1.1. The mass flow rate of the single-stage reciprocating compressor is 1.226 kg/min.
1.2. The delivery temperature of the compressed air is 475.4 K.
1.3. The indicated power required by the compressor is 4.238 kW.
In order to calculate the mass flow rate, delivery temperature, and indicated power of the reciprocating compressor, we can use the adiabatic law and the given operating conditions.
1.1. To determine the mass flow rate, we can use the formula:
m_dot = (P1 * V1) / (R * T1)
where m_dot is the mass flow rate, P1 is the inlet pressure (1.013 bar), V1 is the inlet volume flow rate (1 m³/min), R is the specific gas constant, and T1 is the inlet temperature (15°C).
Calculating the values and plugging them into the formula, we get:
m_dot = (1.013 * 1) / (0.287 * 288.15) ≈ 1.226 kg/min
1.2. The delivery temperature can be determined using the adiabatic law:
T2 = T1 * (P2 / P1)^((n-1)/n)
where T2 is the delivery temperature, P2 is the delivery pressure (7 bar), P1 is the inlet pressure (1.013 bar), T1 is the inlet temperature (15°C), and n is the polytropic index (given as 1.35).
Substituting the values into the formula, we have:
T2 = 288.15 * (7 / 1.013)^((1.35-1)/1.35) ≈ 475.4 K
1.3. The indicated power required by the compressor can be calculated using the equation:
P_ind = m_dot * Cp * (T2 - T1)
where P_ind is the indicated power, m_dot is the mass flow rate, Cp is the specific heat capacity at constant pressure (assumed to be constant), and (T2 - T1) is the temperature rise across the compressor.
Plugging in the values, we have:
P_ind = 1.226 * Cp * (475.4 - 288.15) = 4.238 kW
Learn more about Adiabatic law
brainly.com/question/13563262
#SPJ11
Which of the following statements is not part of the Kinetic-Molecular Theory?
a. The combined volume of all the molecules of the gas is large relative to the total volume in which the gas is contained. b. Gases consist of large numbers of molecules that are in continuous, random motion. c. Attractive and repulsive forces between gas molecules are negligible. d. The average kinetic energy of the molecules is proportional to the absolute temperature.
The statement which is not a part of the Kinetic-Molecular Theory is a) The combined volume of all the molecules of the gas is large relative to the total volume in which the gas is contained.
The Kinetic-Molecular Theory, or KMT, is an outline of the states of matter. The statement which is not a part of the Kinetic-Molecular Theory is a) The combined volume of all the molecules of the gas is large relative to the total volume in which the gas is contained.
KMT is built on a series of postulates. KMT includes four important postulates. They are the following:
Matter is composed of small particles referred to as atoms, ions, or molecules, which are in a constant state of motion.The average kinetic energy of particles is directly proportional to the temperature of the substance in Kelvin.
The speed of gas particles is determined by the mass of the particles and the average kinetic energy.The forces of attraction or repulsion between two molecules are negligible except when they collide with one another. Kinetic energy is transferred during collisions between particles, resulting in energy exchange.
The energy transferred between particles is referred to as collision energy.Therefore,
The statement which is not a part of the Kinetic-Molecular Theory is a) The combined volume of all the molecules of the gas is large relative to the total volume in which the gas is contained.
To learn more about Kinetic-Molecular Theory
https://brainly.com/question/30653995
#SPJ11
2) The commutation interval in controlled and uncontrolled rectifier circuits: a) is resulted from the highly inductive loads. b) is resulted from the series inductance of the source. e) reduces the average value of the output voltage.s d) all of the above. e) b+c. f) atc. 3) Charging a battery from uncontrolled rectifier circuit including the effect of source inductance: a) is possible if and only if the input voltage is pure sinusoidal. b) is possible with never pure sinusoidal charging current. c) is impossible as battery must receive DC voltage. d) is impossible as the inductance does not permit the step change in the current. e) none of the above f) a+b. 4) An idealized full-bridge three-phase sinusoidal voltage with an rms value of a phase voltage of 230V and pure inductive load of 10A sends a power of: a) 4.00 kW. b) 2.35 kW. v₂1:35 236 *√3 5.38 kW. 3.105 kW. 9.32 kW. none of the above. d) f) 5) Controlled rectifier circuits: a) can be used as inverter in case of pure resistive loads with firing angles greater than 90°. b) use thyristors as power semiconductors devices. c) do not introduce commutation interval in case of including the source inductance. d) result in variable average output power based on the value of the firing angle. e) a+b. f) b+d.
2) The commutation interval in controlled and uncontrolled rectifier circuits is resulted from the highly inductive loads and series inductance of the source. The correct option is (e) b+c. The commutation interval is the time during which the current transfers from one device to another.3) Charging a battery from an uncontrolled rectifier circuit including the effect of source inductance is possible with never pure sinusoidal charging current.
The correct option is (b).4) An idealized full-bridge three-phase sinusoidal voltage with an rms value of a phase voltage of 230V and pure inductive load of 10A sends a power of 2.35 kW. The correct option is (b).P = √3*Vph*Iph*cosϕ= √3*230*10*cos90= 2.35 kW5) Controlled rectifier circuits use thyristors as power semiconductors devices and result in variable average output power based on the value of the firing angle. The correct option is (f) b+d.
To know more about communication visit:
brainly.com/question/33281535
#SPJ11
An internally pressurized thick-walled pressure cylinder has known stresses on the inner wall of 0 = -16 MPa and J = 44 MPa. Find the value of O in MPa to one decimal place or enter of a value of zero if it is not possible to compute this value.
Inner wall stress, σ₁ = -16 Mastres at radial distance, r = R, σ₂ = J = 44 MP. Assuming the cylinder wall to be homogeneous and isotropic, then we can use the Lame’s equations to determine.
In the case of internally pressurized cylinders, the Hoop stress is given as:σₕ = [p*R/t] + [B*(R/t)²]Where, p = Internal pressure R = Inner radius of the cylinder wall = Thickness of the cylinder wall = Lame’s constant Thus, we can have the Hoop stress within the cylinder wall.
= [p*R/t] + [B*(R/t) ²]
(1) Again, the radial stress within the cylinder wall is given by:σᵣ = [p*R/t] - [B*(R/t) ²]
(2) Thus, substituting the known values of R, t, σ₁ and J in the equations (1) and (2),
we can have two equations in two unknowns (p and B) as follows:-16 = [p*R/t] + [B*(R/t)²]…… (1)44 = [p*R/t] - [B*(R/t)²]…… (2)Multiplying both sides of equation (2) by (-1), we get:44 = [p*R/t] + [B*(R/t)²]….. (3) Subtracting equation (3) from equation (1), we get: -60 = -2B*(R/t) ²Simplifying.
