Answer:
V = 24 [V]
Explanation:
To solve this problem we must use ohm's law, which tells us that the voltage is equal to the product of resistance by the current.
V = I*R
where:
V = voltage [V]
I = current [amp]
R = resistance [ohm]
Therefore:
V = 0.4*60
V = 24 [V]
Consider a 400g baseball thrown from a height of 1.8m at 35m/s:
a. What is the gravitational potential energy of the baseball?
b. What is the elastic potential energy of the baseball?
c. What is the kinetic energy of the baseball?
d. What is the total mechanical energy of the baseball?
Answer:hhahe
Explanation:
How could you categorize or classify the five major types of
forces?
Answer:
Contact forces can be classified according to six types: tensional, spring, normal reaction, friction, air friction, and weight. Noncontact forces: Forces that take place when two objects do not touch. These forces can be classified according to three types: gravitational, electrical, and magnetic.
Explanation:
An object is moving east with a constant speed of 30 m/s for 5 seconds. What is the object's acceleration
Answer:
The answer is 6 m/s²Explanation:
The acceleration of an object given it's velocity and time taken can be found by using the formula
[tex]a = \frac{v}{t} \\ [/tex]
where
v is the velocity
t is the time
We have
[tex]a = \frac{30}{5} \\ [/tex]
We have the final answer as
6 m/s²Hope this helps you
How are Covalent bonds formed?
I believe it is introduced when the variation between the electronegativities of only two atoms is way too small for any transfer to take place to produce new ions.
Considering the definition of covalent bond, Covalent bonds are formed when valence electrons of non-metallic elements are shared and hold this elements together, forming a molecule.
Covalent bondThe covalent bond is the chemical bond between atoms where electrons are shared, forming a molecule.
Covalent bonds are established between non-metallic elements. These elements have many electrons in their outermost level (valence electrons) and have a tendency to gain electrons to acquire the stability of the electronic structure of noble gas. The shared electron pair is common to the two atoms and holds them together.
SummaryCovalent bonds are formed when electrons in the outermost level of non-metallic elements are shared and hold this elements together, forming a molecule.
Learn more about covalent bond:
brainly.com/question/12732708
brainly.com/question/29437411
#SPJ4
Match these items.
1. alpha rays
2. plasma
3. fission
4. beta rays
5. gamma rays
6. radioactive
7. fusion
a. splitting/dividing
b. joining together
c. release of atomic particles
d. high-energy light
e. helium nuclei
f. electrons
g. ions and free electrons
Answer:
Alpha Rays - Helium Nuclei
Gamma Rays - High-Energy Light
Fusion - Joining Together
Radioactive - Release of Atomic Particles
Beta Rays - Electrons
Fission - Splitting/Dividing
Plasma - Ions and Free Electrons
Explanation:
The correct match for the given terms:
1. alpha rays -Helium nuclei
2. plasma - ions and free electrons
3. fission - splitting/dividing
4. beta rays - electrons
5. gamma rays - high-energy light
6. radioactive - release of atomic particles
7. fusion - joining together
What is radioactivity?The nucleus of an atom exhibits the phenomenon of Radioactivity due to its instability. Energy will be lost due to the emission of radiation from the unstable nucleus of an atom.
The electrostatic force of repulsion and the powerful forces of attraction keep the nucleus together. The instability increases as the size of the nucleus increases because the mass of the nucleus increases when concentrated. Therefore, Plutonium, Uranium is extremely unstable and undergoes radioactivity.
The emitted radiation from radioactivity always consists of alpha, beta, and gamma particles. Gamma Decay is photons having high energy, Beta Decay consists of Electrons while Alpha Decay consists of a Helium nucleus.
Learn more about radioactive decay, here:
https://brainly.com/question/1770619
#SPJ2
Which of the following describes the relationship between work and power
Answer:
Power is the rate which work is done.
Explanation:
Power is the rate which work is done. Power is measured in watts.
Work is the use of force to move an object. Work is measured in joules
HeLp AsAp!!!!!! How long would it take you to hop 30 meters based on your speed for the 5-meter trial? Show your work!
Hopping =
Distance-5 m
Time-3.41
Speed-1.46
Answer:
20.5s
Explanation:
Given parameters:
Distance = 30m
Unknown:
Time = ?
