A single instrument that brings together all of the contract segments by reference and functions for the formal execution of the contract. Agreement Contract Clauses Progress Payments Retainage Question 58 (1 point) Pick the answer that best fits the below description Nontechnical provisions Agreement Contract Clauses Progress Payments Retainage Question 59 (1 point) Pick the answer that best fits the below description. Periodic cost reimbursements Agreement Contract Clauses Progress Payments Retainage

Answers

Answer 1

The answer that best fits the description is Progress Payments.

Progress payments are periodic cost reimbursements made to the contractor by the owner as a part of the contract agreement. They are usually made in intervals specified in the contract and are based on the completion of certain milestones or the delivery of certain deliverables.

Progress payments are payments made by a buyer to a seller at predetermined stages of construction or another project. Progress payments are usually made after a certain portion of the project is completed. They provide the seller with working capital to finance the project, while also providing the buyer with the assurance that the project is progressing as planned.

For more questions like Progress payments  click the link below:

https://brainly.com/question/29096799

#SPJ4


Related Questions

a radiograph of a pa oblique (scapular y) lateral position reveals that the scapula is slightly rotated (the vertebral and axillary borders are not superimposed). the axillary border of the scapula is determined to be more lateral compared with the vertebral border. which of the following modifications should be made for the repeat exposure?

Answers

Nothing (acceptable image because the greater tubercle is in profile) (acceptable image because the greater tubercle is in profile.)

In anatomy, a tubercle is any spherical nodule, tiny elevation, or warty protrusion found on the surface or internal organs of a plant or an animal. The word tubercle is derived from the Latin word tuberculum, which means "lump." A tubercle is typically a projection that resembles a wart, however depending on the family of plants or animals it is used to describe, it might have a slightly different connotation.

It refers to a spherical nodule, tiny prominence, or warty protrusion seen on the lip in the case of some orchids and cacti. They go by the name podaria as well (singular podarium). It is used to describe the wart-like excrescences that can be found on the roots of some members of the pea family.

To know more about tubercle click here:

https://brainly.com/question/13958464

#SPJ4

suppose a liquid level from 5.5 to 8.6 m is linearly converted to pneumatic pressure from 3 to 15 psi. what pressure will result from a level of 7.2 m? what level does a pressure of 4.7 psi represent? (linear transfer function, 4 pts)

Answers

Pressure will result from a level of  h= 7.2m then P = 9.58 psi and P=4.7 psi for h=5.94 m.

The pressure Pon a static liquid level h is

P= p₀ + ρ*g*h

p₀ is the initial pressure , ρ=density , g is the gravity

ΔP= ρ*g*Δh → ΔP/Δh

=  density *gravity = ( 15 psi - 3 psi) /( 8.6 m - 5.5 m)  

= 12/3.1 psi/m

P = P₁ + ΔP/Δh*(h -h₁)

P₁ = 3  & h₁= 5.5 m when height is 7.2 m

P = 3 psi  + 12/3.1 psi/m *(7.2 m -5.5 m) = 9.58 psi

P = 9.58 when height is 7.2 m

P=4.7 psi

4.7 psi = 3 psi  + 12/3.1 psi/m *(h -5.5 m)

h = (4.7 psi - 3 psi)/ (12/3.1 psi/m) + 5.5 m = 5.94 m

then P=4.7 psi for h=5.94 m.

Learn more about pressure  here:

https://brainly.com/question/28012687

#SPJ4

At temperatures near room temperature, the temperature dependence of the conductivity for intrinsic germanium is found to equal σ = 5= CT-3/2 exp (-Eg/2kT) where C is a temperature-independent constant and T is in Kelvins. Using Equation, calculate the intrinsic electrical conductivity of germanium at 140°C. Assume Eg=0. 67 eV and room-temperature (298 K) conductivity o=2. 2 (12-m)-1. 73. 595 (12-m)-1

Answers

The intrinsic electrical conductivity of germanium at 140°C,                        σ = 838.268 Ω/m²

What is germanium?

In the periodic table's Group 14 (IVa), germanium (Ge), a silvery-gray metalloid with properties intermediate between those of metals and nonmetals, is a chemical element that lies between silicon and tin.

German chemist Clemens Winkler made the discovery of germanium in 1886; however, Russian chemist Dmitry Ivanovich Mendeleyev had predicted the existence, characteristics, and position of germanium in the periodic table back in 1871 under the name ekasilicon.

(Winkler gave the element the name germanium, a translation of the Latin word Germania, meaning "Germany"). The value of germanium's properties as a semiconductor in electronics was not realized until after 1945, at which point the metal's economic significance began to grow.

Learn more about germanium

https://brainly.com/question/2889644

#SPJ4

Modify this program so that it writes the values in two columns, like this: 32.00 67.50 35.00 115.00 100.00 Total: 54.00 29.00 80.00 44.50 65.00 622.00 Complete the following file:

Answers

To Modify this program so that it writes the values in two columns, check the code given below.

What is program?

A computer language of some sort is used when writing programs. The source program is the language statements that you use. A language compiler is then used to compile the source code, producing what is known as an object program (not to be confused with object-oriented programming).