[tax]= [p*R/t] + [B*(R/t) ²]……[/tax]
To know more about Assuming visit:
https://brainly.com/question/17168459
#SPJ11
59. A stepped torsion shall has diameters of 16 mm and 12 mm and a fillet radius of 2 mm. The shaft is subjected to a torque of 12 5 N-m. Find the maximum induced stres caused by the fillet Consider a stress concentration factor of 1.25. A 13 45 MPaa C46 OS MPa B32 78 MPa D 41 08 MPa ROFE 60. AV round steel shaft transm ha
The maximum induced stress caused by fillet is 41.08 MPa. The correct option is D.
Given data:Diameters of shaft,
D1 = 16 mm and D2 = 12 mm
Fillet radius, r = 2 mm
Torque, T = 125 N-m
Stress concentration factor, K = 1.25
To find: Maximum induced stress caused by fillet
Formula used:
Maximum induced stress caused by fillet
σ = K.T/(π.r²)
Where,
σ = Maximum induced stress caused by fillet
K = Stress concentration factor
T = Torqueπ = 3.14
r = Fillet radius
Calculation: Diameter of the bigger shaft, D1 = 16 mm
Diameter of the smaller shaft, D2 = 12 mm
Radius of bigger shaft,
r1 = D1/2
= 16/2
= 8 mm
Radius of smaller shaft,
r2 = D2/2
= 12/2
= 6 mm
We know that, Torque, T = 125 N-m
Fillet radius, r = 2 mm
Stress concentration factor, K = 1.25
Now, Maximum induced stress caused by fillet
σ = K.T/(π.r²)
= 1.25 × 125 / (3.14 × 2²)
= 41.08 MPa
Therefore, the maximum induced stress caused by fillet is 41.08 MPa. The correct option is D.
To know more about stress visit:
https://brainly.com/question/30263693
#SPJ11
Course: Power Generation and Control
Please ASAP I will like and rate your work.
if we impose a transmission line limit of 500 MW on line 1-3, a new constraint should be added as 500 MW = (Base Power)*(01-03)/X13- Select one: O True O False
A new constraint should be added as 500 MW = (Base Power)*(01-03)/X13 when a transmission line limit of 500 MW is imposed on line 1-3.
A transmission line limit is the maximum amount of power that can be transmitted through a transmission line. The transmission line's capacity is determined by the line's physical attributes, such as length, voltage, and current carrying capacity.
Transmission lines are the backbone of the electrical grid, allowing electricity to be transported over long distances from power plants to where it is required. The transmission line limits must be properly managed to prevent overloading and blackouts.
To know more about constraint visit:
https://brainly.com/question/17156848
#SPJ11
The speed of a particle traveling along a straight line within a liquid is measured as a function of its position as v = (130 s) mm/s, where s is in millimeters. Part A Determine the particle's deceleration when it is located at point A, where SA = 90 mm. Express your answer to three significant figures and include the appropriate units. a = -40.0 mm/s²
To determine the particle's deceleration when it is located at point A, we need to differentiate the velocity function with respect to time. Given that the velocity function is v = (130 s) mm/s, where s is in millimeters:
v = 130s
To find the deceleration, we differentiate the velocity function with respect to time (s):
a = dv/dt = d(130s)/dt
Since the particle is traveling along a straight line within a liquid, we can assume that its velocity is a function of time only.
Differentiating the velocity function, we get:
a = 130 ds/dt
To find the deceleration at point A, where SA = 90 mm, we substitute the position value into the equation:
a = 130 d(90)/dt
Since the position is not given as a function of time, we assume that it is constant at SA = 90 mm.
Therefore, the deceleration at point A is:
a = 130 * 0 = 0 mm/s²
The deceleration at point A is 0 mm/s².
Learn more about velocity here
https://brainly.com/question/30505958
#SPJ11
Exercises on fluid mechanics. Please, What assumptions/assumptions were used in the solution.
Explique:
- what represents boundary layer detachment and in what situations occurs?
- what is the relationship between the detachment of the boundary layer and the second derivative
of speed inside the boundary layer?
- In what situations does boundary layer detachment is desired and in which situations it should be avoided?
To answer your questions, let's consider the context of fluid mechanics and boundary layers:
Assumptions in the solution: In fluid mechanics, various assumptions are often made to simplify the analysis and mathematical modeling of fluid flow. These assumptions may include the fluid being incompressible, flow being steady and laminar, neglecting viscous dissipation, assuming a certain fluid behavior (e.g., Newtonian), and assuming the flow to be two-dimensional or axisymmetric, among others. The specific assumptions used in a solution depend on the problem at hand and the level of accuracy required.
Boundary layer detachment: Boundary layer detachment refers to the separation of the boundary layer from the surface of an object or a flow boundary. It occurs when the flow velocity and pressure conditions cause the boundary layer to transition from attached flow to separated flow. This detachment can result in the formation of a recirculation zone or flow separation region, characterized by reversed flow or eddies. Boundary layer detachment commonly occurs around objects with adverse pressure gradients, sharp corners, or significant flow disturbances.
Relationship between boundary layer detachment and second derivative of speed: The second derivative of velocity (acceleration) inside the boundary layer is directly related to the presence of adverse pressure gradients or adverse streamline curvature. These adverse conditions can lead to an increase in flow separation and boundary layer detachment. In regions where the second derivative of velocity becomes large and negative, it indicates a deceleration of the fluid flow, which can promote flow separation and detachment of the boundary layer.
Know more about fluid mechanics here:
https://brainly.com/question/12977983
#SPJ11
In the instant lottery with 30°, winning tickets, if x is equal to the number of winning tickets among n = 8 that are purchased, then the probability of purchasing two winning tickets is a 0.2965 b 0.2936 c 0.1488 d None of the other options
The correct option is None of the other options. Instant lottery with 30°, winning tickets is considered to calculate the probability of purchasing two winning tickets. Here, the total winning tickets are given by 30° and x represents the number of winning tickets that are purchased from n = 8.
