a problem solving method that involves trying all possible solutions until one works is using_____.

Complete question is;

Shoveling snow can be extremely taxing since the arms have such a low efficiency in this activity. Suppose a person shoveling a sidewalk metabolizes food at the rate of 800 W. (The efficiency of a person shoveling is 3%.)

(a) What is her useful power output? (b) How long will it take her to lift 3000 kg of snow 1.20 m? (This could be the amount of heavy snow on 20 m of footpath.) (c) How much waste heat transfer in kilojoules will she generate in the process?

Answer:

A) P_out = 24 W

B) t = 1470 s

C) Q = 1140.72 KJ

Explanation:

We are given;

Input Power; P_in = 800 W

Efficiency; η = 3% = 0.03

A) Formula for efficiency is;

η = P_out/P_in

Making P_out the subject, we have;

P_out = η•P_in

P_out = 0.03 × 800

P_out = 24 W

B) We know that;

Power = work done/time taken

Thus;

P_out = mgh/t

We are given;

m = 3000 kg

h = 1.20 m

Thus, time is;

t = (3000 × 9.8 × 1.2)/24

t = 1470 s

C) amount of heat wasted is calculated from;

Q = (P_in - P_out)t

Q = (800 - 24) × 1470

Q = 1,140,720 J

Q = 1140.72 KJ

The process by which rock minerals are changed by natural processes into new substances is known as chemical weathering. Option A is correct.

The breakdown or dissolution of rocks and minerals on the Earth's surface is referred to as weathering.

Weathering is the erosion or disintegration of rocks, building materials, etc., induced by chemical interactions dissolved in it rather than by mechanical processes.

Water, ice, acids, salts, plants, animals, and temperature variations are all weathering agents.

Chemical weathering is the process by which rock minerals are transformed into new compounds by natural processes.

Hence, option A is correct.

To learn more about weathering refer;

https://brainly.com/question/14426457

#SPJ2

Answer:

2) center mass

3) when work is done by a system, energy is released

Explanation:

Answer:

v = 12 m/s

Long, boring, and convoluted explanation:

First, let's lay out our information.

- max height = 3.7 m

- 0 = 45°

- gravitational acceleration constant = 9.8 [tex]\frac{m}{s^2}[/tex]

Since the puma leaves the ground at a 45 ° angle, its motion will follow a curved path as seen in many projectile motion problems, where the object is being influenced solely by the force of gravity. And because the puma leaves the ground at an angle, its initial velocity is broken down into its horizontal and vertical components. We were also told, though indirectly, that the max height is  3.7m  because the puma can reach up to that height. Gravity is always given to be 9.8 [tex]\frac{m}{s^2}[/tex]

Because we are dealing with maximum height and gravity, we have to use the vertical component of the velocity,  vsin ( θ ) , and not the horizontal component, vcos ( θ ) .

Given its max height, the acceleration due to gravity, and the angle, we can now solve for the speed at which the puma leaves the ground using the following equation: vsin ( θ )  = [tex]\sqrt{2hg}[/tex]

Where vsin ( θ )  is the vertical component of the initial velocity and h  and g are max height and gravitational acceleration constant respectively.

Plugin, rearrange and solve

v sin ( θ )  =  [tex]\sqrt{2hg}[/tex]

v sin ( 45 ∘ )  =   √ 2  ×  3.7  ×  9.8

v ( 0.71 )  =  [tex]\sqrt{72.52}[/tex]

v ( 0.71 )  =  8.52

v  =  8.52 /0.71

v =  12 m s

Answer:

The answer is "[tex]945\ N[/tex]"

Explanation:

Aluminum has 210 megapascals of tensile resistance. They choose a shear force only at bent foil edge to bend aluminum foil over an edge (that is the edge of its box) to pull them. When a roll of aluminium domestic foil is 30 cm in width and about 15.0 micrometers.

[tex]\to 0.000015 \times 0.300 = 0.0000045\\\\\to 210000000 = \frac{F}{0.0000045}\\\\\to F=210000000 \times 0.0000045\\\\\to F = 945\ N[/tex]

Answer:

a) Longest wavelength is: [tex]\lambda_{1}=2*0.75=1.5\: m[/tex]

b) The frequency associated with this longest wavelength is: [tex]f=86.7\: Hz[/tex]

Explanation:

a)

The wavelength equation of a standing wave is given by:

[tex]\lambda_{n}=\frac{2}{n}L[/tex]

Where:

We use n=1 to find the longest possible wavelength, so we will have:

[tex]\lambda_{1}=2L[/tex]

[tex]\lambda_{1}=2*0.75=1.5\: m[/tex]

b)

The speed of the wave is given by:

[tex]v=f\lambda[/tex]

So we just need to find the f (frequency).

