a reflection nebula is described by group of answer choices a. reflection of light off the dust of the nebulae b. the explosion of hot large stars. c. the emission of light from excited hydrogen gas d. the emission of radiation from torn up material falling into black holes

Answers

Answer 1

A reflection nebula is described by the explosion of hot large stars. Option B.

Reflection nebulae differ from emission nebulae in that they themselves do not emit radiation. This is a cloud of dust and gas that reflects light energy from a nearby star or group of stars. They usually tend to be blue due to the way light scatters.

This nebula is a reflection nebula that glows by reflecting the light of nearby stars. In contrast to emission nebulae, which emit a reddish glow from excited gas atoms, reflection nebulae are bluish because interstellar dust particles prefer to reflect blue starlight. A cloud of gas and dust that emits no light of its own and glows by reflecting light from nearby stars.

Learn more about Reflection nebulae here:- https://brainly.com/question/28620777

#SPJ4


Related Questions

in Section 24-2. you learned how Neptune is afferent from Uranus, and how its rings and moons fomed and evolved Based on what you leamed about Uranus select all of the correct statements from the following list Neptune is similar to Uranus as far as sze, mass, composition and interior structure Lke Uranus, Neptune shows very little atmospheric activity Neptune's largestmoon Triton, has a retrograde orbit which suggests that it was captured i Beng much farther from the sun. Nepture has less internal heat than Uranus Triton has a tin atmosphere and may be geologically active Lke Uranus. Neptune's solid core prevented from having a magnetic field Neptune's position was predicted before it was discovered

Answers

Neptune and Uranus are similar in terms of size, mass, composition, and internal structure. The largest moon of Neptune, Triton, appears to have been captured because of its retrograde orbit.

Triton has a thin atmosphere and could be experiencing geological activity. Neptune's location was anticipated before it was ever discovered. Neptune is one of just two ice giants in the outer solar system (the other is Uranus). The planet's bulk, which is composed of a hot, dense fluid floating atop a tiny, rocky core, is primarily made up of water, methane, and ammonia (80% or more). Uranus is Neptune's identical twin. Their mass and chemical contents are equivalent. They are composed of an exterior layer of rocks and a mantle that is a mixture of water, ammonia, and methane ices.

Therefore, a physical body's mass is its total amount of matter. Inertia, or the body's resistance to acceleration (change of velocity) when a net force is applied, is also measured by this property. The gravitational pull an object has on other bodies is also influenced by its mass. The kilograms is the fundamental mass unit of SI (kg).

Learn more about mass here: brainly.com/question/18064917

#SPJ4

a two-stage rocket moves in space at a constant velocity of 4900 m/s. the two stages are then separated by a small explosive charge placed between them. immediately after the explosion the velocity of the 1200-kg upper stage is 5700 m/s in the same direction as before the explosion. what is the velocity (magnitude and direction) of the 2400-kg lower stage after the explosion?

Answers

The small explosive charge produces only internal forces between the two stages of the rocket, so no external forces. Momentum is conserved.

=

( + )( ⁄) − ( )( ⁄)/

=

. / − . //

= . / /

=. / / = /s

Since this is positive the lower stage is moving in the same direction as the upper stage and both are in the same as the original direction.

Therefore, The small explosive charge produces only internal forces between the two stages of the rocket, so no external forces. Momentum is conserved.

To know more about momentum, check out:

https://brainly.com/question/1042017

#SPJ4

an object is traveling with a constant velocity with no unbalanced forces acting upon it. what do we expect this object to do?

Answers

While changing direction, the object will continue to move at the same speed.

What are velocity and speed?

In way of comparison to kinetic energy, which defines the course and speed of an object's moving, velocity is the amount of mobility along one journey. Alternatively, velocity is a vector and speed is a scalar quantity.

Exactly why is velocity measured?

The rate and direction of motion are measured by a vector known as velocity. The speed that something moves in one direction is known as its velocity. Velocity can be used to gauge both the speed of an oncoming car on a busy freeway and the speed of a rocket being launched into space.

To know more about Velocity visit:

https://brainly.com/question/28738284

#SPJ4

Anna Litical analyzes the force between a planet and its moon, varying the mass of
the moon and the distance between the moon and the planet. Her data is shown
below. Which force ranking is consistant with Anna's data?
Trial Mmoon (kg)
1
6 x 1022
2
6 x 1022
3
3 x 1022
d (km)
3500
7000
7000
Trial 3 is the largest, trial 1 is the smallest
Trial 3 is the largest, trial 2 is the smallest
O Trial 1 is the largest, trial 3 is the smallest
Trial 1 is the largest, trial 2 is the smallest

Answers

Answer:

Trial 1 is the largest, trial 3 is the smallest

Explanation:

Given:

Trial 1

M₁ = 6·10²² kg

d₁ = 3 500 km = 3.5·10⁶ м

Trial  2

M₂ = 6·10²² kg

d₂ = 7 000 km = 7·10⁶ м

Trial  3

M₃ = 3·10²² kg

d₃ = 7 000 km = 7·10⁶ м

___________

F - ?

