Answer:
Time = 0.317 seconds.
Explanation:
Given the following data;
Distance = 1.65km to meters = 1.65 * 1000 = 1650 meters
We know that the speed of sound in steel is equal to 5200m/s
To find the time to hear the sound of the whistle;
Time = distance/speed
Substituting into the equation, we have
Time = 1650/5200
Time = 0.317 seconds.
Therefore, it will take him 0.317 seconds to hear the sound of the whistle.
A centrifuge accelerates from rest to 12,000 rpm in 235s. What was the centrifuge's angular acceleration?
What is friction ridge skin?
Eve makes a simple series circuit using a battery and two light bulbs. Through how many paths will the current be able to travel in her circuit?
A) 1
B) 2
C) 3
D) 4
Answer:
2
Explanation:
and two light bulbs. Through how many paths will the current be able to travel in her circuit?
A) 1
B) 2
C) 3
D) 4
There are mainly two paths by which the current can travel in the circuit. Bulbs in an electrical circuit can be connected in series or in parallel arrangement. Thus, the correct option is B.
What is Current?
The current is the flow of charge (electron) in a circuit. When the two light bulbs are connected in series with two batteries, then each of the bulb shares the voltage drop equally with the other bulb. So, each bulb has half of the total voltage across the circuit. Each bulb has the voltage of one battery across it in the circuit. Each light bulb glows similar to the other if were connected to a single battery.
A series circuit can be constructed by connecting the light bulbs in such a manner that charge can flow in only a single pathway. More light bulbs can be added to the same line without any branching point. With the increase in the number of light bulbs added, the brightness of each light bulb gradually decreases as the current divides further.
Therefore, the correct option is B.
Learn more about Current here:
https://brainly.com/question/23323183
#SPJ2
True or false your vocal cords act like a guitar string when it comes to sound
Answer:
True
Explanation:
An 8 kg toddler is running at a speed of 10 m/s.
how much energy does he have?
In winter the air just above the top bunk of a bunk bed is warmer than the air just above the bottom bunk because warm air rises. Which of the following describes the method of heating that causes this difference in temperature?
Answer:
the heating method in here is conventional heating due to the warn air goes to the top bunk whereas the cold air sinks down
Which best represents the reaction of calcium and zinc carbonate (ZnCO3) to form calcium carbonate (CaCO3) and zinc? Ca → ZnCO3 + CaCO3 → Zn Ca + ZnCO3 → CaCO3 + Zn CaCO3 + Zn → Ca + ZnCO3 CaCO3 + Zn + Ca → ZnCO3
Answer:
Ca + ZnCO3 → CaCO3 + Zn
Explanation:
Ca + ZnCO₃ = CaCO₃ + Zn
Ca + ZnCO3 → CaCO3 + Zn is the answer.
Here Ca and ZnCO₃ are reactant and CaCO₃ and Zn are product . Reactants are written on the left side of equation and product are written on the right side.
Answer:
The correct option is, Ca + ZnCO3 —> CaCO3 +Zn
Explanation:I got it right.
If an object has a mass of 45 g and a volume of 5 mL, what is that object’s density? Show your calculation?
How is the Physics definition of momentum different from the ""colloquial"" use of momentum
Answer:
Explanation:
You know, I never really thought about this very much. I've always just thought of it as M * V. But when you look at a dictionary definition, it says it is the motion of a body.
That means that speed can be a momentum. Speed is independent of direction. So the colloquial definition does not take into account a change in direction as being very relevant.
The answer then is direction. When physics uses v, it is also counting direction.
What would be a good example of kinetic energy?
a broken bicycle
a spring that is stretched
a skier racing down a hill
a rock sitting at the top of a hill
Answer:
3) a skier racing down a hill
Explanation:
Remember kinetic energy is energy which a body possess by virtue of being in motion. So anything that is in motion will gain kinetic energy and lose potential energy. Answer 3 was the only object in motion. Kinetic energy is also named energy of motion.
A 1 cm2 silicon solar cell has a saturation current of 10A and is illuminated with sunlight yielding a short-circuit photocurrent of 25 mA. Calculate the solar cell efficiency and fill factor.
Answer:
The answer is "13% and 83%"
Explanation:
The highest power is generated for:
[tex]\to \frac{dP}{dV_a}=0= I_s(e^{\frac{V_m}{V_t}} -1)-I_{Ph} +\frac{V_m}{V_t} I_s e^{\frac{V_m}{V_t}}[/tex]
Where voltage, [tex]V_m[/tex], was its calculated maximum power wattage. This same following transcend national stable coins the power output:
[tex]\to V_m=V_t \ In \frac{1+\frac{I_{ph}}{I_s}}{1+\frac{V_{m}}{V_t}}[/tex]
The accompanying consecutive values of [tex]V_m[/tex] are done utilizing iteration and an initial value of 0.5 V:
[tex]\to V_m = 0.5,\ 0.542,\ 0.540 \ V[/tex]
Efficacy is equivalent to:
[tex]\eta = |\frac{V_{m} I_{m}}{p_{in}}| =\frac{0.54 \times 0.024}{0.1}=1.3\%[/tex]
Currently, [tex]I_m[/tex] was calculated with the formula of voltage [tex]V_m[/tex] (4.6.1) as well as the sun is presumed to produce [tex]100 \frac{mW}{cm^2}[/tex] of power.