Solution:
The time it will take to hop a distance of 30m using the speed for the 5m trial is the duration of the trip.
The speed for the 5m trial = 1.46m/s
Now;
Speed = [tex]\frac{distance}{time}[/tex]
Distance = speed x time
time = [tex]\frac{distance }{speed}[/tex]
Input the parameters and solve;
time = [tex]\frac{30}{1.46}[/tex] = 20.5s
what is measurement ?
Answer:
Measurement is the assignment of a number to a characteristic of an object or event
Explanation:
Answer:
Measurement is the assignment of a number to a characteristic of an object or event, which can be compared with other objects or event
Kinematics
29. A car starts from rest and attains a velocity
of 40 m/s in 20 s. It maintains this velocity
for 30 s and then comes to rest in 25 s.
Calculate
a) the acceleration of the car;
b) the deceleration of the car,
c) the total distance covered by the car.
Answer:
a)
a = 2 [m/s^2]
b)
a = 1.6 [m/s^2]
c)
xt = 2100 [m]
Explanation:
In order to solve this problem we must use kinematics equations. But first we must identify what kind of movement is being studied.
a)
When the car moves from rest to 40 [m/s] by 20 [s], it has a uniformly accelerated movement, in this way we can calculate the acceleration by means of the following equation:
[tex]v_{f} = v_{i}+(a*t)[/tex]
where:
Vf = final velocity = 40 [m/s]
Vi = initial velocity = 0 (starting from rest)
a = acceleration [m/s^2]
t = time = 20 [s]
40 = 0 + (a*20)
a = 2 [m/s^2]
The distance can be calculates as follows:
[tex]v_{f} ^{2} = v_{i} ^{2}+(2*a*x)[/tex]
where:
x1 = distance [m]
40^2 = 0 + (2*2*x1)
x1 = 400 [m]
Now the car maintains its speed of 40 [m/s] for 30 seconds, we must calculate the distance x2 by means of the following equation, it is important to emphasize that this movement is at a constant speed.
v = x2/t2
where:
x2 = distance [m]
t2 = 30 [s]
x2 = 40*30
x2 = 1200 [m]
b)
Immediately after a change of speed occurs, such that the previous final speed becomes the initial speed, the new Final speed corresponds to zero, since the car stops completely.
[tex]v_{f} = v_{i}-a*t[/tex]
Note: the negative sign of the equation means that the car is stopping, i.e. slowing down.
0 = 40 - (a *25)
a = 40/25
a = 1.6 [m/s^2]
The distance can be calculates as follows:
[tex]v_{f} ^{2} = v_{i} ^{2} -2*a*x3\\[/tex]
0 = (40^2) - (2*1.6*x3)
x3 = 500 [m]
c)
Now we sum all the distances calculated:
xt = x1 + x2 + x3
xt = 400 + 1200 + 500
xt = 2100 [m]
What is meant by the term total internal reflection? What two conditions must be met for total internal reflection to occur?
Answer:
Hello....
Explanation:
Total internal reflection, in physics, complete reflection of a ray of light within a medium such as water or glass from the surrounding surfaces back into the medium. The phenomenon occurs if the angle of incidence is greater than a certain limiting angle, called the critical angle.
The conditions required for total internal reflection (TIR) to occur are:
1)the light must be travelling from a more dense medium into a less dense medium (ie glass to air)
2)the angle of incidence must be greater than the critical angle.
HOPE IT HELPS YOU DEAR....
PLEASE MARK AS BRAINLIEST....
PLEASE FOLLOW ME...
What will most likely happen if a sound wave moves from the air through a solid? It will increasein wavelength It will decrease in speed It wil increase in speed It will decrease in wavelength.
Answer:
C. it will increase in speed
Explanation:
on edge 2020 :)
Answer:
It will increase in speed.
Explanation:
sound waves travel the fastest through solids, slower through liquids, and slowest through gases
If the x-component of velocity is 27m/s and the y-component of velocity is -23 m/s, what is the resultant vector?
Answer:
35.47 m/s
Explanation:
[tex]r = \sqrt{( - 23)^{2} + (27) ^{2} }[/tex]
=35.57
A car is driving down the road at 30 MPH. A bug hits the windshield with a force of 50N. With what force does the car hit the bug?
