Answer:
dgfggddhdbxbxjxddhsnsxnc
Lolliguncula brevis squid use a form of jet propulsion to swim—they eject water out of jets that can point in different directions, allowing them to change direction quickly. When swimming at a speed of 0.15m/s0.15m/s or greater, they can accelerate at 1.2m/s21.2m/s 2 .
(a) Determine the time interval needed for a squid to increase its speed from 0.15m/s0.15m/s to 0.45m/s0.45m/s.
(b) What other questions can you answer using the data?
Answer:
a) t = 0.25 s, b) x = 0.075 m
Explanation:
a) For this exercise we will use kinematic relationships in one dimension
v = v₀ + a t
in the problem they indicate the initial velocity v₀ = 0.15 m / s, the final velocity v = 0.45 m / s and the acceleration of the squid a = 1.2 m / s²
t = [tex]\frac{v -v_o}{a}[/tex]
we calculate
t = [tex]\frac{0.45 - 0.15}{1.2}[/tex]
t = 0.25 s
b) We can also find the distance traveled during this acceleration
v² = v₀² + 2a x
x = [tex]\frac{v^2 -v_o^2 }{2a}[/tex]
let's calculate
x = [tex]\frac{0.45^2 - 0.15^2 }{2 \ 1.2}[/tex]
x = 0.075 m
what is a asteroid traveling rapidly called
Answer:
meteor
Explanation:
A asteroid stays still and a meteor goes fast
Answer:
meteor
Explanation:
or some people call it a shooting star
A wire has a length of 0.50 m and measures about 0.50 mm in its cross-sectional radius. At normal temperature, what is its resistance in Ohms, if Aluminum has a resistivity of 2.82x10^-8 Ohms*meter
Answer:
Explanation:
For resistance , the expression is as follows .
R = ρ L / S where ρ is specific resistance , L is length of wire and S is cross sectional area .
cross sectional area = π x ( .5 x 10⁻³ )²
S = .785 x 10⁻⁶ m²
Putting the values
R = 2.82 x 10⁻⁸ x .50 / .785 x 10⁻⁶
= 1.796 x 10⁻² ohm .
kenneth ran a marathon (26.2 miles) in 5.5 hours. What was Kenneth’s average speed? (Round your answer to the nearest tenth.)
0.2 mph
4.8 mph
5.5 mph
144.1 mph
it is actually science i couldn't find the word science
Answer:
4.8mph
Explanation:
Speed= Distance/time
Speed= 26.2/5.5
= 4.76mph
( To the nearest tenth ) = 4.8mph
Answer:
38.7 mph
Explanation:
I just add all the numbers together then divided them by 4, which is the amount of numbers you gave.
what part of the electromagnetic spectrum can our skin detect?
Visible and infrared light.
You have three objects of varying shapes and sizes: Object 1 is a rectangular block of tin. Object 2 is a cube of aluminum. Object 3 is a sphere of copper.
a. the density of tin is 5.75g/cm2. What is the mass of object 1 in kg if the rectangular block has a volume of 1.34L?
b. what is the volume in cubic inches of object 2 if the cube of aluminum 7.58 inches on a side?
c. what is the mass in kg of object 2? the density of aluminum is 2.70g/cm3
d. what is the volume in cm3 of object 3 if the sphere of copper has a diameter 8.62cm? the volume of the sphere is 4 {pi}^3/3
e. what is the mass in kg of object 3? Copper has a density of 8.96g/cm3
Answer: a. m = 7.7 kg
b. V = 435.52 in³
c. m = 1927 kg
d. V = 335.37 cm³
e. m = 3 kg
Explanation: Density is the ratio of mass per volume, i.e., it's the measure of an object's compactness. Its representation is the greek letter ρ.
The formula for density is
[tex]\rho=\frac{m}{V}[/tex]
Density's unit in SI is kg/m³, but it can assume lots of other units.