Gravitational force:

F₁ = G·m·M₁ / d₁² = m·6.67·10⁻¹¹·6·10²² / (3.5·10⁶)² = 0.37·m  (N)

F₂ = G·m·M₂ / d₂² = m·6.67·10⁻¹¹·6·10²² / (7·10⁶)² = 0.08·m  (N)

F₃ = G·m·M₃ / d₃² = m·6.67·10⁻¹¹·3·10²² / (7·10⁶)² = 0.04·m  (N)

Trial 1 is the largest, trial 3 is the smallest

if electromagnetic radiation a has a lower frequency than electromagnetic radiation b, then compared to b, the wavelength of a is:____.

Answers

Answer:
THE WAVELENGTH OF A IS MORE THAN THAT OF B .

Explanation:
This can be Explained as c= f x (lambda)
Where
C = constant = speed of light
F = frequency and
Lambda = wavelength of light

In other words frequency is inversely proportional to wavelength.

So as the frequency of A is lower than that of B .
The wavelength of A must be more than that of B .

Learn more about wavelength here https://brainly.com/question/13533093?referrer=searchResults
#SPJ4

a light ray reflects from a surface. if the angle of incidence is 24°, what is the angle that the reflected ray makes with the surface? 

Answers

Since the angle of incidence and reflection are equal (90° - 24° = 66°), the angle that perhaps the reflected beam forms with the surface is 66°.

What is the science's perspective?

If two lines meet at a common point, an angle is created. A right angle is one that is 90 degrees, and they can be found within every corner of a square. Angles that are wider are said to as obtuse and those that are more acute.

In physics, how is a plane angle?

As illustrated below, the size of the circle that the arcs at two points subtend and its arc length together define the angle, or, that is formed when the lines from those two points meet at the circle's vertex.

To know more about Angle visit:

https://brainly.com/question/26700114

#SPJ4

a 2800. kg rollercoaster is traveling at 18.5 m/s along its track. what is the largest radius loop (in m) that the coaster could successfully go around at that speed?

Answers

The Radius loop of 34.88m that coaster could go around with speed of 18.5m/s.

Mass of rollercoaster =2800kg

Speed is 18.5m/s

On a roller coaster, the so-called clothoid loops are the most obvious place where centripetal acceleration takes place. A spiral segment with a variable radius is called a clothoid. The radius at the bottom of a clothoid loop is significantly larger than the radius at the top, in contrast to a circular loop where the radius is a constant value.A clothoid's curvature is less at the bottom of the loop than it is at the top. We will characterize a clothoid loop as being made up of a number of circular sections that overlap or are adjacent to one another in order to simplify our analysis of the physics of clothoid loops.

[tex]V=\sqrt{gR}\\ \\V=speed=18.5m/s\\\\g=gravity=9.81m/s^2\\\\R=radius[/tex]

Calculation- squaring both sides of equation.

[tex]V^2=gR\\\\R=V^2/g\\\\R=18.5^2/9.81\\\\R=342.25/9.81\\\\R=34.88m[/tex]

To study more about centripetal acceleration -

https://brainly.com/question/14465119

#SPJ4

g a projectile is shot directly away from earth's surface. neglect the rotation of the earth. what multiple of earth's radius gives the radial distance the projectile reaches if its initial speed is 0.745 of the escape

Answers

The multiple of earth's radius which gives the radial distance is 4/3 or 1.33.

Initial speed = 0.745

However,

We know that escape velocity = V = √ (GM/2Rₓ)

So, using the property of energy conservation,

= (1/2)mv² - GMm/2Rₓ

= - GMm/r

The escape velocity, in astronomy and space exploration, is the velocity needed for a body to escape from a gravitational centre of attraction without undergoing any further acceleration. It is the minimum velocity required by a body to be projected to overcome the gravitational pull of the earth.

Thus,

= r = 4Rₓ / 3

Hence the multiple of Rₓ is 4/3 or 1.33.

