Answer:
Note that the angle of lap is 165 degrees at the question above
So the power (kW) transmitted when the belt runs at 13 m/s and centrifugal force is included = 3.79782kW
Explanation:
Centrifugal force, Fc = pAv^2
Where p = density, A = c.s.a. v = veelocity
= 11x100 kg/m3 X 4x100 mm2 X (13 m/s)^2
= 1100 kg/m3 X 400 mm2 x 10^-6 X 169m/s
= 74.36N
P v (f - Fc) (1-e^-μθ)
The θ = (165 degrees ÷ 180 degrees) X π = 2.878 rads (π = 3.14)
So power p, = 10 (637 N - 74.36N) (1 - e^-0.39 x 2.878)
= 10 X 562.64 X 0.675
P = 3797.82 watts = 3.79782kW
What is the function of an energy source?
1. Stop the flow of electricity
2.Open and close the circuit
3.Begin the flow of electricity
4.Slow down the electrons
A heater has resistance of 10 ohms. It operates at 120 volts. a. What is the current through the heater?
Answer:
I = 12 A
Explanation:
For this exercise we use the relationship that voltage is proportional to the product of current and resistance
V = I R
I = V / R
let's calculate
I = 120/10
I = 12 A
13. A tow-truck applies a force of 2,000 N on a 2,000 kg car for a period of 3 seconds. What is the magnitude of
the change in the car's momentum?
Answer:
The Formula is
Change in Momentum = Force * Time
or /\P= F/\t
Plug the numbers into that formula,
P=(2,000N)(3S)
Now Multiply
Your Change in Momentum (Or P) would be 6,000N*s
Please Give Brainliest/5 stars <3
The magnitude of the change in the car's momentum = 6000 N.s
What is change in momentum ?The rate of change of momentum is equal to impulse . It is the change in the product of mass and velocity of the body or it can be calculated as force times time period for which force is been applied
Change in momentum = impulse(if change occur for few seconds ) = Force * time period
given
Force = 2000 N
mass = 2000 kg
time = 3 seconds
Change in momentum = 2000 * 3 = 6000 N.s
The magnitude of the change in the car's momentum = 6000 N.s
learn more about Change in momentum :
https://brainly.com/question/6270239?referrer=searchResults
#SPJ3
Perhaps the greatest of the Greek astronomers, Hipparchus compiled the first catalog of stars, 49) accurately measured their positions, and defined the basic system of stellar brightnesses which we now call the magnitude system. A particular star in his catalogue has an apparent magnitude of 4 and an absolute -12. Determine the distance to the star.
Answer:
Explanation:
it would be 3 because ju divide 12 by 4
One long wire lies along an x axis and carries a current of 39 A in the positive x direction. A second long wire is perpendicular to the xy plane, passes through the point (0, 4.4 m, 0), and carries a current of 47 A in the positive z direction. What is the magnitude of the resulting magnetic field at the point (0, 0.80 m, 0)
Answer:
Explanation:
Magnetic field due to a long current carrying wire can be calculated as follows .
B = 10⁻⁷ x 2I / d where B is magnetic field , I is current .
The wire is along x -axis and the point is on y-axis at a distance of 0.8 m
Magnetic field at point of .8 m on y -axis
B₁ = 10⁻⁷ x 2 x 39 / 0.8
= 97.5 x 10⁻⁷ T .
Second wire is parallel to z-axis and passes through point on y-axis at a distance of 4.4 m . So the given point is at a distance of 4.4 - .8 = 3.6 m
Magnetic field
B₂ = 10⁻⁷ x 2 x 47 / 3.6
= 26.11 x 10⁻⁷ T .
Both these magnetic fields are perpendicular to each other so
Resultant magnetic field
B = √ ( 26.11² + 97.5² ) x 10⁻⁷ T
= √( 681.73 + 9506.25 ) x 10⁻⁷ T
= √( 10187.98) x 10⁻⁷ T
= 100.93 x 10⁻⁷ T .
A cell has an emf of 4,5 V.
8.1 What does this statement mean?
Answer:
it means a cell has 4.5Volt of electromtive force.
a person is sitting on the last bench can see clearly see things written on book but cannot see them distinctly on board. what types of lens is this concave or convex
Answer:
I think concave
Explanation:
A current 2a flows in a circuit fir 2 minutes. Calculate the charge generated in a circuit
Answer:
the charge generated in the circuit is 240 C.