Some unit transformations necessary for the resolution of the question:
1 L = 1 dm³ = 1000 cm³
1 in³ = 16.3871 cm³
1 g = 0.001 kg
a. V = 1.34 L = 1340 cm³
[tex]\rho=\frac{m}{V}[/tex]
[tex]m=\rho.V[/tex]
m = 5.75 * 1340
m = 7705 g => 7.705 kg
Mass of object 1 with volume 1.34L is 7.7 kg.
b. A cube's volume is calculated as V = side³
V = 7.58³
V = 435.52 in³
Volume of object 2 is 435.52 in³.
c. Using 1 in³ = 16.3871 cm³ to change units:
V = 435.52 * 16.3871
V = 713689.4 cm³
Then, mass will be
[tex]m=\rho.V[/tex]
m = 2.7 * 713689.4
m = 1926961.4 g => 1927 kg
Mass of object 2 is 1927 kg.
d. Volume of a sphere is calculated as [tex]V=\frac{4}{3}.\pi.r^{3}[/tex]
Diameter is twice the radius, then r = 4.31 cm.
Volume is
[tex]V=\frac{4}{3}.\pi.(4.31)^{3}[/tex]
V = 335.37 cm³
Volume of object 3 is 335.37 cm³.
e. [tex]m=\rho.V[/tex]
m = 8.96 * 335.37
m = 3004.91 g => 3 kg
Mass of object 3 is 3 kg.
Two masses are being pulled up a 30.0-degree incline by a force F parallel to the incline. The acceleration up the incline is 1.00 m/s2 and the velocity is down the incline. The force is applied to a 200-kg mass and a string connects the 200-kg mass to a 150-kg mass. The coefficient of kinetic friction is 0.200. The force F is
Answer:
Explanation:
The acceleration up the incline is 1.00 m/s²
Net force acting on two masses = total mass x acceleration
= 350 x 1 = 350 N
weight acting down the plane = m g sinФ
= 350 x 9.8 x sin30 = 1715 N
Friction force acting down the plane = mg cosФ x μ where μ is coefficient of friction
= 350 x 9.8 x cos30 x .2 = 594N
Net force acting on total mass
= F - 1715 - 594 = 350 , where F is required force
F = 2659 N .
Nikki was walking around a department store shopping one day, and did not realize that the shirt she was wearing looked just like the shirts worn by employees. When a stranger asked, "do you work here," she thought it was funny. The other customers' assumption that Nikki was a store employee demonstrates the Gestalt principle of _______.
Answer: Similarity
By.
You are given three pieces of wire that have different shapes (dimensions). You connect each piece of wire separately to a battery. The first piece has a length L and cross-sectional area A. The second is twice as long as the first, but has the same thickness. The third is the same length as the first, but has twice the cross-sectional area. Rank the wires in order of which carries the most current (has the lowest resistance) when connected to batteries with the same voltage difference.
Rank the wires from most current (least resistance) to least current (most resistance).
a. Wire of Lenght L and area A
b. Wire of Lenght 2L and area A
c. Wire of Lenght L and area 2A
Answer:
The answer is below
Explanation:
The resistance of a wire is directly proportional to the length of the wire and inversely proportional to its area. The resistance (R) is given by:
[tex]R=\frac{\rho L}{A}\\\\where\ L=length \ of\ wire,A=cross\ sectional\ area, \rho=resistivity\ of\ wire.[/tex]
Let us assume that all the wires have the same resistivity.
a) Wire of Length L and area A
[tex]R_1=\frac{\rho L}{A}[/tex]
b) Wire of Length 2L and area A
[tex]R_2=\frac{\rho *2L}{A}=2R_1[/tex]
C) Wire of Length L and area 2A
[tex]R_3=\frac{\rho L}{2A}=\frac{1}{2}R_1[/tex]
Therefore the wire of least resistance is R3 and R2 has the highest resistivity.