To know more about Escape Velocity:

https://brainly.com/question/15521112

#SPJ4

two pool balls, each moving at 2 m/s, roll toward each other and collide. suppose after bouncing apart, each moves at 2 m/s. assume the positive direction is to the right. this collision violates conservation of a. kinetic energy b. momentum c. both kinetic and momentum d. none of the above

Answers

Answer:

(D)  From what has been given

For a linear elastic collision the speed of separation equals the speed of approach - if the relative speed of approach  was 4 m/s, the relative speed of separation will be 4 m/s - both KE and momentum are considered conserved

a space vehicle is in a circular orbit about the earth. the mass of the vehicle is , and the radius of the orbit is . it is desired to transfer the vehicle to a circular orbit of radius . an efficient way to accomplish the transfer is to use an elliptical orbit from point on the inner circular orbit to a point on the outer circular orbit (known as a hohmann transfer orbit). (part a) what is the speed and kinetic energy of an object of mass moving in a circular orbit of radius and speed about a planet of mass ?

Answers

The speed and kinetic energy of an object of mass m moving in a circular orbit of radius r and speed v about a planet of mass M is given by v = √(GM/r), KE = ½m(GM/r).

What is kinetic energy?
The energy an object has as a result of motion is known as kinetic energy in physics. It is described as the effort required to move a mass-determined body from rest to the stated velocity. The body holds onto the kinetic energy it acquired during its acceleration until its speed changes. The body exerts the same amount of effort when slowing down out of its current speed to the a state of rest. Officially, a kinetic energy would be any term that includes a derivative to respect to time in the Lagrangian of a system.

Speed:

The speed of an object of mass m moving in a circular orbit of radius r with speed v around a planet of mass M is given by:
v = √(GM/r)
where G is the gravitational constant (6.67 × 10-11 N*m2/kg2).

Kinetic Energy:
The kinetic energy of an object of mass m moving in a circular orbit of radius r with speed v around a planet of mass M is given by:
KE = ½mv2
Substituting the expression for v into this equation, we get:
KE = ½m√(GM/r)2
KE = ½m(GM/r)

Therefore, the speed and kinetic energy of an object of mass m moving in a circular orbit of radius r and speed v about a planet of mass M is given by:

v = √(GM/r)
KE = ½m(GM/r)

To learn more about kinetic energy
https://brainly.com/question/8101588
#SPJ4

how much work must denise do to drag her basket of laundry of mass 8.0 kg a distance of 6.0 m along a floor, if the force she exerts is a constant 30.0 n at an angle of 60o with the horizontal?

Answers

90 J work must Denise do to drag her basket of laundry of mass 8.0 kg a distance of 6.0 m along a floor if the force she exerts is a constant 30.0 N at an angle of [tex]60^0[/tex] with the horizontal.

It is given that,

Mass of the basket = 8.0 Kg.

Distance from where it needs to be dragged = 6.0 m

Constant force = 30.0 N = F

Value of angle = [tex]\theta[/tex]= [tex]60^\circ[/tex]

As we know, the value of work done can be determined by using the formula:

[tex]w=\mathrm{Fscos}(\theta)[/tex]

So, putting the value of F, s and value of angle in above formula:

We will get, the value of work done as:

[tex]\mathrm{w}=30 \times 6 \times \cos (60) \\& =180 \times \frac{1}{2} \\& =90 \text { joule }[/tex]

For more such question on Work:

https://brainly.com/question/25573309

#SPJ4

in an oscillator consisting of a spring and a block, the amount of kinetic energy reaches maximum when:

Answers

In an oscillator consisting of a spring and a block, the amount of kinetic energy reaches maximum when: A. The block passes over the equilibrium point.

What is kinetic energy?

In Science, kinetic energy can be defined as a type of energy that's possessed by a physical object or body, especially due to its motion or a change in velocity (acceleration).

This ultimately implies that, a physical object or body would gain more of kinetic energy as it falls back toward the Earth because it is in motion.

In an experiment that is based on an oscillator using both a spring and a block, the amount of kinetic energy that is possessed by the block would reach maximum when it passes over the equilibrium point.

Read more on kinetic energy here: brainly.com/question/1242059

#SPJ1

Complete Question:

In an oscillator consisting of a spring and a block, the amount of kinetic energy reaches maximum when:

The block passes over the equilibrium point.

The block is at maximum positive displacement from the equilibrium point.

The spring's extension is half of the amplitude of oscillation.

The spring is at maximum compression.

None of these.

use newton's method to approximate the zero(s) of the function. continue the iterations until two successive approximations differ by less than 0.001. then find the zero(s) to three decimal places using a graphing utility and compare the results. f(x)

Answers

Only one genuine zero exists, and it is found at x = 1.359. newton's method to approximate the zero(s) of the function

The first three decimal places were repeated in the solution after the fourth iteration. I began by assuming that x = 1 was the answer to the Newton's Method formula.

