its volume this is the answer because the mercury will turn into gas. gas has more volume because it takes up more space as it spreads.
Answer: It’s Volume
Explanation:
4. Which of the following statements correctly describe atoms? Select all that apply.
A)Atoms have mass,
B)Atoms are the basic unit of a chemical element.
C)Matter is made of atoms.
D)Atoms take up space.
Answer:
all of the above
Explanation:
adams take up space they take up mass they are the basic chemical unit and matter is made of adams
Answer:
All of them except "Elements are the basic unit of atoms."
Explanation:
I took the quiz :D
Who is correct? Reggie, because baking and melting cause bonds to be broken, leading to a chemical change. Reggie, because objects that are heated always undergo chemical changes. Charlotte, because melting objects only sometimes cause a chemical change. Charlotte, because baking causes a chemical change, but melting objects is a non-chemical change.
Answer: Charlotte, because baking causes a chemical change, but melting objects is a non-chemical change.
Explanation: Baking is a chemical change you cant turn it back to what it was before. Its chemical properties have changed. Melting is a physical change. Its chemical properties are still the same it has not changed. It just changed it's physical form but the object is still the object.
Answer:
Charlotte, because baking causes a chemical change, but melting objects is a non-chemical change.
Explanation:
took the quiz on edge
Consider the following reversible reaction.
Answer:
B is the correct option
Explanation:
K= the ratio of product of concentration of products to the product of concentration of reactants raised to power equal to their cofficients.
Answer:
aaaaa
Explanation:aaaaaaa
What is an alloy? A. A substitution of one metal for another metal B. A metal with a changed oxidation state C. A combination of metal with another element D. A layering of one metal over another metal
The correct answer is the combination of a metal with another element.
An alloy is a combination of two or more metallic elements to make a stronger material. For instance, there are bronze alloys, brass alloys, and coin alloys.
We can confirm that an alloy is a combination of one metal with another metal because stainless steel is made of an iron and chromium alloy (iron is a metal; chromium is also a metal). Therefore, we can confirm that option C is the best choice.
Which of the following is an accurate description of an ionic bond? Anions and anions attract. Cations and cations attract. Cations and anions attract. Atoms share electrons.
Answer:
Atoms of different elements, having gained or lost electrons, form negative and positive ions that are bonded together by attractive forces between ions with opposite charges.
Explanation:
The atoms have different numbers of neutrons and the same number of protons. hope this helps you :)
1. Convert 0.00006125 to scientific notation
Answer:
6.125 × 10^-5
Explanation:
You have to move the decimal place 5 times to the right. Remember in scientific notation the first number, (the number that comes before the 10) has to be between 1.0 and 9.99...
Which type of reaction involves the release of energy into the surroundings? Options: endothermic reactions
exothermic reactions
Answer:
exothermic reaction
Explanation:
The definition of exothermic is:
describing a process that involves the release of energy into the surroundings by substances undergoing change.
Think of ex-othermic as energy exiting/ released and en-dothermic as energy entering.
Answer: it’s endothermic
Explanation:
What is a base?
A. A substance that contributes chloride ions to the solution
B. A substance that increases the concentration of oxygen in
solution
C. A substance that increases the concentration of OH ions in
solution
D
O D. A substance that increases the concentration of H+ ions when
dissolved
de semana
Answer:
The subsrance that increases OH ion concentration.
Explanation:
Elastic energy is stored when an object is stretched. Is this an example
of potential or kinetic energy?
A. Neither
B. Both
d
C. Kinetic
O
D. Potential
Reset Selection
Answer:
D: potential
Explanation:
You have left the carton of milk out of the refrigerator overnight and it has
spoiled. This is an example of a
A. Physical property
O
B. Physical change
OC. Chemical property
D. Chemical change
Reset Selection
Answer:
D: chemical change
Explanation:
Phosphorus has three electrons in its 3p sublevel and sulfur has four.
Phosphorus should have the lower ionization energy but it does not,
sulfur does. What does this provide evidence for?
A. Aufbau's principle
B. Conservation of energy
C. Hund' rule
D. None of these
Reset Selection
Answer:
The correct answer is C. Hund's rule.
Hund's rule states that for atoms in their ground state, electrons will occupy orbitals of the same energy level one by one before pairing up. This means that when filling the 3p sublevel, phosphorus should have one electron in each of the three 3p orbitals before any of them start pairing up.
However, in reality, sulfur has a lower ionization energy than phosphorus. This means that it is easier to remove an electron from sulfur than from phosphorus. This contradicts the expectation based on Hund's rule.
Therefore, the fact that sulfur has a lower ionization energy than phosphorus provides evidence that Hund's rule is not the only factor governing the electron configuration and ionization energies of elements. Other factors, such as electron-electron repulsion and the stability of half-filled or filled subshells, also play a role.
What is the correct answers
Answer:
B, C, D
Explanation:
Polyatomic ions are ions that have more than 1 atom.