The fulfillment factor is equal to:
fill factor[tex]= \frac{V_{m} I_{m}}{V_{oc}I_{sc}}= \frac{0.54 \times 0.024}{0.62 \times 0.025}=83\%[/tex]
where open circuit tension of equations (4.6.1) and I = 0. is calculated. The current is equal to the total current of the photo.
is the us warmer than antarctica?
Answer:
Yes
Explanation:
Antarctica is usually always cold.
Which of these is an example of work being done on an object a. Holding a heavy piece of wood at a construction site. b. Trying to push a car that doesn't move out of deep snow. c. Pushing a child on a swing. d. Holding a door shut on a windy day so it doesn't blow open.
Answer:
I would say the best choice, would be Choice C.
For all of these scenarios a force is being applied to displace an object. But the displacement occur in the case of trying to push a car and pushing a child on a swing. Thus, options b and c are correct.
What is work done?Work done in physics is the dot product of force and displacement. Therefore, every work done is associated with a force but not all force result in work done. Those force, which result in a displacement will do work done.
Holding a heavy piece of wood does not make a displacement in the object. Similarly, when we hold the door to stop we just apply a force and not displacing the door. In both cases work done is zero.
When we push a car to make it move and any movement from the side of the car result in a work done. Similarly in when we push a child in a swing we make the swing move a distance by applying force. Thus work is being done on the object.
To find more on work done, refer here:
https://brainly.com/question/13662169
#SPJ5
The hierarchy of traits is a structured progression of personality that begins with a few higher-order traits that result in
several lower-order traits, determining a person's response in a specific situation.
Please select the best answer from the choices provided
OT
OF
Answer:
true
Explanation:
hope u find this helpfull
A horizontal force of 164 N is applied to move a 55 kg television set across a 9 m level surface. What is the work done by the force on the television set?
Answer:
Workdone = 1476 Nm
Explanation:
Given the following data;
Force = 164 N
Mass = 55kg
Distance = 9 m
To find the work done;
Workdone = force * distance
Workdone = 164 * 9
Workdone = 1476 Nm
Therefore, the work done by the force on the television set is 1476 Nm.
A 10 V battery is connected to a voltage divider circuit
which consists of a 100 Ω resistor and a 300 Ω resistor.
a What is the voltage across the 300 Ω resistor?
A 2.5 V
B 3.3 V
C 7.5 V
D 13.3 V
b) What is the voltage drop across the 100 Ω resistor?
A 2.5 V
B 3.3 V
C 7.5 V
D 13.3 V
Answer:
a) C. 7.5 V
b) A. 2.5 V
Explanation:
First, we find the total resistance of the circuit. A voltage divider circuit is a series circuit. Therefore, its total resistance will be the sum of individual resistances:
[tex]R = R_{1}+R_{2}\\R = 100\ \Omega + 300\ \Omega\\R = 400\ \Omega\\[/tex]
a)
Now, we will apply the voltage divider rule on this circuit to find the voltage across the 300 Ω Resistor (R₂):
[tex]V_{2} = R_{2}\frac{V}{R}\\\\V_{2} = (300\ \Omega)\frac{10\ V}{400\ \Omega}\\\\[/tex]
V₂ = 7.5 V
Therefore, the correct option is:
C. 7.5 V
b)
Now, the voltage across the 100 Ω Resistor (R₁) will be:
[tex]V = V_{1}+V_{2}\\V_{1} = V-V_{2}\\V_{1} = 10\ V - 7.5\ V\\V_{1}=2.5\ V[/tex]
Therefore,the correct option is:
A. 2.5 V
Your family drives to the mountains one weekend. You drive 55miles for the first hour and the next 3 hours
you travel a distance of 180miles. What's your average speed for the 4 hours ?
Answer:Jane drives at an average speed of 45 mph on a journey of 135 miles.
Explanation:
PLEASE HELP!!! GIVING BRAINLIEST!! ill also answer questions that you have posted if you answer these correctly!!!! (30pts)
Answer:
Decreasing
Explanation:
The attractive force between two objects that depends on their masses and the distance between them is _______?
Answer:
gravitational force
Explanation:
an object with mass attractive another object with mass
ANSWER:
GRAVITATIONAL FORCE
EXPLANATION :
Gravitational force -an attractive force that exists between all objects with mass; an object with mass attracts another object with mass; the magnitude of the force is directly proportional to the masses of the two objects and inversely proportional to the square of the distance between the two objects.