R₃ < R₁ < R₂
Therefore, the ranking of the wires from most current (least resistance) to least current (most resistance) is:
R₃ < R₁ < R₂
A bartender slides a beer mug at 1.3 m/s towards a customer at the end of a frictionless bar that is 1.3 m tall. The customer makes a grab for the mug and misses, and the mug sails off the end of the bar. (a) How far away from the end of the bar does the mug hit the floor
Answer:
x = 0.67 m
Explanation:
For this problem, let's use the projectile launch equations, as the jug goes through the bar, it comes out with horizontal speed vx = 1.3 m / s, which does not decrease as there is no friction.
Let's find the time or it takes to get to the floor
y = y₀ + v_{oy} - ½ g t²
in this case I go = 0 and when I get to the floor y = 0
0 = y₀ + 0 - ½ g t²
t² = 2y₀ / g
t² = 2 1.3 / 9.8 = 0.2653
t = 0.515 s
now let's find the distance traveled in this time
x = vx t
x = 1.3 0.515
x = 0.6696 m
x = 0.67 m
When a space shuttle takes off, the chemical reactions of the fuel give the shuttle the kinetic energy to leave Earth's atmosphere as shown in the figure below. The kinetic energy of the space shuttle is less than the potential energy of the fuel used. Which statement best explains this idea?
A.) The potential energy is used to overcome Earth’s gravity.
B.) The potential energy is also converted to light, thermal energy, and sound energy.
C.) The potential energy must be consumed to make the fuel burn.
D.) The potential energy is destroyed by the warmth of the reaction.
Answer:a
Explanation:
Because its has to use tihs potential energy to overcome the atmosphere so the shuttle will not go back down
Microbes such as bacteria have small positive charges when in solution. Public health agencies are exploring a new way to measure the presence of small numbers of microbes in drinking water by using electric forces to concentrate the microbes. Water is sent between the two oppositely charged electrodes of a parallel-plate capacitor. Any microbes in the water will collect on one of the electrodes.
Required:
a. On which electrode will the microbes collect?
b. How could the microbes be easily removed from the electrodes for analysis?
Answer:
The answer is below
Explanation:
a) Coulomb's law of electric force for charges at rest states that Like charges repel each other while unlike charges attract one another.
Therefore since the microbes has small positive charges, the microbe would be repelled by the positively charged electrodes and attracted by the negative charged electrodes.
Hence, the microbes would collect on the negatively charged electrodes.
b) The microbes can easily removed from the negative electrode for analysis by discharging the electrode from the source. Thereby making the electrode to be incapable of attracting the microbe.
What happens to the force attraction of the distance two objects is increased?
Answer:
Explanation:
The attraction weakens. Two objects that are farther apart are not drawn together as strongly as if they were close together.
In the absence of air resistance, ___ accelerates all objects at the same rate of 9.8 m/s2
Answer:
Gravity...this was proven by NASA and was examined by Leonardo da Vinci.
Answer:
Gravity
Explanation:
In the absence of air resistance, Gravity accelerates all objects at the same rate of 9.8 m/s2
A 12 V battery is connected across a device with variable resistance. As the resistance of the device increases, determine whether the following quantities increase, decrease, or remain unchanged. HINT (a) The current through the device. increases decreases remains unchanged (b) The voltage across the device. increases decreases remains unchanged (c) The power consumed by the device. increases decreases remains unchanged
Answer:
a) DECREASE, b) INCREASE, c) power remains constant
Explanation:
The resistance and the battery are connected in series.
a) How the current changes when the resistance changes
V = I R
I = V / R
I = 12 / R
if the resinification increases, the current must DECREASE
b) when you check the expression
V= I R
, if R increases the voltage of the INCREASE
c) the power in an electric circuit is
P = I V
Let's analyze this expression, the voltage increases linearly with the increase in resistance and the current decreases linearly with the increase in r, for which the two effects are compensated and the dissipated power remains constant
Anyone know this question?
A scientist reports a measurement of the temperature of the surface of a newly discovered planet as negative 20 Kelvin. What conclusion can you draw from this report
Answer:
The temperature of this newly discovered planet violates the third law of thermodynamic, there is a mistake in this value.