Explanation:
Given;
current flowing in the circuit, I = 2A
time of current flow, t = 2 minutes = 2 x 60s = 120 s
The current flowing through a given circuit is defined as the quantity of charge flowing through the circuit in a given time.
[tex]I = \frac{Q}{t} \\\\Q = I t[/tex]
where;
Q is the charge flowing in the circuit
Q = 2 x 120
Q = 240 C
Therefore, the charge generated in the circuit is 240 C.
The lens labelled (B) has radius 16.5cm on the curved side. Using the shape of the lens to assign the sign of the radius, calculate the focal length of the lens. Give your answer with the correct positive or negative sign using the usual convention for lenses.
Answer:
convex f = 33 cm
concave f = -33 cm
Explanation:
In geometric optics the focal length of a lens is given by
[tex]\frac{1}{f} = ( n-1) \ (\frac{1}{R_2} - \frac{1}{R_1} )[/tex]
where n is the refractive index of the medium, R₁ and R₂ are the focal lengths on each side of the lens.
In this case one of the sides is flat so its focal length is infinite, if the lens is convex the focal length is positive, convergent lens and if it is concave the focal length is negative, divergent lens.
[tex]\frac{1}{f} = (n-1) \ \frac{1}{R}[/tex]
the refractive index of the glass is n = 1.5
let's calculate
1 / f = (1.5 -1) 1 / 16.5
1 / f = 0.03030
f = 33 cm
convex f = 33 cm
concave f = -33 cm
A 7.5 cm tall Aragorn action figure is placed 12.4 cm in front of a double convex lens. If the image of Aragorn is located 7.5 from the lens, what is the focal length of the lens?
Answer:
f = 4.67 cm
Explanation:
Here, we can use the thin lens formula, as follows:
[tex]\frac{1}{f}= \frac{1}{p}+ \frac{1}{q}\\\\[/tex]
where,
f = focal length of lens = ?
p = distance of object from lens = 12.4 cm
q = distance of image from lens = 7.5 cm
Therefore,
[tex]\frac{1}{f} =\frac{1}{12.4\ cm} +\frac{1}{7.5\ cm}\\\\\frac{1}{f} = \frac{1}{4.67\ cm}[/tex]
f = 4.67 cm
As part of a physics experiment, you carry a bathroom scale calibrated in newtons onto an elevator and stand on it. At rest, you check the scale and it reads 588 N. Then the elevator starts accelerating upward at 2.0 m/s2 and you check the reading again. Now what does the scale show
Answer: 708 N
Explanation:
Given
At rest, Elevator reads 588 N
When it starts moving upward at [tex]2\ m/s^2[/tex], apparent weight changes
i.e. weight can be given by
[tex]\Rightarrow W'=m(g+a)\\\Rightarrow W'=mg+mg\cdot \dfrac{a}{g}\\\\\Rightarrow W'=W\left(1+\dfrac{a}{g}\right)\\\\\Rightarrow W'=588\left(1+\dfrac{2}{9.8}\right)\\\\\Rightarrow W'=707.99\approx 708\ N[/tex]
The apparent weight is 708 N
How strong is the repulsive force exerted on two point charges that each carry 1.0 E-6 C of negative charge and are 0.30 meters apart?
Coulomb's Constant is 9.0 E9 N*m2/C2
Remember to identity all of your data, write the equation, and show your work.
F = Kq₁q₂/(r)²
K is a constant
R is the distance between them
F = 9.0 E9 × 1.0 E-6 × 1.0 E-6/(0.30)²
= 9.0E-3/0.30² = 9.0E-3/0.09 = 0.1 N
The electrostatic force of repulsion between two charges can be determined using Coulomb's law of electrostatic force. The force of repulsion between the point charges of magnitude 1 ×10 ⁻⁶ C separated by 0.30 m is 0.1 N.
What is Coulomb's law of electrostatic forces?According Coulomb's law of electrostatic forces, the force between two charges q1 and q2 separated by a distance of r meters is given by the expression:
F = K q1 q2/r²
Where, K is Coulomb's Constant equal to 9.0 ×10⁹ Nm²/C²
Given q1 = q2 = 1 ×10 ⁻⁶ C
r = 0.30 m
k = 9.0 ×10⁹ Nm²/C².
