Answer:
Explanation:
stiffness k = 160
m = 10
angular frequency ω = [tex]\sqrt{\frac{k}{m} }[/tex]
= [tex]\sqrt{\frac{160}{10} }[/tex]
= 4
ω = 4
Let x = 4 - A sinωt
when t = 0
x = 4 in
when t = 2 s , x = - 4
- 4 = 4 - A sinωt
8 = A sin 4 x 2
8 = A sin8
A = 8 / sin 8
= 8 / .989
= 8.09 in .
x = 4 - A sinωt
dx / dt = - Aω cosωt
v = - Aω cosωt
for t = 0
v = - Aω
= - 8.09 x 4
= - 32.36 in / s
initial velocity v = - 32.36 in /s
displacement x for t = 4s
x = 4 - 8.09 sin 4 x 4
= 4 - 8.09 sin 16
= 4 - 8.09 x - .2879
= 4 + 2.33
= 6.33 in.
c ) Amplitude of vibration A = 8.09 in .as calculated above .
Mention 4
applications of thermal expansion
thermak expansion is for cocluding the elctric value of solar panels
Answer:
thermometerscombustion enginesfitting or loosening of metallic partsproviding lift for hot-air balloonsExplanation:
The thermal expansion properties of liquids and metals are used in thermometers of many types. The liquid in a bulb thermometer expands to provide indication on a calibrated scale. Thermal expansion of a metal coil is used in dial thermometers and in thermostats of many kinds.
The thermal expansion of hot gas drives the cylinders or turbines in combustion engines, jet engines, and thermal cycle motors.
Thermal expansion of metal relative to glass can help remove a stuck jar lid. Similarly, machine parts can be expanded by heating to facilitate assembly or disassembly.
The expansion of warmer air in the atmosphere gives rise to updrafts and thermals that can be used by birds and bugs and people for gaining altitude. The expansion of air in the envelope of a hot-air balloon drives its lift as well.
A tourist being chased by an angry bear is running in a straight line toward his car at a speed of 3.60 m/s. The car is a distance d away. The bear is 39.3 m behind the tourist and running at 5.00 m/s. The tourist reaches the car safely. What is the maximum possible value for d
Answer:
101 meters
Explanation:
Distance traveled by the tourist:
d = 3.60 m/s × t
Distance traveled by the bear:
d + 39.3 m = 5.00 m/s × t
Substitute:
3.6 t + 39.3 = 5 t
39.3 = 1.4 t
t = 28.1
d = 101
Consider two identical objects released from rest high above the surface of the earth (neglect air resistance for this question).
In Case 1 we release an object from a height above the surface of the earth equal to 1 earth radius, and we measure its kinetic energy just before it hits the earth to be K1.
In Case 2 we release an object from a height above the surface of the earth equal to 2 earth radii, and we measure its kinetic energy just before it hits the earth to be K2.
Compare the kinetic energy of the two objects just before they hit the surface of the earth.
K2 = 2 K1
K2 = 4 K1
K2 = (4/3) K1
K2 = (3/2) K1
Answer:
The kinetic energies just before touching the ground are as follows;
Case 1
[tex]W_{1} = G\times M_{E}\times m \times \dfrac{1}{2 \times r_{2}}[/tex]
Case 2
[tex]W_{2} = G\times M_{E}\times m \times \dfrac{2}{3 \times r_{2}}[/tex]
The correct option is;
K2 = (4/3) K1
Explanation:
The work done is given by the relation;
For case 1
[tex]W_1 = W_{1\rightarrow 2} = G\times M_{E}\times m \times \left (\dfrac{1}{r_{2}}-\dfrac{1}{r_{1}} \right )[/tex]
Where for case 1 we have:
G = Gravitational constant = 6.67408 × 10⁻¹¹ m³/(kg·s²)
r₂ = Radius of the Earth
r₁ = 2 × Radius of the Earth = 2 × r₂
Hence;
[tex]W_2 = W_{1\rightarrow 2} = G\times M_{E}\times m \times \left ( \dfrac{1}{r_{2}} - \dfrac{1}{2\times r_{2}} \right )[/tex]
[tex]W_{1\rightarrow 2} = G\times M_{E}\times m \times \dfrac{1}{2 \times r_{2}}[/tex]
For case 2 we have:
G = Gravitational constant = 6.67408 × 10⁻¹¹ m³/(kg·s²)
r₂ = Radius of the Earth
r₁ = 3 × Radius of the Earth = 2 × r₂
Hence;
[tex]W_{1\rightarrow 2} = G\times M_{E}\times m \times \left ( \dfrac{1}{r_{2}} - \dfrac{1}{3\times r_{2}} \right )[/tex]
[tex]W_{1\rightarrow 2} = G\times M_{E}\times m \times \dfrac{2}{3 \times r_{2}}[/tex]
Therefore;
[tex]\dfrac{\Delta K2}{\Delta K1} = \dfrac{W_{2}}{W_{1}} = \dfrac{G\times M_{E}\times m \times \dfrac{2}{3 \times r_{2}}}{G\times M_{E}\times m \times \dfrac{1}{2\times r_{2}}} = \dfrac{4}{3}[/tex]
Hence;
K2 = (4/3) × K1.