Explanation:
The third law of the Thermodynamic says:
At zero kelvin all molecular movement stops, which means that the entropy will be zero at this temperature.
So we can say there is no thermodynamic system that has temperature values less than 0 K.
The conclusion of the report will be.
The temperature of this new planet violates the third law of thermodynamic, there is a mistake in this value.
I hope it helps you!
Daffy Duck is standing 6.8 m away from Minnie Duck. The attractive gravitational force between them is 5.4x10-8 N. If Daffy Duck has a mass of 86.5 kg, What is Minnie Duck's mass?'
Answer:
432.78 Kg
Explanation:
From the question given above, the following data were obtained:
Distance apart (r) = 6.8 m
Force of attraction (F) = 5.4×10¯⁸ N
Mass of Daffy Duck (M₁) = 86.5 kg
Mass of Minnie Duck (M₂) =?
NOTE: Gravitational constant (G) = 6.67×10¯¹¹ Nm²/Kg²
The mass of Minnie Duck can be obtained as follow:
F = GM₁M₂ / r²
5.4×10¯⁸ = 6.67×10¯¹¹ × 86.5 × M₂ / 6.8²
5.4×10¯⁸ = 6.67×10¯¹¹ × 86.5 × M₂ / 46.24
Cross multiply
6.67×10¯¹¹ × 86.5 × M₂ =5.4×10¯⁸ × 46.24
Divide both side by 6.67×10¯¹¹ × 86.5
M₂ = 5.4×10¯⁸ × 46.24 / 6.67×10¯¹¹ × 86.5
M₂ = 432.78 Kg
Therefore, the mass of Minnie Duck is 432.78 Kg
Electric power is to be generated by installing a hydraulic turbine-generator at a site 120 m below the free surface of a large water reservoir that can supply water at a rate of 2300 kg/s steadily. Determine the power generation potential.
Answer:
the power generation potential is 2.705 x 10⁶ J/s.
Explanation:
Given;
height below the free surface of a large water reservoir, h = 120 m
mass flow rate of the water, m' = 2300 kg/s
The power generation potential is calculated as;
[tex]Power = \frac{Energy}{time} = \frac{F\times h}{t} = \frac{(mg) \times h}{t} = \frac{m}{t}\times gh = m' \times gh\\\\Power = m' \times gh\\\\Power = 2300 \ kg/s \ \times \ 9.8 \ m/s^2 \ \times \ 120 \ m\\\\Power = 2.705 \times 10^6 \ J/s[/tex]
Therefore, the power generation potential is 2.705 x 10⁶ J/s.
For each picture below identify the material and closing the sandwich as transparent translucent or opaque
A system with a mass of 10 kg, initially moving horizontally with a velocity of 20 m/s, experiences a constant horizontal force of 25 N opposing the direction of motion. As a result, the system comes to rest. Determine the amount of energy transfer by work, in kJ, for this process and the total distance, in m, that the system travels
Answer:
Explanation:
Kinetic energy of the mass of 10 kg
= 1/2 m v² , m is mass and v is velocity .
= .5 x 10 x 20²
= 2000 J
The opposing force stops it . so work done by opposing force will be equal to this energy and it will be negative .
So energy transfer will be - 2000 J .
= 2 kJ .
If distance travelled by mass is d , force 25 N will have a displacement of d . so work done by force of 25 N
= 25 x d
25 d = 2000
d = 80 m .
Hence system travels a distance of 80 m .
A car of mass 150 kg is riding down at constant velocity. What is the normal force?