Then the electrostatic force of repulsion between the two point charges is calculated as follows:
F = 9.0 ×10⁹ Nm²/C² × 1 ×10 ⁻⁶ C × 1 ×10 ⁻⁶ C/ (0.30 m )²
= 0.1 N.
Therefore, the repulsive force exerted on two point charges that each carry 1.0 E-6 C of negative charge and are 0.30 meters apart is 0.1 N.
Find more on Coulomb's law:
https://brainly.com/question/9261306
#SPJ3
A 620 nm light falls on a photoelectric surface and electrons with the maximum kinetic energy of 0.14 eV are emitted. (a) Determine the work function (in eV). eV (b) Determine the cutoff frequency of the surface (in THz). THz (c) What is the stopping potential (in V) when the surface is illuminated with light of wavelength 420 nm
Answer:
(a) The work function is 1.86 eV.
(b) The cut off frequency is 450 THz.
(c) The stopping potential is 1.16 V.
Explanation:
incident wavelength = 620 nm
Kinetic energy, K = 0.14 eV
According to the photoelectric equation
E = W + KE
where, W is the work function, KE is the kinetic energy.
(a) Let the work function is W.
[tex]W = E - KE\\W = \frac{h c}{\lambda }- KE\\W =\frac{6.63\times 10^{-34}\times3\times 10^{8}}{620\times 10^{-9}\times 1.6\times 10^{-19}}-0.14\\\\W =1.86 eV[/tex]
(b) Let the cut off frequency is f.
W = h f
[tex]1.86\times 1.6\times 10^{-19} = 6.63\times 10^{-34}\times f\\f = 4.5\times 10^{14} Hz =450 THz[/tex]
(c) Let the stopping potential is V.
[tex]E = W + eV\\\frac{6.63\times 10^{-34}\times 3\times 10^{8}}{420\times 10^{-9}\times 1.6\times 10^{-19}}=1.8 + eV\\\\V = 1.16 V[/tex]
3) A 30 kg child slides freely across a "Slip and Slide" on LEVEL GROUND. While the child slides, the force applied to keep them sliding is 0 N. The coefficient of kinetic friction is 0.02. What is the acceleration experienced by the child?
Answer:
a = 0.1962 m/s^2
Explanation:
The magnitude of kinetic friction exerted is given by
[tex]F_k=\mu_kN[/tex]
Where, μ_k= coefficient of kinetic friction= 0.02 and N = reaction force = mg
Where m= mass = 30 Kg and, g is acceleration due to gravity =9.81 m/s^2
F_k=0.02×30×9.81 =5.886 N
Now, since, there is no applied force this kinetic friction force will cause acceleration of the child
⇒ ma = F_k
here, a is the acceleration
⇒30a = 5.886
⇒ a = 0.1962 m/s^2
Which of the following is NOT a reason why humans sleep?
Sleep helps to restore and repair brain tissue.
Sleep restores and rebuilds memories.
Sleep provides a psychic safety valve to discharge unacceptable feelings.
During sleep, growth hormone is released, especially in children.
Answer and Explanation:
The answer is the second answer choice. This is because we humans can rebuild or build memories during the day, it doesn't have to happen via sleep.
The first answer choice IS a reason because you aren't working your brain as hard, so your brain has time to heal. A mouse study suggests that sleep helps restore the brain by flushing out toxins that build up during waking hours.
The third answer choice IS a reason because of the idea of Wish Fulfillment: Sigmund Freud suggested that dreams provide a psychic safety valve to discharge unacceptable feelings. The dream's manifest (apparent) content may also have symbolic meanings (latent content) that signify our unacceptable feelings.
The forth answer choice IS a reason because of the idea of Cognitive Development: Some researchers argue that we dream as a part of brain maturation and cognitive development.
#teamtrees #PAW (Plant And Water)
The first law of thermodynamics (which states that energy is conserved) does not specify the direction in which thermodynamic processes in nature can spontaneously occur.
a. True
b. False
Answer:
a. True
Explanation:
The law of conservation of Energy states that energy cannot be destroyed but can only be converted or transformed from one form to another. Therefore, the sum of the initial kinetic energy and potential energy is equal to the sum of the final kinetic energy and potential energy.