. An object whose mass is 375 lb falls freely under the influence of gravity from an initial elevation of 253 ft above the surface of Earth. The initial velocity is downward with a magnitude of 10 ft/s. The effect of air resistance is negligible. (a) Determine the speed, in ft/s, of the object just before it strikes the surface of Earth. (b) Calculate the kinetic energy of the object, in Btu, before it strikes the surface of Earth. Assume that the gravitational acceleration is g
Answer:
(a) Vf = 128 ft/s
(b) K.E = 122.8 Btu
Explanation:
(a)
In order to find the velocity of the object just before striking the surface of earth or the final velocity, we use 3rd equation of motion:
2gh = Vf² - Vi²
where,
g = 32.2 ft/s²
h = height = 253 ft
Vf = Final Velocity = ?
Vi = Initial Velocity = 10 ft/s
Therefore,
(2)(32.2 ft/s²)(253 ft) = Vf² - (10 ft/s)²
16293.2 ft²/s² + 100 ft²/s² = Vf²
Vf = √(16393.2 ft²/s²)
Vf = 128 ft/s
(b)
The kinetic energy of the object before it hits the surface of earth is given by:
K.E = (0.5)(m)(Vf)²
where,
m = mass of object = 375 lb
K.E = Kinetic energy of object before it strikes the surface of earth = ?
Therefore,
K.E = (0.5)(375 lb)(128 ft/s)²
K.E = 3073725 lb.ft²/s²
Now, converting this to Btu:
K.E = (3073725 lb.ft²/s²)(1 Btu/25037 lb.ft²/s²)
K.E = 122.8 Btu
A baton twirler is twirling her aluminum baton in a horizontal circle at a rate of 2.33 revolutions per second. A baton held horizontally. Calculate the induced emf between the center and one end of the baton if the magnetic field of the Earth is 0.500 gauss and is oriented at 14.42 with respect to the horizontal. Assume the baton is 60.1 cm in length.
Answer:
Explanation:
Given that;
horizontal circle at a rate of 2.33 revolutions per second
the magnetic field of the Earth is 0.500 gauss
the baton is 60.1 cm in length.
the magnetic field is oriented at 14.42°
we wil get the area due to rotation of radius of baton is
[tex]\Delta A = \frac{1}{2} \Delta \theta R^2[/tex]
The formula for the induced emf is
[tex]E = \frac{\Delta \phi}{\Delta t}[/tex]
[tex]\phi = \texttt {magnetic flux}[/tex]
[tex]E=\frac{\Delta (BA) }{\Delta t}[/tex]
[tex]=B\frac{\Delta A}{\Delta t}[/tex]
B is the magnetic field strength
substitute
[tex]\texttt {substitute}\ \frac{1}{2} \Delta \theta R^2 \ \ for \Delta A[/tex]
[tex]E=B\frac{(\Delta \theta R^3/2)}{\Delta t} \\\\=\frac{1}{2} BR^2\omega[/tex]
The magnetic field of the earth is oriented at 14.42
[tex]\omega =2.33\\\\L=60.1c,\\\\\theta=14.42\\\\B=0.5[/tex]
we plug in the values in the equation above
so, the induce EMF will be
[tex]E=\frac{1}{2} \times (B\sin \theta)R^2\omega\\\\E=\frac{1}{2} \times (B\sin \theta)(\frac{L}{2} )\omega[/tex]
[tex]=\frac{1}{2} \times0.5gauss\times\frac{0.0001T}{1gauss} \times\sin 14.42\times(\frac{60.1\times10^-^2m}{2} )^2(2.33rev/s)(\frac{2\pi rad}{1rev} )\\\\=2.5\times10^-^5\times0.2490\times0.0903\times14.63982\\\\=2.5\times10^-^5\times0.32917\\\\=8.229\times10^-^6V[/tex]
A very long, straight solenoid with a cross-sectional area of 2.22 cm2 is wound with 85.6 turns of wire per centimeter. Starting at t = 0, the current in the solenoid is increasing according to i(t)=(0.177A/s2)t2. A secondary winding of 5.0 turns encircles the solenoid at its center, such that the secondary winding has the same cross-sectional area as the solenoid. What is the magnitude of the emf induced in the secondary winding at the instant that the current in the solenoid is 3.2A?
