A skier with mass of 62kg is sliding down a snowy slope. Find the coefficient of kinetic friction for the skier if friction is known to be 45. 0​

"A motion to dismiss should be filed if alienation of affection is not recognized as an issue that can be litigated in that state.

In physics, motion is defined as a change in a body's position or orientation over time. Translation is the term for motion along a line or a curve. Rotation is another motion that modifies a body's orientation.

The four types of motion are: linear, rotary reciprocating and oscillating.

Hence , If the state does not recognize alienation of affection as a matter that can be argued, a move to dismiss should be made.

To know more  about motion here

https://brainly.com/question/22810476

#SPJ4

The question is incomplete, the complete question is:

"His state no longer recognizes alienation of affection as an issue that can be litigated. Which Motion should be filed ?

Research demonstrates that group problem-solving produces superior results. If they have a team player behind them, people are more inclined to take calculated risks that result in innovation.

Working as a team promotes the development of the individual, boosts job satisfaction, and lessens stress. Be upbeat and do your best to assist people. Everyone will appreciate your cooperation and willingness to put in a lot of effort, even your boss.

To know more about team players click here: brainly.com/question/15836802

#SPJ4

The density of the object (weighing 297 N in air is immersed in water after being tied to a string connected to a balance, the scale now reads 264 N immersed in oil, the object appears to weigh 272 N) is:

(1) The density of the object = 9,181.81 kg/m³

(2) The density of oil = 773.03 kg/m³

The buoyant force is the upward force that a fluid exerts on an object. Archimedes' Principle states that buoyant force equals the weight of the displaced fluid.

To determine the density of an object:

First, we'd calculate the buoyant force acting on the object using the formula:

Fb = Fa - Fw

Where,

Fb = buoyant force (N)

Fa = the weight of object in air (N)

Fw = the weight of object in water (N)

= 297 - 264

= 33 N

Now, determine the volume of the object:

V = Fb/ρg

= 33 / (1000) (9.8)

= 0.0033 m³

The mass of the object in air:

Ma = Fa/g

= 297 / 9.8

= 30.30 kg

Hence,

So, the density of the object:

ρ = m/v

= 30.30 / 0.0033

= 9,181.81 kg/m³

The buoyant force in oil:

Fb = Fa = Fo

= 297 - 272

= 25 N

ρ = fb/vg

= 25 / (0.0033 ) (9.8)

= 0.03234

= 773.03 kg/m³

So, the density in oil = 773.03 kg/m³

The question is incomplete, it should be:

An object weighing 297 N in air is immersed in water after being tied to a string connected to a balance. the scale now reads 264 N, immersed in oil, the object appears to weigh 272 N, find the density of the object. answer in units of kg/m3 .

Find the density of the object.

Answer in units of kg/m³

PART TWO

Find the density of the oil.

Answer in units of kg/m³

Learn more about density here: https://brainly.com/question/952755

#SPJ4

Answer:

Weight

Explanation:

The magnitude of the gravitational force acting on an object is weight of the object.

Answer: Option B

Explanation:

Any kind of force is a vector quantity having magnitude and direction. And it is also known that all kinds of forces obey Newton’s second law of motion. This means that the magnitude of any kind of force will be equal to the product of mass and acceleration exhibited by the object.

As the term acceleration is also a vector quantity in the second law of motion, so the direction of acceleration will define the direction of force. Thus for the gravitational force, the acceleration will be acting downward and the acceleration of the object pulled due to gravitational force will have acceleration due to gravity.

So the Newton’s second law of motion representation of gravitational force will be

Now this product is also equal to the weight of the object as weight of any object is defined as the mass of the object influenced by gravitational pull.

Answer: The dissipative component of evolution is in a direction of steepest entropy ascent

Explanation:

According to our definition, every non-equilibrium state of a system or local subsystem for which entropy is well defined must be equipped with a metric in state space with respect to which the irreversible component of its time evolution is in the direction of the steepest entropy ascent permissible under the conservation constraints. We derive (nonlinear) expansions of Onsager reciprocity and fluctuation-dissipation relations to the far-non-equilibrium world inside the rate-controlled constrained-equilibrium approximation to demonstrate the force of the fourth law (also known as the quasi-equilibrium approximation).

