6.
A runner completed the 100.-meter dash in
10.0 seconds. Her average speed was
A) 10.0 m/s
B) 1,000 m/s
C) 0.100 m/s
D) 100 m/s
Answer:
A) 10.0 m/s
Explanation:
the formula for average speed is v=d/t
the distance is 100 meters
The time is 10.0 seconds
so v=100m/10.0s
= 10.0m/s
so the runners average speed was 10.0m/s
The average speed of the runner is equal to 10.0 m/s. Therefore, option (A) is correct.
What is speed?The speed of a body can be described as the distance covered in a definite time interval. The average speed can be defined as a scalar parameter as it possesses magnitude with no direction.
The speed can be determined from the ratio of the distance traveled by the object to the time taken to travel that distance.
The speed of any object can be calculated from the formula equation mentioned below:
Speed = total distance /time taken
Given, the distance covered by the runner = 100 m
The time taken by the runner, t = 10.0 s
The average speed of the runner can be calculated from the formula as shown below:
Speed = 100/10 = 10 m/s
Therefore, the average speed of the runner is 10.0 m/s.
Learn more about the speed, here:
brainly.com/question/12322912
#SPJ2
The force of water flowing over a dam spillway is to be measured in a geometrically similar small-scale laboratory model. The width of the prototype is 30 m and the width of the model is 2 m. If the force on the model spillway is measured to 10 kN, the expected force on the prototype spillway for dynamically similar conditions is:
Answer:
Jay shree krishna j to the same time kr rhe h u have UCC fm rob and studing a few minutes ago
Which is not part of a DC motor?
Answer:
The correct answer to the question will be compass i.e compass is not a part of a DC motor. Various parts of a DC motor are coil of wire, armature, field magnets, brushes and commutator. The coil of wire plays a vital role in DC motor.
Explanation:
Which of the moon's properties prevents it from being pulled inward by Earth?
O gravity
O inertia
O shape
O structure
Answer:
O inertia
Explanation:
The moon's property that prevents it from being pulled inward by the Earth is called it's inertia.
Every object in the universal space have gravitational force of attraction to one another due to their masses.
An inertia is the reluctant of a body to move or the tendency of it to remain in constant motion.
Inertia entails the property of objects to remain at rest or continue in uniform motion.
As the force of gravity acts between the earth and the moon, inertia keeps a body in constant position.
_H₂ + O₂- _ H₂O. how do you balance this equation
Answer:
first balance hydrogen.
Explanation:
2H2+O2---->2H2O
Answer:
2H^2 + 2H^2O
Explanation:
Put a 2 in front of both H's and the H's will be 4 and the O's will be 2. The chemical equation is balanced.
The largest planet in the solar system is Jupiter,with a diameter of 71,398 km. What is the diameter of Jupiter in centimeters?
Answer:7139800000
Explanation:
The largest planet in the solar system is Jupiter. Its equatorial diameter is approximately 143,000 kilometres (ca. 88,856 mi miles).
What diameter of Jupiter in centimetres?Jupiter is a gas giant because it consists largely of gas and liquid, as opposed to solid substance. With an equator diameter of 142,984 kilometres (88,846 mi), it is the solar system's biggest planet.
About 80% of Jupiter is hydrogen, and 20% is helium. Over a solid core, a thick layer of liquid hydrogen is covered by swirling gas. At 1,000 kilometres below the cloud layer's outer edge, there is a lot of pressure. The hydrogen gas changes into a liquid there.
Therefore, By squaring the scale factor for length, the scale factor for area may be calculated. Consequently, s2 is the scale factor for area. If the situation is the opposite, a solution to the issue under investigation is offered. The area scale factor is 2.
Learn more about Jupiter here:
https://brainly.com/question/20979520
#SPJ2
The average velocity of a tennis ball is measured during serving and found to be 216 km/hr.
Calculate the time elapsed between hitting the ball and meeting the ground if the distance covered by the ball during that interval is 20m
PLEASE ANSWER WITH EXPLANATION :)
Answer:
The time between hitting the ball and meeting the ground is [tex]t=0.33\: s[/tex]
Explanation:
We have a semi parabolic motion here. We know that the initial speed 216 km/h or 60 m/s in the x-direction.
So we can use the following equation:
[tex]v=\frac{\Delta x}{\Delta t}[/tex]
[tex]60=\frac{20}{t}[/tex]
[tex]t=\frac{20}{60}[/tex]
[tex]t=0.33\: s[/tex]
hope it helps you!
what is phyical quantity
Answer:
physical quantity
Explanation:
All quantity in term of which laws of physics are described and can be measured is called physical quantity
If the column of mercury in a barometer stands at 72.6 cm, what is the atmospheric pressure?