Answer:
The induce emf is [tex]\epsilon = 1.7966*10^{-5} V[/tex]
Explanation:
From the question we are told that
The cross-sectional area is [tex]A = 2,22 cm^3 = \frac{2.22}{10000} = 2.22*10^{-4} \ m^2[/tex]
The number of turn is [tex]N = 85.6 \ turns/cm = 85.6 \ \frac{turns }{\frac{1}{100} } = 8560 \ turns / m[/tex]
The starting time is [tex]t_o[/tex] = 0 s
The current increase is [tex]I(t) = (0.177A/s^2) t^2[/tex]
The number of turn of secondary winding is [tex]N_s = 5 \ turn s[/tex]
The current at the solenoid is [tex]I_(t) = 3.2 \ A[/tex]
at [tex]I_(t) = 3.2 \ A[/tex]
[tex]3.2 = 0.177* t^2[/tex]
=> [tex]t = \sqrt{ \frac{3.2}{0.177} }[/tex]
[tex]t = 4.25 s[/tex]
Generally Faraday's law of induction is mathematically represented as
[tex]\epsilon = A\mu_o N_s N * \frac{di}{dt}[/tex]
[tex]\epsilon = A\mu_o N_s N * \frac{d (0.177 t^2)}{dt}[/tex]
[tex]\epsilon = A\mu_o N_s N * (0.177)(2t)[/tex]
substituting values
[tex]\epsilon = (2.22*10^{-4}) * ( 4\pi * 10^{-7}) * 5 * [8560]* 0.177 * 2 * 4.25[/tex]
[tex]\epsilon = 1.7966*10^{-5} V[/tex]
When light with a wavelength of 225 nm is incident on a certain metal surface, electrons are ejected with a maximum kinetic energy of 2.98 × 10-19 J. Determine the wavelength (in nm) of light that should be used to double the maximum kinetic energy of the electrons ejected from this surface.
Answer:
The new wavelength is 112.5 nm.
Explanation:
It is given that,
When light with a wavelength of 225 nm is incident on a certain metal surface, electrons are ejected with a maximum kinetic energy of 2.98 × 10⁻¹⁹ J. We need to find the wavelength (in nm) of light that should be used to double the maximum kinetic energy of the electrons ejected from this surface.
The energy of incident electron is given by :
[tex]E=\dfrac{hc}{\lambda}[/tex]
New energy is 2 E and new wavelength is [tex]\lambda'[/tex]. So,
[tex]\dfrac{E}{2E}=\dfrac{\lambda'}{\lambda}\\\\\dfrac{1}{2}=\dfrac{\lambda'}{\lambda}\\\\\lambda'=\dfrac{\lambda}{2}\\\\\lambda'=\dfrac{225}{2}\\\\\lambda=112.5\ nm[/tex]
So, the new wavelength is 112.5 nm.
Motion maps for two objects, Y and Z, are shown.
A motion map. The position line is a long black arrow pointing right with x as the reference point at left. Above the line are three dots, each with a vector pointed away from x back to back in a line labeled B. Above B, there are four dots, each with a shorter vector pointing away from x in a line labeled A starting closer to x .
Object Z passes object Y after how many seconds?
2
3
4
5
Answer: it takes 3 seconds (b)
Explanation:
Answer: B. 3
Explanation:
Each black point on the map represents one second. There are three black points with vectors representing Z's movement before Y begins to move.
Consider the previous situation. Under what condition would the acceleration of the center of mass be zero? Keep in mind that F1x and F2x represent the components, of the corresponding forces. Consider the previous situation. Under what condition would the acceleration of the center of mass be zero? Keep in mind that and represent the components, of the corresponding forces. F1x=−F2x F1x=F2x m1=m2 m1≪m2
Answer:
a) m₁ = m₂ F₁ₓ = F₂ₓ
b) m₁ << m₂ F₂ₓ =0
Explanation:
This interesting exercise is unclear your statement, so that in a center of mass system has an acceleration of zero it is necessary that the sum of the forces on each axis is zero, to see this we write Newton's second law
∑ F = m a
for acceleration to be zero implies that the net force is zero.
we must write the expression for the center of mass
[tex]x_{cm}[/tex] = 1 / M (m₁ x₁ + m₂ x₂)
now let's use the derivatives
[tex]a_{cm}[/tex] = d² x_{cm}/dt² = 1 / M (m₁ a₁ + m₂a₂)
where M is the total mass M = m₁ + m₂
so that the acceleration of the center of mass is zero
0 = 1 / M (m₁ a₁ + m₂a₂)
m₁ a₁ = - m₂ a₂
In the case that we have components on the x axis, the modulus of the two forces are equal and their direction is opposite, therefore
F₁ₓ = -F₂ₓ
b)r when the two masses are equal , in the case of a mass greater than the other m₁ << m₂
acm = d2 xcm / dt2 = 1 / M (m1 a1 + m2a2)
so that the acceleration of the center of mass is zero
0 = 1 / M (m1 a1 + m2a2)
m1 a1 = - m 2 a2
with the initial condition, we can despise m₁, therefore
0 = m₂a₂
if we use Newton's second law
F₂ = 0
I tell you that in this case with a very high mass difference the force on the largest mass must be almost zero
An airplane flies in a loop (a circular path in a vertical plane) of radius 200 m . The pilot's head always points toward the center of the loop. The speed of the airplane is not constant; the airplane goes slowest at the top of the loop and fastest at the bottom
(a) What is the speed of the airplane at the top of the loop, where the pilot feels weightless?
(b) What is the apparent weight of the pilot at the bottom of the loop, where the speed of the air-plane is 280 km/h? His true weight is 700 N.
