(a) Cycle consists of an adiabatic expansion (1-2), (b) 20.8 J/molK (c) -3.20×10³ J (d) 4900 J.
Describe Thermodynamics?Thermodynamics is a branch of physics that deals with the relationships between heat, work, and energy in systems that undergo changes in temperature, pressure, and other variables. The subject has its roots in the study of heat engines and the optimization of their performance, but it has since grown to encompass a wide range of phenomena, including chemical reactions, phase transitions, and the behavior of materials under extreme conditions.
(a) The cycle consists of an adiabatic expansion (1-2), an isothermal compression (2-3), and an isobaric compression (3-1).
(b) Since the adiabatic expansion is reversible and adiabatic, we can use the relation:
Cv = (γ / (γ-1)) R
where γ = Cp / Cv is the ratio of specific heats, R is the gas constant, and Cv is the molar heat capacity at constant volume. We know that the gas obeys the ideal gas law, so we can use PV = nRT to find the initial number of moles n, and then use the work done during the adiabatic expansion to find γ:
γ = 1 + (Cp / Cv) = 1 + (2/3) = 5/3
Then, we can find Cv:
Cv = (γ / (γ-1)) R = (5/3) * (8.31 J/molK) / (2/3) = 20.8 J/molK
(c) The work done by the gas in the isothermal step (2-3) is:
W23 = -nRT ln(V3/V2)
where V2 = 10 L, V3 = 2 L, and T = 202 K. We can use the ideal gas law to find the final number of moles n:
n = PV / RT = (4.00×10⁵ Pa) * (2.00×10⁻³ m³) / (8.31 J/mol*K * 320.0 K) = 3.08 mol
Then, we can find the work done:
W23 = -nRT ln(V3/V2) = -(3.08 mol) * (8.31 J/mol*K) * (202 K) * ln(2/10) = 1730 J
The work done by the gas in the isobaric step (3-1) is:
W31 = -PΔV = -(4.00×10⁵ Pa) * (10.0×10⁻³ m³ - 2.00×10⁻³ m³) = -3.20×10³ J
(d) The change in internal energy of the gas in each step can be found using the first law of thermodynamics:
ΔU = Q - W
where Q is the heat absorbed by the gas and W is the work done by the gas.
For the adiabatic step (1-2), we have ΔU12 = -W12 = -1030 J, since Q12 = 0.
For the isothermal step (2-3), we have ΔU23 = 0, since the temperature is constant and therefore there is no change in internal energy.
For the isobaric step (3-1), we have ΔU31 = Q31 - W31. Since the process is isobaric, the heat absorbed by the gas is simply the product of the pressure, volume change, and molar heat capacity at constant pressure Cp:
Q31 = nCpΔT = nCvΔT + nRΔT = (3.08 mol) * (20.8 J/molK) * (320.0 - 202.0) K + (3.08 mol) * (8.31 J/molK) * (320.0 - 202.0) K = 4900 J
To know more about pressure visit:
https://brainly.com/question/24215146
#SPJ1
explain HOW heat conduction works if you pour a hot cup of hot chocolate into a cold cup. What happens to the cup and HOW does it happen?
With time, the hot chocolate's thermal energy will permeate into the atmosphere, causing the cup to chill.
How does the heat energy from a cup of hot chocolate get to you?Conduction, which transfers heat through direct touch, transports heat from the hot chocolate to the mug. As the molecules of the hot chocolate clash with those of the mug, energy is transferred to both of them as well as to the surrounding air.
How is the spoon made heated by the heat from a cup of hot chocolate?Conduction into the metal spoon will speed up the transfer of heat from the cocoa. The heat will be dispersed throughout the spoon's body because it is a thermal conductor.
To know more about energy visit:-
https://brainly.com/question/1932868
#SPJ1
On the water surface, there are two sources of oscillating waves of the same phase located at A and B, emitting two coherent waves of wavelength λ. Let Δ be the line perpendicular to AB at B. On Δ there are 16 interference maxima, the distance between the two closest and farthest interference maxima is 2.71 cm and 229.55 cm, respectively. . Which of the following is the length of line segment AB closest to?
Two or greater sources are said to be coherent if they emit waves that have the identical wavelength (or frequency) and amplitude and which maintain a steady phase difference.
Do two coherent sources have equal wavelength?If two sources have the identical wavelength, frequency, and segment difference, they are said to be coherent. Therefore, we can conclude that coherent sources have the identical wavelength.
Two microwave coherent factor sources emitting waves of wavelenths λare positioned at 5λdistance apart. The interference is being observed on a flat non-reflecting surface alongside a line passing through on sources ,in a course perpendicular to the line joining the two sources
Learn more about coherent waves here:
https://brainly.com/question/12495315#SPJ1What is the real reason the skies blue
Answer:
Rayleigh scattering
Explanation:
The blue color of the sky is due to a phenomenon called Rayleigh scattering. When sunlight enters the Earth's atmosphere, the shorter blue wavelengths of light are scattered more than the other colors by the tiny molecules of nitrogen and oxygen in the air. This causes the blue light to be redirected in many different directions, making the sky appear blue to our eyes. The other colors of light are scattered as well, but to a lesser extent, which is why the sky appears blue instead of a mixture of all colors. This effect is also the reason why the sun appears more yellow, orange or red during sunrise or sunset, when its light has to travel through more of the Earth's atmosphere before reaching our eyes, causing the shorter blue wavelengths to be scattered even more, leaving behind the longer wavelengths of light.