(The density of mercury is 13.6 X 103 kg/m3 and g = 9.80 m/s2)
Answer:pressure = density * acceleration due to gravity * height
H=72.6cm= 0.726m
P=0.726*13.6*10^3*9.8
P=96761.28Pa
Explanation:
The atmospheric pressure if the column of mercury in a barometer stands at 72.6 cm is 9.68 × 10⁴ Pa.
What is Pressure?The stress at a location within a confined fluid or the perpendicular force per unit area are the two definitions of pressure used in the physical sciences. A 42-pound box with an area of 84 square inches at the bottom will apply pressure on a surface equal to the force divided by the surface area.
Given:
The height in the barometer, h = 72.6 cm or 0.726 m,
The density of mercury, d = 13.6 × 10³ kg/m³,
The gravitational acceleration, g = 9.80 m/s²,
Calculate the atmospheric pressure by the following formula,
P = dgh
Here, P is the atmospheric pressure
Substitute the values,
P = 13.6 × 10³ × 9.80 × 0.726
P = 9.68 × 10⁴ Pa,
Therefore, the atmospheric pressure if the column of mercury in a barometer stands at 72.6 cm is 9.68 ×10⁴ Pa.
To know more about Pressure:
https://brainly.com/question/28343308
#SPJ2
What are the 4 basic skills of Badminton. Explain.
Answer:
As the service marks the start of every rally and subsequently dictates its flow, it is a crucial aspect of the game to get right in badminton.
These are the four main types of services in badminton and most can be executed with either your forehand or backhand.
1. Low serve
This low serve is almost a gentle tap over the net with the shuttle, with the aim of flying just over the net, yet falling just over the front line of his service court. It must not be too high or predictable, otherwise it would be easy for your opponent to do an outright smash or net kill.
2. High serve
The high serve is a powerful strike upwards with the shuttle, that aims to travel a great distance upwards and fall deep at the rear end of the court.
Although it is a strong serve and the popular choice of beginner players, its a serve that isn't so easy to disguise especially since you're using a forehand grip. Your opponent will already expect the shuttlecock to land at the back of the court.
Do remember that shuttlecocks have to fall within the corresponding service areas and this is different in singles and doubles.
3. Flick serve
This flick serve is also played upwards but at a much lesser altitude. It is most common for players to use their backhand to execute the flick serve and the trajectory is lower as this grip has less power.
The whole point of the backhand flick serve is deception, by mixing your serves up and making it look like you're doing a low serve. For this reason, serving with your backhand is thus very popular with competitive players.
It becomes hard for your opponent to predict if you are going to do a flick or a low serve as your stroke will look exactly the same until the point of contact.
4. Drive Serve
This is an attacking serve that is used by top badminton players like Lin Dan. The idea is to hit the shuttle directly at your opponent, limiting their return options and catching them off guard, winning you easy points. It's a good change of pace but it is also risky as if your opponent is prepared, he could just smash the shuttlecock back at you.
This serve is executed with your forehand through underarm action and following through. The shuttle should be dropped a bit sideways rather than in front of your body and hit flatter.
Now that you've determined the type of serve you want to make, here are a four tips on how to execute these serves well.
1. Keep your feet still
During the service, some part of both your feet must be in contact with the ground for it to be a legal serve.
2. Disguise your shots
Make sure your stroke is the same up to the point of contact with the shuttle. This will make your serve possible to predict only at the last possible second. Advanced players can try to trick their opponent by making it deliberately look like you're leaning back and about to do a high serve when you're really going to do a low serve.
3. Observe your opponents position
Is your opponent leaning towards the back already anticipating a high serve to the rear-court? In that case, you may want to execute a low serve to catch him off-guard. Always be aware of the position of your opponent. Try to imagine what he's expecting and do the opposite to gain an advantage.
4. Mix up your serves
Using just one type of service will make you too easy to predict. Make sure you incorporate at least two types of serves into your play. Once you've mastered the basic high and low serves, you can learn the flick and drive serves to add more dimension to your play.
In a nutshell, executing a service well allows you to start the rally strong and dictate its flow.
Explanation:
I hope it's help
PLEASE ANSWER ASAP BEFORE MY TEACHER AND MY MOM KILLES ME PLEASE ASAP
The first person with the right answer gets to be a brainlest
In the attachment there is a density column where there is colour
Question: tell me why is the red at the bottom of the density column if it is the least dense
Explanation: That is not meant to be red, it‘s the bottom of the beaker. The star is at the very bottom of the beaker. it’s just the base of the beaker.
a student attaches a 0.5 kg object to a 0.7 m string and rotates the object around her head and parallel to the ground. how much tension force is required to make the object rotate with a speed of 12 m/s?