Answer:
Explanation:
a ) for the pilot to feel weightless , his weight will provide the centripetal force . The reaction force from airplane will be zero.
mg = mv² / r
g = v²/r
v² = gr
= 9.8 x 200
v = 44.27 m / s .
b )
v = 280 km / h
v = 77.77 m /s
If R be the reaction force of floor of airplane on him
R - mg = mv² / r
R = mg + m v² / r
= 700 + 70 x 77.77² / 200 ( m = mg / g = 700/ 10 = 70 )
= 700 + 2116.86
= 2816.86 N .
A frog hops at 2.45 m/s a distance of 2.11 m. How long does it take?
Answer:
Explanation:I don't say u must have to mark my ans as brainliest but if it has really helped u plz don't forget to thnk me...
Answer:
0.86s
Explanation:
How long it takes is the time required.
Time = distance /speed
Time =2.11/2.45=0.86s
An uncharged, nonconducting, hollow sphere of
radius 10.0 cm surrounds a 10.0-uC charge located
at the origin of a Cartesian coordinate system. A drill
with a radius of 1.00 mm is aligned along the z axis,
and a hole is drilled in the sphere. Calculate the elec-
tric flux through the hole.
Answer:
Explanation:
The whole surface of hollow sphere = 4π r²
= 4 x 3.14 x (10 x 10⁻²)²
= 12.56 x 10⁻² m²
Area of the hole ( both side ) = 2 x π r²
= 2 x 3.14 x (10⁻³)²
= 6.28 x 10⁻⁶ m²
flux coming out of given charge at the centre as per Gauss's theorem
= q / ε₀ where q is charge at the centre and ε₀ is permittivity of the medium .
= 10 x 10⁻⁶ / 8.85 x 10⁻¹²
= 1.13 x 10⁶
This flux will pass through the surface of sphere so flux passing through per unit area
= 1.13 x 10⁶ / 12.56 x 10⁻²
= 8.99 x 10⁶ weber per m²
flux through area of hole
= 8.99 x 10⁶ x 6.28 x 10⁻⁶
= 56.45 weber .
A cycler leaves home and rides due south for 65 km. She returns home on the same road. What is the cycler's
displacement?
Y
It doesn't matter what direction she travels, or how far, or whether she uses the same road in both directions.
If she ends up at the same place she started from, then her displacement for the ride is zero.
What is (Fnet3)x, the x-component of the net force exerted by these two charges on a third charge q3 = 55.0 nC placed between q1 and q2 at x3 = -1.220 m ? Your answer may be positive or negative, depending on the direction of the force. Express your answer numerically in newtons to three significant figures.
Complete Question
Part of the question is shown on the first uploaded image
The rest of the question
What is (Fnet3)x, the x-component of the net force exerted by these two charges on a third charge q3 = 55.0 nC placed between q1 and q2 at x3 = -1.220 m ? Your answer may be positive or negative, depending on the direction of the force. Express your answer numerically in newtons to three significant figures.
Answer:
The net force exerted on the third charge is [tex]F_{net}= 3.22*10^{-5} \ J[/tex]
Explanation:
From the question we are told that
The third charge is [tex]q_3 = 55 nC = 55 *10^{-9} C[/tex]
The position of the third charge is [tex]x = -1.220 \ m[/tex]
The first charge is [tex]q_1 = -16 nC = -16 *10^{-9} \ C[/tex]
The position of the first charge is [tex]x_1 = -1.650m[/tex]
The second charge is [tex]q_2 = 32 nC = 32 *10^{-9} C[/tex]
The position of the second charge is [tex]x_2 = 0 \ m[/tex]
The distance between the first and the third charge is
[tex]d_{1-3} = -1.650 -(-1.220)[/tex]
[tex]d_{1-3} = -0.43 \ m[/tex]
The force exerted on the third charge by the first is
[tex]F_{1-3} = \frac{k q_1 q_3}{d_{1-3}^2}[/tex]
Where k is the coulomb's constant with a value [tex]9*10^{9} \ kg\cdot m^3\cdot s^{-4}\cdot A^2.[/tex]
substituting values
[tex]F_{1-3} = \frac{9*10^{9}* 16 *10^{-9} * (55*10^{-9})}{(-0.43)^2}[/tex]
[tex]F_{1-3} = 4.28 *10^{-5} \ N[/tex]
The distance between the second and the third charge is
[tex]d_{2-3} = 0- (-1.22)[/tex]
[tex]d_{2-3} =1.220 \ m[/tex]
The force exerted on the third charge by the first is mathematically evaluated as
[tex]F_{2-3} = \frac{k q_2 q_3}{d_{2-3}^2}[/tex]
substituting values
[tex]F_{2-3} = \frac{9*10^{9} * (32*10^{-9}) *(55*10^{-9})}{(1.220)^2}[/tex]
[tex]F_{2-3} = 1.06*10^{-5} N[/tex]
The net force is
[tex]F_{net} = F_{1-3} -F_{2-3}[/tex]
substituting values
[tex]F_{net} = 4.28 *10^{-5} - 1.06*10^{-5}[/tex]
[tex]F_{net}= 3.22*10^{-5} \ J[/tex]
The net force on the third charge is -3.216 x 10⁻⁵ N.
