Answer:
Time = 2758.62 seconds
Explanation:
Given the following data;
Speed = 290 m/s
Distance = 800 km to meters = 800 * 1000 = 800000
To find the time;
Time = distance/speed
Time = 800000/290
Time = 2758.62 seconds
Therefore, it will take the pilot 2758.62 seconds to reach the airport.
Directions: Read each statement and determine if it is describing speed or
velocity. Write your answer on the space provided before the number.
1. Jackson ran 5k in 24 minutes.
2. A storm is travelling 25 km/hour eastward.
3. John walked 420 m in 17.5 seconds.
4. Zart moved the desk 34 cm to the left.
5. A hurricane travels 360 km in 15 hours.
6. Meredith runs 400 meters in 50 seconds.
7. Stephen Jay swims 110 m towards the shore in 72 seconds.
8. Vince throws a baseball 38 m from third base to first base in 1.7 seconds.
Answer:
Find answers below.
Explanation:
Velocity can be defined as the rate of change in displacement (distance) with time. Velocity is a vector quantity and as such it has both magnitude and direction.
Mathematically, velocity is given by the equation;
[tex]Velocity = \frac{distance}{time}[/tex]
Speed can be defined as distance covered per unit time. Speed is a scalar quantity and as such it has magnitude but no direction.
Mathematically, speed is given by the formula;
[tex]Speed = \frac{distance}{time}[/tex]
1. Speed: Jackson ran 5k in 24 minutes.
2. Velocity: A storm is travelling 25 km/hour eastward.
3. Speed: John walked 420 m in 17.5 seconds.
4. Velocity: Zart moved the desk 34 cm to the left.
5. Speed: A hurricane travels 360 km in 15 hours.
6. Speed: Meredith runs 400 meters in 50 seconds.
7. Velocity: Stephen Jay swims 110 m towards the shore in 72 seconds.
8. Velocity: Vince throws a baseball 38 m from third base to first base in 1.7 seconds.
AP Physics Question 3
A planet has two moons, Moon and Moon , that orbit at different distances from the planet’s center, as shown.
Astronomers collect data regarding the planet, the two moons, and their obits. The astronomers are able to estimate
the planet’s radius and mass.
3. The masses of the two moons are determined to be for Moon and for Moon . It is observed that
the distance between Moon and the planet is two times that of the distance between Moon and the
planet. How does force exerted from the planet on Moon compare to the force exerted from the planet on
Moon ?
The gravitational force exerted from the planet on Moon is two times larger than the gravitational force
exerted from the planet on Moon .
B
The gravitational force exerted from the planet on Moon is eight times larger than the gravitational force
exerted from the planet on Moon .
C
The gravitational force exerted from the planet on Moon is two times smaller than the gravitational force
exerted from the planet on Moon .
D
The gravitational force exerted from the planet on Moon is eight times smaller than the gravitational force
exerted from the planet on Moon .
Gravitational force increases as the mass increases and decreases as the distance between the bodies is increased.
The correct option is; The gravitational force exerted from the planet on Moon A is eight times larger than the gravitational force exerted from the planet on Moon B.Reasons:
The given parameters are;
The moons of the planet = Moon A and Moon B
Mass of Moon A = 2·M
Mass of moon B = M
The distance between Moon B and the planet = 2 × The distance between Moon A and the planet
Required:
Comparison (compare) of the force exerted from the planet on Moon A and Moon B.
Solution:
The force, F, exerted from the planet is the gravitational force which is given by Newton's Law of Gravitation as follows;
[tex]\displaystyle F = \mathbf{G \cdot \frac{M_{planet} \times M}{R^2}}[/tex]Where;
G = Universal gravitational constant
[tex]M_{planet}[/tex] = Mass of the planet
M = Mass of the Moon
R = The distance from the planet to the Moon
For Moon A, we have;
Mass = 2·M
Distance = R
Which gives;
[tex]\displaystyle F_A = G \cdot \frac{M_{planet} \times 2\cdot M}{R^2} = 2\cdotG \cdot \frac{M_{planet} \times M}{R^2} = \mathbf{2 \cdot F}[/tex]
With Moon B, we have;
Mass = M
Distance = 2·R
Therefore;
[tex]\displaystyle F_B = G \cdot \frac{M_{planet} \times M}{(2 \cdot R)^2} = G \cdot \frac{M_{planet} \times M}{4 \cdot R^2} = \frac{1}{4} \cdot G \cdot \frac{M_{planet} \times M}{R^2} = \mathbf{\frac{1}{4} \cdot F}[/tex]
Which gives;
[tex]\displaystyle \frac{F_A}{F_B} = \frac{2 \cdot F}{\frac{1}{4} \cdot F } =2 \times \frac{4}{1} = \mathbf{8}[/tex]
[tex]\displaystyle \frac{F_A}{F_B} = 8[/tex]
[tex]F_A = \mathbf{8 \times F_B}[/tex]
The force from the planet on Moon A, [tex]F_A[/tex], is 8 times the force from the planet on Moon B.