The gravitational potential energy (GPE) of an object is given by the equation:

GPE = mgh

where m is the mass of the object, g is the acceleration due to gravity ([tex]9.8 m/s^2[/tex] on the surface of the Earth), and h is the height of the object relative to some reference point.

To calculate the GPE of the child relative to the child's lowest position, we need to know the height of the child at different positions of the swing.

When the ropes are horizontal: The height of the child is the same as the lowest position, which is considered to be zero. So, the GPE is 0 J (Joules).

When the ropes make a 30-degree angle with vertical: The height of the child is [tex]h = 2 * sin(30) = 1 m[/tex] (using the sine function, where the angle is measured in radians)

At the bottom of the circular arc: The height of the child is[tex]h = 2 * (1-cos(30)) = 0.866 m[/tex] (using the cosine function, where the angle is measured in radians)

So the GPE of the child relative to the child's lowest position:

At the horizontal position: GPE [tex]= 40 * 9.8 * 0 = 0 J[/tex]

At the 30-degree angle with the vertical: GPE[tex]= 40 * 9.8 * 1 = 392 J[/tex]

At the bottom of the circular arc: GPE [tex]= 40 * 9.8 * 0.866 = 337.44 J[/tex]

Gravitational potential energy (GPE) is the energy possessed by an object as a result of its position in a gravitational field. It is the energy an object has due to its height above a reference point and is directly related to the force of gravity acting on the object. The greater the height of an object, the more potential energy it possesses.

The formula for gravitational potential energy is:

GPE = mgh

where m is the mass of the object, g is the acceleration due to gravity, and h is the height of the object relative to the reference point.

For example, when an object is lifted from the ground to a height h, it gains GPE equal to mgh. Similarly, when an object is allowed to fall from a height of h, it loses GPE as it converts that energy into other forms like kinetic energy.

GPE is a scalar quantity and its unit is Joule(J). It is important to note that the reference point chosen will affect the value of GPE, but it doesn't affect the relative changes in GPE.

To know more about acceleration visit: https://brainly.com/question/2303856

#SPJ4

1. The deceleration of the aeroplane in the 35s is -1.6m/s²

2. The force acting on the aeroplane is 4.0× 10⁵N

3. The momentum of the aeroplane when its speed is 6.0m/s is 15 ×10⁶kgm/s

The equation of motion are used in solving problems related to motion. The equations of motion are

1. v = u+ at

2 S = ut + 1/2at²

3. v² = u²+2as

where v is the final velocity

u is the initial velocity

S is the distance

t is time

a is the acceleration

The deceleration of the plane after 35s can be calculated as;

v = u+at

v= 6m/s, u= 62m/s , t = 35s

6 = 62+35a

35a = 6-62

35a =- 56

a = - 56/35

a = -1.6m/s²

the negative sign shows that the plane decelerates.

The force acting on the plane is calculated as;

F = ma

F = 2.5×10⁵× 1.6

F = 4× 10⁵N

The momentum of the plane at 6m/s is ;

p = mv

p = 2.5×10⁵ × 6

p = 1.5× 10⁶ kgm/s

learn more about equation of motion from

https://brainly.com/question/25951773

#SPJ1

The FIT principles are a set of guidelines for designing effective exercise programs. They include:

Frequency: How often you perform the exercise. To improve flexibility, aim to stretch at least 2-3 times per week.

Intensity: How hard you work during the exercise. When stretching, intensity should be moderate and not painful.

Time: How long you perform the exercise. Hold each stretch for 15-30 seconds and repeat each stretch 2-4 times.

Type: The specific exercises you perform. Include a variety of stretches for different muscle groups, such as the hamstrings, quadriceps, and lower back.

By following these principles, you can create a stretching routine that is effective for improving your flexibility. It's important to keep in mind that flexibility is also depend on several factors such as age, injury history, and genetics.