The given parameters:
Third charge, q3 = 55 nCFirst charge, q1 = -16 nCSecond charge q2 = 32 nCPosition of third charge, x3 = -1.22 mPosition of first charge, x1 = -1.65 mPosition of the second charge, x2 = 0 mThe force on the third charge due to the first charge is calculated as follows;
r = x1 - x3
r = -1.65 - (-1.22)
r = -0.43 m
[tex]F_{13} = \frac{9\times 10^9 \times (-16 \times 10^{-9}) \times (55 \times 10^{-9})}{(0.43)^2} \\\\F_{13} = -4.28 \times 10^{-5} \ N[/tex]
The force on the third charge due to the second charge is calculated as follows;
[tex]F_{23} = \frac{kq_2 q_3}{r^2} \\\\F_{23} = \frac{9\times 10^9 \times (32 \times 10^{-9}) \times (55 \times 10^{-9})}{(1.22)^2} \\\\F_{23} = 1.064 \times 10^{-5} \ N[/tex]
The net force on the third charge is calculated as follows;
[tex]F_{net} = F_{13} + F_{23}\\\\F_{net} = -4.28 \times 10^{-5} \ N \ + \ 1.064 \times 10^{-5} \ N\\\\F_{net} = -3.216 \times 10^{-5} \ N[/tex]
Learn more about net force here: https://brainly.com/question/14361879
4. Water is flowing at 12m/s in a horizontal pipe under a pressure of 600kpa
radius 2cm.
a. What is the speed of the water on the other side of 0.5cm radius?
b. What is the pressure of the other side?
Answer:
a. 192 m/s
b. -17,760 kPa
Explanation:
First let's write the flow rate of the liquid, using the following equation:
Q = A*v
Where Q is the flow rate, A is the cross section area of the pipe (A = pi * radius^2) and v is the speed of the liquid. The flow rate in both parts of the pipe (larger radius and smaller radius) needs to be the same, so we have:
a.
A1*v1 = A2*v2
pi * 0.02^2 * 12 = pi * 0.005^2 * v2
v2 = 0.02^2 * 12 / 0.005^2
v2 = 192 m/s
b.
To find the pressure of the other side, we need to use the Bernoulli equation: (600 kPa = 600000 N/m2)
P1 + d1*v1^2/2 = P2 + d1*v2^2/2
Where d1 is the density of the liquid (for water, we have d1 = 1000 kg/m3)
600000 + 1000*12^2/2 = P2 + 1000*192^2/2
P2 = 600000 + 72000 - 1000*192^2/2
P2 = -17760000 N/m2 = -17,760 kPa
The speed in the smaller part of the pipe is too high, the negative pressure in the second part means that the inicial pressure is not enough to maintain this output speed.
100picometer is equal to
Answer:
100picometer is equal to:
0.1 NanometreExplanation:
Hope this works !!From the edge of a cliff, a 0.41 kg projectile is launched with an initial kinetic energy of 1430 J. The projectile's maximum upward displacement from the launch point is 150 m. What are the (a) horizontal and (b) vertical components of its launch velocity
Answer:
v₀ₓ = 63.5 m/s
v₀y = 54.2 m/s
Explanation:
First we find the net launch velocity of projectile. For that purpose, we use the formula of kinetic energy:
K.E = (0.5)(mv₀²)
where,
K.E = initial kinetic energy of projectile = 1430 J
m = mass of projectile = 0.41 kg
v₀ = launch velocity of projectile = ?
Therefore,
1430 J = (0.5)(0.41)v₀²
v₀ = √(6975.6 m²/s²)
v₀ = 83.5 m/s
Now, we find the launching angle, by using formula for maximum height of projectile:
h = v₀² Sin²θ/2g
where,
h = height of projectile = 150 m
g = 9.8 m/s²
θ = launch angle
Therefore,
150 m = (83.5 m/s)²Sin²θ/(2)(9.8 m/s²)
Sin θ = √(0.4216)
θ = Sin⁻¹ (0.6493)
θ = 40.5°
Now, we find the components of launch velocity:
x- component = v₀ₓ = v₀Cosθ = (83.5 m/s) Cos(40.5°)
v₀ₓ = 63.5 m/s
y- component = v₀y = v₀Sinθ = (83.5 m/s) Sin(40.5°)
v₀y = 54.2 m/s
What is a major criticism of Maslow's hierarchy of needs? Select one: a. It is subjective. b. It does not take gender differences into account. c. It is humanistic. d. It only accounts for the objective world.
The correct answer is A. It is subjective
Explanation:
In 1943, the recognized psychologist Abraham Maslow proposed a theory to understand and classify human needs. The work of Maslow included five different categories to classify all basic needs, psychological needs, and self-esteem needs; additionally, in this, Maslow proposed individuals need to satisfy the needs of previous levels to satisfy more complex needs. For example, the first level includes physiological needs such as hunger and these are necessary to get to more complex needs such as the need for safety or self-satisfaction.
This hierarchy is still used all around the world to understand human needs; however, it was been widely criticized because the classification itself is related to Maslow's perspective as this was mainly based on Maslow's ideas about needs, which makes the hierarchy subjective. Also, due to its subjectivity, the hierarchy may apply only in some individuals or societies.