[tex]f=\frac{v}{\lambda}[/tex]

[tex]f=\frac{130}{1.5}[/tex]

[tex]f=86.7\: Hz[/tex]

I hope it helps you!

Answer:

cause we hear differently

Explanation:

Answer:

As the amplitude of the sound wave increases, the intensity of the sound increases. Sounds with higher intensities are perceived to be louder. Relative sound intensities are often given in units named decibels (dB)

Answer:

All electromagnetic radiation, of which radio waves and X-rays are examples, travels at the speed c in a vacuum. The only difference between the two is that the frequency of X-rays is very much higher than radio waves

I

think

Answer:

is.......

it has several other objects in its original, though few are as massive as itself........

Answer:

my teachers have always taught me that a dwarf planet cannot have other objects in its orbit seeing that the gravitational force will make it collide with the planet or push it out of the orbit. hope it helps xx

Answer:

1 μF

Explanation:

To obtain the answer to the question, all we need to do is to calculate the equivalent capacitance of the capacitors. This can be obtained as illustrated below.

From the question given above, the following data were obtained:

Capacitor 1 (C₁) = 2 μF

Capacitor 2 (C₂) = 4 μF

Capacitor 3 (C₃) = 4 μF

Equivalent capacitance (Cₑq) =?

Cₑq = 1/C₁ + 1/C₂ + 1/C₃

Cₑq = 1/2 + 1/4 + 1/4

Cₑq = (2 + 1 + 1)/4

Cₑq = 4/4

Cₑq = 1 μF

Thus, the answer to the question is 1 μF

Answer:

The angular speed of the blade is of 166.67 rad/min

If a radial saw has a blade with a 9-in. radius. Suppose that the blade spins at 1000 rpm then the angular speed of the blade would be 104.72 rad/seconds.

The total distance covered by any object per unit of time is known as speed. It depends only on the magnitude of the moving object. The unit of speed is a meter/second. The generally considered unit for speed is a meter per second.

The mathematical expression for speed is given by

speed = total distance /Total time

As given in the problem If a radial saw has a blade with a 9-in. radius. Suppose that the blade spins at 1000 rpm then we have to find the angular speed of the blade,

the angular speed of the blade (ω) = 2πN/60

                                                          =2×π×1000/60

                                                          = 104.72 rad/seconds

Thus, the angular speed of the radial saw would be 104.72 rad/seconds

To learn more about speed from here,refer to the link;

https://brainly.com/question/7359669

#SPJ2

Answer:

The wavelength of a wave with the frequency of 330hz and a speed of 343m/s would be 1.04m

Explanation:

You can get the wavelength of a wave by dividing the speed of the wave by its frequency, which in this case would be:

343/300, which as a decimal number, it'd be 1.04.

I hope I helped you, and a "Brainliest" is always appreciated! ☺

Answer:

Speed of bike = 2.5 km/h

Distance travel = 1,000 km (Approx.)

Explanation:

Given:

Distance cover by Helmut = 5 km

Time taken = 2 hour

Find:

Speed of bike

Computation:

Speed = Distance / Time

Speed of bike = 5 / 2

Speed of bike = 2.5 km/h

Given:

Speed of plane = 250 km/h

time taken = 3 hr 58 min = 3.967 hr

Find:

Distance travel

Computation:

Distance = Speed x time

Distance travel = 250 x 3.967

Distance travel = 991.669

Distance travel = 1,000 km (Approx.)

Answer:

Yes it is important.

Explanation:

It is important because we should preserve our food with safety as we would take it in the next day so if we we will not take safety then many germs can enter in that food and if we eat that food we could get sick . If we keep the food uncovered so anything can happen like any insect can fall in the food and we didn't know it it or any germs can enter in the food that is very harmful for our body so so we should keep the food covered and well preserved.

Answer:

Answer:

144.6ohms

Explanation:

v=IR

R =V/I=120/0.83

R=144.6

Answer:

True

Explanation:

Answer:

your answer is true hope this helps

Answer:

Explanation: Energy, potential energy, is stored in the covalent bonds holding atoms together in the form of molecules. This is often called chemical energy.

Answer:

Hope this helps!  can I have brainliest im trying to level up.

Explanation:

Bumper cars are a great place to see Sir Isaac Newton’s three laws of motion in action. Here’s how:

Newton’s First Law: Every object in motion continues in motion and every object at rest continues to be at rest unless an outside force acts upon it.