A .35 kg block at -27.5 ºC is added to .217 kg of water at 25.0 ºC. They come to equilibrium at 16.4 ºC. What is the specific heat of the block?
Answer:
✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿
To solve this problem, we can use the formula for heat transfer:
q = mcΔT
where q is the heat transferred, m is the mass of the object, c is its specific heat capacity, and ΔT is the change in temperature.
We know that the mass of the block is 0.35 kg and that its initial temperature is -27.5 ºC. We also know that the mass of water is 0.217 kg and that its initial temperature is 25.0 ºC.
When they come to equilibrium at 16.4 ºC, we can calculate how much heat was transferred from the water to the block:
q = mcΔT q = (0.217 kg)(4186 J/kg ºC)(25.0 ºC - 16.4 ºC) q = 1825 J
This amount of heat was transferred from the water to the block, so we can set it equal to the amount of heat absorbed by the block:
q = mcΔT 1825 J = (0.35 kg)c(16.4 ºC - (-27.5 ºC)) 1825 J = (0.35 kg)c(43.9 ºC) c = 148 J/kg ºC
Therefore, the specific heat capacity of the block is 148 J/kg ºC.
Explanation:
(´▽`ʃ♡ƪ)
✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿
please help me in this exercise in physics. pls
Answer:
Explanation:
a. Work is done when the direction of the force and the distance is parallel, that is in the same direction. So, the distance here has both a horizontal and vertical component. This is because when a plane takes off, it doesn't just shoot upward, but move along the surface and increase its height from the ground.
So now, we know that the direction of the force upward (since it's a thrust). That's why work is done only when you take the vertical component of your direction(distance). Because force and distance must be parallel.
b. Yes. Kinetic energy(K.E) is directly proportional to velocity(speed). [tex]K.E = \frac{1 }{2} mv^{2}[/tex]
And velocity changes from take off to landing. So there is a change in kinetic energy.
c. Gravitational potential energy(GPE) is directly proportional to height. So when height increases, it will increase too. After take off, there will be an increase of height.
[tex]GPE = mgh[/tex]
d. Mechanical energy is the sum of potential and kinetic energy. As both K.E and GPE change when the values of velocity and height respectively varies, so will the mechanical energy.
Answer: a
Explanation:
Harmonic Motion Basics
10. Calculate the period of a pendulum that has a length of 68 cm.
The period of the pendulum with a length of 68 cm is 1.65 seconds.
What is period of the pendulum?
The period of a pendulum is the time taken for one complete back-and-forth swing or oscillation. It is the time taken for the pendulum to move from its highest point (the point of maximum displacement) to its lowest point and back again to the highest point. The period of a pendulum depends on its length and the acceleration due to gravity.
The period of a pendulum can be calculated using the formula:
T = 2π√(L/g)
where T is the period, L is the length of the pendulum, and g is the acceleration due to gravity (approximately 9.81 m/s²).
Converting the length of the pendulum to meters:
L = 68 cm = 0.68 m
Substituting the values into the formula:
T = 2π√(0.68 m / 9.81 m/s²)
Simplifying:
T = 2π√(0.0694 s²)
Calculating the square root:
T = 2π x 0.263 s
Simplifying:
T = 1.65 s
Therefore, the period of the pendulum with a length of 68 cm is 1.65 seconds.
What is an acceleration of the pendulum?
An acceleration of a pendulum refers to the rate at which its velocity changes as it swings back and forth. The acceleration of a pendulum is not constant but rather varies as the pendulum swings, with the greatest acceleration occurring at the endpoints of its swing, where it changes direction.The acceleration of a pendulum is directly proportional to the displacement of the pendulum from its equilibrium position.
To know more about pendulum, visit:
https://brainly.com/question/29596867
#SPJ9
Complete question is: The period of the pendulum with a length of 68 cm is 1.65 seconds.
a wave has a frequency of 40 hertz and a wavelength of 2 meters . what is the wave speed ?
Answer:
[tex]80\; {\rm m\cdot s^{-1}}[/tex].
Explanation:
The frequency [tex]f[/tex] of a wave is the number of cycles completed in unit time ([tex]1\; {\rm s}[/tex] in this example.) In this question, [tex]f = 40\; {\rm s^{-1}}[/tex] ([tex]1\; {\rm Hz} = 1\; {\rm s^{-1}}[/tex]) means that the wave would complete [tex]40[/tex] cycles in every [tex]1\; {\rm s}[/tex].
The wavelength [tex]\lambda[/tex] of a wave is the distance the wave travels in each cycle. It is given that [tex]\lambda = 2\; {\rm m}[/tex].