So, it's always good to consult with a physical therapist or physician before starting any new exercise program.

Learn more about FIT principle on:

https://brainly.com/question/17042591

#SPJ1

The correct statement would be that the wavelength is 2L and there is a displacement node at the pipe's mid point, if L is the length of the open pipe.

The fundamental frequency is the smallest resonant frequency of a vibrating object. Most of the vibrating objects possess more than one resonant frequency and which are used in musical instruments. On the other hand, a harmonic is defined as an integer multiple of the fundamental frequency.

Vibrating strings, open pipe, and conical air columns vibrate at all harmonics of the fundamental. Cylinders with only one end opened vibrate with only odd harmonics of the fundamental.

Hence the correct option is A.

--The given question is incomplete, the complete question is:

"The pipe of length L that is open at both ends is resonating at its fundamental frequency. which statement about sound is correct? A) The wavelength is 2L and there is a displacement node at the pipe's mid point. B) the wavelength is L and there is a displacement antinode at the pipe's mid point C) the wavelength is 2L and there is a displacement antinode at the pipe's mid point D) the wavelength is L and there is a displacement node at the pipe's mid point

To know more about wavelength, here

https://brainly.com/question/13533093

#SPJ4

The angular velocity is infinity.

it's not possible to calculate the kinetic energy change when the angular velocity becomes infinity, it's an abstract concept.

PART 1

The angular velocity of an object is given by the formula:

ω = v/r

where

v is the linear velocity and

r is the distance from the axis of rotation.

The man's initial angular velocity is:

ω = (0.37 rev/s) * (2π rad/rev)

= 2.34 rad/s

As the man moves closer to the center, his distance from the axis of rotation decreases, so his angular velocity will increase.

To find the new angular velocity, we can use the same formula:

ω = v/r

since the radius decreases to 0, the angular velocity becomes infinity.

PART 2

The change in kinetic energy is given by the formula:

ΔK = 1/2 * I * (ω_f^2 - ω_i^2)

where

For a solid cylinder, the moment of inertia is:

I = (1/2) * m * r^2

where

The moment of inertia for the merry-go-round is:

I = (1/2) * (29 kg) * (1.2 m)^2

= 15.12 kg * m^2

The change in kinetic energy can be calculated as:

ΔK = 1/2 * (15.12 kg * m^2) * (∞^2 - (2.34 rad/s)^2)

= infinity J

Note that it's not possible to calculate the kinetic energy change when the angular velocity becomes infinity, it's an abstract concept.

Read more about angular speed

https://brainly.com/question/14663644

#SPJ1

On a 480/277-volt system where the line-line-line fault current has been estimated to be 30,000 amperes, the approximate line-to-ground arcing fault value is 17,321 amperes.

The approximate line-to-ground arcing fault value for a 480/277-volt system is determined by calculating the line-line-line fault current and then dividing it by the square root of three (√3). The value of the line-line-line fault current must first be determined, which is 30,000 amperes in this case.

Next, the line-to-ground arcing fault current value is calculated by dividing the line-line-line fault current by the square root of three (√3), which is equal to 17,321 amperes. To arrive at this number, we use the following formula:

Line-to-ground arcing fault current = line-line-line fault current / √3

Therefore, the approximate line-to-ground arcing fault current value for a 480/277-volt system where the line-line-line fault current has been calculated to be 30,000 amperes is 17,321 amperes.

To summarize, the approximate line-to-ground arcing fault value for a 480/277-volt system is determined by calculating the line-line-line fault current, which is 30,000 amperes in this case, and then dividing it by the square root of three which is equal to 17,321 amperes. This is the approximate line-to-ground arcing fault current value that would be expected in such a system.

Learn more about arcing fault value here:

https://brainly.com/question/30018655

#SPJ4

Height contours are used to indicate horizontal changes in altitude on a chart with a 500 millibar scale, which are equivalent to changes in pressure on the same horizontal axis.

The complete question is,

In order to depict horizontal changes in altitude that correlate to horizontal changes in pressure on a chart with a 500 millibar scale, ___ are used.

the isobars and the jet streams

d. height contours; c. isotachs.