A ball has 17 J of kinetic energy and its mechanical is 25 J
If the ball has a mass of 3.2 KG what is it’s height above ground?
Answer:
0.255m
Explanation:
The total mechanical energy of the ball is given 25 J. The potential energy of the ball is 8 J. Then, the height of the ball above the ground is 0.25 m.
What is kinetic energy ?Kinetic energy of an object is the energy generated by virtue of its motion whereas potential energy is generated by virtue of its position at a height from the ground.
The sum of kinetic and potential energy of the object is called its mechanical energy.
given Ke of the ball = 17 J
mechanical energy = 25 J
then potential energy = 25 J - 17 J = 8 J.
We have the relation between potential energy, mass and height h as :
p = mgh .
given the mass m = 3.2 kg
g = 9.8 m/s²
then, h = p / (mg)
h = 8 J / (3.2 kg× 9.8 m/s² )
= 0.25 m.
Therefore, the height of the ball above the ground is 0.25 m.
Find more on potential energy:
https://brainly.com/question/12807194
#SPJ6
10
Select the types of data that describe climate. (You may select more than one
correct answer)
one day's
Temperature
average ocean
depth
average
precipitation
annual wind
speed
Answer:
temperiture or annual wind speed.
Explanation:
the condition required to work to be done
Answer:
work=f(costheta)
Explanation:
work is done when a force acts on a body and displaces it on the direction of force
4. Zyan is trying to swim across the English Channel in a north to south direction
at 5km/h. There is a 2km/h west to east current in the channel. What is his
resultant swimming velocity?
A sock stuck to the side of a clothes-dryer barrel has a centripetal acceleration of
28m/s?. If the dryer barrel has a radius of 27.5cm, what is the tangential speed of the
sock?
Answer:
Tangential speed, V = 2.78 m/s.
Explanation:
Given the following data;
Centripetal acceleration = 28m/s²
Radius = 27.5cm to meters = 27.5/100 = 0.275 meters
To find the tangential speed;
Centripetal acceleration = V²/r
Substituting into the formula, we have;
28 = V²/0.275
V² = 28 * 0.275
V² = 7.7
Taking the square root of both sides, we have;
Tangential speed, V = 2.78 m/s.
The tangential speed of the sock will be 7.7 m/sec².Tangential speed is as the linear speed of any object travelling along a circular route.
What is tangential speed ?Tangential speed is defined as the linear speed of any item travelling along a circular route.
A point on the outside edge of a turntable travels further in one complete rotation than a point towards the center.
The given data in he problem is;
a is the centripetal acceleration =28m/s?
r is the radius of 27.5cm
v is the tangential speed of the sock=?
[tex]\rm a= \frac{v^2}{r} \\\\ \rm v= \sqrt{ar} \\\\ \rm v= \sqrt{28 \times 0.275 } \\\\ \rm v=7.7 \ m/sec^2[/tex]
Hence the tangential speed of the sock will be 7.7 m/sec².
To learn more about the tangential speed refer to the link;
https://brainly.com/question/17689540
Use each of the following terms in a separate
sentence: insulation, heat engine, and thermal
pollution.
The old farm house had been wrapped in insulation and sided.
refrigerator may be considered to be a heat engine operated in reverse.
The warmed water may become a thermal pollution problem in terms of the receiving body of water.
HELPP ILL GUVE YOU LOTS OF POINTS EVERYTHING U WANT I REALLY NEED HELP
Answer:
ok so I'm going left to right
a) 3 2 1 4
b) i don't know
There are 2 employees considered for a promotion. Candidate A went to a top university (say Harvard), and achieved a top GPA (grade point average) and is generally considered one of the most knowledgable employees in the company, but their colleagues often complain abut having to work with candidate A on projects. Candidate B's colleagues have lots of praise for how candidate B is able to work as a team at achieving common goals, but candidate B went to a local community college and didn't receive a very high GPA. Which candidate do you think will or should get the promotion?
Answer:
Canidate B
Explanation:
Becuase he/she is good to work with, and will most likely be more determined.
what units is time measured in
Answer:
The base unit for time is the second (the other SI units are: metre for length, kilogram for mass, ampere for electric current, kelvin for temperature, candela for luminous intensity, and mole for the amount of substance). The second can be abbreviated as s or sec.
Explanation:
Question 8 of 10
Which planet has the hottest average temperature?
O A. Neptune
O B. Venus
O C. Jupiter
O D. Earth
ASAP
2 disadvantages of a series circuit
Answer:
The first disadvantage is that, if one component in a series circuit fails, then all the components in the circuit fail because the circuit has been broken. The second disadvantage is that the more components there are in a series circuit, the greater the circuit's resistance*.
Explanation:
Hope this helped Mark BRAINLEST!!