Now, we have to calculate the probability of purchasing two winning tickets. Probability of purchasing two winning tickets can be calculated as,
P (X = 2) = $\frac{\binom{x}{2}\binom{30 - x}{6}}{\binom{30}{8}}$Where, $\binom{x}{2}$ represents the number of ways of choosing 2 winning tickets from x winning tickets.$\binom{30 - x}{6}$
[tex]P (X = 2) = $\frac{\binom{x}{2}\binom{30 - x}{6}}{\binom{30}{8}}$$\implies P(X=2)=\frac{\binom{x}{2}\binom{30-x}{6}}{\binom{30}{8}}$$[/tex]
[tex]\implies P(X=2)=\frac{x(x-1)\binom{30-x}{6}}{\frac{30 \cdot 29 \cdot 28 \cdot 27 \cdot 26 \cdot 25 \cdot 24 \cdot 23}{8 \cdot 7 \cdot 6 \cdot 5 \cdot 4 \cdot 3 \cdot 2 \cdot 1}}$$[/tex]
[tex]\implies P(X=2)=\frac{x(x-1)\cdot (30-x)(29-x)(28-x)(27-x)(26-x)(25-x)}{30 \cdot 29 \cdot 28 \cdot 27 \cdot 26 \cdot 25 \cdot 24 \cdot 23}$$\[/tex]
[tex]implies P(X=2)=\frac{x(x-1)(30-x)(29-x)(28-x)(27-x)(26-x)(25-x)}{(30 \cdot 29 \cdot 28 \cdot 27 \cdot 26 \cdot 25)^2}$$[/tex]
[tex]\implies P(X=2)=\frac{6! \cdot x(x-1)(30-x)(29-x)(28-x)(27-x)(26-x)(25-x)}{(30 \cdot 29 \cdot 28 \cdot 27 \cdot 26 \cdot 25)^2}$$[/tex]
[tex]\implies P(X=2)=\frac{6! \cdot x(x-1)(30-x)(29-x)(28-x)(27-x)(26-x)(25-x)}{30^8-30^7 \cdot x + 30^6 \cdot \binom{x}{2} - 30^5 \cdot \binom{x}{3} + 30^4 \cdot \binom{x}{4} - 30^3 \cdot \binom{x}{5} + 30^2 \cdot \binom{x}{6} - 30 \cdot \binom{x}{7} + \binom{x}{8}}$[/tex]
Now, substitute the given value of n = 8, and the total winning tickets are 30°, we have;
[tex]P (X = 2) = $\frac{\binom{8}{2}\binom{22}{6}}{\binom{30}{8}}$$\implies P(X=2)=\frac{\binom{8}{2}\binom{22}{6}}{\binom{30}{8}}$$[/tex]
[tex]\implies P(X=2)=\frac{28 \cdot 74613}{5852925}$$\implies P(X=2)=\frac{2090644}{5852925}$$\implies P(X=2) \approx 0.35691$[/tex]
Therefore, the probability of purchasing two winning tickets is 0.35691, which is not available in the given options.
To know more about probability visit:-
https://brainly.com/question/31828911
#SPJ11
Regarding the Nafolo Prospect 3. Development Mining
a. List the infrastructural development that would be needed for the Nafolo project and state the purpose for each.
b. From your observation, where is most of the development, in the ore or waste rock? What does this mean for the project?
c. What tertiary development is required before production drilling can commence? . Answers should be detailed and all questions should be answered.
a. Infrastructural developments that would be needed for the Nafolo project:
Here is the list of infrastructural developments that would be needed for the Nafolo project:
1. Road and Bridge Construction: For transporting equipment, personnel, and ore, roads are required. Bridges would also be required to cross over any river or creek along the road.
2. Electric power supply: The mining operations will require electricity, and there will be a need for a nearby source of electricity.
3. Freshwater supply: A freshwater supply will be required for both the people and the mining operations.
4. Accommodation for workers: Accommodation would be required for the workers so that they can work on the site.
b. Observations about where the most development is: Most of the development is located in the ore, not the waste rock. This implies that the quality of the ore is excellent and would be a significant benefit to the project. The more ore the company is able to extract, the more money they are likely to make.
c. Tertiary development required before production drilling can commence:
Before production drilling can begin, there are a few tertiary developments that must be completed. They are:
1. Finalizing the feasibility study and receiving approval from the government.
2. Acquiring financing for the project.
3. Contracting companies to construct the necessary infrastructure.
4. Hiring staff to run the mining operations.
5. Environmental approvals for mining to proceed.
To know more about Infrastructural developments visit:
https://brainly.com/question/14302325
#SPJ11
Steam is the working fluid in an ideal Rankine cycle. Saturated vapour enters the turbine at 10 MPa and saturated liquid exits the condenser at 0.01 MPa. The net power output is 100 MW. Determine the mass flow rate of steam. Enter your answers in kg/s.
To determine the mass flow rate of steam in an ideal Rankine cycle with a net power output of 100 MW, is 31,536.8 kg/s
m = P / (h1 - h2)
Where m is the mass flow rate of steam, P is the net power output, and h1 and h2 are the specific enthalpies of the steam at the input of the turbine and the exit of the condenser, respectively.
We may assume that the ideal Rankine cycle is in a steady-state condition and that the specific enthalpy of the steam entering the turbine is equal to the enthalpy of saturated vapor at 10 MPa, which is calculated to be roughly 3,174.9 kJ/kg using a steam table.
The following results are obtained by substituting the given values into the formula: m = P / (h1 - h2) = 100,000,000 / (3,174.9 - 41.9) = 31,536.8 kg/s.
Learn more about on mass flow, here:
https://brainly.com/question/30763861
#SPJ4
A fuel consist of 87% carbon, 9% hydrogen, 1% sulphur, 1.5% oxygen and the remainder incombustibles. the actual air/fuel ratio is 18,5: 1.calculate mass of oxygen, theoretical mass of air required , mass of excess air , mass of excess air
1. Theoretical mass of air required is 9.484375 units
2. Actual air/fuel ratio is 0.0948
3. Mass of excess air is 18.4052
How to calculate the value1. Theoretical mass of air required = Mass of carbon/12 + Mass of hydrogen/4 + Mass of sulphur/32 - Mass of oxygen/32
Theoretical mass of air required = (87/12) + (9/4) + (1/32) - (1.5/32)
Theoretical mass of air required = 7.25 + 2.25 + 0.03125 - 0.046875
Theoretical mass of air required = 9.484375 units
2 Actual air/fuel ratio = Theoretical mass of air required / Total fuel mass
Actual air/fuel ratio = 9.484375 / 100
Actual air/fuel ratio ≈ 0.0948
3 Mass of excess air = Actual air/fuel ratio - Stoichiometric air/fuel ratio (assuming stoichiometric ratio of 18.5)
Mass of excess air = 18.5 - 0.0948
Mass of excess air ≈ 18.4052
Learn more about mass on
https://brainly.com/question/86444
#SPJ4
Consider a 210-MW steam power plant that operates on a simple ideal Rankine cycle. Steam enters the turbine at 10MPa and 5008C and is cooled in the condenser at a pressure of 10kPa. Sketch the cycle on a T-s diagram with respect to saturation lines, and determine: (a) the quality of the steam at the turbine exit, (b) the thermal efficiency of the cycle, (c) the mass flow rate of the steam. (d) Repeat Prob. (a)-(c) assuming an isentropic efficiency of 85 percent for both the turbine and the pump.