When I entered 1 for x, I received a zero of 5/3.

I entered 5/3 and repeated the process to get 997/687.

I was able to get 1.36976 by plugging in 997/687 and repeating the process.

I entered 1.36976 and repeated the process to get 1.359454.

I entered 1.359454 and repeated the process to get 1.359304.

There was no need to go any further because we are only interested in accuracy to three decimal places.

Learn more about newton here-

https://brainly.com/question/3273157

#SPJ4

a 12 cm length spring is attached to the ceiling. when a 2.5 kg mass is hung from it, the spring stretches to a length of 16 cm. calculate the spring constant, k.

Answers

the spring constant, k for a 12 cm length attached to the ceiling with 2.5 kg mass is 612.5.

what is spring constant ?

The stiffness of the spring is how we determine spring constant. In other words, we can define the spring constant as the force used to produce the specified displacement when the spring's displacement is one unit. It follows that a spring's spring constant will increase with increasing spring stiffness.

from the given information -

length of spring before attaching mass = 12 cm

length after attaching mass = 16 cm

mass attached = 2,5 kg

Force = k.x

k= Force/x = 2.5 x 9.8 / 0.04 = 612.5

Thus the spring constant, k for a 12 cm length attached to the ceiling with 2.5 kg mass is 612.5.

To learn more about spring constant click here:

https://brainly.com/question/4433395

#SPJ4

in sec. 10.6 of the experiment, your ear simultaneously hears waves from different sources, so it can hear beats from the two speakers. suppose one speaker is driven at 590 hz and the other at 560 hz. what is the beat frequency (in hz)?

Answers

It can hear the two speakers' beats because of the frequency of 30 Hz. Consider driving one speaker at 590 Hz and another at 560 Hz.

Why not offer an example of frequency?

The quantity of observations that take place during a specific predetermined timeframe is the frequency of the a class interval. Therefore, if 20 individuals between the ages of 5 and 9 are found in the data from our study, the frequency again for 5–9 age range is 20.

What is the purpose of frequency?

The temporal rate of evolution seen in oscillatory & periodic events, such as vibrations, speech recordings (sound), radio frequencies, and light, is specified by the frequency, an essential parameter in science and engineering.

Briefing:

Beat frequency f = f₂ - f₁

F₂ = 590 Hz

F₁ = 560 Hz

f = 590 - 560

f = 30 Hz

To know more about frequency visit:

https://brainly.com/question/17196899

#SPJ4

two students are playing paper football at their lab table. the first student launches the paper football at 15 m/s at 43 degrees. find the x component of the velocity vector.

Answers

Two students are playing paper football. The x-component of the velocity vector is 10.97 m/s.

Given that,

Initial velocity of the football is, u = 15 m/s

Angle of projection, θ = 43°

The x-component of the velocity which is also known as horizontal component is given as:

Vx = V cos(43°) = 15* 0.731 = 10.965 ≈ 10.97 m/s

The y-component of the velocity which is also known as vertical component is given as:

Vy = V sin(43°) = 15* 0.682 = 10.23 m/s

Thus, x-component of the velocity is 10.97 m/s, y-component of the velocity is 10.23 m/s.

To know more about velocity:

https://brainly.com/question/19819925

#SPJ4

a particle is moving with a constant velocity in the x-direction. when the particle reaches the origin, a constant force is exerted on it in the y-direction. which of the following graphs best shows the path the particle will follow?

Answers

Parabolic Up. Since the force is in the y-direction, the particle will continue to move at a constant speed in the x-direction and accelerate in the y-direction. This creates a parabolic path around y-axis.

Force is the power that changes the motion of an item. A force can purpose an object with mass to alternate its pace. Pressure also can be described intuitively as a push or a pull. A force has both value and path, making it a vector quantity.

Pressure is a push or a pull and it affects us in our daily lives because, without force, people might not be capable of open and near stuff or lifting up their arms or legs.

Variety of Forces :

* Muscular Forces, muscular tissues feature to produce an ensuing force which is referred to as 'muscular force'.

* Frictional Forces, while an item modifications its national motion, 'frictional pressure' acts upon it.

* Carried out pressure.

* Tension force.

* Spring force.

* Gravitational pressure.

Learn more about Force here:-https://brainly.com/question/12785175

#SPJ4

A mover is trying to lift a piano (slowly) up to a second-story apartment. He use a pulley and ropes to decrease the force needed to raise a heavy load (Figure 1) Figure 1 of 1 B mg Part A But for every meter the load is raised, how much rope must be pulled up? Account for this, using energy concepts O For each meter of the load is raised, 2 m of rope must be pulled up. O For each meter of the load is raised, 2.5 m of rope must be pulled up For each meter of the load is raised, 1.5 m of rope must be pulled up. O For each meter of the load is raised, 0.5 m of rope must be pulled up. Submit Request Answer Provide Feedback

Answers

Two metres of rope must be raised in order to move the burden every metre.

Explain why two metres of rope should be raised.

Assuming no dissipative forces are at work over the rope.

The effort is used to draw upward on the rope's free end while the load is hung from the pulley block. The effort required is just half the amount of the load because the load is now suspended from two ropes, each of which is bearing half of the weight.

Hence, two metres of rope must be raised in order to move the burden every metre.

To learn more about forces, follow the link:

https://brainly.com/question/29676926

#SPJ4

A person can see objects clearly only if they are between 0.6 m and 4 m from her eyes. Her optometrist prescribes bifocals that enable her to see distant objects through the top half of the lenses and read papers at a distance of 0.25 m through the lower half. What are the respective powers of the top and bottom lenses?a. -0.25 dB (top lens); +5.7 dB (bottom lens)b. +2.3 dB (top lens); -3.3 dB (bottom lens)c. +4 dB (top lens); -1.7 dB (bottom lens)d. -5.7 dB (top lens); +0.25 dB (bottom lens)e. -0.25 dB (top lens); +2.3 dB (bottom lens)

Answers

A person can see objects clearly only if they are between 0.6 m and 4 m from her eyes. Her optometrist prescribes bifocals that enable her to see distant objects through the top half of the lenses and read papers at a distance of 0.25 m through the lower half. What are the respective powers of the top and bottom lenses?a. -0.25 dB (top lens); +5.7 dB (bottom lens)b. +2.3 dB (top lens); -3.3 dB (bottom lens)c. +4 dB (top lens); -1.7 dB (bottom lens)d. -5.7 dB (top lens); +0.25 dB (bottom lens)e. -0.25 dB (top lens); +2.3 dB (bottom lens).

e. -0.25 dB (top lens); +2.3 dB (bottom lens)

docs of optometry (O.D.s/optometrists), the usa's number one eye health care carriers, are the frontline of eye and vision care. doctors of optometry are essential fitness care companies and are diagnosed as physicians underneath Medicare. They study, diagnose, treat and control illnesses and issues of the attention.

Learn more about optometrist here:-

brainly.com/question/7454688

#SPJ4

which of the following are true of how proportions of oxygen isotopes are changed over interglacial and glacial periods in seawater and glacial ice?

Answers

If a glacier has a smooth bedrock-glacier interface and/or that interface contains water from melting ice, that glacier is likely to move more rapidly than one that has an irregular interface and is frozen at its base is true.

Isotope geochemistry is a key technique for studying long-term climate change. The most common type of oxygen has 8 protons and 8 neutrons, giving it an atomic weight of 16 (¹⁶O), which is referred to as "light" oxygen. Because only a tiny percentage of oxygen atoms contain two additional neutrons, giving them an atomic weight of 18 (¹⁸O), or "heavy" oxygen, the rest of oxygen is referred to as "light" oxygen. Only roughly 1 in 500 oxygen atoms contain the uncommon form ¹⁸O.

Although the amount of heavy oxygen in ice varies with temperature, it has less ¹⁸O than saltwater. We need to consider the process of glacier formation in order to comprehend why this may be the case. The water-ice in glaciers began as mist in the seas, fell as snow, and then solidified into ice. When water vaporizes, the light water ([tex]H_{2}[/tex]O) enriches the water vapor while the heavy water ([tex]H_{2}[/tex]¹⁸O) is left behind ([tex]H_{2}[/tex]¹⁶O). This is only a result of the heavier molecules finding it more difficult to get past the evaporation barriers. So, although the oceans are considerably richer in ¹⁸O, glaciers are relatively enhanced in ¹⁶O. In contrast to warmer regions, this imbalance is more pronounced in colder climates.

To know more about Oxygen isotopes visit:

https://brainly.com/question/29445502

#SPJ4

a transverse wave on a thin rope has a wavelength of 58\;\mathrm{cm}58cm, an amplitude of 6.4\;\mathrm{cm}6.4cm, and a period of 7.3\;\mathrm{s}7.3s. what is the propagation velocity of this wave?

Answers

The size of a wave is equivalent to half its top to valley distance, which is the solution to the question.

How can one measure wavelength?A wave sensor's length, which corresponds to the distance between two identical locations (next crests) in successive cycles, determines whether it is sent through space or via a wire. In wireless systems, this length is often specified in meters (m), centimeters (cm), or millimeter (mm) (mm). The duration can be calculated as the distance between two contiguous wave front peaks or waves propagating compressions. It is often represented in meters. Such waves have a relationship between their energy and wavelength. Waves with a shorter wavelength have had more energy than waves with a longer wavelength of the same intensity.A wave is generated as a result of oscillations which creates disturbances in the medium and these disturbances termed as waves propagates or travels from one point to another.Waves can be classifies as:Mechanical waves which requires material medium for their propagationElectromagnetic waves which do not require any material medium to propagate.A wave travels at a specific velocity depending on the type of the medium in which it propagates.

Briefing:

A = 1/2* distance

A = 1/2* 5.8

A = 2.9m

To learn more about propagation velocity refer to:

brainly.com/question/13533093

#SPJ1

a crew of scientsits has b uilt a new space station the space station is shaped lke a wheel of radius r with esssentially all its mass m at the irm. When the crew arrives. The Station will be set roteting at a rate that causes an object at the rim to have radial acceleration g, thereby simulatitng Earth's surface gravity. This is accomplished by

Answers

The required time need to fire the rockets to achieve the desired condition is by the relationship of centripetal acceleration by angular acceleration and angular velocity, t = [tex]\sqrt{gR}\frac{M}{2T}[/tex]

What is Centripetal Acceleration?

Centripetal acceleration is a characteristic of an object's motion along a circular path. Centripetal acceleration applies to any item travelling in a circle with an acceleration vector pointing in the direction of the circle's center. In your daily existence, you must have encountered numerous instances of centripetal acceleration. A centripetal acceleration occurs when you drive in a circle, and a centripetal acceleration also occurs when a satellite orbits the Earth. Centripetal refers to being in the middle.

Radius of the spaceship in the form of a wheel = R

Mass of the spaceship concentrated at its rim = M

Radial acceleration of any object placed on the spaceship = g

Thrust exerted by the rocket = T

Time needed to fire the rockets = t

I understand the question you are looking for

"A crew of scientists has built a new space station. The space station is shaped like a wheel of radius R with essentially all its mass M at the rim. When the crew arrives the station will be set rotating at a rate that causes an object at the rim to have radial acceleration g thereby simulating Earth's surface gravity. This is accomplished by two small rockets each with thrust T newtons mounted on the station's rim. How long a time t does one need to fire the rockets to achieve the desired condition?"

To know more Centripetal Acceleration check out:

https://brainly.com/question/14465119

#SPJ4

an ideal fluid flows from left to right through this horizontal pipe, whose interior is hidden. a higher fluid level in the vertical pipes indicates a higher pressure inside the horizontal pipe. at which point does the pipe have the smallest inner diameter?

Answers

The pipe at point b will have the least inner diameter based on the supplied statement.

A fluid is what in physics?

Any liquid, gas, or substance in general that, while under stress, changes form continuously and is incapable of withstanding tangential or shearing forces.

Briefing:

Pipe size and water pressure are related in a moisture pipeline. Because if a pipe's diameter is reduced, the pressure inside the pipeline will rise. According to Bernoulli equation, pressure may be decreased by decreasing the area on conveyance. As a result, there is a high pressure at B and a low diameter at B.

To know more about Fluid visit:

https://brainly.com/question/17123802

#SPJ4

The complete question is-

An ideal fluid flows from left to right through this horizontal pipe, whose interior is hidden. A higher fluid level in the vertical pipes indicates a higher pressure inside the horizontal pipe. At which point does the pipe have the smallest inner diameter? (A higher fluid level in the vertical pipes indicates a higher pressure inside the horizontal pipe).

(A). Point a

(B). Point b

(C). Point c

(D). The diameter doesn't change

(E). We can't determine the diameter of the pipe.

a ground wire is an essential component for a circuit breaker. please select the best answer from the choices provided t f

Answers

It is false to say that a ground wire is an essential component for a circuit breaker. So, given statement is false.

The reason for why it is off-base on the grounds is  that the seriousness of an electric shock relies upon how much flow streaming in it, not on the sort of material by which it is made. An electrical switch is an electrical wellbeing gadget intended to shield an electrical circuit from harm brought about by an overcurrent or cut off. Its essential capability is to hinder current stream to safeguard hardware and to forestall the gamble of fire.

Dissimilar to a wire, which works once and afterward should be supplanted, an electrical switch can be reset (either physically or naturally) to continue typical activity.

Circuit breakers are made in changing sizes, from little gadgets that safeguard low-current circuits or individual domestic devices, to huge switchgear intended to safeguard high voltage circuits taking care of a whole city. The conventional capability of an electrical switch, or circuit, as a programmed method for eliminating power from a broken framework, is frequently truncated as OCPD (Over Flow Insurance Gadget).

Hence, given statement is false.

To know more about Circuit breakers, visit here:

https://brainly.com/question/17040163

#SPJ4

(a) what is the period of small-angle oscillations of a simple pendulum with a mass of 0.6 kg at the end of a string of length 5 m?

Answers

Answer:

T = 2 π (L / g)^1/2

T = 6.28 (5 m / 9.80 m/s^2)^1/2

T = 4.49 sec     (the period is not dependent on mass)

What is the momentum of a golf ball with a mass of 62 g moving at 73 m/s? if the impact between the ball and club lasted for 2. 0 x 10-3 s, what force acted on the ball?.

Answers

The final answer is:

A) momentum = 4.53 kgm/s

B) Force = 2263 J

Given:

mass = 62 g = 0.062 kg

velocity = 73 m/s

Impact lasted = 2 × 10⁻³

A) The momentum of an object can be found by using the formula

momentum = mass × velocity

From the question

mass = 62 g = 0.062 kg

velocity = 73 m/s

We have

momentum = 0.062 × 73 = 4.526

momentum = 4.53 kgm/s

B) To find the force on the ball,

We can use the formula as:

force= (62/1000) × [73-0/(2 × 10⁻³)]

force = 2263 J

Therefore the momentum of the ball is 4.53 kgm/s and the force is 2263 J.

To know more about momentum, refer: https://brainly.com/question/13647442

#SPJ4

what power, in watts, is supplied by the force pushing up on the man? (ignore gains or losses in kinetic energy.)

Answers

The Power power, in watts, is supplied by the force pushing up on the man is 1165.44 W.

How do you calculate power delivered by a force?Power can be characterized as the speed at which work is completed or energy is consumed. Since one unit of energy must be required to perform one unit of labor, these two definitions are identical. It is frequently practical to compute the average power.Work is the result of a force creating a displacement. The length of time that this force exerts to generate the displacement has nothing to do with work. The pace of the process can vary from being completed quickly to taking a while. A rock climber, for instance, takes an unusually lengthy time to raise her body a few meters up the cliff's edge.

a) Power P = Work done(W)/time taken(t)

= [tex]\frac{mgh}{t}[/tex]

= [tex]\frac{(74.7)(9.8)(19.9)}{12.5}[/tex]

= 1165.44 W

b) Let the Power expended by his body be P'

We have (0.412)P' = P

⇒ P' = [tex]\frac{P}{0.412}[/tex] = ([tex]\frac{1165.44}{0.412}[/tex]) = 2828.74 W

To learn more about power, refer to

https://brainly.com/question/24858512

#SPJ4

the temperature of an object is 172°c. what is the peak wavelength (in µm) of the radiation emitted by the object at this temperature?

Answers

The temperature of an object is 172°c. what is the peak wavelength (in µm) of the radiation emitted by the object at this temperature is 6.5101 μm.

The link between a blackbody's temperature and the wavelength at which it emits the most light is known as Wien's law, commonly referred to as Wien's displacement law.

According to Weins Equation spectral radiance of black-body radiation per unit wavelength, peaks at the wavelength λpeak given by:

λ(peak) = b/T

where T is the absolute temperature. b is a constant of proportionality. So the higher the temperature, the shorter or smaller the wavelength of the thermal radiation. The lower the temperature, the longer or larger the wavelength of the thermal radiation.

Now, T= 172+ 273.15 = 445.15 K
λ(peak)= 2898 μm⋅K/445.15 K    (As value of b is 2898 μm)

λ(peak) = 6.5101 μm

Therefore, peak wavelength of the radiation is 6.5101 μm.

To learn more Wein's Law visit:

https://brainly.com/question/28168822

#SPJ4

Radio waves travel through empty space
-faster than visible light.
-slower than visible light.
-at the speed of visible light.
-with only electric fields and not magnetic fields.

Answers

Compared to visible light, radio waves are less energetic and move more slowly.

The speed of light, which is roughly 186,000 miles per second, is what radio waves move at. In other words, light may go farther than the entire globe in the same amount of time that radio waves take to cover the distance of a football field. The speed and energy of radio waves would be slower than those of visible light. Compared to radio waves, visible light would have a shorter wavelength and lesser energy. The speed of radio waves and the speed of light in the visible spectrum are identical. In a vacuum, they both move at a speed of 3 108 3 10 8 metres per second. The visible light that our eyes detect is electromagnetic radiation of this kind. The researchers claim that they can make the wave travel faster than the speed of light by carefully adjusting the frequency of the voltage and the phase displacement. The fastest rate of charge transmission, however, is slower than the speed of light.

To learn more about energetic  please click on below link

https://brainly.com/question/15597525

#SPJ4

the technology that allows engineers to penetrate rock at multiple angles instead of simply a straight line is called(1 point)

Answers

Answer: Directional Drilling and Tunneling

Explanation:

The method used by engineers to pierce rock at angles other than just a straight line is known as directional drilling.

What is Directional drilling?

Directional drilling is defined as the practice of accessing an underground oil or gas reserve by drilling in a non-vertical direction where directional drilling is also called directional boring. Directional drilling increases the efficiency of oil and gas extraction, and can also reduce the environmental impact of drilling.

Drills are primarily used in woodworking, metalworking, construction, machine tool fabrication, construction, and utility projects. Specially designed versions have been made for miniature applications.

Thus, the method used by engineers to pierce rock at angles other than just a straight line is known as directional drilling.

Learn more about Directional drilling, here:

https://brainly.com/question/29849990

#SPJ2

Other Questions
what makes the visible light microspectrophotometer a useful tool with which to analyze fibers the pyrolysis products generated are used to chemically identify polymer type. FILL IN THE BLANK. A recession tends to cause the federal budget deficit to _________ because tax revenues ______ and government spending on transfer payments ________. a student is writing a paper on trends in corporal punishment. they should make which point? The sum of two numbers is 19. The second number is 2 more than twice the first number. 9.11 viscous fluid flows past a flat plate such that theboundary layer thickness at a distance 1.3 m from the leading edgeis 12 mm. determine the boundary layer thickness at distances of0.20, 2.0, and 20 m from the leading edge. assume laminar flow. (b)if the upstream velocity of the flow in part (a) is u 1.5 m/s,determine the kinematic viscosity of the fluid. the reagan administration took steps to redress the so-called gender gap, which referred to the fact that A 50 kg ice skater moving at 6 m/s collides with a second stationary skater with mass 70 kg. The skaters cling together after the collision and move without friction. compute their speed after the collision. what are the ways that immigrants contribute to the social, cultural, and economic vitality of communities today and in the future? a typical operon contains several regions. in which region does a regulator protein bind? group of answer choices a sample in a spectrophotometer gives a percent transmittance of 37.5 %. what is the absorbance of the sample? 0.02877 g sample of gas occupies 10.0 ml at 289.0 k and 1.10 atm. upon further analysis, the compound is found to be 38.734% c and 61.266% f. what is the molecular formula of the compound? molecular formula: draw the lewis structure of the compound. identify the geometry around each carbon atom. bent tetrahedral linear trigonal pyramidal trigonal planar is this compound polar? the compound is polar. the compound is nonpolar. the nurse is assessing a client admitted with diabetic ketoacidosis. which statement made by the client indicates a need for further education on sick day management? Businesses can reduce income inequality by which action?Adjust minimum wage laws to increase worker pay.Pass a new tax law that benefits workers.Provide very high executive compensation.Commit to paying a living wage to all employees. a virus mutates, and therefore it has which of the following traits of living things?(1 point) responses it uses energy. it uses energy. it is made of cells. it is made of cells. it evolves. it evolves. it grows and develops. What are the limitations for freedom of speech? an equipment bought four years ago for $4 comma 760 has a current market value of $2 comma 380 . if kept for one more year, it will cost $1 comma 700 in operation and maintenance costs and will have a market value of $1 comma 950 at the end of the year. in conducting a replacement analysis for the equipment, which of those cash flows can be considered a sunk cost? the third stage of the demographic transition is characterized by a slowing of population growth. what is the crucial factor in a nation reaching stage three? a single-turn square loop of side $l$ is centered on the axis of a long solenoid. in addition, the plane of the square loop is perpendicular to the axis of the solenoid. the solenoid has 1370 turns per meter and a diameter of 7.70 cm, and carries a current of 3.11 a. calculate the magnetic flux through the loop when $l$ in the context of common patterns that can derail classroom management during times of transition, which of the following involves a teacher starting something only to leave it hanging? ton, ta, tes:tu as __ rgle?tu as __ cahiers?tu as __ crayons?tu as __ ordinateur de poche?tu as __ stylo?tu as __ gomme?tu as __ classeur?tu as __ sac?