Object program has a number of synonyms, such as object module and compiled program. The machine language, or string of 0s and 1s, that the logic processor uses is contained in the object program.

import java.io.File;

import java.io.FileNotFoundException;

import java.io.PrintWriter;

import java.util.Scanner;

/**

* This program reads a file with numbers, and writes the numbers to another

* file, lined up in two columns, and followed by the total.

*/

public class Total {

  public static void main(String[] args) throws FileNotFoundException {

      // Prompt for the input and output file names

      Scanner console = new Scanner(System.in);

      System.out.print("Input file: ");

      String inputFileName = console.next();

      System.out.print("Output file: ");

      String outputFileName = console.next();

      // Construct the Scanner and PrintWriter objects for reading and writing

      File inputFile = new File(inputFileName);

      Scanner in = new Scanner(inputFile);

      PrintWriter out = new PrintWriter(outputFileName);

      // Read the input and write the output

      double total = 0;

      int count = 1;

      while (in.hasNextDouble()) {

          double value = in.nextDouble();

          if(count%2==1)

              out.printf("%15.2f\t", value);

          else

              out.printf("%15.2f\n", value);

          ++count;

         

          total = total + value;

      }

 if(count%2==0)

 out.printf("\n");

      out.printf("Total: %8.2f%n", total);

      in.close();

      out.close();

  }

}

Learn more about program

https://brainly.com/question/26134656

#SPJ1

a steady green light signal directed from the control tower to an aircraft in flight is a signal that the pilot. t/f

Answers

A steady green light signal directed from the control tower to an aircraft in flight is a signal that the pilot is cleared to land. A steady green light signal can also be meant by take off.

A steady green signal can be meant by “go.” A green arrow means you have a “protected” turning movement. If there is no green arrow, left and right turning traffic is “allowed”. If you are airborne, a steady green light is meant by a warning "clearance to land". It's pretty straight forward indeed. This suggests that upon your arrival the runway will be empty and you have been allowed to land there.

Learn more about a steady green light signal, here https://brainly.com/question/6918143

#SPJ4

Question 8: Several forces are applied to the pipe assembly shown. If the inner and outer diameters of the pipe are equal to 1.50-in. and 1.75-in. respectively, determine: a-The state of the stress at point H on the top outside surface of the pipe. Show the results on a volume element. b-The principal stresses and maximum shear stress. c-The principal planes and plane of maximum shear. 6 in. a: 12 in -- 1,982-psi = 0.0 T= 670-psi 10 in. b: 0 = 205-psi =-2187-psi -- 1196-psi in-plane o min τ max 30 lb 5011 Sin. c c: = -17° CW or 73° CCW = +28° CCW Sin. E 50 lb 30 lb

Answers

The difference between the primary stresses divided by one-half is the maximum shear stress. It should be noticed that two angles between 0° and 360° are produced by the primary planes equation, 2p.

Principal stress axes are perpendicular to zero shear stress planes. Orthogonal primary axes are present. The greatest shear stress is 45 degrees away from the main stress vector. The difference between the primary stresses divided by one is the maximum shear stress. Principal stresses are the highest and lowest normal stress values on a plane that is rotated through an angle and does not experience shear stress. Primary Plane On that plane, the main stresses are present, and there is no shear stress.

Learn more about stresses here-

https://brainly.com/question/17252580

#SPJ4

an architectural element that projects from a wall to support a horizontal part of a building such as beams or eaves of a roof is called:

Answers

An architectural element that projects from a wall to support a horizontal part of a building such as beams or eaves of a roof is called: Bracket.

A soffit is a horizontal, elevated aspect of any construction element that can be seen on the interior or exterior of a building. The underside of eaves (used to join a retaining wall to projecting edge(s) of the roof) is its classic form, occasionally integrating or implying the projection of beams. The bracket that gives support underneath a structure like a roof, ceiling, window, beam, or shelf is known in architecture as a corbel. In addition, a block or other system that protrudes from a building's wall is referred to as a corbel.

Learn more about system here-

https://brainly.com/question/27162243

#SPJ4

Water at P1= 20 bar, T1= 400°C enter a turbine operating at teady tate and exit at P2= 1. 5 bar, T2= 240°C. The water ma flow rate i 4000 kg/hour. Stray heat tranfer and kinetic and potential energy effect are negligible. Determine the power produced by the turbine, in kW, and the rate of entropy production in the turbine, in kW/K

Answers

The  Quality value is not 98%

How to calculate the quality value ?

Given ,

inlet pressure p1 = 20 bar

outlet pressure p2 = 1.5 bar

temperature t1 = 400°C

as assume here assume isentropic process so equation that states stray heat transfer is negligible so Q = 0  and S1 = S2

S1 = Sf2 + x Sfg2   ............ ............1

here x is quantity of steam and we get all other value by steam table

so at pressure 20 bar and 400°C and at pressure 1.5 bar

S1 = 7.127 kJ/kg K and Sf2 = 1.4336 kJ/kg K

and Sfg2 = 5.7898 kJ/kg K

so put all value in equation 1 we get x that is

x = 7.127 - 1.4336/5.7898

x = 0.9833

x = 98.33 %

so here we can say quality value is not 98%

The complete question is : Water at 20 bar, 400°C enters a turbine operating at steady state and exits at 1.5 bar. Stray heat transfer and kinetic and potential energy effects are negligible. A hard-to-read data sheet indicates that the quality at the turbine exit is 98%. Can this quality value be correct? If no, explain. If yes, determine the power developed by the turbine, in kJ per kg of water flowing.