An oil tanker spills a large amount of oil near the ocean shoreline. Which application of chemistry would best solve this problem?
What kind of solution would have a Ky value that is much less than 12
A. A strongly basic solution
B. A weakly acidic solution
C. A strongly acidic solution
D. A weakly basic solution
Answer:
The answer is option D.
A weakly basic solution
Hope this helps.
Answer:
Explanation: Apex a weakly acidic solution
The empirical formula is:
A. the actual number of atoms of each element in a molecule.
B. representation of a compound that shows how its atoms are arranged.
C. All of these
D. the relative number of atoms of each element, using the lowest whole ratio.
Reset Selection
Answer:
option c the relative number of atoms of each element using the lowest ratio because empirical formula gives the simplest-whole number ration of each element
e.g. the empirical formula of benzeneC6H6 in CH
Explanation:
I HOPE IT WILL HELP YOU
9. Let's say, you need to make 2.00 L of 0.05 M copper (II) nitrate solution. How many grams of
copper (II) nitrate will you require?
Answer:
18.76 g of copper II nitrate
Explanation:
Now recall that we must use the formula;
n= CV
Where;
n= number of moles of copper II nitrate solid
C= concentration of copper II nitrate solution
V= volume of copper II nitrate solution
Note that;
n= m/M
Where;
m= mass of solid copper II nitrate
M= molar mass of copper II nitrate
Thus;
m/M= CV
C= 0.05 M
V= 2.00 L
M= 187.56 g/mol
m= the unknown
Substituting values;
m/ 187.56 g/mol = 0.05 M × 2.00 L
m= 0.05 M × 2.00 L × 187.56 g/mol
m= 18.76 g of copper II nitrate
Therefore, 18.76 g of copper II nitrate is required to make 0.05 M solution of copper II nitrate in 2.00 L volume.
Which of the following inter-particle forces has the lowest potential energy?
A. ion-ion interaction
b. hydrogen bonding
c. dipole-dipole interaction
d. ion-dipole moment
Answer:
b. hydrogen bonding.
Explanation:
Hope it helps.
which diagram(s) represents the bonding pattern of metals? a)A and B
b)C and D
c)A
d)C
the other guy is totally wrong. the answer is a for sure. C is showing a covalent bond between 3 atoms. Metals bond differently. Like shown in a and b. However b is innacurate because it shows the electrons being the largest(since they are negatively charged and there is a - sybmol), and we all know protons are much larger than electrons. SO a is correct because it depicts the positive protons(+ symbol) as the biggest. So go with a.
What is the result of increasing the temperature of a gas? A. The number of molecules will increase. B. The molecules will slow down. C. The volume of the gas will decrease. D. The kinetic energy will increase
Answer:
D. The kinetic energy will increase
Explanation:
Answer:
Hello
I think the third one is correct.
Explanation:
Because when we increase the temperature of a gas the increasing give energy to gas molecules.
Good luck.
8. What is an energy level?
A)The region outside the nucleus where the neutron is likely to be moving.
B)The region outside the nucleus where the electron is likely to be moving.
C)The region outside the nucleus where the proton is likely to be moving.
D)The region inside the nucleus where the electrons are located.
Answer:
B. The region outside a nucleus where the electron is moving
Explanation:
The more the electron moves, the higher energy level it has, the slower the electron moves the lowwer energy level it has.
Answer:
Energy levels (also called electron shells) are fixed distances from the nucleus of an atom where electrons may be found. Electrons are tiny, negatively charged particles in an atom that move around the positive nucleus at the center. Energy levels are a little like the steps of a staircase. You can stand on one step or another but not in between the steps. The same goes for electrons. They can occupy one energy level or another but not the space between energy levels.
:D
Initial temperature of metal =
С
Initial temperature of water =
°C
Final temperature of both =
Answer:
52.0 °C
Explanation:
41. Which pair of compounds could combine to produce an ester?
I. CH3- CH2 - CH2 - CH3
II. CH3- CH2 - CH2-CH2-OH
III. CH3- CH2 - CH2-COOH
IV. CH3- CH2- CH2- COH
a. I and II
b. II and III
c. II and IV
d. III and IV
Answer: b. ii and iii
Explanation:
The ester, Butyl Butanoate is formed when Butanol reacts with Butanoic acid
as seen below;
CH3-CH2-CH2-CH2-OH + CH3-CH2-CH2-COOH ---->
Butanol Butanoic acid
CH3-CH2-CH2-COOCH2-CH2-CH2-CH3 + H2O
Butyl Butanoate Water
Which describes a climate effect on the rate of weathering? Cold climates favor mechanical weathering. Chemical reactions occur slower at higher temperatures. Lower precipitation levels lead to more chemical reactions. The chemical reaction rates of minerals are not impacted by temperature.
Answer:
the answer is Cold climates favor mechanical weathering.
Explanation:
I got 100% on the Quiz
Statement that describes climate effect on the rate of weathering as regards this question is A:Cold climates favor mechanical weathering.