The object would have a centripetal acceleration a of
a = (12 m/s)² / (0.7 m) ≈ 205.714 m/s²
so that the required tension in the string would be
T = (0.5 kg) a ≈ 102.857 N ≈ 100 N
(rounding to 1 significant digit)
6)
A flower pot weighing 42.0 N is hung above a window by three ropes, each
making an angle of 22.o with the vertical, as shown. What is the tension in
each rope supporting the flower pot?
220
Answert
Answer: 14.5 N
Explanation: NEED SCRATCH PAPER: A flower pot weighing 42.0 N (newtons) is hung above a window by three ropes, each making an angle of 15.0 degrees with the vertical. What is the tension in each rope supporting the flower pot?
✓ 14.5 N
found it on the internet?
hii Happy New year can you all please answer this
Answer:
truuuuuuuuuuuuueeeeeeeee
A He-Ne laser produces 633 nm light.
When it passes through a diffraction
grating with d = 5.55 x 10^-6 m, what is
the angle of its third order (m = 3)
maximum?
Answer:
20.0086
Explanation:sin^-1(3×633×10^-9)÷5.55×10^-6Answer:
20.0086
Explanation:
Acellus
Egg A is dropped from a height of 1m onto the floor. Egg B is dropped from a height of 1m into a bucket of water. Which statement
correctly describes why Egg B does not break?
Answer:
maybe it's because a bucket of water has more density than egg B
Answer:
Egg B experiences less force over a shorter time
Explanation:
Some one plzzz help
Answer:
138 km
Explanation:
What is your average velocity after going 15 meters east followed by 20 meters
west in 10 seconds?
Answer:
0.5 m/s
Explanation:
Velocity = displacement/time taken
going 15 meters east and then 20 meters west gives a displacement of 5 meters.
Velocity v = 5/10
= 0.5 m/s
importance of choke coil?
Answer:The choke coil works because it can act as an inductor. When the current pass through will change as AC currents creates a magnetic field in the coil that works against that current. This is known as inductance and blocks most of the AC current from passing through.
Explanation:
What is my name?:
I am a god
I am a guardian of the sun
I am used to measure heat.
Answer:
Apllo?
Explanation:
Which ray diagram demonstrates the phenomenon of absorption?
Answer:
B
Explanation:
The ray diagram demonstrated the phenomenon of absorption in B. Hence, option B is correct.
What is absorption?Absorption is the phenomenon of electromagnetic radiation taking up the energy of photons and it also transfers the electromagnetic energy to the internal energy of the absorber.
Absorption refers to the transfer of the energy of a wave to matter as the wave passes through it. The process in which the light waves get converted into energy. Absorption causes attenuation of the waves and the intensity decreases gradually when the light waves propagate through the medium.
From the given, the first diagram represents the light passes through the slit, it gets diffracted and forms alternate bright and dark fringes in the screen. The third diagram represents that the light ray strikes the surface it gets reflected and the path of light gets changed.
Thus, the absorption is the ray diagram given in the second image. Hence, option B is correct.
To learn more about Wave interactions:
https://brainly.com/question/29767263
#SPJ7
New 5G networks utilize millimeter-wave radiation. Millimeter-wave radiation refers to electromagnetic waves with frequencies in the range of 30-300 GHz. What are the free-space wavelengths that correspond to this frequency range
Answer:
It corresponds to 1mm-10 mm range.
Explanation:
Electromagnetic waves (such as the millimeter-wave radiation) travel at the speed of light, which is 3*10⁸ m/s in free space.As in any wave, there exists a fixed relationship between speed, frequency and wavelength, as follows:[tex]v = \lambda * f (1)[/tex]
Replacing v= c=3*10⁸ m/s, and the extreme values of f (which are givens), in (1) and solving for λ, we can get the free-space wavelengths that correspond to the 30-300 GHz range, as follows:[tex]\lambda_{low} = \frac{c}{f_{high}} = \frac{3e8m/s}{300e9Hz} = 1 mm (2)[/tex]
[tex]\lambda_{high} = \frac{c}{f_{low}} = \frac{3e8m/s}{30e9Hz} = 10 mm (3)[/tex]
Two forces whose resultant is 100newton are perpendicular to each other. If one of them makes an angle of 60newton with the resultant. Calculate it magnitude
Answer:
100 N
Explanation:
Given that,
Two forces whose resultant is 100newton are perpendicular to each other.
If one of them makes an angle of 60newton with the resultant.
[tex]F_1=100\times \sin60=86.60\ N[/tex]
and
[tex]F_2=100\times \cos60=50\ N[/tex]
The magnitude of force,
[tex]F=\sqrt{F_1^2+F_2^2} \\\\F=\sqrt{86.6^2+50^2} \\\\F=99.99\ N[/tex]
or
F = 100 N
So, the magnitude of force is 100 N.