To learn more about Isentropic process refer to :

https://brainly.com/question/12937453

#SPJ4

g (a) what is the voltage output of a transformer used for rechargeable flashlight batteries if its primary has 515 turns, its secondary has 8 turns, and the input voltage is 114 v? v (b) what input current is required to produce a 4.00 a output? ma (c) what is the power input? w

Answers

For the given data voltage output is 2.06v,input current to get 4 A output is 0.07A and power output is 14.25j.

From equation (1) we get,

Vs=125×8/485=2.06V

Therefore the output voltage of the transformer is 2.06 V

(b)

From equation (2) we get

Ip=4×8/485=0.07A

Therefore to get an output current of 4 A, the input current should be 0.07 A.

c)

p=E/t

=114/8

power output =14.25j

The voltage that a device, like a generator or a voltage regulator, releases into the air is known as the output voltage. A constant voltage is maintained by voltage regulators. Electricity is produced by spinning turbines that interact with magnets when they are powered by a fuel source, such as sunlight, coal, or nuclear energy.

Learn more about power output here:

https://brainly.com/question/20335923

#SPJ4

branch-circuit conductors to the farthest locations in residence may have to be oversized, compare to the over current protective device in order to compensate for ______.
a) voltage drop
b) expansion and contraction
c) frequency
d) future use

Answers

The NEC advises that the maximum voltage drop on the feeder or branch circuit shouldn't be more than 3% and that the maximum voltage drop on both the feeder and branch circuit shouldn't be more than 5%.

Branch Conductors are the Circuits that supply electricity to the Loads or Devices being powered by the Electrical Service Panel via the circuit breakers located in the Service Panel. Table 310-13 of the National Electric Code provides a list of the numerous insulation options. (2) The smallest conductor size authorized in residential wiring is 14 A WG, according to NEC 210-19(c). The smallest conductor size allowed for building wiring by the NEC is 14 AWG [310.5]. However, 12 AWG must be utilized as the smallest branch circuit wire per municipal codes and many industrial buildings.

Learn more about voltage here-

https://brainly.com/question/29342143

#SPJ4

9.11 viscous fluid flows past a flat plate such that theboundary layer thickness at a distance 1.3 m from the leading edgeis 12 mm. determine the boundary layer thickness at distances of0.20, 2.0, and 20 m from the leading edge. assume laminar flow. (b)if the upstream velocity of the flow in part (a) is u 1.5 m/s,determine the kinematic viscosity of the fluid.

Answers

A) The boundary layer thickness from the leading edge at distances of   0.20m = 0.004706

2.0m = 0.014884

20m = 0.04706

B) If the upstream velocity of the flow in part (a) is u 1.5 m/s, then the kinematic viscosity of the fluid at

At 0.20m, v = 6 × 10⁻⁷ m²/sec

At 2.0m, v =  6 × 10⁻⁶ m²/sec

At 20m, v =  6 × 10⁻⁵ m²/sec

What is kinematic viscosity?

A fluid's internal resistance to flow when subjected to gravitational forces is measured by a property called kinematic viscosity. A calibrated viscometer at a tightly regulated temperature is used to measure the number of seconds needed for a fixed volume of fluid to move a known distance through a capillary.

Standard units are used to translate this value into square millimeters per second or centistokes (cSt). Only when the test's temperature is reported along with the viscosity, for instance 23 cSt at 40 degrees C, is the viscosity reporting considered valid.

Viscosity testing offers the highest degree of consistency and repeatability among all used oil analysis tests. The viscosity of the base oil, meanwhile, is the factor that is most important for efficient component lubrication.

Learn more about kinematic viscosity

https://brainly.com/question/13087865

#SPJ4

The material review board at a circuit board manufacturer found that 15 percent of the diodes on the boards were inserted with the wrong polarity. the best corrective action of the following choices is
create a poka-yoke key so the diodes cannot be inserted backwards

Answers

The best corrective action of the following choices is create a poka-yoke key so the diodes cannot be inserted backwards.

What is poka-yoke concept?Poka-Yoke makes ensuring the proper circumstances are present before a process step is carried out, preventing errors from developing in the first place. When this isn't possible, Poka-Yoke plays the role of a detective, finding and fixing problems as soon as they arise.Any mechanism in a Lean manufacturing process that aids in error prevention is known as a poka-yoke. Its goal is to eliminate product flaws through the prevention, correction, or awareness of human errors as they happen.Utilizing Poka-Yoke has the advantage of facilitating first-time accuracy in people and processes, which eliminates the possibility of errors. By removing flaws, these methods can greatly raise the quality and dependability of processes and goods. This method of manufacturing blends flawlessly with the continuous improvement culture that is a key component of lean management.

To learn more about poka-yoke refer :

https://brainly.com/question/13499982

#SPJ4

a honeypot is configured to entice attackers and allows administrators to get information about the attack techniques being used.True or False

Answers

A honeypot is configured to entice attackers and allows administrators to get information about the attack techniques being used is true.