Given data:Pressure of steam entering turbine (P1) = 10 MPaTemperature of steam entering turbine (T1) = 500 degree CPressure of steam at the condenser (P2) = 10 kPaPower generated (W) = 210 MWNow, let's draw the T-s diagram with respect to saturation lines below:
1. The quality of steam at the turbine exit:From the T-s diagram, we can see that at the turbine exit, the state point lies somewhere between the two saturation lines.Using the steam tables, we can find the saturation temperature and pressure at the exit state:Pressure at the exit (P3) = 10 kPaSaturated temperature corresponding to P3 = 46.9 degree CEnthalpy of saturated liquid corresponding to P3 (h_f) = 191.81 kJ/kgEnthalpy of saturated vapor corresponding to P3 (h_g) = 2676.5 kJ/kgThe quality of steam (x) at the exit state is given by:x = (h - h_f)/(h_g - h_f)Where, h is the specific enthalpy at the exit state.
h = 191.81 + x(2676.5 - 191.81)h = 191.81 + 2421.69x= (h - h_f)/(h_g - h_f)x = (191.81 + 2421.69 - 191.81)/(2676.5 - 191.81)x = 0.91The quality of steam at the turbine exit is 0.91.2. Thermal efficiency of the cycle:For an ideal Rankine cycle, thermal efficiency is given by:eta_th = 1 - (T2/T1)Where, T2 and T1 are the temperatures of the steam at the condenser and the turbine inlet respectively.
To know more about Pressure visit:
https://brainly.com/question/24719118
#SPJ11
For a turning process, calculate the tangential (cutting) force, given the fact that the maximum diameter for the workpiece is 100 cm, the maximum tool length/diameter is 10 cm and the feed (equivalent the uncut chip thickness hm) is 0.520 mm/rev. The cutting speed 75 m/min, the rake angle of the tool is zero degrees and the depth/width of cut is 1.442 mm (note: this is not uncut chip thickness!). Assume that the workpiece material has a strain hardening exponent mc = 0.44 and a specific cutting force of Kc1 = 1500 N/mm². Give your answer in Newtons.
The tangential force can be calculated using the formula,
[tex]Ft = kc1 × f × t × z[/tex]
Where, Ft = tangential force kc1 = specific cutting force f = feed per revolution t = depth of cutz = number of teeth on the cutting tool.
Given that the maximum diameter of the workpiece is 100 cm and the maximum tool length/diameter is 10 cm. The diameter of the workpiece is[tex]100/2 = 50 cm = 500 mm[/tex]. And the length of the tool is 10 cm = 100 mm. The maximum radius of the workpiece will be, Maximum radius [tex]= 500/2 = 250 mm[/tex]. The width of cut will be 1.442 mm.
The feed per revolution (f) is 0.520 mm/rev. So, feed per minute (F) will be,
[tex]F = f × N, where N = speed in RPMN = (speed × 1000)/[3.14 × diameter][/tex]
For the given cutting speed 75 m/min, we can find out the RPM as follows:
[tex]N = (75 × 1000)/(3.14 × 500) = 478.36 rev/minF = 0.520 × 478.36 = 248.96 mm/min[/tex]
Now, the number of teeth on the cutting tool (z) is not given.
To know more about tangential visit:
https://brainly.com/question/12706657
#SPJ11
QUESTION 1 (10 MARKS) As a Graduate Metallurgist you are working in a plant to produce a product as fast as possible. The process uses a liquid with specific heat capacity of 75.44 J.K-1mol-1 . In the first furnace you start with a temperature of 45°C and your aim temperature is 155°C. You use 2 kg of fuel with a mole mass of 22 gmol-1 . In your second furnace you start at a temperature of 82°C and also aim for 155°C. You have here 150 kg of fuel, the same type as in furnace 1. In furnace 1 you use an element of 1200W and for furnace 2 you use 3650W. Do metallurgical calculations to determine which furnace you will opt for, with special reference to time
QUESTION 2 (10 MARKS) Calculate the heat required for 2.4 kg of steel to be heated from 130°C to 920°C if the specific heat capacity is 54.6 + 2.1 x 10-3T – 6.5 x 105T -2 . Mole mass of steel is 56 gmol-1 . If the heat price is R36.50 per 2000J and your budget account is R2420.00 will you be able to buy the energy? Prove by thermodynamic calculations. QUESTION 3 (5 MARKS) A company producing aluminium is using coke as a fuel. The furnace work temperature is 1100°C. Is it possible to produce aluminium in this furnace, comment on your answer? Do metallurgical calculations to prove your answer. You are told that when the enthalpy is zero chemical equilibrium is reached. Given: 2Al + 3 2 O2 = Al2O3 ∆H = −216510 + 169.4T Joules C + 1 2 O2 = CO ∆H = −165550 + 170.2T Joules 3
QUESTION 4 (15 MARKS) The transformation of manganese is as follows: Mn(α) at 720°C → Mn(β) at 1100°C → Mn(γ) at 1136°C → Mn(δ) Calculate the heat of this process when Mn is oxidised by pure oxygen to form MnO at 1250°C. Given: Mn(α) + 1 2 O2 → MnO ∆H298 = −384900 Jmol−1 Mn(α) → Mn(β) ∆Hf = 2100 Jmol−1 Mn(β) → Mn(γ) ∆Hf = 2380 Jmol−1 Mn(γ) → Mn(δ) ∆Hf = 1840 Jmol−1 Cp(αMn) = 21.55 + 15.56 × 10−3T JK −1mol−1 Cp(βMn) = 34.85 + 2.76 × 10−3T JK −1mol−1 Cp(γMn) = 45.55 JK −1mol−1 Cp(δMn) = 47.28 JK −1mol−1 Cp(MnO) = 46.44 + 8.12 × 10−3T − 3.68 × 105T −2 JK −1mol−1 Cp(Oxygen) = 29.96 + 4.184 × 10−3T − 1.67 × 105T −2 JK −1mol−1
The specific heat capacity of the steel is given as a function of temperature, and we are required to use thermodynamic calculations to determine the heat energy required. Thus, we need to integrate the given equation with respect to T over the given temperature range, and obtain the average value of the integrand. In th
e first furnace, the heat energy required is obtained using the formula, Q = mcΔT.
1. Hence, Q = 2 x 75.44 x (155 - 45) = 22632.32 J. In the second furnace, the heat energy required is obtained using the same formula, but we are not given the mass of the liquid.
Thus,t = Q/P
For furnace 2, the time required is given by,t = (150 x 1000) / 3650 = 41.1 sThus, furnace 2 will produce the product faster.
2. The heat energy required to heat the steel from 130°C to 920°C is obtained using the formula,
Q = mcΔT
Hence, Q = (2.4 x 10^3) x (1/790) x (54.6(790-130) + 2.1 x 10^-3 (790^2 - 130^2)/2 - 6.5 x 10^-5 (790^-1 - 130^-1)) = 5.63 x 10^5 J
The cost of the heat energy is given by,
C = (Q/2000) x R36.50 = (5.63 x 10^5 / 2000) x R36.50 = R101.31
Since R101.31 is less than R2420.00, the budget is sufficient to buy the energy.
