Answer:
0.6 seconds
Explanation:
The time to fall from height h is ...
t = √(2h/g)
t = √(2(1.86 m)/(9.8 m/s^2)) ≈ √0.3796 s ≈ 0.616 s
It would take about 0.6 seconds for the projectile to hit the ground.
Answer:
0.6 seconds
is ur answer :)
✌❤
Heat flows from __________ energy to __________ energy.
A. higher, lower
B. lower, higher
Answer:
A. higher, lower
Explanation:
Hope this helps! :3
plz mark as brainliest!
Cumulative Exam
Cumulative Exam Review
Active
2
Which best compares concave and plane mirrors?
Plane mirrors produce only virtual images, and concave mirr
Plane mirrors produce only real images, and concave mirror
Concave mirrors produce only real images, and convex mirro
Answer:
Explanation:
Hi! It would be A. Plane mirrors produce only virtual images,and concave mirrors produce real and virtual images.
Plane mirrors construct only virtual images, and concave mirrors make real and virtual images. Thus, this statement best corresponds concave and plane mirrors.
What are virtual images?A virtual image exists represented as the opposite of a real image, thus an image that cannot be obtained on a screen stands produced as a virtual image. The motivation for this exists in the fact that the beams of light that form a virtual image never connect therefore a virtual picture can never be projected onto a screen. Examples: Image formed in a plane mirror, an image constructed on the front and back surfaces of a spoon, etc.
Therefore, the (A) option exists as the accurate answer.
To learn more about the virtual image, refer here :
https://brainly.com/question/9861899
#SPJ2
5. Define joint
answer asap plz and ty
Answer:
A point at which parts of an artifical structure are joined
How can you drop two eggs the fewest amount of times, without them breaking?
Answer:
Both eggs are identical. The aim is to find out the highest floor from which an egg will not break when dropped out of a window from that floor. If an egg is dropped and does not break, it is undamaged and can be dropped again. However, once an egg is broken, that's it for that egg.
Two carts connected by a 0.25 m spring hit a wall, compressing the spring to 0.1 m. The spring constant k is 100 N m . What is the elastic potential energy stored from the spring's compression?
Given that,
Initial position of the spring, x₁ = 0.25 m
Final position of the spring, x₂ = 0.1 m
The spring constant of the spring, k = 100 N/m
To find,
The elastic potential energy stored from the spring's compression.
Solution,
The work done in moving a spring from on position to another is stored in the form of elastic potential energy. It can be given as follows :
[tex]E=\dfrac{1}{2}k(x_2^2-x_1^2)\\\\=\dfrac{1}{2}\times 100\times (0.1^2-0.25^2)\\\\=2.62\ J[/tex]
So, the required energy is 2.62 J.
Answer:
1.125 J
Explanation:
The correct answer is 1.125 J
part 1 of 2
A neutron in a reactor makes an elastic
head-on collision with the nucleus of an atom
initially at rest.
Assume: The mass of the atomic nucleus is
about 11.1 the mass of the neutron.
What fraction of the neutron's kinetic en-
ergy is transferred to the atomic nucleus?
part 2 of 2
In the initial kinetic energy of the neutron
is 1.77 x 10^-13 J. find its final kinetic energy.
Answer in units of J.
Answer:
for part 1 the answer is 0.303
Explanation:
Conclusion When there is a constant unbalanced force applied in the same direction as the motion, speed will ___________________ and acceleration will _____________________________. When there is an increasing unbalanced force applied in the same direction as the motion, speed will ___________________ and acceleration will ________________________. When there is a constant unbalanced force applied in the opposite direction as the motion, speed will ___________________ and acceleration will ________________________. When there is an increasing unbalanced force applied in the opposite direction as the motion, speed will ___________________ and acceleration will ________________________.
Explanation:
When there is a constant unbalanced force applied in the same direction as the motion, speed will increase and acceleration will remain constant. When there is an increasing unbalanced force applied in the same direction as the motion, speed will increase and acceleration will increase.
According to newton's 2nd law
F = ma
F ∝ a
meaning when F increases , a increases and vice versa
Is this statement true or false?
Line spacing refers to the amount of space between each line in a paragraph.
true
false
Answer:
True
Explanation:
I just took the test and got 100
You are classifying an organism that is unfamiliar to you.
Which characteristic would be most helpful in identifying it?
A. energy source
B. behavior
C. structure
D. communication
O E. movement
Answer:
I know that we can identify it
Explanation:
C. structure
Answer:
C
Explanation:
In order to know what organism is it, you must obeserve its structure, behavior, movement but the most important is structure.