Group of answer choices
80N
20N
50N
300N
Answer:
80 N
Explanation:
The windshield is a part of the car and the bug hits it so the bug hits the car. they both are in opposite directions so their total force will be 80N
Describe the nucleus of the atom.
Answer:
The atomic nucleus is the small, dense region consisting of protons and neutrons at the center of an atom, discovered in 1911 by Ernest Rutherford based on the 1909 Geiger Marsden gold foil experiment. Almost all of the mass of an atom is located in the nucleus, with a very small contribution from the electron cloud.
what is the distance from letter D to A?
Answer:
5 is a correct Answer iiiiiiiiiii
A surfer travels for 45 min at an average speed of 0.6 kilometers per min. How far does he travel in that
time?
Answer:
you would do multiplication, d=rt. (distance=d rate=r time=t).
Explanation:
You already have all the variables figure out so just plug in the numbers.
For an easier equation you would just do .6*45=27, the 27 is the total kilometers in 45 minutes.
Pllzzzz help I will mark u as a brainliest
Answer:
You dont need BRAINLY there is an app called slader where you scan the textbook barcode and it shows you the answers for the question in the textbook.
Explanation:
Which friction static friction, kinetic friction, or air friction? Can be more than one response.
Gripping friction.
kinetic friction
air friction
static friction
What distance is required for a train to stop if its initial velocity is 23 m/s and its
deceleration is 0.25 m/s²? (Assume the train decelerates at a constant rate.)
-- The train starts at 23 m/s and slows down by 0.25 m/s every second.
So it'll take (23/0.25) = 92 seconds to stop.
-- Its average speed during that time will be (1/2)(23+0) = 11.5 m/s
-- Moving at an average speed of 11.5 m/s for 92 sec, the train will cover
(11.5 m/s) x (92 sec) = 1,058 meters .
The distance required for the train to travel before stopping is 1,058 m.
The given parameters;
initial velocity of the train, u = 23 m/s
deceleration of the train, a = 0.25 m/s
The distance traveled by the train is calculated as follows;
[tex]v^2 = u^2 -2as[/tex]
where;
v is the final velocity of the train
The final velocity of the train is zero when the train stops
[tex]v^2 = u^2 -2as\\\\0 = 23^2 - 2(0.25)s\\\\0.5s = 529\\\\s = \frac{529}{0.5} \\\\s = 1,058 \ m[/tex]
Thus, the distance required for the train to travel before stopping is 1,058 m.
Learn more here: https://brainly.com/question/23852683
The sphere that refers to Earth's water is called what?
Tge sphere that refers to Earth's water is Hydrosphere.
Choose the scientific theories that have been disproved through scientific advancement. Select all that apply.
a) steady-state theory
b) theory of evolution
c) big bang theory
d) geocentric universe
e) phrenology
What is the relationship between the tilt of the Earth on its axis, latitude, and temperature?
Answer:
The combination of more direct rays of sunlight and more hours of daylight causes the hemisphere tilted toward the sun to receive more solar radiation and to have warmer temperatures. When the Northern Hemisphere is tilted toward the sun, latitudes between the equator and 90°N (the North Pole) are experiencing summer.
Hope this helps :) :) :)
The town of Seaside needs to build a new power plant. The old coal burning plant produces too much pollution and is no longer safe. The mayor decides that he will do some research on alternative forms of energy like nuclear power plants and solar power plants.
What types of resources should the mayor use to conduct his research? Why would these be considered reliable sources of information and why? What types of resources are reliable? How can he use what he learns to make the best decision for the town?
The mayor is making a good decision to do research into renewable forms of energy. Not only does coal produce pollution, it also contributes to greenhouse gas emissions. Plus, the supply of coal is a finite source. It is considered a natural resource instead of renewable. That means that eventually the supply of coal will run out at some point. Renewables do not encounter such a problem.
So it's smart to look into alternative forms of energy such as nuclear or solar. The benefit of nuclear is that it produces a lot of energy and does so efficiently. The downside is that it's that accidents would lead to disastrous outcomes (eg: the nuclear disaster in Japan). Also, there's the issue of what to do with the nuclear waste. The waste itself is very dangerous and it must be buried underground sealed in thick containers. This is an expensive operation. The rate of decay of the material takes a long time, which means that future generations hundreds of years down the line will have to deal with the waste.
