Answer:
Condensation is the process of water vapor condensing into liquid water.
Explanation:
"Water condenses on a can of cold soda. Water vapor in the air reaches its dew point as it cools in the air around the can, forming liquid drops of water. Condensation is the process where water vapor becomes liquid. It is the reverse of evaporation, where liquid water becomes a vapor." -National Geographic"
A certain metal M forms a soluble sulfate salt M2SO4. Suppose the left half cell of a galvanic cell apparatus is filled with a 50.0mM solution of M2SO4 and the right half cell with a 5.00M solution of the same substance. Electrodes made of M are dipped into both solutions and a voltmeter is connected between them. The temperature of the apparatus is held constant at 20.0°C.
Which electrode will be positive?
Left
Right
Answer:
Right
Explanation:
The given parameters are;
The soluble sulfate formed by the metal, M = M₂SO₄
In the galvanic cell formed by the metal M, we have;
The concentration of M₂SO₄ in the left half cell = 50.0 mM = 0.05 M
The concentration of M₂SO₄ in the right half cell = 5.00 M
In the galvanic cell, the metal 'M' will be dissolved into the solution with lower concentration as M²⁺ which is the left half cell, making the cell negative and the solution more concentrated
In the right half cell, the metal 'M²⁺' in the solution will be plated unto the electrode making the solution less concentrated and the electrode in the right half cell will be the positive electrode
Therefore;
The electrode which will be positive is the electrode in the right half cell.
Find A in degrees. Round to the
nearest tenth.
С
a = 7
b
b = 4
a
C = 8
B
A
С
A = [?]
Answer:
61 degrees
Explanation:
If the student added larger drops to the pan, the
what?of the waves would increase.
Answer:
this makes no sense you arent gonna get help
Explanation:
Answer:
Amplitude
Explanation:
Im taking this test rn lol
Which molecule is a stereoisomer of trans-2-pentene?
Answer:
cis-2-pentene
Explanation : The stereoisomers are the compound which differs only in the spatial arrangement of the atoms across the stereogenic centers.
There are mainly two forms of stereoisomers cis and trans. Cis-isomers are those where the two bulky or functional groups are arranged on the same side across the stereogenic center; whereas, in trans-isomers the two bulky groups or functional groups are arranged in the opposite sides of stereogenic center.
what are the products in a chemical reaction?
Answer:
it's c trust me
Explanation:
c cause it's c
Answer:
d
Explanation:
i dont know
makes the most sense to me
Palladium-100 has a half-life of 4 days. If you started with 20g of Palladium-100, how much would remain after 8 days?
A. 0g
B. 2.5g
C. 10g
D. 5g
Answer:
the answer is i think it's b
Explanation:
help pls it's about cells
I’m kinda stuck with this part of the paper
Answer:
oK so pay pattention to the fractions
Explanation:
Which of the following examples best illustrates an effect of pollution on an ecosystem?
Choose 1 answer:
Choose 1 answer:
(Choice A)
A
Cutting down a forest for lumber removes available habitat for local animals, forcing them to move or compete for remaining resources.
(Choice B)
B
The number of wolves in an area declines due to urbanization and hunting, allowing elk and deer populations to grow rapidly.
(Choice C)
C
Nitrogen and phosphorus runoff from agricultural fields creates harmful algal blooms and dead zones in the ocean.
Be + Cl₃N -----> Cl₂ + Be₃N₂ *
Answer:
3Be + 2NCl₃ ⟶ 3Cl₂ + Be₃N₂
-TheUnknownScientist
Three categories of factors that cause illness or injury are shown here. Match each example on the right to its correct match on the
left.
A baby is born with an abnormal number of chromosomes.
Angela was badly injured in a car accident after her air bag
exploded.
Alex forgot to get a flu shot and missed two weeks of school
with the flu. Answer choices pathogenic agents, genes , environmental factors
Answer:
Alex forgot to get a flu shot and missed two weeks of school
electronic configurations and charges of the ions
in lithium fluoride?
Answer:
Explanation:
The electronic configuration of a lithium atom is 2.1 and that of a fluorine atom is 2.7
an atom of lithium donates an electron to an atom of fluorine to form an ionic compound. The transfer of the electron gives the lithium ion a net charge of +1, and the fluorine ion a net charge of -1.
Iron is the most commonly used metal iron is extracted in a blast fumace from iron
oxide using carbon monoxide.
Fe:03
Fe 300
A sample of the ore haematite contains 70% iron oxide.
Calculate the amount of iron oxide in 2000 tonnes of haematite.
tonnes
Amount of iron oxide =
Answer:
70/100 X 2000 = 1400 tonnes of iron.
Explanation:
take the percentage of iron oxide and divide with overall amount of iron oxide using 2000 tonnes of hematite ore. 1400 tonnes of iron will be produced. this is not the percentage. if you want the percentage of iron produced just divide.