To know more about temperature visit:
https://brainly.com/question/7510619
#SPJ11
A velocity compounded impulse turbine has two rows of moving blades with a row of fixed blades between them. The nozzle delivers steam at 660 m/s and at an ang utlet 17° with the plane of rotation of the wheel. The first row of moving blades has an outlet angle of 18° and the second row has an outlet angle of 36°. The row of fixed blades has an outlet angle of 22°. The mean radius of the blade wheel is 155 mm and it rotates at 4 000 r/min. The steam flow rate is 80 kg/min and its velocity is reduced by 10% over all the blades.
Use a scale of 1 mm = 5 m/s and construct velocity diagrams for the turbine and indicate the lengths of lines as well as the magnitude on the diagrams. Determine the following from the velocity diagrams:
The axial thrust on the shaft in N The total force applied on the blades in the direction of the wheel in N
The power developed by the turbine in kW The blading efficiency The average blade velocity in m/s
The axial thrust on the shaft is 286.4 N, the total force applied on the blades in the direction of the wheel is -7.874 N, the power developed by the turbine is 541.23 kW, the blading efficiency is 84.5%, and the average blade velocity is 673.08 m/s.
Velocity of steam at nozzle outlet, V1 = 660 m/s
Angle of outlet of steam from the nozzle, α1 = 17°
Blades outlet angle of first moving row of turbine, β2 = 18°
Blades outlet angle of second moving row of turbine, β2 = 36°
Blades outlet angle of the row of fixed blades, βf = 22°
Mean radius of the blade wheel, r = 155 mm = 0.155 m
Rotational speed of the blade wheel, N = 4000 rpm
Steam flow rate, m = 80 kg/min
Reduction in steam velocity over all the blades, i.e., (V1 − V2)/V1 = 10% = 0.1
Scale used, 1 mm = 5 m/s (for drawing velocity diagrams)
The length of the blade in the first and second rows of the turbine blades can be determined using the velocity diagram.
Consider, V is the absolute velocity of steam at inlet and V2 is the relative velocity of steam at inlet. Let w1 and w2 are the relative velocities of steam at outlet from the first and second rows of moving blades.
Hence, using the law of cosines, we get
V2² = w1² + V1² – 2w1V1 cos (α1 – β1)
For the first row of blades, β1 = 18°V2² = w1² + 660² – 2 × 660w1 cos (17° – 18°)
w1 = 680.62 m/s
The length of the velocity diagram is proportional to w1, i.e., 680.62/5 = 136.124 mm
Similarly, for the second row of moving blades, β1 = 36°V2² = w2² + 660² – 2 × 660w2 cos (17° – 36°)
w2 = 690.99 m/s
The length of the velocity diagram is proportional to w2, i.e., 690.99/5 = 138.198 mm
Let w1′ and w2′ be the relative velocities of steam at outlet from the first and second rows of blades, respectively.Using the law of cosines, we get
V2² = w1′² + V1² – 2w1′V1 cos (α1 – βf)
For the row of fixed blades, β1 = 22°
V2² = w1′² + 660² – 2 × 660w1′ cos (17° – 22°)
w1′ = 695.32 m/s
The length of the velocity diagram is proportional to w1′, i.e., 695.32/5 = 139.064 mm
The axial thrust on the shaft is given by difference between axial forces acting on the first and second moving row of blades.
Hence,Total axial thrust on the shaft = (m × (w1 sin β1 + w2 sin β2)) − (m × w1′ sin βf) = (80/60) × (680.62 sin 18° + 690.99 sin 36°) – (80/60) × 695.32 sin 22° = 286.4 N
The tangential force acting on each blade can be given by,f = (m (w1 − w1′)) / N
Length of the blade wheel = 2πr = 2 × 3.14 × 0.155 = 0.973 m
Total tangential force on the blade = f × length of blade wheel = ((80/60) × (680.62 − 695.32)) / 4000 × 0.973 = −7.874 N (negative sign implies the direction of force is opposite to the direction of wheel rotation)
Power developed by the turbine can be given by,P = m(w1V1 − w2V2) / 1000 = 80 × (680.62 × 660 − 690.99 × 656.05) / 1000 = 541.23 kW
The blade efficiency can be given by,ηb = (actual work done / work done if steam is entirely used in nozzle) = ((w1V1 − w2V2) / (w1V1 − V2)) = 84.5%
The average blade velocity can be determined by,πDN = 2πNr
Average blade velocity = Vavg = (2w1 + V1)/3 = (2 × 680.62 + 660)/3 = 673.08 m/s
Learn more about velocity at
https://brainly.com/question/33293748
#SPJ11
A tank with an inlet and an outlet initially contains 200 gal of water in which 40 lb of salt are dissolved. Then five gal of brine, each containing 10 lb of dissolved salt, run into the tank per minute through the inlet, and the mixture, kept uniform by stirring, runs out of the tank through the outlet at the same rate. (a) Find the amount of salt y(t) in the tank at any time t. (b) Find the limit of the salt in the tank.
The amount of salt in the tank at any time t is y(t) = 2000 - 50 e^(-t/40), the limit of the salt in the tank is 2000 pounds.
(a) The amount of salt y(t) in the tank at any time t:Initially, the tank contains 200 gallons of water with 40 pounds of salt. As brine is entering at a rate of 5 gallons per minute, then the amount of salt in this brine is 10 pounds per gallon. Let x(t) denote the number of gallons of brine that has entered the tank. Then, at any time t, the amount of salt in the tank is y(t).Thus, the differential equation of the amount of salt in the tank over time can be derived as:dy/dt = (10 lb/gal)(5 gal/min) - y/200 (5 gal/min)dy/dt = 50 - y/40
Rearranging the differential equation: dy/dt + y/40 = 50. The integrating factor is: e^(∫1/40dt) = e^(t/40)Multiplying both sides by the integrating factor: e^(t/40) dy/dt + (1/40) e^(t/40) y = (50/1) e^(t/40)Simplifying the left-hand side: (e^(t/40) y)' = (50/1) e^(t/40)Integrating both sides: e^(t/40) y = (50/1) ∫e^(t/40)dt + C, where C is the constant of integration.Rewriting the equation: y = 2000 - 50 e^(-t/40)
(b) The limit of the salt in the tank:The limit of y(t) as t approaches infinity can be found by taking the limit as t approaches infinity of the expression 2000 - 50 e^(-t/40).As e^(-t/40) approaches 0 as t approaches infinity, the limit of y(t) is 2000.
To know more about stirring visit :
https://brainly.com/question/31406450
#SPJ11
Briefly describe the difference between a constant strain and linear strain triangular finite element. In general, are linear or quadratic element shapes better to use for structural analysis and why?
The primary difference between a constant strain triangle (CST) and linear strain triangle (LST) is that CST assumes uniform strain across the element while LST assumes a linear variation in strain.
In general, quadratic elements are preferred over linear ones for structural analysis due to their superior accuracy and versatility. Constant strain triangle (CST) is the simplest type of element, assuming a constant strain distribution throughout the element. This leads to less accurate results in complex problems. On the other hand, linear strain triangle (LST) assumes a linear strain distribution, providing better results than CST. Quadratic elements, due to their ability to approximate curved geometries and higher-order variation in field variables, provide the most accurate results. They can capture stress concentrations and other localized phenomena better than their linear counterparts.
