back into the equation for velocity:
v = p / m
v = 25 kg m/s / 22 kg
v = 1.136 m/s
Therefore, the speed of the object is approximately 1.136 m/s, and the mass of the object is 22 kg.
To know more about kinetic energy here
https://brainly.com/question/999862
#SPJ4
2. Two closeby speakers produce sound waves. One of the speakers vibrates at 400 Hz. What would be the frequency of the other speaker, which produces 10 Hz of beats? A. 10 Hz B. 390 Hz C. 410 Hz
Summary:
The frequency of the other speaker would be 390 Hz. When two closeby speakers produce sound waves, a phenomenon known as beats can occur. Beats are the periodic variations in the intensity or loudness of sound that result from the interference of two waves with slightly different frequencies.
Explanation:
In this case, if one speaker vibrates at 400 Hz and the beats have a frequency of 10 Hz, it means that the frequency of the other speaker is slightly different. The beat frequency is the difference between the frequencies of the two speakers. So, by subtracting the beat frequency of 10 Hz from the frequency of one speaker (400 Hz), we find that the frequency of the other speaker is 390 Hz.
To understand this concept further, let's delve into the explanation. When two sound waves with slightly different frequencies interact, they undergo constructive and destructive interference, resulting in a periodic variation in the amplitude of the resulting wave. This variation is what we perceive as beats. The beat frequency is equal to the absolute difference between the frequencies of the two sound waves. In this case, the given speaker has a frequency of 400 Hz, and the beat frequency is 10 Hz. By subtracting the beat frequency from the frequency of the given speaker (400 Hz - 10 Hz), we find that the frequency of the other speaker is 390 Hz. This frequency creates the interference pattern that produces the 10 Hz beat frequency when combined with the 400 Hz wave. Therefore, the correct answer is B. 390 Hz.
Learn more about Periodic Variations here brainly.com/question/15295474
#SPJ11
What is the dose in rem for each of the following? (a) a 4.39 rad x-ray rem (b) 0.250 rad of fast neutron exposure to the eye rem (c) 0.160 rad of exposure rem
The dose in rem for each of the following is:(a) 4.39 rem(b) 5.0 rem(c) 0.160 rem. The rem is the traditional unit of dose equivalent.
It is the product of the absorbed dose, which is the amount of energy deposited in a tissue or object by radiation, and the quality factor, which accounts for the biological effects of the specific type of radiation.A rem is equal to 0.01 sieverts, the unit of measure in the International System of Units (SI). The relationship between the two is based on the biological effect of radiation on tissue. Therefore:
Rem = rad × quality factor
(a) For a 4.39 rad x-ray, the dose in rem is equal to 4.39 rad × 1 rem/rad = 4.39 rem
(b) For 0.250 rad of fast neutron exposure to the eye, the dose in rem is 0.250 rad × 20 rem/rad = 5.0 rem
(c) For 0.160 rad of exposure, the dose in rem is equal to 0.160 rad × 1 rem/rad = 0.160 rem
The dose in rem for each of the following is:(a) 4.39 rem(b) 5.0 rem(c) 0.160 rem.
To know more about International System of Units visit-
brainly.com/question/30404877
#SPJ11
A 3.0 kg falling rock has a kinetic energy equal to 2,430 J. What is its speed?
The speed of the falling rock can be determined by using the equation for kinetic energy: KE = 0.5 * m * v^2, the speed of the falling rock is approximately 40.25 m/s.
The kinetic energy of the rock is 2,430 J and the mass is 3.0 kg, we can rearrange the equation to solve for the speed:
v^2 = (2 * KE) / m
Substituting the given values:
v^2 = (2 * 2,430 J) / 3.0 kg
v^2 ≈ 1,620 J / kg
Taking the square root of both sides, we find:
v ≈ √(1,620 J / kg)
v ≈ 40.25 m/s
Therefore, the speed of the falling rock is approximately 40.25 m/s.
Learn more about mass here:
brainly.com/question/11954533
#SPJ11
The
speed of a car is found by dividing the distance traveled by the
time required to travel that distance. Consider a car that traveled
18.0 miles in 0.969 hours. What's the speed of car in km / h
(k
The speed of the car is approximately 29.02 km/h, given that it traveled 18.0 miles in 0.969 hours.