What is a honeypot?

To inflict harm so that security administrators may research the methods and intrusion entry points, hackers can easily target a honeypot. A security technique known as a honeypot is used to deter intruders from using legitimate network resources while monitoring their activity.

A security measure known as a honeypot sets up a virtual trap to entice intruders. Attackers can take advantage of flaws in a computer system that has been purposefully compromised, allowing you to research them and strengthen your security measures.

A honeypot is a safe, controlled environment used to study various threats and demonstrate how attackers operate. With a honeypot, security personnel may concentrate entirely on the threat without being diverted by actual network activity. Internal dangers can also be detected via honeypots.

To learn  more about honeypot refer to:

https://brainly.com/question/17004996

#SPJ4

TRUE/FALSE. One highly publicized form of social engineering is called post texting, which is a method of obtaining personal information under false pretenses.

Answers

Post-texting under false presenses is one well-known example of social engineering. False: This is a ruse.

What is engineering?

Applying math and science to solve issues is engineering. Engineers are the ones who translate scientific and inventive discoveries into practical applications. In engineering, science and math are used to address practical issues and create better environments for us all. The ability to put ideas into practice in a way that is both practical and cost-effective is what really sets engineers apart. What distinguishes engineers from other branches of science and mathematics is their capacity to transform abstract ideas into physical reality.

To know more about engineering
https://brainly.com/question/17169621
#SPJ4

One hundred units of coal energy are converted to electricity, which is then used to power an incandescent light bulb that produces 1.2 units of light energy. This results in a 1.2% ________.
energy end-use efficiency

Answers

One hundred units of coal energy are converted to electricity, which is then used to power an incandescent light bulb that produces 1.2 units of light energy. This results in a 1.2% energy end-use efficiency.

The relevance and advantages of taking energy end-use efficiency into account when making energy economic decisions are covered in this article, which was commissioned by the InterAcademy Council. The idea of energy end-use efficiency is to deliver more desired services for each unit of energy spent. Amory Lovins asserts that improving energy end-use efficiency is typically the most effective, cost-effective, environmentally friendly, and underutilized method of delivering energy services.

Making engineering choices based on energy end-use efficiency enables systems to use energy more efficiently along energy conversion chains, allowing for more work to be done with it. Adopting energy end-use efficiency has multiple advantages, according to this paper, including better services (comfortable buildings with more eye-catching lighting), a stronger position in the world's fuel markets, and the integration of efficiency with supply.

To know more about energy click here:

https://brainly.com/question/932825

#SPJ4

consider the loading shown. note: this is a multi-part question. once an answer is submitted, you will be unable to return to this part. identify the equation of the elastic curve for the cantilever beam ab.

Answers

The following techniques can be used to determine the equation for the elastic curve of a beam.

The first and second derivatives of the function that represents the curve in terms of the Cartesian coordinates x and y are dydx and d2ydx2, respectively. Assuming that the longitudinal stresses on the fibers are within the elastic limit, the elastic curve of a beam is the curve formed by the intersection of the neutral surface with the side of the beam. The Bending Moment Equation's double integral is taken in order to do the fundamental computation. There are formulas for both cantilever beams and beams that are simply supported. These are the calculations: Leaning beam: Cantilever beam deflection is calculated using the formula (WL**3**)/. (3EI).

Learn more about deflection here-

https://brainly.com/question/17770985

#SPJ4

Match the standards of ISO 9000 with the respective industry-specific interpretations of ISO 9000:
1. TickIT —> Information technology industry
2. AS9000 —> Aerospace manufactures
3. ISO/ TS 16949 —>American and European automotive manufacturers
4. TL 9000 —> Telecom consortiums
5. ISO 13485 —> Medical industry
6. ISO/ IED 90003 —> Computer software
7. ISO/ TS 29001 —> Petroleum, petrochemical, and natural gas industries

Answers

A corporation can accomplish ongoing improvement with ISO 9000 while also ensuring that customers are satisfied and that regulations are met. It need to be regarded as the foundational stage or level of a quality system.

The ISO 9000 specifications and their corresponding industry-specific interpretations:

1. TickIT —> Sector of information technology

2. AS9000 — Manufacturers of aerospace

3. ISO/ TS 16949 —>Automotive manufacturers in the United States and Europe

4. Telecom consortiums (TL 9000)

5. The medical industry and ISO 13485

6. ISO/ IED 90003 — Software for computers

7. ISO/ TS 29001 —> Petrochemical, natural gas, and petroleum industries.

An effective way for businesses to document the components of their quality systems is by using ISO 9000, a set of international standards on quality management and quality assurance. They can be used by organizations of any size and are not exclusive to any one sector of the economy.

30 years of ISO 9000 resources for ISO 9000: ISO 9000 vs. 9001

An individual standard within the family of quality management standards known as ISO 9000 is ISO 9001. Another member of the ISO 9000 family of standards is the ISO 9000 particular standard. The foundations and terminology for quality management systems are laid out in this standard (QMS).

To know more about ISO 9000 click here:

https://brainly.com/question/13483887

#SPJ4

what is the output frequency of a three-stage binary counter with an input clock frequency of 80 khz?