The goal is to find the wave speed, which is the distance that this wave travels in unit time ([tex]1\; {\rm s}[/tex].)
In this question, it is given that [tex]\lambda = 2\; {\rm m}[/tex] and [tex]f = 40\; {\rm s^{-1}}[/tex]. Thus, this wave would travel a total of [tex]40\, (2\; {\rm m}) = 80\; {\rm m}[/tex] for the [tex]40[/tex] cycles completed in each unit time of [tex]1\; {\rm s}[/tex] ([tex]\lambda = 2\; {\rm m}[/tex] for each cycle.) The speed of this wave would be [tex]80\; {\rm m\cdot s^{-1}}[/tex].
Formally, the speed [tex]v[/tex] of this wave can be found by multiplying the wavelength [tex]\lambda[/tex] of this wave by its frequency [tex]f[/tex]:
[tex]\begin{aligned}v &= \lambda\, f \\ &= (2\; {\rm m})\, (40\; {\rm s^{-1}) \\ &= 80\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].
80 POINTS!!!!!!!!! NO BOTS UR OWN ANSWER!
The speed of water waves decreases as the water becomes shallower. Suppose waves travel across the surface of a lake with a speed of 2.0 m/s and a wavelength of 1.9 m When these waves move into a shallower part of the lake, their speed decreases to 1.7 m/s , though their frequency remains the same.
Find the wavelength of the waves in the shallower water.
Express your answer to two significant figures and include the appropriate uni
The wavelength of the waves in the shallower water, given that their frequency remains the same is 1.5 m
How do i determine the wavelength of the waves?First, we shall determine the frequency of the waves. details below:
Speed of waves in lake (v) = 2.0 m/sWavelength of waves in lake (λ) = 1.9 mFrequency of waves (f) =?Velocity (v) = wavelength (λ) × frequency (f)
2 = 1.9 × frequency
Divide both sides by 1.9
Frequency = 2 / 1.9
Frequency = 1.1 Hertz
Finally, we shall determine the wavelength of the waves in the shallower water. Details below:
Speed of wave in shallower water (v) of = 1.7 m/sFrequency of waves (f) = 1.1 HzWavelength in shallower water (λ) = ?Velocity (v) = wavelength (λ) × frequency (f)
1.7 = wavelength × 1.1
Divide both sides by 1.1
Wavelength = 1.7 / 1.1
Wavelength in shallower water = 1.5 m
Learn more about wavelength:
https://brainly.com/question/30859618
#SPJ1
A Carnot Engine operates between two heat reservoirs. The cold reservoir is maintained at 20.0 °C. What temperature must the hot reservoir be at in order for the efficiency of the engine to be 20.0 %?
A heat engine with a 65.0% Carnot efficiency is currently being developed. Between a reservoir that is 25.00C and one that is 3750C, a heat engine is operational.
What is the formula for Carnot efficiency ?The equation is: Carnot efficiency is equal to 1 - Tc/Th, wherein Tc is the cycle's cold end temperature and Th is its hot end temperature. In other words, efficiency is equal to one minus the difference between the hot and cold temperatures.
Explanation: The cold reservoir's temperature is TL=20C=20+273=293K. T L = 20 ∘ C = 20 + 273 = 293 K .
A Carnot cycle running between both of these two reservoirs has a thermal efficiency of = 1 TC/TH. This value exceeds the value of the Otto cycle, which is operating between similar reservoirs by a large margin.
Two know more about efficiency visit:
https://brainly.com/question/13021831
#SPJ1
2 energy 2) Place the following energy types in the order that BEST represents the energy conversion in a coal-burning power station. 1. Electrical energy 2. Kinetic energy 3. Chemical energy 4. Thermal energy
The order that BEST represents energy conversion in a coal-burning power station is: Chemical energy, Thermal energy, Kinetic energy, Electrical energy.
What is the energy conversion in a coal-burning power station?Energy conversion process in a coal-burning power station can be summarized as follows:
Chemical energy stored in coal is converted into thermal energy through combustion (burning) of coal.
Thermal energy produced by burning the coal is used to heat water and produce steam in boiler.
Steam produced by the boiler flows through turbine, which converts the thermal energy of steam into kinetic energy, causing turbine to rotate.
Rotation of the turbine generates electrical energy through the use of generator, which converts kinetic energy of the rotating turbine into electrical energy.
Electrical energy generated by the generator is then sent to power grid and distributed to homes, businesses, and other customers.
To know more about energy, refer
https://brainly.com/question/13881533
#SPJ1
30 POINTS!!!! NO CHATGPT OR ANY BOTS_
As you sit in a fishing boat, you notice that 12 waves pass the boat every 45 s
. If the distance from one crest to the next is 9.0 m
, what is the speed of these waves?
Express your answer to two significant figures and include the appropriate units.
The speed of the waves can be expressed to two significant figures as 0.2 m/s. The unit for this expression is meters per second (m/s).
What is wave crest?A wave crest is the highest point of a wave. It is the top of the wave, where the wave is moving most up and away from the equilibrium position. It is the point of highest amplitude (height) of the wave and is followed by a wave trough, which is the lowest point of the wave.