To convert the speed of the car from miles per hour to kilometers per hour, we need to use the conversion factor that 1 mile is equal to 1.60934 kilometers.
Given:
Distance traveled = 18.0 milesTime taken = 0.969 hoursTo calculate the speed of the car, we divide the distance traveled by the time taken:
Speed (in miles per hour) = Distance / Time
Speed (in miles per hour) = 18.0 miles / 0.969 hours
Now, we can convert the speed from miles per hour to kilometers per hour by multiplying it by the conversion factor:
Speed (in kilometers per hour) = Speed (in miles per hour) × 1.60934
Let's calculate the speed in kilometers per hour:
Speed (in kilometers per hour) = (18.0 miles / 0.969 hours) × 1.60934
Speed (in kilometers per hour) = 29.02 km/h
Therefore, the speed of the car is approximately 29.02 km/h.
The complete question should be:
The speed of a car is found by dividing the distance traveled by the time required to travel that distance. Consider a car that traveled 18.0 miles in 0.969 hours. What's the speed of car in km / h (kilometer per hour)?
To learn more about speed, Visit:
https://brainly.com/question/13262646
#SPJ11
2. Sodium Chloride is found easily in nature. Write the electron configuration of Nall and C1¹7.
The electron configuration of Na is 1s² 2s² 2p⁶ 3s¹, and the electron configuration of Cl is 1s² 2s² 2p⁶ 3s² 3p⁵. Sodium (Na) has 11 electrons, with one electron in its outermost shell, while chlorine (Cl) has 17 electrons, with seven electrons in its outermost shell.
The electron configuration of an atom represents the arrangement of its electrons in different energy levels or shells. In the case of sodium (Na), it has an atomic number of 11, indicating that it has 11 electrons. The electron configuration of Na is 1s² 2s² 2p⁶ 3s¹.
This means that the first energy level (1s) contains two electrons, the second energy level (2s) contains two electrons, the second energy level (2p) contains six electrons, and the third energy level (3s) contains one electron.
Chlorine (Cl) has an atomic number of 17, which means it has 17 electrons. The electron configuration of Cl is 1s² 2s² 2p⁶ 3s² 3p⁵. Similar to sodium, the first energy level (1s) contains two electrons, the second energy level (2s) contains two electrons, and the second energy level (2p) contains six electrons.
These electron configurations reveal the number and arrangement of electrons in the outermost shell, also known as the valence shell. For Na, its valence electron is in the 3s orbital, and for Cl, its valence electrons are in the 3s and 3p orbitals. These valence electrons are involved in chemical reactions, such as the formation of ionic compounds like sodium chloride (NaCl).
To learn more about electrons click here brainly.com/question/12001116
#SPJ11
Explain each of the following cases of magnification. magnification (M) M>1, M<1 and M=1 explain how you can find the image of a faraway object using a convex lens. Where will the image be formed?
What lens is used in a magnifying lens? Explain the working of a magnifying lens.
Magnification (M) refers to the degree of enlargement or reduction of an image compared to the original object. When M > 1, the image is magnified; when M < 1, the image is reduced; and when M = 1, the image has the same size as the object.
To find the image of a faraway object using a convex lens, a converging lens is typically used. The image will be formed on the opposite side of the lens from the object, and its location can be determined using the lens equation and the magnification formula.
A magnifying lens is a convex lens with a shorter focal length. It works by creating a virtual, magnified image of the object that appears larger when viewed through the lens.
1. M > 1 (Magnification): When the magnification (M) is greater than 1, the image is magnified. This means that the size of the image is larger than the size of the object. It is commonly observed in devices like magnifying glasses or telescopes, where objects appear bigger and closer.
2. M < 1 (Reduction): When the magnification (M) is less than 1, the image is reduced. In this case, the size of the image is smaller than the size of the object. This type of magnification is used in devices like microscopes, where small objects need to be viewed in detail.
3. M = 1 (Unity Magnification): When the magnification (M) is equal to 1, the image has the same size as the object. This occurs when the image and the object are at the same distance from the lens. It is often seen in simple lens systems used in photography or basic optical systems.