Answers

If a clock frequency is utilized, the lowest output frequency that may be used with a cascaded counter is: 10 kHz will be the output frequency that is lowest.

What is the counter's output frequency?The output frequency for a binary counter or M mod counter, depending on whether it is synchronous or asynchronous, is f/2n, where f is the input frequency and n is the number of flip-flops (but only if the duty cycle is 50%).In digital logic and computing, a counter is an object that keeps track of (and occasionally shows) the frequency of a given event or process, typically in relation to a clock.The type that is used the most frequently is a sequential digital logic circuit, which has a clock-input line and many output lines.Two states are counted by a binary three-stage counter. As a result, the output frequency is 80/23 = 80/8 = 10 khz.What is the output frequency of a 4-bit binary counter for a 160 MHz input clock? The output of a 4-bit counter's final flip-flop is equal to the input clock/16.This means that 10MHz, or 160MHz/16, is the output frequency.

To Learn more About lowest output frequency refer to:

https://brainly.com/question/26000993

#SPJ4

Determine the drag coefficient by fitting a polynomial to velocity- force data The magnitude of the aerodynamic drag force F, on a moving automobile can be modeled by the equation: F = 1 AC where p is the density of the surrounding air, A is the reference area of the automobile, and is a dimensionless constant called the drag coefficient. For a fixed car and air density, the equation can be simplified to Fa= where y acts as an effective drag coefficient with units of Force/Velocity? In this problem, you will estimate the effective drag coefficient by fitting a polynomial to drag force data. The data file, VelocityDragDataba, contains multiple force measurements (second column) taken at speeds from 15 to 150 km/h at increments of 5 kmh (first column). Code has been provided to load the data into a matrix dragpata. Velocity Force 15 5.795754 15 6.027559 15 6.040762 15 6.218395 15 6.553317 20 10.13281 20 10.73376 20 10.91766 20 11.06578 20 11.18402 25 17.02669 25 17.04141 25 17.37333 25 17.7684 25 18.65124 30 23.92056 30 23.96381 30 24.41368 30 24.64035 30 24.74886 Complete the steps below to estimate y by fitting a polynomial to the data using the polyfit function 1. Create a column vector v corresponding to the velocity 2. Create a column vector x corresponding to the Velocity values squared 3. Create a column vector y corresponding to the force 4. Plot x on the x-axis and y on the y-axis 5. Add a title to the graph (Force vs. Velocity 6. Add a lable to the z axis [Velocity (km/h) 7. Add a label to the y-axis (Drag Force (N) Script Save Reset DE MATLAB Documentation 1 dragData = load ('VehicleDragoata.txt'); X Load the data 2 V = % Get x from the first column on dragData (use :) X=% xis v squared (remember how to write power for matrix) 4 y = ; % Get y from the second column on dragForce (use :) 5 6 X Plot x on the X-axis and y on the y-axis 7 % Add title to the graph: Force vs. Velocity Add label to the X-axex: Velocity (km/h) 5 % Add label to the y-axis: Drag Force (N) 10 ► Run Script > Submit Assessment: Is v correct? is x correct? Is y correct?

Answers

Drag factor It is discovered that FD is inversely correlated with square of the object's speed. F D ∝ v 2 F D = 1 2 C ρ A v 2 , where A is the area of the object facing the fluid, C is the drag coefficient, and is the fluid's density.

The size of the drag force FD is discovered to be proportional to the square of the speed of the object for the majority of large things, such as bicycles, cars, and baseballs, when they are not travelling too slowly. This relationship can be expressed mathematically as F D v 2.

This connection changes to F D = 1 2 C A v 2 when other parameters are taken into consideration, where C is the drag coefficient, A is the area of the object confronting the fluid, and is the fluid's density. (Remember that mass per unit volume equals density.) In a more generalized form, this equation can be written as FD = bv2, where b is a constant equal to 0.5CA. For these, we've set the exponent n.

To know more about drag click here:

https://brainly.com/question/12774964

#SPJ4

technician a says that anti-freeze is added to coolant to protect the coolant from freezing and lowers the boiling point. technician b says anti-freeze lowers the freeze point and raises the boiling point of coolant. who is correct?

Answers

Both Technician A and B are correct because While raising the coolant's boiling point, it lowers the coolant's freezing point.

In order to help control engine temperature, antifreeze is a tinted liquid that you add to your radiator along with water. Ethylene glycol, which lowers water's freezing point and increases its boiling point, is a key component of the substance. By doing this, you can avoid having your radiator's water freeze, boil, or evaporate. At 212°F, water begins to steam. The boiling point of conventional ethylene glycol antifreeze is raised to 223°F by combining it with water in a 50-50 ratio; this temperature is close to that of an engine. Antifreeze is an additive that lowers a liquid's freezing point that is made of water. A mixture of antifreeze is used to lower the freezing point for cold environments and raise the boiling point for higher coolant temperatures.