Therefore, whereby option B is;
The gravitational force exerted from the planet on Moon A is eight times larger than the gravitational force exerted from the planet on Moon B.The correct option is option B
Learn more about Newton's Law of gravitation here:
https://brainly.com/question/18670622
.) Identify the following quantities as scalar or vector: the mass of an object, the number of leaves on a tree, wind velocity.
a.) Vector, scalar, scalar
b.) Vector, scalar, vector
c.) Scalar, scalar, vector
d.) Scalar, vector, vector
Answer:
C
Explanation:
mass is a scalar quantity, number of anything is also a scalar quantity, since it lacks direction, and wind velocity is a vector quantity
The given quantities are classified as vector and scalar quantities;
mass of an object (scalar)the number of leaves (scalar)wind velocity (vector)Vector quantities are those quantities that have both magnitude and direction. Examples include the following;
velocity (m/s)acceleration (m/s²)force (N)weight (N)Scalar quantities are those quantities that have only magnitude but no direction. Examples include the following;
speeddistancemasswork, etcThus, from the explanation above, we can classify the given quantities as follows;
mass of an object (scalar)the number of leaves (scalar)wind velocity (vector)Learn more here: https://brainly.com/question/24700357
hey guys if anyone can help that would be amazing, this is due at noon
Answer:
a.45N
b.52.2N
c.36.45N
Explanation:
note:these answers are based on the fact that the acceleration due to gravity is 10m/s²
*.first of all the tension (T)in the cable is equivalent to the mass(m) of object multiplied by the sum of the opposite and parallel accelerations of the gravity and the elevator respectively.ie. g and a
now that being said mathematically the formula for tension in the cable is given by
T=m(g+a).
a).now for this situation the elevator is stationary,thus has not accelerated,
so a=0
then T=mg; where m=4.5kg g=10ms-²
therefore, T=4.5*10=45N.
b).here the elevator accelerated up, so a is positive.ie.+a
hence T=4.5(10+1.6)=52.2N.
c).here also the elevator accelerated down, so a is negative. is.-a
hence T=4.5(10-1.9)=36.25N.
I hope this will be of good help to you, you can contact me for further explanations or questions.
What type of local wind would most likely occur in the image below?
mountain breeze
sea breeze
valley breeze
land breeze
The correct answer is sea breeze
Answer:
Land breeze.
Explanation:
The breeze that blows from the land toward the sea after sunset. The land cools more quickly than the ocean, cooling the air above it. The warmer air above the water continues to rise, and cooler air from over the land replaces it, creating a breeze.
If continuous spectrum light from a star passes through a cool, low-density gas on its way to your telescope and spectroscope, ____ spectrum on the continuous spectrum results. If continuous spectrum light from a star passes through a cool, low-density gas on its way to your telescope and spectroscope, ____ spectrum on the continuous spectrum results. a bright (emission) line a dark (absorption) line continuous
Answer:
a dark (absorption) line.
Explanation:
A star is a giant astronomical or celestial object that is comprised of a luminous sphere of plasma, binded together by its own gravitational force.
It is typically made up of two (2) main hot gas, Hydrogen (H) and Helium (He).
Light wave can be defined as an electromagnetic wave that do not require a medium of propagation for it to travel through a vacuum of space where no particles exist.
A telescope can be defined as an optical instrument or device which comprises of a curved mirror and lenses used for viewing distant objects i.e objects that are very far away such as stars and other planetary bodies.