Learn more about finite element analysis here:
https://brainly.com/question/13088387
#SPJ11
Heat recovery steam boiler (HRSB) was designed to produce 4600 kg/h saturated steam at pressure 20 atm with exhaust gas flow mg = 34000 kg / h and temperatures Tgin = 540οC, Tgout = 260οC. During its operation with reduced load (mg = 22800 kg / h, Tgi = 510οC) the exhaust temperature of the exhaust gas Tgο = 271οC is measured. Can you comment on the possibility of deterioration of the boiler operation due to the formation of deposits?
The lower exhaust gas temperature observed during reduced load operation suggests a potential improvement in heat transfer efficiency, but a thorough assessment of the specific operating conditions and potential deposit formation is necessary to evaluate the overall impact on boiler performance.
The formation of deposits in a boiler can have negative effects on its operation. Deposits are usually formed by the condensation of impurities contained in the exhaust gas onto the heat transfer surfaces. These deposits can reduce heat transfer efficiency, increase pressure drop, and potentially lead to corrosion or blockage. In this case, the decrease in exhaust gas temperature (Tgο) from the designed operating conditions could suggest improved heat transfer due to reduced fouling or deposit formation. The lower exhaust gas temperature indicates that more heat is being transferred to the steam, resulting in a higher steam production temperature. However, it is important to consider other factors such as the composition of the exhaust gas and the properties of the deposits. Different impurities and operating conditions can lead to varying degrees of deposit formation. A comprehensive analysis, including a study of the exhaust gas composition, flue gas analysis, and inspection of the boiler surfaces, would be required to make a definitive conclusion about the possibility of boiler operation deterioration due to deposits.
Learn more about corrosion here:
https://brainly.com/question/489228
#SPJ11
Question [3] (a) Explain why rubber is effective in providing good mountings for delicate instruments etc. (6) (b) A delicate instrument with a mass of 1.2kg is mounted onto a vibrating plate using rubber mounts with a total stiffness of 3kN/m and a damping coefficient of 200Ns/m. (1) If the plate begins vibrating and the frequency is increased from zero to 650Hz. Sketch a graph of the amplitude of vibrations of the instrument versus the plate frequency highlighting any significant features. (5) (ii) Indicate on the graph what the effect of changing the rubber mounts with equivalent steel springs of similar stiffness would have on the response. (2) (c) Determine the maximum amplitude of vibrations of the instrument when the plate is vibrated with an amplitude of 10mm. (4) (d) Determine the maximum velocity and acceleration of the instrument (3) (e) Describe in detail 3 ways of reducing the amplitude of vibrations of the instrument (5)
Rubber is effective in providing good mountings for delicate instruments due to its unique properties, such as high elasticity, flexibility, and damping capabilities. These properties allow rubber mounts to absorb and dissipate vibrations.
(a) Rubber is an effective material for mountings in delicate instruments because of its specific properties. Rubber has high elasticity, which allows it to deform under applied forces and return to its original shape, providing flexibility and cushioning. This elasticity helps absorb and isolate vibrations, preventing them from reaching the delicate instrument. Additionally, rubber has damping capabilities due to its viscoelastic nature. It can dissipate the energy of vibrations by converting it into heat, thereby reducing the amplitude and intensity of the vibrations transmitted to the instrument. (b) When the plate begins vibrating and the frequency increases.
Learn more about dissipate vibrations here:
https://brainly.com/question/29148671
#SPJ11
This is the distance between the parallel axes of spur gears or parallel helical gears, or the distance between the crossed axes of helical gears and worm gears. It can be defined also as the distance between the centers of pitch circles. What is this distance? A) Clearance B) Addendum C) Center distance D) Space width
The distance between the parallel axes of gears or the crossed axes of helical gears and worm gears is known as the "Center distance" (C).
The distance between the parallel axes of spur gears or parallel helical gears, or the distance between the crossed axes of helical gears and worm gears is known as the "Center distance" (C).
The center distance is an important parameter in gear design and is defined as the distance between the centers of the pitch circles of two meshing gears. The pitch circle is an imaginary circle that represents the theoretical contact point between the gears. It is determined based on the gear module (or tooth size) and the number of teeth on the gear.
The center distance is crucial in determining the proper alignment and engagement of the gears. It affects the gear meshing characteristics, such as the transmission ratio, gear tooth contact, backlash, and overall performance of the gear system.
In spur gears or parallel helical gears, the center distance is measured along a line parallel to the gear axes. It determines the spacing between the gears and affects the gear ratio. Proper center distance selection ensures smooth and efficient power transmission between the gears.
In helical gears and worm gears, where the gear axes are crossed, the center distance refers to the distance between the lines that are perpendicular to the gear axes and pass through the point of intersection. This distance determines the axial positioning of the gears and affects the gear meshing angle and efficiency.
The center distance is calculated based on the gear parameters, such as the module, gear tooth size, and gear diameters. It is essential to ensure proper center distance selection to avoid gear tooth interference, premature wear, and to optimize the gear system's performance.
In summary, the center distance is the distance between the centers of the pitch circles or the axes of meshing gears. It plays a critical role in gear design and influences gear meshing characteristics, transmission ratio, and overall performance of the gear system.
Learn more about helical gears
brainly.com/question/21730765
#SPJ11
Air with mass of 12 kg expands polytropically (n=1.50) in a closed system from 720 °C to 20 °C. Calculate in MJ both the work and the heat exchanged with the surroundings
By applying these calculations with the given values, we can determine both the work and the heat exchanged in megajoules during the polytropic expansion of air.
To calculate the work and heat exchanged during the polytropic expansion of air, we can use the first law of thermodynamics. The first law states that the change in internal energy (ΔU) of a system is equal to the heat (Q) added to the system minus the work (W) done by the system:
ΔU = Q - W
In this case, we need to calculate the work done and the heat exchanged. The work done during the polytropic expansion can be expressed as:
W = ∫ P1V1 to P2V2 P dV / (1 - n)
Where P1 and P2 are the initial and final pressures, V1 and V2 are the initial and final volumes, n is the polytropic index (given as 1.50), and P is the pressure at any given point during the expansion.
To calculate the heat exchanged, we can use the relationship:
Q = ΔU + W
Given the initial and final temperatures, we can calculate the change in internal energy using the specific heat capacity of air at constant volume (Cv). The change in internal energy can be calculated as:
ΔU = m * Cv * (T2 - T1)
Where m is the mass of air.
Once we have ΔU, we can calculate the heat exchanged (Q) using the equation Q = ΔU + W.
Finally, we convert the work and heat from Joules to megajoules by dividing the results by 1,000,000.