Learn more about boiling point here:

https://brainly.com/question/2153588

#SPJ4

Which of the following are true regarding SNMP? (Select two.)
a. SNMPv2 requires authentication for the SNMP manager and agents to communicate with each other.
b. SNMPv2 implements encryption to obscure data during transmission.
c. SNMPv3 employs the encryption of packets to prevent unauthorized sources from snooping.
d. SNMPv2 implements message integrity verification to ensure that an SNMP packet has not been modified during transit.
d. SNMPv2c can be compromised because the community string for authentication is sent in clear text.

Answers

The encryption of packets is a technique used by SNMPv3 to stop eavesdropping by unauthorized sources. To obfuscate data during transmission, SNMPv2 employs encryption.

What purposes does SNMP serve?A networking protocol called Simple Network Management Protocol (SNMP) is used in Internet Protocol networks to manage and keep track of network-connected devices.An Internet Standard protocol called Simple Network Management Protocol is used to gather, organize, and modify data about managed devices over IP networks in order to alter device behavior.Effective switch management still frequently incorporates SNMP monitoring, which is still extensively supported. Additionally, SNMP alternatives might not be available for devices like UPSes, PDUs, printers, and IP cameras.    

To learn more about Simple Network Management Protocol refer to:

https://brainly.com/question/20435216

#SPJ4

1. (4 pts) where and how would a stress concentration occur? make drawing to illustrate some cases. 2. (4 pts) how stress concentration factor is generally defined? what are the variations? 3. (2 pts) why are the effects of stress concentrations less significant for static loading of ductile materials?

Answers

A point in the part's design where stress is significantly higher than in the surrounding area is referred to as a stress concentration.

How would a stress concentration occur?

A point in the part's design where stress is significantly higher than in the surrounding area is referred to as a stress concentration. The most frequent source of stress concentrations in a part is an abrupt change in its geometry, which typically occurs around sharp corners, holes, notches, or grooves.

How stress concentration factor is defined ?

The ratio of the maximum stress to the nominal or reference stress, known as the "stress concentration factor," or Kt, quantifies the amount of stress present in a component. In order to reduce stress concentration in machine parts, a smooth path for stress to flow through the component is typically provided. There are a number of ways to accomplish this, such as by reducing sharp corners and adding relief notches.

To learn more about  Stress concentration refer to :

https://brainly.com/question/13440326

#SPJ1

value engineering (ve) and value analysis (va) use the same methods, but va is performed in the design stage and ve is performed in the redesign stage.

Answers

The statement is false. Value engineering is a technique that is frequently used before a product is manufactured; value analysis is a technique that is used to analyse an existing product.

What is value engineering ?Value engineering is an organised effort aimed at analysing designed building features, systems, equipment, and material selections in order to achieve essential functions at the lowest life cycle cost while maintaining required performance, quality, reliability, and safety.While value engineering occurs earlier in the process to prevent value loss, value analysis occurs later and may be used to correct product deficiencies. Value engineering is typically used to aid manufacturing, whereas value analysis is more commonly used in the business or sales department.The process of designing a product to maximise the value received by the customer is known as value engineering. This is a careful activity that involves balancing the functions of a product with its financial considerations.

To learn more about value engineering refer :

https://brainly.com/question/29330228

#SPJ4

which best describes machine language? select one. question 1 options: machine language is the most used language today. machine language instructions comprise only 1s and 0s of binary code. machine language is considered the easiest language to write. machine language relies heavily on go to statements question 2 (1 point) saved listen readspeaker webreader: listen which is a type of high level programming? select one.

Answers

The best way to describe machine language is that its instructions are made up entirely of binary 1s and 0s.Python, JavaScript, Visual Basic, Delphi, Perl, PHP, ECMAScript, Ruby, C#, Java, and many other high-level programming languages are examples of ones that are currently in use.

What is Machine language?

Machine language, also known as machine code or object code, is a set of binary digits or bits that the computer reads and decodes. The only language that a computer can comprehend is machine language.

The fundamental language of computers is machine code, which is also referred to as machine language. It is made of digital binary integers, is read by the central processing unit (CPU) of the computer, and appears to be a very lengthy string of zeros and ones.

Machine language is a type of low-level programming language that can only be understood by machines and is composed of binary integers or bits. The CPU immediately executes the instructions, often known as machine code or object code. 

To learn more about Machine language refer to:

https://brainly.com/question/28432869

#SPJ4

The material review board at a circuit board manufacturer found that 15 percent of the diodes on the boards were inserted with the wrong polarity. the best corrective action of the following choices is
create a poka-yoke key so the diodes cannot be inserted backwards

Answers

The best corrective action of the following choices is create a poka-yoke key so the diodes cannot be inserted backwards.

What is poka-yoke technique ?Poka-Yoke makes ensuring the proper circumstances are present before a process step is carried out, avoiding errors from developing in the first place. When this isn't feasible, Poka-Yoke plays the role of a detective, finding and fixing problems as soon as they arise.The three primary forms of poka-yoke used in manufacturing for quality assurance are contact techniques, fixed-value methods, and motion-step methods. Each one can be used as a warning or a control technique. Sensing devices are used in contact techniques to determine if a product makes touch with a gadget.equipment used in the home, such as microwaves, washing machines, and dishwashers. The doors of many home appliances, including microwaves, washers, dryers, and dishwashers, contain safety features that prohibit them from operating when the door is open.