If continuous spectrum light from a star passes through a cool, low-density gas on its way to your telescope and spectroscope, a dark (absorption) line spectrum on the continuous spectrum results, which ultimately implies that the color is being absorbed and the absorption of specific frequencies of light by a hot gas.
A man pulls a sled at a constant velocity across a horizontal snow surface . If a force of 80 n is being applied to the sled at an 53 degree to the ground . What is the force of friction between sled and snow
Answer:
Explanation:
The force of 80N is applied on sled at 53⁰
Its horizontal component = 80cos53
= 48.14 N .
Its horizontal component will pull forward the sled and friction will prevent its forward motion . As sled is moving with constant velocity , net force on it is zero .
Hence forward push = frictional force
Frictional force = 48.14 N.
number of atoms of each element potassium chlorate?
Underground caves can form in limestone through deposition.
A.) False
B.) True
Answer:
I think the answer is option B
A car is traveling 50 mph. It leaves Boston, Massachusetts at 5 a.m. and is
traveling to Hartford, Connecticut, which is 100 miles away. Without traffic
problems or stops, about what time should the car arrive in Hartford?
explain a conventional method of heat transfer.
Conventional method of heat transfer.
Convection refers to a method of heat transfer where food is heated by a moving heat source such as hot air inside an oven that is circulated by a fan.How it works?
Convection occurs when particles with a lot of heat energy in a liquid or gas move and take the place of particles with less heat energy. Heat energy is transferred from hot places to cooler places by convection. Liquids and gases expand when they are heated. As a result, the particles take up more volume.For example:
Conventional ovens, which do not have fans, rely primarily on radiation from the oven walls, and to a lesser extent, on natural convection caused by temperature differences. The fans in convection ovens allow more heat to be transferred via convective heat transfer.Learn more:
brainly.com/question/16646491
AWARDING BRAINLIEST
The distance traveled by an object divided by the time it takes to travel that distance is called
a.
average velocity.
c.
average acceleration.
b.
average speed.
d.
activity.
Answer:
I'm really not that good at this but i think the answer is b
Explanation:
l'm really hoping this helped u
AP Physics Question
An amusement park ride consists of a large vertical wheel of radius that rotates counterclockwise on a horizontal
axis through its center, as shown above. The cars on the wheel move at a constant speed . Points and
represent the position of a car at the highest and lowest point of the ride, respectively. A person of weight sits
upright on a seat in one of the cars. As the seat passes point , the seat exerts a normal force with magnitude
on the person. While passing point , the person releases a small rock of mass , which falls to the ground
without hitting anything.
2. Which of the following best describes the passenger’s linear and angular velocity while passing point ?
A
Linear Velocity Angular Velocity
Constant Changing
B
Linear Velocity Angular Velocity
Constant Constant
C
Linear Velocity Angular Velocity
Changing Changing
D
Linear Velocity Angular Velocity
Changing Constant
The linear velocity is changing and the angular velocity is Constant best describes the passenger’s linear and angular velocity while passing a point.
What is the definition of Angular velocity?The rate of change of angular displacement is defined as angular speed, and it is stated as follows:
ω = θ t
Where,
θ is the angle of rotation,
t is the time
ω is the angular velocity
The linear velocity is given as the product of angular velocity and radius.
v=ωr
In the circular motion, the linear velocity is changing. Because the radius is changing.While the angular velocity is constant.Because it is an independent quantity.
Hence the Linear velocity is changing and the angular velocity is Constant best describing the passenger’s linear and angular velocity while passing a point.
To learn more about the angular velocity refer to the link;
https://brainly.com/question/13649539
Which of the following is NOT a component of skill-related fitness?
A.balance
B.speed
C. Power
D. Heart rate
Answer:
D
Explanation:
The 1st 3 are important components
sorry for miss spells
If an acid and a base react, the product(s) will be ____.
A salt
Neutral water
A salt and water
A metal and water
pls help me to draw it . I will make you brianliest
What's a Blackhole ?
Answer:
A black hole is a region of spacetime where gravity is so strong that nothing—no particles or even electromagnetic radiation such as light—can escape from it. The theory of general relativity predicts that a sufficiently compact mass can deform spacetime to form a black hole.
