A quantity of Xe occupies 321 mL at 300 oC and 2.09 atm. What will be the temperature if the volume is increased to 553 mL at 305 torr?259 K586 K134 K189.5 K306 K

The compound Ni(NO2)2 is composed of two different ions, a cation and an anion.

The cation in this compound is nickel (Ni) and the anion is nitrite (NO2). The nickel cation has a charge of +2, which is balanced by the two nitrite anions, each with a charge of -1. The overall charge of the compound must be neutral, so the two charges of the nitrite anions cancel out the charge of the nickel cation. Therefore, the cation formula for Ni(NO2)2 is Ni2+ and the anion formula is NO2-. The nitrite anion is a polyatomic ion consisting of one nitrogen atom and two oxygen atoms.

It is important to note that although Ni(NO2)2 is considered an ionic compound, the nitrite anion is a covalent compound due to the sharing of electrons between the nitrogen and oxygen atoms. However, when combined with the positively charged nickel cation, it forms an ionic compound.

To know more about  anion visit

https://brainly.com/question/29753623

#SPJ11

These microscale procedures are crucial in isolating pure isopentyl acetate from the reaction mixture, and they help to remove unwanted impurities and byproducts, ensuring a high-quality product.

To isolate pure isopentyl acetate from the reaction mixture, the following microscale procedures need to be followed:
1. Granular anhydrous sodium sulfate should be added to the aqueous layer to deprotonate unreacted acetic acid, making a water-soluble salt. The lower aqueous layer should be removed using a Pasteur pipette and discarded.
2. This step ensures that the evolution of carbon dioxide gas is complete.
3. The lower aqueous layer should be removed using a Pasteur pipette, and the organic layer should be discarded to remove byproducts.
4. Water should be removed from the product by drying the organic layer over granular anhydrous sodium sulfate. The dry ester should be decanted using a Pasteur pipette to a clean conical vial.
5. The mixture should be stirred, capped, and gently shaken with frequent venting to separate sodium sulfate from the ester. Aqueous sodium bicarbonate should be added to the reaction mixture to facilitate this step.
Overall, these microscale procedures are crucial in isolating pure isopentyl acetate from the reaction mixture, and they help to remove unwanted impurities and byproducts, ensuring a high-quality product.

To know more about anhydrous sodium sulfate visit :

https://brainly.com/question/30430300

#SPJ11

Therefore, three of the molecules (CF4, XeF4, and PF5) are nonpolar, while two of them (SF4 and IF5) are polar.

To determine whether a molecule is polar or nonpolar, we need to consider its molecular geometry and the polarity of its individual bonds. If a molecule has all of its bonds arranged symmetrically around its central atom, then it is nonpolar. If, however, the bonds are arranged asymmetrically, then the molecule will be polar.

Looking at the molecules in the question, we can determine their molecular geometry as follows:

- CF4: Tetrahedral
- SF4: See-saw
- XeF4: Square planar
- PF5: Trigonal bipyramidal
- IF5: Octahedral

Using this information, we can predict whether each molecule is polar or nonpolar:

- CF4: Nonpolar - All of the bonds are arranged symmetrically around the central carbon atom.
- SF4: Polar - The molecule has a see-saw shape, which means that the fluorine atoms are not arranged symmetrically around the central sulfur atom. The lone pair of electrons on sulfur also contributes to the molecule's polarity.
- XeF4: Nonpolar - Although the molecule has a square planar shape, all of the bonds are arranged symmetrically around the central xenon atom.
- PF5: Nonpolar - The molecule has a trigonal bipyramidal shape, which means that the five fluorine atoms are arranged symmetrically around the central phosphorus atom.
- IF5: Polar - The molecule has an octahedral shape, but the iodine atoms are not arranged symmetrically around the central iodine atom. The lone pair of electrons on the central iodine atom also contributes to the molecule's polarity.

To know more about molecules visit:-

https://brainly.com/question/19556990

#SPJ11

The given statement if the carbon dioxide gas is captured in the bottle, the product is called table wine is False .

Table wine refers to still wine without significant carbonation. Sparkling wine, such as Champagne, has noticeable carbon dioxide bubbles, which are often captured in the bottle during the fermentation process. Whether or not a wine is considered table wine has nothing to do with whether carbon dioxide gas is captured in the bottle. Table wine is a term used to describe still wine that contains between 7% and 14% alcohol by volume (ABV). Wines with higher ABV are typically classified as dessert wines or fortified wines.