To learn more about horizontal pressure refer to:

https://brainly.com/question/1909144

#SPJ4

It is true that a vector's component can vary depending on the chosen coordinate system, that a vector can be multiplied by a scalar, and that a vector can have a component equal to 0 even if its magnitude is not 0.

The idea that a vector cannot have a different direction in different coordinate systems is untrue. A physical quantity that exists without us is represented by a vector. As a result, the vector itself is independent of the coordinate system we use. However, the vector's coordinates are affected by the coordinate system. Only when two vectors have the same magnitude and direction are they regarded as being equal. The coordinate system has no influence on a vector.

To learn more about magnitude click here https://brainly.com/question/30098658

#SPJ4

The time required for the rock to reach the ground is 1.11 second.

Acceleration is rate of change of velocity with time. Due to having both direction and magnitude, it is a vector quantity. Si unit of acceleration is meter/second² (m/s²).

Initial height of the rock: h = 6.00 m.

Acceleration due to gravity: g = 9.8 m/s²

Let,  the time required for the rock to reach the ground is = t.

Then:

h = 1/2 × gt²

t = √(2h/g)

= √ {(2 × 6.00)/9.8} second.

= 1.11 second.

Hence, the time required for the rock to reach the ground is 1.11 second.

Learn more about acceleration here:

brainly.com/question/12550364

#SPJ1

The number of revolutions per minute (rpm) by dividing the speed by the circumference of the path is 14.89 rpm.

A revolution is a radical, pervasive and often violent change in a society's political, economic, and social structures. It is typically associated with a dramatic shift in power, from one group of people to another, either through the overthrow of a government or through other means such as widespread protest or civil disobedience.

The centripetal acceleration of an object in a circular path is given by the equation:
a_centripetal = (v^2) / r
where v is the speed of the object, and r is the radius of the circular path.
We know the radius of the path is 5.00 m and the centripetal acceleration should be 1.90 times that due to gravity. The acceleration due to gravity is 9.8 m/s^2. Therefore, the centripetal acceleration should be:
a_centripetal = 1.90 * 9.8 = 18.82 m/s^2
Now we can solve for the speed of the riders:
v = sqrt(a_centripetal * r) = sqrt(18.82 * 5.00) = 12.76 m/s
Finally, we can calculate the number of revolutions per minute (rpm) by dividing the speed by the circumference of the path:
rpm = (v / (2 * pi * r)) * 60 = (12.76 / (2 * pi * 5.00)) * 60 = 14.89 rpm.

To learn more about revolutions
https://brainly.com/question/30295580
#SPJ4

Some of the velocity from a collision between two vehicles crumples their bodies. A purposeful loss of kinetic energy occurs.

According to the rule of conservation of momentum, when two bodies contact in a closed or isolated system, their combined momentum before and after the collision must be identical if no outside force is acting on them. In other words, the system momentum is unchanged.

Momentum is defined as p = mv (in kg/s).

Where V is a body's speed, m = the body's mass, In order to maintain momentum

mv = unchanging

This is,

m1v1 = m2v2

To know more about velocity

https://brainly.com/question/2451490

#SPJ4

The highest frequency audible is the 24th harmonic. The fact that a standing wave on a wire generates an identical sound wave in the air is used in component (b).

To learn more about frequency refer to:

https://brainly.com/question/254161

#SPJ4

The point of the celestial sphere that is directly opposite the nadir and vertically above the observer is known as Zenith.

Perseus, auriga, taurus, gemini are zenith at sunset tonight. Stellarium is a open software that shows real time 3d sky images. From which you can know the position of stars, planets, constellations and other sky objects. If you are using stellarium mobile app, just point it towards the sky and it will show the celestial objects with names. The rising constellations rotate based on our Earth and where it is as it travels through space. It can be predicted through stellarium.  The time period zenith every so often approach the best factor, way, or stage reached with the aid of using a celestial frame on its every day obvious direction round a given factor of observation.

