a sample of mg(hco3)2 contains 1.8 moles of oxygen atom find the number of carbon atoms in the given sample


please solve fast very much urgent​

We are given:

Initial Temperature = 90°c

Final Temperature = 120°c

Heat applied(ΔH) = 500 Joules

Specific heat(c) = 0.9 Joules / g°C

Mass of Aluminium(m) = ?

Change in temperature:

ΔT = Final temp. - Inital Temp.

ΔT = 120 - 90

ΔT = 30°c

Calculating the mass:

We know the formula:

ΔH = mcΔT

replacing the values:

500 = m(0.9)(30)

500 = m(27)

m = 500/27

m = 18.52 grams

Answer:

7.3125grams

Explanation:

Molarity is the measure of the molar concentration of a solution. It can be calculated using the formula as follows:

Molarity = number of moles (n) ÷ volume (V)

Based on the information given,

Molarity = 1.25 M

Volume = 100 mL = 100/1000 = 0.1 L

Molarity = n/V

1.25 = n/0.1

n = 1.25 × 0.1

n = 0.125mol

Using the below formula to calculate the mass of NaCl;

mole = mass/molar mass

Molar mass of NaCl = 23 + 35.5 = 58.5g/mol

0.125 = mass/58.5

mass = 0.125 × 58.5

mass = 7.3125 grams

Answer:

Kind of like DNA or a part of DNA

Explanation:

They are what make you a person, no they aren't the same

Solution :

a). [tex]$SO_3$[/tex]

  This compound is known as sulfur trioxide.

  The molecular shape of sulfur trioxide is trigonal planer.

   And the bond angle is 120°.

b). [tex]$N_2O$[/tex]

   This compound is known as Nitrous oxide. Here, nitrogen is in the center.     There is no lone pair around the nitrogen atom and it forms two sigma bonds with the other two atoms.

 It is linear in shape.

  The bond angle between them is 180°.

c). [tex]$CH_2Cl_{2}$[/tex]

  This compound is known as the Dichloromethane.

   The molecular shape of the compound is tetrahedral.

   The bond angles is 120°

Answer:

S = 21.92 %

F = 78.08 %

Explanation:

To find the percent composition of each element in SF6, we must find the molar mass of SF6 first.

Molar mass of SF6 = 32 + 19(6)

= 32 + 114

= 146g/mol

mass of Sulphur (S) in SF6 = 32g

mass of Fluorine (F) in SF6 = 114g

Percent composition = mass of element/molar mass of compound × 100

- % composition of S = 32/146 × 100 = 21.92%.

- % composition of F = 114/146 × 100 = 78.08%.

Answer:

Explanation:

The reaction is given as:

[tex]N_{2(g)} + 3H_{2(g)} \to 2NH_{3(g)}[/tex]

The reaction quotient is:

[tex]Q_C = \dfrac{[NH_3]^2}{[N_2][H_2]^3}[/tex]

From the given information:

TO find each entity in the reaction quotient, we have:

[tex][NH_3] = \dfrac{6.42 \times 10^{-4}}{3.5}\\ \\ NH_3 = 1.834 \times 10^{-4}[/tex]

[tex][N_2] = \dfrac{0.024 }{3.5}[/tex]

[tex][N_2] = 0.006857[/tex]

[tex][H_2] =\dfrac{3.21 \times 10^{-2}}{3.5}[/tex]

[tex][H_2] = 9.17 \times 10^{-3}[/tex]

∴

[tex]Q_c= \dfrac{(1.834 \times 10^{-4})^2}{(0.0711)\times (9.17\times 10^{-3})^3} \\ \\ Q_c = 0.6135[/tex]

However; given that:

[tex]K_c = 1.2[/tex]

By relating [tex]Q_c \ \ and \ \ K_c[/tex], we will realize that [tex]Q_c \ \ < \ \ K_c[/tex]

The reaction is said that it is not at equilibrium and for it to be at equilibrium, then the reaction needs to proceed in the forward direction.

Answer:

1.0 mole

Explanation:

From the question given above, the following data were obtained:

Volume (V) = 5 L

Temperature (T) = 205 K

Pressure (P) = 340 KPa

Gas constant (R) = 8.31 KPa.L/Kmol

Number of mole (n) =?

Using the ideal gas equation, the number of mole of the gas in the container can be obtained as follow:

PV = nRT

340 × 5 = n × 8.31 × 205

1700 = n × 1703.55

Divide both side by 1703.55

n = 1700 / 1703.55

n = 1.0 mole

Thus, the number of mole of the gas in the container is 1.0 mole

Answer:

its called molding

Explanation:

Answer:

[Kr] 4d4 5s1

Explanation:

Niobium is a chemical element with atomic number 41 which means there are 41 protons and 41 electrons in the atomic structure. The chemical symbol for Niobium is Nb. Neutron Number and Mass Number of Niobium Mass numbers of typical isotopes of Niobium are 93.