A stiff wire 32.5 cm long is bent at a right angle in the middle. One section lies along the z axis and the other is along the line y=2x in the xy plane. A current of 25.0 A flows in the wire-down the z axis and out the line in the xy plane. The wire passes through a uniform magnetic field given by B =(0.318i)T.
Determine the magnitude and the direction of the total force on the wire.
Answer: i personally think it would be 789
Explanation:
Hopefully I am right
A plane accelerates from rest at a constant rate of 5.00 m/s2 along a runway that is 1800 m long. Assume that the plane reaches the required takeoff velocity at the end of the runway. What is the time tTO needed to take off? Express your answer in seconds using three significant figures.
Answer:
26.8 seconds
Explanation:
To solve this problem we have to use 2 kinematics equations: *I can't use subscripts for some reason on here so I am going to use these variables:
v = final velocity
z = initial velocity
x = distance
t = time
a = acceleration
[tex] {v}^{2} = {z}^{2} + 2ax[/tex]
[tex]v = z + at[/tex]
First let's find the final velocity the plane will have at the end of the runway using the first equation:
[tex] {v}^{2} = {0}^{2} + 2(5)(1800)[/tex]
[tex]v = 60 \sqrt{5} [/tex]
Now we can plug this into the second equation to find t:
[tex]60 \sqrt{5} = 0 + 5t[/tex]
[tex]t = 12 \sqrt{5} [/tex]
Then using 3 significant figures we round to 26.8 seconds
Two masses, each weighing 1.0 × 103 kilograms and moving with the same speed of 12.5 meters/second, are approaching each other. They have a head-on collision and bounce off away from each other. Assuming this is a perfectly elastic collision, what will be the approximate kinetic energy of the system after the collision?
A. 1.6 × 105 joules
B. 2.5 × 105 joules
C. 1.2 × 103 joules
D. 2.5 × 103 joules
Answer:
A. 1.6 × 105 joules
Explanation:
As per the question, the data given in the question is as follows
Number of masses = 2
Each weightage = [tex]1.0 \times 2.3[/tex]
Speed = 12.5 meters/ second
Based on the above information, the approximate kinetic energy after the collision is
A perfectly elastic collision is described as one where the collision does not cause any loss of kinetic energy.
So we sum the kinetic energy of each kind of system which is given below:
Kinetic energy is
[tex]= 0.5(1.0 \times 10^3) (12.5)^2 + 0.5 (1.0 \times 10^3) (12.5 )^2[/tex]
= 156250 J
[tex]= 1.6 \times 10^5 J[/tex]
A turtle and a rabbit are in a 150 meter race. The rabbit decides to give the turtle a 1 minute head start. The turtle moves at a constant speed of 0.500 m/s through the whole race (in fact the turtle even starts at a velocity of 0.500 m/s as while he was still approaching the starting line he was allowed to continue to keep going without stopping). The rabbit starts the race from rest and accelerates at a rate or 1.50 m/s2 until she reaches her top speed of 10 m/s. She then finishes the race running at a constant speed of 10 m/s. a) What is the turtle’s position when the rabbit starts to run (1 minute into the race)? b) How long does it take the turtle to finish the race? c) How long does it take the rabbit to reach max speed? d) What is the rabbit’s position when she reaches max speed? e) How long does it take the rabbit to finish the race? f) Who won?
Answer:
a) [tex]s_{T} = 30\,m[/tex], b) [tex]t = 5\,min[/tex], c) [tex]\Delta t = 6.667\,s[/tex], d) [tex]\Delta s_{R} = 33.333\,m[/tex], e) [tex]t' = 11.667\,s[/tex], f) The rabbit won the race.
Explanation:
a) As turtle moves at constant speed, its position is determined by the following formula:
[tex]s_{T} = v_{T}\cdot t[/tex]
Where:
[tex]t[/tex] - Time, measured in seconds.
[tex]v_{T}[/tex] - Velocity of the turtle, measured in meters per second.
[tex]s_{T}[/tex] - Position of the turtle, measured in meters.
Then, the position of the turtle when the rabbit starts to run is:
[tex]s_{T} = \left(0.5\,\frac{m}{s} \right)\cdot (60\,s)[/tex]
[tex]s_{T} = 30\,m[/tex]
The position of the turtle when the rabbit starts to run is 30 meters.
b) The time needed for the turtle to finish the race is:
[tex]t = \frac{s_{T}}{v_{T}}[/tex]
[tex]t = \frac{150\,m}{0.5\,\frac{m}{s} }[/tex]
[tex]t = 300\,s[/tex]
[tex]t = 5\,min[/tex]
The time needed for the turtle to finish the race is 5 minutes.
c) As rabbit experiments a constant acceleration until maximum velocity is reached and moves at constant speed afterwards, the time required to reach such speed is:
[tex]v_{R} = v_{o,R} + a_{R}\cdot \Delta t[/tex]
Where:
[tex]v_{R}[/tex] - Final velocity of the rabbit, measured in meters per second.
[tex]v_{o,R}[/tex] - Initial velocity of the rabbit, measured in meters per second.
[tex]a_{R}[/tex] - Acceleration of the rabbit, measured in [tex]\frac{m}{s^{2}}[/tex].
[tex]\Delta t[/tex] - Running time, measured in second.
[tex]\Delta t = \frac{v_{R}-v_{o,R}}{a_{R}}[/tex]
[tex]\Delta t = \frac{10\,\frac{m}{s}-0\,\frac{m}{s}}{1.50\,\frac{m}{s^{2}} }[/tex]
[tex]\Delta t = 6.667\,s[/tex]
The time taken by the rabbit to reach maximum speed is 6.667 s.
d) On the other hand, the position reached by the rabbit when maximum speed is reached is determined by the following equation of motion:
[tex]v_{R}^{2} = v_{o,R}^{2} + 2\cdot a_{R}\cdot \Delta s_{R}[/tex]
[tex]\Delta s_{R} = \frac{v_{R}^{2}-v_{o,R}^{2}}{2\cdot a_{R}}[/tex]
[tex]\Delta s_{R} = \frac{v_{R}^{2}-v_{o,R}^{2}}{2\cdot a_{R}}[/tex]
Where [tex]\Delta s_{R}[/tex] is the travelled distance of the rabbit from rest to maximum speed.
[tex]\Delta s_{R} = \frac{\left(10\,\frac{m}{s} \right)^{2}-\left(0\,\frac{m}{s} \right)^{2}}{2\cdot \left(1.50\,\frac{m}{s^{2}} \right)}[/tex]
[tex]\Delta s_{R} = 33.333\,m[/tex]
The distance travelled by the rabbit from rest to maximum speed is 33.333 meters.
e) The time required for the rabbit to finish the race can be determined by the following expression:
[tex]t' = \frac{\Delta s_{R}}{v_{R}}[/tex]
[tex]t' = \frac{150\,m-33.333\,m}{10\,\frac{m}{s} }[/tex]
[tex]t' = 11.667\,s[/tex]
The time required for the rabbit from rest to maximum speed is 11.667 seconds.
f) The animal with the lowest time wins the race. Now, each running time is determined:
Turtle:
[tex]t_{T} = 300\,s[/tex]
Rabbit:
[tex]t_{R} = 60\,s + 6.667\,s + 11.667\,s[/tex]
[tex]t_{R} = 78.334\,s[/tex]
The rabbit won the race as [tex]t_{R} < t_{T}[/tex].
The equation = [(8.0 )(4.0)]cos(1.0) describes a wave generated by a sonometer. State whether or not the wave is a stationary wave and find its amplitude, with given that = 2.0 cm
Answer:
Yes. the wave is a stationary wave
Amplitude=7.91 cm
Explanation:
We are given that an equation
[tex]y=[8.0sin(4.0x)]cos(1.0t)[/tex]
We have to find that the given wave is a stationary wave or not and find its amplitude at x=2.0 cm
We know that equation of stationary wave
[tex]y(x,t)=2Asin(kx)cos(\omega t)[/tex]
Where
Amplitude=[tex]2Asin(kx)[/tex]
The given equation is of the form of stationary wave equation.
By comparing we get
[tex]2Asin(kx)=8sin(4.0x)[/tex]
Substitute the value of x
Therefore, the amplitude of the wave
Amplitude=[tex]8sin(4.0\times 2.0)=7.91 cm[/tex]
Two cannonballs are dropped from a second-floor physics lab at height h above the ground. Ball B has four times the mass of ball A. When the balls pass the bottom of a first-floor window at height above the ground, the relation between their kinetic energies, KA and KB, is:_______.A) KA- 4KB B) KA 2KB C) KA KB D) KB 4KA.
Formula of kinetic energy
[tex]e = \frac{1}{2} m {v}^{2} [/tex]
Therefore Kinetic energy of ball B is 4 times more than ball A.
ans is KB=4KA
Bats use sound to sense objects by sending out short ultrasound pulses and listening for the echo off the object. A. Sketch the ultrasound pulse leaving the bat, reflecting off the object and returning to the bat. B. If a stationary bat is 43 m from an object, how much time elapses between when the bat emits the pulse and it hears the echo
Answer:
B. t = 0.250s
Explanation:
A. An image with the sketch of the bat emitting a sound, which reflects on a surface and return to the bat is attached below.
B. In order to calculate the time that the pulse emitted by the bat, return to the bat, you first calculate the time that pulse takes to arrive to the object.
You use the following formula:
[tex]x=vt[/tex] (1)
x: distance to the object = 43m
t: time = ?
v: speed of sound beat = 343 m/s
You solve the equation (1) for t:
[tex]t=\frac{x}{v}=\frac{43m}{343m/s}=0.125s[/tex]
The time on which the bat hears the echo is twice the value of t, that is:
[tex]t'=2(0.125s)=0.250s[/tex]
The time on which bat heart the echo of its sound, from the moment on which bat emitted it, is 0.250s
A woman is driving her truck with speed 45.0 mi/h on a horizontal stretch of road. (a) When the road is wet, the coefficient of static friction between the road and the tires is 0.105. Find the minimum stopping distance (in m). m (b) When the road is dry, μs = 0.602. Find the minimum stopping distance (in m).