The speed of the waves can be calculated using the formula speed = distance over time.
We know the distance between wave crests is 9.0 m and the time it takes for 12 waves to pass the boat is 45 s. Therefore, the speed of the waves can be calculated as:
Speed = 9.0 m / 45 s
Speed = 0.2 m/s
The speed of the waves can be expressed to two significant figures as 0.2 m/s. The unit for this expression is meters per second (m/s).
This calculation shows that the speed of the waves passing the boat is 0.2 m/s. This speed can be further broken down into how many meters the waves travel in one second if necessary.
For more questions related to speed
https://brainly.com/question/13943409
#SPJ1
Can anyone please help me
To solve this problem, we can use Coulomb's law, which states that the electric force between two point charges is proportional to the product of their charges and inversely proportional to the square of the distance between them.
We can then use the electric force to find the electric field at the location of q3 and the initial acceleration of q3.
a) To find the electric field at the location of q3, we can first find the electric force on q3 due to q1 and q2 and then use the definition of the electric field, which is the electric force per unit charge. The electric force on q³ due to q¹ and q² is:
F1 = k x q¹ x q³/ r1²
F2 = k x q² x q³ / r2²
where r¹ and r² are the distances from q¹ and q² to q³, respectively, and k is Coulomb's constant.
Since q³ is equidistant from q¹ and q², we have r¹ = r² = 0.20 m. Substituting the given values, we get:
F1 = (9.0 x 10⁹ N-m²/C²) x (4.0 x 10⁻⁶ C) x (2.0 x 10⁻⁶C) / (0.20 m)² = 1.8 N
F2 = (9.0 x 10⁹ N-m⁻²/C²) x (-6.0 x 10⁻⁶ C) x (2.0 x 10⁻⁶C) / (0.20 m)² = -5.4 N
The negative sign of F2 indicates that the force on q³ due to q² is in the opposite direction to the force due to q¹.
The net electric force on q3 is the vector sum of the forces due to q1 and q2:
Fnet = F1 + F2 = 1.8 N - 5.4 N = -3.6 N
The electric field at the location of q³ is then:
E = Fnet / q³ = (-3.6 N) / (2.0 x 10⁻⁶ C) = -1.8 x 10⁻⁶N/C
The negative sign of the electric field indicates that the field is directed towards q².
b) To find the initial acceleration of q³, we can use Newton's second law, which states that the net force on an object is equal to its mass times its acceleration:
Fnet = ma
where m is the mass of q³ and a is its initial acceleration.
Substituting the given values, we get:
-3.6 N = (2.0 x 10⁻⁶ kg) x a
Solving for a, we get:
a = -1.8 x 10³ m/s²
The negative sign of the acceleration indicates that it is directed towards q².
c) The direction of the initial acceleration of q³ is towards q².
To know more about acceleration, visit:
https://brainly.com/question/12550364
#SPJ1
A jar of tea is placed in sunlight until it reaches an equilibrium temperature of 30.7 ◦C.
In an attempt to cool the liquid, which has a mass of 188 g , 129 g of ice at 0.0 ◦C is added. At the time at which the temperature of the tea is 26.6 ◦C , find the mass of the remaining ice in the jar. The specific heat of water is 4186 J/kg◦ C . Assume the specific heat capacity of the tea to be that of pure liquid water. Answer in units of g.
The mass of the remaining ice in the jar is 188 g.
What is Equilibrium?
Equilibrium refers to a state of balance or stability where opposing forces or factors are balanced, resulting in a state of overall stability and no net change. In various contexts, equilibrium can have different meanings and applications.
We can rearrange the equations to solve for the mass of ice remaining (mice):
Qtea = Qice
mtea * ctea * ΔT = mice * cice * ΔT
mice = (mtea * ctea * ΔT) / (cice * ΔT)
Plugging in the given values:
mtea = 188 g
ctea = 4186 J/kg◦ C (specific heat capacity of water)
ΔT = 30.7 - 26.6 = 4.1 ◦C (change in temperature of the tea)
cice = 4186 J/kg◦ C (specific heat capacity of ice)
mice = (188 * 4186 * 4.1) / (4186 * 4.1)
mice = 188 g
Learn more about Equilibrium from the given link
https://brainly.com/question/517289
#SPJ1
How long does it take for radiation from a cesuim-133 atom to complete 1.5 million cycles
A cesium-133 atom's radiation goes through 1.5 million cycles in around 0.1633 microseconds (or 163.3 nanoseconds).
What frequency does one kind of radiation that cesium-133 emits have?9,192,631,770 hertz (cycles per second) is the frequency of the microwave spectral line that the isotope cesium-133 emits. The basic unit of time is provided by this. Cesium clocks have an accuracy and stability of 1 second in 1.4 million years.
The radiation emitted by cesium-133 has a frequency of 9,192,631,770 cycles per second, or 9.192631770 109 Hz.
The following formula may be used to determine how long 1.5 million radiation cycles take to complete:
Time is equal to the frequency of cycles.