Name of Element : Niobium

Atomic Weight : 92.9

Atomic Number : 41

Group : Transition Elements

Electron Configuration: 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s2 4d3

Answer:

1) 1.5 kg

2) 0.6 kg

Explanation:

[tex](3)(30) = 60m, m = 90/60 = 1.5[/tex] kg

[tex](0.8)(15) = 20m, m = 12/20 = 0.6[/tex] kg

Answer:

K2S(aq) + BaCl2(aq) = 2KCl(aq) + BaS(s)

In the image attached, it is explained how the solution is balanced.

The number of atoms of any element in the given chemical formula is the number that is written on the foot of the symbol of that element. The   balanced equation is

K[tex]_2[/tex]S(aq) + BaCl[tex]_2[/tex](aq)[tex]\rightarrow[/tex]2KCl(aq) + BaS(s)

Balanced equation is the one in which the total number of atoms of a species on reactant side is equal to the total number of atoms on product side.

The unbalanced equation is

K[tex]_2[/tex]S(aq) + BaCl[tex]_2[/tex](aq) [tex]\rightarrow[/tex]KCl(aq) + BaS(s)

The number of atoms of K on reactant side is 2 while on product side it is 1, so to balance K we need to multiply KCl by 2

K[tex]_2[/tex]S(aq) + BaCl[tex]_2[/tex](aq) [tex]\rightarrow[/tex]2KCl(aq) + BaS(s)

The atoms of sulfur on reactant and product side is 1, so it is balanced.

The atoms of Ba on reactant and product side is 1, so it is balanced.

The atoms of Cl on reactant and product side is 2, so it is balanced.

Therefore the balanced equation is

K[tex]_2[/tex]S(aq) + BaCl[tex]_2[/tex](aq)[tex]\rightarrow[/tex]2KCl(aq) + BaS(s)

Learn more about the balanced equation, here:

https://brainly.com/question/7181548

#SPJ2

Answer:

See Explanation

Explanation:

We can write the molecular orbital configuration of molecules in the same way as we write the orbital electron configuration of atoms. The valence electrons in the molecule are filled into molecular orbitals of appropriate energy in accordance to the Aufbau principle.

For CO;

σ2s2, σ*2s2, Π2py2, Π2pz2, σ2px2

For NO;

σ2s2, σ*2s2, Π2px2, Π2py2, σ2pz2, Π*2px1

For CN-;

σ2s2, σ*2s2, Π2px2, Π2py2, σ2pz2

These are the ground state electron configurations of these molecules.

Answer:

is has around 1/5 lyrics of water

Answer:

[tex]1 \: mole \: = \: 6.02 \times {10}^{23} \: molecules \\ 0.350 \: moles \: = \: (0.350 \times 6.02 \times {10}^{23} ) \: molecules \\ = 2.107 \times {10}^{23} \: molecules[/tex]

Answer: 6.04 g

Explanation: In STP conditions, amoint of substance

n = V / Vm = 4.23 l / 22.41 l/mol = 0.188755 mol

Molar mass M(O2) = 32 g/mol  and

mass m = nM

Answer:

Substances over 7 are categorized as basic, with 7 being the neutral point. Water has a pH level of 7. Substances with pH levels under 7 are categorized as acidic. Vinegar is acidic.

Explanation:

You can change it a little if you want. Hope this helps!

Vinegar is acidic. The only vinegar that has alkaline is apple cider vinegar, but all types of vinegar are acidic.

Answer:

x² = mutiphy by them self

Explanation:

Answer:

Ksp = [Ca⁺²] × [C₂O₄⁻²]

Explanation:

Step 1: Write the balanced reaction for the dissociation of calcium oxalate

CaC₂O₄(s) ⇄ Ca⁺²(aq) + C₂O₄⁻²(aq)

Step 2: Write the expression for the solubility product constant (Ksp) of calcium oxalate

The solubility product constant is the equilibrium constant for the dissociation reaction, that is, it is equal to the product of the concentrations of the products raised to their stoichiometric coefficients divided by the product of the concentrations of the reactants raised to their stoichiometric coefficients. It doesn't include solids nor pure liquids because their activities are 1.

Ksp = [Ca⁺²] × [C₂O₄⁻²]

Answer:

Mg + 2 HCl ⇒ MgCl₂ + H₂

10.1 L

Explanation:

Step 1: Write the balanced equation

Mg + 2 HCl ⇒ MgCl₂ + H₂

Step 2: Calculate the moles corresponding to 10.0 g of Mg

The molar mass of Mg is 24.31 g/mol.

10.0 g × 1 mol/24.31 g = 0.411 mol

Step 3: Calculate the moles of H₂ produced from 0.411 moles of Mg

The molar ratio of Mg to H₂ is 1:1. The moles of H₂ produced are 1/1 × 0.411 mol = 0.411 mol

Step 4: Calculate the volume occupied by 0.411 moles of H₂

0.411 moles of H₂ are at 1.00 atm and 25 °C (298 K). We can calculate the volume occupied using the ideal gas equation.