Sparkling wine, on the other hand, is wine that contains significant amounts of dissolved carbon dioxide, resulting in bubbles and a fizzy texture. This can be achieved through a secondary fermentation in the bottle or tank, or by adding carbon dioxide artificially.

Therefore, capturing carbon dioxide gas in a bottle alone is not enough to determine whether a wine is table wine or not. Hence, If the carbon dioxide gas is captured in the bottle, the product is not called table wine; instead, it is called sparkling wine.

To know more about table wine refer here :

https://brainly.com/question/16975086

#SPJ11

After 60 days, the amount of cesium-131 that remains is option (c) 1.4% of the original sample.

The half-life of cesium-131 is 9.7 days, which means that after 9.7 days, half of the initial amount of the sample remains. After another 9.7 days (total of 19.4 days), half of that remaining amount remains, and so on.

To find the percent of the sample that remains after 60 days, we can divide 60 by 9.7 to get the number of half-life periods that have elapsed:

60 days / 9.7 days per half-life = 6.19 half-life periods

This means that the initial sample has undergone 6 half-life periods, so only 1/2⁶ = 1.5625% of the initial sample remains. Therefore, the answer is c) 1.4%.

To know more about the cesium-131 refer here :

https://brainly.com/question/24292973#

#SPJ11

the answer is (d) 1.5 mol.

Under standard conditions, which are defined as 1 atmosphere (101.325 kPa) and 0°C (273.15 K), the molar volume of an ideal gas is 22.4 L.

Therefore, if a diatomic ideal gas occupies 33.6 L under standard conditions, the number of moles of gas in the sample can be calculated as follows:

n = V / Vm

where n is the number of moles, V is the volume of the gas, and Vm is the molar volume of the gas at standard conditions.

Substituting the given values, we get:

n = 33.6 L / 22.4 L/mol = 1.5 mol

To know more about conditions refer here

https://brainly.com/question/29418564#

#SPJ11

The weight of fat, in pounds, of an 82-kg athlete with 14% body fat by mass is 25.31 lb.

Given,

The percentage of body fat by mass = 14%

Weight of the athlete = 82 kg

Now we need to calculate the weight of fat in pounds of the athlete.

Let's use the following conversion factors,1 kg = 2.205 lb1% = 0.01

Thus,

The weight of fat = Percentage of body fat by mass × Weight of the athlete

= 14% × 82 kg

= 0.14 × 82 kg

= 11.48 kg

Now we need to convert kg to pounds,

11.48 kg = 11.48 kg × 2.205 lb/kg = 25.31 lb

To learn more about body fat by mass, refer:-

https://brainly.com/question/18987770

#SPJ11

Different lines are used in sketches of possible solutions to represent various elements, features, or conditions in a clear and organized manner.

Differentiating components: Different lines help to distinguish between different components or objects in a sketch. For example, solid lines may represent the main parts or visible surfaces, while dashed or dotted lines may indicate hidden or obscured elements.

Showing dimensions: Lines with specific patterns, such as arrows or tick marks, are used to indicate dimensions in a sketch. These lines help provide measurements and convey the size, length, or height of various features accurately.

Depicting movement or alignment: Lines can also be used to represent movement, paths, or alignments. For instance, curved lines might indicate flow or rotation, while straight lines can show linear motion or alignment of elements.

Indicating different materials or sections: Differently styled lines, such as cross-hatching or stippling, are often employed to represent different materials or sections in a sketch. This helps to communicate distinctions in textures, materials, or cross-sectional views.

Learn more about sketches of possible solutions here

https://brainly.com/question/4638576

#SPJ11

The reaction of 4-pentanoylbiphenyl and hydrazine without potassium hydroxide is a net addition reaction. The correct option is b.

When 4-pentanoylbiphenyl reacts with hydrazine in the absence of potassium hydroxide, the carbonyl group of the 4-pentanoylbiphenyl undergoes addition reaction with hydrazine to form a hydrazone product. This is an example of a net addition reaction, where two molecules combine to form a single product.

The reaction does not involve the substitution of any functional groups, rearrangement of atoms or elimination of any functional group. The absence of potassium hydroxide in the reaction mixture does not influence the mechanism of the reaction but rather affects the rate of reaction. Potassium hydroxide is often used as a catalyst in the reaction to increase the rate of the reaction. Therefore, the correct option is b.