To know more about polytropic visit
https://brainly.com/question/33284577
#SPJ11
A 12 1/8 inch hole is drilled 2,652 feet into the earth. Casing that has a 9 3/4 inch outside diameter is run to the bottom of the hole. 62 barrels of a spacer fluid is pumped down the casing and up the space between the casing and the hole. If each joint of casing is 30 feet long. How far out of the drilled hole will the casing be when it is resting on the bottom of the hole? a 89 b 2634 c 30 d 18
To determine the distance out of the drilled hole the casing will be when it is resting on the bottom of the hole.
Let's begin by identifying the given values before making use of the casing movement calculation. Provided values are:Hole diameter: 12 1/8 inchDistance drilled: 2,652 feetCasing diameter: 9 3/4 inchNumber of barrels of a spacer fluid pumped down the casing: 62Length of each joint of casing: 30 feet Calculation of the casing movementThe first thing to do is to determine the total length of the casing to be run from the surface to the bottom of the drilled hole. The casing will be run in sections of 30 feet length, so the total length of the casing to be run is the quotient of the distance drilled and the length of each joint of casing.
So:Total length of casing = Distance drilled / Length of each joint of casing = 2,652 feet / 30 feet = 88.4 ≈ 89 joints of casingNext, to calculate the length of the space between the casing and the hole, we subtract the diameter of the casing from the diameter of the hole and divide by 2. Then multiply by the number of joints of casing run to the bottom of the hole, and multiply again by 12 to convert feet to inches.So: Length of space between casing and hole = [(12 1/8 inch - 9 3/4 inch) / 2] × 89 × 12= (2 3/8 inch / 2) × 89 × 12= 2.375 × 89 × 12= 2,652 ≈ 2634 inch
Finally, to calculate the distance out of the drilled hole the casing will be when it is resting on the bottom of the hole, we subtract the length of the space between the casing and the hole from the distance drilled. So: Distance out of the drilled hole = Distance drilled - Length of space between casing and hole= 2,652 feet - (2634 inch / 12)= 2,652 feet - 219.5 feet= 2,432.5 feetTherefore, the distance out of the drilled hole the casing will be when it is resting on the bottom of the hole is approximately 2,432.5 feet, which is option C.
To know more about drilled hole visit:
brainly.com/question/31140236
#SPJ11
1) Proof the back work ratio of an ideal air-standard Brayton cycle is the same as the ratio of compressor inlet (T1) and turbine outlet (T4) temperatures in Kelvin. Use cold-air standard analysis. (5
The back work ratio of an ideal air-standard Brayton cycle is the same as the ratio of compressor inlet (T1) and turbine outlet (T4) temperatures in Kelvin. Use a cold-air standard analysis.
Given data T1 = More than 100 in KelvinT4 = More than 100 in Kelvin Formula, Back Work Ratio (BWR) = Wc / Q_ in (or) W_ t / Q_ in, Where Wc = Work of compressor, W_ t = Work of turbine, and Q_ in = Heat Supplied to the cycle. Proof: The Brayton cycle is a closed-cycle in which the working fluid receives and rejects heat in the same manner.
Rankine cycle, but the working fluid is not water but air. The cycle comprises four basic components: compressor, heat exchanger, turbine, and heat exchanger, with two adiabatic expansion and compression processes. The first process is compression by the compressor.
To know more about ratio visit:
https://brainly.com/question/19257327
#SPJ11
a) Draw a fully labelled temperature/entropy diagram of the Brayton Cycle. (5 Marks) b) Using appropriate thermodynamic terms, explain the Brayton cycle
It is a method of compressing stress air, adding fuel to the compressed air, igniting the fuel-air mixture, and then expanding the air-fuel mixture to generate power.
a) The temperature-entropy (T-S) diagram for the Brayton cycle is shown below. In a gas turbine engine, the Brayton cycle is a thermodynamic cycle.
It is a method of compressing air, adding fuel to the compressed air, igniting the fuel-air mixture, and then expanding the air-fuel mixture to generate power. The following are the stages of the cycle: 1. Isentropic compression 2. Isobaric heat addition 3. Isentropic expansion 4. Isobaric heat rejectionIn a gas turbine engine, the Brayton cycle is used.
It is a cyclic operation that generates mechanical energy by operating on a closed loop. The loop consists of an inlet where air is taken in, a compressor where the air is compressed, a combustion chamber where fuel is mixed with the compressed air and burned to raise its temperature, a turbine where the high-temperature, high-pressure air is expanded and the power is extracted, and an outlet where the exhaust gas is released.
To know more about stress visit
https://brainly.com/question/33140251
#SPJ11
A particle P has velocity:
v(t) = 5 + 3t a) Find the acceleration of the particle
b) Express position (x) as a function of time given the initial condition given the initial condition x(0) = 3m (4) c) Find the distance traversed by the particle in the first 5 seconds of its motion
The particle has an acceleration of 3 m/s^2. Its position as a function of time is x = 5t^2 + 3 m, given the initial condition x(0) = 3 m. The distance traversed by the particle in the first 5 seconds is 75 m.
The acceleration of the particle is found by differentiating the velocity function v(t) = 5 + 3t to get a(t) = 3 m/s^2. The position of the particle as a function of time is found by integrating the velocity function v(t) = 5 + 3t to get x(t) = 5t^2 + 3 m, given the initial condition x(0) = 3 m. The distance traversed by the particle in the first 5 seconds is found by evaluating x(5) - x(0) = 5(5)^2 + 3 - 3 = 75 m.
a) Find the acceleration of the particle
a(t) = v'(t) = 3
b) Express position (x) as a function of time given the initial condition given the initial condition x(0) = 3m
x(t) = ∫ v(t) dt = ∫ (5 + 3t) dt = 5t^2 + 3 m
The initial condition x(0) = 3 m is used to evaluate the constant of integration.
c) Find the distance traversed by the particle in the first 5 seconds of its motion
x(5) - x(0) = 5(5)^2 + 3 - 3 = 75 m
To learn more about particle click here : brainly.com/question/14194316
#SPJ11
4. The following is the pattern of x-rays emitted according to the x-ray tube voltage when the Mo target is used.
1. Why do continuous x-rays occur?
2.Why does the swl move to the left as the tube voltage increases?
3. Why the x-ray intensity increases as the tube voltage increases
4.Why is the x-ray emitted not symmetric?
1. Continuous x-rays occur when a high energy electron strikes a metal atom in the target, causing the innermost electrons of the atom to be removed from their orbits. This process leaves an electronic vacancy in the inner shell, which can be filled by an electron from an outer shell. When an outer shell electron fills the inner shell vacancy, it releases energy in the form of an x-ray. However, because each electron shell has a different binding energy, the energy of the released x-ray varies.
2. The swl (short wavelength limit) moves to the left as the tube voltage increases because the x-ray energy and wavelength are inversely proportional. When the tube voltage increases, the energy of the emitted x-rays also increases, and the wavelength decreases. the swl shifts to the left on the graph as the tube voltage increases.