70/100 x 200 = 1400 tonnes of iron
percentage of iron produced = 70/1400 x 100 = 5 % of iron produced from 70% of iron oxide in 2000 tones of hematite ore
When an object is pushed by a force and moves in the direction of the force, work is done on the object. The amount of work equals the force times the distance (W = Fd). A small particle is pushed by a force of 2.6 × 10-4 newtons over a distance of 3.7 × 10-3 meters. How much work was done on the particle? Express the answer to the correct number of significant figures and in proper scientific notation. The force did × 10 newton-meters of work on the particle.
Explanation:
[tex]workdone = force \times distance \\ W = (2.6 \times {10}^{ - 4} ) \times (3.7 \times {10}^{ - 3} ) \\ W = 9.62 \times {10}^{ - 7} \: joules[/tex]
The formula W = Fd, where W is the amount of work done, F is the force, and d is the distance, is used to determine how much work is done on a particle when it is pushed by a force. The force and distance in this issue are 2.6 10-4 newtons and 3.7 10-3 metres, respectively.
What is the way to calculate the work done ?We add the force and distance together to determine the work done: 9.62 10-7 newton-meters are equal to W = 2.6 10-4 newtons x 3.7 10-3 metres. The response must be presented using the appropriate scientific notation and significant numbers.
The solution should include three significant figures, just like the numbers in the problem, which have three. Therefore, 9.62 10-7 newton-meters is the correct answer.
This response uses appropriate scientific language.notation because the exponent is a negative power of 10 and the coefficient ranges from 1 to 10. In conclusion, the particle underwent work from the force of 9.62 10-7 newton-meters. This response uses the appropriate scientific notation and the correct number of significant digits.
Learn more about force at:
https://brainly.com/question/13191643
#SPJ3
What is the molarity of a 0.4 liter solution containing 1.6 moles of NaCl?
Answer:
4 M
Explanation:
Molarity refers to the molar concentration of a substance (solution). It can be calculated by using the formula below:
Molarity (M) = number of moles (n) ÷ volume (V)
According to the information provided in this question;
V = 0.4 liter
n = 1.6 moles
Molarity = n/V
Molarity = 1.6/0.4
Molarity = 4 M
Why were scientists unsure about the last common ancestor between apes and humans?
Answer:
Scientists were unsure about the last common ancestor between apes and humans because fossils are so scarce, researchers do not know what the last common ancestors of living apes and humans looked like or where they originated.
Explanation:
Escribe la configuración electrónica de los elementos que poseen, ¿de qué elementos se trata?: 15 electrones 27 electrones 56 electrones 49 electrones
Answer:
15 electrones: 1S²2S²2P⁶3S²3P³. Fósforo
27 electrones: 1S²2S²2P⁶3S²3P⁶4S²3d⁷ - Cobalto.
56 electrones: 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p⁶5s²4d¹⁰5p⁶6s² - Bario
49 electrones: 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p⁶5s²4d¹⁰5p¹ - Indio
Explanation:
Para llenar los orbitales electrónicos de los distintos átomos debemos hacer uso de la regla de llenado electrónico de Aufbau. Por ejemplo, para el átomo con 15 electrones, la configuración electrónica es:
1S²2S²2P⁶3S²3P³. 2+2+6+2+3 = 15 electrones
Si elemento es neutro, tiene 15 protones. Es decir, es el fósforo, P.
27 electrones:
1S²2S²2P⁶3S²3P⁶4S²3d⁷ - Cobalto.
56 electrones:
1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p⁶5s²4d¹⁰5p⁶6s² - Bario
49 electrones:
1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p⁶5s²4d¹⁰5p¹ - Indio
Which physical property causes cork to float on top of water?
The temperature of a gas is decreased. What effect does this
have on the speed of the particles?
o The particles speed up.
o The particles slow down.
o The particles are destroyed.
The temperature has no effect on the speed of the
particles.
Explanation:
The temperature has no effect on the speed of the
particles.
How many moles of NH3 can be made from 0.93 moles N2?
0.62 mol NH3
1.86 mol NH3
0.93 mol NH3
0.47 mol NH3
The Soil conservation method in which mountain slope is cut into step is..
Answer:
Terracing.
Explanation:
Soil formation occurs as a result of the the decay or the remains of plants and animals which are used up.
Weathering can be defined as the physical and chemical breakdown of rock into smaller pieces called sediment. Weathering can be classified into two categories namely;
I. Physical weathering : it is the process of breaking rocks into pieces without affecting its chemical composition e.g temperature, abrasion and frost action.
II. Chemical weathering : it is the process of breaking rocks into pieces by chemical action which leads to changes in its chemical composition e.g carbonation, hydration, plant acid and oxidation.
Soil conservation can be defined as the use of various techniques so as to prevent the loss of the top most later of the soil and protecting it from degradation. Thus, the fertility of the soil is maintained.
The soil conservation method in which mountain slope is cut into step is terracing.