The formula is ( Fg=mg ; Fnet =ma ; Fx = Fcos theta ; Fy = Fsin theta)
Answer and I will give you brainiliest
Answer:
1500N
Explanation:
Normal force = mg - F sin theta
constant velocity means acceleration = 0
F= ma = 150× 0 = 0N
thus;
normal force = mg = 150 × 10 = 1500N
Answer:
864N
Explanation:
The cart is given an initial push up the ramp. After this push, as the car moves up the ramp, the direction of the acceleration of the cart is ________ the ramp. After the reaches its highest point, turns around, and begins moving down the ramp, the direction of the acceleration of the cart is ________ the ramp. At the highest point the cart reaches on the ramp, when the cart momentarily comes to rest, the magnitude of the acceleration of the cart is _______.
Answer:
Explanation:
The only force acting on the cart is a component of its weight parallel to ramp downwards . No other force acts parallel to the ramp .
Even when the cart is moving up after the initial push , its weight is acting downwards so acceleration is acting downwards .
When the cart is stationary at the top position , its weight is acting downwards so acceleration is downwards at that moment also . When the cart is going downwards , still its weight is acting down so acceleration is acting downwards .
After this push, as the car moves up the ramp, the direction of the acceleration of the cart is _down _______ the ramp. After the reaches its highest point, turns around, and begins moving down the ramp, the direction of the acceleration of the cart is _down ________ the ramp. At the highest point the cart reaches on the ramp, when the cart momentarily comes to rest, the magnitude of the acceleration of the cart is _downwards ______.
Describe Kinetic Energy and Potential Energy (in your own words please!!)
Answer:
Energy stored in an object due to its position is Potential Energy. · Energy that a moving object has due to its motion is Kinetic Energy.
Explanation:
Where the air conditioner disconnecting means is not within sight from the equipment, the provision for locking or adding a lock to the disconnecting means shall be on the switch or circuit breaker and remain in place _____ the lock installed.
Answer:
With or without.
Explanation:
According to the National Electrical Code (NEC), here the air conditioner disconnecting means is not within sight from the equipment, the provision for locking or adding a lock to the disconnecting means shall be on the switch or circuit breaker and remain in place with or without the lock installed. Thus, this is in accordance with section 110.25 of the National Electrical Code (NEC).
A disk with radius R and uniform positive charge density s lies horizontally on a tabletop. A small plastic sphere with mass M and positive charge Q hovers motionless above the center of the disk, suspended by the Coulomb repulsion due to the charged disk.
Required:
a. What is the magnitude of the net upward force on the sphere as a function of the height z above the disk?
b. At what height h does the sphere hover?
Answer:
a. F = Qs/2ε₀[1 - z/√(z² + R²)] b. h = (1 - 2mgε₀/Qs)R/√[1 - (1 - 2mgε₀/Qs)²]
Explanation:
a. What is the magnitude of the net upward force on the sphere as a function of the height z above the disk?
The electric field due to a charged disk with surface charge density s and radius R at a distance z above the center of the disk is given by
E = s/2ε₀[1 - z/√(z² + R²)]
So, the net force on the small plastic sphere of mass M and charge Q is
F = QE
F = Qs/2ε₀[1 - z/√(z² + R²)]
b. At what height h does the sphere hover?
The sphere hovers at height z = h when the electric force equals the weight of the sphere.
So, F = mg
Qs/2ε₀[1 - z/√(z² + R²)] = mg
when z = h, we have
Qs/2ε₀[1 - h/√(h² + R²)] = mg
[1 - h/√(h² + R²)] = 2mgε₀/Qs
h/√(h² + R²) = 1 - 2mgε₀/Qs
squaring both sides, we have
[h/√(h² + R²)]² = (1 - 2mgε₀/Qs)²
h²/(h² + R²) = (1 - 2mgε₀/Qs)²
cross-multiplying, we have
h² = (1 - 2mgε₀/Qs)²(h² + R²)
expanding the bracket, we have
h² = (1 - 2mgε₀/Qs)²h² + (1 - 2mgε₀/Qs)²R²
collecting like terms, we have
h² - (1 - 2mgε₀/Qs)²h² = (1 - 2mgε₀/Qs)²R²
Factorizing, we have
[1 - (1 - 2mgε₀/Qs)²]h² = (1 - 2mgε₀/Qs)²R²
So, h² = (1 - 2mgε₀/Qs)²R²/[1 - (1 - 2mgε₀/Qs)²]
taking square-root of both sides, we have
√h² = √[(1 - 2mgε₀/Qs)²R²/[1 - (1 - 2mgε₀/Qs)²]]
h = (1 - 2mgε₀/Qs)R/√[1 - (1 - 2mgε₀/Qs)²]
HELP ASAP PLEASE
Which 2 factors must be present for chemical vapor deposition to be successful:
A.) The size of the diamond is larger than the most.