Plugging in the numbers, we get:
time = 1.5 million / 9.192631770 × 10^9 Hz
time = 1.632995101 × 10^-7 seconds
So it takes approximately 0.1633 microseconds (or 163.3 nanoseconds) for radiation from a cesium-133 atom to complete 1.5 million cycles.
To know more about cesium-133 visit:-
https://brainly.com/question/4830355
#SPJ1
A ball thrown straight upward returns to its original level in 2.75 seconds. A second ball is thrown at an angle of 40 degrees above the horizontal. What is the initial speed ball if it also returns to its original level in 2.75 seconds?
The initial speed (magnitude of velocity) of the second ball thrown at an angle of 40 degrees above the horizontal is approximately 12.93 m/s.
What is the initial speed ball?Let's consider the motion of the second ball thrown at an angle of 40 degrees above the horizontal. We can break down its motion into horizontal and vertical components.
Given:
Time taken for the ball to return to its original level (time of flight): t = 2.75 seconds
Angle of projection (above the horizontal): θ = 40 degrees
We can use the following equations of motion to find the initial speed (magnitude of velocity) of the ball:
Horizontal motion:
The horizontal velocity of the ball remains constant throughout the motion, and can be given as:
vx = v0 * cos(θ), where v0 is the initial speed.
Vertical motion:
The vertical velocity of the ball changes due to the force of gravity. We can use the following equation:
vy = v0 * sin(θ) - g * t,
where;
g is the acceleration due to gravitySince the ball returns to its original level, the vertical displacement (change in height) is zero:
Δy = 0
We can use the following equation to relate the initial speed, time of flight, and angle of projection:
Δy = v0 * sin(θ) * t - (1/2) * g * t^2 = 0
Plugging in the values and solving for v0:
0 = v0 * sin(40) * 2.75 - (1/2) * 9.8 * (2.75)^2
v0 * sin(40) * 2.75 = (1/2) * 9.8 * (2.75)^2
v0 = (1/2) * 9.8 * (2.75)^2 / (sin(40) * 2.75)
v0 = 12.93 m/s (rounded to two decimal places)
Learn more about initial velocity here: https://brainly.com/question/19365526
#SPJ1
If the speed of a wave is 400 cm/s with a frequency of 80 Hz, what is the wavelength for this wave?
32,000 cm
32,000 m
5 cm
5m
The nearest neighboring star to the Sun is about 4 light-years away. If a planet happened to be orbiting this star at an orbital radius equal to that of the Earth-Sun distance, what minimum diameter would an Earth-based telescope's aperture have to be in order to obtain an image that resolved this star-planet system? Assume the light emitted by the star and planet has a wavelength of 550 nm
. The Earth-Sun distance is 149.6×106km
, and 1ly=9.461×1015m
.
To resolve the star-planet system at a distance of 4 light-years, a telescope on Earth would need an aperture with a minimum diameter of 55.88 mm.
What does microscopy's Rayleigh criterion mean?In optical microscopy, the Rayleigh criterion is frequently used to estimate the resolution of the microscope. The resolution limit imposed by this criterion has long been regarded as a roadblock to using an optical microscope to study biological phenomena at the nanoscale.
We can use the Rayleigh criterion,
θ = 1.22 λ / D
θ = angular resolution
λ = wavelength of light
D = diameter of the telescope's aperture
θ = arctan (r / d)
r = radius of the planet's orbit
d = distance to the star
Now, we use the given values,
r = 149.6×106 km = 149.6×109 m
d = 4 × 9.461×1015 m = 3.7844×1016 m
λ = 550 nm = 550×10-9 m
θ = arctan (r / d)
=arctan (149.6×109 / 3.7844×1016) = 0.000012 radians
we can use the Rayleigh criterion,
θ = 1.22 λ / D
D = 1.22 λ / θ
D = 1.22 × 550×10-9 / 0.000012
D = 55.88 mm
To know more about the Rayleigh criterion visit:
https://brainly.com/question/19953205
#SPJ1
A model rocket blast off and moves upward with an acceleration of 12m/s2 until it reaches a height of 26m, at which point its engine shuts off and it continues its flight in free fall.
a) What is the maximum height attained by the rocket?
b) What is the speed of the rocket just before it hits the ground?
c) What is the total duration of the rocket's flight?
Unit 2 Test Study Guide (Electricity and Magnetism)
1. How does distance affect gravitational force between 2 objects?
2. How does mass affect gravitational force between 2 objects?
3. Draw a bar magnet with the magnetic field lines and be able to identify a diagram of this.
4. What are the parts of an electromagnet?
5. What is a solenoid?
6. What are 2 ways to strengthen an electromagnet?
7. What happens to the magnetic force in an electromagnet if the electricity is turned off?
8. How could you test the strength of an electromagnet?
9. Besides the amount of mass an electromagnet produces, what else could you use to measure the strength? (Think about the 2 factors affecting magnetic force between objects).
10. What is electromagnetic induction?
11. Moving a permanent magnet through a coil of wire attached to a circuit produces what?
12. What do ammeters and galvanometers do?
13. What mechanism do they use for this?
14. What is the role/purpose of the generator in a hydroelectric power plant (or any power plant)?
15. What are the energy conversions in an electric generator?
16. What happens when electric current
flows into a simple electric motor?
17. What are the energy conversions in an electric motor?
18. Would an electromagnet or an electric motor include a spinning magnet?
19. What energy source produces light in a flashlight you have to crank?
20. What device uses a rotating coil of wire in a magnetic field to produce motion?
21. What device increases or decreases electrical energy?
1. The gravitational force between two objects decreases as the distance between them increases.
What is gravitational?Gravitational force is the attraction between two objects that is produced by their masses.
2. The gravitational force between two objects increases as the mass of one of the objects increases.
3. A bar magnet with magnetic field lines looks like a line of arrows pointing from the North Pole to the South Pole.
4. The parts of an electromagnet are the core, the coil, and the electricity.
5. A solenoid is a coil of wire wrapped around a core, usually made of iron, that produces a magnetic field when electricity is passed through it.
6. Two ways to strengthen an electromagnet are to increase the number of coils in the solenoid and to increase the strength of the electric current.
7. When the electricity is turned off, the magnetic force in an electromagnet decreases.
8. To test the strength of an electromagnet, you can measure the amount of mass it produces when it is turned on.
9. Besides the amount of mass an electromagnet produces, you can also measure the strength by measuring the current and number of turns in the coil.
10. Electromagnetic induction is the production of an electric current when a magnetic field is changed.
11. When a permanent magnet is moved through a coil of wire attached to a circuit, it produces an electric current.
12. Ammeters and galvanometers measure electric current in a circuit.
13. They use the principle of electromagnetic induction to measure the electric current in a circuit.
14. The generator in a hydroelectric power plant (or any power plant) is used to convert mechanical energy from the turbine into electrical energy.
15. In an electric generator, mechanical energy is converted into electrical energy through electromagnetic induction.
16. When electric current flows into a simple electric motor, it causes a spinning magnet to move and generate motion.
17. In an electric motor, electrical energy is converted into mechanical energy through electromagnetic induction.
18. An electromagnet does not include a spinning magnet, while an electric motor does.
19. The energy source that produces light in a flashlight you have to crank is mechanical energy.
20. The device that uses a rotating coil of wire in a magnetic field to produce motion is an electric motor.
21. A transformer is a device that increases or decreases electrical energy.
To learn more about gravitational
https://brainly.com/question/27943482
#SPJ1
A 25 kg child plays on a swing having support ropes that are 2.20 m long. A friend pulls her back until the ropes are ăÿÿfrom the vertical and releases her from rest. (a) What is the potential energy for the child just as she is released compared with the potential energy at the bottom of the swing? (b) How fast will she be moving at the bottom of the swing? (c) How much work does the tension in the ropes do as the child swings from the initial position to the bottom?
Answer:
A) P.E = 138.44 J
B) The velocity of swing at bottom, v = 3.33 m/s
C) The work done, W = -138.44 J
Explanation:
Given,
The mass of the child, m = 25 Kg
The length of the swing rope, L = 2.2 m
The angle of the swing to the vertical position, ∅ = 42°
A) The potential energy at the initial position ∅ = 42° is given by the relation
P.E = mgh joule
Considering h = 0 for the vertical position
The h at ∅ = 42° is h = L (1 - cos∅)
P.E = mgL (1 - cos∅)
Substituting the given values in the above equation
P.E = 25 x 9.8 x 2.2 (1 - cos42°)
= 138.44 J
The potential energy for the child just as she is released, compared to the potential energy at the bottom of the swing is, P.E = 138.44 J
B) The velocity of the swing at the bottom.
At bottom of the swing the P.E is completely transformed into the K.E
∴ K.E = P.E
1/2 mv² = 138.44
1/2 x 25 x v² 138.44
v² = 11.0752
v = 3.33 m/s
The velocity of the swing at the bottom is, v = 3.33 m/s
C) The work done by the tension in the rope from initial position to the bottom
Tension on string, T = Force acting on the swing, F
=
= - 2.2 x 25 x 9.8 [cos0 - cos 42°]
= - 138.44 J
The negative sign in the in energy is that the work done is towards the gravitational force of attraction.
The work done by the tension in the ropes as the child swings from the initial position to the bottom of the swing, W = - 138.44 J
The ------------------ is one of Earth's mechanical layers. It consists of a shallow upper layer of Earth's mantle.
A.core
B.mantle
C.crust
D.asthenosphere
E.lithosphere
D. asthenosphere.The asthenosphere is a layer of the Earth's mantle that lies just below the lithosphere Earth's outermost layer and extends down to a depth of about 660 kilometers.
What is Earth ?Earth is the third planet from the Sun and is the only known planet in the universe to support life. It is a terrestrial planet, meaning it is primarily composed of rock or metal, and has a thin atmosphere that supports life by providing oxygen, protecting against harmful radiation.
What is oxygen ?It is a highly reactive nonmetal and an oxidizing agent that readily forms compounds with most other elements, as well as with other compounds. Oxygen is the third most abundant element in the universe, after hydrogen and helium, and makes up about 21% of the Earth's atmosphere by volume. It is essential for life on Earth, as it is used by living organisms during the process of respiration to convert food into energy. Oxygen also plays an important role in many other chemical and biological processes.
To know more about Earth visit :
https://brainly.com/question/31064851
#SPJ1
A ball is traveling at a constant speed of 4 m/s in a circle with a radius of 0.8 m. What is the centripetal acceleration of the ball?
According to the question the centripetal acceleration of the ball is 20 m/s².
What is centripetal acceleration?Centripetal acceleration is the acceleration that a body experiences when it is moving in a curved path. It is always directed towards the center of the curve, and its magnitude is equal to the square of the body's velocity divided by the radius of the curve. It is also known as the radial acceleration, since it is directed along the radius of the curve.
The centripetal acceleration of an object in a circular path is given by the equation:
[tex]a_c[/tex] = v²/r
where a_c is the centripetal acceleration, v is the speed of the object, and r is the radius of the circular path.
In this case, the speed of the ball is 4 m/s, and the radius of the circular path is 0.8 m. Plugging these values into the equation, we get:
[tex]a_c[/tex] = 4²/0.8 = 16/0.8 = 20 m/s²
Therefore, the centripetal acceleration of the ball is 20 m/s².
To learn more about centripetal acceleration
https://brainly.com/question/22103069
#SPJ1
Within the living area of the colony, what atmospheric gases must be present on Venus?
Humans would need a breathable environment like that on Earth in the living section of a colony on Venus in order to survive. Nitrogen, oxygen, and trace amounts of other gases, such as carbon dioxide, make up the majority of the atmosphere on Earth.
What gases are present in Venus' atmosphere?The clouds are made of sulfuric acid, and the atmosphere is primarily carbon dioxide, the same gas that causes the greenhouse effect on Venus and Earth. And the heated, high-pressure carbon dioxide acts corrosively at the surface.
What gases are found in Mars' and Venus' atmospheres?For instance, compared to Earth, which has 99% nitrogen and oxygen in its atmosphere, Venus and Mars both contain more than 98% carbon dioxide and nitrogen.
To know more about atmosphere visit:-
https://brainly.com/question/885615
#SPJ1
Which are different forms of an element that have different numbers of neutrons?
ions
isotopes
compounds
molecules
.
.
Answer:A
Explanation:
Isotopes are members of a family of an element that all have the same number of protons but different numbers of neutrons. The number of protons in a nucleus determines the element's atomic number on the Periodic Table.
A 2,900-kg truck runs into the rear of a 1,000-kg car that was stationary. The truck and car are locked together after the collision and move with speed 8 m/s. Compute how much kinetic energy was "lost" in this inelastic collision.
A 1,000-kg automobile that was stopped Collision with a 9,100-kg truck's back. Following the incident, the truck the car are stuck together and moving at a speed of 8 m/s.
How improbable is a collision on reality?
In the real world, energy changes almost always occur, making this highly implausible. In the actual world, collisions typically take this form. Flying balls or a spaceship passing close to a planet without being impacted by its gravity are two examples of this.
What distinguishes a collision from an impact?
Impact can refer to a collision between two objects, at least half of which is being pushed in the direction of the other. Collision refers to the coming contact of more than one thing with enough force that either all of them sustain damage or that their movement is significantly slowed.
To know more about Collision visit:
https://brainly.com/question/30636941
#SPJ1
HELP ILL MARK BRIANLIEST
identify the independent variable
identify the dependent variable
Which statement best describes the relationship between the data (IV & DV)
Which statement best describes the relationship between the change in temperature data and the kinetic energy ?
1. The independent variable is the initial temperature of the water.
2. The dependent variable is the amount of ice in grams that melts.
3. The statement that best describes the relationship between the data (Independent Variable & Dependent Variable) is that as the initial temperature of the water increases, the amount of ice required to reach the final temperature generally decreases.
4. As the change in temperature increases (meaning a larger difference between the initial and final temperatures), the kinetic energy transfer from the water to the ice also increases. This is because the greater the temperature difference, the more energy is required to be transferred for the system to reach an equilibrium.
How do you identify the independent and dependent variables?You find the independent variable by looking at the factors being manipulated or changed during the experiment. In this case, the initial temperature of the water is the independent variable because it's the one being altered in each trial.
The other variables, such as the final temperature and the amount of ice, are affected by the changes in the initial temperature. As a general rule, the independent variable is the one that is deliberately changed to observe its effect on other variables (dependent variables) in the experiment
The above answer is based on the variables provided below as seen in the picture;
Temperature of water
170ml of water
Trials initial temperature Final temperature Amount of ice in grams
1. 18°C 12.3 °C 60.1g
2. 50.4 °C 46.6 °C 57.4g
3. 5.0 °C 0 °C 70.8g
4. 15.1 °C 4.3 °C 135g
Find more exercises on independent variable;
https://brainly.com/question/1479694
#SPJ1
A 27 g block of ice is cooled to −65 ◦C. It is added to 525 g of water in an 80 g copper calorimeter at a temperature of 25◦C. Find the final temperature. The specific
heat of copper is 387 J/kg ◦C and of ice is 2090 J/kg ◦C . The latent heat of fusion of
water is 3.33 × 105 J/kg and its specific heat is 4186 J/kg ◦C . Answer in units of ◦C.