P × V = n × R × T

V = n × R × T / P

V = 0.411 mol × (0.0821 atm.L/mol.K) × 298 K / 1.00 atm = 10.1 L

Answer:

1 - Salts required  that can be compared directly, using Ksp values, to estimate solubilities for copper (II) sulfide are - [tex]CaSO_3[/tex] (Option b) ,[tex]BaCrO_4[/tex] (Option c) and [tex]CaS[/tex] (Option d)

2 - Salts  that can be compared directly, using Ksp values, to estimate solubilities for zinc hydroxide are - [tex]Mg(OH)_2[/tex] (Option a)

Explanation:

[tex]K_s_p[/tex] values can be used to compare the solubility of salts that produce ions in a 1:1 ratio.

Because the salts [tex]CaSO_3[/tex] , [tex]BaCrO_4[/tex] and [tex]CaS[/tex]  have a 1:1 ion ratio, the solubilities of options b, c, and d can be compared to salt 1.

[tex]K_s_p[/tex] Values can be used to compare the solubility of salts that produce ions in a 1:2 or 2:1 ratio.

  2. [tex]Zn(OH)_2[/tex] dissociates into ions in ratio 1:2 .

Because the ions in the salt [tex]Mg(OH)_2[/tex] are in a 1:2 ratio, the solubility of salt 2 can be compared to that of salt 'a'.

Hence , Salt 1 is matched with options b , c , d.

              Salt 2 is matched with option a.

Answer:

B

Explanation:

When two distinct elements are chemically combined—i.e., chemical bonds form between their atoms—the result is called a chemical compound. Most elements on Earth bond with other elements to form chemical compounds, such as sodium (Na) and Chloride (Cl), which combine to form table salt (NaCl).

MARK AS BRAINLEST!!

Answer:

Precipitation reactions are ones in which at least one of the reactants is in the aqueous phase (i.e., dissolved in water), and a solid forms on the product side which was not present on the reactant side. If all the reactants are solid, then a solid product forming should not be called a precipitate. To be called a precipitate, an insoluble product must form from within solution, either from a solid and solute interacting, or from an interaction strictly between solutes.

Explanation:

We have that the statement that explains why NaCl dissolves in water even though the process is endothermic the given as,

Option A

Generally ,Sodium chloride  is crystalline salt, when  its dissolved is H20 , it dissociates its ion, the ions are scattered through out the solution which results in increased  in randomness .

Therefore, the entropy increases when NaCl dissolves in water,

Option A

For more information on Heat visit

https://brainly.com/question/15267055

Answer:

A person's skin color, hair color, dimples, freckles, and blood type are all examples of genetic variations that can occur in a human population.

Explanation:

Answer:

The reaction will proceed to the right to attain the equilibrium.

Explanation:

Step 1: Write the balanced equation

2 N₂(g) + 3 H₂(g) = 2 NH₃(g)

Step 2: Calculate the reaction quotient

The reaction quotient (Qc) is calculated in the same way as the equilibrium constant (Kc) but it uses the concentrations at any time.

Qc = [NH₃]² / [N₂]² × [H₂]³

Qc = 8.00² / 1.50² × 1.00³ = 28.4

Since Qc ≠ Kc, the reaction is not at equilibrium.

Since Qc < Kc, the reaction will proceed to the right to attain the equilibrium.

Answer:

Mg

Explanation:

I think Mg is correct not too sure tho

Answer:  Okay so i don't know how i can explain this but.. OK so Steven placed an ice cream scoop right? and put it under hot water so i would say it would make the ice cream scoop hot? and then using it to scoop the ice cream i could say it would be a melting affection i think

Explanation:

im am so sorry pls forgive me is i am wrong i tried my best so at least give me a like for effort.. i hope u have a great day :)

Answer:

Bathypelagic

54% of the ocean lies in the Bathypelagic (aphotic) zone into which no light penetrates. This is also called the midnight zone and the deep ocean. Due to the complete lack of sunlight, photosynthesis cannot occur and the only light source is bioluminescence.

Explanation:

The small surface zone that has light is the photic zone. The entire rest of the ocean does not have light and is the aphotic zone.

Permanent darkness below 1000 meters with bioluminescent bacteria, bottom feeders, and angler fish is where no light reaches.

This is referred to the state of being dark as a result of absence of light in the area.

The light ray penetration decreases with increase in depth thereby making areas below 1000 meters dark with bioluminescent bacteria, bottom feeders, and angler fish which is why option C was chosen.

Read more about Darkness here https://brainly.com/question/24581271

Explanation:

E=(98-15)×400×4.2

E=139440J

t=E/P

E=139440/500=278.88s

hope it helps❣️

don't forget to mark me as brainliest and follow❣️