Solar is a cleaner alternative to nuclear, but unfortunately it is not as efficient compared to nuclear power. You need a lot of solar panels in a vast open area to be able to get the energy to power many homes. Places out in the desert are a good choice to put the solar farms because the sun shines intensely there and not many people (or no people) live out in remote areas such as that one.
Because the town is called Seaside, it seems like this town is on the coast. If so, then the mayor should look into wind power to complement solar power. Wind along the coast is often very intense due to the sea current and jet stream. The downside to wind power is that some days the wind doesn't blow at all. The mayor could also look into tidal power which harnesses the flow of the tides coming in and out. If a major river is nearby (that flows into the ocean) then s/he could consider hydroelectric power as well. There are many renewable options to pick from. Each option has its pros and cons, so it's up to the mayor to weigh what exactly their needs are and how efficiently they want electricity. Mixing various options is possibly the best idea since you get a bit of each pro/con from all the options mentioned.
Why is there no weather on the Moon?
Answer:
the moon has no atmosphere, and it cannot trap heat or insulate the surface.
Explanation:
the moon is too small. ... With weak gravity, gases that are emitted from the surface quickly are lost to outer space.
A projectile is launched horizontally at a speed of 30m/s from a 100m tall building. how much time it will take to reach the ground?
Answer:
3.3 seconds I believe
Explanation:
A racehorse coming out of the gate accelerates from rest to a velocity of 12.0
m/s due west in 2.30 s. What is its average acceleration?
27.6 m/s^2
5.22 m/s^2
-5.22 m/s^2
-27.6 m/s^2
-0.19 m/s^2
O 0.19 m/s^2
Answer:
5.22 m/s²
Explanation:
From the question given above, the following data were obtained:
Initial velocity (u) = 0 m/s
Final velocity (v) = 12 m/s
Time (t) = 2.3 s
Acceleration (a) =.?
Acceleration is defined as the change of velocity with time. Mathematically, it is expressed as:
Acceleration (a) = final velocity (v) – initial velocity (u) / time (t)
a = (v – u) /t
With the above formula, we can obtain the acceleration of the racehorse as follow:
Initial velocity (u) = 0 m/s
Final velocity (v) = 12 m/s
Time (t) = 2.3 s
Acceleration (a) =.?
a = (v – u) /t
a = (12 – 0) / 2.3
a = 12 /2.3
a = 5.22 m/s²
Therefore, the average acceleration of the racehorse is 5.22 m/s²
if you go three times around a complete circular lawn of raidius r and reach the starting point, then the displacement is zero. true or false
Answer:
true
Explanation:
the starting point is zero so if you go back to the starting point it'll be zero since displacement is where you left off.
PLEASE HELP ME
A boulder is raised above the ground so that the gravitational potential energy relative to the ground is 310 J. Then it is dropped. What is its kinetic energy just before it hits the ground?
Answer:
try this
Explanation:
The energy of a falling object when it hits the ground is equaled to the energy it starts with because the potential energy is converted into kinetic energy entirely with the height at 0. This means the energy would be 200 J.
RESULT
A wagon with a mass of 35 kg is pulled so that it accelerates from 0 m/s to 30 m/s in 15
seconds.
Remember to show all work!
a. What is the acceleration of the wagon?
b. What is the force required to get this acceleration?
Plz help me
Explanation:
a = v-u/t
a is the acceleration of the body
v is the final velocity
u is the initial velocity
t is the time
Given
v = 30m/s
u = 0m/s
t = 15secs
Substitute
a = 30-0/15
a = 30/15
a = 2m/s²
Hence the acceleration of the wagon is 2m/s²
b) Force = mass * acceleration
Given
Mas of the wagon = 35kg
acceleration a = 2m/s²
F = 35*2
F = 70N
Hence the force required to get this acceleration is 70N
many atoms of each element are in one molecule of 2-heptanone?
A chemical structure of a molecule includes the arrangement of atoms and the chemical bonds that hold the atoms together. The 2-HEPTANONE molecule contains a total of 21 bond(s) There are 7 non-H bond(s), 1 multiple bond(s), 4 rotatable bond(s), 1 double bond(s) and 1 ketone(s) (aliphatic).
:/ hope this helps