Weathering can be regarded as disaggregation of rocks into smaller bits by the actions of agents of weathering such as man, animals, water and so on.However, climate can also have effect on the rate of weathering, when there is cold climate, mechanical weathering is favoured.Option B,C,D are wrong because high temperature brings about increase in rate of chemical weathering.
Therefore, option A is correct.
Learn more at:
https://brainly.com/question/21251700?referrer=searchResults
what causes the difference genetically identical organisms
Answer:
the epigenetic perspective. ... Such variation among organisms with virtually identical chromosomal DNA sequences has largely been attributed to the effects of environment.Explanation:
Once an action plan is in place, it should not be changed.
Please select the best answer from the choices provided.
ОТ
OF
Answer:
F = False
Explanation:
An action plan is a plan that an individual or a firm creates, that contains their objectives, aims, strategies , which they require to achieve their specific goals.
An action plan is very detailed, streamlined and straight to the point. It contains a series or a number of steps or tasks that an individual must embark on in other to achieve their end goal.
WHEN AN ACTION PLAN AS BEEN PUT IN PLACE OR SET IN MOTION, IT CAN BE CHANGED OR ALTERED. This is because the aim of a action plan is to achieve the end goal of an individual or a firm. As long as the changes made in the action plan does not hinder the achievement of those goals then the action plan can be changed.
Some of the very common reasons why action plans are changed or modified includes:
a) To make the action plan more flexible.
b) To track and monitor your progress in achieving your end goal. If there is a delay, you can easily track it out on your action plan and modify it.
In other to create an action plan, it is very important that the goals of such that individual or firm is very well defined and clear from the beginning. Action plans must always be monitored, and updated regularly.
Answer:
F, false
Explanation:
i took the quiz on edge
The diagram below shows the different phase transitions that occur in matter. Three bars are shown labeled Solid, Liquid, and Gas. They are connected by arrows labeled 1 to 6. Arrow 1 points from liquid to gas; arrow 2 from solid to liquid, arrow 3 from solid to gas, arrow 4 from gas to liquid, arrow 5 from liquid to solid, and arrow 6 from gas to solid. Which statement best describes the process that arrow 1 represents? Molecules are speeding up as boiling occurs. Molecules are slowing to a stop while freezing. Molecules are slowing down during condensation. Molecules are vibrating in stationary positions.
Answer:
Molecules are speeding up as boiling occurs.
Explanation:
We have three states of matter;solid liquid and gas. Substances are found in these different states of matter according to the degree of energy and velocity of its particles. Highly energetic particles moving at high velocities are found in the gaseous state. Less energetic particles moving at lesser velocities due to intermolecular forces are found in the liquid state while particles with the least degree of freedom are found in the solid state. Solid particles do not translate but can vibrate or rotate about a fixed position.
When a liquid boils, particles at the surface of the liquid acquire sufficient energy and escape the surface of the liquid. This is because, as energy is supplied in the form of heat during boiling, molecules acquire sufficient energy to speed up their molecular motion and escape the liquid surface as vapour.
Molecules are speeding up as boiling occurs is the statement that best describes the process of arrow 1.
Evaporation is a physical process in which matter transforms from a liquid state to a gaseous state. Generally this process occurs when matter is exposed to high amounts of energy.
When a material is exposed to energy, its particles begin to move and speed up until they break their bonds and are released in the form of gas.
Learn more in: https://brainly.com/question/9402776
5. Which type of substances do you separate into lons when writing the complete lonic equation?
Answer:
As a general rule, soluble ionic compounds, strong acids, and strong bases should be written as dissociated ions in the complete ionic equation. Insoluble salts and weak acids are written using the neutral molecular formula since they only dissociate to a very small extent in water.
Explanation:
Which of the following is a strong acid?
A. HF (Hydrofluoric acid)
B. NH3 (Ammonia)
C. NaOH (Sodium hydroxide)
D. HCI (Hydrochloric acid)
Answer:
D. HCI (Hydrochloric acid)
Explanation:
correct me if im wrong but im pretty sure thats the answer
Which of these is an example of an engineering solution?
O
A. Studying the diets of people with autoimmune diseases.
B. Creating a biodegradable trash bag.
C. Figuring out how long it takes plastic to degrade in a landfill.
D. Studying new species of insects in the Costa Rican jungles.
ASAP!!!
Answer:
B. Creating a biodegradable trash bag.
Explanation:
Engineering is generally defined as the use of scientific principles to design or build structures such as buildings, bridges and vehicles.
Engineering is the application of science or math to solve our daily life problems. So, creating a biodegradable trash bag is an example of an engineering solution which solve the environmental-related issues.
Hence, the correct option is B.
If “light A” has a longer wavelength than "light B”, then “light A” has
“light B”.
Answer: light A has less energy than light B
Explanation: The longer wavelength the less energy. The shorter wavelength the more energy.