PLEASE ANSWER ASAP BEFORE MY TEACHER AND MY MOM KILLES ME PLEASE ASAP
The first person with the right answer gets to be a brainlest
In the attachment there is a density column where there is colour
Question: tell me why is the red at the bottom of the density column if it is the least dense
Answer:
because it’s on the bottom, and to get to that part of it, think of it like that scene from moana when they go down into the realm of monsters they go through the thick parts to get to the thin parts, soo the cube wouldn’t be nearly able to reach that level
Explanation:
Answer:
the red at the bottom should not count, but the red at the top is the least dense because it floats upon the other liquids
Explanation:
hope this helps
58) Two balls, A and B are simultaneously projected from the top
of a building at 10 mis upwards & 20 m/s downwards respectively. Find
out the separation btwn them 3 sec after projection.
Answer:
90 m
Explanation:
For ball A::
The equation of a ball moving upwards is given by the formula:
s = ut - (1/2)gt²
where u is the initial velocity, t is the time covered, g is the acceleration due to gravity = 10 m/s² and s is the distance travelled.
Given that:
u = 10 m/s, t = 3 sec, g = 10 m/s², hence:
s = (10 * 3) - (1/2) * 10 * 3²
s = 30 - 45
s = -15 m
The negative sign means the object travels in the opposite direction. Hence s = 15 m
For ball B::
The equation of a ball falling downwards is given by the formula:
s = ut + (1/2)gt²
Given that:
u = 10 m/s, t = 3 sec, g = 10 m/s², hence:
s = (10 * 3) + (1/2) * 10 * 3²
s = 30 + 45
s = 75 m
Hence the separation between the two balls after 3 sec of projection = 15 m + 75 m = 90 m
Which of the following is NOT an argument for showing that the Earth must be round: a. during an eclipse of the Moon, the shadow of the Earth is always seen to be round b. when ships travel a large distance away, we see their hulls disappear first and their masts disappear last c. the height of the North Star changes as we travel to different latitudes d. photographs of the Earth from space always show a round body e. the Sun is seen blocking different constellations in the course of a year Submit Your Answer
Answer: The correct option is option E (the Sun is seen blocking different constellations in the course of a year.
Explanation:
The earth, which is one of the planets of the solar system that supports life, is shperical in shape. The spherical ( round) shape of the earth is marked by the intervening highlands and oceans on its surface.
Evidence to show that the earth is shperical are:
--> The Lunar eclipse: During an eclipse of the Moon, the shadow of the Earth is always seen to be round.
--> Ships Visibility: When ships travel a large distance away, we see their hulls disappear first and their masts disappear last.
-->Altitude of Polaris (North Star): The height of the North Star changes as we travel to different latitudes. That is ,increases as you move toward the North pole, or decreases as you move toward the equator.
--> Aerial photographs: Photographs of the Earth from space always show a round body.
The statement that doesn't prove that the earth is spherical in shape is (the Sun is seen blocking different constellations in the course of a year). The sun is seen in front of stars blocking different constellation in a year because the earth orbits round the sun in a year and not that it is shperical in shape.
arrange the values according to magnitude
1.8 X 10^5
4.3 X 10^-2
8.4 X 10^-6
9.0 X 10^-6
59000
Answer:
[tex]59000[/tex]
[tex]1.8\times 10^5[/tex]
[tex]4.3\times 10^{-2}[/tex]
[tex]9.0\times 10^{-6}[/tex]
[tex]8.4\times 10^{-6}[/tex]
Explanation:
The given numbers are
[tex]1.8\times 10^5=18000[/tex]
[tex]4.3\times 10^{-2}=0.043[/tex]
[tex]8.4\times 10^{-6}=0.0000084 [/tex]
[tex]9.0\times 10^{-6}=0.000009[/tex]
[tex]59000[/tex]
The arrangement of the numbers from largest to smallest is
[tex]59000[/tex]
[tex]1.8\times 10^5[/tex]
[tex]4.3\times 10^{-2}[/tex]
[tex]9.0\times 10^{-6}[/tex]
[tex]8.4\times 10^{-6}[/tex].
Which observation is the best evidence that some colors of visible light are
being absorbed in this photo?
A. The man's head is distorted under the water.
B. The top of the man's head appears disconnected.
C. The shape of the man's arm is clearly seen underwater.
D. The snorkel in the man's mouth appears yellow.
Answer:
D-The snorkel in the mans mouth appears yellow
Explanation:
Answer D is the only example related visible light being absorbed.
Tim’s cow is anemic. The cow is lacking which type of nutrient?
Answer:
Iron deficiency
Explanation:
or more scientifically explained as decreased hemoglobin levels in your blood but still caused by lack of iron.
The properties of elements can be predicted by which of the following?
Answer:
1 Answer. The Periodic Table can predict the properties of new elements, because it organizes the elements according to their atomic numbers. Creating new elements is not a simple process. Scientists use a particle accelerator to smash light atoms into a thin metallic foil that contains heavier atoms.
Explanation: