The normal depth of flow is approximately 0.75 m, the critical depth is approximately 0.37 m, and the flow is sub-critical.
To calculate the normal depth of flow, critical depth, and determine whether the flow is sub-critical or super-critical, we can use the Manning's equation and the concept of critical flow. Here are the steps to solve the problem:
Given data:
Bed width (B) = 2.5 m
Discharge (Q) = 1.75 m^3/s
Chezy coefficient (C) = 60
Slope (S) = 1 in 2000
Calculate the hydraulic radius (R):
The hydraulic radius is the cross-sectional area divided by the wetted perimeter.
In a rectangular channel, the wetted perimeter is equal to the sum of two times the width (2B) and two times the depth (2y).
The cross-sectional area (A) is equal to the width (B) multiplied by the depth (y).
So, the hydraulic radius (R) can be calculated as:
R = A / (2B + 2y)
= (B * y) / (2B + 2y)
= (2.5 * y) / (5 + y)
Calculate the normal depth (y):
For normal flow, the slope of the channel is equal to the energy slope. In this case, the energy slope is given as 1 in 2000.
Using Manning's equation, the relationship between the flow parameters is:
Q = (1 / n) * A * R^(2/3) * S^(1/2)
Rearranging the equation to solve for y:
y = (Q * n^2 / (C * B * sqrt(S)))^(3/5)
Substituting the given values:
y = (1.75 * (60^2) / (60 * 2.5 * sqrt(1/2000)))^(3/5)
= (1.75 * 3600 / (60 * 2.5 * 0.0447))^(3/5)
= (0.0013)^(3/5)
≈ 0.75 m
Therefore, the normal depth of flow is approximately 0.75 m.
Calculate the critical depth (yc):
The critical depth occurs when the specific energy is at a minimum.
For rectangular channels, the critical depth can be calculated using the following formula:
yc = (Q^2 / (g * B^2))^(1/3)
Substituting the given values:
yc = (1.75^2 / (9.81 * 2.5^2))^(1/3)
≈ 0.37 m
Therefore, the critical depth is approximately 0.37 m.
Determine the flow regime:
If the normal depth (y) is greater than the critical depth (yc), the flow is sub-critical. If y is less than yc, the flow is super-critical.
In this case, the normal depth (0.75 m) is greater than the critical depth (0.37 m).
Hence, the flow is sub-critical.
Therefore, the normal depth of flow is approximately 0.75 m, the critical depth is approximately 0.37 m, and the flow is sub-critical.
To learn more about critical depth, visit:
brainly.com/question/16197137
#SPJ4
Naruto buys an LCD TV for $850 using his credit card. The card charges an annual simple interest rate of 13\%. After six months, Naruto decides to pay off the total cost of his TV purchase. How much interest did Naruto pay his credit card company for the purchase of his TV? Select one: a. Naruto paid an interest of $663 b. Naruto paid an interest of $110.5 c. Naruto did not pay any interest, because the interest rate is annual and Naruto paid his card before a year's time of his purchase. d. Naruto paid an interest of $55.25 e. Naruto paid an interest of $905.25
Naruto paid an interest of $55.25 to his credit card company for the purchase of his TV.
The interest Naruto paid for the purchase of his TV can be calculated using the simple interest formula:
Interest = Principal × Rate × Time
In this case, the principal is $850, the rate is 13% (or 0.13 as a decimal), and the time is 6 months (or 0.5 years). Plugging these values into the formula, we get:
Interest = $850 × 0.13 × 0.5 = $55.25
Therefore, Naruto paid an interest of $55.25 to his credit card company for the purchase of his TV.
The correct answer is option d. Naruto paid an interest of $55.25.
It's important to note that in this scenario, Naruto paid off the total cost of the TV after six months. Since the interest rate is annual, the interest is calculated based on the principal amount for the duration of six months. If Naruto had taken longer to pay off the TV or had not paid it off within a year, the interest amount would have been higher. However, in this case, Naruto paid off the TV before a year's time, so the interest amount is relatively low.
Learn more about Credit Card Interest
brainly.com/question/27835357
#SPJ11
a consulting firm records its employees' income against the number of hours worked in the scatterplot shown below. using the best-fit line, which of the following predictions is true? a.) an employee would earn $310 if they work for 7 hours on a project. b.) an employee would earn $730 if they work for 27 hours on a project. c.) an employee would earn $370 if they work for 10 hours on a project. d.) an employee would earn about $470 if they work for 15 hours on a project.
Looking at the graph, the correct answer is in option B; An employee would earn $730 if they work for 27 hours on a project.
What is a scatterplot?A scatterplot is a type of graphical representation that displays the relationship between two numerical variables. It is particularly useful for visualizing the correlation or pattern between two sets of data points.
We can see that we can trace the statement that is correct when we try to match each of the points on the graph. When we do that, we can see that 27 hours can be matched with $730 earnings.
Learn more about scatterplot:https://brainly.com/question/30017616
#SPJ1
d. (1 point) If your data set has a mean, median and mode, which of these measurements must ALWAYS be one of the data values in your set of data? Explain your reasoning. Height data: Using the height data in the EXCEL file, find the following class statistics: a. (3 points) Mean? 357n Median? 3629 Mode? 3629 (write NONE if there is no Mode) b. (1 point) What are the shortest and tallest height values? Shertest: 2722 Fallest c. (1 point) What is the range of the data? 2069 d. (2 point) What is the standard deviation of the height data? (you may use your calculator, an online calculator or Excel to compute this calculation. Space is provided in case you are calculating by hand. Tell me how you calculate it on your calculator or other device if you do not do it by hand. Screen shots of work on the computer will be considered showing work as well.) BIRTH WEIGHT (GRAMS)
The correct answers are:
d)The median is the only measurement that must always be one of the data values in your set of data.
a)Mean = 357n ; Median = 3629 & Mode = 3629
b)Shortest height: 2722 Tallest height: 4791
c)Range = 2069
d)The standard-deviation of the height data is 384.44.
d. If your data set has a mean, median, and mode, the median is the only measurement that must always be one of the data values in your set of data.
This is because the median is the middle value in a data set, so it must be one of the actual data values in order to represent the center of the distribution.
The mean and mode, on the other hand, can be influenced by outliers or skewed data, so they do not necessarily have to be actual data values in the set.
Therefore, the median is the measurement that always represents a true value in the data set.
Given that the height data statistics are:
a. Mean = 357n
Median = 3629
Mode = 3629
b. The shortest and tallest height values are:
Shortest: 2722
Tallest: 4791
c. The range of the data is:
Range = Tallest height – Shortest height
Range = 4791 – 2722
Range = 2069
d. To calculate the standard deviation of the height data:
Using Excel, the standard deviation formula is :
STDEV.P(data range), which gives a result of 384.44.
Therefore, the standard deviation of the height data is 384.44.
To know more about standard-deviation, visit:
brainly.com/question/16290527
#SPJ11
Suppose the revenue (in dollars) from the sale of x units of a product is given by 66x² + 73x 2x + 2 Find the marginal revenue when 45 units are sold. (Round your answer to the nearest dollar.) R(x) = Interpret your result. When 45 units are sold, the projected revenue from the sale of unit 46 would be $
The projected revenue from the sale of unit 46 would be $142,508.
To find the marginal revenue, we first take the derivative of the revenue function R(x):
R'(x) = d/dx(66x² + 73x + 2x + 2)
R'(x) = 132x + 73 + 2
Next, we substitute x = 45 into the marginal revenue function:
R'(45) = 132(45) + 73 + 2
R'(45) = 5940 + 73 + 2
R'(45) = 6015
Therefore, the marginal revenue when 45 units are sold is $6,015.
To estimate the projected revenue from the sale of unit 46, we evaluate the revenue function at x = 46:
R(46) = 66(46)² + 73(46) + 2(46) + 2
R(46) = 66(2116) + 73(46) + 92 + 2
R(46) = 139,056 + 3,358 + 92 + 2
R(46) = 142,508
Hence, the projected revenue from the sale of unit 46 would be $142,508.
For more information on revenue visit: brainly.com/question/28877938
#SPJ11
Suppose we have two integers, and . We define the operation "^" as follows: ^= This operation also is known as exponentiation. Is exponentiation associative? That is, is the following always true? (^)^c=^(^c) Which can be rewritten as ()c=(c) If so, explain why. If not, give a counterexample.
The exponentiation is associative, and the equation `(a^b)^c=a^(b*c)` is correct for all integers.
Suppose there are two integers, `a` and `b`. define the operation "^" as follows: ^= This operation is also known as exponentiation. find out if exponentiation is associative. The following is always true:
`(a^b)^c
=a^(b*c)`
Assume `a=2, b=3,` and `c=4`.
Let's use the above formula to find the left-hand side of the equation:
`(2^3)^4
=8^4
=4096`
Using the same values of `a`, `b`, and `c`, use the formula to calculate the right-hand side of the equation: `2^(3*4)
=2^12
=4096`
The answer to both sides is `4096`, indicating that exponentiation is associative, and the equation `(a^b)^c=a^(b*c)` is correct for all integers.
To learn more about exponentiation
https://brainly.com/question/19961531
#SPJ11
Let U={1,2,3,4,5,6,7,8,9} and A={1}. Find the set A^c. a. {2,4,6,8,9} b. {1,2,3,4} c. {2,3,4,5,6,7,8} d. {2,3,4,5,6,7,8,9}
the correct option is (d) {2, 3, 4, 5, 6, 7, 8, 9}.
The given universal set is U = {1, 2, 3, 4, 5, 6, 7, 8, 9} and A = {1}. We are to find the complement of A.
The complement of A, A' is the set of elements that are not in A but are in the universal set. It is denoted by A'.
Therefore,
A' = {2, 3, 4, 5, 6, 7, 8, 9}
The complement of A is the set of all elements in U that do not belong to A. Since A contains only the element 1, we simply remove this element from U to obtain the complement.
Hence, A' = {2, 3, 4, 5, 6, 7, 8, 9}.
The complement of the set A = {1} is the set of all the remaining elements in the universal set U = {1, 2, 3, 4, 5, 6, 7, 8, 9}.
To know more about universal set visit
https://brainly.com/question/16532444
#SPJ11
The parallelogram-shaped plot of land shown in the figure to the right is put up for sale at $2400 per acre. What is the total price of the land? (Hint: I acre = 43,560 sq ft.) 293 3031 3157
The total price of the parallelogram-shaped plot of land is approximately $4,884, given its area of 88,779 square units and a price of $2400 per acre.
To calculate the area of the parallelogram-shaped plot of land, we can use the formula:
Area = base length * height
Given the base lengths of 303 and 315 units and a height of 293 units, we can substitute these values into the formula:
Area = 303 * 293
Area = 88,779 square units
Now, to convert the area from square units to acres, we divide it by the conversion factor:
Area (in acres) = 88,779 / 43,560
Area (in acres) ≈ 2.035 acres
Finally, to find the total price of the land, we multiply the area in acres by the price per acre, which is $2400:
Total Price = 2.035 acres * $2400/acre
Total Price ≈ $4,884
Therefore, the total price of the land is approximately $4,884.
Learn more about square here: https://brainly.com/question/30556035
#SPJ11
The complete question is:
The parallelogram shaped plot of land shown in the figure to the right is put up for sale at $2400 per acre. What is the total price of the land?given that it has side lengths of 303 units and 315 units, a height of 293 units?
Question 2 < > NASA launches a rocket at t=0 seconds. Its height, in meters above sea-level, as a function of time is given by h(t)=-4.9t² + 139t + 346. Assuming that the rocket will splash down into the ocean, at what time does splashdown occur? The rocket splashes down after seconds. How high above sea-level does the rocket get at its peak? The rocket peaks at meters above sea-level.
The rocket peaks at 906.43 meters above sea-level.
Given: h(t)=-4.9t² + 139t + 346
We know that the rocket will splash down into the ocean means the height of the rocket at splashdown will be 0,
So let's solve the first part of the question to find the time at which splashdown occur.
h(t)=-4.9t² + 139t + 346
Putting h(t) = 0,-4.9t² + 139t + 346 = 0
Multiplying by -10 on both sides,4.9t² - 139t - 346 = 0
Solving the above quadratic equation, we get, t = 28.7 s (approximately)
The rocket will splash down after 28.7 seconds.
Now, to find the height at the peak, we can use the formula t = -b / 2a,
which gives us the time at which the rocket reaches the peak of its flight.
h(t) = -4.9t² + 139t + 346
Differentiating w.r.t t, we get dh/dt = -9.8t + 139
Putting dh/dt = 0 to find the maximum height-9.8t + 139 = 0t = 14.18 s (approximately)
So, the rocket reaches the peak at 14.18 seconds
The height at the peak can be found by putting t = 14.18s in the equation
h(t)=-4.9t² + 139t + 346
h(14.18) = -4.9(14.18)² + 139(14.18) + 346 = 906.43 m
The rocket peaks at 906.43 meters above sea-level.
To find the time at which splashdown occur, we need to put h(t) = 0 in the given function of the height of the rocket, and solve the quadratic equation that results.
The time at which the rocket reaches the peak can be found by calculating the time at which the rate of change of height is 0 (i.e., when the derivative of the height function is 0).
We can then find the height at the peak by plugging in this time into the original height function.
Learn more about function
brainly.com/question/21145944
#SPJ11
Find \( a_{1} \) if \( S_{14}=168 \) and \( a_{14}=25 \)
To find [tex]\( a_{1} \)[/tex] , given that [tex]\( S_{14}=168 \)[/tex] and [tex]\( a_{14}=25 \)[/tex] we can use the formula for the sum of an arithmetic series. By substituting the known values into the formula, we can solve for [tex]a_{1}[/tex].
To find the value of [tex]a_{1}[/tex] we need to determine the formula for the sum of an arithmetic series and then use the given information to solve for [tex]a_{1}[/tex]
The sum of an arithmetic series can be calculated using the formula
[tex]S_{n}[/tex] = [tex]\frac{n}{2} (a_{1} + a_{n} )[/tex] ,
where [tex]s_{n}[/tex] represents the sum of the first n terms [tex]a_{1}[/tex] is the first term, and [tex]a_{n}[/tex] is the nth term.
Given that [tex]\( S_{14}=168 \) and \( a_{14}=25 \)[/tex] we can substitute these values into the formula:
168= (14/2)([tex]a_{1}[/tex] + 25)
Simplifying the equation, we have:
168 = 7([tex]a_{1}[/tex] +25)
Dividing both sides of the equation by 7
24 = [tex]a_{1}[/tex] + 25
Finally, subtracting 25 from both sides of the equation
[tex]a_{1}[/tex] = -1
Therefore, the first term of the arithmetic series is -1.
Learn more about arithmetic series here:
https://brainly.com/question/25277900
#SPJ11
the
expansion of the binomial (x+y)^2a+5 has 20 terms. the value of a
is?
The expansion of the binomial [tex](x+y)^2a+5[/tex] has 20 terms. the value of a
is 7.
To determine the value of "a" in the expansion of the binomial [tex](x+y)^(2a+5)[/tex] with 20 terms, we need to use the concept of binomial expansion and the formula for the number of terms in a binomial expansion.
The formula for the number of terms in a binomial expansion is given by (n + 1), where "n" represents the power of the binomial. In this case, the power of the binomial is (2a + 5). Therefore, we have:
(2a + 5) + 1 = 20
Simplifying the equation:
2a + 6 = 20
Subtracting 6 from both sides:
2a = 20 - 6
2a = 14
Dividing both sides by 2:
a = 14 / 2
a = 7
Therefore, the value of "a" is 7.
Learn more about binomial expansion here:
https://brainly.com/question/31363254
#SPJ11
3. Use the completing the square' method to factorise -3x² + 8x-5 and check the answer by using another method of factorisation.
The roots of the quadratic equation obtained using the quadratic formula method are [tex]$\frac{4}{3}$ and $\frac{5}{3}$.[/tex]
The method used to factorize the expression -3x² + 8x-5 is completing the square method.
That coefficient is half of the coefficient of the x term squared; in this case, it is (8/(-6))^2 = (4/3)^2 = 16/9.
So, we have -3x² + 8x - 5= -3(x^2 - 8x/3 + 16/9 - 5 - 16/9)= -3[(x - 4/3)^2 - 49/9]
By simplifying the above expression, we get the final answer which is: -3(x - 4/3 + 7/3)(x - 4/3 - 7/3)
Now, we can use another method of factorization to check the answer is correct.
Let's use the quadratic formula.
The quadratic formula is given by:
[tex]$$x=\frac{-b \pm \sqrt{b^2-4ac}}{2a}$$[/tex]
Comparing with our expression, we get a=-3, b=8, c=-5
Putting these values in the quadratic formula and solving it, we get
[tex]$x=\frac{-8\pm \sqrt{8^2 - 4(-3)(-5)}}{2(-3)}$[/tex]
which simplifies to:
[tex]$x=\frac{4}{3} \text{ or } x=\frac{5}{3}$[/tex]
Hence, the factors of the given expression are [tex]$(x - 4/3 + 7/3)(x - 4/3 - 7/3)$.[/tex]
The roots of the quadratic equation obtained using the quadratic formula method are [tex]$\frac{4}{3}$ and $\frac{5}{3}$.[/tex]
As we can see, both methods of factorisation gave the same factors, which proves that the answer is correct.
Learn more about quadratic equation
brainly.com/question/29269455
#SPJ11
Use the functions f(x) = -x² + 1 and g(x) = 5x + 1 to answer parts (a)-(g). (a) Solve f(x) = 0. (g) Solve f(x) > 1. (b) Solve g(x) = 0. (c) Solve f(x) = g(x). (d) Solve f(x) > 0. (e) Solve g(x) ≤ 0
a) The solutions to f(x) = 0 are x = 1 and x = -1.
b) the solution to g(x) = 0 is x = -1/5.
C) the right-hand side of this equation is negative for all real values of x, there are no real solutions to f(x) = g(x).
d) the solution to f(x) > 0 is (-∞,0) U (0,∞).
e) We get: f(g(x)) = -25x² - 10x
g) Interval notation, the solution to f(x) > 1 is (-√2,0) U (0,√2).
(a) To solve f(x) = 0, we substitute 0 for f(x) and solve for x:
-f(x)² + 1 = 0
-f(x)² = -1
f(x)² = 1
Taking the square root of both sides, we get:
f(x) = ±1
Therefore, the solutions to f(x) = 0 are x = 1 and x = -1.
(b) To solve g(x) = 0, we substitute 0 for g(x) and solve for x:
5x + 1 = 0
Solving for x, we get:
x = -1/5
Therefore, the solution to g(x) = 0 is x = -1/5.
(c) To solve f(x) = g(x), we substitute the expressions for f(x) and g(x) and solve for x:
-f(x)² + 1 = 5x + 1
Simplifying, we get:
-f(x)² = 5x
Dividing by -1, we get:
f(x)² = -5x
Since the right-hand side of this equation is negative for all real values of x, there are no real solutions to f(x) = g(x).
(d) To solve f(x) > 0, we look for the values of x that make f(x) positive. Since f(x) = -x² + 1, we know that f(x) is a downward-facing parabola with its vertex at (0,1). Therefore, f(x) is positive for all values of x that lie within the interval (-∞,0) or (0,∞). In interval notation, the solution to f(x) > 0 is (-∞,0) U (0,∞).
(e) To solve g(x) ≤ 0, we look for the values of x that make g(x) less than or equal to zero. Since g(x) = 5x + 1, we know that g(x) is a linear function with a positive slope of 5. Therefore, g(x) is less than or equal to zero for all values of x that lie within the interval (-∞,-1/5]. In interval notation, the solution to g(x) ≤ 0 is (-∞,-1/5].
(f) To solve f(g(x)), we substitute the expression for g(x) into f(x):
f(g(x)) = -g(x)² + 1
Substituting the expression for g(x), we get:
f(g(x)) = - (5x + 1)² + 1
Expanding and simplifying, we get:
f(g(x)) = -25x² - 10x
(g) To solve f(x) > 1, we look for the values of x that make f(x) greater than 1. Since f(x) = -x² + 1, we know that f(x) is a downward-facing parabola with its vertex at (0,1). Therefore, f(x) is greater than 1 for all values of x that lie within the intervals (-√2,0) or (0,√2). In interval notation, the solution to f(x) > 1 is (-√2,0) U (0,√2).
Learn more about solutions here:
https://brainly.com/question/29263728
#SPJ11
a pitched roof is built with a 3:8 ratio of rise to span. if the rise of the roof is 9 meters, what is the span?
Answer:
24 meters
Step-by-step explanation:
To find the span of the pitched roof, we can use the given ratio of rise to span. The ratio states that for every 3 units of rise, there are 8 units of span.
Given that the rise of the roof is 9 meters, we can set up a proportion to solve for the span:
(3 units of rise) / (8 units of span) = (9 meters) / (x meters)
Cross-multiplying, we get:
3 * x = 8 * 9
3x = 72
Dividing both sides by 3, we find:
x = 24
Therefore, the span of the pitched roof is 24 meters.
\( y^{142} \frac{e y}{d r}+v^{3} d=1 \quad v(0)=4 \)
Solwe the given initat value problem. The DE is a Bernocili eguation. \[ y^{1 / 7} \frac{d y}{d x}+y^{3 / 2}=1, \quad y(0)=0 \]
The solution to the differential equation is [tex]$y = \left(\frac{7}{2}\left(-\frac{1}{6}y^{\frac{2}{7}} e^{-6x} - \frac{1}{36}e^{-6x}y^{\frac{6}{7}} + \frac{2}{7}\right)\right)^{\frac{1}{5}}$[/tex]
Given DE : [tex]$y^{\frac{1}{7}} \frac{dy}{dx} + y^{\frac{3}{2}} = 1$[/tex] and the initial value y(0) = 0
This is a Bernoulli differential equation. It can be converted to a linear differential equation by substituting[tex]$v = y^{1-7}$[/tex], we get [tex]$\frac{dv}{dx} + (1-7)v = 1- y^{-\frac{1}{2}}$[/tex]
On simplification, [tex]$\frac{dv}{dx} - 6v = y^{-\frac{1}{2}}$[/tex]
The integrating factor [tex]$I = e^{\int -6 dx} = e^{-6x}$On[/tex] multiplying both sides of the equation by I, we get
[tex]$I\frac{dv}{dx} - 6Iv = y^{-\frac{1}{2}}e^{-6x}$[/tex]
Rewriting the LHS,
[tex]$\frac{d}{dx} (Iv) = y^{-\frac{1}{2}}e^{-6x}$[/tex]
On integrating both sides, we get
[tex]$Iv = \int y^{-\frac{1}{2}}e^{-6x}dx + C_1$[/tex]
On substituting back for v, we get
[tex]$y^{1-7} = \int y^{-\frac{1}{2}}e^{-6x}dx + C_1e^{6x}$[/tex]
On simplification, we get
[tex]$y = \left(\int y^{\frac{5}{7}}e^{-6x}dx + C_1e^{6x}\right)^{\frac{1}{5}}$[/tex]
On integrating, we get
[tex]$I = \int y^{\frac{5}{7}}e^{-6x}dx$[/tex]
For finding I, we can use integration by substitution by letting
[tex]$t = y^{\frac{2}{7}}$ and $dt = \frac{2}{7}y^{-\frac{5}{7}}dy$.[/tex]
Then [tex]$I = \frac{7}{2} \int e^{-6x}t dt = \frac{7}{2}\left(-\frac{1}{6}t e^{-6x} - \frac{1}{36}e^{-6x}t^3 + C_2\right)$[/tex]
On substituting [tex]$t = y^{\frac{2}{7}}$, we get$I = \frac{7}{2}\left(-\frac{1}{6}y^{\frac{2}{7}} e^{-6x} - \frac{1}{36}e^{-6x}y^{\frac{6}{7}} + C_2\right)$[/tex]
Finally, substituting for I in the solution, we get the general solution
[tex]$y = \left(\frac{7}{2}\left(-\frac{1}{6}y^{\frac{2}{7}} e^{-6x} - \frac{1}{36}e^{-6x}y^{\frac{6}{7}} + C_2\right) + C_1e^{6x}\right)^{\frac{1}{5}}$[/tex]
On applying the initial condition [tex]$y(0) = 0$[/tex], we get[tex]$C_1 = 0$[/tex]
On applying the initial condition [tex]$y(0) = 0$, we get$C_2 = \frac{2}{7}$[/tex]
So the solution to the differential equation is
[tex]$y = \left(\frac{7}{2}\left(-\frac{1}{6}y^{\frac{2}{7}} e^{-6x} - \frac{1}{36}e^{-6x}y^{\frac{6}{7}} + \frac{2}{7}\right)\right)^{\frac{1}{5}}$[/tex]
Learn more about Bernoulli differential equation:
brainly.com/question/13475703
#SPJ11
If
the average woman burns 8.2 calories per minute while riding a
bicycle, how many calories will she burn if she rides for 35
minutes?
a). 286
b). 287
c). 387
d). 980
33. If the average woman burns \( 8.2 \) calories per minute while riding a bicycle, how many calories will she burn if she rides for 35 minutes? a. 286 b. 287 c. 387 d. 980
The average woman burns 8.2 calories per minute while riding a bicycle. If she rides for 35 minutes, she will burn a total of 287 calories (option b).
To calculate the total number of calories burned, we multiply the number of minutes by the rate of calorie burn per minute. In this case, the woman burns 8.2 calories per minute, and she rides for 35 minutes. So, the total calories burned can be calculated as:
Total calories burned = Rate of calorie burn per minute × Number of minutes
= 8.2 calories/minute × 35 minutes
= 287 calories
Therefore, the correct answer is option b, 287 calories. This calculation assumes a constant rate of calorie burn throughout the duration of the ride.
Learn more about average here:
https://brainly.com/question/30873037
#SPJ11
Plot a line graph in excel I have the 2016 version and it's not working. Please provide all steps and show the dot with points.
X Y
Points Screens Shoes
A 125 0
B 115 15
C 100 30
D 80 45
E 50 60
F 10 75
To create a line graph in Excel 2016 and display data points as dots, enter the data in two columns, select the data range, insert a line graph, add data series for each column, and customize the graph. Right-click on the lines, format data series, and choose marker options to display dots.
to create a line graph in Excel 2016 using the given data. Here's what you need to do:
Step 1: Open Excel and enter the data into two columns. Place the "X" values in column A (Points) and the "Y" values in column B (Screens and Shoes).
Step 2: Select the data range by clicking and dragging to highlight both columns.
Step 3: Go to the "Insert" tab in the Excel menu.
Step 4: In the "Charts" section, click on the "Line" button. Select the first line graph option from the drop-down menu.
Step 5: A basic line graph will be inserted onto your worksheet.
Step 6: Right-click on the graph and select "Select Data" from the context menu.
Step 7: In the "Select Data Source" dialog box, click the "Add" button under "Legend Entries (Series)."
Step 8: In the "Edit Series" dialog box, enter "Points" for the series name, select the data range for the X values (A2:A7), and select the data range for the Y values (B2:B7). Click "OK."
Step 9: Repeat steps 7 and 8 for the second series. Enter "Screens" for the series name, select the data range for the X values (A2:A7), and select the data range for the Y values (B2:B7). Click "OK."
Step 10: Your line graph will now display both series. You can customize the graph by adding titles, labels, and adjusting the formatting as desired.
To add data points as dots, follow these additional steps:
Step 11: Right-click on one of the lines in the graph and select "Format Data Series" from the context menu.
Step 12: In the "Format Data Series" pane, under "Marker Options," select the marker type you prefer, such as "Circle" or "Dot."
Step 13: Adjust the size and fill color of the markers, if desired.
Step 14: Click "Close" to apply the changes.
Your line graph with data points as dots should now be ready.
To know more about graph:
https://brainly.com/question/17267403
#SPJ4
Find fog, go f, and go g. f(x) = 2x, g(x) = x (a) fog (b) gof (c) 9°9
To find the compositions of f(x) = 2x and g(x) = x given in the problem, that is fog, gof, and 9°9, we first need to understand what each of them means. Composition of functions is an operation that takes two functions f(x) and g(x) and creates a new function h(x) such that h(x) = f(g(x)).
For example, if f(x) = 2x and g(x) = x + 1, then their composition, h(x) = f(g(x)) = 2(x + 1) = 2x + 2. Here, we have f(x) = 2x and g(x) = x.(a) fog We can find fog as follows: fog(x) = f(g(x)) = f(x) = 2x
Therefore, fog(x) = 2x.(b) gofWe can find gof as follows: gof(x) = g(f(x)) = g(2x) = 2x
Therefore, gof(x) = 2x.(c) 9°9We cannot find 9°9 because it is not a valid composition of functions
. The symbol ° is typically used to denote composition, but in this case, it is unclear what the functions are that are being composed.
Therefore, we cannot find 9°9. We have found that fog(x) = 2x and gof(x) = 2x.
To know more about functions visit :
https://brainly.com/question/31062578
#SPJ11
what is the probability that either event a and event b will occur? a; 3/19 b; 2/19 middle 10/19 1outside near a 4/19
The probability that either Event A and Event B occur can be determined by calculating the sum of their individual probabilities minus the probability that both events occur simultaneously.
Let's find the probability that Event A occurs first: P(A) = 3/19Next, let's determine the probability that Event B occurs: P(B) = 2/19The probability that both Event A and Event B occur simultaneously can be found as follows: P(A and B) = Middle 10/19Therefore, the probability that either.
Event A or Event B occur can be calculated using the following formula: P(A or B) = P(A) + P(B) - P(A and B)Substituting the values from above, we get:P(A or B) = 3/19 + 2/19 - 10/19P(A or B) = -5/19However, this result is impossible since probabilities are always positive. Hence, there has been an error in the data provided.
To know more about calculating visit:
https://brainly.com/question/30151794
#SPJ11
(15 points) Suppose R is a relation on a set A={1,2,3,4,5,6} such that (1,2),(2,1),(1,3)∈R. Determine if the following properties hold for R. Justify your answer. a) Reflexive b) Symmetric c) Transitive 8. (6 points) A group contains 19 firefighters and 16 police officers. a) In how many ways can 12 individuals from this group be chosen for a committee? b) In how many ways can a president, vice president, and secretary be chosen from this group such that all three are police officers? 9. (6 points) A group contains k men and k women, where k is a positive integer. How many ways are there to arrange these people in a
9. the number of ways to arrange k men and k women in a group is (2k)!.
a) To determine if the relation R is reflexive, we need to check if (a, a) ∈ R for all elements a ∈ A.
In this case, the relation R does not contain any pairs of the form (1, 1), (2, 2), (3, 3), (4, 4), (5, 5), or (6, 6). Therefore, (a, a) ∈ R is not true for all elements a ∈ A, and thus the relation R is not reflexive.
b) To determine if the relation R is symmetric, we need to check if whenever (a, b) ∈ R, then (b, a) ∈ R.
In this case, we have (1, 2) and (2, 1) ∈ R, but we don't have (2, 1) ∈ R. Therefore, the relation R is not symmetric.
c) To determine if the relation R is transitive, we need to check if whenever (a, b) ∈ R and (b, c) ∈ R, then (a, c) ∈ R.
In this case, we have (1, 2) and (2, 1) ∈ R, but we don't have (1, 1) ∈ R. Therefore, the relation R is not transitive.
To summarize:
a) The relation R is not reflexive.
b) The relation R is not symmetric.
c) The relation R is not transitive.
8. a) To choose 12 individuals from a group of 19 firefighters and 16 police officers, we can use the combination formula. The number of ways to choose 12 individuals from a group of 35 individuals is given by:
C(35, 12) = 35! / (12!(35-12)!)
Simplifying the expression, we find:
C(35, 12) = 35! / (12!23!)
b) To choose a president, vice president, and secretary from the group of 16 police officers, we can use the permutation formula. The number of ways to choose these three positions is given by:
P(16, 3) = 16! / (16-3)!
Simplifying the expression, we find:
P(16, 3) = 16! / 13!
9. To arrange k men and k women in a group, we can consider them as separate entities. The total number of people is 2k.
The number of ways to arrange 2k people is given by the factorial of 2k:
(2k)!
To know more about number visit:
brainly.com/question/3589540
#SPJ11
pls help if you can asap!!!!
Answer: x = 8
Step-by-step explanation:
The two lines are of the same length. We can write the equation 11 + 7x = 67 to represent this. We can simplify (solve) this equation by isolating our variable.
11 + 7x = 67 becomes:
7x = 56
We've subtracted 11 from both sides.
We can then isolate x again. By dividing both sides by 7, we get:
x = 8.
Therefore, x = 8.
Evaluate 1∫0 dx/1+x^2. Using Romberg's method. Hence obtain an approximate value of π
Answer:
Step-by-step explanation:
\begin{align*}
T_{1,1} &= \frac{1}{2} (f(0) + f(1)) \\
&= \frac{1}{2} (1 + \frac{1}{2}) \\
&= \frac{3}{4}
\end{align*}
Now, for two subintervals:
\begin{align*}
T_{2,1} &= \frac{1}{4} (f(0) + 2f(1/2) + f(1)) \\
&= \frac{1}{4} \left(1 + 2 \left(\frac{1}{1 + \left(\frac{1}{2}\right)^2}\right) + \frac{1}{1^2}\right) \\
&= \frac{1}{4} \left(1 + 2 \left(\frac{1}{1 + \frac{1}{4}}\right) + 1\right) \\
&= \frac{1}{4} \left(1 + 2 \left(\frac{1}{\frac{5}{4}}\right) + 1\right) \\
&= \frac{1}{4} \left(1 + 2 \cdot \frac{4}{5} + 1\right) \\
&= \frac{1}{4} \left(1 + \frac{8}{5} + 1\right) \\
&= \frac{1}{4} \left(\frac{5}{5} + \frac{8}{5} + \frac{5}{5}\right)
\end{align*}
Thus, the approximate value of the integral using Romberg's method is T_2,1, and this can also be used to obtain an approximate value of π.
To know more about Romberg's method refer here:
https://brainly.com/question/32552896
#SPJ11
Estimate the volume of the solid that lies below the surface z = xy and above the following rectangle. R = (x, y) | 10 ≤ x ≤ 16, 6 ≤ y ≤ 10 (a) Use a Riemann sum with m = 3, n = 2, and take the sample point to be the upper right corner of each square. (b) Use the Midpoint Rule to estimate the volume of the solid.
(a) The volume using the Riemann sum:V ≈ Σ[[tex](x_i * y_i)[/tex] * (Δx * Δy)] for i = 1 to m, j = 1 to n
(b) V ≈ Σ[[tex](x_m * y_m)[/tex] * (Δx * Δy)] for i = 1 to m, j = 1 to n
To estimate the volume of the solid that lies below the surface z = xy and above the given rectangle R = (x, y) | 10 ≤ x ≤ 16, 6 ≤ y ≤ 10, we can use the provided methods: (a) Riemann sum with m = 3, n = 2 using the upper right corner of each square, and (b) Midpoint Rule.
(a) Riemann Sum with Upper Right Corners:
First, let's divide the rectangle R into smaller squares. With m = 3 and n = 2, we have 3 squares in the x-direction and 2 squares in the y-direction.
The width of each x-square is Δx = (16 - 10) / 3 = 2/3.
The height of each y-square is Δy = (10 - 6) / 2 = 2.
Next, we'll evaluate the volume of each square by using the upper right corner as the sample point. The volume of each square is given by the height (Δz) multiplied by the area of the square (Δx * Δy).
For the upper right corner of each square, the coordinates will be [tex](x_i, y_i),[/tex] where:
[tex]x_1[/tex] = 10 + Δx = 10 + (2/3) = 10 2/3
x₂ = 10 + 2Δx = 10 + (2/3) * 2 = 10 4/3
x₃ = 10 + 3Δx = 10 + (2/3) * 3 = 12
y₁ = 6 + Δy = 6 + 2 = 8
y₂ = 6 + 2Δy = 6 + 2 * 2 = 10
Using these coordinates, we can calculate the volume for each square and sum them up to estimate the total volume.
V = Σ[Δz * (Δx * Δy)] for i = 1 to m, j = 1 to n
To calculate Δz, substitute the coordinates [tex](x_i, y_i)[/tex] into the equation z = xy:
Δz = [tex]x_i * y_i[/tex]
Now we can estimate the volume using the Riemann sum:
V ≈ Σ[[tex](x_i * y_i)[/tex] * (Δx * Δy)] for i = 1 to m, j = 1 to n
(b) Midpoint Rule:
The Midpoint Rule estimates the volume by using the midpoint of each square as the sample point. The volume of each square is calculated similarly to the Riemann sum, but with the coordinates of the midpoint of the square.
For the midpoint of each square, the coordinates will be [tex](x_m, y_m)[/tex], where:
[tex]x_m[/tex] = 10 + (i - 1/2)Δx
[tex]y_m[/tex] = 6 + (j - 1/2)Δy
V ≈ Σ[[tex](x_m * y_m)[/tex] * (Δx * Δy)] for i = 1 to m, j = 1 to n
Now that we have the formulas, we can calculate the estimates for both methods.
Learn more about Riemann Sum here:
https://brainly.com/question/30404402
#SPJ11
The height of a model rocket, H(f), is a function of the time since it was
launched, f.
AHD
450-
400-
350
300-
250
200-
150-
100
50-
20
30
Time (seconds)
8
The domain of H(t) is given as follows:
B. 0 ≤ t ≤ 36.
How to obtain the domain and range of a function?The domain of a function is defined as the set containing all the values assumed by the independent variable x of the function, which are also all the input values assumed by the function.The range of a function is defined as the set containing all the values assumed by the dependent variable y of the function, which are also all the output values assumed by the function.The values of x of the graph range from 0 to 36, hence the domain of the function is given as follows:
B. 0 ≤ t ≤ 36.
Learn more about domain and range at https://brainly.com/question/26098895
#SPJ1
Ifind the reference number for each value of \( t \). (a) \( t=\frac{4 \pi}{7} \) (b) \( t=-\frac{7 \pi}{9} \) (c) \( t=-3 \) (d) \( t=5 \)
A reference number is a real number ranging from -1 to 1, representing the angle created when a point is placed on the terminal side of an angle in the standard position. It can be calculated using trigonometric functions sine, cosine, and tangent. For t values of 4π/7, -7π/9, -3, and 5, the reference numbers are 0.50 + 0.86i, -0.62 + 0.78i, -0.99 + 0.14i, and 0.28 - 0.96i.
A reference number is a real number that ranges from -1 to 1. It represents the angle created when a point is placed on the terminal side of an angle in the standard position. The trigonometric functions sine, cosine, and tangent can be used to calculate the reference number.
Let's consider the given values of t. (a) t=47π4(a) We know that the reference angle θ is given by
θ = |t| mod 2π.θ
= (4π/7) mod 2π
= 4π/7
Therefore, the reference angle θ is 4π/7. Now, we can calculate the value of sinθ and cosθ which represent the reference number. sin(4π/7) = 0.86 (approx)cos(4π/7) = 0.50 (approx)Thus, the reference number for t = 4π/7 is cos(4π/7) + i sin(4π/7)
= 0.50 + 0.86i.
(b) t=-79(a) We know that the reference angle θ is given by θ = |t| mod 2π.θ = (7π/9) mod 2π= 7π/9Therefore, the reference angle θ is 7π/9. Now, we can calculate the value of sinθ and cosθ which represent the reference number.sin(7π/9) = 0.78 (approx)cos(7π/9) = -0.62 (approx)Thus, the reference number for
t = -7π/9 is cos(7π/9) + i sin(7π/9)
= -0.62 + 0.78i. (c)
t=-3(b)
We know that the reference angle θ is given by
θ = |t| mod 2π.θ
= 3 mod 2π
= 3
Therefore, the reference angle θ is 3. Now, we can calculate the value of sinθ and cosθ which represent the reference number.sin(3) = 0.14 (approx)cos(3) = -0.99 (approx)Thus, the reference number for t = -3 is cos(3) + i sin(3) = -0.99 + 0.14i. (d) t=5(c) We know that the reference angle θ is given by θ = |t| mod 2π.θ = 5 mod 2π= 5Therefore, the reference angle θ is 5.
Now, we can calculate the value of sinθ and cosθ which represent the reference number.sin(5) = -0.96 (approx)cos(5) = 0.28 (approx)Thus, the reference number for t = 5 is cos(5) + i sin(5)
= 0.28 - 0.96i. Thus, the reference numbers for the given values of t are (a) 0.50 + 0.86i, (b) -0.62 + 0.78i, (c) -0.99 + 0.14i, and (d) 0.28 - 0.96i.
To know more about trigonometric functions Visit:
https://brainly.com/question/25618616
#SPJ11
Compute the maturity value of a 90 day note with a face value of $1000 issued on April 21, 2005 at an interest rate of 5.5%.
Given,Face value (FV) of the note = $1000Issued date = April 21, 2005Rate of interest (r) = 5.5%Time period (t) = 90 daysNow, we have to find the maturity value of the note.To compute the maturity value, we have to find the interest and then add it to the face value (FV) of the note.
To find the interest, we use the formula,Interest (I) = (FV x r x t) / (100 x 365)where t is in days.Putting the given values in the above formula, we get,I = (1000 x 5.5 x 90) / (100 x 365)= 150.14So, the interest on the note is $150.14.Now, the maturity value (MV) of the note is given by,MV = FV + I= $1000 + $150.14= $1150.14Therefore, the maturity value of the note is $1150.14.
On computing the maturity value of a 90-day note with a face value of $1000 issued on April 21, 2005, at an interest rate of 5.5%, it is found that the maturity value of the note is $1150.14.
To know more about maturity value visit
https://brainly.com/question/2132909
#SPJ11
(a) Convert 36° to radians. 7T (b) Convert to degrees. 15 (e) Find an angle coterminal to 25/3 that is between 0 and 27.
(a) 36° is equal to (1/5)π radians.
(b) 15 radians is approximately equal to 859.46°.
(c) The angle coterminal to 25/3 that is between 0 and 27 is approximately 14.616.
(a) To convert 36° to radians, we use the conversion factor that 180° is equal to π radians.
36° = (36/180)π = (1/5)π
(b) To convert 15 radians to degrees, we use the conversion factor that π radians is equal to 180°.
15 radians = 15 * (180/π) = 15 * (180/3.14159) ≈ 859.46°
(c) We must add or remove multiples of 2 to 25/3 in order to get an angle coterminal to 25/3 that is between 0 and 27, then we multiply or divide that angle by the necessary range of angles.
25/3 ≈ 8.333
We can add or subtract 2π to get the coterminal angles:
8.333 + 2π ≈ 8.333 + 6.283 ≈ 14.616
8.333 - 2π ≈ 8.333 - 6.283 ≈ 2.050
The angle coterminal to 25/3 that is between 0 and 27 is approximately Between 0 and 27, the angle coterminal to 25/3 is roughly 14.616 degrees.
To learn more about coterminal angle link is here
brainly.com/question/12751685
#SPJ4
Consider the general problem: -(ku')' + cu' + bu = f, 0 Suppose we discretize by the finite element method with 4 elements. On the first and last elements, use linear shape functions, and on the middle two elements, use quadratic shape functions. Sketch the resulting basis functions. What is the structure of the stiffness matrix K (ignoring boundary conditions); that is indicate which entries in K are nonzero.
We need to consider the general problem: \[-(ku')' + cu' + bu = f\]If we discretize by the finite element method with four elements.
On the first and last elements, we use linear shape functions, and on the middle two elements, we use quadratic shape functions. The resulting basis functions are given by:The basis functions ϕ1 and ϕ4 are linear while ϕ2 and ϕ3 are quadratic in nature. These basis functions are such that they follow the property of linearity and quadratic nature on each of the elements.
For the structure of the stiffness matrix K, we need to consider the discrete problem given by \[KU=F\]where U is the vector of nodal values of u, K is the stiffness matrix and F is the load vector. Considering the above equation and assuming constant values of k and c on each of the element we can write\[k_{1}\begin{bmatrix}1 & -1\\-1 & 1\end{bmatrix}+k_{2}\begin{bmatrix}2 & -2 & 1\\-2 & 4 & -2\\1 & -2 & 2\end{bmatrix}+k_{3}\begin{bmatrix}2 & -1\\-1 & 1\end{bmatrix}\]Here, the subscripts denote the element number. As we can observe, the resulting stiffness matrix K is symmetric and has a banded structure.
The element [1 1] and [2 2] are common to two elements while all the other elements are present on a single element only. Hence, we have four elements with five degrees of freedom. Thus, the stiffness matrix will be a 5 x 5 matrix and the structure of K is as follows:
$$\begin{bmatrix}k_{1}+2k_{2}& -k_{2}& & &\\-k_{2}&k_{2}+2k_{3} & -k_{3} & & \\ & -k_{3} & k_{1}+2k_{2}&-k_{2}& \\ & &-k_{2}& k_{2}+2k_{3}&-k_{3}\\ & & & -k_{3} & k_{3}+k_{2}\end{bmatrix}$$Conclusion:In this question, we considered the general problem given by -(ku')' + cu' + bu = f. We discretized it by the finite element method with four elements. On the first and last elements, we used linear shape functions, and on the middle two elements, we used quadratic shape functions. We sketched the resulting basis functions. The structure of the stiffness matrix K was then determined by ignoring boundary conditions. We observed that it is symmetric and has a banded structure.
To know more about general problem visit
https://brainly.com/question/24486535
#SPJ11
Multiply \( \frac{\sin \theta}{1-\sec \theta} \) by \( \frac{1+\sec \theta}{1+\sec \theta} \). \[ \frac{\sin \theta}{1-\sec \theta} \cdot \frac{1+\sec \theta}{1+\sec \theta}= \] (Simplify yo
The simplified form of the given trigonometric expressions are (sinθ + tanθ)/cos²θ.
Given expressions are
sinθ/(1 - secθ) and (1 + secθ)/(1 - secθ)
To simplify the expressions, we can multiply the numerators and the denominators together,
sinθ × (1 + secθ)/(1 - secθ) × (1 + secθ)
Now simplify the numerator
sinθ × (1 + secθ) = sinθ + sinθ × secθ
Now simplify the denominator
(1 - secθ) × (1 + secθ) = (1 - sec²θ)
We can use the identity (1 - sec²θ) = cos²θ to rewrite the denominator
(1 - secθ) × (1 + secθ) = cos²θ
Putting the simplified numerator and denominator back together, we have
= (sinθ + sinθsecθ)/cos²θ
We can simplify this expression further. Let's factor out a common factor of sinθ from the numerator
= sinθ(1 + secθ)/cos²θ
Use the identity secθ = 1/cosθ, rewrite the numerator as
= sinθ(1 + 1/cosθ)/cos²θ
= (sinθ + sinθ/cosθ)/cos²θ
Use the identity sinθ/cosθ = tanθ
= (sinθ + tanθ)/cos²θ
To know more about trigonometric expressions here
https://brainly.com/question/12676341
#SPJ4
7. a) A computer program generates a random integer number from 1 to 20. If it generates 4
numbers, what is the probability that all 4 numbers to be greater than 10? (2 Marks)
(Independent Probability)
b) A bag containing 20 balls numbered 1 to 20, what is the probability to take out 4 random balls
at once and all 4 of them to be numbers greater than 10? (2 Marks)
(Dependent Probability)
The probability that all four numbers generated by the computer program are greater than 10 is 1/16. This is obtained by multiplying the individual probabilities of each number being greater than 10, which is 1/2. The probability of randomly selecting four balls, one at a time, from a bag containing 20 balls numbered 1 to 20, and having all four of them be numbers greater than 10 is 168/517.
a) For each number generated by the computer program, the probability of it being greater than 10 is 10/20 = 1/2, since there are 10 numbers out of the total 20 that are greater than 10. Since the numbers are generated independently, the probability of all four numbers being greater than 10 is (1/2)^4 = 1/16.
b) When taking out the balls from the bag, the probability of the first ball being greater than 10 is 10/20 = 1/2. After removing one ball, there are 19 balls left in the bag, and the probability of the second ball being greater than 10 is 9/19.
Similarly, the probability of the third ball being greater than 10 is 8/18, and the probability of the fourth ball being greater than 10 is 7/17. Since the events are dependent, we multiply the probabilities together: (1/2) * (9/19) * (8/18) * (7/17) = 168/517.
Note: The probability in part b) assumes sampling without replacement, meaning once a ball is selected, it is not put back into the bag before the next selection.
To know more about probability refer here:
https://brainly.com/question/31828911#
#SPJ11
Devise a method of measuring the IV and DV for RQ using existing data, experimentation, and / or survey research. This method should be developed comprehensively – i.e., existing data sources are conveyed step-by-step, all aspects of the experimental process are outlined specifically, survey questions and option choices provided.
By combining the approaches, researchers can gather comprehensive data, analyze existing information, conduct controlled experiments, and obtain direct responses through surveys.
Existing Data Analysis: Begin by collecting relevant existing data from reliable sources, such as research studies, government databases, or publicly available datasets. Identify variables related to the research question and extract the necessary data for analysis. Use statistical tools and techniques to examine the relationship between the IV and DV based on the existing data.
Experimentation: Design and conduct experiments to measure the IV and its impact on the DV. Clearly define the experimental conditions and variables, including the manipulation of the IV and the measurement of the resulting changes in the DV. Ensure appropriate control groups and randomization to minimize biases and confounding factors.
Survey Research: Develop a survey questionnaire to gather data directly from participants. Formulate specific questions that capture the IV and DV variables. Include options or response choices that cover a range of possibilities for the IV and capture the variations in the DV. Ensure the survey questions are clear, unbiased, and appropriately structured to elicit relevant responses.
Learn more about measuring here : brainly.com/question/28913275
#SPJ11