Answer:
Explanation:
45 mi /h = 45 x 1.6 x 1000 / (60 x 60) m /s
= 20 m /s
Maximum frictional force possible on wet road
= μs x mg where μs is coefficient of static friction and m is mass of body
Applying work energy theorem
work done by friction = kinetic energy of truck
μs x mg x d = 1/2 m v ² where v is velocity of body and d is stopping distance
2xμs x g x d = v²
2 x .105 x 9.8 x d = 20 x 20
d = 194.36 m
b )
In this case
μs = 0.602
Inserting this value in the relation above
2xμs x g x d = v²
2 x .602 x 9.8 x d = 20 x 20
d = 33.9 m .
When the road is wet, the minimum stopping distance is 196.7 m
When the road is dry, the minimum stopping distance is 34.3 m.
The given parameters;
speed of the truck, v = 45 mi/hThe speed of the truck in m/s is calculated as follows;
[tex]v = \frac{45 \ mi}{h} \times \frac{1609.34 \ m}{1 \ mile} \times \frac{1 \ h}{3600 \ s} \\\\v = 20.12 \ m/s[/tex]
The work done by friction is calculated by applying work-energy theorem;
[tex]F_k d = \frac{1}{2} mv^2\\\\\mu_k mg d = \frac{1}{2} mv^2\\\\ 2 \mu_k g d = v^2\\\\d = \frac{v^2}{2\mu_k g} \\\\[/tex]
When the road is wet, the minimum stopping distance is calculated as follows;
[tex]d = \frac{20.12^2}{2 \times 0.105 \times 9.8} \\\\d = 196.7 \ m[/tex]
When the road is dry, the minimum stopping distance is calculated as follows;
[tex]d = \frac{(20.12)^2}{2\times 0.602 \times 9.8} \\\\d = 34.3 \ m[/tex]
Learn more here: https://brainly.com/question/10063455
Hellppppppppppp please thanks
Point C would the greatest
A basketball player jumps straight up for a ball. To do this, he lowers his body 0.310 m and then accelerates through this distance by forcefully straightening his legs. This player leaves the floor with a vertical velocity sufficient to carry him 0.920 m above the floor.(a) Calculate his velocity when he leaves the floor. (b) Calculate his acceleration while he is straightening his legs. He goes from zero to the velocity found in (a) in a distance of 0.300 m. (c) Calculate the force he exerts on the floor to do this, given that his mass is 110.0 kg.
Answer:
a) v₀ = 4.25 m / s , b) a = 30.1 m / s², c) F = 3311 N
Explanation:
a) to calculate the speed with which it leaves the ground we use the kinematic relations
v² = v₀² - 2 g y
where the speed at the highest point is zero (v = 0) and the height is y = 0.920m, this implies that our reference system is on the ground
v₀ = √ 2gy
let's calculate
v₀ = √(2 9.8 0.920)
v₀ = 4.25 m / s
b) to find the acceleration to reach the speed of v = 4.25 m over a distance of y = 0.300 m
v² = v₀² + 2 a y
in this case it starts from an initial velocity of zero
v² = 2 a y
a = v² / 2y
let's calculate
a = 4.25² / (2 0.300)
a = 30.1 m / s²
c) to calculate the force we use Newton's second law
F = m a
let's calculate
F = 110.0 30.1
F = 3311 N
You're caught running a red light on Hwy 316. Attempting to impress the skeptical patrol officer with your physics knowledge, you claim that you were traveling so fast that the red light (685 nm) appeared yellow (590 nm) to you. How fast would you have been traveling (in mi/hr) if that had been the case?
Answer:
Explanation:
We shall apply here Doppler's effect in optics . The formula is as follows
[tex]\frac{\triangle\lambda }{\lambda } = \frac{v}{c}[/tex]
Δλ is change in wavelength , λ is original wavelength , v is velocity and c is velocity of light
Δλ = 685 - 590 = 95 nm
λ = 685
95 / 685 = v / 3 x 10⁸
v = .416 x 10⁸ m / s
= 4.16 x 10⁷ m /s
You have two balloons, one that has a spherical core of radius 4 cm and the other that is tubular with a radius of 0.5 cm and a length of 8 cm. Knowing that the force that you can initially apply to trying to expand each balloon is directly proportional to the volume of the balloon, show that the higher initial stress is achievable with the spherical balloon.
Answer:
Explanation:
Given That:
radius of spherical core r₁ = 4cm
radius of tubular r₂ = 0.5cm
length of tubular l = 8cm
Volume of spherical V₁
[tex]=\frac{4}{3} \pi r_1^3[/tex]
[tex]=\frac{4}{3} \pi(4)^3\\\\=\frac{4}{3} \pi 64\\\\=268.1cm^3[/tex]
Volume of tabular V₂
[tex]=\pi r ^2_2h[/tex]
[tex]=\pi(0.5)^2\times 8\\\\ =\pi 90.250\times8\\\\ =\pi 2\\\\=6.283cm^3[/tex]
F ∝ V
[tex]F_1 \propto V_1[/tex] and [tex]F_2 \propto V_2[/tex]
As V₁ is greater than V₂
⇒ F₁ is greater than F₂
F is force
V is volume
This is the required answer