To know more about catalyst refer here:

https://brainly.com/question/31630881#

#SPJ11

The first step to finding the Ka of the acid HA is to write the equation for its ionization: The Ka of the acid HA is 2.8 × 10^-4

HA(aq) + H2O(l) ↔ A^-(aq) + H3O^+(aq)

The equilibrium expression for this reaction is:

Ka = [A^-][H3O^+] / [HA]

We know that the initial concentration of HA is 0.059 M, and the pH of the solution is 2.36. From the pH, we can find the concentration of H3O^+ using the equation:

pH = -log[H3O^+]

2.36 = -log[H3O^+]

[H3O^+] = 10^-2.36 = 4.06 × 10^-3 M

Since the acid HA is a weak acid, we can assume that the concentration of A^- is negligible compared to the concentration of HA. Therefore, we can assume that the concentration of HA is equal to its initial concentration of 0.059 M.

We can plug these values into the equilibrium expression for Ka:

Ka = [A^-][H3O^+] / [HA]

Ka = (0)(4.06 × 10^-3) / 0.059

Ka = 2.75 × 10^-4

Click the below link, to learn more about Ka of acid:

https://brainly.com/question/14620228

#SPJ11

The pH of the buffer solution made by adding 0.010 mole of solid naf to 50. ml of0.40 m hf is 3.16.

The Henderson-Hasselbalch equation, which links the pH of a buffer solution to the dissociation constant (Ka) of the weak acid and the ratio of its conjugate base to acid, must be used to calculate the pH of the buffer solution created by adding 0.010 mole of solid NaF to 50 ml of 0.40 M HF.Calculating the concentration of HF and NaF in the solution following the addition of solid NaF is the first step. The new concentration of HF may be determined using the initial concentration and the quantity of HF present before and after the addition of NaF because the volume of the solution remains constant: Amount of HF in moles prior to addition = 0.40 M x 0.050  = 0.02 moles After addition, the amount of HF is equal to 0.02 moles minus 0.01 moles.

New HF concentration is equal to 0.01 moles per 0.050 litres, or 0.20 M.

The amount of NaF added divided by the total volume of the solution gives the solution's concentration in NaF.NaF concentration: 0.010 moles per 0.050 litres, or 0.20 M. The Henderson-Hasselbalch equation is now applicable: pH equals pKa plus log([A-]/[HA]). where [A-] is the concentration of the conjugate base (NaF), [HA] is the concentration of the weak acid (HF), and [pKa] is the negative logarithm of the dissociation constant of HF (pKa = -log(Ka) = -log(6.9x10-4) = 3.16).

For more such questions on solid

https://brainly.com/question/23864332

#SPJ11

Answer: No, essential fatty acids have a significant impact on human health.

Explanation:

These fatty acids are crucial for maintaining proper brain function, skin health, and reducing inflammation throughout the body. They also play a role in regulating blood pressure and supporting cardiovascular health. While our bodies can produce some fatty acids, essential fatty acids must be obtained through the diet. Therefore, it's important to ensure adequate intake of these beneficial fats for optimal health.
Essential fatty acids have more than minimal impact on human health. These acids, such as omega-3 and omega-6 fatty acids, play crucial roles in numerous bodily functions, including supporting brain health, immune function, and maintaining cell membrane integrity. Since the human body cannot produce these essential fatty acids, they must be obtained through diet to ensure optimal health.

To know more about fatty acids, visit:

https://brainly.com/question/31972101

#SPJ11

To calculate the mean and standard deviation for the given data, follow these steps: The mean of the given data is approximately 5.383, and the standard deviation is approximately 0.138.

Calculate the mean (average) of the data.

Mean = (5.554 + 5.560 + 5.225 + 5.132 + 5.441 + 5.389 + 5.288) / 7

Let's perform the calculations:

Step 1: Mean

Mean = (5.554 + 5.560 + 5.225 + 5.132 + 5.441 + 5.389 + 5.288) / 7

Mean = 5.383

Step 2: Standard Deviation

(5.554 - 5.383), (5.560 - 5.383), (5.225 - 5.383), (5.132 - 5.383), (5.441 - 5.383), (5.389 - 5.383), (5.288 - 5.383)

b) Square each difference:

(0.171)², (0.177)², (-0.158)², (-0.251)², (0.058)², (0.006)², (-0.095)²

c) Calculate the mean of the squared differences:

Mean of squared differences = (0.171² + 0.177² + (-0.158)² + (-0.251)² + 0.058² + 0.006² + (-0.095)²) / 7

d) Take the square root of the mean of squared differences:

Mean of squared differences = (0.029 + 0.031 + 0.025 + 0.063 + 0.003 + 0.000 + 0.009) / 7

Mean of squared differences = 0.019

Standard Deviation ≈ 0.138

Therefore, the mean of the given data is approximately 5.383, and the standard deviation is approximately 0.138.

To learn more about  standard deviation  

brainly.com/question/29115611

#SPJ4

The sum of 0.0853, 0.05477, and 0.0002, reported to be the correct number of significant figures, is 0.14.

When performing addition or subtraction with numbers, it is important to consider the significant figures in the given values and report the final answer with the appropriate number of significant figures. In this case, the number 0.0853 has four significant figures, 0.05477 has five significant figures, and 0.0002 has only one significant figure.

To determine the correct number of significant figures in the sum, we need to consider the least precise value, which is 0.0002 with one significant figure. Therefore, the final answer should also have one significant figure. Adding up the given values, we get 0.14 as the sum, which is reported to be one significant figure.

Learn more about significant figures here:

https://brainly.com/question/29153641

#SPJ11

Protein structures consist of four levels: primary, secondary, tertiary, and quaternary.

The secondary structure elements are also present in ovalbumin but do                     not have unique features. The protein does not form quaternary structures, as it functions as a single polypeptide chain.

Know more about Structure of protein here:

brainly.com/question/14652022

#SPJ11

A piece of pie rated at 400 calories is equivalent to 1674.4 calories of thermal energy or 7009.6 joules of mechanical energy.

The calorie is a unit of energy commonly used to measure the energy content of food. One calorie is defined as the amount of energy needed to raise the temperature of one gram of water by one degree Celsius. However, in physics, the unit for energy is the joule. One calorie is equal to 4.184 joules.

When we consume food, the body metabolizes it to release energy in the form of ATP, which is used by the body for various physiological processes. The amount of energy released by the food is equivalent to the amount of calories it contains.

In physics, energy can take many forms, including thermal energy and mechanical energy. Thermal energy refers to the energy associated with the temperature of an object, while mechanical energy refers to the energy associated with the motion or position of an object.

To convert the 400 calories of energy in the pie to thermal energy, we simply multiply it by the conversion factor of 4.184. This gives us 1674.4 calories of thermal energy.

To convert the 400 calories of energy in the pie to mechanical energy, we need to consider the efficiency of the body in converting food energy to mechanical energy. The human body is not very efficient in this regard, with only about 20-25% of the energy in food being converted to mechanical energy.

Therefore, to convert the 400 calories of energy in the pie to mechanical energy, we need to multiply it by the efficiency factor of 0.25. This gives us 100 calories of mechanical energy, which is equivalent to 7009.6 joules.

In summary, the 400 calories of energy in a piece of pie can be converted to 1674.4 calories of thermal energy or 7009.6 joules of mechanical energy. This demonstrates the importance of understanding the unit of energy being used in a particular context, and the conversion factors required to convert between different units of energy.

To learn more about calories refer here:

https://brainly.com/question/22374134

#SPJ11

I apologize, but you haven't provided any specific chemical equations for me to generate the balanced chemical reaction, complete ionic equation, and net ionic equation. Please provide the specific chemical equation you would like me to work with.

#SPJ11

Complete question

The E°(overall) value is higher in the presence of ammonia, we can conclude that ammonia is necessary for the formation of the ammine complex.

The two half-reactions involved in this process are:

Co2+ + 2 e- → Co E° = -0.28 V (from the table given in part (a))

H2O2 + 2 H+ + 2 e- → 2 H2O E° = 1.78 V (from the table given in part (a))

To make an ammine complex, we need to add ammonia to the reaction mixture. Ammonia can act as a ligand and coordinate with cobalt. The overall reaction can be written as follows:

CoCl2 + NH3 + H2O2 → [Co(NH3)5(H2O)]3+ + Cl- + H2O

To determine whether ammonia is necessary for the formation of the complex, we can compare the standard reduction potentials for the reaction with and without ammonia.

Without ammonia:

E°(overall) = E°(Co2+/Co) + E°(H2O2/H2O)

E°(overall) = (-0.28 V) + (1.78 V)

E°(overall) = 1.50 V

With ammonia:

E°(overall) = E°(Co3+/Co) + E°(NH3/Co3+) + E°(H2O2/H2O)

E°(overall) = (-0.49 V) + (0.76 V) + (1.78 V)

E°(overall) = 2.05 V

For such more question on ammonia:

https://brainly.com/question/14854495

#SPJ11

The E°(overall) value is higher in the presence of ammonia, we can conclude that ammonia is necessary for the formation of the ammine complex.The two half-reactions involved in this process are:Co2+ + 2 e- → Co E° = -0.28 V (from the table given in part (a))H2O2 + 2 H+ + 2 e- → 2 H2O E° = 1.78 V (from the table given in part (a))To make an ammine complex, we need to add ammonia to the reaction mixture. Ammonia can act as a ligand and coordinate with cobalt. The overall reaction can be written as follows:CoCl2 + NH3 + H2O2 → [Co(NH3)5(H2O)]3+ + Cl- + H2OTo determine whether ammonia is necessary for the formation of the complex, we can compare the standard reduction potentials for the reaction with and without ammonia.Without ammonia:E°(overall) = E°(Co2+/Co) + E°(H2O2/H2O)E°(overall) = (-0.28 V) + (1.78 V)E°(overall) = 1.50 VWith ammonia:E°(overall) = E°(Co3+/Co) + E°(NH3/Co3+) + E°(H2O2/H2O)E°(overall) = (-0.49 V) + (0.76 V) + (1.78 V)E°(overall) = 2.05 V

Learn more about determine here:

brainly.com/question/14854495

#SPJ11

The balanced chemical equation for the reaction between sodium oxalate (Na2C2O4) and potassium permanganate (KMnO4) in acidic solution is:

5Na2C2O4 + 2KMnO4 + 8H2SO4 → 2MnSO4 + 10CO2 + 5Na2SO4 + K2SO4 + 8H2O

In this reaction, sodium oxalate reacts with potassium permanganate in acidic solution. The acid used in this reaction is sulfuric acid (H2SO4). The reaction results in the formation of manganese sulfate (MnSO4), carbon dioxide (CO2), sodium sulfate (Na2SO4), potassium sulfate (K2SO4), and water (H2O).

To balance the equation, we need to ensure that the number of atoms of each element is equal on both sides of the equation. In the balanced equation, we can see that there are 5 moles of Na2C2O4, 2 moles of KMnO4, and 8 moles of H2SO4 on the left-hand side, and 2 moles of MnSO4, 10 moles of CO2, 5 moles of Na2SO4, 1 mole of K2SO4, and 8 moles of H2O on the right-hand side. This ensures that the law of conservation of mass is followed, and no atoms are lost or gained during the reaction.
To know more about sodium oxalate visit

https://brainly.com/question/31800322

#SPJ11

The equilibrium concentration of Ag⁺ and PO₃⁻⁴ are 2.35 x 10⁻⁶ M and 7.05 x 10⁻⁶ M, respectively.

First, we need to write the balanced chemical equation for the precipitation of Ag₃PO₄;

3AgNO₃ + Na₃PO₄ → Ag₃PO₄ + 3NaNO₃

According to the stoichiometry of the equation, 3 moles of AgNO₃ are required to react with 1 mole of Na₃PO₄ to form 1 mole of Ag₃PO₄. So, we need to find out which reactant is limiting.

The number of moles of AgNO₃ present in 0.100 L of 0.270 M solution is:

0.100 L x 0.270 mol/L = 0.027 mol AgNO₃

The number of moles of Na₃PO₄ present in 0.100 L of 1.00 M solution is:

0.100 L x 1.00 mol/L = 0.100 mol Na₃PO₄

According to the stoichiometry of the equation, 0.100 mol Na₃PO₄ would require 0.300 mol AgNO₃ (3 times as many moles). However, we only have 0.027 mol AgNO₃, which is the limiting reactant.

Therefore, all 0.027 mol of AgNO will react to form Ag₃PO₄. The amount of Ag₃PO₄ that will precipitate can be calculated using its solubility product constant (Ksp);

Ksp = [Ag⁺]³ [PO₃⁻⁴]

Ksp = (x)(3x)³ = 8.89 x 10⁻¹⁷

Solving for x gives;

x = [Ag⁺] = 2.35 x 10⁻⁶ M

[PO₃⁻⁴] = 3x = 7.05 x 10⁻⁶ M

Therefore, the concentrations of Ag⁺ is 2.35 x 10⁻⁶ M and the concentration of PO3-4 is 7.05 x 10⁻⁶ M, respectively.

To know more about concentration here

https://brainly.com/question/10725862

#SPJ4

1. The enthalpy change for the reaction is - 104 kJ.

2. The enthalpy change for the reaction is - 138 kJ.

1. The chemical reaction is as :

CH₃Cl(g) + Cl₂(g)  ---->  CH₂Cl₂(g) + HCl(g)

The Bond Energy (kJ/mol)

The bond energy, C-H = 414

The bond energy, Cl - Cl = 243

The bond energy, H-Cl = 431

The bond energy, C-Cl = 330

The enthalpy change is as :

ΔH = ∑ H reactant - ∑ H product

ΔH = ( 3 × Hc-h + Hc-cl  +  Hcl-cl ) - ( 2 × Hc-h + 2 × Hc-cl + Hh-cl)

ΔH = (  3 × 414 + 330 + 243 ) - ( 2 × 414 + 2 × 330 + 431 )

ΔH = - 104 kJ

2. The chemical reaction is :

H₂ + O₂  --->  H₂O₂

The Bond Energy (kJ/mol)

The bond energy, H-H = 436

The bond energy, O=O = 498

The bond energy, O-O = 146

The bond energy, H-O = 463

The enthalpy change is as :

ΔH = ∑ H reactant - ∑ H product

ΔH = ( H-H + O=O ) - ( 2 × O-H + (O-O)

ΔH = ( 436 - 498 ) - (2 ×463 + 146 )

ΔH = - 138 kJ.

To learn more about enthalpy change here

https://brainly.com/question/31979548

#SPJ4

Option b is the correct answer. The other options are not related to the formation of anions by chlorine.

The reason why chlorine atoms like to form -1 charged anions is because of its electron configuration. Chlorine has one electron short of a filled principal quantum number shell, which means it can gain an electron to achieve a stable octet configuration.

                                      This process results in the formation of a negatively charged ion, or an anion, with a charge of -1. The reason why chlorine atoms like to form -1 charged anions is because chlorine's electron configuration is one electron short of a filled principal quantum number shell (option b).

                             When a chlorine atom gains one electron, it achieves a stable electron configuration similar to that of a noble gas, which is energetically favorable. This process results in the formation of a negatively charged anion, Cl-.

Therefore, option b is the correct answer. The other options are not related to the formation of anions by chlorine.

Learn more about electron configuration

brainly.com/question/31812229

#SPJ11

The ranking of the given molecules from weakest to strongest intermolecular forces is:  H2S < H2Se < H2Te < H2PO

This ranking is based on the size, dipole moments, and polarity of each molecule, which are factors that contribute to the strength of their intermolecular forces. Also ranking is based on the trend of increasing atomic size down the group. As we move down the group, the atomic size increases which results in larger electron clouds and hence stronger intermolecular forces. 1. H2S: Weakest intermolecular forces due to its small size and relatively low dipole moment. 2. H2Se: Slightly stronger intermolecular forces than H2S because it has a larger size and a higher dipole moment. 3. H2Te: Stronger intermolecular forces due to its larger size and higher dipole moment compared to H2Se and H2S. 4. H2PO: Strongest intermolecular forces because it has a significant dipole moment, making its overall polarity higher than the other molecules listed.

To know more about molecules visit :-

https://brainly.com/question/21263612

#SPJ11

To find the temperature of a gas system with a volume of 1758 mL and a pressure of 0.84 atm, containing 5.0 mol of gas, we can use the ideal gas law equation PV = nRT.

Where:

P = Pressure (in atm)

V = Volume (in liters)

n = Number of moles

R = Ideal gas constant (0.0821 L·atm/mol·K)

T = Temperature (in Kelvin)

First, we need to convert the volume from milliliters (mL) to liters (L):

V = 1758 mL = 1758 mL / 1000 mL/L = 1.758 L

Next, we can rearrange the ideal gas law equation to solve for temperature:

T = PV / (nR)

Substituting the given values:

T = (0.84 atm) * (1.758 L) / (5.0 mol * 0.0821 L·atm/mol·K)

Calculating this expression gives us:

T = 17.4 K

Therefore, the temperature of the gas system constrained to a volume of 1758 mL, with a pressure of 0.84 atm, and containing 5.0 mol of gas is approximately 17.4 Kelvin.

Learn more about ideal gas law equation  here

https://brainly.com/question/3778152

#SPJ11

Looking at the given compounds, CH₃CHCO and CH₃CHCC have similar base strengths as they both have a carbonyl group with a lone pair of electrons.

So, the correct answer is A.

BrCH₂CH₂CO is a stronger base than CH₃CH₂CO because the electronegative bromine atom pulls electron density away from the carbonyl, making the lone pair of electrons more available.

CH₃CHCH₂CO and CH,CH₂CHCO have similar base strengths as they both have a conjugated system that delocalizes the negative charge.

CH₃CCH₂CH₂₀ is a stronger base than CH,CH₂CCH₂O because the electronegative oxygen atom is more able to donate its lone pair of electrons compared to the electronegative chlorine atom.

Hence the answer of the question is A.

Learn more about strong base at

https://brainly.com/question/13931351

#SPJ11

The vapor pressure in a sealed flask containing 15.0 g of glycerol, C₃H₈O₃, dissolved in 105 g of water at 25.0°c is approximately 23.10 mmHg.

To calculate the vapor pressure in the sealed flask, we need to use the Raoult's Law formula: P_solution = X_water * P_water, where X_water is the mole fraction of water in the solution, and P_water is the vapor pressure of pure water at 25.0°C.

First, calculate the moles of glycerol and water:
- Glycerol (C₃H₈O₃) has a molar mass of 92.09 g/mol: moles of glycerol = 15.0 g / 92.09 g/mol = 0.163 moles
- Water (H₂O) has a molar mass of 18.01 g/mol: moles of water = 105 g / 18.01 g/mol = 5.83 moles

Next, calculate the mole fraction of water (X_water):
X_water = moles of water / (moles of water + moles of glycerol) = 5.83 / (5.83 + 0.163) = 0.973

Now, use the vapor pressure of pure water at 25.0°C, which is approximately 23.76 mmHg:
P_solution = X_water * P_water = 0.973 * 23.76 mmHg = 23.10 mmHg

Thus, the vapor pressure in the sealed flask containing 15.0 g of glycerol is approximately 23.10 mmHg.

Learn more about Raoult's Law here: https://brainly.com/question/28304759

#SPJ11

A noble gas is helium, weighs 980 mg and occupies a volume of 0.270 L at a temperature of 88 °C and a pressure of 975 mmHg.

To determine the identity of the gas, we can use the ideal gas law, which relates the pressure (P), volume (V), temperature (T), and number of moles of gas (n) using the gas constant (R): PV = nRT

We can rearrange this equation to solve for the number of moles: n = PV/RT

Substituting the given values and converting units to SI units: P = 975 mmHg = 129,982.8 Pa

V = 0.270 L = 0.270 x 10^-3 m^3

T = 88 °C = 361.15 K

R = 8.314 J/mol•K

We can calculate the number of moles of gas: n = (129,982.8 Pa x 0.270 x 10^-3 m^3) / (8.314 J/mol•K x 361.15 K) = 0.011 mol

Next, we can calculate the molar mass of the gas: M = mass / n = 980 mg / 0.011 mol = 89 g/mol

The molar mass of helium is 4 g/mol, which is much smaller than the calculated molar mass. Therefore, we can conclude that the gas is helium (He), which is a noble gas and has a molar mass of 4 g/mol.

The ideal gas law is a fundamental equation in thermodynamics that relates the physical properties of a gas to each other. It is an equation of state for a gas, which means that it describes the relationship between the state variables of the gas, such as pressure, volume, and temperature.

The ideal gas law assumes that the gas is composed of particles that are in constant random motion, and that the volume of the particles is negligible compared to the volume of the container. The law also assumes that there are no intermolecular forces between the particles of the gas.

learn more about noble gas here:

https://brainly.com/question/13715159

#SPJ11

The given reaction involves the oxidation of an organic compound by potassium permanganate (KMnO4) in basic medium (OH-). The intermediate formed in this step is an unstable compound that further reacts with H3O+ in acidic medium to form the final product.

To draw the major product of the reaction with the given reagents, follow these steps:
1. The reactant undergoes oxidation using KMnO4 and OH- under warm conditions. This step involves the cleavage of any carbon-carbon double bonds and converting them into carbonyl groups (C=O).
2. The addition of H3O+ in the next step results in the hydration of carbonyl groups, forming geminal diols (two -OH groups on the same carbon).
The major product formed in this reaction is a carboxylic acid. The exact compound formed will depend on the starting material. The reaction of KMnO4 with a primary alcohol forms a carboxylic acid as the major product.
Therefore, the answer to the question "Draw the major product of this reaction. Ignore inorganic byproducts and CO2. o 1. KMnO4, OH- (warm) 2. H3O+" is a carboxylic acid. Without knowing the exact structure of the starting material, I cannot provide a specific structure for the major product. However, the general outcome of the reaction involves the conversion of carbon-carbon double bonds to geminal diols.