To learn more about constellations check the link below:
https://brainly.com/question/667281

#SPJ4

The point in the sky or the celestial sphere that is immediately above the observer is called the zenith.

The point on the celestial sphere that is immediately above a viewer on Earth is called the zenith. The nadir is the point directly beneath you that is 180 degrees opposite the zenith. To see your sky, drag the "Markings" pane to the side. You can now figure out the limits of the constellations.

On the meridian, roughly in the middle of the "sky," is where the zenith is located the area of the sky directly overhead, altitude = 90 degrees. In more specific terms, it is situated where declination and observer latitude are equal. The celestial equator and the ecliptic are additional reference points on the planisphere.

To learn more about Zenith :

https://brainly.com/question/29382102

#SPJ4

The matte with is silver should be metallic, so it reflects light at all wavelengths, so that the infrared light returns to the body and decreases the radiation radiation emitted, thus keeping it warmer.

What is meant by radiation?

To learn more about radiation refer to

https://brainly.com/question/24469662

#SPJ4

The velocity of an object experiencing an acceleration of 24m/s while traveling in a circle of radius 6.0m is 12m/s.

The required details for velocity in given paragraph

a = v²/r

Given a = 24m/s²; radius = 6m

24 = v²/6

Cross multiplying will give;

v² = 24×6

v² = 144

v =√144

v = 12m/s

The velocity of the object is 12m/s

How does the acceleration and radius of the circle relate to the object's velocity?

The acceleration of an object traveling in a circle is known as centripetal acceleration and is caused by the force of the object's velocity acting towards the center of the circle. The acceleration is directly proportional to the radius of the circle and the square of the velocity of the object. The equation for centripetal acceleration is a = v^2 / r, where a is the acceleration, v is the velocity, and r is the radius. So the bigger the radius of the circle, the lesser the object's velocity needs to be in order to maintain the same acceleration and vice versa.

The object's velocity and the radius of the circle are inversely proportional to each other.

To know more about Acceleration visit:

brainly.com/question/12550364

#SPJ4

The energy that is transferred as heat if the process is adiabatic is 0J and the work is done on or by the gas is 344J.

Given the internal energy of a gas decreases by (ΔU) = 344J

In an adiabatic process, an ideal gas' internal energy reduces by an amount equal to the work the system performs.

ΔU = work done + heat exchange

There is no heat exchange in an adiabatic process according to first law of thermodynamics.

The gas is doing work since the process is adiabatic and the amount of energy transferred as heat will be Q= 0J. If there is no heat exchange during the operation, a change in internal energy equals work done.

Then the work done by the gas is (W) = 344J

To learn more about internal energy click here https://brainly.com/question/11278589

#SPJ4

The speed of the roller coaster at point E is 40 m/s.

The speed of the roller coaster at point F is 49 m/s.

The speed of the roller coaster at point E is calculated by applying the following formula as shown below.

v = √ ( 2gΔh )

where;

At point E, the change in height of the coaster, Δh  = 120 m - 40 m = 80 m

v = √ ( 2gΔh )

v = √ ( 2 x 10 x 80 )

v = 40 m/s

At point F, the change in height of the coaster, Δh  = 120 m - 0 m = 120 m

v = √ ( 2gΔh )

v = √ ( 2 x 10 x 120 )

V = 49 m/s

Learn more about speed of coaster here: https://brainly.com/question/22256474

#SPJ1

A metal ball bearing that has a 41.3 mm circumference weights 8.77 g. the metal has a density of 7.816 g/cm3. The mass of a material per unit of volume is its density.

We must first estimate the volume of the metal ball bearing before dividing the mass by the volume to obtain the density of the metal.

First  calculate the radius,

C = 2πr = 41.3mm = 4.13cm

here, we can find the radius,

r = c/2π = 4.13/2π = 0.65cm

to find the volume,

V = 4/3πr³

V = 4/3 π X 0.65³

V =  1.14cm³

now, to calculate density,

m = 8.77g

d = m/v

d = 8.77/1.14

d = 7.6 g/cm³

Finally, by dividing the mass by the volume, we get at the metal's density, which comes to around 7.6 g/cm3.

learn more about density  here:

https://brainly.com/question/29775886

#SPJ4

The weight of a bear on earth that has a mass of 550 kg is found to be 5390 N.