Changes of state occur when there is a change in:
Thermal energy
Electromagnetic energy
Chemical energy
Electrical energy
A 18000 Hz wave has wavelength of 0.03 meters. How fast is this wave
traveling?
Answer:
540m/s
Explanation:
Given parameters:
Frequency of the wave = 18000Hz
Wavelength of the wave = 0.03m
Unknown:
How fast is the wave traveling = ?
Solution:
How fast the wave is traveling is a measure of the speed of the wave;
Speed of wave = frequency x wavelength
Now insert the given parameters and solve;
Speed of wave = 18000 x 0.03 = 540m/s
If you weight 100 pounds on earth how much would you weight on the moon
Answer:
You should weigh about 16 pounds.
Explanation:
To find this, you need to find your weight and divide it by 6 to find your weight on the moon.
The pattern shown in the photo is the result of a time-lapsr video of a clear night sky
Which mostly likely causes the apparent motion of the stars seen in this photo?
A. Earth's revolution around the Sun
B. The revolution of the Stars around the Sun
C. Earth's rotation on its axis
D. The revolution of the stars
around Earth
Answer:
C.
Explanation:
Answer:
C
Explanation:
The earths rotation on its axis
6. What force causes the convection cell to turn down at point C?
What happens when plate subducts and reaches the mantle
Answer:
burns
Explanation:
Which statement compares the attractive forces that hold particles together?
If a bicycle has an average acceleration of -0.44 m/s^2, and its initial forward velocity is 8.2 m/s, how long will it take the cyclist to bring the bicycle to a complete stop
Answer:
The value is [tex]t = 18.6 s[/tex]
Explanation:
From the question we are told that
The average acceleration of the bicycle is [tex]v = -0.44 \ m/s^2[/tex]
The initial forward velocity is [tex]u = 8.2 \ m/s[/tex]
Generally from kinematic equations we have that
[tex]v = u + at[/tex]
Here v is the final velocity of the bicycle and the value is v = 0 m/s
So
[tex]0 = 8.2 + (-0.44)t[/tex]
=> t = 18.6 s
The energy transferred between objects in contact as of temperature difference is called what?
Answer:
Heat
Explanation:
Answer:
Heat conduction, also called diffusion, is the direct microscopic exchange of kinetic energy of particles through the boundary between two systems.
Explanation:
Newton's first law of motion: Objects in motion will stay in motion and objects at rest will stay at rest, unless acted on by
a. friction
b. acceleration
c. unbalanced force
d. contact force
Newton's first law states that every object will remain at rest or in uniform motion in a straight line unless compelled to change its state by the action of an external force. This is normally taken as the definition of inertia
A car weighing 12,000 N is parked on a 36° slope. The car starts to roll down the hill. What is the acceleration of the car?
Answer: 5.8 m/s squared
Explanation: just got that question lol
What statement provides an example of designing a solution in the technological design process? Aerospace engineers need a lightweight material to build a jet. Engineers determine which features the material must have. Engineers test a carbon-plastic compound in a wind tunnel. The carbon-plastic compound is redesigned to save maximum energy.
Answer:
Engineers determine which features the material must have.
Explanation:
The statement provides an example of designing a solution in the technological design process is B. Engineers determine which features the material must-have.
what is the procedure for designing answers to technological issues?Steps of the technological layout system encompass: pick out trouble, research the hassle, generate possible answers, pick out the fine solution, create a version, test the model, refine and retest the model as wished, and talk the final answer.
What is a design solution?The design answer definition can be used to generate the quit product specifications with a view to be used to produce the product and to conduct product verification. This technique may be in addition delicate depending on whether or not there are extra subsystems of the quit product that need to be defined.
Learn more about Design solutions at https://brainly.com/question/5690102
#SPJ2
Force is measured in what unit? What is this unit equal to in other units?
Force is measured in Newton ( kg.m. /s²)
if you know how to SHiFT in sleep how do you do it
Something that causes significant personal stress, appears strange to others,
and
is a psychologícal disorder.
O A. is a split from reality
OB. impairs one's ability to function
OC. includes hallucinations
OD. happens across cultures
Answer:
Impairs one's ability to function
Explanation:
Answer:
Impairs one's ability to functionExplanation:
I just took the test
Complete the following sentences.
mento
When you drop a ball, it falls to the ground,
This happens because the
pulls the ball
towards it with a force called
I
Forces are measured in units called
(Total 3 marks)
For a given force as time ___
the impulse related to that force increases. *
A. increases
B. decreases
Answer:
Increases
Explanation:
For a given force, as the time increases, the impulse related to that force increases also.