Answer:
Terracing
Explanation:
The Soil conservation method in which mountain slope is cut into step is Terracing.
help please, thank you:)
Answer:
1.67 × 10⁻¹⁰m is the answer.
Explanation:
Given,
4 × 10⁻⁷m thick
2400 atoms thick
therefore 1 atom,
Diameter = 4 × 10⁻⁷/2400
d = 4000 × 10⁻¹⁰/2400
d = 1.67 × 10⁻¹⁰m
∴ diameter of 1 gold atom (3 significant figures) = 1.67 × 10⁻¹⁰m
A 2.50 L balloon is filled with water at 2.27 atm. If the balloon is squeezed into a 0.80 L beaker and does NOT burst, what is the pressure of water in the balloon?
Answer:
[tex]P_2=7.09atm[/tex]
Explanation:
Hello!
In this case, given the change in volume and pressure of the gas, it is possible for us to recall the Boyle's law as way to understand the inversely proportional relationship between pressure and volume:
[tex]P_1V_1=P_2V_2[/tex]
Thus, when solving for the final pressure, P2, given the initial pressure and volume and the final volume, we obtain:
[tex]P_2=\frac{P_1V_1}{V_2}\\\\P_2=\frac{2.27atm*2.50L}{0.80L}\\\\P_2=7.09atm[/tex]
Best regards!
Answer:
7.1 atm
Using Boyle’s law, P1 V1=P2 V2.
Li2O + MgCl2 → 2 LiCl + MgO
What type of reaction is going on in this equation.
Answer:
water
Explanation:
The oxidation of an unsaturated fatty acid leads to the production of fewer ATPs than a saturated fatty acid with the same number of carbons because ____ A) the oxidation of the fatty acid stops when it reaches the double bond B) unsaturated fatty acids cannot be metabolized C) the double bond results in the bypassing of the first oxidation step of the pathway, thereby eliminating one FADH2 product
Answer:
C) the double bond results in the bypassing of the first oxidation step of the pathway, thereby eliminating one FADH2 product
Explanation:
The beta oxidation of fatty acids is the process by which long chain saturated and unsaturated fatty acids are oxidized to the two-carbon product, acetylCoA.
The beta oxudation of fatty acids occurs in four steps after which the chain length is shortened by 2 with cleavage of an acetylCoA molecule.
The first step involves the oxidation of the fatty acid with introduction of a double bond between C-2 and C-3 of the long carbon chain. This reaction produces FADH2 which donates its electrons to electron carriers in the electron transport chain tomproduce 1.5 moles of ATP. This is the case with saturated fatty acids.
However, in unsaturated fatty acids (which are less reduced than saturated fatty acids) where there is already a double bond innthe molecule, the double bond results in the bypassing of the first oxidation step of the pathway, thereby eliminating one FADH2 product.
This causes a reduction In the number of ATP produced by unsaturated fatty acids when compared to saturated fatty acids.
what is freezing point non-examples?
A surfact that DOES NOT allow water to pass through.
Answer:
impermeable
Explanation:
Answer:
aquifer?
Explanation:
What volume will 2.0 moles of nitrogen occupy at 0.947 atm and 20.0 °C?
Answer:
V = 50.77 L
Explanation:
Given that,
No. of moles, n = 2
Pressure, P = 0.947 atm
Temperature, T = 20°C = 293 K
We need to find the volume occupies by Nitrogen gas. Using gas law,
[tex]PV=nRT\\\\V=\dfrac{nRT}{P}[/tex]
Where
R is gas constant
Put all the values,
[tex]V=\dfrac{2\times 0.08205\times 293}{0.947}\\\\V=50.77\ L[/tex]
So, the volume occupied by the gas is equal to 50.77 L.
help me with my bell work
Answer:
1) It gets slower the farther out they are.
2) The farther out you are from the sun the less gravitational pull you have, which makes it go slower as it orbits.
3) Gravity ;) :)
Explanation:
Hope this helps! Plz mark as brainliest! :)
1.) The four inner planets have slower orbits and the four outer planets have faster orbits.
2.) The closer a planet is to the Sun, the stronger the Sun's gravitational pull on it, and the faster the planet moves.
3.) Gravity
The pH of a solution is 2.55. What is the [H3O+]?
Answer:
[H₃O⁺] ≈ 0.00282 M
General Formulas and Concepts:
Acid/Base Equilibria
Bronsted Acid/Bronsted Base
pH Formula: pH = -log[H₃O⁺]
[H₃O⁺] Formula: [tex]\displaystyle [H_3O^+] = 10^{-pH}[/tex]
Explanation:
Step 1: Define
pH = 2.55 (Acidic)
Step 2: Solve
Substitute in pH [Molar Concentration Formula]: [tex]\displaystyle [H_3O^+] = 10^{-2.55}[/tex]Evaluate exponent: [tex]\displaystyle [H_3O^+] = 0.002818[/tex]Step 3: Check
Follow sig fig rules and round. We are given 3 sig figs.
0.002818 M ≈ 0.00282 M