A mass may be characterized as a type of dimensionless quantity that significantly represents the amount of matter in a particle or object. The standard unit of mass in the International System (SI) is the kilogram (kg).

According to the question,

The mass of a bear = 550 kg.

We have to calculate its weight,

The formula for calculating weight is as follows:

                    = 550 × 9.8 = 5390 N.

Therefore, the weight of a bear on earth that has a mass of 550 kg is found to be 5390 N.

To learn more about Mass, refer to the link:

https://brainly.com/question/19385703

#SPJ4

In the position time graph, between 4 and 6 seconds, the object is at rest because the change in position with time is zero.

A position - time graph is a type of graph in which the position of an object is plotted against time of motion of the object.

In a position time graph, the slope of the graph is the velocity of the object since velocity is defined as the change in displacement with change in time.

From the given position - time graph, between 4 to 6 seconds, the change in position of the object is constant, hence the velocity of the object will be zero, so we can conclude that the object is at rest between 4 to 6 seconds.

Learn more about position - time graph here: https://brainly.com/question/25225415

#SPJ1

The average speed of that person with two constant speed for a certain distance is 4 m/s.

Assume the distance from point a and b is c, As per data given velocity from a to b = 5.10 m/sec. So,

time a to b = c : 5.10.

Since the constant speed is 3.3. then

time b to a = c : 3.30

The we can determine the average speed as follow:

Total distance = c + c = 2c

Total time = time a to b + time b to a

Total time = c : 5.10 + c : 3.30

Total time = 0.196c + 0.303c

Total time = 0.499c

Average speed = total distance : total time

Average speed =  2c : 0.499c

Average speed = 4.00801603206

Let round the result, so the average speed = 4 m/s

Learn more about average speed here

https://brainly.com/question/14635061

#SPJ4

The ball should spin with the speed of 28.8 rpm in order to have an angular momentum of 0.22 kgm2/s .

Given,

mass = 6 kg and diameter = 27 cm

radius = 27/2 = 13.5

angular momentum = L = 0.22kgm^2/sec

we know that,

angular momentum is L= I*w,

where,  I  = moment of inertia          and

            w = angular frequency.

The moment of inertia of a spherical shell is 2/3*M*R^2.

Where , R = radius  and  M= mass

therefore, I = (2/3)(6kg)*(0.135^2).

                  = 0.0729 kg.m^2

solve for speed w,

        L = I x w

       0.22 =  0.0729 x w

therefore, speed = 3.014 m/sec.

        3.014 m/s = 3.014 x 60 / 2π

                         = 28.8 rpm

Learn more about the  angular momentum here:

https://brainly.com/question/29897173

#SPJ4

The force between the spheres would be an electrostatic repulsion force since the spheres have the same charge after they are touched.

Coulomb's Law is a fundamental principle in physics that describes the electric force between two charges. It states that the force between two-point charges is proportional to the product of the charges and inversely proportional to the square of the distance between the charges. Mathematically, Coulomb's Law is represented as F = kq1q2/r², where F is the force between the charges, k is the Coulomb constant, q1 and q2 are the charges, and r is the distance between the charges. The direction of the force is along the line connecting the two charges and is attractive if the charges are opposite in sign and repulsive if the charges are of the same sign.

The strength of the force would depend on the magnitude of the charge on each sphere and the distance between them according to Coulomb's Law, which states that the force between two-point charges is given by: F = kq1q2/r², where k is the Coulomb constant, q1 and q2 are the charges of the two spheres, and the distance between the spheres center is r.

To know more about force, visit:

https://brainly.com/question/13191643

#SPJ4

After the original electrodes 0.8nC are expanded until they are 20 cm in diameter.

What is meant by diameter?

To learn more about diameter refer to

https://brainly.com/question/23220731

#SPJ4