Impulse and time are directly related to one another. Impulse is mathematically given as:
I = F t
I is the impulse
F is the force
t is the time taken
So, as both force and time increases, the value of the impulse must increase.
what is gravity ?short ans
Answer:
Gravity, or gravitation, is a natural phenomenon by which all things with mass or energy—including planets, stars, galaxies, and even light—are brought toward one another. On Earth, gravity gives weight to physical objects, and the Moon's gravity causes the ocean tides.
Neha and Suhani are playing with two identical pendulums. They leave the bob from a certain position and wait for it to return to the same point. The one who waits for a shorter time wins. Neha leaves her pendulum from point L and Suhani leaves her pendulum from point P (see figure). What happens?
a. Neha wins as her bob comes back faster.
b. Suhani wins as her bob comes back faster.
c. No one wins as the bobs come back at the same time.
d. We cannot say any of the above for sure.
Answer:
The correct option is C
Explanation:
The pendulum bob would return at the same time because the initial angle a pendulum bob is dropped does not affect it's period (the time it takes for the pendulum to move back and forth), however the one with a larger angle move faster but would eventually arrive at the same "starting point" due to varying displacements made.
c. No one wins as the bobs come back at the same time.
The pendulum bob would return at the same time because the initial angle a pendulum bob is dropped does not affect it's period (the time it takes for the pendulum to move back and forth), however the one with a larger angle move faster but would eventually arrive at the same "starting point" due to varying displacements made.The longer the length of string, the farther the pendulum falls; and therefore, the longer the period, or back and forth swing of the pendulum. The greater the amplitude, or angle, the farther the pendulum falls; and therefore, the longer the period.)Learn more:
brainly.com/question/12886217
A concrete block of mass 35kg is pulled along a horizontal floor with the aid of a rope inclined at an angle of 30⁰ to the horizontal. If the coefficient of friction is 0.75, Calculate the force required to move the block( g = 10 ms⁻²)
A. 401.5 N
B. 226.5 N
C. 211.5 N
D. 245. 7N
Answer:
C. 211.5 N
Explanation:
We included a free body diagram representation of the concrete block. The equation of equilibrium in the x-direction:
[tex]\Sigma F_{x} = P\cdot \cos \alpha -\mu_{k}\cdot N = m\cdot a[/tex] (1)
[tex]\Sigma F_{y} = N + P\cdot \sin \alpha -m\cdot g = 0[/tex] (2)
Where:
[tex]P[/tex] - External force exerted on the block, measured in newtons.
[tex]N[/tex] - Normal force from the ground to the block, measured in newtons.
[tex]\alpha[/tex] - Direction of the external force, measured in sexagesimal degrees.
[tex]\mu_{k}[/tex] - Kinetic coefficient of friction, dimensionless.
[tex]m[/tex] - Mass of the concrete block, measured in kilograms.
[tex]g[/tex] - Gravitational acceleration, measured in meters per square second.
[tex]a[/tex] - Net acceleration of the concrete block, measured in meters per square second.
The minimum force to move block occurs when net force is zero, from (2) we get that the normal force is:
[tex]N = m\cdot g -P\cdot \sin \alpha[/tex]
And by applying this formula in (1), we get that the external force is:
[tex]P\cdot \cos \alpha - \mu_{k}\cdot (m\cdot g -P\cdot \sin \alpha) = m\cdot a[/tex]
[tex]P\cdot \cos \alpha -\mu_{k}\cdot m\cdot g +\mu_{k}\cdot P\cdot \sin \alpha = 0[/tex]
[tex]P\cdot (\cos \alpha +\mu_{k}\cdot \sin \alpha)=\mu_{k}\cdot m\cdot g[/tex]
[tex]P = \frac{\mu_{k}\cdot m\cdot g}{\cos \alpha +\mu_{k}\cdot \sin \alpha}[/tex]
If we know that [tex]\mu_{k} = 0.75[/tex], [tex]m = 35\,kg[/tex], [tex]g = 10\,\frac{m}{s^{2}}[/tex] and [tex]\alpha = 30^{\circ}[/tex]. then the external force is:
[tex]P = \frac{(0.75)\cdot (35\,kg)\cdot \left(10\,\frac{m}{s} \right)}{\cos 30^{\circ}+0.75\cdot \sin 30^{\circ}}[/tex]
[tex]P \approx 211.518\,N[/tex]
The correct answer is C.