The final temperature after adding the ice to the water and calorimeter will be approximately 8.37 ◦C.
What is Temperature?
Temperature is a measure of the average kinetic energy of the particles in a substance or system. It is a scalar quantity that indicates how hot or cold an object or medium is. Temperature is commonly measured using various scales, such as Celsius (°C), Fahrenheit (°F), and Kelvin (K), which represent different reference points and units of measurement.
Since energy is conserved, we can set Q_ice equal to Q_water+calorimeter:
m_ice * c_ice * ΔT_ice = (m_water + m_calorimeter) * c_water+calorimeter * ΔT_water+calorimeter
27 g * 2090 J/kg ◦C * (T_f + 65) = (525 g + 80 g) * (4186 J/kg ◦C + 387 J/kg ◦C) * (T_f - 25)
Simplifying and solving for T_f:
27 * 2090 * (T_f + 65) = 605 * (T_f - 25)
56130 T_f + 361350 = 605 T_f - 15125
56130 T_f - 605 T_f = -15125 - 361350
-44,970 T_f = -376475
T_f = (-376475) / (-44,970)
T_f ≈ 8.37 ◦C
Learn more about Temperature from the given link
https://brainly.com/question/26866637
#SPJ1
5. Two equal charges are situated in a vacuum 10.0cm apart, if they repel each other with a force of 0.5N, calculate the value of the charge on each. [4π)¹ = 9.0 x 10⁹ I
The value of the charge on each particle is [tex]1.05 x 10^-8 C[/tex].
What is Coulomb's law?Coulomb's law is a fundamental principle of electrostatics that describes the interaction between electric charges. It states that the force between two point charges is directly proportional to the product of their charges and inversely proportional to the square of the distance between them. We can use Coulomb's law to solve this problem. Mathematically,
[tex]F = k(q1q2)/r^2[/tex]
where F is the force of attraction or repulsion between the two charged particles,[tex]q1[/tex] and [tex]q2[/tex] are the magnitudes of the charges on the two particles, r is the distance between them, and k is Coulomb's constant, which has a value of [tex]9.0 x 10^9 Nm^2/C^2.[/tex]
In this problem, we know that the charges are equal and the distance between them is 10.0 cm. We also know that the force between them is 0.5 N. Therefore,
[tex]0.5 N = k(q^2)/(0.1 m)^2[/tex]
Solving for q, we get:
[tex]q = \sqrt{[(0.5 N)(0.1 m)^2/k]}[/tex]
[tex]q = \sqrt{(0.5 N)(0.01 m)/(9.0 x 10^9 Nm^2/C^2)}[/tex]
[tex]q = 1.05 x 10^-8 C[/tex]
Therefore, the value of the charge on each particle is [tex]1.05 x 10^-8 C.[/tex]
Learn more about electrostatics here:
https://brainly.com/question/31042490
#SPJ1
The average compensation for demale tennis players in $283,635, but the median compensation is much lower at around $76,000. Why are these numbers so different?
The difference in these numbers is likely due to the fact that there are a few very highly paid female tennis players who skew the average upwards.
What is average?Average is a term used to describe a value that is representative of a set of data. It is calculated by adding up all the values in a set and dividing by the number of values in the set. Average can be used to describe the mean, median, or mode of a set of data. It is often used to average out the highs and lows in a set of data, to give an overall picture of the data set. Average can also be used to compare different sets of data to each other.
The median, however, only takes into account the middle value of the data set, so it doesn't take into account outliers like the highly paid female tennis players. This is why the median is usually considered a better measure of central tendency than the average.
To learn more about average
https://brainly.com/question/24445340
#SPJ1
Cary calculated the surface area of a box in the shape of a rectangular prism. She wrote the equation 148 = 2 (6w + 6h + hw) to represent the width and height of the box. She solved for w and got w = StartFraction 74 minus 6 h Over h + 6 EndFraction Which of the following is an equivalent equation?
w = StartFraction 148 minus 6 h Over 12 + h EndFraction
w = StartFraction 148 minus 12 h Over 12 + 2 h EndFraction
w = 136 minus 14 h
w = 136 minus 10 h
The correct equivalent equation from the options provided is:
w = (24.67 - h) / (h + 6)
What is Equivalent Equation?
An equivalent equation is an equation that has the same solution or solutions as the original equation. In other words, if two equations produce the same values for the variables, they are considered equivalent equations.
The equivalent equation for w, based on the given equation and solving for w, is:
w = (148 - 6h) / (h + 6)
To simplify this equation, we can factor out 6 from the numerator:
w = 6(24.67 - h) / (h + 6)
Now we can further simplify by dividing both numerator and denominator by 6:
w = (24.67 - h) / (h + 6)
Learn more about Octane from the given link
https://brainly.com/question/28469125
#SPJ1