When a pot of water sits on a hot stove the metal is He did and then transferred into heat to the world of student claims that conduction is the only type feet transfer occurring which statement explains why the students idea is incorrect
Answer:
Hello your question is poorly written hence I will just give the difference between conduction and convection
answer :
Conduction occurs when there is direct contact between solids and source of heat. while convection occurs when there is transfer of thermal energy due to movement of liquid or gas
Explanation:
when a pot of water is placed on a hot stove the pot is heated through conduction because the metal pot is in direct conduct with the heat from the stove ( which is the primary source of heat in this scenerio ).
while the heat transfer from the hot pot to the water is executed through convection this is because heat transfer via convection requires the movement of liquid or gas. as the warmer liquid moves over to the top the cooler liquid goes below inside the pot that way the whole liquid becomes warm .
How many protons does Silicone have
A.2
B.14
C.28
D.28.08
Answer:
14
Explanation:
the left top is protons
hope this helps :)
In which of the following is a skater NOT accelerating?
A-going straight while speeding up
B-going straight at constant speed
C-making circles at constant speed
D-going straight while slowing down
what substance might impact the formation of volcanic rock?
marking brainliest!
Answer:
Magma is less dense than the surrounding rock which causes it to rise. When magma reaches the surface it is then called lava and the eruptions of lava and ash produce volcanoes. The lava that reaches the Earth's surface will harden and become igneous rock.
Convert 350.0mL at 740 K to its new volume at standard temperature
Answer:
129.12 ml
Explanation:
If answer is correct feel free to replay me for explanation.
If a net force acting on a moving object causes its speed to increase, what
happens to the object's momentum?
A. It stays the same.
B. It increases.
C. It changed directions.
D. It decreases.
Answer:
It increases.
Explanation:
If a force acts in the same direction as the object's motion, then the force speeds the object up. Either way, a force will change the velocity of an object. And if the velocity of the object is changed, then the momentum of the object is changed.
26. A liquid with a low viscosity
a. has a definite shape
b. fills its container
c. flows quickly
d. flows slowly
Answer:
flows quickly and needs to be like paper
Answer:
c
Explanation:
it flows very quickly since it has a low viscosity
Write the word conduction, convection or radiation in the blanks in front of 1-13
1.
Walking on the hot sand on a beach
2.
A ceiling fan forcing the warm air downward.
3.
Feeling heat from a campfire.
Chocolate candy melting in your hand.
5.
Air in the atmosphere rising and falling.
6.
Heat from the sun warming a swimming pool.
7.
Changing a light bulb while it's still hot.
8.
Heat from the hood of a car when you touch it.
9.
Feeling the heat from a stove burner without touching it.
10.
Boiling water moving in a circular motion
11. Energy that is transferred in waves or particles.
12. Energy that is transferred by direct contact.
13. Energy that is transferred through a fluid where hot rises and cold
sinks.
Answer:
1. conduction
2. convection
3. radiation
4. conduction
5. convection
6. radiation
7. conduction
8. conduction
9. radiation
10. convection
11. radiation
12. conduction
13. convection
Keegan has a wood ball, James has a steel ball, and Drew has a ping pong ball. If they all blow them with the same air force across a table using a straw, whose ball with will win the race?
Answer:
A ping pong ball
Explanation:
It has the lightest weight among the rest
A trampoline spring has a force constant k = 800 N/m and is stretched exactly 17.5cm. What is the energy required to do this?
Answer:
the energy required for the extension is 12.25 J
Explanation:
Given;
force constant of trampoline spring, k = 800 N/m
extension of trampoline spring, x = 17.5 cm = 0.175 m
The energy required for the extension is calculated as;
E = ¹/₂kx²
E = 0.5 x 800 x 0.175²
E = 12.25 J
Therefore, the energy required for the extension is 12.25 J
what does point c represent
Explanation:
point c is minimum Amplitude in transversal wave
Give an example of an atom that will give up its outermost electron easily. Explain why you chose this atom.
Answer:
Cesium (Cs)
very low electronegativity
there are a bunch of cool videos online about Cesium reacting with water
most are faked but the general idea is a cool one as Cesium very quickly and easily gives up it's one and only outermost (or valence) electron
Explanation:
Work is done when force is applied ____________________________________________?
Question options:
A. for a long period of time
B. in the opposite direction
C. in the same direction that the object moves
D. none of the above
Answer:
D none of the above
Explanation:
mark me brainlyest pls?