This is because all objects have inertia – the property of matter that resists changes to the object’s motion.

Newton found that if a ball is sitting on a table, it will stay sitting there because that is what it ‘wants’ to do.

If the ball is set in motion, it will keep traveling in a straight path because, again, that is what it ‘wants’ to do.

An object in motion will not stop, slow down, or change its direction unless an outside force acts on it (such as gravity, friction, and air resistance).

When you are riding in a bumper car and end up in a collision with another bumper car, you feel a jolt. This is because your body’s inertia wants it to keep traveling in the direction it was moving with the car even though your bumper car has now suddenly stopped.

Newton’s Second Law: The greater the mass of an object, the harder it is to change its speed.

(More force is needed to move it.)

You already know this law and practice it in your everyday life. Something that is small, such as a pebble, is much easier to pick up and throw than something that is large and heavy, such as a boulder.

When riding in the bumper cars, you may have noticed that people who weigh less tend to get pushed around more than people who weigh more.

The more mass (weight) an object has, the more force it takes to move it.

And since all the bumper cars usually have the same top velocity, the cars carrying more mass will never travel as far as the cars carrying less mass after a collision.

Newton’s Third Law: For every action, there is an equal and opposite reaction.

If two bumper cars traveling at the same speed and carrying the same amount of weight run into each other, they will bounce off and move an equal distance away from each other.

And based on the second law, if there is a difference in the amount of weight being carried in the two cars, the car with less weight will travel farther away from the point of impact than the car carrying more weight.

Answer: The mass of ball is 10 grams.

Explanation:

Given : Kinetic energy = 4.5 J

Velocity = 30 m/s

The formula for Kinetic energy is as follows.

[tex]K.E = \frac{1}{2}mv^{2}[/tex]

where,

K.E = Kinetic energy

m = mass

v = velocity

Substitute the values into above formula as follows.

[tex]K.E = \frac{1}{2}mv^{2}\\4.5 J = \frac{1}{2} \times m \times (30 m/s)^{2}\\m = \frac{4.5 J \times 2}{900 m^2/s^2} (1 Js^{2} = kg m^{2})\\= 0.01 kg (1 kg = 1000 g)\\= 10 g[/tex]

Thus, we can conclude that the mass of ball is 10 grams.

Answer:

25.2 ml

Explanation:

When the aluminium block is inserted in the container, the overall amount of only the water in the beaker can equal V o.

The weight of the water expelled by the plastic container should be equal to the weight of the aluminium block, according to the buoyancy balance relation.

i.e.

[tex]\rho_w V_wg = m_{Al}g = \rho_{Al}V_{Al} g \\ \\ V_w = \dfrac{\rho_{Al}V_{AL}}{\rho_{w}}[/tex]

When the aluminium block is inserted into the plastic container, the initial volume of water = 60 ml

[tex]V_i = V_o + V_w[/tex]

[tex]V_i = V_o + \dfrac{\rho_{Al}V_{Al}}{\rho_{w}}---(1)[/tex]

When the aluminium block is placed outside the container, the volume of the water

[tex]V_f = V_o +V_{Al} ---(2)[/tex]

By subtracting equation (1) and (2)

[tex]V_i -V_f = V_o + \dfrac{\rho_{Al} V_{Al}}{\rho_w}- ( V_o + V_{Al}}) \\ \\ =\dfrac{\rho _{Al}V_{Al}}{\rho_w}-V_{Al} \\ \\ = V_{Al} \Big( \dfrac{\rho_{Al}}{\rho_{w}}-1 \Big)[/tex]

since;

[tex]m_{Al} = 40 g[/tex]

[tex]V _{Al} = \dfrac{40 \ g}{2.7 \ g/cm^3} \\ \\ V_{Al} = 14.815 \ cm^3[/tex]

Similarly;

[tex]\dfrac{\rho_{Al}}{\rho_{w}}= \dfrac{2.7 }{1.0}[/tex]

= 2.7

[tex]V_i -V_f =14.815\Big( 2.7-1 \Big) \\ \\ V_i -V_f = 25.1855 \ ml \\ \\ = \mathbf{25.2 \ ml}[/tex]

Explanation:

Use the formula:

[tex] e = mc \delta \theta[/tex]

e is the energy released,

m is the mass of water,

c is the specific heat capacity,

δθ is the change in temperature ( 100 - 22)

Answer:

It would show a "straight line".

Explanation:

Newton's First Law of Motion states that an object at rest will remain at rest and an object in motion will remain in motion (at a constant velocity) unless acted upon by an unbalanced force. Newton's first law of motion is also called the law of inertia.