To know more about potassium permanganate visit:

https://brainly.com/question/30636651

#SPJ11

The grams of co2 are present in 4.54 grams of cobalt(ii) iodide is 4.57 grams.

To answer this question, we need to know the molar mass of cobalt(II) nitrite, which can be calculated as follows:

Co(NO2)2

Molar mass of Co = 58.93 g/mol

Molar mass of NO2 = 46.01 g/mol (14.01 g/mol for N and 2x16.00 g/mol for O)

Total molar mass = 150.95 g/mol

So, one mole of cobalt(II) nitrite has a mass of 150.95 g.

To find the number of moles of cobalt(II) nitrite in 4.57 grams, we divide the mass by the molar mass:

4.57 g / 150.95 g/mol = 0.030 mol

Now, we can use the balanced chemical equation for the reaction that forms Co2+ and cobalt(II) nitrite to determine the amount of Co2+ that corresponds to 0.030 mol of cobalt(II) nitrite. The equation is:

Co(NO2)2 + 2H2O + O2 → Co2+ + 2NO3- + 2H+

According to the equation, 1 mole of Co(NO2)2 produces 1 mole of Co2+. Therefore, 0.030 mol of Co(NO2)2 will produce 0.030 mol of Co2+.

Finally, we can use the molar mass of Co2+ to convert from moles to grams:

0.030 mol Co2+ x 58.93 g/mol = 1.77 g Co2+

So, 4.57 grams of cobalt(II) nitrite contain 1.77 grams of Co2+.

For such more question on grams:

https://brainly.com/question/30599358

#SPJ11

The grams of co2 are present in 4.54 grams of cobalt(ii) iodide is 4.57 grams.To answer this question, we need to know the molar mass of cobalt(II) nitrite, which can be calculated as follows:

Co(NO2)2Molar mass of Co = 58.93 g/molMolar mass of NO2 = 46.01 g/mol (14.01 g/mol for N and 2x16.00 g/mol for O)Total molar mass = 150.95 g/molSo, one mole of cobalt(II) nitrite has a mass of 150.95 g.To find the number of moles of cobalt(II) nitrite in 4.57 grams, we divide the mass by the molar mass:4.57 g / 150.95 g/mol = 0.030 molNow, we can use the balanced chemical equation for the reaction that forms Co2+ and cobalt(II) nitrite to determine the amount of Co2+ that corresponds to 0.030 mol of cobalt(II) nitrite. The equation is:Co(NO2)2 + 2H2O + O2 → Co2+ + 2NO3- + 2H+According to the equation, 1 mole of Co(NO2)2 produces 1 mole of Co2+. Therefore, 0.030 mol of Co(NO2)2 will produce 0.030 mol of Co2+.Finally, we can use the molar mass of Co2+ to convert from moles to grams:0.030 mol Co2+ x 58.93 g/mol = 1.77 g Co2+So, 4.57 grams of cobalt(II) nitrite contain 1.77 grams of Co2+.

Lean more about grams here:

brainly.com/question/30599358

#SPJ11

The solubility of potassium nitrate in water at 20°C is 32 g/100 g water. The given solution contains only 15 g of [tex]KNO_3[/tex] in 100 g of water, which is less than the maximum amount of [tex]KNO_3[/tex] that can dissolve at that temperature.

Therefore, the solution is unsaturated. To make it saturated, an additional 17 g of [tex]KNO_3[/tex] would need to be added to reach the maximum solubility of 32 g/100 g water. If more than 32 g of [tex]KNO_3[/tex] were added to the solution, the excess would not dissolve and would form a precipitate at the bottom of the container. It is important to note that the solubility of [tex]KNO_3[/tex] in water varies with temperature, and higher temperatures generally result in higher solubility.

To know more about potassium nitrate, here

brainly.com/question/30618191

#SPJ4

--The complete Question is, What is the solubility of potassium nitrate (KNO3) in water at 20°C, and will a solution containing 15 g of KNO3 in 100 g of water be saturated or unsaturated at that temperature? If the solution is unsaturated, how much more KNO3 would need to be added to make it saturated? The solubility of KNO3 in water at 20°C is 32 g/100 g water, which means that 32 g of KNO3 can dissolve in 100 g of water at that temperature. Since the solution in this question contains only 15 g of KNO3 in 100 g of water, it is unsaturated. To make it saturated, an additional 17 g of KNO3 would need to be added.--