To find the image of a faraway object using a convex lens, a converging lens is used. The image will be formed on the opposite side of the lens from the object. The location of the image can be determined using the lens equation:
1/f = 1/d₀ + 1/dᵢ
where f is the focal length of the lens, d₀ is the object distance, and dᵢ is the image distance. By rearranging the equation, we can solve for dᵢ:
1/dᵢ = 1/f - 1/d₀
The magnification (M) can be calculated using the formula:
M = -dᵢ / d₀
A magnifying lens is a convex lens with a shorter focal length. It works by creating a virtual, magnified image of the object that appears larger when viewed through the lens. This is achieved by placing the object closer to the lens than its focal length.
To learn more about Magnification click here brainly.com/question/21370207
#SPJ11
Consider a series RLC circuit having the parameters R=200Ω L=663mH , and C=26.5µF. The applied voltage has an amplitude of 50.0V and a frequency of 60.0Hz. Find (d) the maximum voltage ΔVL across the inductor and its phase relative to the current.
The maximum voltage [tex]ΔVL[/tex]across the inductor is approximately 19.76V, and its phase relative to the current is 90 degrees.
To find the maximum voltage [tex]ΔVL[/tex]across the inductor and its phase relative to the current, we can use the formulas for the impedance of an RLC circuit.
First, we need to calculate the angular frequency ([tex]ω[/tex]) using the given frequency (f):
[tex]ω = 2πf = 2π * 60 Hz = 120π rad/s[/tex]
Next, we can calculate the inductive reactance (XL) and the capacitive reactance (XC) using the formulas:
[tex]XL = ωL = 120π * 663mH = 79.04Ω[/tex]
[tex]XC = 1 / (ωC) = 1 / (120π * 26.5µF) ≈ 0.1Ω[/tex]
Now, we can calculate the total impedance (Z) using the formulas:
[tex]Z = √(R^2 + (XL - XC)^2) ≈ 200Ω[/tex]
The maximum voltage across the inductor can be calculated using Ohm's Law:
[tex]ΔVL = I * XL[/tex]
We need to find the current (I) first. Since the applied voltage has an amplitude of 50.0V, the current amplitude can be calculated using Ohm's Law:
[tex]I = V / Z ≈ 50.0V / 200Ω = 0.25A[/tex]
Substituting the values, we get:
[tex]ΔVL = 0.25A * 79.04Ω ≈ 19.76V[/tex]
The phase difference between the voltage across the inductor and the current can be found by comparing the phase angles of XL and XC. Since XL > XC, the voltage across the inductor leads the current by 90 degrees.
To know more about inductor visit:
https://brainly.com/question/31503384
#SPJ11
A skater spins at an initial angular velocity of 11 rads/s with his arms outstretched. The skater then lowers his arms, thereby decreasing his moment of inertia by a factor 5. What is the skater's final angular velocity? Assume that any friction between the skater's skates and the ice is negligible.
The skater's final angular velocity is 55 rad/s.
We can apply the principle of conservation of angular momentum to solve this problem. According to this principle, the initial and final angular momentum of the skater will be equal.
The formula for angular momentum is given by:
L = I * ω
where
L is the angular momentum,
I is the moment of inertia, and
ω is the angular velocity.
The skater starts with an angular velocity of 11 rad/s and his arms are outstretched. [tex]I_i_n_i_t_i_a_l[/tex] will be used to represent the initial moment of inertia.
The skater's moment of inertia now drops by a factor of 5 as he lowers his arms. Therefore, [tex]I_f_i_n_a_l[/tex]= [tex]I_i_n_i_t_i_a_l[/tex] / 5 can be used to express the final moment of inertia.
According to the conservation of angular momentum:
[tex]L_i=L_f[/tex] (where i= initial, f= final)
[tex]I_i *[/tex]ω[tex]_i[/tex] = I[tex]_f[/tex] *ω[tex]_f[/tex]
Substituting the given values:
[tex]I_i[/tex]* 11 = ([tex]I_i[/tex] / 5) * ω_f
11 = ω[tex]_f[/tex] / 5
We multiply both the sides by 5.
55 = ω[tex]_f[/tex]
Therefore, the skater's final angular velocity is 55 rad/s.
Learn more about angular momentum, here:
https://brainly.com/question/29563080
#SPJ4