B.) The conditions during cooling are controlled.
C.) The heat in a vacuum forms a gas of single atoms.
D.) The heat in a vacuum is decreased to freezing.
E.) The pressure of a reaction vessel is negative.
Calculate the displacement and velocity at times of (a) 0.500, (b) 1.00, (c) 1.50, (d) 2.00, and (e) 2.50 s for a rock thrown straight down with an initial velocity of 14.0 m/s from the Verrazano Narrows Bridge in New York City. The roadway of this bridge is 70.0 m above the water
Answer:
See explanation below
Explanation:
This is a typical exercise of free falling. In this case a rock thrown straight down from the bridge, and we are asked to determine the final velocity of the rock and it's displacement at those given times.
First, just for this problem, as the rock is going straight down, we'll say that the downward direction is positive, therefore, the following expressions to calculate velocity and speed will be:
V = V₀ + gt (1)
X = V₀t + gt²/2 (2)
In this case, g = 9.8 m/s²
Now, let's see the displacement and velocity for each given time:
a) For t = 0.5 s
V = 14 + (9.8)*0.5
V = 18.9 m/s
X = (14*0.5) + (9.8)(0.5)²/2
X = 7 + 1.225
X = 8.225 m
b) For t = 1.00 s
V = 14 + (9.8)*1
V = 23.8 m/s
X = (14*1) + (9.8)(1)²/2
X = 14 + 4.9
X = 18.9 m
c) For t = 1.5 s
V = 14 + (9.8)*1.5
V = 28.7 m/s
X = (14*1.5) + (9.8)(1.5)²/2
X = 21 + 11.025
X = 32.025 m
d) For t = 2 s
V = 14 + (9.8)*2
V = 33.6 m/s
X = (14*2) + (9.8)(2)²/2
X = 28 + 19.6
X = 47.6 m
e) For t = 2.50 s
V = 14 + (9.8)*2.5
V = 38.5 m/s
X = (14*2.5) + (9.8)(2.5)²/2
X = 35 + 30.625
X = 65.625 m
Hope this helps
when air mass is caught between two cold fronts the result is a _______ front.
Answer choices
A.occluded
B.warm
C.cold
D.stationary
an always be used to calculate the electric field. relates the electric field at points on a closed surface to the net charge enclosed by that surface. relates the surface charge density to the electric field. relates the electric field throughout space to the charges distributed through that space. only applies to point charges.
Complete Question:
Gauss's law:
Group of answer choices
A. can always be used to calculate the electric field.
B. relates the electric field throughout space to the charges distributed through that space.
C. only applies to point charges.
D. relates the electric field at points on a closed surface to the net charge enclosed by that surface.
E. relates the surface charge density to the electric field.
Answer:
D. relates the electric field at points on a closed surface to the net charge enclosed by that surface.
Explanation:
Gauss's law states that the total (net) flux of an electric field at points on a closed surface is directly proportional to the electric charge enclosed by that surface.
This ultimately implies that, Gauss's law relates the electric field at points on a closed surface to the net charge enclosed by that surface.
This electromagnetism law was formulated in 1835 by famous scientists known as Carl Friedrich Gauss.
Mathematically, Gauss's law is given by this formula;
ϕ = (Q/ϵ0)
Where;
ϕ is the electric flux.
Q represents the total charge in an enclosed surface.
ε0 is the electric constant.