Learn more about poka-yoke technique refer to :

https://brainly.com/question/14787105

#SPJ4

for prob. p6.62 suppose the only pump available can deliver 80 hp to the fluid. what is the proper pipe size in inches to maintain the 3 ft'/s flow rate?

Answers

The proper pipe size in inches to maintain the 3 ft'/s flow rate is 7.3

Does pipe size affect flow rate?

The cross sectional area of the pipe has an inverse relationship with flow velocity at any given flow rate. Higher flow rates result from smaller pipes; slower speeds result from larger pipes.

According to the continuity equation, we can increase the volume flow rate, or the velocity of the fluid passing through the pipe, by reducing the pipe's diameter. The fluid velocity is unaffected by the pipe's length, whether it is longer or shorter.

Larger pipes improve the water flow through the line, but they won't boost your water pressure if the water flow isn't sufficient. Although municipal water systems offer tremendous pressure, a larger line won't necessarily be beneficial. 

To learn more about pipe size affect flow rate refer to:

https://brainly.com/question/14577591

#SPJ4

The following tabulated data were gathered from a series of Charpy impact tests on a tempered 4340 steel alloy. Temperature (°C) 0 25 50 75 100 113 125 150 175 200 Impact Energy (J) 105 104 103 97 63 40 34 28 25 24 (a) Plot the data as impact energy versus temperature. (Hint: use engineering paper for the graph) (b) Determine a ductile-to-brittle transition temperature as the temperature corresponding to the average of the maximum and minimum impact energies. (c) Determine a ductile-to-brittle transition temperature as the temperature at which the impact energy is 50J

Answers

The temperature corresponding to the average of the maximum and minimum impact energies is 65 J for the ductile-to-brittle transition temperature.

What causes ductile to brittle transition?Some metals that are ductile at room temperature become brittle at low temperatures. This is referred to as a ductile-to-brittle transition. The ductile to brittle transition temperature is strongly influenced by the metal's composition. Steel is the most common metal that exhibits this behaviour.Brittle materials fracture with little elastic deformation and no significant plastic deformation when subjected to stress.Ductility is a mechanical property that is commonly defined as a material's ability to draw. In materials science, ductility is defined as a material's ability to withstand plastic deformation under tensile stress before failing.

Average = 124J + 6J divided by 2 = 65J

According to this criterion, the ductile-to-brittle transition temperature is around -105°C, as indicated on the plot by one set of dashed lines.

A ductile to brittle transition temperature is defined as the temperature at which the impact energy is 80J. Also, as shown by the other set of dashed lines on the plot, the ductile-to-brittle transition temperature for an impact energy of 80 J is around -95°C.

To learn more about brittle refer :

https://brainly.com/question/29517921

#SPJ4

technician a says that a common rail engine can vary the injection pressure, timing, and injection rate shape for each injector. technician b says that the injection pressure is the same for all injectors in common rail engines, and injectors can perform multiple injection events during each combustion cycle. who is correct?

Answers

Technician a is correct because According to him, a common rail engine has the ability to change the injection pressure, timing, and rate shape for each injector.

An alternative to low-pressure fuel pumps feeding unit injectors is a direct fuel injection system called common rail engine direct fuel injection, which is designed on high-pressure fuel rail feeding solenoid valves. The rail functions as a fuel accumulator to keep the pressure in the engine's fuel system roughly constant at all fuelling rates. Through high pressure pipes, fuel is delivered from the rail to the injectors. Each solenoid valve within an injector is sequentially activated by current pulses produced by the ECU. Commercial common rail systems employ radial, unit, and in-line pumps. High pressure pump designs are changing to improve the fuel injection system's efficiency and enable precise rail pressure management. The pressure in the common rail can be controlled in a number of ways.

Learn more about rail engine here:

https://brainly.com/question/13833603

#SPJ4

Consider a variation of the fully developed Couette flow problem of Prob. 7-52-flow between two infinite parallel plates separated by distance
h
, with the top plate moving at speed
V top ​
and the bottom plate moving at speed
V bottom ​
as illustrated in Fig. P7-107. The flow is steady, incompressible, and two-dimensional in the
xy
-plane. Generate a dimensionless relationship for the
x
-component of fluid velocity
u
as a function of fluid viscosity
μ
, plate speeds
V top ​
and
V bottom ​
, distance
h
, fluid density
rho
, and distance
y
. (Hint: Think carefully about the list of parameters before rushing into the algebra.) FIGURE P7-107

Answers

List of parameters before diving headfirst into algebra flow between two infinite parallel plates that are spaced apart derived from newtons law of viscosity that value is 26.4 N/m².

Acoording to newtons law of viscosity

T=μdu/dy

T=μv/y

y is 50 mm = 0.05 m,v=3m/s,μ =0.44 kg /ms

T=0.44*3/0.05=26.4 N/m²

Since its molecular structure causes very little friction when it is in motion, a fluid with low viscosity flows effortlessly. Viscosity is the term used to describe the degree of motion resistance found in most fluids. When fluid layers move relative to one another, viscosity develops. It measures flow resistance that results from internal friction between the fluid layers as they pass one another during fluid flow.