Mathematically, it is given by the formula;
Ki + Ui = Kf + Uf .......equation 1
Where;
Ki and Kf are the initial and final kinetic energy respectively.
Ui and Uf are the initial and final potential energy respectively.
The First Law of Thermodynamics is another way to describe the Law of Conservation of Energy. Typically, the First Law of Thermodynamics states that the change of internal energy of a system is equal to the sum of external work and heat spent on the system.
Mathematically, the First Law of Thermodynamics is given by the formula;
ΔU = Q − W
Where;
ΔU represents the change in internal energy of a system.
Q represents the net heat transfer in and out of the system.
W represents the sum of work (net work) done on or by the system.
Hence, the direction in which any thermodynamic process in nature can spontaneously occur isn't stated by the First Law of Thermodynamics.
When the palmaris longus muscle in the forearm is flexed, the wrist moves back and forth. If the muscle generates a force of 53.5 N and it is acting with an effective lever arm of 2.25 cm , what is the torque that the muscle produces on the wrist
Answer:
1.20Nm
Explanation:
Given data
Force= 53.5N
Perpendicular distance= 2.25cm= 2.25/100= 0.0225m
The expression for the torque is given as
Torque= Force* Perpendicular distance
Torque= 53.5*0.0225
Torque= 1.20Nm
Hence the toque produced is 1.20Nm
Describe the process of how a bill becomes a law in at least 4-5 sentence
Answer:
Step 1: A Bill Is Born
Anyone may draft a bill; however, only members of Congress can introduce legislation, and, by doing so, become the sponsor(s). The president, a member of the cabinet or the head of a federal agency can also propose legislation, although a member of Congress must introduce it.
Step 2: Committee Action
As soon as a bill is introduced, it is referred to a committee. At this point the bill is examined carefully and its chances for passage are first determined. If the committee does not act on a bill, the bill is effectively "dead."
Step 3: Subcommittee Review
Often, bills are referred to a subcommittee for study and hearings. Hearings provide the opportunity to put on the record the views of the executive branch, experts, other public officials and supporters, and opponents of the legislation.
Step 4: Mark up
When the hearings are completed, the subcommittee may meet to "mark up" the bill; that is, make changes and amendments prior to recommending the bill to the full committee. If a subcommittee votes not to report legislation to the full committee, the bill dies. If the committee votes for the bill, it is sent to the floor.
Step 5: Committee Action to Report a Bill
After receiving a subcommittee's report on a bill the full committee votes on its recommendation to the House or Senate. This procedure is called "ordering a bill reported."
Step 6: Voting
After the debate and the approval of any amendments, the bill is passed or defeated by the members voting.
Step 7: Referral to Other Chamber
When the House or Senate passes a bill, it is referred to the other chamber, where it usually follows the same route through committee and floor action. This chamber may approve the bill as received, reject it, ignore it, or change it.
Step 8: Conference Committee Action
When the actions of the other chamber significantly alter the bill, a conference committee is formed to reconcile the differences between the House and Senate versions. If the conferees are unable to reach agreement, the legislation dies. If agreement is reached, a conference report is prepared describing the committee members' recommendations for changes. Both the House and Senate must approve the conference report
Step 9: Final Action
After both the House and Senate have approved a bill in identical form, it is sent to the president. If the president approves of the legislation, he signs it and it becomes law. Or, if the president takes no action for ten days, while Congress is in session, it automatically becomes law.If the president opposes the bill he can veto it; or if he takes no action after the Congress has adjourned its second session, it is a "pocket veto" and the legislation dies.
Step 10: Overriding a Veto
If the president vetoes a bill, Congress may attempt to "override the veto." If both the Senate and the House pass the bill by a two-thirds majority, the president's veto is overruled and the bill becomes a law.
Explanation:
good luck!
Gold-198 is a radioactive isotope, and it has a half-life of about 2.5 days.
You have 100 grams of Gold-198. How many grams remain after 20 days?
3.125 grams
1.5625 grams
0.78125 grams
0.390625 grams
Answer: 0.390625 grams
Explanation:
A half-life of an element is the amount of time that it takes for half the mass of the element to decay.
Gold-198 having a half-life of 2.5 days therefore means that every 2.5 days, the mass is cut in half.
If there are 20 days, find out how many half-life periods there are:
= 20 / 2.5
= 8 periods
The half life is:
= Original mass * 0.5^number of half-life periods
= 100 * 0.5⁸
= 0.390625 grams
How can a tennis ball and a bowling ball have the same momentum ?
A tennis ball and a bowling ball can have the same momentum. This is because, it depends upon both the mass of object and velocity of object.
What is Momentum?Momentum can be defined as the mass in motion. All objects which have mass so, if an object is moving in space, then it has some amount of momentum which has its mass in motion. The amount of momentum which an object has depend upon two variables which include how much stuff is moving that is the mass of object and how fast the stuff is moving that is the speed.
A fast-moving tennis ball may have the same momentum as a slow-bowling ball. It is important to understand here that the momentum of an object which depends on the product of the mass and velocity of an object, but not the mass or the velocity alone.
Learn more about Momentum here:
https://brainly.com/question/30487676
#SPJ6
What are three ways a driver can cause a car to accelerate?
A. Turn the key in the ignition while the car is stopped.
B. Turn the steering wheel while the car is moving.
C. Press the gas pedal while the car is stopped.
D. Press the brake pedal while the car is moving.
Answer:
B,C,D
Explanation:
Ap3X
An observer views four identical objects that are traveling at speeds close to
the speed of light. Can their lengths be used to rank the objects according to
their speeds?
Answer:
D
Explanation:
yes. The shortest object is traveling the fastest.
No,their lengths be used to rank the objects according to their speeds. Because the length of the object is depended on the frame of reference of the observer. Option A is correct.
What is frame of reference?A frame of reference is a mathematical and physical coordinate system whose origin, direction, and scale are given by a collection of reference points.
Because the length of each item is determined by the observer's frame of reference, If an observer is stationary yet traveling at near light speed, he will feel length contraction.
Otherwise, the length of the items should not alter for everyday pace.A spectator sees four identical objects flying at almost the speed of light.
No,their lengths be used to rank the objects according to their speeds. Because the length of the object is depended on the frame of reference of the observer.
Hence,option A is correct.
To learn more about the frame of reference to refer to the link;
https://brainly.com/question/12222532
#SPJ2
A child is holding a wagon from rolling straight back down in a driveway that inclined at 20 degree horizontal. if the wagon weigh 150n with what force must the child pull on the handle if the handle is parallel to the incline?
Answer:
F = 51.3°
Explanation:
The component of weight parallel to the inclined plane must be responsible for the rolling back motion of the car. Hence, the force required to be applied by the child must also be equal to that component of weight:
[tex]F = Parallel\ Component\ of\ Weight\ of\ Wagon= WSin\theta\\[/tex]
where,
W = Weight of Wagon = 150 N
θ = Angle of Inclinition = 20°
Therefore,
[tex]F = (150\ N)Sin\ 20^o[/tex]
F = 51.3°
The diagram shows a toy car on a number line.
A line with arrowheads at both ends has ticks marks every 2 units. The tick marks for 0, 6, and 10 are labeled. A car sits above the tick mark for 2 with a dashed red line leading to the tick mark.
What is the position of the car?
–4
1
2
4
Answer: c.2
Explanation:
Answer:
The Answer is c. 2
Explanation:
I literally just got done with the quiz
Suppose that the Department of Energy develops a new reversible engine that has a coefficient of performance (COP) of 4.0 when operated as a refrigerator and a COP of 5.0 when operated as a heat pump. What is its thermal efficiency when operated as a heat engine doing work
Answer:
η = 0.2 = 20%
Explanation:
The relationship between the thermal efficiency of a heat engine and the Coefficient of Performance (COP) of the corresponding Heat Pump is given as follows:
[tex]\eta = \frac{1}{COP_{HP}}[/tex]
where,
η = thermal efficiency = ?
[tex]COP_{HP}[/tex] = Coefficient of Performance of Heat Pump = 5
Therefore,
[tex]\eta = \frac{1}{5} \\\\[/tex]
η = 0.2 = 20%
If an object is located 20 m to the right of the origin at 1:00PM and later the object is located 30 m to the left of the origin at 2:00PM, then the displacement from 1:00PM to 2:00PM is,
Answer: 50 m
Explanation:
Given
The object is located 20 m to the right of origin at 1:00 PM and later it moved 30 to the left of the origin.
total displacement from its original place is the subtraction of the two place units i.e.
[tex]\Rightarrow 30-(-20)\\\Rightarrow 30+20=50\ m[/tex]
In an immersion measurement of an odd-shaped metal object, the weight of the object is found to be 980 N when submerged in water. When it is submerged in a heavier Bromine liquid (density 3100 kg/m3), the object weighs 840 N. What is the volume of this object
Answer: [tex]0.00680\ m^3[/tex]
Explanation:
Given
The weight of the object, when submerged in the water is [tex]980\ N[/tex]
When it is submerged in the bromine liquid, it weighs [tex]840\ N[/tex]
Suppose,
[tex]\rho=\text{Density of object}\\\rho_w=\text{Density of water}\\\rho_b=\text{Density of bromine}\\V=\text{Volume of the object}[/tex]
for water,
[tex]\Rightarrow V(\rho -\rho_w)g=980\quad \ldots(i)[/tex]
For bromine
[tex]\Rightarrow V(\rho-\rho_b)g=840\quad \ldots(ii)[/tex]
Divide (i) and (ii)
[tex]\Rightarrow \dfrac{\rho-1000}{\rho-3100}=\dfrac{980}{840}\\\\\Rightarrow 840\rho -840\times 1000=980\rho-980\times 3100\\\\\Rightarrow 140\rho=(3038-840)\cdot 1000\\\\\Rightarrow \rho=15,700\ kg/m^3[/tex]
Put the density value in equation (i)
[tex]\Rightarrow V(15,700-1000)\cdot 9.8=980\\\\\Rightarrow V=\dfrac{100}{14,700}\\\\\Rightarrow V=0.00680\ m^3[/tex]
Which element would have properties most like helium (He)?
A. Ar
B. Hg
C. H
D. O
Answer: A. Ar
Explanation: not anything else besides Ar
A 400 kg satellite is in a circular orbit at an altitude of 500 km above the Earth's surface. Because of air friction, the satellite eventually falls to the Earth's surface, where it hits the ground with a speed of 1.60 km/s. How much energy was transformed into internal energy by means of air friction
Answer:
E = 1.45 x 10⁹ J = 1.45 GJ
Explanation:
According to the law of conservation of energy:
Potential Energy Lost by Satellite = Kinetic Energy + Internal Energy
[tex]mgh = \frac{1}{2} mv^2 + E\\\\E = mgh - \frac{1}{2} mv^2[/tex]
where,
E = Internal Energy = ?
m = mass = 400 kg
g = acceleration due to gravity = 9.81 m/s²
h = height = 500 km = 500000 m
v = speed on ground = 1.6 km/s = 1600 m/s
Therefore,
[tex]E = (400\ kg)(9.81\ m/s^2)(500000\ m)-\frac{1}{2} (400\ kg)(1600\ m/s)^2\\E = 1.962\ x\ 10^9\ J - 0.512\ x\ 10^9\ J[/tex]
E = 1.45 x 10⁹ J = 1.45 GJ
A metal with work function 1.17 eV is illuminated with light of wavelength 437 nm. What stopping potential is required for the photoelectrons
Answer: [tex]1.67\ V[/tex]
Explanation:
Given
Work function [tex]\phi =1.17\ eV[/tex]
The wavelength of the light is [tex]\lambda =437\ nm[/tex]
Energy associated with this wavelength is
[tex]E=\dfrac{hc}{\lambda}\\\\\Rightarrow E=\dfrac{1.99\times 10^{-25}}{437\times 10^{-9}}\\\\\Rightarrow E=4.553\times 10^{-19}\ J\\\\\Rightarrow E=2.841\ eV[/tex]
Stopping potential is
[tex]V=\dfrac{E-\phi }{e}\\\\\Rightarrow V=\dfrac{\left(2.841-1.17\right)e}{e}\\\\\Rightarrow V=1.67\ V[/tex]