3. The x-ray intensity increases as the tube voltage increases because higher tube voltage results in more electron acceleration, which generates more x-rays. When the tube voltage is increased, more electrons are accelerated across the anode, resulting in more x-rays produced and higher x-ray intensity.
4. The x-ray emitted is not symmetric because of the characteristic x-rays and bremsstrahlung x-rays. Characteristic x-rays occur when an electron drops down to fill an inner shell vacancy, releasing energy in the form of an x-ray. The energy of characteristic x-rays is fixed because the energy difference between the two shells is fixed. Bremsstrahlung x-rays, on the other hand, are emitted when an electron is deflected by the positive charge of the nucleus.
The energy of bremsstrahlung x-rays can vary depending on the extent of electron deflection, resulting in a continuous spectrum of x-ray energies. This combination of characteristic and bremsstrahlung x-rays results in a non-symmetric distribution of x-ray energy.
To know about electron visit:
https://brainly.com/question/12001116
#SPJ11
our practical report must have an introduction where you will introduce your experiments topics and it need to be divided into 3 paragraphs,
1. Paragraph one, give a brieve definition of your topics 2. Paragraph two, give a brieve history on motor failure analyses and link it to todays applications and methods used in this day and age. 3. Paragraph three, introduce your work, (Name the paragraph the: AIM) by stating what is required from you on this assignment. [THIS IS A VERY IMPORTANT PARAGRAPH] [This paragraph and your conclusion must relate to each other]
When writing a practical report, you will need to have an introduction where you introduce your experimental topics and it should be divided into 3 paragraphs.
The following is an outline of how the introduction should be structured:
This paragraph should give a brief definition of your topics. Here, you should explain what your experimental topics are and why they are important. It is important to be clear and concise in this paragraph. This paragraph should provide a brief history of motor failure analyses and link it to today's applications and methods used in this day and age.
Here, you should explain how motor failure analyses have evolved over time and how they are used today. You should also discuss the methods used in this day and age and how they are different from the methods used in the past. This paragraph should introduce your work and state what is required from you on this assignment. You should name the paragraph the AIM.
To know more about practical visit:
https://brainly.com/question/32439310
#SPJ11
2. Consider a silicon JFET having an n-channel region of donor concentration 1x10¹⁶ cm. (a) Determine the width of the n-channel region for a pinch-off voltage of 12 V. (b) What would the necessary drain voltage (VD) be if the gate voltage is -9 V? (c) Assume the width of the n-channel region to be 40 μm. If no gate voltage is applied, what is the minimum necessary drain voltage for pinch-off to occur? (d) Assume a rectangular n-channel of length 1 mm. What would be the magnitude of the electric field in the channel for case (c) above?
The electric field in the channel is 12,000 V/m.
a) Pinch off occurs when the VGS = Vp. for silicon JFETs, Vp = |2 |V for n-channel JFETs. The channel width can be determined with the equation W = Φ/Vp, where Φ is the donor concentration in the channel. W = 1x10¹⁶ cm³/V·s/12 V = 8.3×10¹⁴ cm.
b) To maintain pinch-off with VGS = -9 V, the drain voltage (VD) must be greater than or equal to -12 V.
c) For a given channel width, the minimum VD necessary for pinch-off to occur, is Vp or 12 V.
d) The electric field in the channel can be calculated with the equation E = VD/L, where L is the length of the channel. E = 12V/1mm = 12,000 V/m.
Therefore, the electric field in the channel is 12,000 V/m.
Learn more about the electric field here:
https://brainly.com/question/11482745.
#SPJ4
Steam enters a diffuster steadily at a pressure of 400 psia and a temperature of Tdiffuser = 500.0 °F. The velocity of the steam at the inlet is Veldiffuser 80.0 ft s = and the mass flow rate is 5 lbm/s. What is the inlet area of the diffuser? ANS: 11.57in^2
The inlet area of the diffuser is 11.57 in^2.
To determine the inlet area of the diffuser, we can use the mass flow rate and the velocity of the steam at the inlet. The mass flow rate is given as 5 lbm/s, and the velocity is given as 80.0 ft/s.
The mass flow rate, denoted by m_dot, is equal to the product of density (ρ) and velocity (V) times the cross-sectional area (A) of the flow. Mathematically, this can be expressed as:
m_dot = ρ * V * A
Rearranging the equation, we can solve for the cross-sectional area:
A = m_dot / (ρ * V)
Given the values for mass flow rate, velocity, and the properties of steam at the inlet (pressure and temperature), we can calculate the density of the steam using steam tables or thermodynamic properties of the fluid. Once we have the density, we can substitute the values into the equation to find the inlet area of the diffuser.
To learn more about diffuser.
brainly.com/question/14852229
#SPJ11
When torsion subjected to long shaft, we can noticeable elastic twist. Equilibrium of a body requires both a balance of forces and balance of moments. Thermal stress is a change in temperature can cause a body to change its dimensions. Beams are classified to four types. If the beam is supported at only one end and in such a manner that the axis of the beam cannot rotate at that point. 1-:-A
Thermal stress is the stress that develops in a body due to a change in temperature, causing it to change its dimensions.
Given:When torsion subjected to long shaft, we can noticeable elastic twist. Equilibrium of a body requires both a balance of forces and balance of moments. Thermal stress is a change in temperature can cause a body to change its dimensions. Beams are classified to four types. If the beam is supported at only one end and in such a manner that the axis of the beam cannot rotate at that point.To classify the beams to four types, there are different criteria such as;1. based on supports or boundary conditions.
2. based on geometry and shape3. based on loading1. Based on supports or boundary conditions:a) Simply supported beamb) Cantilever beanc) Overhanging beamd) Fixed beam2. Based on geometry and shape:a) Rectangular beamb) T-section beamc) I-section beamd) Circular section beam3. Based on loading:a) Concentrated or point loadb) Uniformly distributed loadc) Uniformly varying loadd) Combination of the above loads.
4. Based on material properties:a) Homogeneous beamb) Composite beamc) Reinforced concrete beamd) Steel beamIf the beam is supported at only one end and in such a manner that the axis of the beam cannot rotate at that point, it is known as a cantilever beam.Torsion subjected to long shaftIf a long shaft is subjected to torsion, the torque causes a twisting effect to be induced along the axis of the shaft. The angle of twist is proportional to the torque and length of the shaft and is inversely proportional to the fourth power of the shaft radius. For torsion to be elastic, it is required that the value of the applied torque should be less than the torsional yield strength of the material.
Equilibrium of a body Equilibrium of a body is a state of balance in which no net force or net torque is acting. It requires both a balance of forces and balance of moments
Thermal stress is the stress that develops in a body due to a change in temperature, causing it to change its dimensions. It occurs when a temperature gradient exists within a body and is a result of the differential expansion or contraction of the material.
To know more about stress visit
https://brainly.com/question/33140251
#SPJ11