Learn more about viscosity here:

https://brainly.com/question/13385698

#SPJ4

You are asked to design a completely mixed activated sludge treatment plant with biomass recycle for a town with population of 85,000. The influent flow rate is 95 gallon/capita.day, influent BOD5 is 205 mg/L and the primary clarifier removes 34% of the influent BOD5. The discharge standard for BOD5 is 10 mg/L. The aeration tank MLSS is 4,000 mg/L, of which 72% is volatile (remember bugs are measured as MLVSS). The treatability study revealed the following kinetic coefficients. k= 4.6/day Ks= 65 mg BOD5/L Y= 0.62 mg VSS/mg BOD5 μmax= 2.8/day kd= 0.04 g VSS/g VSS.day Determine:
a. Required solids and hydraulic retention times.
b. Aeration basin volume.
c. Amount of excess sludge generated daily. d. Daily required amount of oxygen and air as volume and mass(BOD5/BODLis0.68)
e. Food to microorganism sratio.
f. Volumetric organic loading rate.

Answers

It has been investigated to remove the organic debris that naturally exists in coffee manufacturing wastewater using chemical coagulation-flocculation and advanced oxidation procedures (AOP).

It has been investigated to remove the organic debris that naturally exists in coffee manufacturing wastewater using chemical coagulation-flocculation and advanced oxidation procedures (AOP). Under acidic circumstances, the efficacy of removing natural organic matter with commercial flocculants, UV/H2O2, UV/O3, and UV/H2O2/O3 procedures was assessed. To maximize the treatment effectiveness of the coffee wastewater, several operational parameters were investigated for each of these procedures.

Low total suspended particles and a high chemical oxygen demand (COD) are characteristics of coffee wastewater. Reductions in COD, color, and turbidity were used to evaluate the effectiveness of the coagulation-flocculation and photodegradation methods used to treat coffee effluent. It was discovered that chemical coagulation-flocculation treatment of the coffee wastewater could achieve a 67% COD reduction.

To know more about AOP click here:

https://brainly.com/question/1326065

#SPJ4

Other Questions
after the 2004 election, president geroge w. bush announced that would be the center piece of his domesic policy you have 2,000 feet of fencing to enclose a rectangular pasture. one side of the pasture is up against a river. what is the maximum area you could enclose? one great value of the pentavalent vaccine is that it: a. reduces the number of contacts needed to fully immunize a child b. is noninvasive c. costs less than the older generation of vaccines d. none of these are correct 1. Solve for the missing angle measures.1)a = 75dbC2)abd = 104 One day in February, the temperature at 9 A.M. is -6.8F. At 3 P.M. on the same day, The temperature is 1.72F. a) Find the change in temperature. b) Find the average hourly rate of change in temperature a 40-year-old client tells the nurse that a parent died of gastric cancer and that the client wants to do everything one can do to avoid the disease. which recommendation should the nurse provide? when bp increases and baroreceptors increase their firing rate, it causes the to be inhibited, which will ultimately cause of blood vessels which will lower bp Most people think that the more people use public transportation, it is not the case all the time because there are advantages and disadvantages. Public transportation also has advantages and disadvantages. There are three reasons for use of public transportation one advantage and two disadvantages.Is the part above good?Can you show me a proper way to write the paragraph above if there needs to be changes and corrections? raquel got a prescription to manage her asthma. the medicine is supposed to cost $150, but with her insurance, all she had to pay was a predetermined $20 fee for the prescription. what is the $20 fee called? Carefully read the passage from the Quran here. In a well-structured paragraph, write a summary that describes three main ideas in the passage.It is not righteousness that you turn your faces towards the East and the West, but righteousness is this, that one should believe in Allah and the last day and the angels and the book and the prophets, and give away wealth out of love for Him to the near of kin and the orphans and the needy and the wayfarer and the beggars and for (the emancipation of) the captives, and keep up prayer and pay the poor-rate; and the performers of their promise when they make a promise, and the patient in distress and affliction and in time of conflictthese are they who are true (to themselves), and these are they who guard (against evil).Quran 2:177 PLEEEEEASE HELP ME ASAP Fred's BMI is 32.4, his waist circumference is 44 inches and his hip circumference is 40 inches. Based on this information, his body fat distribution is associated with a high risk ofA. pernicious anemia.B. elevated HDL cholesterol.C. cardiovascular disease.D. ulcerative colitis.Answer: cardiovascular disease a portfolio comprises coke (beta of 1.6) and wal-mart (beta of 0.6). the amount invested in coke is $10,000 and in wal-mart is $20,000. what is the beta of the portfolio? control is the management function that provides a. leadership, communication, and motivation. b. structure and human resources management. c. standards, measurement, and comparisons. d. goals, objectives, strategies, and plans for success. You have decided to establish a VoIP system in your home. Which of the following devices is necessary to connect your analog telephone to your VoIP server? a. Codec b. IP-PBX c. Softphone d. ATA a jet flies 5985 miles in 4 3/4 hours. At the same rate, how long will it take the jet to fly 8505 miles? ______require high temperatures and pressures to react with other elements. Organic chemistry is currently defined as the quotient of a number n and "-3" is no less than 6. What is the value of n? you are learning about a prospective employer as you prepare for a face-to-face interview. what online resource can you use when gathering information?